https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2024 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Tue, 06 Aug 2024 18:33:14 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/teste-c-117/teste-dakota-thickness-gauge-transducers-corrosion-dual-elem-c-117_184/dakota-thickness-gauge-transducers-corrosion-dual-element-p-2201.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2201 ]]>Dual element transducers are designed with two crystals in one case The crystals are mounted at slight angles towards each other. Enabling better near surface focusing Twin Crytal transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass The Dakota range of Dual Element Transducers is designed to ultrasonically measure material thickness when access is only available to one side of the material under inspection. Dual element transducers are designed with two crystals in one case, separated by an acoustic barrier. One crystal transmits a signal and receives on another crystal, this improves signal measuring speeds. The crystals are mounted at slight angles towards each other. Enabling better near surface focusing. Twin Crytal transducers are ideal for inspecting metal substrates but can also measure thicknesses of other materials, such as plastic, composites or fibreglass. Specifications 1Damping: S - Standard Undamped Transducer CT - Damped Coating Thickness Transducer H - Highly Damped Transducer The maximum temperature range of a Standard Transducer is 126°C (260°F) The maximum temperature range of a High Temperature Transducer is 335°C (635°F) Albuquerque Industrial https://www.abqindustrial.net/store/teste-c-117/teste-dakota-thickness-gauge-transducers-corrosion-dual-elem-c-117_184/dakota-thickness-gauge-transducers-corrosion-dual-element-p-2201.html Tue, 06 Aug 2024 18:33:14 +0000 USD 2201 Dakota Ultrasonics 1000 DTGTCDE https://www.abqindustrial.net/store/images/dakota-thickness-gauge-transducers-corrosion-dual-element.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-j-200-analog-dial-thickness-gauge-p-2197.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2197 ]]>Measuring Range: 0 - 10 mm / 0 - 0.40 inch Jaw Depth: 200 mm / 7.87 inch Resolution: 0.01 mm / 0.0004 inch The Hans-Schmidt J-200 Analog Dial Thickness Gauge features an easy to read analog display along with the high accuracy. The Hans-Schmidt J-200 Analog Dial Thickness Gauge model is available with 5 different feelers, which can be found below. Measurement is done by a spring force. Opening by lifting device (lever) - self closing. The Hans-Schmidt J-200 Analog Dial Thickness Gauge is ideal for determine the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, etc. Kit Contents Hans-Schmidt J-200 Analog Dial Thickness Gauge Transport Packing Case Specifications Resolution 0.01 mm (0.0004 inch) Measuring Range 10 mm (0.40 inch) Depth Of Jaw 200 mm (7.87 inch) Scale Diameter 54 mm (2.1 inch) Measuring Pressure 1.5 N (Optional: 1.2 N or 3 N) Feeler Shape Select Feeler "A", "B", "C", "D" or "E" Measuring Principle Self closing Weight, net (gross) 2.5 Lbs (1100 g) Feeler Shape To order, please indicate the desired feeler, e.g. J-200-B for gauge with feeler >B Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-j-200-analog-dial-thickness-gauge-p-2197.html Thu, 25 Jul 2024 18:27:39 +0000 USD 2197 Hans-Schmidt 1000 J-200 https://www.abqindustrial.net/store/images/hans-schmidt-j-200-analog-dial-thickness-gauge.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-fd-50-digital-thickness-gauge-p-2196.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2196 ]]>Operating by lifting device - self closing Resolution 0.001 mm (0.00005 inch) Easy to read LCD Display The Hans-Schmidt FD-50 Digital Thickness Gauge series features an easy-to-read LCD display with the ability to display thickness in mm or inches. The Hans-Schmidt FD-50 Digital Thickness Gauge model is available with 5 different feelers, which can be found below. A self-closing mechanism provides accurate and repeatable measurements Features Operating by lifting device - self closing Resolution 0.001 mm (0.00005 inch) Easy to read LCD Display User selectable units mm and inch USB Data Output (requires optional cable, DCPRMD-USB) Dial gauge: Sylvac S 229 NIST-Traceable Calibration Certificate optional Specifications Resolution 0.001 mm / 0.0001 inch Measuring range 0 - 12.5 mm / 0.4 inch Depth of jaw 50 mm Display LCD 6 digit, 8.5 mm high Measuring principle Capacitive (Sylvac) Measuring pressure < 1.4 N Feeler shape a,b,c,d or e Lifting device Operating by lifting device - self closing Data output USB, RS 232, optical coupling Power supply Battery 3 V Lithium, CR 2032 Temperature range 10 - 45°C Weight, net 300 g Feeler Shape To order, please indicate the desired feeler, e.g. 500-FD-B for gauge with feeler >b Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-fd-50-digital-thickness-gauge-p-2196.html Thu, 25 Jul 2024 18:31:13 +0000 USD 2196 Hans-Schmidt 1000 FD-50 https://www.abqindustrial.net/store/images/hans-schmidt-fd-50-digital-thickness-gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-8000-series-precision-coating-thickness-gauge-p-2195.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2195 ]]>Resolution of up to 0.01 mils (1 micron) User-selected units of inch (mils) or microns (µm) Auto substrate recognition (Ferrous or Non-Ferrous) ElektroPhysik DCF-8000 - Ferrous Only Model ElektroPhysik DCFN-8000 - Combination Ferrous & Non-Ferrous Model Range Ferrous: 0-120 mils 0-3000um Range Ferrous: 0-80 mils 0-2000um   Non-Ferrous: 0-80 mils 0-2000um The ElektroPhysik 8000 Series Precision Coating Thickness Gauge is provides fast, non-destructive, accurate coating measurements on steel and non-ferrous metals. Designed to accommodate a wide range of laboratory and field applications and manufactured to international quality standards, the ElektroPhysik 8000 Series Precision Coating Thickness Gauge will provide years of trouble-free use. The ElektroPhysik 8000 Series Precision Coating Thickness Gauge features a fixed external probe on a cable for the measurement of all non-magnetic coatings on steel (Fe) and all insulating coatings (non-conductive & non-magnetic) on non-ferrous metals (nFe). It is specially designed to work in rough environments and on abrasive surfaces, and plasma spray-coated surfaces. The industry-proven one-pole sensor is made of a wear and tear-resistant carbide material to ensure a virtually unlimited life cycle under normal use. The gauge body is supplied in a rubber protective sleeve, providing enhanced physical protection. A backlit Graphic LCD, built-inmemory with statistics and USB output combined with a simple menu system make these gauges easy to operate, providing high accuracy, resolution, repeatability and functionality. Kit Contents ElektroPhysik 8000 Series Precision Coating Thickness Gauge Probe Zero Calibration Standard(s) (bare metal plate) Calibration standard(s) Calibration foils / shims Operating instructions Soft pouch 2x AA Batteries Features Resolution of up to 0.01 mils (1 micron) User-selected units of inch (mils) or microns (µm) Auto substrate recognition (Ferrous or Non-Ferrous) Rugged External Probe is supplied with a 1-meter length cable Probe with wear-resistant carbide metal tip Automatic identification of the substrate material Statistical evaluation of readings (number of readings, maximum, minimum, mean value & standard deviation) User-selected one or two-point calibration Built-in Memory for 10,000 values with USB Output Can be set for up to 10 batches with 1000 readings per batch Upper & Lower Limits with Audible & Visual Indication of Out of Tolerance Measurements Works Basic Calibration Certification (without data) is incuded NIST Traceable Calibration Certificate optionally available at additional cost Warranty 1-Year, Made in Germany Specifications Measuring Range Model F (steel)0 - 3000 μm / 120 milsModel FN (dual sensor)F: 0 - 3000 μm / 120 milsN: 0 - 2000 μm / 80 mils Measuring Uncertainty ± (2 % of reading + 2 μm)± (2 % of reading + 0.08 mils) Resolution (mils) 0.01 mils (0.00… 0.99 mils)0.02 mils (1.00… 4.98 mils)0.05 mils (5.00… 9.95 mils)0.1 mils (10.0… 49.9 mils)0.2 mils (50.0... 99.8 mils)0.5 mils (100.0... 120.0 ) Resolution (microns) 1 µm (0…199 µm)2 µm (200…498 µm)5 µm (500…995 µm)10 µm (1000… 2000 µm) Minimum curvature radius convex 5 mm / 0.2" Minimum curvature radius concave 25 mm / 1" Minimum measuring area Ø 20 mm / 0.8" Minimum base thickness: 0.5 mm / 20 mils (F) / 50 μm / 2 mils (N) Display 128 x 64 Dots graphics display, backlit Measuring units μm – mils, user selectable Calibration Standard, 1-point and 2-point calibration Statistics Mean value, standard deviation, number of readings, minimum and maximum (Calculated from 1000 readings, max) Interface USB Max Batches 10 Data In Each Batch 1000 readings (max) Power 2 AA-Batteries (alkaline) Dimensions Housing: 130 mm × 73 mm ×25 mm / 5.1" x 2.9" x 1.0"Sensor: Ø 15 mm x 62 mm / Ø 0.60" x 2.44" Weight 162 grams (Including batteries) Ambient temperature Gauge: 0 to 50 °C / 32 ° to 122 °FSensor: -10 ° to 70 °C / 14 ° to 158 °F Warranty 1 Year Downloads ElektroPhysik 8000 Series Precision Coating Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-8000-series-precision-coating-thickness-gauge-p-2195.html Thu, 04 Jul 2024 16:14:12 +0000 USD 2195 ElektroPhysik 1000 DCF-8000 https://www.abqindustrial.net/store/images/elektrophysik-8000-series-precision-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-sy-durometer-stand-lever-operated-durometer-operating-stand-p-2194.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2194 ]]>Imada SY Durometer Stand Lever-Operated Durometer Operating Stand Durometer Sold Separately Simple lever operation Auto Contact enables the durometer to make full, even contact Pneumatic damper maintains consistent test speed Imada SY-L (Shore A, B, E, O, OO, Asker C) Imada SY-H (Shore C, D, DO) Imada SY Durometer Stand Lever-Operated Durometer Operating Stand eliminates the speed and load variables which occur when hand-testing samples with a durometer. The load and test speed the durometer applies to the sample are kept constant with a standard weight and pneumatic damper. Multiple scales can be tested using the appropriate durometer, coupling, weight and damper setting. Features Simple lever operation Auto Contact enables the durometer to make full, even contact. Pneumatic damper maintains consistent test speed Handwheel enables easy height adjustment Heavy-duty metal construction Accommodates multiple durometer scales Operation Use the handwheel to adjust clearance from the sample. Lightly pull the lever forward to start the durometer moving down. Auto contact enables the durometer to align to the sample to make full, even contact. Durometers NOT included Scales Model Durometer Scales Contact Adapter Weight SY-L Shore A, Shore B, Asker C, Shore O, Shore OO SA-L - SH-H Shore C, Shore D, Shore DO SA-H WH-5k Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-sy-durometer-stand-lever-operated-durometer-operating-stand-p-2194.html Wed, 24 Jul 2024 18:44:48 +0000 USD 2194 Imada 1000 SY https://www.abqindustrial.net/store/images/imada-sy-durometer-stand.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-yms-motorized-durometer-test-stand-p-2193.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2193 ]]>OLED display is visible in dark environments Simple operation: Press the MEASURE button Auto height adjustment YMS-L (Shore A, B, E, O, OO, Asker C) YMS-H (Shore C, D, DO) Imada YMS Motorized Durometer Test Stand are designed for consistent hardness testing of rubber and plastics using constant load, speed and time controls to meet ASTM D2240 standards. Auto height adjustment makes for quick setups. Multiple scales can be tested using the appropriate durometer, auto contact adapter and weight. Programming Imada YMS Motorized Durometer Test Stand are easily programmed using push-buttons and highly visible OLED menu screens. Selectable Auto or Manual modes with timer hold and digital speed control up to 20mm/sec. Fast Approach starts tests at maximum speed combined with selectable clearance, which slows movement to the preset measuring speed to avoid overshoot. Auto Contact Imada YMS Motorized Durometer Test Stand also feature auto contact which enables the durometer to align perpendicularly to the sample to make full, even contact. External ControlUse ASCII commands to start, stop or output results. Or use the open collector contact signal to start and stop. Features OLED display is visible in dark environments Simple operation: Press the MEASURE button Modes: Auto and Manual (TK Mode with optional TK durometer) Auto height adjustment Fast Approach and slow to measuring speed to minimize overshoot Auto Contact adjusts the durometer to make full, even contact with the sample surface. External Control: Use ASCII commands to start, stop and output data. Program menu security lock Rugged metal construction Specifications Modes 0.5 - 20.0 mm/sec Units Selectable mm or inches Timer 0.5 - 9.9 in 0.1 second increments, 10 - 99 in 1 second increments Clearance 45mm with TKD durometer, 95mm without coupling Throat 70mm Scales Model Durometer Scale Contact Adapter Weight YMS-L Shore A, Shore B, Asker C, Shore O, Shore OO SA-L - YMS-H Shore C, Shore D, Shore DO SA-H WH-5k Downloads Imada YMS Motorized Durometer Test Stand - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-yms-motorized-durometer-test-stand-p-2193.html Wed, 24 Jul 2024 16:17:58 +0000 USD 2193 Imada 1000 YMS https://www.abqindustrial.net/store/images/imada-yms-motorized-durometer-test-stand.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-tkd-tkx-digital-durometer-with-output-p-2192.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2192 ]]>NIST Traceable Certificate included; ISO-17025 Optional USB output Modes: Peak, Single/ Dual Timer Hold and Real Time Imada TKD Digital Durometer with USB Output Imada TKX Digital Durometer with USB and Bluetooth Output The Imada Digital Durometer with Output is a high-quality, easy-to-use instrument for measuring the hardness of rubber, plastics, foam, and many other materials. It features a bright, easy-to-read OLED display, push-button operation, and simple menus. The durable metal housing protects the instrument from damage, and the rechargeable battery provides long-lasting power. The Imada Digital Durometer with Output also includes a calibration certificate traceable to NIST, ensuring accurate results. Imada Digital Durometer with Outputhave three modes; peak, timer hold which records the creep*, and real time. Auto average averages a user-selectable number of peak readings. Hardness data can be transmitted via USB (or optionally Bluetooth) to PCs or saved in the 400 data memory. Optional SW-1-TK data acquisition software is available. Features NIST Traceable Certificate included; ISO-17025 Optional USB output Optional Bluetooth Output (TKX models) OLED display is visible in dark environments Modes: Peak, Single/ Dual Timer Hold and Real Time Auto average – average a user-selectable number of readings. 400 data memory Rugged metal construction, powered by the rechargeable battery or AC adapter Ranges Standard Probe Long Probe Scale Standard TKD-A TKD-AL Shore A ASTM D2240, ISO 868, 7619 TKD-B TKD-BL Shore B ASTM D2240 TKD-C TKD-CL Shore C ASTM D2240 TKD-AC TKD-ACL Asker C JIS K7312 TKD-D TKD-DL Shore D ASTM D2240, ISO 868, 7619 TKD-DO TKD-DOL Shore DO ASTM D2240 TKD-E TKD-EL Shore E ASTM D2240 TKD-O TKD-OL Shore O ASTM D2240 TKD-O TKD-OOL Shore OO ASTM D2240 Downloads TKD-TKX Digital Durometer with Output - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/imada-tkd-tkx-digital-durometer-with-output-p-2192.html Wed, 24 Jul 2024 16:18:37 +0000 USD 2192 Imada 1000 TKD-TKX https://www.abqindustrial.net/store/images/tkd-tkx-digital-durometer-with-output.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-fg-7000l-digital-force-gauge-p-2191.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2191 ]]>1000 Hz Sample Rate combined with ±0.2% F.S. accuracy provides fast sampling producing great resolution and more accurate results Four mode operation: Track, Peak, First Peak & Auto-Peak 180° Auto-reversible display, tension/compression icons, and dual printed keypad allows usage as a portable gauge or mounted upside down on a test stand The Shimpo FG-7000L Digital Force Gauge provide additional tension and compression testing flexibility with their external load cell input. External load cells are immediately recognized when connected to the display base. Three styles of load cells are available for your specific testing needs. The first is the 'S' Beam style load cell for both tension and compression tests with capacities ranging from 220 lbf (100 kgf) up to 4500 lbf (2000 kgf). The second style available is the 'Ring' type load cell for compression applications with capacities ranging from 2250 lbf (1000 kgf) all the way up to a hefty 44,000 lbf (200 kN). The third style is the “Mini Ring” type load cell for compression applications with capacities from 220 lbg (100 kgf) to 22 klbf (10,000 kgf). The multiple-language FG-7000L's provide menu programming for easy selection and set-up of the instrument to your desired requirements. Four selectable modes of operation include: Track mode for live readings, Peak mode for displaying the maximum reading, Auto Peak where the peak resets after a programmed period of time and First Peak where only the initial peak is recorded once a decrease is sensed. The display has two selectable operations, numerical view with bar graph or graphical view with bar graph. In graph mode if alarm tolerances are set, the user is presented a quick indication where their process is in relation to their upper and lower limit graph lines and can immediately determine pass/fail status. These high-tech instruments can easily data log a reading at the push of a button for simple data acquisition, or be set to continuous data storage. Data can be viewed on the screen, sent to the optional printer, or loaded to be analyzed and graphed on the free software program. The 1,000 point memory with definable groups allows for multiple tests to be recorded and easily separated upon loading. In addition, the comparator output can be set up for integration of the instrument into a quality system for repetitive testing such as on a production line. The FG-7000L's robust housings are designed to fit perfectly in the operator's hand for portable testing. The large back-lit, 180°auto-reversible display, compression/tension icons, combined with the dual labeled key pad allows for usage of the gauge in various positions while still being able to easily view and operate. These many features make the FG-7000L the ideal force instrument for various applications such as, incoming quality inspection, finished goods testing, R&D or almost any force testing requirement. Kit Contents Shimpo FG-7000L Digital Force Gauge A/C Adapter/Charger USB cable Calibration Certificate Carrying Case Features 1000 Hz Sample Rate combined with ±0.2% F.S. accuracy provides fast sampling producing great resolution and more accurate results Four mode operation: Track, Peak, First Peak & Auto-Peak 180° Auto-reversible display, tension/compression icons, and dual printed keypad allows usage as a portable gauge or mounted upside down on a test stand Programmable High & Low Limits allow for instant visual and audible indication of pass or fail testing 1000 point data collection capability can be viewed on display, sent to optional printer, or uploaded to software package for further analysis Rugged, ergonomic die cast aluminum construction allows usage in demanding applications Comparator output function provides user with easy Pass/Fail testing system integration capabilities Multi-language and engineering units selection provides flexible user comfort Datalogging/graphing software available for free download on website Specifications Accuracy ± 0.2% F.S. Selectable Units kN, N, kgf, tf, lbf and klbf. (Depending on Range) Overload Capacity S beam: 150% of F.S.; Ring & Mini Ring Type 120% of F.S. (LCD flashes beyond 110% of F.S.) Measurement Method Peak, Autopeak, First Peak or Track Mode Data Sampling Rate 1000 Hz Display 160*128 dot matrix LCD with LED Backlight Display Update Rate 10 times/second Resolution See chart Memory 1000 data Set Point Programmable high and low limits Battery Indicator Display flashes battery icon when battery is low Power 3.6VDC 800mAH Ni-MH rechargeable batteries Battery Life Approximately 16 hours continuous use per full charge Charger / Adaptor Universal USB/BM charger, Input: 110 ~ 240VAC Temperature Effects Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-fg-7000l-digital-force-gauge-p-2191.html Sat, 29 Jun 2024 15:08:56 +0000 USD 2191 Shimpo 1000 FG-7000L https://www.abqindustrial.net/store/images/shimpo-fg-7000l-digital-force-gauge.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-fg-3000r-digital-force-gauge-p-2190.