Albuquerque Industrial : RSS Products Feed :: Tension Indicators & Amplifiers

MU621 Tension Indicator/Amplifier Console

Albuquerque Industrial — Fri, 04 Jun 2010 14:55:46 -0500

]]>Measuring amplifier unit for field installation MU621 Tension Indicator/Amplifier Console � for strain gauge sensors � 1 to 4 measuring channels � includes TS621 Amplifier and DPM502 Indicator � scalable to all engineering units � requires 24V DC power � rugged industrial design in steel plate-housing Photo Gallery - click any photo to enlarge Related Products RFS On-Line Tension Sensor Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed Overload protection up to 800% _ DPM502 Digital Tension Indicator Selectable �damping function� reduces display fluctuations 24V DC power supply with galvanic isolation _ TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output _ HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors Real time display of measured values graphically and digitally, indicating the actual value in tension units Export data in ASCII format

TD-1-TS Tension Indicator

Albuquerque Industrial — Fri, 04 Jun 2010 14:53:03 -0500

]]>Tension Indicator Designed for use with the TS621 Strain Gauge Amplifier or the RFSE Tension Sensor TD-1-TS Tension Indicator Accurately displays tension values calibrated in any unit of measure on a bright LED display, designed for flush panel mounting. Calibration and alarm settings are adjusted using screw potentiometers located behind the removable front panel. Features Designed for use with the TS621 Strain Gauge Amplifier or the RFSE Tension Sensor Provides 24 VDC power for TS621or RFSE User-set High & Low Alarm Limits with relays 4-20 mA and 0-10 VDC analog output (user set) Related Products RFS On-Line Tension Sensor Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed Overload protection up to 800% _ TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output Specifications Display Range 0� 1999 (calibrated for any units) Display 3 1 /2 - digit Red LED, 14.4mm high Decimal Point User-selected via internal jumper Power Supply 24 VDC @ 100mA Analog Output 4�20 mA or 0�10 VDC, user selected Frequency Response 1 Hz (with damping filter) 40 Hz (without damping filter) Enclosure Material High-Impact Plastic Dimensions 3.78" W x 1.89" H x 4.04" D (96 x 48 x 103mm) Panel Cutout 92 x 44mm Operating Temperature 32 to 122� F (0�50� C) Relay Operation Hi�Hi/Hi or Hi�Lo Relay Rating 1 Amp @ 250 VAC/ 30 VDC, normally open Power Required 115/ 230 VAC + 10%, 50/ 60 Hz

TS481 Strain Gauge Measurement Amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:52:36 -0500

]]>Strain Gauge Measurement Amplifier The TS481 Strain Gauge Amplifier Card is designed for use with the RFS/NWS & WTS Tension Sensors TS481 Strain Gauge Measurement Amplifier TS481-19 (19" Rack Mounted) TS481-M (Surface Mounted) The TS481 Strain Gauge Amplifier Card is designed for use with the RFS/NWS & WTS Tension Sensors. It is offered in two versions: Surface Mounted (M) and 19" Rack Mounted (19). Features Galvanic Isolation minimizes the chance for signal interference, including ground faults Optional "Explosion Proof" configuration Provides accuracy of �0.1% 0 - 10VDC analog output is standard. A current output option can be added providing 0-20/4-20mA (option A) User-enabled "damping function" eliminates tension fluctuations Related Products TS481-SKBI Plug-in card block for TS481-19 _ HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors Real time display of measured values graphically and digitally, indicating the actual value in tension units Export data in ASCII format Specifications Sensor Types Strain Gauge, full bridge Impedance Range Minimum 150 Ohms Overall Accuracy 0.1% (any portion of the range) Power Required 115 VAC, 50/60 Hz For 230 VAC version add "-230" suffix (i.e. TS481-M-230) Power Supply to Sensor 10 VDC, regulated (�5 VDC referenced to ground) Calibration Range 60 to 450% Isolation between I/O Galvanic Isolation using integrated DC-DC converter between input power & output signals Power Consumption 100 mA @ 24 VDC Temperature Coefficient < 0.05% per �C Mounting Style TS481-19: Rack Mount TS481-M: Surface Mount Connector Types TS481-19: Blade Contacts, 32 poles per DIN 41612D TS481-M: Screw Terminals Dimensions (in mm) TS481-19: 100 x 1600 (3HE/6TE) TS481-M: 107 (L) x 207 (W) x 40 (H) Weight TS481-19: 400 grams TS481-M: 600 grams

CMA03-CH Cable mounted strain gauge measuring amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:52:07 -0500

