Dillon FI-521 LED Load Cell Indicator

See More Force Sensors

Dillon FI-521 LED Load Cell Indicator

See More Force Sensors
Price:
$1,085.00
    warrenty

    Product Description
    The Dillon FI-521 LED Load Cell Indicator is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second

    The Dillon FI-521 LED Load Cell Indicator is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second. The FI-521 Indicator features an IP65 stainless steel enclosure for reliable performance in wet or dusty environments. Included swivel mounting bracket allows for wall or bench mounting. Watertight connections include the AC power cable, 7-pin load cell quick disconnect cable connector and three additional cable ports. The instrument's 6 key front panel enables all setup, configuration and calibration procedures. FI-521's calibration procedures include a multi-point calibration feature for correcting the performance of non-linear load cells. The indicator has memory to store calibration information for up to three load cells. 

    The Dillon FI-521 can store peak and first peak values at 80 Hz. Operators can track stored data using date/time information and a 6-digit ID number. The stored data can then be printed or sent to aPC or other device using programmable print and data output formats. The FI-521's four logic level inputs and the bi-directional serial port can receive control commands from external devices. The instrument can control external devices via any of the two standard cutoff outputs. Also, has on board an analog output that is fully calibrated for 0 to 2.5 VDC.


    line
    Features
    line

    • 3 Cell Memory
    • 80 Hz Peak Capture Rate
    • IP65
    • 2 RS-232 serial ports
    • RS-485
    • 5 point curve linearization
    • Built-in real time and date clock
    • 3 Units of measure (pound-force, kilogram-force, Newtons)
    • 2 set point outputs
    • 7-pin load cell quick disconnect (equipped)
    • 4 remote keypad inputs
    • Analog output


    line
    Specifications
    line

    Display 7 digits, 7-segment, 0.7" (17 mm) ultra-bright LEDs with 14 annunciators
    Max display range -999,999 to 999,999
    Display update rate 10Hz
    Keypad 6 push buttons: select, cell, print, unit, zero, on/off
    Real Clock Built-in nonvolatile real time and date
    Serial Ports 2 ports, Full-duplex RS-232 and Full-duplex RS-232 or half-duplex RS485
    Baud Rate Selectable 1200-2400-4800-9600-19200/38400-57600 bps
    Data Output Format 8N1, 7O1, 7E1
    Serial Output Select up to 14 additional data parameters
    R5-485 0-5VDC
    Analog Output 0 to 2.5VDC (≤ 2.5mA)
    Remote Input Select, cell, print, unit, zero, off
    Setpoint 1 & 2 5 to 24VDC (.5A max) external, 5 to 8VDC (≤ .1A) internal


    line
    Downloads
    line

    Dillon FI-521 LED Load Cell Indicator - Instruction Manual
    Dillon FI-521 LED Load Cell Indicator - Data Sheet

    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $1,085.00
    $1,085.00
    $1,085.00
    Recommended Accessories PRICE
    $95.00
    $105.00
    $125.00
    $135.00
    $30.00
    $30.00
    $115.00