Phone: 888 275 5772 281 516 9292 eFax: 866 234 0451

Product Description
Testex Coarse Grade Press-O-Film Replica Tape
Range: 0.8 to 2.5 mils / 20 to 64 microns
Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel.
50 tests per roll

Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple Testex Micrometer or PosiTector RTR Replica Tape Reader will allow you to take accurate, low-cost blast-surface profile measurements. Testex Press-O-Film makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.

The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.

Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.


line
Specifications
line

Testex Press-O-Film replica tape is available in a variety of thicknesses to facilitate profile measurement in differing ranges:

Testex Press-O-Film Replica Tape, Medium Grade (5-75 microinch / 0.1-2 microns) 50/Roll Testex Press-O-Film Replica Tape, Coarse Minus Grade (0.5-1.0 mils / 12-25 microns) 50/Roll Testex Press-O-Film Replica Tape, Coarse Grade (0.8-2.5 mils / 20-64 microns) 50/Roll Testex Press-O-Film Replica Tape, Medium Grade (5-75 microinch / 0.1-2 microns) 50/Roll Testex Press-O-Film Replica Tape, Medium Grade (5-75 microinch / 0.1-2 microns) 50/Roll
Testex Press-O-Film Replica Tape
Medium Grade
Testex Press-O-Film Replica Tape
Coarse Minus Grade
Testex Press-O-Film Replica Tape
Coarse Grade
Testex Press-O-Film Replica Tape
X-Coarse Grade
Testex Press-O-Film Replica Tape
X-Coarse Plus Grade
Range When Used With Gauge (mils) / (microns)
not applicable0.5 to 1.0 / 12 to 25 0.8 to 2.5 / 20 to 641.5 to 4.5 / 38 to 1154.6 to 5.0 / 116 to 127


line
Related Products
line

Testex Micrometer Dial Thickness Gauge
  • To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces.
Testex Micrometer Dial Thickness Gauge

line

DeFelsko PosiTector RTR H
Replica Tape Reader

  • Surface Profile Gage for Blasted Steel and Textured Coatings
  • Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape
related

line

DeFelsko Positector RTR 3D
Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters

  • Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape
  • Download 3D .SDF image files for analysis in included software for Windows and Mac
DeFelsko Positector RTR 3D Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters


line
Downloads
line

Testex X-Coarse Grade Press-O-Film Replica Tape - Brochure
Replica Tape Article - A Source of New Surface Profile Information
Testex Press-O-Film Replica Tape - Online Instructions Manual

ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
ModelsPrice
$36.00
$175.00
$340.00
Recommended AccessoriesPRICE
$213.00
$213.00
$213.00
$280.00
$280.00
$5.99
$10.00