https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Tue, 05 May 2026 17:48:34 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/wire-terminal-pull-testers-c-101_11/checkline-wtt-110-wire-terminal-tester-p-213.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=213 The WTT-110 has been replaced by the new and improved WT3-201. Checkline WTT-110 Wire Terminal TesterRange: 0-110 lbs / 0-50 Kg / 0-500N Measures in "Continuous" or "Peak" mode Checkline WTT-110 Wire Terminal TesterMeasuring Range 0-50 Kg / 0-110lbs / 0-500 N(User Selected) Accurately measure the pull or “pull-off” force on most soldered or solder-less wire terminals, crimped connectors and similar wire terminations. The WTT-110 is an easy to use all-in-one, single-range solution suitable for a vast majority of terminal testing applications eliminating the need to purchase any additional grips, fixtures or accessories. Suitable for wires AWG 30 to AWG 8 (diameters from 0.010" to 0.130"). PricingWTT-110: $1,995.00WTT-110RS: $2,095.00  Features   Precision strain gauge sensing provides a resolution of 1/5000 with an accuracy of 0.5%  Display force values in “peak-hold” or “continuous” measurement mode Operates from AC power or built-in rechargeable battery via supplied adapter/ charger Fabricated from steel and stainless steel, machined to the highest tolerances Model WTT-110RS includes RS-232 and analog outputs for external data recording Photo Gallery - click any photo to enlarge      Operating Procedure To operate, simply follow these steps:1. Select the appropriately sized slot in the Wire Terminal Fixture and rotate to the front position2. Insert the terminal and wire so that it is secured on the back-side of the slot3. Route the wire so that it passes between the lever and the lever clamp4. Select Peak-Hold or Continuous Measure mode using the PEAK key5. Press the ZERO key to perform tare function6. Rotate the lever clockwise, which clamps the wire and begins creating a pull force on the terminal7. Read current force and breaking force on the digital display Calibration Verification Procedure Calibration for all WTT-110 models can easily be verified or re-certified with a single 50 Kg hook weight as described below: 1. Remove the lever by unscrewing it in a counter-clockwise direction and move the Wire Clamp assembly out from the path of the hanging sample. 2. Position the WTT-110 in a vertical position at the edge of a strong bench or desk (refer to photo). Be sure to secure it so it can not topple over when the weight is attached. 3. Using a heavy-duty monofilament (fishing line), wire or similar, suspend a known weight from one of the teeth on the wire terminal fixture by hooking a loop of the material over the selected tooth. Complete calibration instructions: Checkline WTT-110 Calibration Manual - Click here to download  Dimensions  Complete Kit  The WTT-110 is supplied as a Complete kit that includes; main instrument table, separate hand lever with ball end, 9VDC battery charger 100...240VDC (50...60Hz) with Euro/US/UK plug adaptor, operating instructions & NIST certificate. WTT-110RS model also includes connection cable for RS232C (not shown) Specifications Measuring Range0-50 Kg / 0-110 lbs / 0-500N(units selected via keypad) Resolution0.01 Kg / 0.1 lbs / 0.1 N  Terminal Adapter Slot width (mm)0.5, 0.8, 1.0, 1.4, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0 Accuracy±0.5% F.S. or better  Operating ModeContinuous:Displays actual value in Kg, lbs pr NPeak-Hold:Displays peak value in Kg, lbs pr N Wire DiameterSAE AS7928 II: AWG 8...30IEC 60352-2: Cross section 0.05...10mm²Maximum: 0.236" (6mm) Overload200% Full Scale (LCD indicator at 120%)  DisplayLCD, 4-1/2 digit, 12mm high  MemoryPeak Value  Power SupplyInternal NiCd battery, supplied with AC adapter/charger (115 V/60Hz) Interface*WTT-110RS OnlyRS-232C - 2400 KB / 8 / N / 1 / None (selectable baud rate) Temp. RangeOperating: 32 to 104° F (0 to 40° C)Storage: -4 to 140° F (-20 to 60° C) Weight30.8 lbs (14 Kg) (Shipping weight 37lbs) Dimensions14.2" x 6.3" 2.6" (360 x 160 65mm)  MaterialAnodized aluminum, steel and stainless steel  Reverse DisplayWith the WTT-110 powered off, hold down "UNITS" key and press "ON/OFF" key, release after unit powers on  Download  FMI Connect Software  Click here to download PDF Data Sheet  Click here to download PDF Calibration Instructions  Click here to download PDF Instruction Manual  Click here to download    Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/wire-terminal-pull-testers-c-101_11/checkline-wtt-110-wire-terminal-tester-p-213.html Tue, 17 Feb 2026 20:39:39 +0000 USD 213 Checkline 997 WTT-110 https://www.abqindustrial.net/store/images/products/force_gauges/WTT-110/main_small.jpg 213