Tramex CME4 Concrete Moisture Meter Encounter

Description
Price: $477.00
Tramex CME4 Concrete Moisture Meter Encounter Non Destructive
Measurement method:
Non-destructive moisture measurement, 1/2" (12.5 mm) signal penetration depth
A pocket size non-destructive moisture meter designed to measure moisture content in concrete flooring prior to the application of floor coverings
Typical Applications: Concrete, Cement

A handheld electronic moisture meter used for testing moisture conditions in concrete and other floor slabs and screeds. Versatile, precise and easy to use, theTramex CME4 allows the user to make multiple tests over a large area in the shortest possible time

The CME4 Concrete Encounter detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The CME4 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial.

line
Operating procedure
line

To carry out tests simply brush any dust from a smooth area of concrete and also from the electrodes, switch on the Concrete Encounter CME4 and place it firmly onto the surface, fully compressing the spring-loaded, signal-enhancing contacts on the base. Read the moisture content from the clear analog dial. The CME4 is calibrated to give percentage moisture content readings on clean, bare dust free concrete floor slabs, with a depth of penetration of approx. ¾". Readings taken on concrete slabs through paint, coatings, adhesives or other materials on the surface should be regarded as qualitative or comparative and not quantitative


line
Photo Gallery
line

line
Features
line

  • Designed, developed and calibrated specifically for concrete.
  • Instant readings, measures up to 6% moisture content.
  • Non-destructive operation per ASTM F2659 (No drilling).
  • Large easy to read analog display.
  • "Hold" button freezes reading on analog meter.
  • Battery operated (Supplied).
  • Strong robust design.

line
Specifications
line

Size6" x 3.5" x 1.5" (150mm x 85mm x 38mm)
Weight9.84oz (279g)
ConstructionABS Body Power: 9 volt PP3
Batteryincluded
DisplayAnalog Depth of penetration: approx. ¾" (20 mm)
Measuring range:
Analog Depth of penetration: approx. ¾" (20 mm)0 to 6 %
Comparative for Gypsum floor screed0 to 10
Reference scale0 to 100


line
Related Products
line

Tramex WDZK5.1
Water Damage Restoration EZ Kit

  • Clear easy-to-read analog dial
  • Reproducible results. Spring-loaded contact pins compensate for uneven concrete and boost signal penetration
related

line

Tramex CMEX2
CMEXpert II Concrete Moisture Encounter Expert CMEX II

  • A digital version of the CME4 handheld electronic moisture meter, the Tramex CMEX II moisture meter is designed for the instant and precise measurement of moisture content in concrete and other floors and screeds
related

line

Tramex IRT2 
Infrared Surface Thermometer

  • The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms
related

line

Tramex FMK5.1
Flooring Master Kit

  • Industry: Flooring Inspection, Flooring Installation
  • Instant readings in Non-Destructive and Wood Probe modes
related


line
Downloads
line

Tramex CME4 Concrete Moisture Meter Encounter - Quick Guide
Tramex CME4 Concrete Moisture Meter Encounter - Instruction Manual
Tramex CME4 Concrete Moisture Meter Encounter - Data Sheet

line
Buy Now
line


Check the items you would like to purchase then click "Add To Cart"
ItemPrice
$477.00
AccessoriesPRICE
$135.00
$77.00
$135.00