]]>Cable mounted strain gauge measuring amplifier - Cylindrical Housing Design Cable mounted strain gauge measuring amplifier - Cylindrical Housing Design The measuring amplifier CMA 03-CH is designed for universal use with strain gauge-based sensors. The special mechanical design as a cable mounted measuring amplifier allows a quick and space-saving installation without costly installation work. CMA 03-CH amplifies the mV-signal of the sensor into the 10V-range. Installing the amplifier near the sensor increases interference resistance on signal transmission, e.g. in large facilities. Best temperature stability, long-term stability and high accuracy are guaranteed by using modern technology. Features Compact and robust aluminium flanged housing 24V DC power supply, reverse-polarity protected Available with voltage output 0 to �10V or current output 0/4 to +20mA, unipolar Fixed connection between sensor and amplifier Great noise immunity and service reliability for use in rough industrial operation Photo Gallery - click any photo to enlarge Dimensions Related Products DPM502 Digital Tension Indicator Selectable �damping function� reduces display fluctuations 24V DC power supply with galvanic isolation

KMV-04 Cable mounted strain gauge measuring amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:51:39 -0500

]]>Cable mounted strain gauge measuring amplifier KMV-04 Cable mounted strain gauge measuring amplifier The measuring amplifier KMV-04 is designed for universal use, esp. for tension measurement in rotating areas. Best temperature stability, long-term stability and high accuracy are guaranteed by using modern technology. The compact design of this cable mounted measuring amplifier allows the flexible use with various strain gauge based sensors, when signal conditioning must be done directly at the sensor (e.g. for the use of sliprings in rotating areas). Features Compact and robust aluminium flanged housing Input power supply of 24V DC, reverse-polarity protected Available with voltage output 0 to �10V or current output 0/4 to +20mA, unipolar Fixed connection between sensor and amplifier Great noise immunity and service reliability for use in rough industrial operation Dimensions Related Products RFS On-Line Tension Sensor Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed Overload protection up to 800% _ DPM502 Digital Tension Indicator Selectable �damping function� reduces display fluctuations 24V DC power supply with galvanic isolation Specifications PDF Click here to download PDF specifications

DPM502 Digital Tension Indicator

Albuquerque Industrial — Fri, 04 Jun 2010 14:51:15 -0500

]]>Digital Tension Indicator Designed to connect to the TS621 or TS481 Strain Gauge Amplifier, as well as the RFSE Tension Sensor DPM502 Digital Tension Indicator The DPM502 is designed to connect to the TS621 or TS481 Strain Gauge Amplifier, as well as the RFSE Tension Sensor. It incorporates built-in calibration adjustments to scale the tension values into display units. The 3-1/2 LED display has a user-set decimal point and will display values up to 1999. Faceplate is easily removed to make calibration adjustments. Features Selectable �damping function� reduces display fluctuations scaling by means of 2 multiturn trimmers (rough / coarse) Easy snap-in installation 24V DC power supply with galvanic isolation User Controls User control pots & dip switches are accessed behind display panel. Related Products RFS On-Line Tension Sensor Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed Overload protection up to 800% _ TS481 Strain Gauge Measurement Amplifier Galvanic Isolation minimizes the chance for signal interference, including ground faults Provides accuracy of �0.1% User-enabled "damping function" eliminates tension fluctuations _ TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output _ MU621 Tension Indicator/Amplifier Console for strain gauge sensors 1 to 4 measuring channels Specifications Display 3 1 /2 - digit LED (1999 max.) 14mm height Decimal Point User-Selected Damping Rate 0.2 to 4 sec. Display Update Rate 0.5 sec. Power Required 24 VDC @ 50 mA (approx) Panel Cutout 92 x 22mm Weight 3.5 ounces (100 g) Dimensions 3.7" W x 3" D x 1" H (96 x 77 x 24mm) Dimensions

TM-353 Analog Tension Indicator with Built-In Amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:50:42 -0500

