Dakota Ultrasonics PR-8V Sonic Tester / Audio Gauge Z-158-0003

See More Sonic Testers

Dakota Ultrasonics PR-8V Sonic Tester / Audio Gauge Z-158-0003

See More Sonic Testers
Price:
$2,050.00
    warrenty

    Product Description
    Dakota Ultrasonics PR-8V Z-158-0003 Sonic Tester / Audio Gauge
    Thickness Gauge for engine builders and race shops
    Measures cylinder wall thickness, deck height, chassis tubing & more
    All the features of the PR-8V with a time based B-Scan that will graphically draw the blind of a cylinder wall to show corrosion
    Data Logger - Stores 12,000 readings and B-Scans.

    Range in Steel: 0.63 to 254 millimeters / 0.025 - 9.999 inches


    line
    Applications
    line

    • Cylinder's & Pitting
    • Head Ports & Pipe
    • Roll Cages
    • Body Panels
    • Chasis
    • Variety of Applications

    The Check-Line PR-8V thickness gauge is designed specifically for the needs of engine builders and race shops. The time-based B-Scan feature of the PR-8V displays a cross section of the opposite surface, allowing engine builders the ability to see the contour of the back surface in cylinders while scanning.

    Use the Multi-Mode (Echo-Echo mode) feature to measure chassis tubing with or without paint and coatings. Built-in automatic gain control.

    Selectable low, medium, and high gain settings offer the inspector the additional punch power for materials that are hard to penetrate.

    The variety of calibration options is just one more example of the PR-8V's versatility.

    Store up to 64 custom setups. Factory setups available for common applications.

    The internal Data Logger of the PR-8V has been customized for both the engine builder and the chassis inspector. Selectable cylinder mapping or general alpha numeric file storage will satisfy your reporting needs.

    Built-in transducer types offer increased linearity between transducers.

    The Fast Scan feature provides a better representation during the scanning process, by making 32 measurements per second. Remove the transducer from the test material to display the thinnest measurement found.

    Use the visual and audible alarm to set Hi and Lo limits to signal the inspector when the measurements are out of tolerance.

    The PR-8V also comes complete with our Windows PC software for transferring data to and from a PC, and viewing B-Scans, Cylinder Maps, and general measurements.


    line
    Features
    line

    • Selectable low, medium, and high gain settings offer the inspector the additional punch power for materials that are hard to penetrate.
    • Store up to 64 custom setups. Factory setups available for common applications.
    • Selectable transducer types with built-in dual path error correction for improved linearity.
    • Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
    • Use the visual and audible alarm to set Hi and Lo limits to signal the inspector when the measurements are out of tolerance.
    • 2 year warranty


    line
    Specifications
    line

    Range in Steel* Pulse-Echo Mode: Standard operating mode for engines and automotive parts without painted surfaces (pits or flaws detection) measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

    Echo-Echo Mode: Thru Paint & coatings - chassis and general body inspections measures from 2.54 to 102 mm (0.1 - 4.0 inches).
    Range will vary +/- depending on the thickness of the coating.

    *Range varies by transducer, multiple transducers are required to cover entire range
    Resolution .001 inches (0.01mm)
    Velocity Range .0492 to .3936 in./ms
    1250 to 9999 meters/sec
    Units English & Metric
    Measurement Modes - Pulse-Echo (flaws, pits)
    - Echo-Echo (thru-paint)
    Transducer Types Dual Element (1 to 10 MHz).
    Memory 16 megabit non-volatile ram
    Memory capacity 12,000 pages with 1 reading and waveform per page
    Power Source Three 1.5V alkaline or 1.2V NiCad AA cells
    Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad
    Auto Power off: if idle 5 min
    Display 1/8 in. VGA grayscale display 62 x 45.7mm
    Keyboard Membrane switch with twelve tactile keys
    Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
    Operating Temperature -14° to 140°F (-10° to 60°C)
    Weigth, net 13.5 ounces
    Dimensions 63.5 W x 165 H x 31.5 D mm
    Warranty 2 year limited
    Certification CE Approved, Factory calibration traceable to national standards


    line
    High Speed Scan Mode & B-Scan Mode
    line

    Hi-Speed Scan Mode B-Scan Mode
    Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off. TheB-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left.


    line
    Transducer and Probe Information
    line

    For Engine Blocks (Cylinders & Decks)
    One probe is usually good for use on both Cast Aluminum and Cast Iron Engine Blocks. The 2 inch radius allows the probe to measure the concave surface inside cylinders. The radius is gentle enough that the same probe can also be used to measure on the flat surfaces "decks" on the block. This one probe will work for over 90% of Cast Aluminum or Cast Iron Blocks.

    T-104-2120
    > 0.500"/5MHz with 2 inch radius

    ++ In instances where the above probe does not work, or if the block is made from a very old Aluminum Cast Aluminum, then the alternate probe would be T-10404120 (0.500"/10MHz), also with a 2 inch radius.

    For Heads (Ports)
    Probe selection depends upon type of material; cast iron or cast aluminum. This probe has a 0.55" radius and is supplied with either a 1 inch wand or 9 inch wand, depending upon user preference.

    Cast Iron
    > 0.250"/5MHz with 0.55" Radius
    with 1 inch wand T-162-2110
    with 9 inch wand T-132-2110

    Cast Aluminum
    > 0.250/10MHz with 0.55" Radius
    with 1 inch wand T-162-4110
    with 9 inch wand T-132-4110

    For Chassis Tubing
    This would be used by chassis builders as well as sanctioning bodies (i.e. NHRA, ARCA, etc.). One probe is normally suitable for any application, assuming they do not want "thru-paint" capability.

    T-101-4000
    > 3/16"-10MHz flat bottom (no radius)

    For "thru-paint" capability, when measuring chassis tubing for use with the PR8V

    T-102-2700
    >0.250/5MHz Hi-Damp for use in MMX Mode


    ADD TO CART THE ITEMS YOU WOULD LIKE TO PURCHASE
    Models Price
    $2,050.00
    Recommended Accessories PRICE
    $325.00
    $295.00
    $335.00
    $305.00
    $330.00
    $295.00
    $305.00
    $325.00
    $325.00
    $325.00