Solid state proximity switch especially designed for gear sensing
8 kHz frequency
Square wave output
The Shimpo SE-G2 Proximity Sensor (formerly SE-G) is a solid state proximity switch designed for gear sensing. The SE-G2 gear sensor will provide a square wave signal output and indicate detection via LED indicator on rear of unit. Maximum switching frequency is 8 kHz with a maximum sensing distance of 1.0 mm, gear pitch must be between 25.4 (min) and 16.93 (max).
Features
- Square wave output
- 8 kHz frequency
- 18" (0.46 m) cable included
- 0.04" (1 mm) sensing distance
- LED indication
Specifications
| Power (VCC) | + 8.5v – 16 VDC |
| Sink Current | 40 mA maximum |
| Output Signal High Level | (VCC – 1.1) ± 10% |
| Output Signal Low Level | 0.4v or less |
| Output Power | 50 mA |
| Duty Cycle | 25 – 75% |
| Output Impedance | 2.2 kΩ |
| Operating Temperature | -4 - 158 °F (-20 - 70 °C) |
Downloads