]]>Analog Tension Display with Built-In Amplifier The Check-Line TM-353 analog tension indicator features precision electronics for connection to all Capacitive-Based hand-held Tension Sensors TM-353 Analog Tension Indicator with Built-In Amplifier The new CHECK LINE Model TM-353 analog tension indicator features precision electronics for connection to all Capacitive-Based hand-held Tension Sensors. The scale can be marked with empirical units (0-100%) or, optionally, calibrated to display values in two(2) different tension ranges with any units of measure (grams, cN, daN, Kg, Newtons, etc.) The analog display, permits the user to quickly observe the range of tension fluctuations, as well as the frequency of change, by viewing the motion of the "sweeping" pointer.� �Features �Zero adjustment compensates for all measurement positions � Provides 0-1 VDC analog output for recording purposes �Supplied with 6 ft. (2 meter) cable with high-quality, DIN-style locking connectors at both ends �Three amplification settings are user-selected to provide maximum display resolution �Powered by a single 9 volt battery �Related Products HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors �Real time display of measured values graphically and digitally, indicating the actual value in tension units �Export data in ASCII format � �Specifications Scale Marking 0-10 and 0-3 (custom scales are available for any range) � Display Type Analog Meter � Output 0 to 1 VDC proportional to user-selected full scale range � Amplification 1X, 2X or 5X (connector located on top panel of housing) � Accessories Sensor connection cable, 6ft long � Battery Type 9V Alkaline � Dimensions 6.2" x 3.8" x 2" (H x W x D) 158 x 96 x 50 mm (H x W x D)� Weight 1.3 lbs (0.6 kg) �

SC Series Tension Indicator

Albuquerque Industrial — Fri, 04 Jun 2010 14:50:06 -0500

]]>Tension Indicator The new SC Series Tension Indicators permit the user to connect from one to three THR 3-Roller Tension Sensors SC Series Tension Indicators SC-1-N (1 Channel) SC-2-N (2 Channel) SC-3-N (3 Channel) The new SC Series Tension Indicators permit the user to connect from one to three THR 3-Roller Tension Sensors. The SC indicators provide a regulated DC power source for the sensors and include a 3-1/2 digit LED tension display, calibration adjustment pots and 0-10 VDC analog outputs. � �Features �Supplies separate 0-10 VDC analog output for each channel �Adjustable output frequency of 1.6/3.3/15/330 Hz. �Front panel calibration adjustment pots for each channel �Includes wall-mounted bracket �Includes AC-Adapter, 115 VAC (for 230 VAC, add "-220" suffix) �Specifications Display Ranges 0-50.0, 0-100.0, 0-199.9, 0-500, 0-1000, 0-1999, 0-2.00, 0-5.00, 0-10.00 and 0-19.99, switch selectable� Units of Measure grams, cN or volts � Power for Sensors �12 V DC � Analog Output 0-10 V DC, proportional to tension � Frequency Response 1.6, 3.3, 15 or 330 Hz, selectable � Enclosure Extruded aluminum � Dimensions 7.5 x 4.2 x 1.3" (190 x 106 x 34mm) � Power Required 9-15 V DC or 9-15 V AC (supplied with AC-Adaptor) � Operating Temp. 32 to 120� F (0 to 45� C) � Accessories Included AC Adaptor, Mounting bracket, output plugs (3) and instruction manual �

TD-1-TE Tension Indicator

Albuquerque Industrial — Fri, 04 Jun 2010 14:49:50 -0500

]]>Tension Indicator Provides an accurate tension display for all Check-Line sensors on a bright LED display TD-1-TE Tension Indicator Provides an accurate tension display for all Check-Line sensors on a bright LED display. It is easy to set up and use, and permits easy flush panel mounting in a 1/8 DIN cutout.� �Features �User-set High & Low Alarm Limits with relays �TD-1 provides regulated +5 V DC for SR sensors �4-20 mA and 0-10 VDC analog output for recording and control purpose �TD-1-TE provides regulated +15 V DC for THR Sensors (requires option "A" on Tension Sensor) �Optional Connecting Cable for Sensor �Rear Panel Of Indicator �Specifications Display Range 0-1999 � Display 3�-digit Red LED, 14.4 mm high � Decimal Point User selected via internal jumper � Power For Sensors + 5 V DC, regulated (TD-1) + 15 V DC, regulated (TD-1-TE)� Analog Output 4-20 m A or 0-10 V DC, user selected � Frequency Response 100 Hz � Enclosure High-Impact Plastic � Dimensions 3.78" L x 1.89" H x 4.04" D (96 x 48 x 103mm)� Panel Cutout (TD-1) 92 x 44mm � Operation Temperature 32 to 122� F (0-50� C) � Relay Operation Hi-Hi/Hi or Hi-Lo � Relay Rating 1 Amp @ 250 V AC/30 V DC, normally open� Power Required 115/230 VAC �10%, 50/60 Hz�

TS621 Strain Gauge Amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:49:26 -0500

