https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Tue, 09 Jun 2026 23:12:34 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-og202-og212-dual-measure-tooke-gage-p-544.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=544 Tooke Gage - Micro-Metrics OG202 / OG212 Dual-MeasureDual-Measure scopeAssists in measuring brittleness and adhesion of coatings and materialsTooke Gages meet ASTM D4138-82 and ISO 2808The Micro-Metrics OG202 / OG212 Dual-Measure Tooke Gage is a precision tool for inspection and dry-film thickness measurement (in accordance with ASTM D4138) of single or multiple coats on any substrate, and for microscopic observation and measurement of substrate and film defects. Kit Options The machined aluminum Tooke Gage comes ready for use in a polycarbonate plastic carrying case with two spare batteries, a spare LED bulb, a indelible marking pen, a hex wrench, and a technical data sheet.Standard cutting tip configuration is 1X, 2X, and 10X.An optional 5X cutting tip is available.Any configuration of tips may be requested (for example, three 10X tips; or a 1X, 2X, and 5X).Click image to enlargeYou may also order (for a lower price) a Gage with only a single cutting tip and two blank tips (spacers). Features Dual-Measure scope, with 1 mil per hashmark space above the line and 20 microns per hashmark space below the line scale.Measures thickness of coatings applied to wood, plastic, cement, glass, ceramics, mirror backings, metal, etc.Assists in measuring brittleness and adhesion of coatings and materials.Both the OG212 and OG214 are supplied with 1X, 2X, and 10X cutting tips installed in the Gage body. An optional 5X cutting tip is available.Gauges come in a rugged plastic carrying case with cutting tip wrench, indelible marker, spare LED bulb, and spare batteries Click image to enlarge Click image to enlarge Click image to enlarge The Gage in standard configuration mounts 1X, 2X, and 10X cutting tips. (An optional 5X tip is available.) The Gage can be ordered in any desired configuration, such as with three tips of the same size. You may also order (for a lower price) a Gage with only a single cutting tip and two blank tips (spacers).Direct measurement of total dry-film coating thickness and thickness of individual coats of paint is a unique capability of the Tooke Paint Inspection Gage. Thus, in addition to routine use, it often serves as a “referee” instrument to calibrate indirect or non-destructive thickness measuring instruments.Note: Each microscope is validated before sale against a certified Gage block traceable to the National Institute of Standards & Technology (NIST). An OEM calibration certificate is available for an additional fee Specifications MaterialMachined anodized aluminum bodyOverall dimensions4.5" x 3.5" x1" | 11.4cm x 8.9cm x 2.5cmMicroscope50 - power, 45 - degree, illuminated with Dual-Measure reticlePowerTwo 15V AA drycells in the gauge, plus two sparesLampLED 222 bulb plus a spare bulbCutting tipsPrecision-ground tungsten-carbide cutting tips: 1X, 2X, and 10X (or as desired)Shipping Weight~2 pounds (0.9 kg) Applications The Tooke Gage has been used to assess sandblast cleaning work, to measure plating and paint thickness on ceramics, metal, wood, and concrete, and even to measure protective backing thickness on mirrors. It is virtually the only tool for measuring paint on plastics. The quality of the incision in the film discloses much about the characteristics of the brittleness and adhesion of the material.Other uses include assessment of substrate conditions and coating adhesion, and observation of microscopic cracking, tendency for brittleness, cratering, or other microscopic film symptoms. Construction The aluminum Gage body contains an illuminated microscope and mounts three tungsten-carbide cutting tips (that incise the “V-groove” for measuring) on the narrow side. Two guide studs project from the body on the same side as the cutting tips. The tripod thus formed by the three legs (guide studs and cutting tip) provides precise alignment of the tool with the surface to be grooved. A lanyard with keeper looped through the body secures the instrument to the inspector's wrist. The entire unit is designed for convenience and completeness in field inspection tasks.Click image to enlargeTwo cutting tip holders are availableClick image to enlarge Operation A special cutting tool (the cutting tip) that is integral to the Gage is used to incise a small precision V-groove through the paint film and into the substrate.Ensure the operable tip and both guide studs are in solid contact when incising the V-groove with the anodized OG212 Tooke GageClick image to enlargeIncorrectly incising the V-groove with the anodized OG212 Tooke Gage. Notice the closer guide stud is not touching the surface.Click image to enlargeTooke Gage cutting tips are precision-ground from tungsten-carbide blanks.Click image to enlargeThe Gage in standard configuration mounts 1X, 2X, and 10X cutting tips. (An optional 5X tip is available.) The Gage can be ordered in any desired configuration, such as with three tips of the same size. You may also order (for a lower price) a Gage with only a single cutting tip and two blank tips (spacers).Diagram of cutting tip incisionsClick image to enlargeThe tip slot is marked for the standard tip arrangement (in the anodized body)Click image to enlargeClose-up of the 1X tip extended for use and two blank tips; mounted in a (very) old-style Gage bodyClick image to enlarge Principle: using the Dual-Measure microscope Measurement with a Tooke