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2190 ]]>Compact load-cell sensor combined with 8.7" (220 mm) length flexible, metal-braided cable enables readings to be taken in difficult locations 1000 Hz Sample Rate combined with ±0.3% F.S. accuracy provides fast sampling producing great resolution and more accurate results The new Shimpo FG-3000R Digital Force Gauge are the choice for simple, cost-effective compression testing. Combining one of the most compact housings, yet maintaining a large back-lit LCD, these units were designed to fit perfectly in the hand for ease of use. The integral button style load-cell attached via the flexible, metal braided cable enables readings to be taken in machinery or fixtures where other force gauge adapters are unable to reach or fit. The multi-language FG-3000's provide menu programming for intuitive set-up of the instrument to your desired requirements. Three modes of operation are selectable: Track mode displays live readings, Peak mode records the maximum reading sensed during the test, and Pre-set mode which activates user defined high and low limit set points. The programmable limits provide a quick visual and audible indication if a test passes or fails. In addition, a comparator output enables integration of the instrument into your quality system for repetitive testing such as on production lines. The display graphics facilitate user comprehension and operation. An analog bar graph provides perspective of current reading in comparison to the full scale range. Pass/Fail icons provide an instant response of the testing outcome while a storage symbol acknowledges when a reading is logged. A menu-selectable display orientation streamlines switching from push to pull testing for portable or test stand applications. Kit Contents Shimpo FG-3000R Digital Force Gauge A/C Adapter/Charger USB Cable Calibration Certificate Instruction Manual Carrying Case Features Compact load-cell sensor combined with 8.7" (220 mm) length flexible, metal-braided cable enables readings to be taken in difficult locations 1000 Hz Sample Rate combined with ±0.3% F.S. accuracy provides fast sampling producing great resolution and more accurate results Three mode operation: Track, Peak & Preset Limits 180° reversible display, tension/compression icons, and vertical printed keypad allows usage as a portable gauge or mounted upside down on a test stand Programmable High & Low Limits allow for instant visual and audible indication of pass or fail testing in Preset mode 500 point data collection capability can be viewed on display, sent to optional printer, or uploaded to software package for further analysis Rugged, ergonomic die cast aluminum construction allows usage in demanding applications Comparator output function provides user with easy Pass/Fail testing system integration capabilities Multi-language and engineering unit's selection provides flexible user comfort Field Calibration capability eliminates need to send to lab Free Data logging/graphing software available for free download on website Specifications Accuracy ± 0.3% F.S. Selectable Units kN, kgf, N, klbf and lbf. (Depending on Range) Overload Capacity 150% of F.S. (LCD flashes beyond 110% of F.S.) Measurement Method Peak, Track, Preset Data Sampling Rate 1000 Hz Display 160*128 dot matrix LCD with Backlight Display Update Rate 10 times/second Resolution See chart Memory 500 data Set Point Programmable high and low limits in Preset Mode Battery Indicator Display flashes battery icon when battery is low Power 3.6 VDC 400 mAH Ni-MH rechargeable batteries Battery Life Approximately 16 hours continuous use per full charge Charger / Adaptor Universal USB/BM charger, Input: 110 ~ 240 V ac Temperature Effects Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-fg-3000r-digital-force-gauge-p-2190.html Sat, 29 Jun 2024 14:02:31 +0000 USD 2190 Shimpo 1000 FG-3000R https://www.abqindustrial.net/store/images/shimpo-fg-3000r-digital-force-gauge.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-dt-107a-12-exh-extended-handle-speed-and-length-meter-p-2189.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2189 ]]>Measuring Range: 0.10 - 25,000 rpm Housing Material: Metal Warranty: 1 years Shimpo DT-107A-12-EXH LED Extended Handle Speed and Length Meter (LCD MODEL)ShimpoDT-105A-12-EXH LCD Extended Handle Speed and Length Meter (LED MODEL) The Shimpo-DT-107A-12-EXH Extended Handle Speed and Length Meter is designed for measuring surface speed and length. An extended handle allows for safer operation than traditional hand-held meters. The Shimpo-DT-107A-12-EXH Extended Handle Speed and Length Meter accurately measures RPM, m/min, ft/min, in/min, m/sec, ft/sec, and total meters/feet/inches. Overall length 20" / 51 cm. Kit Contents Shimpo DT-107A-12-EXH Extended Handle Speed and Length Meter 12" circumference surface speed wheel 2 cone tip adapters Funnel tip adapter Shaft extension 2 AA batteries NIST traceable calibration certificate Instruction Manual Carrying Case Features Includes NIST Traceable Calibration Certificate (for RPM UNITS) Built-in memory for last, maximum, minimum and 10 separate readings Rugged cast aluminum housing Includes Traceable calibration Certificate LCD Version for use in sunlight and for longest battery life (DT-105A) LED version for use in poorly lit or dark environments (DT-107A) Specifications Display Range 0.10 to 25,000 rpm with floating decimal Accuracy 0.10 to 999.99 rpm: ±0.06 rpm1,000.0 to 9,999.9 rpm: ±0.6 rpm10,000 to 25,000 rpm: ±0.006% rpm Measurement Units Per Second: Inches, Centimeters (optional, inquire)Per Minute: Revolutions, Inches, Feet, Yards, MetersPer Hour: Miles, Kilometers (optional, inquire)Total: Revolutions, Inches, Feet, Yards, Centimeter, Meters Origin Taiwan Memory System 13 readings are stored in memory and retained for 5 minutes(last, max., min., and 10 measurements) Over-Range Indicator Flashing numerals Update Time 1 second (typical) Batteries 2 - 1.5 V AA Battery Life Approx. 65 hrs. (DT-105A)Life: Approx. 40 hrs. (DT-107A) Low Voltage Indicator Flashing "LO BAT" display (DT-105A)"B" display (DT-107A) Operating Temp 32 to 113° F (0 to 45° C) Accessories Included 2 cone adapters, 1 funnel adapter, 3-1/2" extension shaft, 1 surface speed wheel (6" circumference), carrying case, operating instructions Weight 0.9 pounds (400 grams) Dimensions 7.3" L x 2.4" W x 1.8" H Warranty 1 year Related Products Shimpo DT-205LR DT-207LR Handheld Tachometer NSN 6680-01-378-6490 Measuring Range: Non-Contact - 1.00 - 99,999 rpm, Contact - 1.00 - 25,000 rpm YSL-2000HD Yarn Meter Tachometer Measuring Range: Non-Contact - 1.00 - 99,999 rpm Shimpo DLM-107A Digital Length Meter Digital Length Meter LMA-3 12" Circumference Knurled Aluminum Measuring Wheel For use with models: DT-107A-12, DLM Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-dt-107a-12-exh-extended-handle-speed-and-length-meter-p-2189.html Sat, 29 Jun 2024 12:35:04 +0000 USD 2189 Shimpo 1000 DT-107A-12-EXH https://www.abqindustrial.net/store/images/shimpo-dt-107a-12-exh-extended-handle-speed-and-length-meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/bareiss-ftm-felt-tension-meter-p-2188.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2188 ]]>Felt Tension Meter Measuring Range: 0-120 pli Measures the running tension of dryer felts, forming fabrics Measuring Range: 0-120 pli or 0.5-200 N/cm The Bareiss FTM Felt Tension Meter provides a fast and accurate method for measuring the running tension of dryer felts, forming fabrics and press felts used in the papermaking process. These elements can be referred to as a sieve, screen, or wire. It is designed to be used by operators or service technicians to help set the appropriate tensions needed for the highest performance and lowest wear. It can be used while the material is running or stationary and can be used in any orientation. Kit Contents Bareiss FTM Felt Tension Meter Carrying Case Features IP 64 Rated (splash proof) Memory Pointer holds the peak measurement One-hand Operation provides for operator safety Works in any orientation Optional units of measure offered is N/cm Specifications Measuring Range 0-120 pli (standard) | 0.5-200 N/cm (optional) Dimensions 9.1 x 5.5 x 8.3 in / 230 x 140 x 210mm Weight 2.56 lb / 1.16 kg Downloads Bareiss FTM Felt Tension Meter - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/bareiss-ftm-felt-tension-meter-p-2188.html Tue, 25 Jun 2024 20:58:42 +0000 USD 2188 Bareiss 1000 FTM https://www.abqindustrial.net/store/images/bareiss-ftm-felt-tension-meter.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/keane-tator-surface-roughness-comparators-p-2187.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2187 ]]>Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces 5 reference profile grades per comparator Made of durable high purity nickel Surface Profile Comparators provide a quick means for visually and tactilely assessing surface profile depth generated by abrasive blast cleaning with or without an illuminated magnifier. Disks include 4 or 5 reference grade profiles, depending on model. Features 3" durable reference disks include 5 reference profile grades per comparator to visually compare profile depth generated by abrasive blast cleaning. Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces 5 reference profile grades per comparator Made of durable high purity nickel Select from Grit/Slag Blast, Sand Blast, and Shot Blast Illuminated 5x Magnifier for use with comparator disks available Imperial units Conforms to ASTM D4417-A Specifications Name / Description Range DeFelsko SRCMILGRIT Grit Blast - Keane-Tator Surface Roughness Comparators 1.5, 2, 3, 4.5, 5.5 mils DeFelsko SRCMILSAND Sand Blast - Keane-Tator Surface Roughness Comparators 0.5, 1, 2, 3, 4 mils DeFelsko SRCMILSHOT Shot Blast - Keane-Tator Surface Roughness Comparators 2, 2.5, 3, 4, 5.5 mils DeFelsko SRCMAG Illuminated Magnifier Keane-Tator Surface Roughness Comparators ——— Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/keane-tator-surface-roughness-comparators-p-2187.html Fri, 21 Jun 2024 11:00:07 +0000 USD 2187 DeFelsko 998 Keane-Tator https://www.abqindustrial.net/store/images/keane-tator-surface-roughness-comparators.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-iso-surface-roughness-comparators-p-2186.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2186 ]]>Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces 4 reference profile grades per comparator Select from Grit Blast and Shot Blast Surface Profile Comparators provide a quick means for visually and tactilely assessing surface profile depth generated by abrasive blast cleaning with or without an illuminated magnifier. Disks include 4 or 5 reference grade profiles, depending on model. Features Durable roughness comparators contain four reference profile grades per disk to assess surface profile depth generated by abrasive blast cleaning by both touch and sight. Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces 4 reference profile grades per comparator Select from Grit Blast and Shot Blast Metric Units Conforms to ISO 8503-1 and ISO 8503-2 Specifications Name / Description Range DeFelsko SRCMICGRIT Grit Blast - ISO Surface Roughness Comparators 25, 60, 100, 150 µm DeFelsko SRCMICSHOT Shot Blast - ISO Surface Roughness Comparators 25, 40, 70, 100 µm Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-iso-surface-roughness-comparators-p-2186.html Fri, 21 Jun 2024 11:00:03 +0000 USD 2186 DeFelsko 1000 SRCMIC https://www.abqindustrial.net/store/images/defelsko-iso-surface-roughness-comparators.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-positest-pg-paint-inspection-gage-p-2185.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2185 ]]>Durable anodized aluminum housing Rotating cutting tip holder holds up to four cutting tips Powerful 50x microscope with precision optics and rotating scale in Imperial and Metric Units Measures the thickness of one or multiple layers of coating on any substrate using a proven destructive technique. Durable anodized aluminum housing Rotating cutting tip holder holds up to four cutting tips Powerful 50x microscope with precision optics and rotating scale in Imperial and Metric Units Certificate of Calibration showing traceability to NIST included Conforms to ISO 2808/19399, ASTM D4138, JIS K 5600-1-7, and NF T30-123 Kit Contents DeFelsko PosiTest PG Paint Inspection Gage 3 cutting tips (1x, 2x, and 10x) 1/8” hex key, one AAA battery Permanent black marker Long Form Certificate of Calibration traceable to NIST Instructions Custom case 2 year warranty Features Simple Ideal for coatings up to 1,250 µm (50 mils) depending on cutting tip—1x, 2x, and 10x tips included (5x cutting tip available) Keeps up to four cutting tips secure and ready for use Uses one, easy to change AAA battery Integrated bright white light with easy on/off and automatic timer to conserve battery life Durable Durable anodized aluminum housing with rotating cutting tip holder Includes all tools and accessories required for testing in accordance with national and international standards Two year warranty Accurate Long Form Certificate of Calibration showing traceability to NIST included Powerful 50x microscope with precision optics and rotating scale in Imperial and Metric Units for quick and accurate measurement Large field of view provides a comfortable eye distance with or without glasses Conversion Chart Coating Thickness Range Cutting Tip Conversion Factor Microns Mils 1X 1 0 - 1,250 µm 0 - 50 mils 2X 0.5 0 - 625 µm 0 - 25 mils 5X 0.2 0 - 250 µm 0 - 10 mils 10X 0.1 0 - 125 µm 0 - 5 mils Accuracy Cutting Tip Microns Mils 1X ± 1 mil ± 25.4 µm 2X ± 0.5 mil ± 12.7 µm 10X ± 0.1 mil ± 2.5 µm Accessories DeFelsko PGCUTTER Replacement Tungsten Carbide Cutting Tips 1x, 2x, 5x, and 10x replacement tips sold individually Downloads DeFelsko PosiTest PG Paint Inspection Gage - Data Sheet DeFelsko PosiTest PG Paint Inspection Gage - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-positest-pg-paint-inspection-gage-p-2185.html Wed, 19 Jun 2024 14:09:34 +0000 USD 2185 DeFelsko 1000 PG https://www.abqindustrial.net/store/images/defelsko-positest-pg-paint-inspection-gage.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pcx8-dl-precision-thickness-gauges-z-314-0001-p-2184.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2184 ]]>Interface Echo (I-E) Echo-Echo (E-E) & Plastic Mode (PLAS) measurement modes Measurement range from 0.15mm (0.006") to 25.40mm (1.00") 2-Point, 1-Point, Material & Factory Calibration options The Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 range comes with all the features and functionality necessary for precisely measuring material thickness on virtually any material. AccurateMeasures thin materials with pinpoint accuracy Flexible & easy to use, the Dakota PCX Precision Thickness Gauge has a measurement range from 0.15mm (0.006") to 25.40mm (1.000") with up to ±1% accuracy, across three measurement modes; Interface Echo (IE), Echo Echo (EE) & Plastic mode (PLAS). PowerfulStore each measurement for further analysis Up to 100,000 readings can be saved into the gauge memory as each measurement is taken, which can be downloaded later into an inspection application or into DakMaster™ for further analysis and reporting. Wireless ConnectivitySeamlessly connect to PC Connect the Dakota PCX Precision Thickness Gauge via Bluetooth® or USB to a PC & download the data into an inspection application or into DakMaster™ Software for instant report generation. CustomisableChoose & customise the reading display The Dakota PCX Precision Thickness Gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, Selected Statistics, Bar Graph, Run Chart & Differential Mode. Measurement Modes Interface Echo (IE); The total thickness from the top of any coating through to the material density boundary (typically the back-wall) is measured. Suitable for measurement of materials between 1.65mm and 25.4mm (0.065" to 1") thick. Echo Echo (EE); ideal for measuring thin materials, the material thickness from the top surface of the material to the material density boundary (typically the backwall) is measured. Suitable for measurement of materials between 0.15mm and 10.15mm (0.006" to 0.4") thick. Plastic Mode (PLAS); specifically used for measuring very thin plastics between 0.15mm and 5mm (0.006" to 0.197") thick. A graphite delay line is required when using this mode. User Definable Upper and Lower Limits The Dakota PCX Precision Thickness gauge has user definable upper and lower limits with audible and visual pass/fail warnings allowing the user to compare readings to predefined values. The Dakota PCX Precision Thickness Gauge can store up to 40 pre-programmed limits which can be set for individual readings or for each batch. If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas. Calibration Options The Dakota PCX Precision Thickness Gauge has a number of calibration options including the 1-Point & 2-Point method and Velocity. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane. The Dakota PCX Precision Thickness Gauge allows users to store into memory up to three calibrations. Once saved the user can select a calibration without the need to re-calibrate the gauge. Using the gauge’s alpha-numeric function, calibration memories can be re-named to suit the calibration setting. Kit Contents Dakota PCX8-DL Ultrasonic Precision Thickness Gauge 15MHz transducer (TXC15M0CM) Ultrasonic Couplant 3 x screen protectors Wrist harness 2 x AA batteries Plastic Transit Case Calibration Certificate USB Cable DakMaster™ Software Operating Instructions Features Easy to use menu structure in multiple languages Tough, impact, waterproof and dust resistant equivalent to IP64 Bright colour screen with permanent backlight Ambient light sensor, with adjustable brightness Scratch and solvent resistant display; 2.4" (6cm) TFT Large positive feedback buttons USB power supply; via PC Gauge software updates1 via DakMaster™ Software 2 year gauge warranty Limits: 40 definable audible & visual pass/fail warnings Measurement Mode Echo Echo (E-E) Interface Echo (I-E) Plastic Mode (PLAS) Measurement Rate 4, 8, 16Hz Thickness Range E-E 0.15 - 10.15mm (0.006-0.400") I-E 1.65 - 25.40mm (0.065-1.000") PLAS 0.15 - 5.00mm (0.006-0.197") Measurement Units mm or inches m/s, inch/μs Repeatability / Stability Indicator Display Mode Reading Selected statistics Scan thickness bar graph Readings and Differential Run Chart B-Scan cross sectional display Selectable Reading Resolution Lo; 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs Hi; 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs Statistics Number of readings,n; Mean average, x ; Standard deviation, σ. Lowest reading, Lo; Highest reading, Hi Low / high limit value Reading Range Value Nominal Value Number of readings below low limit Number of readings above high limit Calibration Options Zero (using the integral zero disc) 1 - point 2 - point Material selection; 39 preset materials Factory; resets to the factory calibration Velocity (speed of sound) Known thickness value Calibration Features Calibration lock; with optional PIN Lock Test calibration feature Calibration memories: 3 programmable memories Measurement outside calibration warning Data Logging Number of readings: 100,000 Number of batches: 1,000 Sequential batching Grid batching Fixed Batch Size Mode; with batch linking Obstruct entry; add 'obst' into grid location Delete last reading Date & time stamp Review, clear & delete batches Display Mode Alpha numeric batch names; user definable Batch review graph Data Output USB to PC Bluetooth® to PC, Android™ & iOS devices DakMaster™ software Transducer Probe Type Single Element Auto transducer recognition Specifications Certificate Yes Measurement Range Interface Echo (IE) 1.65 - 25.40mm (0.065 - 1.00") Echo Echo (EE) 0.15 - 10.15mm (0.006 - 0.400") Measurement Accuracy Plastic Mode (PLAS) 0.15 - 5.00mm (0.006 - 0.197") Interface Echo (IE) ±0.015mm (1.65-2.99mm), ±0.5%(3.00-25.4mm) Plastic Mode (PLAS) ±0.015mm (0.15-2.99mm), ±0.5% (3.00-5.00mm) Operating Temperature -10 to 50°C (14 to 122°F) Power Supply 2 x AA batteries Battery Life Alkaline: 15 hours, Lithium: 28 hours Gauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.84 x 1.46"), without transducer Related Products Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Z-308-0001 / Z-308-0002 with T-402-5507 Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger with USB Output Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 ideal for applications with minimum access or contact areas. Enhanced graphic scope Displays A Scan & B Scan for a cross section view Downloads Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Instruction Manual Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Declaration Conformity Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Declaration Conformity UKCA Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pcx8-dl-precision-thickness-gauges-z-314-0001-p-2184.html Wed, 19 Jun 2024 03:42:54 +0000 USD 2184 Dakota Ultrasonics 1000 PCX8-DL https://www.abqindustrial.net/store/images/dakota-pcx8-dl-precision-thickness-gauges-z-314-0001.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cx-thickness-gauges-p-2183.