The NKE AM-200 GPS Aquameter is the original handheld water quality meter with built-in GPS. The built-in GPS receiver allows the meter to record the location of every dataset, meaning you will always know where your data was captured. The meter is designed to be picked up and used by anyone intuitively. It requires no boot-up or warm-up time and allows you to record data with a single button press.
Even if you will be using your Aquaprobe with an AquaLogger or other device, you will still need a GPS Aquameter. The meter gives you real-time readings via the display, which are useful when deploying your logging system, as it allows you to check that the parameters are all reading ok.
- NKE GPS Aquameter Handheld Water Quality Meter
- Quick release lanyard
- Set of 5 AA Alkaline batteries
- USB Cable for downloading logged data to a PC
- Cross-head screwdriver for fitting the batteries and Probe maintenance
- Getting started card for quick reference
- Built in GPS receiver to enable location tagging with every data set, view data in Google Earth
- Display of all the parameters being measured; scroll left and right to view
- Record your data set at the touch of a single button, press M+ to record full data set including all parameters, GPS data and calibration data
- New low power auto data logging mode allows automatic data capture for up to 38 days
- Built in air pressure sensor for atmospheric compensation
- Ergonomic curved design sits nice in the hand, with rubber gasket for added grip in wet conditions
- Rugged, metal AquaConn connectors provide extreme durability where its needed most
- AquaLink PC application and USB cable provided with every GPS Aquameter for data management
| Dimensions (L x H x D): | 90mm x 180mm x 39mm
|
| Weight: | 425g
|
| Display: | 80 character backlit LCD
|
| Data Memory: | 10,000 full sets inc GLP data
|
| GPS Receiver: | 12 channel with int antenna
|
| GPS Accuracy: | ± 10m in all 3 dimensions
|
| Atmospheric Pressure: | 150mb – 1150mb, Accuracy ± 1mb
|
| Interface: | USB (cable provided)
|
| Power Supply: | 5 x AA cells. Alkaline or Ni-MH rechargeable
|
| Battery Life: | Alkaline > 20 hours Ni-MH > 40 hours
|
| Operating Temperature: | -20 C to +70 C
|
| Protection Class: | IP67 |
The NKE Aquaprobe AP-2000 Package with GPS Aquameter is provided with everything you need to test water. Offered as complete package, this kit provides advanced, portable water quality monitoring. Packages include an Aquaprobe, a GPS Aquameter, a 3 meter cable, accessories and some RapidCal calibration solution all housed in a neat carry case for easy storage and transport.
The NKE Aquaprobe AP-5000 Package with GPS Aquameter is our largest multiparameter portable water quality monitoring package. The AP-5000 allows you to add an increased number of sensors compared to the smaller AP-2000. Packages include an Aquaprobe, a GPS Aquameter, a 3 meter cable, accessories and some RapidCal calibration solution all housed in a neat carry case for easy storage and transport.
The NKE Aquaprobe AP-6000 Package with GPS Aquameter is provided with everything you need to test water. Offered as a complete package, this kit provides advanced, portable water quality monitoring. The packages include an Aquaprobe AP-6000 probe, a GPS Aquameter, a 3-meter cable, accessories, and some RapidCal calibration solution, all housed in a neat carry case for easy storage and transport.
The NKE Aquaprobe AP-7000 Package with GPS meter is provided with everything you need to test water. Offered as a complete package, this kit provides advanced, portable water quality monitoring. The packages include an Aquaprobe AP-7000 probe, a GPS meter, a 3-meter cable, accessories, and some RapidCal calibration solution, all housed in a neat carry case for easy storage and transport.
