Product 16/29

Previous
Return to the Product List
Next

TI-25LT Ultrasonic Thickness Gauge

Price: $845.00
Economical gauge for measuring CARBON STEEL ONLY
Range:
0.040 - 6.00 inches
1.00 - 150.00 mm
Resolution: 0.004" (0.01mm)
Datalogging: NO
TI-25LT Low Cost, Ultrasonic Thickness Gauge

Measuring Range in Steel
0.040 - 6.00 inches
1.00 - 150.0 mm

The TI-25LT Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion - from only one side!

Standard configuration: In its standard configuration, the TI-25LT Wall Thickness Gauge is factory set to MEASURE STEEL ONLY

Optional configuration: As a “no cost” option, the TI-25LT Wall Thickness Gauge can be factory set to measure on stainless steel.

Easy upgrade to full TI-25M Ultrasonic Thickness Gauge functionality (refer to separate data sheet). TI-25M Ultrasonic Thickness Gauges measure on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area. The minimum reading recorded during the "scan" is displayed.

Upgrade to TI-25M Ultrasonic Thickness Gauges require factory installation of enhanced circuit board, new firmware and keypad.


line
reddot Features of the TI-25LT Ultrasonic Thickness Gauge
line
bluedot Resolution of 0.004 inch (0.01 mm)
bluedot Large, backlit LCD display retains last reading
bluedot Simple operator controls virtually eliminate training
bluedot Special-purpose probes are offered for a variety of applications
bluedot The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
bluedot Switch-selected units for inches or mm
bluedot For underwater surveying, probe cable lengths up to 50 feet are optionally
bluedot The TI-25LT Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water
bluedot CE Certified
bluedot Includes NIST Calibration Certificate

line
reddot Photo Gallery for the TI-25LT Ultrasonic Thickness Gauge
Click any photo to enlarge
line

Wall Thickness Gauge TI-25LT Wall Thickness Gauge

line
reddot Typical Applications of a TI-25LT Ultrasonic Thickness Gauge
line typical

line
reddot Optional Accessories for the TI-25LT Ultrasonic Thickness Gauge
line



NIST-Traceable Steel Test Block
3 Sizes Available		NIST-Traceable Steel Test Block

bluedot Precision Machined and Finished

bluedot Includes NIST Report and Test Data



___________________________________________



Uncertified Steel Test Block
For Ultrasonic Gauges		Uncertified Steel Test Block

bluedot For convenient confirmation of thickness gauge calibration



___________________________________________



TICC-M
Protective Holder for Ultrasonic Gauges		TICC-M

bluedot Constructed from heavy duty Cordura Nylon

bluedot Built-in belt loop



___________________________________________



CF12
Coupling Fluid		CF12

bluedot Used to create an ultrasonic coupling between the probe and material to be measured

bluedot 12oz Bottle



___________________________________________



V-Block
Transducer Holder		V-Block

bluedot The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.




line
reddot Complete Kit of the TI-25LT Ultrasonic Thickness Gauge
line


Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case.
complete kit

line
reddot Measuring Limits of the TI-25LT Ultrasonic Thickness Gauge
line

Minimum Radius for Convex Surfaces0.350" (8.89 mm)
Minimum Radius for Concave Surfaces3" (76.2 mm)
Minimum Headroom1" (25.0 mm)
Minimum Sample Diameter0.150" (3.8 mm)
Minimum Substrate Thickness - Fna
Minimum Substrate Thickness - NFena

line
reddot Specifications of the TI-25LT Ultrasonic Thickness Gauge
line
Range in Steel0.040-6.00" (1.00-150.0 mm)
Resolution.004" (0.01mm)
Display4˝ - Digit, 0.5" Backlit LCD
Velocity Range.0787-.3937 in/µs
(2000-10,000 m/sec)
Probe1/4", 5 MHz, actual wearface is 5/8" (17mm)
Probe WearfacePEEK (Polyethylethylkytone)
Cable4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op
Temp. LimitsAmbient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Battery TypeTwo AA batteries
Battery Life200 hours
Weight710 ounces (280g)
Dimensions2.5 x 4..5 x 1.25"
(64 x 114 x 32mm)
AccessoriesProbe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
WarrantyGauge: 5 Years
Probes: 90 Days

line
reddot Downloads for the TI-25LT Ultrasonic Thickness Gauge
line

newsNIST Certificate Sample Click here to download

newsPDF Data Sheet Click here to download

manualPDF Instruction Manual Click Here To Download

line
reddot Buy Now
line


Please select the items you would like to purchase then click "Add to Cart"
Products:

TI-25LT Low Cost, Ultrasonic Wall Thickness Gauge - Model




Accessories:
Accessories for Ultrasonic Wall Thickness Gauges:






  • Manufactured by: Checkline
Copyright © 2012 Albuquerque Industrial. Developed by Marctin Technology