136-3-SCF Thin Wire Tension Sensor

See More Tension Sensors, Online

136-3-SCF Thin Wire Tension Sensor

See More Tension Sensors, Online
Call for price
    warrenty

    Product Description
    For use in Closed Force System Applications ONLY
    Tension Ranges up to 100Kg / 220Lbs
    Built-in Diameter Compensation from 0.1 - 5.5 mm (0.004" - 0.217")

    4 ranges available - Ranges up to 3 kN (675 lbs) 
    Material Diameters - 0.1 - 5.5 mm (0.004" - 0.217") 

    The 136-3-SCF-DC is especially-designed for use in Closed Force System (CFS) applications, where both ends of the material are fixed. This sensor is designed so the cable will pass under the 1st roller and over the center and last roller. This design applies a minimal break angle of the material over the center sensing roller minimizing the error caused by the presence of the tension sensor

    With traditional 3-Roller systems where the material travels under/over the rollers in the illustration above, a significant error is generated by the presence of the tension sensor increasing the tension dramatically --- as soon as the sensor is installed. The unique design concept of 136-3-SCF-DC eliminates this problem and provides the only accurate means of measuring tension in these types of applications.

    The accuracy of this sensor is further enhanced by its built-in diameter compensator adjustment. The operator simply adjusts the diameter compensator to equal the diameter of the process material being measured and the calibration is automatically adjusted for highest accuracy. The typical measuring error is less than 1%.


    line
    Kit Contents
    line

    • 136-3-SCF-DC Thin Wire Tension Sensor
    • Yarns & Filaments
    • Brake Cables
    • Aircraft Cables
    • Architectures Cables
    • Wires / Cables up to 5mm diameter


    line
    Features
    line

    • Built-in Diameter Compensator for material diameters 0.1 - 5.5 mm (0.004" - 0.217")
    • Minimal sensor influence on the tension by utilizing the smallest deflection angle possible
    • High accuracy and reproducibility
    • Small angle of material bending, therefore
      • No damage of the material
      • Very low additional tension during measurement
    • 190 mm clearence required along the length of the process material to place tension meter

    Applications:

    Tension Measurement:
    • Thin stay ropes and cables
    • Thin static wires
    • Thin pre-loaded wire ropes, steel wire ropes
    • Aircraft support cables
    • Overhead cables
    Range of application:
    • String tension of musical instruments
    • Wire EDM machines
    • Airplane manufacturing


    line
    Downloads
    line

    136-3-SCF-DC Thin Wire Tension Sensor- Dimensions