https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Fri, 12 Jun 2026 04:59:17 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/flaw-detectors-c-100_51/dakota-ultrasonics-ti-dfx7-ultrasonic-flaw-detector-thickness-gauge-p-818.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=818 Ultrasonic Flaw Detector & Thickness GaugeThe TI-DFX7 Ultrasonic Flaw Detector uses the latest Color LCD Technology with super-fast re-fresh rate. Features Flaw Detector FeaturesTRIGTrigonometric display of beam path, depth, surface distance, and curved surface correction. Used with angle beam transducersDACUp to 8 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB. Amplitude displayed in %DAC or dBAWSAutomatic defect sizing in accordance with AWS D1.1 structural welding codeAVG/DGSAutomatic defect sizing using probe data. Stores up to 64 custom setupsTCGTime corrected gain. 50 dB dynamic range, 20 dB per microsecond, up to 8 points for curve definitionMeasurement ModePulse-Echo (P-E) measures from 0.025 in to 100 ft. (0.63mm to 3048 cm)Auto-CalProvides automatic calibration with two reference pointsDetection ModesZero Crossing, Flank and PeakDisplay FreezeHold current waveform on screenPeak MemoryFor echodynamic pattern determination Thickness Gauge FeaturesMeasurement Modes (Dual Element):Pulse-Echo Mode (P-E)(Pit & Flaw Detection) measures from 0.025 in to 100 ft. (0.63mm to 3048 cm)Pulse-Echo Coating Mode (PECT)(Material, Coating, Pit & Flaw Detection): Material: 0.025 in to 100 ft. (0.63mm to 3048 cm). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters)Pulse-Echo Temp Comp Mode (PETP)(Pit & Flaw Detection) Auto temperature compensation – measures from 0.025 in to 100 ft. (0.63 mm to 3048 cm)Echo-Echo Mode (E-E)(Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102 millimeters). Will vary based on coatingEcho-Echo Verify (E-EV)(Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coatingCoating Only Mode (CT)(Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coatingOne and two point calibration option for material & coating, or selection of basic material types.Auto probe zero, recognition and temperature compensationHigh speed scan up to 50 readings per secondAudible alarm with hi/lo limitsBuilt-in differential mode for QC inspections64 custom setup configurations Specifications GeneralSize2.5W x .5H x 1.24D in (63.5 x 165 x 31.5mm)Weight14 ounces (.397kgs), with batteriesCaseExtruded aluminum body with nickel plated aluminum end caps (gasket sealed)Display1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 16 color pallete, multiple color options, and variable brightnessScreen Refresh RateSelectable 60 or 120HzDisplay ViewsFlaw Detector: Full wave, +/- Rectified, or RF. Thickness Gauge: Digits, +/- Rectified, RF, or B-ScanTimingPrecision 25MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizerMeasurement GatesTwo independent gates (Flaw), and three gates (thickness). Start & width adjustable over full range. Amplitude 5-95%, 1% steps. Positive or negative triggering for each gate with audible and visual alarmsOperating Temperature14 to 140F (-10C to 60C)EnvironmentalMeets IP65 requirementsWarranty2 year limited CalibrationAutomatic CalibrationLongitudinal (straight), or Shear (angle)Probe TypesSingle Contact, Dual, Delay, and AngleUnitsEnglish (in), Metric (mm), or Time (ìs)Velocity0.0100 to 0.6300 in/ìs (256–16,000 m/s)Test Range0 to 0.280in (7.11mm) minimum, to 1200in (30,480mm) maximum at steel velocity. Continuously variableZero Offset (Probe Zero)0–999.999 ìsMaterial Velocity TableContains longitudinal and shear velocities for a variety of material types PulserPulser TypeTwo adjustable square wave pulsers and receiversP.R.F.8 to 333Hz in selectable steps (8, 16, 32, 66, 125, 250, 333Hz)Pulser Voltage200 volt peak amplitude, rise/fall time < 10ns into 50ohmPulse Width40 to 400 ns. Selectable step options (spike, thin or wide) ReceiverGain0 to 110dB with 0.2dB resolution. Manual and AGC controlDamping50, 75, 100, 300, 600, & 1500 ohmsFrequency BandsDFX-7 & 7+: Broadband 1.8 – 19 MHz (-3dB). DFX-7+: Three narrow bands centered at 2MHz, 5MHz, 10MHzHorizontal Linearity+/- 0.4% FSWVertical Linearity+/- 1% FSHAmplifier Linearity+/- 1 dBAmplitude Measurement0 to 100% FSH, with 1% resolutionDelay0 - 999in (25,375mm) at steel velocity MemoryLog FormatsGrid (Alpha Numeric), or Sequential (Auto Identifier)Graphics On8,000 readings, A/B Scan image, & all gauge settings for every readingGraphics Off210,000 readings (coating, material, min & max. (Thickness gauge only)Custom Setups64 user configurations Power SourceBatteryThree 1.5V alkaline, 1.2V AA Nicad cells, 1.2V AA NI-MH, or other other equivalent power sourceBattery life (continuous use) Alkaline (12hrs), Nicad (5hrs), and NI-MH (12hrs), with default settings ConnectionsOutputRS232 serial interface. PC software & USB converter cable includedTransducer ConnectorsTwo LEMO 00 connectors CertificationThickness GaugeFactory calibration traceable to NIST & MIL-STD-45662AFlaw DetectorEN12668-1 compliant Downloads TI-DFX7 Ultrasonic Flaw Detector & Thickness Gauge -ListTI-DFX7 Ultrasonic Flaw Detector & Thickness Gauge - Instruction ManualTI-DFX7 Ultrasonic Flaw Detector & Thickness Gauge - FlawManualTI-DFX7 Ultrasonic Flaw Detector & Thickness Gauge -Gauge Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/flaw-detectors-c-100_51/dakota-ultrasonics-ti-dfx7-ultrasonic-flaw-detector-thickness-gauge-p-818.html Sun, 03 May 2026 16:57:10 +0000 USD 818 Dakota Ultrasonics 992 TI-DFX7 https://www.abqindustrial.net/store/images/TI-DFX7-Ultrasonic.jpg 818 8 images/manufacturers_warranty/11/warranty-5-new.png