Measuring Range 0-40.0 mils (0-999 µm) DCF-900 Coating Thickness Gauges measures the thickness of paint, plating, coatings and galvanizing on iron or steel...more accurately, dependably and economically! DCN-900 Coating Thickness Gauges measures the thickness of paint coatings, anodize on aluminum, brass, zinc, stainless steel and other non-ferrous metals. 
Features
- Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.
- Keypad-selectable English or metric units
- Continuous reading update detects soft coatings as probe tip "sinks" into them
- The DCF-900 and DCN-900 Coating Thickness Gauges include the gauge and probe, a bare test plate, two precision calibration shims & instructions, all in a foam-fitted carrying case
- Calibration to NIST standards is available upon request
- Remote probe permits easy access for difficult, hard-to-reach places
- Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job
- Very reliable operation... Consistent, repeatable measurements
- Excellent results with thin substrates... As thin as 0.005" (10 µm)
Photo Gallery
Complete Kit
The 900 Series Gauges are supplied as a complete kit including gauge, ferrous or non-ferrous zero plate, 2 plastic test shims and instruction manual in a foam fitted, hard plastic carrying case.
Specifications
| Range | 0.1-40.0 mils (0-999 µm) | | Resolution | 0.1 mil (1 µm) | | Accuracy | 0-10 mils: ±0.1 mil
10-40 mils: ±1% of reading | | Probe | DCF-900: Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable
DCN-900: Eddy current, 0.4" (10mm) dia., spring-loaded, with v-notched shell and 28" (70cm) cable | | Battery/Life | 9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use. | | Dimension | 5.7" x 3.1" x 1.5"
(145 x 79 x 38 mm) | | Weight | 9 oz. (250 g) | | Temperature Limits | Material: 15 to 140° F (-10 to 60° C)
Ambient: 32 to 125° F (0 to 50° C) | | Warranty | One (1) year |
Related Products
Measuring Limits
| Minimum Radius for Convex Surfaces | 0.375" (9.5 mm) | | Minimum Radius for Concave Surfaces | 2.5" (63.5 mm) | | Minimum Headroom | 2.5" (63.5mm) | | Minimum Sample Diameter | 0.5" (13 mm) | | Minimum Substrate Thickness - F | 0.020" | | Minimum Substrate Thickness - NFe | NA |
Downloads
|
