Mark-10 ESMH-DC Advanced Motorized Test Stand

See More Test Stands, Motorized

Mark-10 ESMH-DC Advanced Motorized Test Stand

See More Test Stands, Motorized
This product has been discontinued

Product Description
This product has been replaced by the ESM303H
Advanced Motorized Horizontal Test Stand
50lb Capacity
Manufacturer: Mark-10
Warranty: One Year

The ESMH-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the ESM motorized test stand, including 50 lb (250 N) force capacity, smooth top surface for coefficient of friction testing, integrated limit switches, stepper motor design that prevents speed variation with load, and more.

The ESMH-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features.

line
Features
line

  • Computer Control
  • An RS-232 port is provided to interface with a PC. The ESMH-DC accepts a number of commands pertaining to test stand motion and force gauge functions*. The following additional items are required for PC control:
  • Overload Protection
  • Protects a force gauge against overload (requires a Series BG force gauge and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virtually any force gauge with analog output.
  • Auto-return
  • The crosshead moves to a limit switch or force set point (requires a Series BG force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point.
  • Cycling / Dwell Time
  • The crosshead moves up and down between limit switches or force set points (requires a Series BG force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.
  • Programmable LEFT / RIGHT Button Functions
  • LEFT and RIGHT button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed, Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion.
  • Independent Left and Right Speeds
  • Programmable independent speeds for left and right directions
  • Selectable speed units of measurement (in/min & mm/min)
  • Password protection Prevents unauthorized changes to test parameters

Contains no integrated travel measurement. Travel information available only through the external ESMH001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301.

line
Specifications
line

Capacity 50 lbs / 25 Kg / 250 N
Stroke 13" [330 mm], 12" [305 mm] w/optional travel display
Travel Rate 0.2 - 50 in/min [5 - 1270 mm/min]
Speed Accuracy ±2% of setting, ±0% variation with load
Limit Switch Repeatability ±0.001" [0.03 mm]
Dimensions Refer to Dimensions above
Compatible Gauges BG and MG
Warranty 3 years


line
Dimensions
line

dimensions

line
Related Products
line

BG
Digital Force Gauge

  • RS-232, Mitutoyo and analog outputs
  • Selectable units of measurement
related

line

MG
Economical Digital Force Gauge - Push Pull Gauge

  • User-selected units of Pounds, Kilograms or Newtons
  • 3 Year Warranty
related

line
Downloads
line

ESMH-DC Advanced Motorized Test Stand - Data Sheet

line

line