https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-mikrotest-banana-gauge-magnetic-coating-thickness-gauge-p-568.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=568 Magnetic Coating Thickness GaugeBanana Gauge11 different analog models available for every applicationSuitable for measurement on curved surfacesThe MikroTest Banana Gauge is the most widely used coating thickness gauge in the world over the last 40 years. The MikroTest Banana Gauge complies with the highest technical standards of all analogue magnetic coating thickness gauges. This magnetic coating thickness gauge works on the magnetic attraction principle to measure all non-magnetic coatings on steel and galvanic nickel on steel.The MikroTest is supplied in 11 different models to be suitable for every requested application. The balanced measuring system ensures accurate readings at any angle: horizontal, vertical and overhead. Also, the gauge allows measurements on curved surfaces. It is also able to provide you with precise measurements in tubes and on round parts due to the automatic operation.The measurement of the coating thickness is based on magnetic attraction. The attractive force is related to the distance between a permanent magnet and a steel substrate. This distance represents the thickness of the coating under measure. The magnet is lifted from the surface by means of a spring connected to the magnet arm. The force needed to lift the magnet is directly related to the angle of rotation of the torsion spring. This measuring principle is also especially suited for electroplated nickel on copper, aluminum and other non-ferrous metals. This measurement principle ensures fully automatic measurement where no power supply or calibration is required.MikroTest FM 5 Gage, Coating Thickness, 0 to 40 milsNew Part #: 80-638-0101Old Part #: MIK/010100NSN: 5220-12-327-2245 Kit Contents MikroTest gaugeHand strapPlastic carrying caseOperating instructions Click image to enlarge Features Mils Models Include a NIST traceable calibration certificate, Micron Models include factory "works" certificateHighest accuracy with simplest operationNo calibration requiredSimple set-up and measurementAll gauges operate without power or batteryOne point measurementMetal Housing provides protection from mechanical shocksMetal Housing and measuring system is resistant to solventsAutomatic models control realease of magnet for highest accuracy and repeatability Specifications Ambient Temperature-20 °C - 100 °CConforming StandardsDIN EN ISO 2178, DIN 50 982, ASTM B 499, E 376, D 1186, G 12, B 530, BS 5411, ISO 2361DimensionsGauge: 215 mm x 55 mm x 29 mm Plastic carrying case: 235 mm x 185 mm x 46 mmWeightCase incl. gauge approx. 560 gCalibration ShimsHere are the two technical reasons why you cannot use plastic shims/foils plus zero plate to check calibration of MikroTest:1. All Plastic Shims/Foils have a certain prestress which has the effect that they are slightly bent when the magnet lifts off and this effect is similar to the effect of a spring will cause inaccurate readings2. The Plastic Shims/Foils have a certain electrostatic charge which also causes inaccurate readings. Demo Video Adjust dial to value higher than the expected thicknessPlace gauge on surface to be measuredPress button on bottom of handle take make the magnet adhere to surfaceSlowly turn wheel backwards until you hear a click and the magnet liftsRead thickness value Models TypeRangeTypical ApplicationToleranceGMG4 mils100 micronElectroplating and Paint on Steel± 1 μm or 5% of readingFMF40 mils1000 micronPaint On Steel± 5 μm or 5% of readingS3MS38 - 120 mils0.2 - 3 mmEnamel, Paint on Steel5% of readingS5MS520 - 200 mils0.5 - 5 mmEnamel, Paint on Steel5% of readingS10MS100.1 - 0.4 inches2.5 - 10 mmEnamel, Paint on Steel5% of readingS20MS200.3 - 0.8 inches7.5 - 20 mmEnamel, Paint on Steel5% of readingNi50MNi502 mils50 micronElectroplated Nickel on Non-Ferrous± (1 μm + 5% of reading)Ni100MNi1004 mils100 micronElectroplated Nickel on Non-Ferrous± (1 μm + 5% of reading)NiFe50MNiFe502 mils50 micronElectroplated Nickel on Steel± (2 μm + 8% of reading)TypeMin SurfaceMin RadiusMin Base ThicknessGMGØ 20 mm5 mm convex / 25 mm concave0.5 mmFMFØ 30 mmmm convex / 25 mm concave0.5 mmS3MS3Ø 30 mm15 mm convex / 25 mm concave1.0 mmS5MS5Ø 50 mm15 mm convex / 25 mm concave1.0 mmS10MS10Ø 50 mm15 mm convex / 25 mm concave2.0 mmS20MS20Ø 100 mm100 mm convex / 150 mm concave7.0 mmNi50MNi50Ø 15 mm5 mm convex / 25 mm concave-Ni100MNi100Ø 15 mm5 mm convex / 25 mm concave-NiFe50MNiFe50Ø 20 mm10 mm convex / 25 mm concave0.5 mm High Temperature Option An Optional High Temperature Kit is offered (MK-HT) for using MikroTest models on surface temperatures up to 212°F (100°C). It can also be used on surface temperatures up to 572°F (300°C), but the MikroTest must be limited to less than 5 seconds of surface contact or damage will result. The MK-HT Kit consists of aluminum feet and sensor prism. Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-mikrotest-banana-gauge-magnetic-coating-thickness-gauge-p-568.html Wed, 25 Jun 2025 19:02:54 +0000 USD 568 ElektroPhysik 943 MikroTest https://www.abqindustrial.net/store/images/products/MikroTest_Magnetic_Coating_Thickness_Gauge.jpg https://www.abqindustrial.net/store/images/additional/elektrophysik-mikrotest-magnetic-coating-thickness-gauge-5648.jpg https://www.abqindustrial.net/store/images/additional/elektrophysik-mikrotest-magnetic-coating-thickness-gauge-5649.jpg https://www.abqindustrial.net/store/images/additional/elektrophysik-mikrotest-magnetic-coating-thickness-gauge-5650.jpg 568 64 /store/images/warranty-1-year-new.png