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2183 ]]>Auto recognition, ensures correct probe is identified when transducer is changed Scan Mode at 16Hz, ideal for measuring a large surface area User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001") The Dakota CX Ultrasonic Material Thickness Gauges have all the features and functionality necessary for measuring material thickness and velocity on virtually any material - for a wide range of applications. Kit Contents Dakota Ultrasonics CX2 Ultrasonic Material Thickness Gauge - Z-310-0001 Dakota Ultrasonics CX2 Ultrasonic Material Thickness Gauge 5MHz ¼" right angle dual element transducer (TXC5M00CP-4) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX4 Ultrasonic Material Thickness Gauge - Z-311-0001 Dakota Ultrasonics CX4 Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX6-DL Ultrasonic Material Thickness Gauge - Z-312-0001 Dakota Ultrasonics CX6-DL Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX8-DL Ultrasonic Material Thickness Gauge - Z-313-0001 Dakota Ultrasonics CX8-DL Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Features Auto recognition, ensures correct probe is identified when transducer is changed Scan Mode at 16Hz, ideal for measuring a large surface area User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001") Pulse Echo (PE), Echo Echo ThruPaint™ & Velocity (VM) measurement modes Hi & Lo limit indicators provides indication of problem areas Integrated zero disc, ensures maximum accuracy Stores up to 100,000 readings in up to 1,000 sequential batches Selectable reading rate of 4, 8, 16Hz (4, 8, 16 readings per second) Intelligent User definable limits for pass/fail indication Users are able to set upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch. Accurate A range of calibration options for accuracy and efficiency The Dakota Ultrasonics CX Thickness Gauges have a range of calibration options including the 1-Point calibration method. Users can also select one of 39 pre-set materials stored within the gauge or store up to three calibrations into the memory. Versatile Measures uncoated & coated surfaces Flexible & easy to use, the Dakota corrosion gauge range doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored. Specifications Operating Temperature -10 to 50°C (14 to 122°F) Power Supply 2 x AA batteries Battery Life Alkaline: 15 hours Lithium: 28 hours Gauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.84 x 1.46"), without transducer Certificate Yes Comparison Chart   Part Number CX2 CX4 CX6-DL CX8-DL Pulse Echo (PE) 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") Echo Echo ThruPaint™ (EE) 2.54 - 20.00mm (0.100-0.787") 2.54 - 20.00mm (0.100-0.787") 2.54 - 20.00mm (0.100-0.787") Velocity Mode (VM) 1,250-10,000m/s (0.0492 - 0.3937in/μs) 1,250-10,000m/s (0.0492 - 0.3937in/μs) 1,250-10,000m/s (0.0492 - 0.3937in/μs) Measurement Accuracy Pulse Echo (PE) ±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm) ±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm) ±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)±0.004" (0.025-0.393")±0.5% (0.394-20.00") ±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)±0.004" (0.025-0.393")±0.5% (0.394-20.00") Echo Echo ThruPaint™ (EE) ±0.1mm (2.54-25.4mm) ±0.1mm (2.54-25.4mm) ±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)±0.004" (0.100-0.393")±0.5% (0.394-0.787") ±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)±0.004" (0.100-0.393")±0.5% (0.394-0.787") Easy to use menu structure in multiple languages Tough, impact, waterproof and dust resistant equivalent to IP64 Bright colour screen; with permanent backlight Ambient light sensor, with adjustable brightness Scratch and solvent resistant display; 2.4" (6cm) TFT Large positive feedback buttons USB power supply; via PC Gauge software updates via DakMaster™ Software 2 year gauge warranty Limits: 40 definable audible & visual pass/fail warnings ― ― ― Measurement Mode  Pulse Echo (PE) Echo Echo ThruPaint™ (EE) ― Velocity Mode (VM) ― ― Measurement Rate 4, 8, 16Hz ― 4Hz 4, 8, 16Hz 4, 8, 16Hz Thickness Range PE 0.63-500mm (0.025-19.999") ― EE 2.54 - 25.4mm (0.100-1.0") ― Measurement Units mm or inches ― m/s, inch/μs   Repeatability / Stability Indicator Display Mode Reading ― Selected statistics ― ― Scan thickness bar graph ― ― Run Chart ― ― Readings and Differential ― ― ― B-Scan cross sectional display ― ― ― Selectable Reading Resolution Lo; 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs Hi; 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs ― ― Statistics Number of readings,n; Mean average, x ; Standard deviation, σ. ― ― Lowest reading, Lo; Highest reading, Hi ― ― Low / high limit value ― ― ― Reading Range Value ― ― ― Nominal Value ― ― ― Number of readings below the low limit ― ― ― Number of readings above the high limit ― ― ― Calibration Options Zero (using the integral zero disc) ― 1 - point ― 2 - point ― ― Material selection; 39 preset materials ― Factory; resets to the factory calibration ― Velocity (speed of sound) ― ― Known thickness value ― ― Calibration Features Calibration lock; with optional PIN Lock ― ― Test calibration feature ― ― Calibration memories: 3 programmable memories ― ― ― Measurement outside calibration warning ― ― ― Data Logging Number of readings ― ― 1,500 100,000 Number of batches ― ― 1 1,000 Sequential batching ― ― Grid batching ― ― ― Fixed Batch Size Mode; with batch linking ― ― ― Obstruct entry; add 'obst' into grid location ― ― ― Delete last reading ― ― Date & time stamp ― ― Review, clear & delete batches ― ― Alpha numeric batch names; user definable ― ― ― Batch review graph ― ― ― Data Output USB to PC ― Bluetooth® to PC, Android™ & iOS devices ― ― DakMaster™ software ― ― Transducer Probe Type Dual Element ― Auto transducer recognition Auto V-path correction Downloads Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Instruction Manual Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Declaration Conformity Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Declaration Conformity UKCA Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Instruction Manual Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Declaration Conformity Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Declaration Conformity UKCA Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cx-thickness-gauges-p-2183.html Wed, 19 Jun 2024 03:41:36 +0000 USD 2183 Dakota Ultrasonics 2200 CX https://www.abqindustrial.net/store/images/dakota-cx-thickness-gauges.jpg https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-press-o-film-replica-tape-p-2182.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2182 ]]>Same trusted Coarse and X-Coarse replica foam in new strip format Simple technique: place on the surface, press/burnish it into the surface, remove, and measure Proven technique with accuracy and repeatability validated by numerous independent studies Less than 30 seconds required per test Testex Replica Tape measures surface profile by creating a replica of the surface, which can be measured using a micrometer Same trusted Coarse and X-Coarse replica foam in new strip format Simple technique: place on the surface, press/burnish it into the surface, remove, and measure Proven technique with accuracy and repeatability validated by numerous independent studies Measure using an analog precision micrometer or electronic PosiTector RTR Replica Tape Reader Less than 30 seconds required per test Only surface profile measurement method recognized by ISO, ASTM, and AMPP Conforms to ASME B46, ASTM D4417, ISO 8503-5, NACE SP287, SSPC-PA 17, SP5, SP6, SP10, SP11-87T, and others Testex Press-O-Film Replica Tape consists of a layer of compressible foam affixed to an incompressible polyester substrate of highly uniform thickness. When pressed against a roughened steel surface, the foam collapses and forms an impression of the surface. Placing the compressed Testex tape between the anvils of a micrometer thickness gage and subtracting the thickness of the incompressible substrate gives a measure of the surface profile. Features Simple Simple technique: place on the surface, press/burnish it into the surface, remove, and measure Less than 30 seconds required per test Measure using an analog precision micrometer or electronic PosiTector RTR Replica Tape Reader Ideal for measuring on round surfaces and other challenging locations Complete Kits available with everything needed for testing Durable Option to retain a permanent physical replica of the surface after measurement for archival reporting Withstands nearly any environment, including temperatures up to 60° C Long shelf life with no expiration date Hard-shell plastic case included with Replica Tape, Micrometers, and Kits Accurate Proven technique with accuracy and repeatability validated by numerous independent studies Quantitative test - no need to interpret or compare measurements Only surface profile measurement method recognized by ISO, ASTM, and AMPP Measures over a relatively large area for high repeatability Generate high-resolution 3D images of the surface using Optical Grade Replica Tape and the PosiTector RTR 3D Conventional Testex Press-O-Film Tape Grades - Models Testex Press-O-Film replica tape is available in a variety of thickness ranges for measuring substrate roughness from 0.5 - 6 mils (12 - 150 µm). Testex RTC Coarse Press-O-Film Replica Tape Testex RTXC X-Coarse Press-O-Film Replica Tape Testex RTXCPLUS X-Coarse Plus Press-O-Film Replica Tape Testex RTCMIN Coarse Minus Press-O-Film Replica Tape ORDER CODE ORDER CODE ORDER CODE ORDER CODE RTC RTXC RTXCPLUS RTCMIN GRADE GRADE GRADE GRADE Coarse X-Coarse X-Coarse Plus Coarse Minus RANGE RANGE RANGE RANGE 0.8 to 2.0 mils 20 to 50 µm 1.5 to 4.5 mils 38 to 115 µm 4.0 to 6.0 mils 100 to 150 µm 0.5 to 1.0 mils 12 to 25 µm MEASUREMENT TOOL MEASUREMENT TOOL MEASUREMENT TOOL MEASUREMENT TOOL Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Optical Grade Testex Press-O-Film Tape Grades - Models Testex Press-O-Film Optical Grade replica tape, when used with PosiTector RTR 3D models, provides higher quality surface data files (.SDF) than conventional replica tape. Optical Grade Replica Tape is available in Coarse or X-Coarse. Testex RTCOGOptical Grade Coarse Press-O-Film Replica Tape Testex RTXCOGOptical Grade X-Coarse Press-O-Film Replica Tape ORDER CODE ORDER CODE RTCOG RTXCOG GRADE GRADE Optical Grade Coarse Optical Grade X-Coarse RANGE RANGE 0.8 to 2.5 mils20 to 64 µm 1.5 to 4.5 mils38 to 115 µm MEASUREMENT TOOL MEASUREMENT TOOL DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters Legacy Testex Press-O-Film Tape Grades - Models All tape grades are available in the legacy roll format. Instructions and Standards will continue to support both methods and burnishing tools. Testex RTC-A Coarse Grade Press-O-Film Replica Tape TestexRTXC-A X-Coarse Grade Press-O-Film Replica Tape Testex RTXCPLUS-A X-Coarse Plus Grade Press-O-Film Replica Tape ORDER CODE ORDER CODE ORDER CODE RTC-A RTXC-A RTXCPLUS-A GRADE GRADE GRADE Coarse X-Coarse X-Coarse Plus RANGE RANGE RANGE 0.8 to 2.5 mils 20 to 64 µm 1.5 to 4.5 mils38 to 115 µm 4.6 to 5.0 mils 116 to 127 µm MEASUREMENT TOOL MEASUREMENT TOOL MEASUREMENT TOOL Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage Testex Digital Micrometer Thickness Gage Testex Micrometer Dial Thickness Gauge DeFelsko PosiTector RTR H Replica Tape Reader / Surface Profile Gage How It Works Prepare Burnish Measure Clean the surface with a putty to remove dust and other contaminants. Use cleaning putty to remove dust, debris, or residual blast media from the measurement site by firmly pressing the putty onto the surface to be tested using your fingers and remove. Select the appropriate grade of replica tape, then pull a single piece of tape free of its release paper and apply to blasted surface. Firmly compress replica film using burnishing tool by applying sufficient pressure in a circular and x-y rubbing motion. When complete, remove tape from surface. Insert the compressed replica tape between the micrometer's measurement anvils and take a reading. Ensure the tape is properly positioned so that the burnished region is centered in the anvils with the adhesive side down. Related Products Testex RTM Digital Micrometer Thickness Gage Custom-designed to be the optimal tool for measuring replica tape Testex Analog Dial Thickness Gages To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces DeFelsko PosiTector RTR H Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape—producing a more accurate peak-to-valley height measurement DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters Downloads Testex Digital Micrometer Thickness Gage - Quick Guide Testex Digital Micrometer Thickness Gage - Instruction Manual Testex Digital Micrometer Thickness Gage - Instruction Manual Eupore Testex Digital Micrometer Thickness Gage - Instruction Manual Asia Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-press-o-film-replica-tape-p-2182.html Tue, 04 Jun 2024 02:48:09 +0000 USD 2182 Testex 936 Press-O-Film https://www.abqindustrial.net/store/images/testex-press-o-film-replica-tape.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/testex-rtm-digital-micrometer-thickness-gage-p-2181.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2181 ]]>Custom-designed to be the optimal tool for measuring replica tape Makes taking measurements and creating reports easier than ever The Testex RTM Digital Micrometer Thickness Gage makes using Testex Replica Tape even easier. It is custom-designed to be the optimal tool for measuring replica tape, and makes taking measurements and creating reports easier than ever. The Testex RTKIT Digital Micrometer Kit Thickness Gage includes everything required to measure the surface profile using replica tape. Kit Contents Testex RTM Digital Micrometer Thickness Gage Testex RTM Digital Micrometer Thickness Gage USB Cable Certificate of Calibration 1 AAA battery Case Instruction Manual Testex RTKIT Digital Micrometer Kit Thickness Gage Testex RTM Digital Micrometer Thickness Gage 3 Cartons of Replica Tape – Coarse, X-Coarse, and X-Coarse Plus 2 Burnishing Tools Classic Burnishing Tool High Accuracy Burnishing Tool USB Cable Certificate of Calibration 1 AAA battery Case Instruction Manual Features Easy to Use Bright, high-contrast digital color display with large numerals for easy viewing in bright or dark environments Measures in both Microns and Mils Built-in memory for up to 250 readings with on-screen statistics. View and download measurements on any computer using the included USB cable. No software required. Durable, all-metal housing Powered by a single AAA battery Designed for Replica Tape Simply select the appropriate replica tape grade to automatically apply the appropriate conversion factor and subtract the 50 µm (2 mils) backing thickness In 'Average mode', the Micrometer prompts the user and averages two readings, in compliance with international standards A traceable Certificate of Calibration is included with each digital micrometer Download to a PC or Mac Fully compatible with powerful PosiSoft Software for archiving and reporting measurement data USB Drive mode retrieves data in a manner similar to a flash drive in .csv format. No software to install or internet connection required Specifications Measuring Range 0 - 40 mils 0 - 1000 µm Accuracy 0 - 10 mils: ±0.2 mils 10 - 40 mils: ±(0.2 mils + 1%) 0 - 250 µm: ±5 µm 250 - 1000 µm: ±(5 µm + 1%) Resolution 0.1 mils 1 µm Closing Force 1.1 N Anvil Diameter 0.25" 6.35 mm Units Microns/Mils Switchable Certified Yes How It Works Prepare Burnish Measure Clean the surface with a putty to remove dust and other contaminants. Use cleaning putty to remove dust, debris, or residual blast media from the measurement site by firmly pressing the putty onto the surface to be tested using your fingers and remove. Select the appropriate grade of replica tape, then pull a single piece of tape free of its release paper and apply to blasted surface. Firmly compress replica film using burnishing tool by applying sufficient pressure in a circular and x-y rubbing motion. When complete, remove tape from surface. Insert the compressed replica tape between the micrometer's measurement anvils and take a reading. Ensure the tape is properly positioned so that the burnished region is centered in the anvils with the adhesive side down. Accessories DeFelsko RTBURNISHHA High Accuracy Burnishing Tool Burnishing tool includes a built-in spring mechanism ensuring that consistent force is used, regardless ofhow hard the tool is pressed against the surface DeFelsko STDRTSHIMS Precision Shim Set Used to verify the accuracy and operation of Testex and other spring micrometer replica tape readers DeFelsko RTRPUTTY Surface Cleaning Putty To clean the surface of debris prior to burnishing DeFelsko STDRTCSS Certified Shim Set Used to verify the accuracy and operation of all Testex micrometers. Ideal for fulfilling both ISO and in-house quality control requirements. Includes Certificate of Calibration traceable to PTB DeFelsko RTBURNISHPL Legacy Burnishing Tool Round-end plastic rubbing tool to compress replica film on the blasted surface DeFelsko RTRBURNISH Stainless Steel Burnishing Tool Round-end (Ø8 mm) rubbing tool to compress replica film on the blasted surface DeFelsko STDRTCSS Testex Certified Shim Set Used to verify the accuracy and operation of all Testex micrometers. Ideal for fulfilling both ISO and in-house quality control requirements. Includes Certificate of Calibration traceable to PTB Related Products Testex Press-O-Film Replica Tape Measures surface profile by creating a replica of the surface, which can be measured using a micrometer Downloads Testex Digital Micrometer Thickness Gage - Quick Guide Testex Digital Micrometer Thickness Gage - Instruction Manual Testex Digital Micrometer Thickness Gage - Instruction Manual Eupore Testex Digital Micrometer Thickness Gage - Instruction Manual Asia Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/testex-rtm-digital-micrometer-thickness-gage-p-2181.html Fri, 21 Jun 2024 20:54:16 +0000 USD 2181 Testex 997 RTM https://www.abqindustrial.net/store/images/testex-rtm-digital-micrometer-thickness-gage.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-icri-concrete-surface-profile-chips-p-2180.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2180 ]]>DeFelsko CSPTG Concrete Surface Profile Chips with Technical Guideline (set of 10) DeFelsko CSP Concrete Surface Profile Chips (set of 10) Technical Guideline (no. 310.2R-2013) The DeFelsko ICRI Concrete Surface Profile Chips - International Concrete Repair Institute (ICRI) produces 10 distinct concrete profiles formed by various surface preparation methods. Each profile carries a CSP number ranging from CSP 1 (nearly flat) to CSP 10 (very rough; amplitude greater than ¼" [6 mm]). These chips are designed as a visual and tactile comparator for identifying the degree of surface roughness. The user compares prepared concrete to the CSP chips and reports the chip number that most closely resembles the surface. Many jobs will specify the type of surface preparation required. The ICRI CSP Chips are approximately 16 square inches (3.5" x 4.5") and are designed to replicate 10 surface profiles shown below. Available with or without Technical Guideline (no. 310.2R-2013) Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repairs prepared by ICRI Kit Contents DeFelsko CSPTG Concrete Surface Profile Chips With Technical GuidelineSet of 10 Concrete Surface Profile Chips (CSP 1 - 10) Technical Guideline (no. 310.2R-2013) The guide provides owners, specifiers, contractors, and manufacturers with the information required to select and specify the methods for preparing concrete surfaces prior to the application of a protective system or repair material. DeFelsko CSP Concrete Surface Profile ChipsSet of 10 Concrete Surface Profile Chips (CSP 1 - 10) Specifications Look-up Table (Conversion of ICRI Panels to mils) Description ICRI CSP No. Digital Depth Micrometer / ASTM D8271 (mils)* Acid-etched 1 6 ± 2 Grinding 2 6 ± 2 Light Shotblast 3 11 ± 2 Light Scarification 4 15 ± 2 Medium Shotblast 5 16 ± 2 Medium Scarification 6 37 ± 4 Heavy Abrasive Blast 7 48 ± 4 Scabbled/Surface Retarder 8 Not measured Heavy Scarification 9 Not measured Handheld Concrete Breaker/Abrasive Blast Cleaned; or High-Pressure Water Jetting 10 Not measured *Average of 15 readings, based on the data generated in this study The Digital Method for Measuring Concrete Surface Profile ASTM D8271 documents an alternative to the traditional qualitative method using CSP Chips- digital depth micrometers such as the PosiTector SPG TS. This fully digital method nearly eliminates operator influence on the test, and provides quantitative results that can be downloaded to a PC for reporting. Learn more about the digital method, and how measurements compare with the CSP chips, in this article. ‍PosiTector SPG TS— A quantitative alternative for measuring surface profile. Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-icri-concrete-surface-profile-chips-p-2180.html Thu, 20 Jun 2024 17:13:44 +0000 USD 2180 DeFelsko 997 ICRI https://www.abqindustrial.net/store/images/defelsko-icri-concrete-surface-profile-chips.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-jd-200-dial-thickness-gauge-p-2179.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2179 ]]>Range: 0-10mm / 0.400" Resolution 0.01 mm / 0.001 Inch Jaw Depth 200mm (8") Selection of Feeler Type Measuring range 0 - 10 mm / 0 - 0.4 Inch Resolution 0.01 mm / 0.001 Inch The Hans Schmidt JD-200 Dial Thickness Gauge is used to determine the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, etc. Kit Contents JD-200 Thickness Gauge Battery Features Hans Schmidt JD-200 Dial Thickness Gauge features an easy-to-read digital display along with the high accuracy The JD-200 dial thickness gauge is available with 5 different feelers, which can be found below Measuring by spring force 1.9 N Opening by lifting device (lever) – self closing thickness gauge JD-200 Output signals: – USB – RS 232 Includes swing-out foot for on-table operation LCD display with user selectable units of measurement (mm or inch) Thickness gauge JD-200 with Sylvac dial gauge 1-Year Warranty Specifications Resolution 0.01 mm / 0.001 Inch Measuring range 0 – 10 mm / 0 – 0.4 Inch Depth of jaw 200 mm Display LCD 6 digit, 8.5 mm high Measuring principle Capacitive (Sylvac) Measuring pressure 1.9 N ± 20 % Feeler shape A/B/C/D/E (one per gauge) Lifting device Operating by lifting device - self closing Data output USB, RS 232, galvanic isolation Battery 3 V Lithium, CR 2032 Temperature range 10 – 45 °C Weight, net (gross) 700g (1150 g) Available Models Model Measuring Range Resolution Depth of jaw JD-200 10 mm0.4 Inch 0.01 mm0.001 Inch 200 mm JD-50 10 mm0.4 Inch 0.01 mm0.001 Inch 50 mm JD-100 10 mm0.4 Inch 0.01 mm0.001 Inch 100 mm JD-200-25 25 mm1 Inch 0.01 mm0.001 Inch 200 mm Feeler Shape Feeler: A For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: B For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: C For soft leather, cardboard, paper, foils, etc. Feeler: D For hard leather, plywood, fiberboard, etc. Feeler: E For sheet metal, etc. Downloads JD-200 Thickness Gauge - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-jd-200-dial-thickness-gauge-p-2179.html Thu, 25 Jul 2024 16:22:37 +0000 USD 2179 Hans-Schmidt 1000 JD-200 https://www.abqindustrial.net/store/images/jd-200-thickness-gauge.