Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

See More Torque Testers

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

See More Torque Testers
Price:
$2,148.00 - $3,198.00
    warrenty

    Product Description
    Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
    3 ranges up to 130 lb-in
    Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)
    USB Data Output

    The Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches measure the peak torque of non-impact electric/air drivers. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.

    Unique Smart Adapters
    The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with SW-1SV-USB software.

    The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.

    What’s Included
    All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.

    Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).


    line
    Kit Contents
    line

    • Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches
    • 2 smart adapters
    • AC adapter
    • NIST-Traceable Calibration certificate
    • Instruction manual
    • Foam fitted aluminum carrying case


    line
    Features
    line

    • Capacities up to 174 lb-in / 20 Nm
    • Selectable units lbf-in, Kgf-cm, N-cm and N-m
    • Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
    • 2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-11 come with spring adapters
    • Peak, Real Time and Peak Down measuring modes (selectable)
    • Measure both clockwise and counterclockwise
    • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
    • Statistics: number of data, Max, Min, Avg
    • Heavy-duty metal construction
    • Runs on internal NiCad batteries or AC adapter
    • 3/8 drive for socket wrenches


    line
    Force Ranges
    line

    ModelCapacityResolution
    i-87 lb-in
    8 kg-cm
    78.6 N-cm
    0.001 lb-in
    0.001 kg-cm
    0.01 N-cm
    i-8070 lb-in
    80 kg-cm
    7.86 Nm
    0.01 lb-in
    0.01 Kg-cm
    0.001 Nm
    CD-150M130 lb-in
    150 kg-cm
    15 Nm
    0.1 lb-in
    0.1 Kg-cm
    0.01 Nm
    DI-11174 lb-in
    200 kg-cm
    20 Nm
    0.1 lb-in
    0.1 Kg-cm
    0.01 Nm

    Accuracy: ±0.5% F.S., ±1 LSD


    line
    Adapters
    line

    Specifications – Standard Driver Adapters (2 included)

    i-8i-80
    AdapterSmart Adapters
    ModelOW-025EOW-10EOW-20EOW-60E
    Range2 lb-in9 lb-in18 lb-in53 lb-in
    Mechanical life10,000 hrs.8,000 hrs.5,000 hrs.
    Screw on top6-326-328-321/4-20
    Plug to socket3/8" square x 5/32" (20 mm square x 4 mm)

    CD-150MDI-11
    AdapterSpring Adapters
    ModelSJ-50SJ-100SJ-50SJ-200
    Range8 ~ 50 lb-in50 ~ 130 lb-in8 ~ 50 lb-in50 ~ 175 lb-in
    Mechanical life2500 times
    Screw on top5/16-183/8-165/16-183/8-16
    Plug to socket3/8" square x 5/32" (20 mm square x 4 mm)

    Optional Metric Smart Driver Adapters

    Model numberOW-025OW-10OW-20OW-60
    Range25 N-cm100 N-cm200 N-cm600 N-cm
    Screw on topM2P0.4M3P0.5M4P0.7M6P1


    line
    Related Products
    line

    MTM
    Multi-Range Torque Tester

    • - Available with 2, 3 or 4 torque transducers
    • - LED Indicator Shows Active Transducer

    line

    TA-Series
    Torque Analyzer - Dial Torque Tester

    line

    TT-QC
    Torque Tool Tester - AWS-QC

    • Bidirectional accuracy of ± 1% of indicated reading


    line
    Downloads
    line

    Cedar Series I Digital Torque Testers - Dimensions

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,148.00
    $2,148.00
    $2,460.00
    $3,198.00
    Recommended Accessories PRICE
    $264.00
    $291.00
    $40.00
    $315.00
    $315.00
    $315.00
    $315.00
    $234.00
    $321.00