https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm300-high-capacity-motorized-test-stand-p-218.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=218 Two-line LCD with UP, DOWN, STOP, and emergency stop buttons and soft keysMounting holes for bench mountingRemovable base plate with 25 #10-32 threaded holes for fixture mountingThe ESM300 Motorized Force Measurement Test Stand is a versatile and precise testing solution for most compression and tensile testing applications up to 300 lb. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.The ESM controller features an LCD display with dedicated UP, DOWN, STOP, and emergency stop buttons and soft keys as well as Selectable speed units (in/min & mm/min). An Emergency stop button is conveniently located for safe operation. Password lockout prevents unwanted changes to test stand configuration. Short push and release of buttons produce maintained crosshead motion until either of the buttons, or STOP button, is pushed.ESM300 Controller Features Two-line LCD with UP, DOWN, STOP, and emergency stop buttons and soft keysMounting holes for bench mountingRemovable base plate with 25 #10-32 threaded holes for fixture mountingModular design (test frame may be separated from controller and used remotely)Stepper motor-driven, produces 0% speed variation with increasing loadInternal steel stiffening plates significantly reduce column bendingSimplified low-maintenance drivetrainSelectable speed units of measurement (in/min and mm/min)Configurable password, for preventing unwanted changes to test parametersIntegrated travel limit switches Optional Controller Features Complete Options Package - $650.00Includes all the options listed belowAny of the below option packages may be purchased at time of order or may be added in the field at a later date. Features are field-enabled by entering an activation code. Read the ESM300 >>> user's guide for details on this unique capability. ESM300 test stands are shipped with all features enabled for a limited trial period.Auto-return PackageThe crosshead moves to one limit switch or force set point (applicable to Series BG gauges only), stops, and reverses direction to the other limit switch or set point.Cycling / Dwell Time PackageCycling mode allows the crosshead to move up and down between limit switches or force set points (Series BG gauges only). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 99,999 seconds, in 0.1 second intervals, for which the crosshead pauses between cycles. Requires limit switch kit.Button Operation PackageExpands button operation to three operational modes: Maintained (standard): a short push and release produces maintained motion, Momentary: crosshead moves only while the button is pressed, and Auto: short push and release produces maintained motion, while holding the button will produce crosshead movement, until released.Independent UP and DOWN speedsConfigurable speeds for up and down directionsExtended Speed Range Package - lowExtends the speed range to 0.02 - 13 in/minExtended Speed Range Package - highExtends the speed range to 0.5 - 45 in/min Complete Speed Range PackageExtends the speed range to 0.02 - 45 in/min Hardware Options Accessories A wide range of force gauges and gripping fixturesDigital travel display6" [152 mm] travel, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collectionOverload protection moduleProtects the force gauge against accidental overloads during motorized tests. Adjustable from 20 - 110% of gauge's capacity. Compatible with all Mark-10 force gauges with outputs.Set point cableStops test stand travel at programmable high and low set points for tension and compression forces, programmed on a compatible force gauge. Column extensionsAvailable in 6", 12", 24", and custom lengths PC Connection Guide Dimensions Related Products G104590° Peel TesterMaintains 90° angle between the table and the direction of pullMaximum table travel: 8.2 in (210 mm) BGDigital Force GaugeRS-232, Mitutoyo and analog outputsSelectable units of measurement Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm300-high-capacity-motorized-test-stand-p-218.html Fri, 01 Aug 2025 20:12:52 +0000 USD 218 Mark-10 1000 ESM300 https://www.abqindustrial.net/store/images/ESM300.jpg 218 0 images/manufacturers_warranty/7/warranty-3-new.png