https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Wed, 10 Jun 2026 20:52:02 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/imada-cedar-nts-6-motorized-rotating-friction-torque-tester-p-138.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=138 aImada Cedar NTS-6 Motorized Rotating Friction Torque Tester9 Ranges up to 45.00 lb-inThe Imada Cedar NTS-6 is a motorized rotating torque tester that measures rotating dynamic torque while turning the sample.Check the rotating torque, smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc.Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software. Features Peak, Real Time and Continuous Output measuring modes (selectable)Programmable high/low setpoints for Go/No go testingRS-232C output in Both CW and CCW operationThe available engineering units of measurement on the NTS-6 Rotating Torque Testers are oz-in, lb-in, N-m, N-cm and Kgf-cm. Specifications Accuracy±1% F.S., 1LSD Measuring Range(at the time of Track)S1/oz: 3.0~100mNmS2/oz: 3.0~200mNmS5/oz: 0.030~0.5Nm Max. RotationalSpeed(no-load)S1/oz: 85 rpmS2/oz: 30 rpmS5/oz: 13 rpmS10: 18 rpmS20: 18 rpmS50: 5 rpmDisplay4 digit LCD display OperationBoth CW and CCW motorized rotation Measuring modesPP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.GO: Real Time Mode displays TRANSIENT torque values.RG: Output Torque Data every 1/100 seconds. Measurement start timeCan be set up to 1 second in 0.1 second increments. Measuring timeTime can be programmed between 1 and 20 seconds. Go/No go testingProgrammable High and Low values; Green lamp (OK solid, NG blinking). External input/outputSignal output (open collector): Go and No GoData output: RS-232C (9600 baud) External start switch input Data memory400 data Power supplyAC100V~240V Bit size4mm diameter Force Ranges ModelCapacityNTS-6-S10.030 - 0.900 lb-inNTS-6-S20.030 - 1.740 lb-inNTS-6-S50.30 - 4.50 lb-inNTS-6-S100.30 - 9.00 lb-inNTS-S200.30 - 17.40 lb-inNTS-S500.30 - 45.00 lb-inNTS-S1oz0.30 - 14.00 oz-inNTS-S2oz0.30 - 28.00 oz-inNTS-S5oz3.00 - 70.00 oz-in Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/imada-cedar-nts-6-motorized-rotating-friction-torque-tester-p-138.html Sun, 08 Mar 2026 20:16:06 +0000 USD 138 Imada 1000 NTS https://www.abqindustrial.net/store/images/products/NTS.jpg https://www.abqindustrial.net/store/images/additional/cedar-nts-6-rotating-torque-analyzer-3122.jpg https://www.abqindustrial.net/store/images/additional/cedar-nts-6-rotating-torque-analyzer-3123.jpg https://www.abqindustrial.net/store/images/additional/cedar-nts-6-rotating-torque-analyzer-3124.jpg 138 0 /store/images/warranty-1-year-new.png