Product 5/6

Previous
Return to the Product List
Next

QB-10000 Elevator Cable Tension Meter

Price: $1,995.00
Elevator Cable Tension Meter
Elevator Inspections
– Quickly balance wire ropes
– Measure total weight of car

QB-10000 Elevator Cable Tension Meter


The new QB-10000 Tension Meter provides a quick and easy way to accurately measure and display all of the elevator traction cable tensions in a set while the tension on a single cable is being adjusted. This makes it extremely easy to balance the tensions of cables in a set of elevator cables or any other multiple-line array of tension cables, such as tower and stack guy wires, crane rigging sets and platform lifts, etc. The digital display also shows the average tension of the set as well as the total tensile load.

The QB-10000 installs easily, measures cable tension up to 10,000 lbs directly, stores readings and is removed from the cable in seconds. No lookup or reference to correction or conversion charts is required. Writing down measurements for comparison purposes is also not required.

Balancing the tensions on a set of cables takes minutes instead of hours and can be done by a single person, working alone, instead of two or three.

line
reddot Features
line
bluedot DIRECT READING -- no reference to conversion charts required
bluedot Minimum training time required. Significant labor and time savings over alternative methods
bluedot View tensions on all cables in the set, average tension and total tensile load on the back-lit display - instantly. Display also features full text prompts
bluedot Balance tensions in multiple lines in minutes
bluedot Accommodates wide range of cable types and sizes, from 3/16” to 1”
bluedot Factory-provided 5-line display for four (4) cables can be optionally expanded to as many as 16 cables by keypad entry and scrolling
bluedot One (1) set of sheaves for wire rope sizes from ¼” to ¾” is included. Other size sheaves are optionally available
bluedot Calibration for three (3) wire rope sizes is included. They are for steel, 1/2", 9/16” and 5/8”, all 8x19. Calibration for up to five (5) additional sizes or types is optionally available
bluedot Safety improvement gained by measurement method
bluedot Highly visible yellow finish with easy to use soft-key interface
bluedot Powered by two (2) standard, easily-replaced AA batteries to provide long life between changes
bluedot 2-Year Warranty
line
reddot Display
line

Display showing cable tension summary screen.
line
reddot Specifications
line
Capacity10,000 Lbs / 45 kN / 4,500 kg 
Accuracy± 3% of full scale, when using cable that is calibrated for same wire rope size and type
± 5% with same wire rope diameter as calibrated but different wire rope type 
Number of Calibrations3 factory installed wire rope sizes:
1/2" 8 x 19
9/16" 8 x 19
5/8" 8 x 19
Up to 5 additional wire rope type or size can be optionally provided 
Loading errorCable elongation of only 0.08" (2mm) 
DisplayDot graphic, backlit LCD supports full text and 1.0" high digits 
Sheave SetSupplied with one set of sheaves for 1/4" to 3/4" Wire Rope. Other sheave sets may be ordered as necessary 
Environmental protectionSuitable for continued outdoor use 
Operating Range-4°F to 140°F (-20°C to 60°C) 
Tension Units of MeasurePound-force, kilogram force or Newtons, user-selectable 
ResolutionConfigurable for low, medium or high 
line
reddot Complete Kit
line
The QB-10000 Quick Balance Tension Meter is supplied as a complete kit including 10,000 lb capacity meter, fitted with 1/4" to 3/4" Sheave Set and (3) pre-loaded calibrations:
1/2" 8x19
9/16" 8x19
5/8" 8x19

Shipped in foam-fitted, hard-plastic carrying case		complete kit
line
reddot Download
line
news PDF Data Sheet  Click here to download
line
reddot Buy Now
line

Please select the items you would like to purchase then click "Add to Cart"
Products:

QB-10000 Elevator Cable Tension Meter - Model




Accessories:
Accessories for Cable Tension Meters:






  • Manufactured by: Dillon
Copyright © 2012 Albuquerque Industrial. Developed by Marctin Technology