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jlx-30-moisture-meters-for-leather-p-2178.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2178 ]]>Large, custom display with auto backlight - easy to read under all conditions Bluetooth® connectivity Color-coded LED's - adjustable through EDGE™ app The Delmhorst JLX-30 Moisture Meters for Leather is a professional-grade, versatile and accurate device to address moisture issues in production, drying and quality control. The meter’s rugged construction ensures years of reliability and is the ideal tool for leather applications and tanneries everywhere. Kit Contents Delmhorst JLX-30 Moisture Meters for Leather Carrying Case Features Large, custom dislay with auto backlight – easy to read under all conditions Modern case design with large, tactile buttons and E-Z grip handle On-screen statistics – High, Low, Average, Standard Deviation, Last 10 Moisture Range: 10%-28% MC Leather Temperature correction (°F/°C) Bluetooth® connectivity Color-coded LED’s – adjustable through EDGE™ app Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1 min, 4 min or 10 min Compatible with any Delmhorst external electrode The Delmhorst EDGETM app offers: Timestamp and geotag Data export to .csv format Save unlimited readings Customized LED ranges Multi-language Specifications Power 2x AA Alkaline QR code QR code on meter for easy access to supportmaterials Size 6in x 2.9in x1.6in (22cm x 7.4cm x 4.1cm) Weight 6.9oz (20kg) without batteries; 8.6oz (24kg) with batteries Warranty 2-year warranty on manufacturer’s defects – bonus warranty with on-line registration Electrodes Delmhorst 4-E Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Useful for: Dry-kiln operators: Use on kiln-dried boards up to 2" and on air-dried boards up to 5/4.Leather producers: Use for tough leather. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Downloads Delmhorst JLX-30 Moisture Meters for Leather - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jlx-30-moisture-meters-for-leather-p-2178.html Wed, 22 May 2024 02:11:23 +0000 USD 2178 Delmhorst 1000 JLX-30 https://www.abqindustrial.net/store/images/delmhorst-jlx-moisture-meters-for-leather.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-cx-30-moisture-meters-for-cotton-p-2177.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2177 ]]>Large, custom display with auto backlight - easy to read under all conditions Bluetooth® connectivity Color-coded LED's - adjustable through EDGE™ app Delmhorst Instrument Co introduces the new model Delmhorst CX-30 Moisture Meters for CottonA high-quality moisture meter during harvest and ginning is an essential tool for measuring moisture content with confidence. Ensure a quality crop every time. The meter features the EDGE™ app, to expand meter functionality and enabling users to save unlimited readings and share data from any location. The new Delmhorst CX-30 Moisture Meters for Cotton is the perfect tool for monitoring moisture content quickly during harvest and ginning. The Delmhorst CX-30 Moisture Meters for Cotton includes 4 measurement scales and has Bluetooth® integration with the Delmhorst EDGE™ app. Kit Contents Delmhorst CX-30 Moisture Meters for Cotton Carrying Case Features Large, dashboard-like display – easy to read under all conditions Rugged case design with E-Z grip handle and tactile switch array On-screen statistics – High, Low, Average, Std Dev, View all Bluetooth® connectivity Calibrations for lint cotton, seed cotton, wool and viscose/rayon Alarm set point – alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto-off timer – set to 1m, 4m or 10m QR code on meter for easy access to support materials Compatible with any Delmhorst electrode Hard plastic carrying case included The Delmhorst EDGETM app offers: Timestamp and geotag Data export to .csv format Save unlimited readings Customized LED ranges Multi-language Specifications Measuring ranges Lint cotton (4%-18%), seed cotton (6%-20%), wool (12%-30%) and viscose/rayon (6%-25%). Display Custom LCD with backlight, contrast and brightness settings Power 2x AA Alkaline Op Temp 0-255° F (-18-124°C) Size 6in x 2.9in x1.6in (22cm x 7.4cm x 4.1cm) Weight 6.9oz (20kg) without batteries; 8.6oz (24kg) with batteries Warranty Specifications 2-year warranty on manufacturer’s defects – bonus warranty with on-line registration Electrodes Delmhorst 30-E/C Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture. Delmhorst 37-E/C Used for yarn, 1 1/2" pins with 1" penetration Delmhorst 830-T/C Used for modules, heavy duty steel, 36" T-handle Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Downloads Delmhorst CX-30 Moisture Meters for Cotton - Data Sheet Delmhorst CX-30 Moisture Meters for Cotton - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-cx-30-moisture-meters-for-cotton-p-2177.html Wed, 22 May 2024 02:09:19 +0000 USD 2177 Delmhorst 1000 CX-30 https://www.abqindustrial.net/store/images/delmhorst-cx-30-moisture-meters-for-cotton.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-80-190-0000-minitest-fh-magnetic-wall-thickness-gauge-p-2176.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2176 ]]>Magnetic Wall Thickness Gauge for Plastic Bottles, Titanium Turbine Blades, and more Ranges up to 24mm / 1" The ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge is designed for non-destructive measurements up to 24mm / 1". The ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge offers straightforward thickness measurements of non-magnetic materials such as plastic, glass, synthetics, non-magnetic metals, and composites. Components with complex geometries can also be measured with ease. An intelligent SIDSP sensor enables the ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge to provide high-precision measurement and reproducibility while compensating for the influence of temperatures in the measuring environment and in the object being measured. A wide range of sensors allows to adapt to different applications and measuring tasks. Thickness is determined by measuring the distance of a reference ball or wire to the sensor tip. The reference ball is attracted by a powerful magnet positioned directly behind the sensor tip. The steel target balls are treated according to a specialized ElektroPhysik procedure which allows reproducibility of test results of up to 0.5%. Special features such as an automatic calibration function for zero calibration and direct transfer of readings into a spreadsheet or CAQ system complement the high user comfort provided by the intuitive menu operation. Kit Contents ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge Solid plastic case for transport and storage 8 AA NiMH batteries (integrated, chargeable via USB) USB connection and charging cable Features High precision wall thickness measurement up to 24 mm Exceptional accuracy and repeatability through sensor-integrated digital signal processing (SIDSP®) 2 million readings storable in more than 200 batches Up to 20 readings per second Wear-resistant sensors with hardened sensor tips Direct data import into evaluation software Bluetooth, USB and RS 232 C interfaces IP 65 Water and Dust Resistance Specifications Low range resolution 0,1 μm (FH 4) 0,2 μm (FH10) Repeatability < ± (1 μm + 0,5 % of reading) Measuring principle Magnetostatic Logging rate 1, 2, 5, 10, 20 readings per second (selectable) Data memory 2,000,000 measured values in more than 200 measurement series Calibration Factory, Zero, Zero + up to 4 points Measuring units metric (μm, mm), imperial (mils, inch) Statistical charting Numeric, trend, and histogram Interfaces USB, Bluetooth, RS 232 C Operating temperature -10 °C - 60 °C(Storage temperature: ―20°C to +80°C) Dimensions and weight 195 mm x 120 mm x 50 mm / 775 g (device with batteries) Power supply 8 x NiMH AA rechargeable batteries chargeable via USB Technical Details Probe Overall Range Ball Diameter Ball Range FH2FH2-90 1.5mm2.5mm4.0mm 0 … 0.6mm0 … 1.3mm0 … 2.3mm FH2-MFH2-M-90 1.5mm1.5mm Magnetic2.5mm3.0mm Magnetic4.0mm 0 … 0.6mm0 … 2.0mm0 … 1.3mm0 … 4.5mm0 … 2.3mm FH-4FH4-90 0 - 6 mm0 - 0.236" 1.5mm2.5mm4.0mm 0 … 2.0mm0 … 3.5mm0 … 6.0mm FH4-1FH4-190 1.0mm1.5mm2.5mm4.0mm 0 ... 1.3mm0 … 2.0mm0 … 3.5mm0 … 6.0mm FH-4M 0 - 6 mm0 - 0.236" 1.5mm1.5mm Magnetic2.5mm3.0mm Magnetic4.0mm 0 … 2.0mm0 … 5.0 mm0 … 3.5mm0 … 9.0 mm0 … 6.0 mm FH4-WIREFH4-WIRE-90 ⌀ 0.66mm Wire⌀ 1.15mm Wire 0 … 7.0 mm0 … 13.0 mm FH10 0 - 13 mm0 - 0.512" 2.5mm4.0mm6.0mm 0 … 4.0mm0 … 7.0mm0 … 7.0mm FH10-M 2.5mm4.0mm4.0mm Magnetic6.0mm6.0mm Magnetic 0 … 4.0mm0 … 7.0mm0 … 16.0mm0 … 7.0mm0 … 24.0mm Note 1: Includes additional calibration with 1mm diameter balls for use in small concave areasNote 2: Use of Magnetic balls allows for extended measuring range Downloads ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge - Data Sheet ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-80-190-0000-minitest-fh-magnetic-wall-thickness-gauge-p-2176.html Tue, 02 Jul 2024 18:03:55 +0000 USD 2176 ElektroPhysik 1000 80-190-0000 https://www.abqindustrial.net/store/images/elektrophysik-minitest-fh-magnetic-wall-thickness-gauge.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-sspc-vis-standards-p-2174.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2174 ]]>For Surfaces Prepared by Dry Abrasive Blast Cleaning For Evaluation of the Degree of Rusting on Painted Steel Surfaces The DeFelsko SSPC VIS Standards is Ideal for Surfaces Prepared by Dry Abrasive Blast Cleaning, Evaluation of the Degree of Rusting on Painted Steel Surfaces Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning The DeFelsko VIS1 SSPC VIS 1 Standards is Ideal for Surfaces Prepared by Dry Abrasive Blast Cleaning This guide describes the use of reference photographs depicting the appearance of both previously unpainted and previously painted and partially rusted hot-rolled carbon steel prior to and after abrasive blast cleaning. Over 50 full color reference photos depict cleanliness requirements for SP 5/NACE 1 (White Metal Blast Cleaning), SP 6/NACE 3 (Commercial Blast Cleaning), SP-7/NACE 4 (Brush-Off Blast Cleaning), SP 10/ANCE 2 (Near-White Blast Cleaning), and SP 14/NACE 8 (Industrial Blast Cleaning); and are used to supplement the written SSPC/NACE blast cleaning surface preparation standards. Includes both English and Spanish languages. Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces The DeFelsko VIS2 SSPC VIS 2 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces This guide provides a method to evaluate the degree of rusting on painted steel (or iron) surfaces. The 27 reference color photographs and corresponding black and white images depict the maximum percentage of rusting allowed for each rust grade 1 through 9. This standard quantifies the degree of rusting on painted steel surfaces with a zero to ten scale based on the percentage of visible rust present on the surface. Guide and Reference Photographs for Steel Surfaces Prepared by Power and Hand Tool Cleaning The DeFelsko VIS3 SSPC VIS 3 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces The full-color reference photos represent various conditions of painted, unpainted, rusted, and welded hot-rolled carbon steel surfaces prior to and after power- and hand-tool cleaning. This guide is used to supplement reference standards SP 2 (Hand Tool Cleaning), SP 3 (Power Tool Cleaning), SP 11 (Power Tool Cleaning to Bare Metal), and SP 15 (Commercial Grade Power Tool Cleaning).Includes English, Spanish, and Portuguese languages. Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting The DeFelsko VIS4 SSPC VIS 4 / NACE VIS 7 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces This guide describes the use of reference photographs depicting the appearance of unpainted rusted carbon steel and painted carbon steel, with or without rust, prior to and after cleaning by waterjetting. These reference photos are intended to supplement the four written standards SSPC-SP WJ-1/NACE WJ-1 – Waterjet Cleaning of Metals – Clean to Bare Substrate, SSPC-SP WJ-2/NACE WJ-2 – Waterjet Cleaning of Metals – Very Thorough Cleaning, SSPC-SP WJ-3/NACE WJ- – Waterjet Cleaning of Metals – Thorough Cleaning, and SSPC-SP WJ-4/NACE WJ-4 – Waterjet Cleaning of Metals –Light Cleaning. Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning The DeFelsko VIS5 SSPC VIS 5 / NACE VIS 9 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces This guide describes the use of reference photographs depicting the appearance of unpainted, rusted carbon steel prior to and after cleaning by wet abrasive blast cleaning (WAB or Slurry blasting). The wet abrasive blast cleaning techniques and equipment are described in SSPC-TR 2/NACE 6G198. The reference photographs are intended to supplement the written standards SSPC-SP10/NACE No. 2, SSPC-SP-6/NACE No. 3, and ISO 8501-1 (E). This guide can be used to clarify the acceptable level of flash rusting allowed prior to the application of protective coatings. Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-sspc-vis-standards-p-2174.html Thu, 20 Jun 2024 17:14:10 +0000 USD 2174 DeFelsko 998 VIS https://www.abqindustrial.net/store/images/defelsko-sspc-vis-standards-prod.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s051-replacement-calcium-ion-sensor-3200772945-p-2172.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2172 ]]>Replacement sensor for Horiba LAQUATwin Meter Ca-11C Bovine Blood Calcium Meter # 3200772940 Requires a minimum of 0.3 ml sample volume Waterproof Horiba LAQUAtwin S051 Calcium Ion Sensor is Replacement sensor for Horiba LAQUATwin Meter Ca-11C Bovine Blood Calcium Meter # 3200772940 Features Replacement sensor for Horiba LAQUATwin Meter Ca-11C Bovine Blood Calcium Meter # 3200772940 Requires a minimum of 0.3 ml sample volume Waterproof Specifications Calcium Ion Concentration Range  0.1 to 5.0 mmol/L Liquid Junction Porous macromolecule Minimum Sample Required 0.3 ml  Temperature Sensor Built-in Operating Temperature Range 5° to 40 °C Downloads Horiba LAQUAtwin S051 Calcium Ion Sensor - Data Sheet Horiba LAQUAtwin S051 Calcium Ion Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s051-replacement-calcium-ion-sensor-3200772945-p-2172.html Mon, 25 Mar 2024 21:12:39 +0000 USD 2172 Horiba 1000 S051 https://www.abqindustrial.net/store/images/horiba-laquatwin-s051-calcium-ion-sensor.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s060-f-replacement-fluoride-sensor-3200934450-p-2171.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2171 ]]>Replacement sensor for Horiba LAQUAtwin F-11 Compact Water Quality pH Meter Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) Sensor guard has a sliding cap for scooping water sample The Horiba LAQUAtwin S060-F Fluoride Sensor is replacement sensor for Horiba LAQUAtwin F-11 Compact Water Quality pH Meter. Features Replacement sensor for Horiba LAQUAtwin F-11 Compact Water Quality pH Meter Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) Sensor guard has a sliding cap for scooping water sample Waterproof Specifications Minimum sample volume 0.3 ml (0.05 ml with Sampling Sheet B) Operating temperature / humidity 5 to 40.0 ⁰C / ≤ 85% in relative humidity (no condensation) Related Products Horiba LAQUAtwin F-11 Compact Water Quality pH Meter Revolutionary Fluoride Ion Analysis Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s060-f-replacement-fluoride-sensor-3200934450-p-2171.html Mon, 25 Mar 2024 21:10:42 +0000 USD 2171 Horiba 1000 S060 https://www.abqindustrial.net/store/images/horiba-laquatwin-s060-f-fluoride-sensor.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s060-orp-replacement-orp-sensor-3200997083-p-2170.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2170 ]]>Replacement sensor for Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) Sensor guard has a sliding cap for scooping water sample The Horiba LAQUAtwin S060-ORP ORP Sensor is replacement sensor for Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter. Features Replacement sensor for Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) Sensor guard has a sliding cap for scooping water sample Waterproof Specifications Minimum sample volume 0.3 ml (0.05 ml with Sampling Sheet B) ORP range / resolution -1000 to 1000 mV / 1 mV Operating temperature / humidity 5 to 40.0 ⁰C / ≤ 85% in relative humidity (no condensation) Related Products Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter Versatile Measurement Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-s060-orp-replacement-orp-sensor-3200997083-p-2170.html Mon, 25 Mar 2024 21:11:07 +0000 USD 2170 Horiba 1000 S060-ORP https://www.abqindustrial.net/store/images/horiba-laquatwin-s060-orp-sensor.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-f-11-compact-water-quality-fluoride-meter-3200858466-p-2169.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2169 ]]>Revolutionary Fluoride Ion Analysis Micro-Sample Measurement Capabilities Extensive Measurement Range The Horiba LAQUAtwin F-11 Compact Water Quality Fluoride Meter is unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop. Kit Contents Horiba LAQUAtwin F-11 Compact Water Quality Fluoride Meter 1ppm and 10ppm fluoride ion standard solutions (14 ml each) TISAB solution (14 ml) 5-ml plastic beaker Batteries Syringe 5 sampling sheets Features Revolutionary Fluoride Ion Analysis: Be a part of history with the world’s first and only pocket-sized fluoride ion meter. Micro-Sample Measurement Capabilities: The replaceable sensor, featuring a lanthanum trifluoride crystal, allows measurements in samples as small as 0.3 ml (or 0.1 ml with a sampling sheet). Extensive Measurement Range: Covering 0.1 to 990 ppm or mg/L, the meter delivers accurate fluoride ion readings. Unmatched Accuracy: With an accuracy of 2% of the actual value, the meter ensures reliable results for your analyses. Convenient Two-Point Auto Calibration: Achieve accuracy with two-point calibration, as the meter automatically recognizes and calibrates 1 ppm and 10 ppm fluoride ion standard solutions included in the kit. Customize calibration using other standard solutions that are ten-fold apart in concentration. Multiplying Compensation Function: Considering sample dilution in the reading, the meter features a multiplying compensation function to calculate the correct concentration. Auto Stable & Auto Hold Measurement Modes: Assisting users record stable readings, the meter displays smiley indicator and can freeze the reading. Temperature Calibration: Displaying temperatures up to 50.0°C, the meter allows for temperature correction through its calibration function. IP67 Rating: Waterproof and dustproof meter with digital LCD and backlit display Specifications Measurement principle Ion selective electrode Minimum sample volume 0.3 ml (0.01 ml with sampling sheet B) Measurement range  0.1 to 990 ppm (mg/L) Resolution 0.1 to 9.9 ppm: 0.1 ppm 10 to 99 ppm: 1 ppm 100 to 990 ppm: 10 ppm Accuracy ± 2% of actual value Maximum calibration points 2 Temperature display / resolution 0 to 50.0 ⁰C / 0.1 ⁰C Functions Automatic standard recognition Changeable Low and High calibration values Temperature calibration Multiplying compensation (0.01 to 9.90) Auto hold / Auto stable measurement modes Automatic power off (30 mins.) Low battery indicator IP67 water / dust proof Replaceable sensor Display Custom (monochrome) digital LCD with backlight Operating temperature / humidity 5 to 40.0 ⁰C / ≤ 85% in relative humidity (no condensation) Battery life Approx. 400 hrs. continuous use without backlight Materials ABS epoxy body / LaF3 crystal sensor Dimensions 164 x 29 x 20 mm (excluding projections) Mass Approx. 55g (including sensor and batteries) Accessories included 1 & 10 ppm fluoride standards (14 ml each), TISAB (14 ml), 5-ml beaker, sampling sheet B (5 pcs), syringe, CR2032 batteries (2 pcs), instruction & quick manuals, storage case Related Products Horiba LAQUAtwin S060-F Fluoride Sensor Replacement sensor for Horiba LAQUAtwin F-11 Compact Water Quality pH Meter Downloads Horiba LAQUAtwin F-11 Compact Water Quality pH Meter - Data Shee Horiba LAQUAtwin F-11 Compact Water Quality pH Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-f-11-compact-water-quality-fluoride-meter-3200858466-p-2169.html Mon, 10 Jun 2024 01:49:37 +0000 USD 2169 Horiba 997 F-11 https://www.abqindustrial.net/store/images/horiba-laquatwin-f-11-compact-water-quality-ph-meter.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-orp-11-compact-water-quality-orp-meter-3200965260-p-2168.