Albuquerque Industrial : RSS Product Feed :: Imada Z2 Digital Force Gage https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 Imada Z2 Digital Force Gage https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/imada-z2-digital-force-gage-p-174.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=174 The Z2 has been replaced by the ZT SeriesProgrammable Digital Force Gauge with Output± 0.2%7 Ranges up to 220 lbsRS-232C, Digimatic and Analog outputsReversible display7 Ranges up to 220lbsThe new Check-Line model Z2 is a high performance, digital force gauge which offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.Store up to 1000 values in memory, which can be transmitted using the Digimatic or serial output ports. Use the real time mode to display load transients, or the peak mode to capture the peak force achieved during a test. Selectable measuring units of lbf, kgf, or Newtons. Connect a Z2 force gauge with an MX Series test stand and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z2 force gauge, or maintain the force between the Z2 High and Low setpoints. Force control is ideal for fatigue or non-destructive testing. Photo Gallery Features Ergonomically-designed, rugged die-cast aluminum housing"Zero Set" to zero the gauge in all operating positions (Tare)Operates on rechargeable NiCd batteries or AC adapterOverload protection 200 % full scaleFor hand-held use or mounting on test standsDisplay can be reversed for inverted use: e.g. on teststands Output signals (RS 232 C, analog and Mitutoyo Digimatic)Quick display update rate of 20 times/sUser selectable units: N, kgf (gf) and lb (oz)Easy to useSelectable ModesReal Time (to display load transients)Peak Modes (to capture the peak force achieved during a test)Supplied with NIST Calibration certificateISO/IEC 17025 Long-form Certificate & Test Data is optionally available2 Year Warranty Force Ranges ModelCapacityResolutionZ2-0.47.00 oz200 g2 N0.01 oz0.1 g0.001 NZ2-118 oz500 g5 N0.01 oz0.1 g0.001 NZ2-44.4 lb2 Kg20 N0.001 lb 0.001 Kg0.01 NZ2-1111 lb5 Kg50 N0.01 lb0.001 kg0.01 NZ2-4444 lb20 Kg200 N0.01 lb0.01 Kg0.1 NZ2-110110 lb50 Kg500 N0.1 lb0.01 kg0.1 NZ2-220220 lb100 Kg1000 N0.1 lb0.1 Kg0.1 N Dimensions Standard Attachments Special Attachments Complete Kit All Z2 gauges are sold as complete kits that include the gauge, hard plastic carrying case, AC adapter/charger, and attachments (flat head, conical, chisel, notched, small hook, large hook, Y-fork, and extension rod). Built-in NiCad rechargeable batteries. Specifications Displacement0.2 mm Accuracy± 0.2% Full scale ± 1 digit Selectable unitsN, Kgf (gf), lb (oz) Display4 digit, 12 mm high Overload capacity200% Full scale, display flashes beyond 105% full scale Zero adjustment (Tare)10% Full scale A/D Converter14 bit Output signalRS 232 C (8, 1, N, 2400),analog ± 1 V DC,Mitutoyo Digimatic Displacement at full scale capacity0.10 mm Temperature range32° to 100°F (0° to 40°C) Air humidity85% RH, max. Low battery indicatorDisplay flashes when battery is low Power supplyRechargeable NiCd battery pack and/or 230 AC Adapter Housing dimension215 x 65 x 51 mm (L x W x H) Weight, net (gross)approx. 430 g (1300 g) Warranty2 Years  Related Products SW-1Data Acquisition Software for Force Gauges & Torque GaugesFull SPC and graphing capabilitiesAutomates your data collectionProvides a running log of all measurements along with a chart of the data as well as statistical information Click image for more info HV-110Manual Test StandHand wheel design provides a high degree of precise controlOptional digital distance meter Click image for more info MX-110Motorized Vertical Test StandForce Controlled operation with Z2 and ZP force gaugesog, Single Cycle, Continuous Cycle, Force Control Click image for more info MESURgaugeMesurgauge Load & Travel Analysis SoftwareSends data from a force or torque gauge and travel display to a PC for further analysis Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/imada-z2-digital-force-gage-p-174.html Mon, 07 Oct 2024 01:16:26 +0000 USD 174 Imada 997 Z2 https://www.abqindustrial.net/store/images/products/z2.jpg 174 The new Check-Line model Z2 Digital Force Gage is a high performance force gauge which offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint. Store up to 1000 values in memory, which can be transmitted using the Digimatic or serial output ports. Use the real time mode to display load transients, or the peak mode to capture the peak force achieved during a test. Selectable measuring units of lbf, kgf, or Newtons.

Connect a Z2 force gauge with an MX Series test stand and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z2 force gauge, or maintain the force between the Z2 High and Low setpoints. Force control is ideal for fatigue or non-destructive testing.


]]> 3 /store/images/warranty-1-year-new.png