http://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2010 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Thu, 12 Aug 2010 15:11:32 -0500 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 http://www.abqindustrial.net/store/wdseries-dc-magnetizing-coils-p-582.html http://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=582 ]]> Price: $3,650.00 to $7,750.00 Portable DC Magnetizing Coils Available with Variable Output Variable Output 0-10,000 Amp-turns Fully Self Contained - No External Power Supply WD-Series Coils The WD-Series Coils are designed specifically for Magnetic Particle Inspection, and have grown in popularity from the Oil Country Tubular Goods Inspection Industry. Drill Pipe, Couplings and other Drilling Tools are regularly inspected for Transverse Cracks, which are normally found in the last engaged thread. These inspections are often performed in the Field, but are just as common in manufacturing and repair facilities. The WD-Series are available in 5 Models, with their Model Number designation in ID size ; • WDV-8 (8-5/8”/219mm ID) • WDV-10 (10-¾”/273mm ID) • WDV-14 (14”/356mm ID) • WDV-16 (16”/406mm ID) • WDV-25 (25”/635mm ID) WDV-8 ,10, & 14 are available in 115Volt/60Hz and 230Volt/50Hz Models. WDV-16 and 24 are available in 220 Volt/60Hz and 230Volt/50Hz Models. All Models are Available with our exclusive AC Option. The WDV Power Supplies offer the operator Infinite Variable Control on the DC Output of the Coil. All WD-Series Coils have a DC output greater than 10,000 Amp Turns, meeting the most stringent specifications. WDV-Series Coils have gained a very favorable, World wide, reputation for their manual Reversing DC Demagnetization capability. Reversing DC Demag is accomplished by Revising the Polarity Switch, Reducing the Amperage followed by a brief shot, by Energizing the Coil. This Reducing - Reversing step is repeated, until the Field is reduced to a desirable level. The AC Option would be selected if the operator wants to Demag small parts, or must inspect in an active AC Field. WDV-AC Coils typically provide an AC field well over 4000 Amp Turns. Features • DC Magnetization • Reversing DC Demagnitization • Variable Output 0-10,000 Amp-turns • Digital Amp Meter - Constant Reading • Solid State Electronic Controls • Fully Self Contained - No External Power Supply Specifications Models All sizes of WDV or WDP Series Coils Voltage 115VAC or 230VAC (Nominal) Current WDV - 0 to 20 Amps (Model Dependent) Capacity WDV - 0 to 16,000 Amp-Turns (Model Dependent) WDP - 10,000 Amp-Turns (min. values) Frequency 50 or 60Hz Size 8.5”, 10.5”,14”, 16” 25” ID Min. Weight Model & Size Dependant 23 to 52lbs. (10.5-23.6kg) *Standard Voltage is 115 VAC, 230 VAC is optional. *Options; Cast Feet; and Removable Power Cord, ID Wear Bars, AC Output, Foot Switch. *Separate Power Supplies are available for retrofitting coils. Download PDF Data SheetClick to download WD Series Manual Click to download WDV 16 Coils ManualClick to download WD Coils Ref Click to download Buy Now Albuquerque Industrial http://www.abqindustrial.net/store/wdseries-dc-magnetizing-coils-p-582.html Fri, 26 Mar 2010 15:48:23 -0500 USD 582 1000 WD Coils http://www.abqindustrial.net/store/images/wd_main.jpg http://www.abqindustrial.net/store/waseries-ac-magnetizing-coils-p-581.html http://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=581 ]]> Price: $995.00 to $1,795.00 AC & Only AC/DC Magnetizing Coils 3000 Amp Turns (AC Output) and 4000 Amp Turns (DC Output) Light Weight & Comfortable to Hold Built-in Switch (Optional Footswitch available) WA-Series Coils Western Instruments WA-Series Coils were designed for Oil Country Tubular Goods Inspectors, with particular emphasis on Collars and other Bottom Hole Assemblies. However, these Coils 'pack enough punch' to make them suitable for numerous other industrial inspection applications. WA-Series Portable Magnetic Particle Testing Coils utilize our advanced Mechanical, Electrical, and Solid State Electronics designs and allows Western to offer them in both AC and AC/DC models. These advanced designs, which are similar to our W-Series Yokes, ensure the best quality product for excellent operator mobility and equipment longevity. The aluminum wire coil is precision wound using the most advanced techniques, to ensure the most homogeneous magnetic field possible. The wire core is cast in a hard wear resistant Urethane Rubber housing, which reduces impact to the core, for years of maintenance free operation. WA-Series coils are designed to be comfortable to hold, but are available with optional Cast Feet . The Solid State Controls are completely contained in the Cast Urethane Rubber Housing located on the top of the coil. The activation switch is of sealed construction, has a grounded cover, and in turn is sealed with a Urethane Rubber membrane. The double seal switch system is designed for; operator safety; comfort; is very rugged; and is easily activated by the operators Thumb. All of the electrical and electronic components are mounted on the reverse side of the Control Housing Cover, making maintenance and service very convenient. While intended to be hand held, WA-Series Coils are available with options such as; a Foot Switch; Carrying Handle, and Cast Feet for Table Top use and to prevent the coil from rolling. Like all W-Series products, the Power Cord Strain Relief system is without question the most durable in the industry. The WM-5C is our Cable Type Permanent Magnet Yoke. The Coated Cable allows a great deal of flexibility to easily permit maximum contact area between the Non-Ferrous contact surface and the workpiece. The Hand Grip is Ergonomically designed for operator comfort, with provisions for easy removal off the workpiece. WA-Series Coils are available with two different Field Modules; the WAC-10 is equipped with an AC module; while the WAD-10 Coil is equipped with an AC/DC module. AC Fields are utilized for surface defects, while DC Fields provide Sub-surface sensitivity. The WAD-10 has infinitely variable pulsed DC output, as well as the AC mode. The AC/DC Selector Switch, and variable DC knob are mounted on the control housing cover. Now you can have far more versatility and reproducibility while using a Coil for inspection. Features • AC & AC/DC Models • 3000 Ampere Turns AC Output • 4000 Ampere Turns AC Output • Light Weight • Comfortable to Hold • Urethane Rubber Encapsulant • Built in Switch (Optional Foot Switch) Applications • Oilfield Tubulars • Fasteners, Automotive • Demagnetization • Aerospace, Weld Inspection • Pressure Equipment • Piping, Fabrication • Manufacturing, Maintenance Specifications   WAC-10 WAD-10 Voltage 115 or 230 VAC(WAC-10K) 115 or 230 VAC (WAD-10K) Frequency 50 or 60Hz 50 or 60Hz Output AC 3000 Amp Turns 3000 Amp Turns Output DC ------ 4000 Amp Turns Size 10” ID (250mm) 10” ID (250mm) Current 13 Amps 13 Amps Weight 14.5 pounds (6.6kg) 14.8 pounds (6.7kg) *options: Cast Feet, Handle, Foot Switch, Cast Feet/Handles Download PDF Data SheetClick to download Manual Click to download Buy Now Albuquerque Industrial http://www.abqindustrial.net/store/waseries-ac-magnetizing-coils-p-581.html Fri, 26 Mar 2010 15:40:23 -0500 USD 581 1000 WA Coils http://www.abqindustrial.net/store/images/products/wa_main.jpg