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2168 ]]>Versatile Measurement Precision in Every Drop Wide Measurement Range The Horiba LAQUAtwin ORP-11 Compact Water Quality ORP Meter is unique compact meter integrates the electrode, display and sample container to enable simple, effective on-site testing by direct measurement from a single drop. Kit Contents Horiba LAQUAtwin ORP-11 Compact Water Quality ORP Meter 225 mV ORP standard solution (14 ml) Abrasive cotton swab for platinum disk polishing Dropper Batteries 5 sampling sheets Features Versatile Measurement: The only pocket-sized ORP meter that can measure not only ORP value, but also Eh value (voltage reading vs. the Standard Hydrogen Electrode or SHE) Precision in Every Drop: The replaceable sensor, featuring a platinum disk, enables measurements in samples as little as 0.3 ml (or 0.05 ml with sampling sheet). Wide Measurement Range: Covering -1000 mV to 1000 mV, the meter ensures accurate readings across a broad spectrum. Easy One-Point Auto Calibration: The meter automatically recognizes and calibrates the 225 mV standard solution included in the kit. Customize calibration using other ORP standard solution. Exceptional accuracy: With an accuracy of +/- 2mV, the meter delivers precise results every time. Auto Stable & Auto Hold Measurement Modes: Assisting users record stable readings, the meter displays smiley indicator and can freeze the reading. Temperature Compensation and Calibration: Displaying temperatures up to 50.0°C, the meter allows for temperature compensation as well as correction through its calibration function. IP67 Rating: Waterproof and dustproof meter with digital LCD and backlit display Specifications Measurement principle ORP electrode Minimum sample volume 0.3 ml (0.05 ml with Sampling Sheet B) ORP range / resolution -1000 to 1000 mV / 1 mV Accuracy ± 2 mV Maximum calibration points 1 Temperature display / resolution 0 to 50.0 ⁰C / 0.1 ⁰C Functions ORP and Eh measurements Automatic standard recognition Auto / Custom calibration value Temperature compensation Temperature calibration Auto hold / Auto stable measurement modes Automatic power off (30 mins.) Low battery indicator IP67 water / dustproof Replaceable sensor Display Custom (monochrome) digital LCD with backlight Operating temperature / humidity 5 to 40.0 ⁰C / ≤ 85% in relative humidity (no condensation) Battery life Approx. 400 hrs. continuous use without backlight Materials ABS epoxy body / platinum disk sensor Dimensions 164 x 29 x 20 mm (excluding projections) Mass Approx. 55g (including sensor and batteries) Related Products Horiba LAQUAtwin S060-ORP ORP Sensor Replacement sensor for Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter Downloads Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter - Data Shee Horiba LAQUAtwin ORP-11 Compact Water Quality pH Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-orp-11-compact-water-quality-orp-meter-3200965260-p-2168.html Mon, 10 Jun 2024 01:40:48 +0000 USD 2168 Horiba 998 ORP https://www.abqindustrial.net/store/images/horiba-laquatwin-orp-11-compact-water-quality-ph-meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-htx-30-all-purpose-thermo-hygrometer-p-2167.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2167 ]]>The next generation of moisture meters is here, with the introduction of the Navigator™ Series and EDGE ™app from Delmhorst The Delmhorst HTX-30 All-Purpose Thermo-Hygrometer is the latest product from the Delmhorst® Navigator® meter family. The hand-held Delmhorst HTX-30 All-Purpose Thermo-Hygrometer has a quick response time, simple interface and provides useful statistics, making it the ideal tool for measuring air conditions in water damage restoration, building inspections, flooring installations and many other industrial and research applications. The Delmhorst HTX-30 All-Purpose Thermo-Hygrometer measures Temperature and Relative Humidity. The meter calculates Vapor Pressure, Dewpoint, and Mixing Ratio. Through Bluetooth® Low Energy technology, the Delmhorst HTX-30 All-Purpose Thermo-Hygrometer can connect to the EDGE™ app and share saved readings for further analysis. The EDGE™ app gives users the option to add names to each location and designate them as a location/room or dehumidifier. Additionally, users will be able to add notes to individual readings, view and filter all readings, and export readings to a CSV file. The Delmhorst HTX-30 All-Purpose Thermo-Hygrometer makes the most challenging projects easier, less costly, and more efficient. Kit Contents Delmhorst HTX-30 All-Purpose Thermo-Hygrometer Delmhorst HTX-30 All-Purpose Thermo-Hygrometer Case Delmhorst HTX-30/P01 All-Purpose Thermo-Hygrometer Delmhorst HTX-30 All-Purpose Thermo-Hygrometer Delmhorst RH/T-XE RH/T Sensor Delmhorst RH/T-C2 RH Extension Cable Case Features Delmhorst® EDGE™ app with Bluetooth® connectivity Large, dashboard-like custom display with auto backlight – easy to read under all conditions 3.5 mm probe connector for easy and durable connection Measures Relative Humidity (%RH)  Temperature (°F, °C) Calculates Vapor Pressure (PSI, kPa) Mixing Ratio (GPP, GPK) Dewpoint (°F, °C) Settings Customize Read Screen Measurements Bluetooth Set Location Number (1-30) Display Brightness Display Contrast Display Backlight Display Timeout Statistics On-screen readings statistics – High, Low, Average, Standard Deviation, view readings Statistics can be filtered by location Date and time of measurement Includes sturdy plastic carrying case Includes 1 RH/T probe, and 1 extension cable Meter Powered by 2 x AA batteries QR code on meter for easy access to support materials Size: meter only - 8.6in (220mm) x 2.9in (74MM) x 1.6in (41mm); in carry case - 10.5in (266.7mm) x 7.0in (177.8mm) x 2.5in (64mm) Weight: meter only - (with batteries): 7.3oz (207g); in carry case weight: 13.6oz (386g) Hard plastic carrying case - included 2-year warranty on manufacturer defects. Bonus extend warranty with meter with on-line registration Accessories Delmhorst RH/T-XE Extended Probe Detachable, extended length sensor (2.5 in) for measuring Relative Humidity and Temperature. Useful for determining the psychrometric conditions in the output of dehumidifiers or other recessed areas. Connects via 3.5mm TRRS cable for easy and durable connection.Order individually or in packs of 5. Delmhorst RH/T-C2 Extension Cable 3 foot long extension cable that connects the HTX-30 to the Short Probe or Long Probe, allowing users to view their meter screen while taking measurements in hard-to-reach areas Downloads Delmhorst HTX-30 All-Purpose Thermo-Hygrometer - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-htx-30-all-purpose-thermo-hygrometer-p-2167.html Sat, 11 May 2024 09:04:36 +0000 USD 2167 Delmhorst 1000 HTX-30 https://www.abqindustrial.net/store/images/delmhorst-htx-30-all-purpose-thermo-hygrometer.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdhcbrsh5-half-circle-brush-electrodes-p-2166.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2166 ]]>Good for pipes 50 to 127 mm / 2 to 5 inches For DeFelsko PosiTest HHD Neoprene half-circle brush electrode for DeFelsko PosiTest HHD series - good for pipes 50 to 127 mm / 2 to 5 inches. Specifications HHDHCBRSH5 Half-Circle Neoprene Brush for 50-127 mm/2-5" pipe OD Accessories DeFelsko HHDFANBRSH Replacement Fan Brush Electrode Stainless steel - 5 cm (2") DeFelsko Electrode Adaptors ConConnect to spring and brush electrodes from other manufacturers - choose between PCWI, Tinker & Rasor, and 266 & 280 adaptors (adaptor not required for SPY electrodes) HHDPCWIADPT PCWI Adaptor HHDTRADPT Tinker & Rasor Adaptor HHD266ADPT 266 & 280 Adaptor DeFelsko HHDCOUPLER Spring Couplers Thread onto rolling springs and attach to the Spring Connector Please Note:  All rolling spring electrodes include two pre-installed spring couplers. Replacement spring couplers are not intended for connecting multiple rolling spring electrodes together. DeFelsko HHDCONNECT Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdhcbrsh5-half-circle-brush-electrodes-p-2166.html Fri, 22 Mar 2024 22:38:19 +0000 USD 2166 DeFelsko 1000 HHDHCBRSH5 https://www.abqindustrial.net/store/images/defelsko-hhdhcbrsh5-half-circle-brush-electrodes.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdfltbrsh-flat-wire-brush-electrodes-p-2165.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2165 ]]>Assorted sizes available: 5 to 120 cm (2 - 48") For DeFelsko PosiTest HHD series Stainless steel flat wire brush electrodes for DeFelsko PosiTest HHD series - assorted sizes available: 5 to 120 cm (2 - 48") Specifications HHDFLTBRSH2 HHD Flat Brush 51 mm/2" HHDFLTBRSH6 HHD Flat Brush 152 mm/6" HHDFLTBRSH8 HHD Flat Brush 203 mm/8" HHDFLTBRSH12 HHD Flat Brush 305 mm/12" HHDFLTBRSH24 HHD Flat Brush 610 mm/24" HHDFLTBRSH36 HHD Flat Brush 914 mm/36" HHDFLTBRSH48 HHD Flat Brush 1219 mm/48" Accessories DeFelsko HHDFANBRSH Replacement Fan Brush Electrode Stainless steel - 5 cm (2") DeFelsko Electrode Adaptors ConConnect to spring and brush electrodes from other manufacturers - choose between PCWI, Tinker & Rasor, and 266 & 280 adaptors (adaptor not required for SPY electrodes) HHDPCWIADPT PCWI Adaptor HHDTRADPT Tinker & Rasor Adaptor HHD266ADPT 266 & 280 Adaptor DeFelsko HHDCOUPLER Spring Couplers Thread onto rolling springs and attach to the Spring Connector Please Note:  All rolling spring electrodes include two pre-installed spring couplers. Replacement spring couplers are not intended for connecting multiple rolling spring electrodes together. DeFelsko HHDCONNECT Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdfltbrsh-flat-wire-brush-electrodes-p-2165.html Fri, 22 Mar 2024 22:34:08 +0000 USD 2165 DeFelsko 993 HHDFLTBRSH https://www.abqindustrial.net/store/images/defelsko-hhdfltbrsh-flat-wire-brush-electrodes.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdspring-rolling-spring-electrodes-p-2164.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2164 ]]>Includes two pre-installed spring couplers For DeFelsko PosiTest HHD Steel pipe electrodes for DeFelsko PosiTest HHD series - assorted sizes available: 10 to 91 cm (4 - 36") Rolling springs include two pre-installed spring couplers Specifications HHDSPRING4 Rolling Spring Coil for 4" pipe (102 mm) OD HHDSPRING6 Rolling Spring Coil for 6" pipe (152 mm) OD HHDSPRING8 Rolling Spring Coil for 8" pipe (203 mm) OD HHDSPRING12 Rolling Spring Coil for 12" pipe (304 mm) OD HHDSPRING14 Rolling Spring Coil for 14" pipe (356 mm) OD HHDSPRING16 Rolling Spring Coil for 16" pipe (406 mm) OD HHDSPRING20 Rolling Spring Coil for 20" pipe (508 mm) OD HHDSPRING24 Rolling Spring Coil for 24" pipe (610 mm) OD Please Note:Each spring includes two pre-installed spring couplers. A spring connector (HHDCONNECT) is required to attach the DeFelsko PosiTest HHD to the spring couplers. Custom sizes and bulk pricing available. Additional couplers (HHDCOUPLER - 2 pack) are available. Accessories DeFelsko HHDFANBRSH Replacement Fan Brush Electrode Stainless steel - 5 cm (2") DeFelsko Electrode Adaptors ConConnect to spring and brush electrodes from other manufacturers - choose between PCWI, Tinker & Rasor, and 266 & 280 adaptors (adaptor not required for SPY electrodes) HHDPCWIADPT PCWI Adaptor HHDTRADPT Tinker & Rasor Adaptor HHD266ADPT 266 & 280 Adaptor DeFelsko HHDCOUPLER Spring Couplers Thread onto rolling springs and attach to the Spring Connector Please Note:  All rolling spring electrodes include two pre-installed spring couplers. Replacement spring couplers are not intended for connecting multiple rolling spring electrodes together. DeFelsko HHDCONNECT Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdspring-rolling-spring-electrodes-p-2164.html Fri, 22 Mar 2024 22:33:55 +0000 USD 2164 DeFelsko 1000 HHDSPRING https://www.abqindustrial.net/store/images/defelsko-hhdspring-rolling-spring-electrodes.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-aluminum-4-sided-wet-film-thickness-gage-p-2163.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2163 ]]>Economical aluminum construction Convenient 5.7 x 8.25 cm (2.25" x 3.25") card format Can be discarded, kept as a record of film thickness, or cleaned and reused Notched Wet Film Thickness Gages measure the thickness of paint, enamels, and other wet films quickly and accurately 30-notch wet film gages for measuring up to 2,000 μm or 80 mils Conforms to ISO 2808, ASTM D4414, AS/NZS 1580.107.3, JIS K 5600-1-7, NF T30-125, US NAVY NSI 009-32 and others Features Economical aluminum construction Convenient 5.7 x 8.25 cm (2.25" x 3.25") card format Can be discarded, kept as a record of film thickness, or cleaned and reused Sold in packs of 10 Select from microns or mils Specifications Order Code Range WFG2000AL10PK 25 - 2,000 μm WFG80AL10PK 1 - 80 mils Downloads DeFelsko Aluminum 4-sided Wet Film Thickness Gage - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-aluminum-4-sided-wet-film-thickness-gage-p-2163.html Wed, 06 Mar 2024 22:56:14 +0000 USD 2163 DeFelsko 979 WFTK https://www.abqindustrial.net/store/images/defelsko-aluminum-4-sided-wet-film-thickness-gage.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-stainless-6-sided-wet-film-thickness-gage-p-2162.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2162 ]]>Durable stainless steel construction Select from 6 measurement ranges Imperial versions include features for confirming 1/16" & 1/8" edge radius and edge chamfers (NACE SP0178, PA Guide 11) Notched Wet Film Thickness Gages measure the thickness of paint, enamels, and other wet films quickly and accurately 24- or 36- notch wet film gages for measuring up to 3,000 μm or 120 mils of coating Conforms to ISO 2808, ASTM D4414, AS/NZS 1580.107.3, JIS K 5600-1-7, NF T30-125, US NAVY NSI 009-32 and others Features Durable stainless steel construction Select from 6 measurement ranges Imperial versions include features for confirming 1/16" & 1/8" edge radius and edge chamfers (NACE SP0178, PA Guide 11) Metric versions include a notch for confirming 2 mm edge radius (ISO 8501-3) Includes compact hard-shell storage case and pictorial instruction card Specifications Order Code Range WFG370SS 20–370 μm WFG2000SS 25–2,000 μm WFG3000SS 25–3,000 μm WFG15SS 0.5–15 mils WFG80SS 1–80 mils WFG120SS 1–120 mils Downloads DeFelsko Stainless 6-sided Wet Film Thickness Gage - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-stainless-6-sided-wet-film-thickness-gage-p-2162.html Wed, 06 Mar 2024 22:56:17 +0000 USD 2162 DeFelsko 990 WFTS https://www.abqindustrial.net/store/images/defelsko-stainless-6-sided-wet-film-thickness-gage.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-certified-stainless-8-sided-wet-film-thickness-gage-p-2161.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2161 ]]>Durable stainless steel construction Includes Certificate of Accuracy 40 notches for superior resolution - 5 notches per side Notched Wet Film Thickness Gages measure the thickness of paint, enamels, and other wet films quickly and accurately Dual-head design measures up to 1,500 μm of coating on one side and 60 mils of coating on the reverse Conforms to ISO 2808, ASTM D4414, AS/NZS 1580.107.3, JIS K 5600-1-7, NF T30-125, US NAVY NSI 009-32 and others Features Durable stainless steel construction Includes Certificate of Accuracy 40 notches for superior resolution - 5 notches per side Two-sided - Microns and Mils Includes compact hard-shell storage case and pictorial instruction card Specifications Order Code Range WFG60/1500SSC 1 - 60 mils | 25 - 1,500 μm Downloads DeFelsko Certified Stainless 8-Sided Wet Film Thickness Gage - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/defelsko-certified-stainless-8-sided-wet-film-thickness-gage-p-2161.html Wed, 06 Mar 2024 22:56:10 +0000 USD 2161 DeFelsko 995 WFG60/1500SSC https://www.abqindustrial.net/store/images/defelsko-wfg60-1500ssc-wet-film-thickness-gage.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-positest-hhd-verifier-p-2160.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2160 ]]>Ideal for field / laboratory verification of pulse or continuous DC holiday detectors Wide measurement range Simple two step operation DeFelsko PosiTest HHD Verifier standalone voltmeter (crest meter, jeep meter) for verifying the accuracy and operation of pulse or continuous type DC holiday detectors. Ideal for field/laboratory verification of the PosiTest HHD High voltage Holiday Detector series. Kit Contents DeFelsko PosiTest HHD Verifier Batteries Instructions Long Form Certificate of Calibration traceable to NIST Two year warranty Features Ideal for field / laboratory verification of pulse or continuous DC holiday detectors Wide measurement range Simple two step operation Lightweight / Portable - requires no external power sources Certificates of Calibration showing traceability to NIST included Two year warranty Made in USA Specifications   Product DeFelsko PosiTest HHD Verifier DeFelsko PosiTest HHD C Verifier Order Code HHDVERIFY HHDCVERIFY Voltage Range 0.5 – 35 kV 0.5 – 30 kV Resolution 0.5 kV – 1 kV: 10 Volt Steps >1 kV: 100 Volt Steps Accuracy ±5% Operating Temperature -20° to 60° C (-4° to 140° F) Operation IMPORTANT: Before using the PosiTest HHD / HHD C Verifier, ensure that a proper ground is established between the holiday detector and the verifier. Before using the verifier, ensure that a proper ground is established between the holiday detector and the verifier. Ensure that the ground lead is plugged into the PosiTest HHD C Verifier and that the other end of the ground lead is connected to the ground lead of the high voltage holiday detector that is being verified. Turn the verifier on by pressing and releasing the power button. Once powered on, the verifier continuously monitors the voltage on the Probe Tip. The voltage displayed on the verifier should match the voltage displayed by the detector within the combined tolerance of both units. For DC holiday detectors such as the PosiTest HHD and PosiTest HHD C, the verifier probe tip can be left connected to an exposed electrode indefinitely with no concern. For best results, try to position the verifier probe perpendicular (90°) to the electrode on the holiday detector. Related Products DeFelsko HHDKIT PosiTest HHD Kit High Voltage Holiday Detector Strobe light and loud audible alarms emitted when a holiday is detected. Audio alarm mode can be adjusted for differing DeFelsko HHDKITB PosiTest HHD Basic Kit High Voltage Holiday Detector Ready to measure - comes with everything needed for testing DeFelsko HHDCKIT PosiTest HHD C High Voltage Holiday Detector Lightweight, one-piece ergonomic design provides comfortable all-day use, reducing operator fatigue Downloads DeFelsko PosiTest HHDVERIFY Verifier - Data Sheet DeFelsko PosiTest HHDVERIFY Verifier - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-positest-hhd-verifier-p-2160.html Thu, 14 Mar 2024 19:26:14 +0000 USD 2160 DeFelsko 1000 HHD-V https://www.abqindustrial.net/store/images/defelsko-positest-hhd-verifier.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ctp-wme-contact-temperature-probe-p-2159.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2159 ]]>Use with Tramex TREMS-WME-MC Remote Environmental Monitoring System, Tramex CS-RHTX Ambient and Probe Cloud Sensors The Tramex CTP-WME Contact Temperature Probe is a plug-in accessory probe used with the TREMS Cloud Sensors to measure and log surface temperature over time. Used alongside the Humidity sensor functions in the TREMS Cloud Sensors and WME, dew point circumstances can be easily identified. Kit Contents Tramex CTP-WME Contact Temperature Probe Features Use with Tramex TREMS-WME-MC Remote Environmental Monitoring System, Tramex CS-RHTX Ambient and Probe Cloud Sensors Specifications Units ºC (ºF) Temperature Range -30°C to +80°C (-20°F to +175°F) Accuracy ±0.5°C from -10°C to +85°C (±0.9oF from 14oF to 185oF) Resolution 0.1% over the complete range Related Products Tramex TREMS-WME-MC Remote Environmental Monitoring System Allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Additionally, the system enables ambient temperature and relative humidity monitoring to ensure optimal environmental conditions Tramex CS-RHTX Ambient and Probe Cloud Sensors Wireless Ambient Temperature and Humidity Sensor Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ctp-wme-contact-temperature-probe-p-2159.html Sun, 04 Feb 2024 15:08:26 +0000 USD 2159 Tramex 1000 CTP-WME https://www.abqindustrial.net/store/images/tramex-ctp-wme-contact-temperature-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-wme-cloud-sensor-wme-probe-p-2158.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2158 ]]>Remotely monitor In-situ Wood Moisture Equivalent, WME, & Moisture Content, MC When used with the Tramex TREMS-WME-MC Remote Environmental Monitoring System, the Cloud Sensor WME Probe allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Kit Contents Tramex CS-WME Cloud Sensor WME Probe Features Use With Tramex TREMS-WME-MC Remote Environmental Monitoring System Specifications Wood Moisture Equivalent (WME/MC) 0 - 100 Related Products Tramex TREMS-WME-MC Remote Environmental Monitoring System Allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Additionally, the system enables ambient temperature and relative humidity monitoring to ensure optimal environmental conditions Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-wme-cloud-sensor-wme-probe-p-2158.html Sun, 04 Feb 2024 14:55:34 +0000 USD 2158 Tramex 1000 CS-WME https://www.abqindustrial.net/store/images/tramex-cs-wme-cloud-sensor-wme-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-rhtx-ambient-and-probe-cloud-sensors-p-2157.