https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Fri, 12 Jun 2026 04:59:17 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/checkline-tsd-torque-screwdriver-p-785.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=785 Checkline TSD Digital Torque Screwdriver3 Ranges, Up to 35 lbf-in capacityUnits of measure: lb-in, kg-cm, cN-m3 ModelsTSD-50: Measuring Range: 0.45 - 4.50 lb-in / 5.0 - 50.0 cN-M (0.05 - 0.5 Nm)TSD-200: 1.70 - 17.70 lb-in / 20.0 - 200.0 cN-M (0.2 - 2 Nm)TSD-400: Measuring Range: 3.50 - 35.00 lb-in / 40.0 - 400.0 cN-M (0.4 - 4 Nm) Checkline TSD digital torque screwdrivers are designed for accurate measurement of application and removal torque of screws and fasteners. The TSD measures bi-directional torque in real-time or peak modes. 9 programmable target values can be preset to allow the operator to quickly fasten screws using audible and visual indicators to alert when the target value is reached or passed.The TSD uses standard 1/4" hex bits allowing it to be used on a wide range of applications. An auto-locking bit holder allows for quick changing between sizes Kit Contents TSD Torque ScrewdriverPhillips size 0 bit (2.1in / 55mm length)Factory Calibration Cert1 AAA batteryInstruction ManualCarrying Case Click image to enlarge Features Uses standard 1/4" bitsClockwise & Counter Clockwise Torque Measurement9 Programmable Target Torque SetpointsReal time & Peak Torque MeasurementDisplay Units: lb-in, cN-M and Kg-cm1 AAA battery provides 12 hours of continuous useCE Certified Specifications AccuracyClockwise: ±2% Counterclockwise: ±3% (of indicated)Guaranteed from 20-100% of capacity.Presets9 Programmable setpoints with both audible beep and Green/Red LED indicatorMemory50 readingsPresets9 Programmable setpoints with both audible beep and Green/Red LED indicatorDrive1/4 Inch - 6.35 mm HexOperating ModesPeak / Track (real-time)Power Supply1x AAA Battery (included)Working Time12 hours continuous useAuto OffAutomatic power off after 5 minutes of non-useOperating Temp.-10°C - 60°CStorage Temp.-20°C - 70°CDimensionsLength (without bit): 200mm / 8inDiameter at largest point: 29.5mm / 1.16inWeight430gWarranty1 Year Force Ranges ModelRangeResolutionTSD-500.45 - 4.50 lb-in | 5.0 - 50.0 cN-M | 0.50 - 5.00 kg-cm0.01 lb-in | 0.1 cN-M | 0.01 kg-cmTSD-2001.70 - 17.70 lb-in | 20.0 - 200.0 cN-M | 2.00 - 20.00 kg-cm0.01 lb-in | 0.1 cN-M | 0.01 kg-cmTSD-4003.50 - 35.00 lb-in | 40.0 - 400.0 cN-M | 4.00 - 40.00 kg-cm0.01 lb-in | 0.1 cN-M | 0.01 kg-cm Quick Start Instructions Press C to power on screwdriver.Press U/S to select desired measuring unit.To select TRACK or PEAK mode press and hold the U/S key for 2 seconds, the display will show MODE, then press the up or down key to select between PEAK or TRACK mode (indicated by a small P or T in the bottom right corner of display). Then press the U/Skey three times to confirm your selection and return to measurement mode.Use up and down arrow keys to enter target torque. If you are simply measuring and do not have a target, adjust the setpoint to the highest value (maximum capacity of the screwdriver).Note, when there is no torque applied the TSD will display the target value or previous reading (in Peak mode). Related Products DID-4Digital Torque ScrewdriverPeak, Real Time and Peak Down measuring mode (selectable)Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-useUSB data output for SPC capability Click image for more info TT-QCTorque Tool Tester - AWS-QCBidirectional accuracy of ± 1% of indicated reading Click image for more info GLKDigital Torque ScrewdriverFive programmable torque presets ideal for frequent operationsHigh accuracy ±1.5% F.S. both CW and CCW directions Click image for more info Downloads TSD Torque Screwdriver - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/checkline-tsd-torque-screwdriver-p-785.html Thu, 31 Jul 2025 18:04:38 +0000 USD 785 Checkline 572 TSD https://www.abqindustrial.net/store/images/products/TSD-torque-screwdriver.jpg https://www.abqindustrial.net/store/images/additional/tsd-torque-screwdriver-724.jpg https://www.abqindustrial.net/store/images/additional/tsd-torque-screwdriver-725.jpg https://www.abqindustrial.net/store/images/additional/tsd-torque-screwdriver-726.jpg https://www.abqindustrial.net/store/images/additional/tsd-torque-screwdriver-727.jpg https://www.abqindustrial.net/store/images/additional/tsd-torque-screwdriver-728.jpg 785 428 /store/images/warranty-1-year-new.png