Dakota Ultrasonics PX-7DL Data Logging Precision Ultrasonic Wall Thickness Gauge

See More Ultrasonic Thickness Gauges

Dakota Ultrasonics PX-7DL Data Logging Precision Ultrasonic Wall Thickness Gauge

See More Ultrasonic Thickness Gauges
This product has been discontinued

Product Description



Dakota PX-7DL High Resolution Ultrasonic Thickness gauge with Data Logging


Range: 0.0060 - 1.000 inches - 0.15 - 25.4 mm


Resolution: .0001" (0.001 mm)


Datalogging: YES



Measuring Range in Steel
0.0060 - 1.000 inches
0.150 - 25.40 mm

The Dakota Ultrasonics PX-7DL Data Logging Precision Ultrasonic Wall Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

The PX-7DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics

line
Features
line

  • Resolution of 0.0001 inch (0.001 mm)
  • Windows compatible data transfer program supplied at no additional cost.
  • Selectable units of inch or mm
  • Large, backlit LCD display retains last reading
  • Memory for 1000 data points in up to 10 batches
  • CE Certified
  • RS-232C Serial output for downloading stored data to a printer or computer
  • Includes NIST-Traceable Calibration Certificate
  • TI-007DL-GT model available with Graphite Tip for measuring plastics

line
Delay Line Tips for PX-7
line

P/N Description Standard / Optional Image
X-231-0000 1/4" x 3/8"
for all metals
(Short)
Standard
X-241-0000 1/4" x 1/2"
for all metals
(Long)
Standard
X-633-0000 1/4" x 3/8"
Graphite Tip
for thin plastics
(Graphite Short)
Standard on "-GT" models
X-532-0000 3/16" x 3/8"
Conical Tip
for all metals
(Cone)
Optional
X-533-0000 3/16" x 3/8"
Graphite Tip
for thin plastics
(Graphite Cone)
Optional


lineSpecificationsline

Range in Steel 0.0060-1.0000" (0.15-25.40 mm)
Resolution .0001" (0.001 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.)
Transducer Single element with delay tip. 10 to 22 MHz frequency range.
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
Serial Output RS-232C (8, N, 1, user-set baud rate)
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C)
Battery Type Two AA batteries
Battery Life 150 hours
Weight 7 ounces (300g)
Size 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm)
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 Years
Probes: 90 Days


lineComplete Kitline

The PX-7DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

lineRelated Productsline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

lineline


F.A.Q.

Do Dakota Ultrasonics Thickness Gauges require any training for use?

No. Dakota Ultrasonics Thickness Gauges are designed for simple operation and feature easy-to-use instruction manuals. We also provide technical support via telephone and/or email, and a 30-day money back guarantee.

Are Dakota Ultrasonics Thickness Gauges calibrated at the factory?

Yes. Dakota Ultrasonics Thickness Gauges arrive fully calibrated and ready to measure.

Do Dakota Ultrasonics Thickness Gauges include Certificate of Calibration?

Yes. Dakota Ultrasonic Thickness Gauges includes NIST-Traceable Calibration Certificate, CE-Certified

Can I measure the thickness of non-metallic materials like plastic and rubber with Dakota Ultrasonics Thickness Gauges?

Yes. Dakota Ultrasonics Thickness Gauges features several preprogrammed sound velocities for common materials.

Can Dakota Ultrasonics Thickness Gauges measure cast/ductile iron or cast aluminum?

Yes. Dakota Ultrasonics Thickness Gauges instruments are designed to accurately measure the wall thickness of carbon steel, aluminum, stainless steel and plastic.