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2157 ]]>Wireless Ambient Temperature and Humidity Sensor For use with Trems Tramex Remote Environmental Monitoring System The Tramex CS-RHTX Ambient and Probe Cloud Sensors is on-site Cloud Sensors, with long-life batteries, transmit ambient and in in-situ relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex CS-RHTX Ambient and Probe Cloud Sensors are compatible with the range of Tramex relative humidity probes, the Tramex TREMS-WME/MC pin probes, and the CTP-WME contact temperature probe. Sensors can be easily registered by scanning the QR code on the back of the instrument and clicking ‘register’ in your Cloud account. Kit Contents Tramex CS-RHTX Ambient & Probe Cloud Sensor Features Use with Trems Tramex Remote Environmental Monitoring System Specifications Temperature Sensor Specifications Exceptional Accuracy ±0.1 °C Range 20°C to 60°C (±0.1°F Range 68°F to 140°F) Range -40°C to 125°C  (-40°F to 257°F) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-rhtx-ambient-and-probe-cloud-sensors-p-2157.html Sat, 10 Feb 2024 01:26:22 +0000 USD 2157 Tramex 1000 CS-RHTX https://www.abqindustrial.net/store/images/tramex-cs-rhtx-ambient-and-probe-cloud-sensor.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-rhta-cloud-sensors-ambient-p-2156.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2156 ]]>Wireless Ambient Temperature and Humidity Sensor Use With TREMS Tramex RemoteEnvironmental Monitoring System The Tramex CS-RHTA Cloud Sensors Ambient is on-site Cloud Sensors, with long-life batteries, transmit ambient relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex CS-RHTA Cloud Sensors Ambientare compatible with the CTPcontact temperature probe. Sensors can be easily registered by scanning the QR code on the back of the instrument and clicking ‘register’ in your Cloud account. Kit Contents Tramex CS-RHTA Cloud Sensors Ambient Features Use With TREMS Tramex RemoteEnvironmental Monitoring System Specifications Temperature Sensor Specifications Exeptional Accuracy ±0.1 °C Range 20°C to 60°C (±0.1ºF Range 68ºF to 140ºF) Range -40ºC to 125ºC (-40ºF to 257ºF) Sensor Protection PTFE Film protects sensor opening from water & dust Drift < 0.03ºC (0.04ºF) per year  Relative Humidity Sensor Specifications Exceptional Accuracy ±1.5%RH Range 0% to 80%RH, ±2.0%RH Range 80% to 99%RH (@ 25ºC (77ºF)) Range 0 to 100%RH Resolution 0.1% over the complete range Drift < 0.25%RH per year Sensor Specifications Transmission Range Over 3kms line-of-sight Communication Frequency Multiple readings per hour. Identification Items individually coded for ease of install and logging identification. Size 100mm x 90mm x35mm (3.94” x 3.54” x 1.38”) Weight 100g (3.53oz) Construction ABS enclosure Power Built in CR123A battery with up to 15 year lifespan Included Wall Mounting Related Products Tramex TREMS Remote Environmental Monitoring System With Secure Momitoring Software Ambient relative humidity and temperature Remote Environmental Monitoring System Tramex TREMS-XTRA Remote Environmental Monitoring System Xtra Monitor Ambient and In-situ Temperature and Relative Humidity remotely With Secure Monitoring Software Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available Tramex TREMS-WME-MC Remote Environmental Monitoring System Allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Additionally, the system enables ambient temperature and relative humidity monitoring to ensure optimal environmental conditions Downloads Tramex Remote Environmental Monitoring System Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cs-rhta-cloud-sensors-ambient-p-2156.html Fri, 02 Feb 2024 22:27:27 +0000 USD 2156 Tramex 1000 CS-RHTA https://www.abqindustrial.net/store/images/tramex-cs-rhta-cloud-sensors-ambient.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cst-4g-cloud-station-router-p-2155.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2155 ]]>For use with TRAMEX TREMS Remote Environmental Monitoring System The Tramex CST-4G Cloud Station Router enables remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. The Cloud Station can be easily registered by scanning the QR code on the back of the instrument and clicking "register" in your Cloud account. Kit Contents Tramex CST-4G Cloud Station Features Use with TRAMEX TREMS Remote Environmental Monitoring System Specifications Frequency Region Specific frequency available Security WPA2-PSK encryption, no unwarranted telemetry/tracking. Size 150mm x 90mm x 50mm (5.9” x 3.6” x 2”) Weight 280g (9.9oz) Power Universal AC Power Adapter Construction Wall-mountable ABS enclosure Related Products Tramex TREMS Remote Environmental Monitoring System With Secure Momitoring Software Ambient relative humidity and temperature Remote Environmental Monitoring System Tramex TREMS-XTRA Remote Environmental Monitoring System Xtra Monitor Ambient and In-situ Temperature and Relative Humidity remotely With Secure Monitoring Software Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available Tramex TREMS-WME-MC Remote Environmental Monitoring System Allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Additionally, the system enables ambient temperature and relative humidity monitoring to ensure optimal environmental conditions Downloads Tramex Remote Environmental Monitoring System Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-cst-4g-cloud-station-router-p-2155.html Fri, 02 Feb 2024 21:52:44 +0000 USD 2155 Tramex 1000 CST-4G https://www.abqindustrial.net/store/images/tramex-cst-4g-cloud-station.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ap-trems-wme-mc-remote-environmental-monitoring-system-wme-mc-accessory-pack-p-2154.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2154 ]]>Ambient Relative Humidity and Temperature WME Reference 1-100 Remote Environmental Monitoring System Cloud The Tramex AP-TREMS-WME-MC Remote Environmental Monitoring System Wme/Mc Accessory Pack adds more Cloud Sensors to your TREMS project. The Tramex AP-TREMS-WME-MC Remote Environmental Monitoring System Wme/Mc Accessory Pack comprises 5 CS-RHTX Tramex Cloud Sensors as well as 5 external WME/MC probes. These external probes extend the benefits of the remote monitoring system allowing for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Multiple Sensors can be used with one Station. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with long-life batteries, transmit relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings, in-situ WME and MC readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data with the Tramex Remote Environmental Monitoring System. Kit Contents 5 x CS-RHTX Tramex Cloud Sensors 5 x WME/MC electrode probes 1 x Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Features Ambient Relative Humidity and Temperature WME Reference 1-100 Remote Environmental Monitoring System Cloud Specifications Cloud Xtra Sensor Temperature Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ap-trems-wme-mc-remote-environmental-monitoring-system-wme-mc-accessory-pack-p-2154.html Fri, 02 Feb 2024 14:38:29 +0000 USD 2154 Tramex 1000 AP-TREMS-WME-MC https://www.abqindustrial.net/store/images/tramex-ap-trems-wme-mc-remote-environmental-monitoring-system-wme-mc-accessory-pack.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ap-trems-xtra-remote-environmental-monitoring-system-xtra-accessory-pack-p-2153.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2153 ]]>Ambient Relative Humidity and Temperature In-Situ Ambient Relative Humidity and Temperature Remote Environmental Monitoring System Cloud The Tramex AP-TREMS-XTRA Remote Environmental Monitoring System Xtra Accessory Pack adds more Cloud Sensors to your TREMS project. The Tramex AP-TREMS-XTRA Remote Environmental Monitoring System Xtra Accessory Pack comprises 5 CS-RHTX Tramex Cloud Sensors as well as 5 external Relative Humidity probes. These external probes extend the benefits of the remote monitoring system allowing for in-situ readings within building structures cavities in walls and ceilings and in situ RH readings in concrete. Multiple Sensors can be used with one Station. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with long-life batteries, transmit relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data with the Tramex Remote Environmental Monitoring System. Kit Contents 5 x CS-RHTX Tramex Cloud Sensors 5 x External Relative Humidity probes for in-situ 1 x Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Features Ambient Relative Humidity and Temperature In-Situ Ambient Relative Humidity and Temperature Remote Environmental Monitoring System Cloud Specifications Cloud Xtra Sensor Temperature Sensor Specifications Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift < 0.04ºF (0.03ºC) per year  Relative Humidity Sensor Specifications Exceptional Accuracy ±1.5%RH Range 0% to 80%RH, ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC)) Range 0 to 100%RH Resolution 0.1% over the complete range Drift < 0.25%RH per year Sensor Specifications Transmission Range Up to 2 miles line-of-sight Communication Frequency Multiple readings per hour. Identification Items individually coded for ease of install and logging identification. Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power Built in CR123A battery with up to 15 year lifespan Included Wall Mounting Relative Humidity Sensor Temperature Sensor Specifications Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift < 0.04ºF (0.03ºC) per year  Relative Humidity Sensor Specifications Exceptional Accuracy ±1.5%RH Range 0% to 80%RH, ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC)) Range 0 to 100%RH Resolution 0.1% over the complete range Drift < 0.25%RH per year Kit Specifications Size 17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm) Weight 7.6lbs (3.56kg) Power 5 x CR123A 3-volt batteries (included) Related Products Tramex TREMS-XTRA Remote Environmental Monitoring System Xtra Monitor Ambient and In-situ Temperature and Relative Humidity remotely With Secure Monitoring Software Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available Downloads Tramex AP-TREMS-XTRA Remote Environmental Monitoring System Xtra Accessory Pack - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-ap-trems-xtra-remote-environmental-monitoring-system-xtra-accessory-pack-p-2153.html Fri, 02 Feb 2024 02:38:59 +0000 USD 2153 Tramex 1000 AP-TREMS-XTRA https://www.abqindustrial.net/store/images/tramex-ap-trems-xtra-remote-environmental-monitoring-system-xtra-accessory-pack.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-trems-wme-mc-remote-environmental-monitoring-system-p-2152.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2152 ]]>Ambient Relative Humidity and Temperature WME Reference 1-100 Remote Environmental Monitoring System Cloud The Tramex TREMS-WME-MC Remote Environmental Monitoring System allows for Moisture Content (%MC) monitoring in wood and Wood Moisture Equivalent (WME) monitoring in a variety of building materials such as wood-based products, drywall or plasterboard. Additionally, the system enables ambient temperature and relative humidity monitoring to ensure optimal environmental conditions. Designed and developed by Tramex, this state of the art technology can notify users allowing for quick response to in-situ and environmental changes. The Tramex TREMS-WME-MC Remote Environmental Monitoring System kit comprises a Tramex Cloud Station router, 5 CS-RHTX Tramex Cloud Sensors for ambient conditions, and 5 external WME/MC probes. Multiple Sensors can be used with one Station and additional Sensor and WME/MC probe Accessory Packs are also available, meeting your specific monitoring requirements. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with long-life batteries, transmit relative humidity, temperature (ºC and ºF), dew point, grains per pound / grams per kilo and WME/MC readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data with the Tramex Remote Environmental Monitoring System WME/MC. Kit Contents 5 x CS-RHTX Tramex Cloud Sensors 5 x WME/MC electrode probes 1 x Tramex Cloud Station 1 x Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Antennae for Cloud Station Features Ambient Relative Humidity and Temperature WME Reference 1-100 Remote Environmental Monitoring System Cloud Specifications Cloud Xtra Sensor Temperature Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-trems-wme-mc-remote-environmental-monitoring-system-p-2152.html Fri, 02 Feb 2024 15:21:43 +0000 USD 2152 Tramex 1000 TREMS-WME-MC https://www.abqindustrial.net/store/images/tramex-trems-wme-mc-remote-environmental-monitoring-system.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cmp-concrete-moisture-probe-p-2151.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2151 ]]>Instant and Accurate Designed to work in the same drill-hole made for the F2170 test Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests The Tramex CMP Concrete Moisture Probe - a.k.a. "The Determinator", measures the in-situ moisture content within a concrete floor or slab. This Tramex CMP Concrete Moisture Probe is used with a concrete moisture meter from the Tramex Concrete Moisture Encounter range, the Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter, Tramex CMEX5 Concrete Moisture Encounter X5 as well as previous versions of Tramex Concrete Moisture Meters, the CME4 and CMEX2. The Tramex CMP Concrete Moisture Probe provides in-situ Moisture Content readings in a Tramex Unified Concrete Moisture Test Method - quantitative Moisture Content measurements are taken in both the top ¾ inch layer and within the body of concrete floors and slabs down to an extendable depth of up to 4" (100mm) and a Diameter 3/4" (19mm). The Determinator helps determine if moisture within the concrete slab is originating from below, within or above the slab. This information can be essential in establishing the next step in fixing moisture problems in a concrete slab. The Tramex CMP Concrete Moisture Probe can only be used with a Tramex Concrete Moisture Meter. It does not work alone. Tramex CMP Concrete Moisture Probe Design The Tramex CMP Concrete Moisture Probe when used with Tramex Concrete Moisture Encounter instruments operates on the principle that the electrical impedance of a material varies with its moisture content. The CME instrument is pressed onto the Tramex CMP Concrete Moisture Probe cradle which is pressed onto the material surface with the pins fully compressed and the probe inserted into the pre-drilled 3/4" (19mm) hole to measure the moisture content. The electrical impedance is measured by creating a low frequency alternating electric field between the electrodes and the probe, to a depth of up to 4" (10cm). This field penetrates the material under test. The very small alternating current flowing through the field is inversely proportional to the impedance of the material. The instrument detects this current, determines its amplitude and thus derives the moisture value. Tramex CMP Concrete Moisture Probe - Operating Procedure The Determinator cradle should be flat on the slab surface and the Tramex Concrete Moisture Meter placed and firmly pressed onto the cradle with the pins fully compressed.The probe reads from the bottom, within the body of the slab, up to the surface. Kit Contents Tramex CMP Concrete Moisture Probe Operating Instructions One (1) year warranty Features Instant and Accurate Designed to work in the same drill-hole made for the F2170 test. Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests. Determine if moisture is coming from below or above the concrete slab surface. Determine the type and extent of mitigation if needed. Reusable, Extendable, and requires no plastic hole liners. Can be used in conjunction with Tramex Concrete Moisture Encounters CME5, CMEX5, (CME4 and CMEX2) Specifications Size 17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm) Weight 5.7 lbs (2.6kg)  Power ABS Body Moisture Content for Concrete with Tramex CMEX5 and CMEX2 0 - 6.9% Moisture Content for Concrete with Tramex CME5 and CME4 0 - 6% Depth of Penetration 1 1/4" probe depth for concrete between 2" to 4" | 2 1/4" probe depth for concrete between 4" to 6" | 3 1/4" probe depth for concrete between 6" to 9" | 4 1/4" probe depth for concrete between 9" to 11 Related Products Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately3/4" into the slab. Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Tramex CDTK Concrete Determinator Tech Kit Compact Moisture Meter Kit For Measuring Surface and In Situ Moisture Content Of Concrete Floors and Slabs Tramex CDIK Concrete Determinator Inspector Kit A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. Tramex CDK Concrete Determinator Moisture Probe Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration Downloads Tramex CMP Concrete Moisture Probe - Data Sheet Tramex CMP Concrete Moisture Probe - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cmp-concrete-moisture-probe-p-2151.html Fri, 09 Feb 2024 14:33:37 +0000 USD 2151 Tramex 999 CMP https://www.abqindustrial.net/store/images/tramex-cmp-concrete-moisture-probe.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/plt-5000-adap-spare-screw-in-contact-adapter-for-plt-5000-p-2150.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2150 ]]>Spare Screw-In Contact Adapter for PLT-5000 Spare Screw-In Contact Adapter for PLT-5000 Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/plt-5000-adap-spare-screw-in-contact-adapter-for-plt-5000-p-2150.html Tue, 05 Dec 2023 21:29:48 +0000 USD 2150 Checkline 1000 PLT-5000-ADAP https://www.abqindustrial.net/store/images/plt-5000-adap-spare-screw-in-contact-adapter-for-plt-5000.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/cdt-adap-tw-welding-wire-feed-speed-meter-adapter-p-2149.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2149 ]]>Welding Wire Speed Adapter For use on Welding Wire Diameter Range of 0.032" - 0.120" (0.8 to 3.0mm) For use on Welding Wire Diameter Range of 0.032" - 0.120" (0.8 to 3.0mm). Accurately measure the linear feed speed of welding wire using the new CDT-ADAP-TW Welding Wire Feed Speed Meter / Adapter accessory. Designed for use with our CDT-2000HD Handheld Laser Tachometer, this accessory is specifically-designed for measurement of unstressed welding wire with a diameter range of 0.032" - 0.120" (0.8 to 3.0mm). It features an all-metal construction designed for trouble-free use even in the toughest production environments. Designed and fabricated in Germany, the CDT-ADAP-TW Welding Wire Feed Speed Meter / Adapter slides onto the end of the CDT-2000HD Handheld Laser Tachometer extending its standard "Tachometer Functions", offering a world class solution for welding wire feeding speed measurement. Operation is simple and requires no training. The wire is placed between the rollers by pressing the top to release the jaws. As soon as the wire feed is triggered, the speed is measured and recorded on the digital display. ​The CDT-2000HD Handheld Laser Tachometer is a Combination Portable Tachometer combining the best features of both contact and non-contact measurement models to accurately measure RPM, surface speed and length. The CDT-2000HD Handheld Laser Tachometer is covered by a 5-Year warranty. Features For use on Welding Wire Diameter Range of 0.032" - 0.120" (0.8 to 3.0mm) Wire Speed can be measured in any of the following user-selected units: m/min, ft/min, in/min Total Length can also be measured and displayed (in Meters, Feet or Inches) Spring-loading and ball-bearing mounted contact roller eliminates slip and makes for highest possible accuracy Accuracy Class of 0.02% of reading Designed and fabricated in Germany Related Products CDT-2000HD Handheld Laser Tachometer Measurement of wires, cables and ropes up to 8 mm Used for elevator applications and similar applications for measure cable speed and length Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/cdt-adap-tw-welding-wire-feed-speed-meter-adapter-p-2149.html Tue, 05 Dec 2023 21:20:49 +0000 USD 2149 Checkline 1000 CDT-ADAP-TW https://www.abqindustrial.net/store/images/cdt-adap-tw-welding-wire-feed-speed-meter-adapter.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/cdt-adap-cs20-wire-cable-and-rope-speed-adaptor-p-2148.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2148 ]]>Wire, Cable, and Rope Speed Adaptor Measurement of wires, cables and ropes up to 8 mm When attached to the CDT-2000HD Handheld Laser Tachometer the CDT-ADAP-CS20 Wire, Cable, and Rope Speed Adaptor allows the device to measure speed and length of wires, cables and ropes up to 8 mm diameter, e.g.in elevator applications. The CDT-2000HD Handheld Laser Tachometer and CDT-ADAP-CS20 Wire, Cable, and Rope Speed Adaptor is just as useful when setting up plants and machinery as during service jobs, monitoring manufacturing processes or in development laboratories. Example applications include measuring the rotational speeds of engines, pumps and turbines, as well as of mixers, centrifuges and conveyors; it can also measure the velocities and lengths of all kinds of threads, sheets and belts Features Measurement of wires, cables and ropes up to 8 mm Used for elevator applications and similar applications for measure cable speed and length Wrapper roller mounted beside main roller insures adequate contact to eliminate slippage CDT-ADAP-CS20 is ordered as an accessory and requires use with CDT-2000HD Tachometer Specifications Measurement Diameter Up to 8mm Related Products CDT-2000HD Handheld Laser Tachometer Measurement of wires, cables and ropes up to 8 mm Used for elevator applications and similar applications for measure cable speed and length Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/cdt-adap-cs20-wire-cable-and-rope-speed-adaptor-p-2148.html Tue, 05 Dec 2023 20:44:40 +0000 USD 2148 Checkline 1000 CDT-ADAP-CS20 https://www.abqindustrial.net/store/images/checkline-cdt-adap-cs20-wire-cable-rope-speed-adaptor.