Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester

See More Torque Testers

Imada Cedar NTS-6 Motorized Rotating Friction Torque Tester

See More Torque Testers
Price:
$4,934.00 - $7,079.00
    warrenty
    View All 9 Models in this Product Family

    Similar Products
    TWT-400 TWT-410 Torque Wrench Loader TWT-400
    RDA Mountz RDA Run Down Adapters for Torque Testers RDA
    TCM Mountz TCM Analog Bottle Cap Torque Analyzer TCM
    TT-DA AWS TT-DA Torque Drive Adapters TT-DA
    DI-4B-25 Imada Cedar DI-4B-25 Digital Torque Tester for Air Tools and Impact Wrenches DI-4B-25
    TT-HYRD AWS TT-HYRD Torque Tester for Multipliers, Rotating and Geared Torque Wrenches TT-HYRD
    TSTM Mark-10 TSTM Motorized Torque Test Stand TSTM
    Series-TT03 Mark-10 Digital Torque Gauges Series TT03 Series-TT
    TORQ-T Mark-10 TORQ-T Digital Torque Tester TORQ-T
    MZ-TA Mountz MZ-TA Torque Wheel and Torque Segment Arm MZ-TA

    Product Description
    aImada Cedar NTS-6 Motorized Rotating Friction Torque Tester
    9 Ranges up to 45.00 lb-in

    The Imada Cedar NTS-6 is a motorized rotating torque tester that measures rotating dynamic torque while turning the sample.

    Check the rotating torque, smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc.

    Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.


    line
    Features
    line

    • Peak, Real Time and Continuous Output measuring modes (selectable)
    • Programmable high/low setpoints for Go/No go testing
    • RS-232C output in Both CW and CCW operation

    The available engineering units of measurement on the NTS-6 Rotating Torque Testers are oz-in, lb-in, N-m, N-cm and Kgf-cm.


    line
    Specifications
    line

    Accuracy±1% F.S., 1LSD
    Measuring Range
    (at the time of Track)    		S1/oz: 3.0~100mNm
    S2/oz: 3.0~200mNm
    S5/oz: 0.030~0.5Nm
    Max. Rotational
    Speed
    (no-load)    		S1/oz: 85 rpm
    S2/oz: 30 rpm
    S5/oz: 13 rpm
    S10: 18 rpm
    S20: 18 rpm
    S50: 5 rpm
    Display4 digit LCD display
    OperationBoth CW and CCW motorized rotation
    Measuring modesPP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
    GO: Real Time Mode displays TRANSIENT torque values.
    RG: Output Torque Data every 1/100 seconds.
    Measurement start timeCan be set up to 1 second in 0.1 second increments.
    Measuring timeTime can be programmed between 1 and 20 seconds.
    Go/No go testingProgrammable High and Low values; Green lamp (OK solid, NG blinking).
    External input/outputSignal output (open collector): Go and No Go
    Data output: RS-232C (9600 baud) External start switch input
    Data memory400 data
    Power supplyAC100V~240V
    Bit size4mm diameter


    line
    Force Ranges
    line

    ModelCapacity
    NTS-6-S10.030 - 0.900 lb-in
    NTS-6-S20.030 - 1.740 lb-in
    NTS-6-S50.30 - 4.50 lb-in
    NTS-6-S100.30 - 9.00 lb-in
    NTS-S200.30 - 17.40 lb-in
    NTS-S500.30 - 45.00 lb-in
    NTS-S1oz0.30 - 14.00 oz-in
    NTS-S2oz0.30 - 28.00 oz-in
    NTS-S5oz3.00 - 70.00 oz-in
    View Cart
    Links
    Contact US
    ABQ Industrial
    21 Waterway Avenue
    Suite 300
    The Woodlands, TX 77380
    U.S.A.
    Tel: 1-888-275-5772
    Tel: 1-281-516-9292
    Fax: 1-866-234-0451
    E-Mail: info@abqindustrial.net
    Logo Authorize.net
    We Accept
    we accept
    Copyright © 2024 Abq Industrial
    Free Shipping over $150
    Custumer Rating