https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Tue, 09 Jun 2026 23:12:34 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/cedar-di-12-4-yield-digital-torque-tester-p-139.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=139 The DI-12-4 has been replaced by the DI-12-SLCedar DI-12-4 Yield Digital Torque TesterAvailable in: lbf-in, ozf-in, Kgf-cm, N-cm and N-m (specify units when ordering)DI-12 motorized torque tester is designed to find the actual yield tightening torque value for specific thread joints which consist of a variety of thread types, multi-layered material, hole sizes, etc.The yield value is the point at which the torque angle is no longer linear. Once the yield tightening torque value is found, one can easily determine the proper tightening torque value. DI-12 also captures the difficult-to-detect first peak dip in actual tightening torque of small screws. DI-12 provides a steady slow speed to capture the very small first peak dip and stops automatically to avoid over tightening. Torque data can be continuously output via RS-232 enabling you to display a torque profile showing, peak down, yield, and destructive strength torque using data acquisition software. Features Peak, Real Time and Yield measuring modes (selectable)RS-232C outputBoth CW and CCW Operation Force Ranges ModelRangeDI-12-SL40.30 – 35.00 lbf-inDI-12-SL4oz3.0 – 560.0 ozf-inDI-12-SL4kg0.30 – 40.00 kgf-cmDI-12-SL4cN3.0 – 400.0 N-cmDI-12-SL4N0.030 – 4.000 N-m Specifications Auccracy±1% F.S., 1LSD Display4 digit LCD Display OperationBoth CW and CCW motorized rotation Measurement ModesP-P: Displays PEAK Torque value that will not change until a higher value is measured.T-R: Displays TRANSIENT torque values.RG: Determines peak down and yield torque (CW only)If a peak down torque value is detected, the green indicator will light, and tester rotation will stop automatically. Test Start ValueStart of RG Mode can be set in 0.001 N-m increments. RS-232 OutputContinuous (9600 baud) output in PP and RG measuring modes. Auto-power-offAfter 5 minutes of non-use. Drive1/4" Hex Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/cedar-di-12-4-yield-digital-torque-tester-p-139.html Tue, 04 Feb 2025 22:26:34 +0000 USD 139 Imada 1000 DI-12-4 https://www.abqindustrial.net/store/images/products/DI-12-4.jpg 139 The DI-12-4 Yield Digital Torque Tester is designed to find the actual yield tightening torque value for specific thread joints which consist of a variety of thread types, multi-layered material, hole sizes, etc. The yield value is the point at which the torque angle is no longer linear. Once the yield tightening torque value is found, one can easily determine the proper tightening torque value. DI-12 also captures the difficult-to-detect first peak dip in actual tightening torque of small screws. DI-12 provides a steady slow speed to capture the very small first peak dip and stops automatically to avoid over tightening. Torque data can be continuously output via RS-232 enabling you to display a torque profile showing, peak down, yield, and destructive strength torque using data acquisition software. ]]> 0 /store/images/warranty-1-year-new.png