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/lma-3-12-inch-circumference-knurled-aluminum-measuring-wheel-p-2147.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2147 ]]>For use with models: DT-107A-12, DLM M4x8 ISO 4026 hex socket set screw The LMA-3 12" Circumference Knurled Aluminum Measuring Wheel is for use with models: DT-105A - DT-107A Handheld Tachometers, DLM-107A Digital Length Meter. Features M4x8 ISO 4026 hex socket set screw Related Products DT-105A - DT-107A Handheld Tachometers Built-in memory for last, maximum, minimum and 10 separate readings DLM-107A Digital Length Meter Digital Length Meter Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/lma-3-12-inch-circumference-knurled-aluminum-measuring-wheel-p-2147.html Tue, 05 Dec 2023 10:07:26 +0000 USD 2147 Checkline 1000 LMA-3 https://www.abqindustrial.net/store/images/lma-3-12-circumference-knurled-aluminum-measuring-wheel.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/mitutoyo-gb-gauge-blocks-p-2146.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2146 ]]>Extend the measuring range of a benchtop thickness gauge with a precision gauge block Includes NIST Traceable Certificate of Inspection The Mitutoyo GB Gauge Blocks is extend the measuring range of a benchtop thickness gauge with a precision gauge block. Features Includes NIST Traceable Certificate of Inspection ASME Grade AS-1 Steel Related Products MTG Material Thickness Gauge for Textiles, Non-wovens, Fabrics & Soft Materials Range: 0-1 inch (0-25 mm) TMG Universal Benchtop Material Thickness Gauge - ASTM / DIN / EN / ISO Standards Various configurations to measure according to ASTM, DIN, EN & ISO Standards Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/mitutoyo-gb-gauge-blocks-p-2146.html Mon, 04 Dec 2023 22:41:01 +0000 USD 2146 Mitutoyo 999 GB https://www.abqindustrial.net/store/images/gb-gauge-blocks.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/erichsen-p-i-g-455-wedge-cut-coating-thickness-gauge-p-2145.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2145 ]]>Measurement of non-identified coating materials Exchangeable cutter formed of carbide metal Tilt-free cutting guide The ElektroPhysik P.I.G. 455 Wedge Cut Coating Thickness Gauge is a universal coating thickness gauge utilizing the wedge cut method to measure organic coatings on metal, wood, and synthetic material. The P.I.G. is also suitable for multiple coatings. Measurement of non-identified coating materials Measurement on all coatable base materials (wood, synthetic material, metal, etc.) Exchangeable cutter formed of carbide metal Tilt-free cutting guide Integrated microscope with precision vernier Features Measurement of unknown layer materials Measurement of unknown layer materials Exchangeable cutter made of hard metal Controlled guiding of the cutting operation without tilting Integrated microscope with precision vernier Specifications Range No. 1: 20 µm - 2,000 µm | No. 4: 10 µm - 1,000 µm | No. 5: 5 µm - 500 µm | No. 6: 2 µm - 200 µm Cutting angle α No. 1: 45 ° | No. 4: 26.6 ° | No. 5: 14 ° | No. 6: 5.7 ° Factor (μm/sc.div.) No. 1: 20 | No. 4: 10 | No. 5: 5 | No. 6: 2 Measuring accuracy 1 % Battery 2x Mignon AA Dimensions 110 mm x 85 mm x 25 mm Weight 400g Related Products Erichsen Paint Borer 518 MC Coating Thickness Gauge Measuring ranges up to 2000 micron / 78 mils Downloads Erichsen P.I.G. 455 Wedge Cut Coating Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/erichsen-p-i-g-455-wedge-cut-coating-thickness-gauge-p-2145.html Mon, 04 Dec 2023 17:05:51 +0000 USD 2145 Erichsen 1000 PIG-455 https://www.abqindustrial.net/store/images/elektrophysik-pig-455-wedge-cut-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-2-digital-pit-gauge-p-2144.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2144 ]]>MM/IN - Switch between mm and inch measurements ON/OFF - Now just move the slide to turn unit On/Auto/Off IP54 protection level for water spray, dust, etc. The NDT DPG-2 Digital Pit Gauge with IP54, designed based on digital vernier caliper with direct reading, is easy to use and provides fast and accurate measurements of surface pits, gauges, dents, undercuts, etc. The NDT DPG-2 Digital Pit Gauge is made of hardened stainless steel, and its 0.2' (0.5mm) probe diameter will access even the smallest pits. A data output interface makes it possible to connect with a PC or data logger for collecting and analyzing measurements. The DPG-2 is a unique Pit Gauge, based on a Direct Reading Digital Vernier Caliper. The DPG-2 is easy-to-use and provides fast and accurate measurements of surface pits, gauges, dents, undercut, etc. The DPG-2 is made in hardened stainless steel and its 0.050" (1.2 mm) diameter probe, will access even the smallest pits. Waterproof Seal Kit Contents NDT DPG-2 Digital Pit Gauge IP54 protective module for protection from water-spray, dusts and oil. Hard Storage Case Features MM/IN - Switch between mm and inch measurements ON/OFF - Now just move the slide to turn unit On/Auto/Off. ZERO - Set "0" at any position IP54 protection level for water spray, dust, etc. Accuracy of +/- 0.001" Can measure up to a 1.18" depth Made of hardened stainless steel 0.050" diameter probe Specifications Range 1.25 in | 30mm Resolution 0.0004 in | 0.01mm Permissible Error +/- 0.001 in | +/- 0.03mm Measuring Speed ≤ 1.5 m/sec. Working Temperature 0-40 °C Working Relative Humidity ≤ 80% Storage Temperature -10-60 °C Power One Button Battery 1.55 V, LR44 / A76 Warranty 1-year Downloads NDT DPG-2 Digital Pit Gauge - Data Sheet NDT DPG-2 Digital Pit Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-2-digital-pit-gauge-p-2144.html Fri, 14 Jun 2024 11:56:42 +0000 USD 2144 NDT 990 DPG-2 https://www.abqindustrial.net/store/images/berg-dpg-2-digital-pit-gauge.jpg https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-4-m-pit-gauge-kit-with-new-magnetic-v-groove-base-p-2143.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2143 ]]>Spring Loaded Digital Pit Gauge with 3 Bases: Magnetic 4 7/8" V-Groove Base, 4 7/8" Knife Edge Base both with Center and Cantilever Positions, Standard 2 3/8" Knife Edge Base The NDT DPG-4/M Pit Gauge Kit with New Magnetic V-Groove Base is the new and improved spring loaded digital pit gauge featuring an exchangeable magnetic 4 7/8" V-groove base with center and cantilever positions in addition to two knife edge bases: the standard 2 3/8" long base and a 4 7/8" long base with two positions. With the magnetic V-groove base you can easily hold the gauge in any vertical, flat or overhead position, and the three bases ensure maximum versatility. Simple to use, the NDT DPG-4/M Pit Gauge Kit with New Magnetic V-Groove Base is water resistant and made of hardened stainless steel, producing accurate measurements of surface pits, gauges, dents, undercuts and more. Only 0.050" in diameter, the probe can access even the smallest pits. Kit Contents Spring Loaded Digital Pit Gauge Standard 2 3/8" Knife Edge Base Two Position 4 7/8" Knife Edge Base Two Position 4 7/8" Magnetic V-Groove Base Two Sets of Attachment Screws Hard Storage Case Features Magnetic 4 7/8" V-Groove Base with center and cantilever positions that holds the gauge in any position - vertical, flat, or overhead 2 Exchangeable Knife Edge Bases: Standard 2 3/8" long base and a 4 7/8" long base with center and cantilever positions IP54 protection level for water spray, dust, etc. Accuracy of +/- 0.001" Can measure up to a 1.18" depth Made of hardened stainless steel Spring Loaded, 0.050" diameter probe Can zero at any position Button to switch between inches and mm 1 Year Limited Warranty Specifications Range 0 - 125" (0 - 30mm) Resolution 0.001" (0.025mm) Accuracy ±0.001" (0.025mm) Protection IP-54 Temperature Range 32°F - 105°F (0°C - 40°C) Relative Humidity 80% Storage Temperature 14°F - 140°F (-10°C - 60°C) Power One (1) 1.55V Button Battery Knife Base 2 3/8" and 4 7/8" (60 and 125mm) Magnetic "V" Groove base 4 7/8" (125mm) Downloads NDT DPG-4/M Pit Gauge Kit with New Magnetic V-Groove Base - Data Sheet NDT DPG-4/M Pit Gauge Kit with New Magnetic V-Groove Base - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-4-m-pit-gauge-kit-with-new-magnetic-v-groove-base-p-2143.html Fri, 14 Jun 2024 11:56:44 +0000 USD 2143 NDT 999 DPG-4/M https://www.abqindustrial.net/store/images/berg-dpg-4m-pit-gauge-kit-with-new-magnetic-v-groove-base.jpg https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-3-enhanced-digital-pit-depth-gauge-p-2142.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2142 ]]>2 Exchangeable Knife Edge Bases IP54 protection level for water spray, dust, etc. Accuracy of +/- 0.001" The NDT DPG-3 Enhanced Digital Pit Depth Gauge is the new and improved spring loaded digital pit gauge with two exchangeable knife edge bases: a standard 2 3/8" long base and a 4 7/8" long base with center and cantilever positions for versatility based on your needs. Simple to use, the NDT DPG-3 Enhanced Digital Pit Depth Gauge is water resistant and made of hardened stainless steel, producing accurate measurements of surface pits, gauges, dents, undercuts and more. Only 0.050" in diameter, the probe can access even the smallest pits. Kit Contents Spring Loaded Digital Pit Gauge Standard 2 3/8" Long Base Two Position 4 7/8" Long Base Two Sets of Attachment Screws Hard Storage Case Features 2 Exchangeable Knife Edge Bases: Standard 2 3/8" long base and a 4 7/8" long base with center and cantilever positions IP54 protection level for water spray, dust, etc. Accuracy of +/- 0.001" Can measure up to a 1.18" depth Made of hardened stainless steel Spring Loaded, 0.050" diameter probe Can zero at any position Button to switch between inches and mm 1 Year Limited Warranty Specifications Resolution 0.0004" (0.01 mm) Range 0-1.18" (0-30 mm) Accuracy 0.001" (0.03 mm) Protection Level IP54 Measuring Speed ≤ 1.5 m/sec. Standard Knife Edge Base Size 2 3/8" Long Two Position Knife Edge Base Size 4 7/8" Long with Center and Cantilever Positions Working Temperature 0-40 °C Working Relative Humidity ≤ 80% Storage Temperature -10-60 °C Power One Button 1.55 V Battery  Downloads NDT DPG-3 Enhanced Digital Pit Depth Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/ndt-dpg-3-enhanced-digital-pit-depth-gauge-p-2142.html Fri, 14 Jun 2024 11:56:43 +0000 USD 2142 NDT 994 DPG-3 https://www.abqindustrial.net/store/images/berg-dpg-3-enhanced-digital-pit-depth-gauge.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-barotation-automatic-o-ring-hardness-and-thickness-tester-p-2141.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2141 ]]>Time saving Automatic evaluation Batch dependent settings The Bareiss BaRotation Automatic O-Ring Hardness And Thickness Tester is successfully improved the testing capacity of the instrument through the automatic turntable and positioning by measuring the time and procedures required for a single product. It is equipped with a high-performance laser module to accurately locate the highest point or middle point of the O-ring, and then The O-ring is automatically taken to the hardness test area for testing by laser positioning. All procedures are suitable for small batch and multi-style testing needs. Hardness determination on soft rubber, highly elastic materials, soft deformable materials (e.g., thin-wall O-Rings). Features Time saving Automatic evaluation Batch dependent settings Descending speed of ⅛"/s Specifications Range of application Hardness determination on soft rubber, highly elastic materials, soft deformable materials (e.g. thin-wall O-Rings) Standards DIN ISO 48, ASTM D 1415, NFT 46-003, BS903 Part. A 26 Measuring principle IRHD Mikro | M Shore A The indenter of the instrument penetrates the specimen from the surface. This indentation depth provides the hardness information of the test specimen. Memory Memory for 300 measured values Plug-in power supply 100-240V; 50-60 Hz Data output RS 232 (Serial) Dimensions 450mm x 450mm x 365mm Weight 30kg Downloads Bareiss BaRotation Automatic O-Ring Hardness And Thickness Tester - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-barotation-automatic-o-ring-hardness-and-thickness-tester-p-2141.html Tue, 05 Dec 2023 23:53:00 +0000 USD 2141 Bareiss 1000 BaRotation https://www.abqindustrial.net/store/images/bareiss-barotation-automatic-o-ring-hardness-and-thickness-tester.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-abrasion-tester-rubber-hardness-abrasion-testing-instruments-p-2140.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2140 ]]>Abrasion tester for rubber products such as tires, conveyor belts, tubes, shoe soles, floor coatings, etc. The Bareiss Abrasion Tester Rubber Hardness Abrasion Testing Instruments isinvolves the determination of volume loss due to the abrasive against a test piece when it rubs over a specified grade of abrasion paper. To evaluate the abrasion resistance of rubber materials like, tires, conveyor belts, automotive belts, hoses, footwear, or a multitude of other products , we need to test them under abrasive conditions. The actual performance of rubber products during their performance cycle cannot always be predicted and therefore the Bareiss Abrasion Tester acts as the auxiliary testing equipment for standard determination of the hardness of elastomers against abrasion Kit Contents A sample holder (rotating) Various Loading Weights Rotating cylindrical roller Emery sheet Electrical Control Optional: An automatic vacuum cleaner connection and an optional heating module. Specifications Abrasion Tester Dimensions of the test piece Ø16 mm x 6 mm to Ø16 mm x 15 mm Span length of the test piece Maximum 13 mm Clamping force of test piece (standard) 2.5 N; 5.0 N; 7.5 N; 10.0 N Abrasion path / rotations of the roller 20 m / 42 R (rotations) - 40 m / 84 R Speed of rotating test piece 0.9 RPM Speed of roller 40 RPM Feed 4.2 mm/R Peripheral speed 0.32 m/s Angle of inclination of sample holder 3° Roller diameter 150 mm Roller width 460 mm Complies With DIN ISO 4649, NF ISO 4649, ASTM D 5963 Emery Sheet Dimensions 472.5 (-0/+2) x 400.0 mm Grain size 60 Additional Weight 10 N Clamping force of test piece 12.5 N; 15.0 N; 17.5 N; 20.0 N Abrasion Tester Standard Fe05000 Dimensions when packed (WxDxH) 750 x 650 x 500 mm Weight when packed approx. 85 kg Dimensions when unpacked (WxDxH) 780 x 400 x 350 / 750 mm (closed / open) Weight when unpacked approx. 50 kg Electrical connection data (operation) 100 - 240 V 50 / 60 Hz 50 VA Abrasion Tester Automatic Vacuum Cleaner Connection Fe05000-01 Dimensions when packed (WxDxH) 750 x 650 x 500 mm Weight when packed approx. 85 kg Dimensions when unpacked (WxDxH) 780 x 400 x 350 / 750 mm (closed / open) Weight when unpacked approx. 50 kg Electrical connection data (operation) 100 - 240 V 50 / 60 Hz 50 VA + vacuum cleaner power Abrasion Tester Heating Module Fe05000-02 Dimensions when packed (WxDxH) 750 x 650 x 500 mm Weight when packed approx. 90 kg Dimensions when unpacked (WxDxH) 780 x 600 x 350 / 750 mm (closed / open) Weight when unpacked approx. 55 kg Electrical connection data (operation) 100 - 240 V 50 / 60 Hz 2100 VA Product Usage The abrasion tester is switched on with the POWER rotary switch and the protective hood is opened. The test piece is fixed on the sample holder and the protective hood is closed. The automatic standard abrasion process can be interrupted any time by pressing the STOP button. Start the abrasion process with the START button. After the set abrasion path is traversed, the abrasion tester is switched off automatically, and the protective hood is opened. The sample is taken out from the sample holder is bought back to its base position and the protective hood is closed. Switch off the abrasion tester with the POWER rotary switch after reaching the activated lift and finally, the measuring device moves back to its initial position. The recommended lift is 2.0 mm. Downloads Bareiss Abrasion Tester Rubber Hardness Abrasion Testing Instruments - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-abrasion-tester-rubber-hardness-abrasion-testing-instruments-p-2140.html Thu, 30 Nov 2023 21:06:55 +0000 USD 2140 Bareiss 1000 ABM-DIN https://www.abqindustrial.net/store/images/bareiss-abrasion-tester-rubber-hardness-abrasion-testing-instruments.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-ball-rebound-tester-polymer-foams-tester-p-2139.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2139 ]]>Ball Rebound Tester Polymer Foams Tester Footwear Rebound Resilience Tester Aside from testing the resilience of materials such as foam, polyurethane and other similar materials, the Bareiss Ball Rebound Tester - Polymer Foams Tester is a popular quality control device being used by many of the leading hybrid Mattress Manufacturers around the World. How else could we count on the best sleep possible if our mattress was not perfected using a Bareiss Resilience Tester? Another division that relies on the Bareiss rebound resilience tester is the footwear industry. Whether it is for high-end athletic footwear or everyday shoes, we all know what comfort means to our feet! The elasticity of polymeric foam materials can be analyzed with a Bareiss Ball Rebound Tester, by measuring the rebound height of a ball after the free fall and impact on a test specimen. The 2-line LC display shows the measuring value and the median value in %. The rebound height is electronically determined through sensors. Thanks to a magnetic holder, the ball remains securely adjusted until the start of the measuring process before it is manually released with the help of the handwheel. Kit Contents EKST test stand Downpipe EKF 500 – the height of fall 500 mm Pick up bracket, magnetic steel ball with holder Electronic unit Specifications Measuring Principle A Ø16 mm magnetic steel ball falls freely onto the sample from a specified height of 500 mm. Standardsw DIN EN ISO 8307, ASTM D 3574 Official DAkkS-Calibration Certificate Works-Calibration certificate for 500mm ball rebound Software Hard Test For Windows System for data logging and analysis Power supply Flange power supply set INPUT : 100-240VAC; 50/60 Hz OUTPUT : 3.3 VDC Measuring range 0 - 100% Dimensions Test stand with down pipe: 200 x 250 x 450 mm Electronic unit: 200 x 172 x 80 mm Data output RS 232 (Serial) Weight 8.5 kg Usage Guide Single measurement with mode 0 The electronic unit is switched off and the encoded switch is turned to position 0 using a screwdriver. The clamping screw of the fixing bracket is loosened so that the downpipe is up until there is a distance between the downpipe and the sample placed on the supporting table. Push down the pipe carefully until the foot is in contact with the sample and tighten the clamping screw. Turn the knurled wheel carefully to the left until it stops and put the ball with the help of a magnet holder onto the holder plate and turn the knurled wheel carefully to the right until it stops. The ball is set free and falls onto the sample, take the ball out with the help of a magnetic holder. The measured value is transmitted via the interface to the computer. Measurement acc. DIN EN ISO 8307 with mode 1 (median value) According to norm 3 measurements are made on 3 samples each and one median value is calculated from each series of measurements and one median value is calculated from the 3 median values. The electronic unit is switched off and the encoded switch is turned to position 1 using a screwdriver. 3 readings on 3 samples are measured and the median is displayed. Once 3 median values are obtained the final median value is displayed. The measured median value is transmitted via the interface to the computer. Measurement with pre-measurements in mode 2 (median value) The electronic unit is switched off and the encoded switch is turned to position 2 using a screwdriver. 3 measurements are taken for preconditioning and repeat the measurements twice. Once preconditioning values are obtained, 3 values are obtained from 3 samples each and the final median value is calculated. The measured median value is transmitted via the interface to the computer. Measurement acc. ASTM D 3574 with mode 3 (average value) The electronic unit is switched off and the encoded switch is turned to position 3 using a screwdriver. According to norm 3 measurements are made on 3 samples each and one average value is calculated from each series of the measurement and one average value is calculated from the three average values. 3 readings on 3 samples are measured and the average is displayed. Once 3 average values are obtained the final average value is displayed. The measured average value is transmitted via the interface to the computer. Measurement with pre-measurements in mode 4 (average value) The electronic unit is switched off and the encoded switch is turned to position 4 using a screwdriver. 