]]>Tension Indicator Provides an accurate tension display for all Check-Line sensors on a bright LED display Strain Gauge Amplifier The TS621 Electronic Strain Gauge Amplifier provides outstanding signal conditioning capabilities suitable for use with most strain-gauge-based sensors. It is supplied in a DIN-Rail housing for convenient snap-in installation. TS621 performance features include galvanic isolation, regulated power supply for the sensor, coarse and fine calibration adjustments, screw terminals for power and analog outputs, with a removable terminal block for the sensor input. � �Features �Designed for use with a wide range of strain-gauge-based force, load and tension sensors �Galvanic Isolation minimizes the chance for signal interference, including ground faults �0-10VDC analog output �Provides accuracy of �0.1% �Operating input power supply of 19-36 VDC, non-regulated �Includes excellent overload and reverse-polarity protection �Provides a well-regulated power supply of 10 VDC for sensor �Options . In standard version the measurement amplifier offers a voltage output. The TS 621 can be extended with one additional output. Option D 2nd voltage output 0 to �10V � selectable cut-off frequency � 0.5 - 5 - 10 - 20 Hz � setting by DIP-switches � click to view animation Tension signal with a dynamic part (frequency approx. 3Hz) Cutoff Frequency = 5Hz Option X 2nd voltage output 0 to �10V � Additional amplification, selectable 2-, 3-, 4- or 5-times � filtered (cut-off-frequency 25Hz) � setting by DIP-switches Option A Additional current output � bipolar 0 to �20mA � unipolar 0 to +20mA � unipolar 4 to +20mA � setting by DIP-switches �Photo Gallery - click any photo to enlarge �� Related Products RFS On-Line Tension Sensor �Resolution of 0.1% and better �Rugged stainless steel housing is environmentally sealed �Overload protection up to 800% � _ DPM502 Digital Tension Indicator �Selectable �damping function� reduces display fluctuations �24V DC power supply with galvanic isolation � _ MU621 Tension Indicator/Amplifier Console �for strain gauge sensors �1 to 4 measuring channels � _ HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors �Real time display of measured values graphically and digitally, indicating the actual value in tension units �Export data in ASCII format � TS621HD High Dynamic Amplifier Intended for amplification of high frequency sensor signals Large gain bandwidth; DC to 20kHz 24V DC power supply Galvanic Isolation � �Specifications Sensor Types Strain Gauge, full bridge � Impedance Range Minimum 150 Ohms � Overall Accuracy 0.1% (any portion of the range) � Power Source Required 19 to 36 VDC (24 VDC, typical) Optional: 9 to 18 VDC (12 VDC, typical)� Power Supply to Sensor 10 VDC, regulated (�5 VDC referenced to ground) � Calibration Range 38 to 580% � Output from TS621 0-10 VDC (standard) � Optional Outputs Current (option A), 0-20/4-20 mA, user set Amplified voltage (option X),2X, 3X, 4X, 5X amplification, user set Damped voltage (option D) at 4 seconds� Isolation between I/O Galvanic Isolation using integrated DC-DC converter between input power & output signals� Power Consumption 100 mA @ 24 VDC � Operating Temperature 32 to 140 �F (0 to 60 �C) � Connector Types Screw Terminals � Dimensions 3.1" (H) x 1" (W) x 3.7" (D) (80 x 25 x 95mm) � Weight 4 ounces (100 grams) � Mounting Style DIN-Rail Snap-In Installation (DIN-rail not provided) �

D-485 Digital Tension Indicator with Built-In Amplifier

Albuquerque Industrial — Fri, 04 Jun 2010 14:49:00 -0500

]]>Digital Tension Display with Built-In Amplifier The battery-powered D-485 features a digital display with peak capture, adjustable averaging and automatic zero D-485 Digital Tension Indicator with Built-In Amplifier The battery-powered D-485 features a digital display with peak capture, adjustable averaging and automatic zero. Specify D-485-P for calibration in pounds (lbs.).� �Related Products HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors �Real time display of measured values graphically and digitally, indicating the actual value in tension units �Export data in ASCII format � �Features �Automatic zero setting �"Peak" function retains maximum reading on display �User-set averaging between 0.3 and 1.5 seconds �Rugged plastic housing �Low battery indicator �Built-in calibration adjustment potentiometer �"Hold" function retains last reading on display �High-contrast, easy-to-read 13 mm LCD display �Operates on a single 9V battery �Specifications Display LCD, 13 mm 3 1/2 digit� Functions Automatic zero setting Averaging display Maximum value� Accessories Sensor connection cable, 2 m long� Dimensions 6.7" x 2.6" x 1.6" in (H x W x D) 65 x 40 x 170 mm (H x W x D)� Weight 0.2 kg