Gage is a function of the cutting tip face-angle and NOT of the microscope.One of the best things about the new Dual-Measure scopes is the return to an easy calculation system related to the cutting tip face-angle. As described in the measuring demo, and shown in the drawings in the Geometry section, below, count the hashmarks spaces for each layer of coating, and then calculate the coating depth using the the Dual-Measure scope conversion shown below.Conversion for the Dual-Measure scope:Cutting tip used:Face RatioEach counted hash measures:1X1 : 11 mil2X1 : 21/2 mil10X1 : 101/10 milView through the new Dual-Measure reticle: the metric scale is marked in 20μm per hashmark.Click image to enlargeThe discontinued universal microscope reticle is marked in 50μm per hash. For universal scope conversions, see the Reticles section below.Click image to enlarge The geometry of the Tooke Gage incision The easiest example of the process is demonstrated using the 1X cutting tip. In essence, you are cutting a triangle into your coating by incising the hypotenuse of a right-angle triangle. With the 45° precision-ground face of the 1X tip, you're cutting an equi-lateral triangle: 1X tip has a 1 : 1 ratio. (See the 1X tip drawing below.) That is, by counting the hashmarks that define the horizontal triangle-side at the “bottom” of the triangle (and your view through the microscope), you are measuring across the ‘cut-width.' The 1:1 ratio means your cut-width equals that is your coating depth. With the 10X tip, you're drawing a right-angle triangle, and one-tenth (1/10) the number of hashmarks across the cut-width is your coating depth. (See 10X figure below.)Cutting tip diagram and ratio of cut-width : coating-depth Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge A Measuring DemonstrationThe “zero-line” of the Dual-Measure reticle at right is not lined up with the edge of a coating (nor does it need to be, as any hashmark will do). The zero-line is off onto the brown top-coat, well beyond the edge of the incision. Line A is on the right edge of the (white-appearing) substrate. (The incision into the substrate, on the right past A, reflects silver in the photo.)Line B marks the bottom of the blue primer coating. Begin measuring(leftward) at Line B.Line C is the top of the primer and the bottom of a brown top coat.Line D is the end of the incision at the top coat.Click image to enlarge If needed, the top of the top-coat can be made easier to see using the black marker provided with the Tooke Gage. In this photo, the darker brown of the top is easy enough to differentiate from the lighter tan of the interior of the top coat.Thus, in the demonstration photo above, the thickness measured for each different tip face-angle will be:Above the line on the Dual-Measure or the old-style scope (U.S. standard-units: 1 mil per hash)Coating1mil /hashmark space1× tip, mils2× tip, mils5× tip, mils10× tip, milsA-to-B substrate top (do NOT measure)11.25 hashmark spaces11.255.62.251.1B-to-C Blue primer3.75  hashmark spaces3.751.90.750.4C-to-D Tan top-coat5 hashmark spaces52.510.5Below the line on the Dual-Measure or the old-style scope (metric units: 20 µm per hash)Coating20 µm /hashmark space1× tip, µm2× tip, µm5× tip, µm10× tip, µmA-to-B substrate top (do NOT measure)15 hashmark spaces3001506030B-to-C Blue primer4  hashmark spaces8040168C-to-D Tan top-coat7 hashmark spaces140702814Precision and calibration: Note: Every microscope is validated before sale against a certified Gage blocks traceable to the National Institute of Standards & Technology (NIST). An OEM calibration certificate can be ordered (for cost) with your new Gage or your Gage can be sent in for calibration and certification. Call or email for details. Replacement tungsten-carbide cutting tips Available in 1X (45°), 2X (26° 6') and 10X (5° 7') configurations. An optional 5X tip (11° 18') and blank unfaced tips are also available. (The blank tips provides lateral stability for the operable tip, if only one faced tip is used.)Click image to enlarge Related Products Micro-Metrics CTH01 Cutting Tip HolderThe Cutting Tip Holder, at a little under two inches long, allows easy use of a cutting tip without having to manipulate the Tooke® Paint Inspection Gage to make the incision and then manipulate the Gage again to view the incision through the microscope. Click image for more info Micro-Metrics CTH02 Cutting Tip HolderThe CTH02 (two-tip) Cutting Tip Holder allows easy use of carbide cutting tips without having to manipulate the Tooke® Paint Inspection Gage to make the incision and then manipulate the Gage again to view the incision through the microscope. Click image for more info Downloads Micro-Metrics OG202 / OG212 Dual-Measure Tooke Gage - Data SheetMicro-Metrics OG202 / OG212 Dual-Measure Tooke Gage - Dual-Measure Scope Swap Program Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-og202-og212-dual-measure-tooke-gage-p-544.html Thu, 07 Aug 2025 19:38:56 +0000 USD 544 Micro-Metrics 855 OG202 https://www.abqindustrial.net/store/images/products/micro-metrics-og212-took-paint-inspection-gauge.jpg https://www.abqindustrial.net/store/images/additional/micro-metrics-og202-og212-tooke-gauge-ii-6276.jpg https://www.abqindustrial.net/store/images/additional/micro-metrics-og202-og212-tooke-gauge-ii-6277.jpg https://www.abqindustrial.net/store/images/additional/micro-metrics-og202-og212-tooke-gauge-ii-6278.jpg https://www.abqindustrial.net/store/images/additional/micro-metrics-og202-og212-tooke-gauge-ii-6279.jpg 544 145 /store/images/warranty-1-year-new.png