DeFelsko SPG1-E PosiTector SPG 1 Standard Surface Profile Gage for Blasted Steel

Description
Price: $ 645.00
DeFelsko SPG1-E PosiTector SPG 1 Standard Surface Profile Gage with PRBSPG-B Integral Probe for Blasted Steel Range: 0 to 500 um (0-20 mils)
Measures and records peak to valley surface profile heights
Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others

Digital depth micrometer measures and records peak to valley surface profile heights

  • Solvent, acid, oil, water, and dust resistant – weatherproof
  • Alumina wear face and tungsten carbide tip for long life and continuous accuracy – field replaceable
  • PosiTector interchangeable platform – attach any PosiTector probe to a single gage body
  • Fast measurement rate of over 50 readings per minute – ideal for quickly and accurately measuring large surfaces
  • USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software
  • Certificate of Calibration showing traceability to PTB included (Long Form)

Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others


line
Photo Gallery
line


line
Features
line

Simple

  • Fast measurement rate of over 50 readings per minute – ideal for quickly and accurately measuring large surfaces
  • Enhanced one-handed menu navigation
  • RESET feature instantly restores factory settings

Durable

  • Alumina wear face and tungsten carbide tip for long life and continuous accuracy – field replaceable tips
  • Solvent, acid, oil, water and dust resistant - weatherproof
  • Rugged, indoor/outdoor instrument - ideal for field or shop use
  • Shock-absorbing, protective rubber holster with belt clip
  • Two year warranty on gage body AND probe

Accurate

  • Certificate of Calibration showing traceability to PTB included (Long Form)
  • Built-in temperature compensation ensures measurement accuracy
  • Glass Zero Plate and metal check shim included
  • Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17

Versatile

  • 30º angle interchangeable probe tip available for special surface profile applications
  • Cabled probes available for blasted steel, textured coatings and concrete profile
  • Selectable display languages
  • High contrast LCD with backlit display
  • Flip display enables right-side-up viewing
  • Uses alkaline or rechargeable batteries (built-in charger)
  • Mils/Microns switchable

Powerful

  • Statistics mode continually displays/updates average, standard deviation, min/max depth and number of readings while measuring
  • HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
  • FAST mode – faster measurement speed for quick inspection
  • Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included
  • Software Updates via web keep your gage current
  • Screen Capture – record and save image into USB flash memory for record keeping and review
  • Software Solutions for viewing, analyzing & reporting data
  • Every stored measurement is date and time stamped

See probe compatibility:


line
Models
line

Standard Models

Includes ALL features as shown on left plus

  • Storage of 250 readings per probe—stored readings can be viewed or downloaded
SPG 1SPG S1SPG CS1SPG TS1
Application
Blasted SteelBlasted SteelTextured CoatingsConcrete Surface Profile
Measuring Range
0 – 500 μm    0 – 20 mils0 – 500 μm    0 – 20 mils0 – 1500 μm    0 – 60 mils0 – 6 mm     0 – 250 mils
Accuraccy
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (25 μm + 1%)
± (1 mil + 1%)
Tip
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)


Advanced Models

Includes ALL features as shown on left plus

Storage of 100,000 readings in up to 1,000 batches

  • Storage of 100,000 readings in up to 1,000 batches and sub-batches
  • SmartBatch™ allows entry of user-defined parameters and criteria to comply with various standards and test methods
  • Live graphing of measurement data
  • Onscreen Batch Annotation—add notes, change batch names and more with built-in QWERTY keyboard
  • WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates
  • Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software.
  • Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols
SPG 3SPG S3SPG CS3SPG TS3
Application
Blasted SteelBlasted SteelTextured CoatingsConcrete Surface Profile
Measuring Range
0 – 500 μm    0 – 20 mils0 – 500 μm    0 – 20 mils0 – 1500 μm    0 – 60 mils0 – 6 mm     0 – 250 mils
Accuraccy
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (25 μm + 1%)
± (1 mil + 1%)
Tip
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)

Probe Only

PosiTector gage bodies are compatible with the full range of PosiTector 6000, 200, DPM, IRT, SPG, RTR, SST, SHD, BHI and UTG probes.

PRBSPGPRBSPGSPRBSPGCSPRBSPGTS
Application
Blasted SteelBlasted SteelTextured CoatingsConcrete Surface Profile
Measuring Range
0 – 500 μm    0 – 20 mils0 – 500 μm    0 – 20 mils0 – 1500 μm    0 – 60 mils0 – 6 mm     0 – 250 mils
Accuraccy
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (5 μm + 5%)  
± (0.2 mil + 5%)
± (25 μm + 1%)
± (1 mil + 1%)
Tip
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree*
Radius: 50 μm (2 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)
Angle: 60 Degree
Radius: 500 μm (20 mils)

* 30 degree tips available for conformance to Australian standard AS3894.5-C


lineSoftware
line

PosiSoft Desktop

Powerful desktop software for downloading, viewing, printing and storing measurement data. No internet connection required.

  • Simple, intuitive user interface
  • Import readings directly from the gage via USB or from legacy PosiSoft desktop versions
  • Synchronize measurement data including readings, notes and pictures to and from PosiSoft.net

Click to enlarge image

PosiSoft Custom

Easily create reports from your measurement data in seconds

Generate custom, professional PDF reports

Include inspection information such as on-site pictures, screen captures, notes and more to communicate important details

Create and save multiple custom layouts as templates – insert cover pages, add logos/images, and select font and point size

Select the information to include for each product type – charts, histograms, readings, time stamps and more

Compile multi-batch reports from one or more probes and instrument types


Click to enlarge image


lineVideoline


lineComplete Kitline

All gages come complete with body and probe, couplant, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, instructions, nylon carrying case with shoulder strap, protective lens shield, Long Form Certificate of Calibration traceable to NIST, USB cable, PosiSoft Software, two (2) year warranty.


lineDownloadsline

DeFelsko SPG1-E PosiTector SPG 1 Surface Profile Gauge for Blasted Steel, Built-in Probe, Range: 0 to 500 um (0-20 mils), Standard Kit - Operating Manual

DeFelsko SPG1-E PosiTector SPG 1 Surface Profile Gauge for Blasted Steel, Built-in Probe, Range: 0 to 500 um (0-20 mils), Standard Kit - Data Sheet
DeFelsko SPG1-E PosiTector SPG 1 Surface Profile Gauge for Blasted Steel, Built-in Probe, Range: 0 to 500 um (0-20 mils), Standard Kit - Quick Start Guide
DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos


lineF.A.Q. (Frequently Asked Questions)line

Is the spring pressure for the PosiTector SPG TS lower than the SPG CS?

The spring pressure is slightly greater than the SPG TS to allow adequate seating of the tip in the profile. Keep in mind that no standards exist for such a method, so we designed the pressure based on our internal tests.

Is the PosiTector SPG TS traceable to PTB or NIST?

All PosiTector SPG probes including the SPG TS are traceable to PTB

Do your instruments require any formal training for use? Do you offer ‘demo’ models?

No. Our instruments are designed for simple operation, feature easy-to-use menus, both full and quick instruction manuals, and helpful videos. In lieu of demonstration models, we provide unlimited technical support via telephone and/or email, and a limited 30-day money back guarantee

Is the PosiTector SPG calibrated at the factory?

The PosiTector SHD arrives fully calibrated and ready to measure. A Long-Form Certificate of Calibration traceable to NIST or PTB is included, which documents actual readings taken by your instrument at our calibration laboratory on standards traceable to a national metrology institute. Beware of ‘Certificates’ or ‘Certificates of Conformance’ offered by competitors. These typically do not include actual instrument readings, and are often insufficient to meet common quality requirements.

Gage accuracy and correct operation can be verified using the included metal shim and glass zero plate.

Can I measure curved surfaces with the PosiTector SPG?

To measure accurately, the PosiTector SPG’s probe foot must contact the surface over its entire area. On tightly curved surfaces, the edges of the probe do not sit on the surface, skewing the readings.

Our PosiTector SPG instruments conform to Method B as described by ASTM D 4417 "Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel". The entirety of ASTM D 4417 specifically references flat, blasted steel surfaces. As such, any depth micrometer instrument used to measure the surface profile of a curved, blasted steel surface does not conform to ASTM D 4417.

Replica tape is ideal for recording the blast profile of curved surfaces, and DeFelsko recommends the PosiTector RTR Replica Tape Reader instrument as a reliable measurement alternative.

Can the PosiTector SPG be used on non-metallic substrates?

Yes! While primarily used to measure blasted steel, the PosiTector SPG can be used for many applications. The PosiTector SPG TS and PosiTector SPG CS also feature an extended range and larger radius probe tip to suit a wide range of applications:

  1. The PosiTector SPG CS will quickly and accurately measure the surface profile of textured coatings.
  2. The PosiTector SPG TS will quickly and accurately measure the surface profile of concrete.
Why are there 30˚ and 60˚ tips for the PosiTector SPG?

The PosiTector SPG uses a durable tungsten carbide tip for long life and continuous accuracy. If required, SPG probe tips can be replaced by the gage operator

  • The 60° tip complies with most test standards including ASTM D 4417 B.
  • 30° tips are available for conformance to Australian standard AS 3994.5-C.
Can the PosiTector SPG be moved over the surface to provide a ‘scan’?

No. The PosiTector SPG is a depth-micrometer instrument which quickly and accurately measures and records peak-to-valley surface profile heights on a blasted steel surface.

Like other instruments of this type, the PosiTector SPG is not dragged across a blasted surface: the gage operator takes an individual reading in one location on a surface, lifts and places the gage on another location on the surface for another individual reading, and so on.

Does the PosiTector SPG measure pit depth?

No. Pit gages are a general category of instruments used to measure pits and other surface variations. The PosiTector SPG is specifically designed to measure and record peak-to-valley surface profile heights on a blasted steel surface

Should I purchase the PosiTector RTR or PosiTector SPG for my application?

Both instruments conform to ASTM D 4417 "Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel".

The PosiTector SPG conforms to Method B of ASTM D 4417. The PosiTector SPG measures quickly, and has no per-test cost. It keeps a digital record of each measurement, is less operator dependent, as no burnishing of replica tape is required. It also has a greater range than replica tape.

The PosiTector RTR conforms to Method C of ASTM D 4417. It is used together with Testex Replica tape, a widely used and respected method to measure surface profile. It has the ability to measure on curved surfaces, and gives the user the option to retain the replica tape; a physical replica of the tested surface.

How often should the PosiTector probe be recalibrated?

PosiTector probes include a Certificate of Calibration with no expiry or end date. They have no shelf life, therefore the length of time in the field is not a good indicator for recalibration intervals. Many organizations with quality programs and recertification programs require annual recalibrations, and this is a good starting point for most users. DeFelsko recommends that customers establish calibration intervals based upon their own experience and work environment. Based on our product knowledge, data and customer feedback, a one year calibration interval from the date the instrument was placed in service is a good starting point

lineBuy Nowline


Check the items you would like to purchase then click "Add To Cart"
ItemPrice
$645.00
AccessoriesPRICE
$365.00
$365.00
$495.00
$495.00
$495.00
$595.00
$55.00
$100.00
$100.00
$125.00
$15.00
$995.00