3 measurements are taken for preconditioning and repeat the measurements twice. Once preconditioning values are obtained, 3 average values are obtained from 3 samples each and the final average value is calculated. The measured average value is transmitted via the interface to the computer. Application Test Method Ball Ø (mm) Ball Mass (g) Height of fall (mm) Operating modes Single measurement Mode 0 Acc. To DIN EN ISO 8307 9 measurements on 3 samples 3 median values are taken, and the final median value is selected 16 ± 0.5 16.8 ± 1.5 500 ± 0.5 Mode 1 6 measurements 3 pre-measurements for conditioning The median value of 3 measurements is selected Mode 2 Acc. To ASTM D 3574 9 measurements on 3 samples 3 average values are taken, and the final average value is selected 16.03 ± 0.2 500 ± 0.2 Mode 3 6 measurements 3 pre-measurements for conditioning The average value of 3 measurements is selected Mode 4 Downloads Bareiss Ball Rebound Tester - Polymer Foams Tester - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-ball-rebound-tester-polymer-foams-tester-p-2139.html Thu, 30 Nov 2023 20:24:02 +0000 USD 2139 Bareiss 1000 BRT https://www.abqindustrial.net/store/images/bareiss-ball-rebound-tester-polymer-foams-tester.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-gelomat-automatic-capsule-hardness-tester-p-2138.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2138 ]]>Fully automatic gelatin capsule digital hardness test system FDA 21 CFR Part 11 Compliant with a 3-Q Validation Report The Bareiss GELOMAT Automatic Capsule Hardness Tester is a fully automatic and modular digital hardness tester commonly used by many of the leading pharmaceutical vitamins and even paintball companies around the world. In today’s increasingly interconnected and highly regulated global markets, adherence to ‘critical-to-quality’ attributes is required to deliver best-in-class products. To prevent defective capsules from reaching the market, these companies are relying on a reliable capsule hardness tester to apply a compressive force to the gelatin capsules to confirm they have sufficient wall strength to withstand external forces during manufacturing, storage, packaging, transport, and finally when used by a consumer. Features User-Friendly: This automatic shore hardness tester is equipped with an electronic unit that can show user information, time, and method of measurement, and is equipped with various other configurations along with automatic measurement of time and range detection. Mechanism: The measuring devices (0-20N & 0-2N) have an easy plug-and-play solution with no complex mechanism. The measuring devices can easily be fastened by hand using the knurled nut and the electronic unit can easily detect the device once it is set up. Complexity: Gelatin capsules of different shapes can easily be tested using different manual & automatic fixtures. It is FDA 21 CFR Part 11 compliant and comes with a 3-Q validation report ready as requested by customers. Specifications FDA 21 CFR Part 11 Compliant with a 3-Q Validation Report ISO/17025 ISO/17025 Accredited Calibration Certificate Available Technical Data Power supply 100-240VAC; 50/60 Hz Fuse 2 pieces of fine fuses 3.15 A slow (3.15 AT) Power consumption Max. 20VA Kind of protection IP 20 Display LCD – graphical display (240*128 Pixel) with LED Resolution   0.1 Lift 0.1 - 9.9 mm Data output USB/ RS 232- 9600 Baud, 1 start bit, 8 Data bits, 1 Stop bit Connections Pick-up bracket with measuring device Dimensions (L*W*H), weight Test stand: 200*250*535 mm 9.0 kgs Pick-up bracket: 165*135*60 mm 3.0 kgs Measuring device: 160*100*140 mm 1.7 kgs Electronic Unit: 258*260*100 mm 2.0 kgs Operating Procedures The electronic unit is switched on and the additional weights are loaded on the pickup bracket for the measuring load of range 0-20 N and no additional load is required for the measuring load of 0-2N. For Gelatin capsules centrofix fixture is used on the supporting table. Care must be taken to align the centrofix parallel to pick up bracket which is tightened with the help of knurled screws. The distance between the indenter and the centrofix should be adjusted up to 10 mm by loosening the clamping lever of the pickup bracket and pushing down carefully unit this distance is reached. The counter nut is loosened, and the knurled nut is rotated until the indenter is in the center of the template. The measurement is started by pressing the ‘Start’ button on the electronic unit and the measuring device is lowered onto the capsule automatically. After reaching the activated lift the measuring device moves back to its initial position. The recommended lift is 2.0 mm. The measured value is shown on the display and is transferred via the interface at the same time. Range Test Method Gelomat (0-20 N) Gelomat (0-2 N) Range of Application Determination of material hardening on gelatin capsules and elasticity Determination of gel stability and gel capacity, agar-agar Lift 2 mm 2 mm Indenter Ø 10 mm surface: 10 mm2 = Ø 3,75 mm Mode Standard Charge curve Flow curve Peak Standard Charge curve Flow curve Peak curve Peak Downloads Bareiss GELOMAT Automatic Capsule Hardness Tester - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/irhd-hardness-testers-c-105_89/bareiss-gelomat-automatic-capsule-hardness-tester-p-2138.html Thu, 30 Nov 2023 15:20:33 +0000 USD 2138 Bareiss 1000 GELOMAT https://www.abqindustrial.net/store/images/bareiss-gelomat-automatic-capsule-hardness-tester.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4100-asphalt-thickness-gauge-p-2137.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2137 ]]>Non-destructive measurement TP D-StB 12 approved Measuring range up to 400 mm The ElektroPhysik StratoTest-4100 Asphalt Thickness Gauge is designed for measuring the thickness of all non-metallic layers in the context of construction work, like bituminous mixtures (asphalt), blast furnace slag, concrete, etc. The measuring process is non-destructive and TP D-StB 12 approved (Technical testing regulations applicable for calculating surface thickness in road construction) to gauge individual and total thickness of layers in road construction. Use of the device in road constructions typically involves placing aluminum foil at the base of an asphalt layer yet to be applied. The foil gets packed in by the gravel mix and thus does not hamper the process of inter-layer bonding. Decades of experience have shown that the foils do not affect the stability of the asphalt layers. Unlike the core drill method, this does not damage the construction layer. The measuring reflectors can be located by a bar graph display on the measuring device or acoustically by the headphones included in the delivery. There are three kinds of probes available for special applications in the construction sector: N 100ST: Up to 100 mm to measure the covering layer in road construction N 400ST: Measuring range between 0 and 400 mm to measure the base and covering layers in road construction N 800ST: Up to 800mm Non-destructive thickness measurement of non-magnetic layers in the field of construction, e.g.: Asphalt, slag, gravel and concrete layers in road construction Concrete layers in landfill construction work Kit Contents StratoTest 4100 device Measuring probe N 400ST Foldable dolly for measuring Calibration plate Headphone 9 V bloc battery, type 6LR61 Plastic carrying case Features Non-destructive measurement TP D-StB 12 approved Measuring range up to 400 mm Direct display of thickness Unlimited measurements repeatedly at the same spot Easy location of the measuring reflectors Specifications Measuring Principle Eddy Current testing Measurable layers all non-metallic road layer materials Reflectors aluminium foils or sheets of different sizes Measuring Range 0 - 40 cm N400ST Standard Probe 0 - 10 cm N100ST Optional Probe 0 - 80 cm N800ST Optional Probe Resolution 0.1 cm @ 0 - 30 cm 0.2 cm @ 30 - 35 cm 0.4 cm @ 35 cm+ Tolerance of standard probe ± (0.1 cm +2 % of reading) @ 0 - 30 cm ± 2 % of reading @ 30 - 35 cm ± 2 % of reading @ 35 - 40 cm Display LCD Panel Data Memory DIRECT mode: approx. 500 single readings and statistical values SITE mode: approx. 6,000 single readings incl. statistics 5 site memories available with 300 stations each 4 measuring spots per station 5 layer material types per measuring spot Power supply 1 x 9 V alkaline battery Battery ~ 20 hours Ambient temperature gauge: 0 °C - 50 °C probe: 0 °C - 70 °C Downloads ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4100-asphalt-thickness-gauge-p-2137.html Mon, 27 Nov 2023 19:29:22 +0000 USD 2137 ElektroPhysik 1000 StratoTest-4100 https://www.abqindustrial.net/store/images/elektrophysik-stratotest-4100-asphalt-thickness-gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge-p-2136.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2136 ]]>Eddy current testing Non-destructive measurement Measuring range up to 300 mm The ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge is a hand-held instrument designed to measure the thickness of refractory linings in kilns used in cement and brick production. Instead of the traditional method of drilling approx. 200 holes for inspection, the StratoTest only requires one single borehole for calibration, and from that point on it measures the lining thickness non-invasively. The electromagnetic measuring process is non-destructive and without danger to the operator. StratoTest 4500 C allows the operator to determine the lining thickness of cement, dolomite, magnetite, or fireclay bricks in rotary kilns quickly and thus helps to significantly reduce inspection times and effort. Refractory bricks undergo degradation resulting in a decrease in mechanical properties. In order to monitor the thickness of these bricks, ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge is the ideal tool to determine the state of the lining in industrial furnaces and rotary kilns. ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge works on the electromagnetic measurement principle using the metal of the kiln shell as a measuring reflector. When the disc-shaped probe approaches the kiln shell, its electromagnetic files change depending on the distance to the metal. Kit Contents StratoTest 4500 control unit Measuring probe N 300ST Probe handle and connecting cable Carrying case for use on site Plastic transport case Features Non-destructive measurement Measuring range up to 300 mm Immediate display of brick thickness Special measuring technique to eliminate influences of metal inclusions or microstructural change Easy data transfer via USB and Bluetooth Specifications Measuring Principle Eddy Current testing Material to be Measured Electrically non-conducting refractory bricks (not suitable for sheet metal construction or reinforced refractory concrete) Measuring Range 0 - 30 cm N300ST standard probe Resolution 0.1 cm Display LCD Panel Data Memory DIRECT mode: limited to the size of SD card ZONE-SECTION mode: more than 1,000,000 individual readings and 9,801 separate measurement series StratoTest C generally groups reading in series of measurements in one memory batch. StratoTest C features one DIRECT memory and 99 Zone memories (Zone/ APPL) combined with 99 memories for series of measurements (Section / Batch). Power supply 3 x AA (LR05) battery Battery ~ 150 hours (working without display illumination) Ambient temperature gauge: 0 °C - 60 °C | probe: 0 °C - 70 °C Downloads ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge-p-2136.html Mon, 27 Nov 2023 19:29:33 +0000 USD 2136 ElektroPhysik 1000 StratoTest-4500-C https://www.abqindustrial.net/store/images/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-digi-chamber-r-temperature-controlled-hardness-testing-p-2135.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2135 ]]>Hardness Tester Rubber Hardness Tester Temperature Controlled Rubber Hardness Testing Instrument The Bareiss Digi-CHAMBER-R Temperature Controlled Hardness Testing is an “Environmental Chamber Rubber-Hardness tester” designed and developed by Bareiss that uses the most advanced technology to analyze the hardness of rubber under extreme conditions using Shore hardness A or IRHD N testing methods. This automatic testing device plays a major role in the automotive and tire industries as most of the rubber parts are required to sustain very extreme temperature variations. This multifeatured temperature-controlled hardness tester can carry out multiple tests simultaneously, making it one of the most popular testing devices in the market, also because of its reproducibility and accuracy of results it provides. Bareiss Digi-CHAMBER-R Temperature Controlled Hardness Testing uses digiCenter software which makes it more convenient to operate and function efficiently. It also provides multiple features like, user management, user-defined testing sequence, and criteria, customized test reports, and exporting the data according to user formats. Kit Contents Hardness scales interchangeable between Shore A and IRHD N 7” touch screen Electronic console A large testing chamber having a capacity up to 200 liters Air-cooled refrigeration unit Features Large display: This advanced automatic hardness testing device has a 7" display which is controlled by a touch screen panel, supporting multiple languages. User Friendly: This advanced testing device has a user-friendly interface that makes it more popular in the market, by minimizing the training time. This added value is important to many companies. It consists of an air-cooled refrigeration unit with continuously variable power adjustment by SIMPAC and a chloride-free refrigeration cycle. A large test volume of 200 liters with polished stainless-steel walls for a test load of up to 125 kgs. Easy to use an electronic display with digital I/O for controlling the hardness system. Special Feature: The automatic tray can carry up to 25 pcs of samples and the user can select a test sequence by choosing multiple measurements on a sample along with the desired temperature. Temperature: Under extreme cold temperatures, rubber becomes hardened, and this can be simulated in an environment as cold as -40 0C with digiChamber. Under extreme high heat conditions of up to +180 0C temperature, rubber can be analyzed with this automatic digiChamber. Software (digiCenter): For all data logging and analysis, digiCenter has a user-friendly GUI (Graphic User Interface) for users to easily navigate through the software and quickly become familiar with it Specifications Shore A hardness system Standards DIN ISO 48-4, ASTM D 2240 Spring force 8050 mN Force on the presser foot 1kg Presser foot size Ø 18mm Indenter 35" Penetration 2.5 mm IRHD N hardness system (optional) Standards DIN ISO 48-2, ASTM D 1415 Initial load 0.3 N Primary load 5.7 N Force on the presser foot 8.3 N Presser foot size Ø 20 mm Indenter Ø 2.5 mm Penetration 1.8 mm Temperature Chamber Temperature range -700 C to 1800 C Recommended max temperature 1500 C Temperature rate of change ±0.2 K to ±0.5 K Temperature homogeneity ±0.5 K to ±1.5 K Test volume Approximate 200 liters Heat compensation 800 W Noise level 56 dB(A) Refrigerant Chloride-free R449A Electrical and interfaces Voltage 100-240 VAC, 50/60 Hz; 12 A Power Approx. 1.8 kW Protection Class IP 54 USB 3.0 (1 port) Ethernet 100/10 megabit Compressed air Pressure 4- 12 bar Consumption max. 6m3/h Coupling type DN 7.2 Sample Geometry: O-rings; Sheet material Shaped; Parts and thin specimens Type Plate shape samples Standard Ø 38 mm / 50 mm others on request Downloads Bareiss Digi-CHAMBER-R Temperature Controlled Hardness Testing - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-digi-chamber-r-temperature-controlled-hardness-testing-p-2135.html Sun, 07 Jul 2024 14:56:52 +0000 USD 2135 Bareiss 1000 Digi-CHAMBER-R https://www.abqindustrial.net/store/images/bareiss-digi-chamber-r-temperature-controlled-hardness-testing.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/jaquet-mechanical-hand-tachometer-type-2200-p-2134.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2134 ]]>Made Switzerland 3 Step Scale Measures up to 20,000 RPM or 2000 meters per minute The classic Jaquet Mechanical Hand Tachometer to measure RPM and Meters Per Minute. This Swiss made measuring instrument is the preferred choice of industry professionals the world over. Kit Contents Jaquet Mechanical Hand Tachometer Type 2200 2 Small Cone Tips 1 Large Cone Tip 1 Funnel Tip Case Features Made Switzerland 3 Step Scale Measures up to 20,000 RPM or 2000 meters per minute Related Products Deumo MT-Series Mechanical Tachometer Measures speeds from as low as 16 rpm up to 50,000 rpm Accuracy of ±0.5% of Full Scale Rugged lightweight design for easy operation Measures Feet Per Minute (FPM) with included surface speed wheel Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/jaquet-mechanical-hand-tachometer-type-2200-p-2134.html Wed, 07 Feb 2024 20:02:58 +0000 USD 2134 Checkline 999 Jaquet https://www.abqindustrial.net/store/images/jaquet-mechanical-hand-tachometer-type-2200.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/cap-torque-testers-c-101_1/ctv-cap-torque-tester-verifier-p-2133.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2133 ]]>Clockwise & Counter-Clockwise Operation Calibration Certificate According to DIN ISO 6789 3 Models Ranges Available up to 10-50 lb-in / 509 cNm The CTV Cap Torque Tester Verifier is designed for quick testing and verification of digital, and analog cap torque testers. A bi-directional cam slips once the set torque is reached in either clockwise or counter-clockwise directions. Ideal for daily checks of cap torque tester operation. The CTV is designed for quick verification of operation, not for calibration. A large variation from the preset torque would indicate the need for recalibration of the torque tester. Features Clockwise & Counter-Clockwise Operation Includes Calibration Certificate According to DIN ISO 6789 Precision radial ball clutch and cam Ergonomic rubber grip Specifications Accuracy +/-6% in accordance with ISO 6789:2003 Warranty 1 Year Handle Diameter 1.41 in / 36 mm Related Products Mark-10 CAP-TT01 Cap Torque Tester With Data Output 6 Ranges up to 250 lb-in / 28 N-m Sampling rate 7,000 Hz Safe overload 150% of full scale Shimpo TNP Cap Torque Tester - Meter Memory for 1000 values with USB Output 3 Ranges up to 90 Lb-in Selectable units of measure: lbf-in, kgf-cm, N-m and N-cm Includes Hi/Go/Lo Limits and LED Indicators Imada CAP-DTXS Cap Torque Testers 3 Ranges up to 85 lb-in Selectable real time and peak modes Mark-10 AC1036 Calibration Kit for CAP-TT01 Cap Torque Tester Right-angle bench mounting bracket Cable with looped ends Attachment, cable to torque tester Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/cap-torque-testers-c-101_1/ctv-cap-torque-tester-verifier-p-2133.html Thu, 07 Dec 2023 04:14:34 +0000 USD 2133 Checkline 999 CTV https://www.abqindustrial.net/store/images/ctv-cap-torque-tester-verifier.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fg-mini-preset-torque-screwdrivers-p-2132.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2132 ]]>Accuracy and precision delivered for all fastening applications Engineered with a cam-over mechanism, the poka-yoke screwdriver prevents over torque Calibration life is 2x ISO standard for FG-25z models only The Mountz FG-Mini Preset Torque Screwdrivers is the most advanced hand tools in the world. Torque range suitable for micro, low, and medium torque applications. The small, ergonomic handle design perfectly fits the operator's hand and reduces fatigue during those extended assembly operations. The tool's compact size makes it versatile for applications with limited space access. Preset torque screwdrivers improve productivity by consistently applying the correct torque value to each fastener. They are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting. A preset screwdriver doesn't have an external torque adjustment scale. These tools have an internal torque adjustment mechanism for setting the torque value and preset using a hex key and a torque analyzer. The locking mechanism prevents accidental torque setting changes. Designed for industries where production errors aren't acceptable, poka-yoke torque screwdrivers prevent over-torque events. It doesn't require much force to over-torque miniature fasteners in critical applications for medical devices, aerospace instruments, or microelectronics. With our cam over clutch mechanism, the mini FG preset screwdriver allows engineers and operators to apply the correct torque value to any small fastener consistently and helps prevent costly over-torque events. Using preset tools ensures operators cannot tamper with driver settings on the assembly line. Quality-minded engineers can give Mountz FG tools to any operator and have the confidence that they will deliver the correct torque, time after time Features Tool Benefits Torque screwdriver prevents operators from influencing the torque output when tightening fasteners. Accuracy and precision are delivered for all fastening applications. Engineered with a cam-over mechanism, the poka-yoke screwdriver prevents over-torque. Advanced cam-over technology provides a completely smooth reset reducing the risk of users loosening fasteners or breakage. Calibration life 2x ISO standards A unique bearing system eliminates axial load and sideloads on the fastener applied by the operator. Unmatched security of the tamper-proof internal adjustment. No external adjustment scale - must be preset using a torque analyzer. The small, ergonomic handle design perfectly fits the operator's hand and reduces fatigue during those extended assembly operations. The tool's compact size makes it versatile for applications with limited space access. A patented secure bit locking mechanism with a one-touch release can only be activated by the user for greater flexibility of applications and efficiency on the line. Reduced bit wear lowers the incidence of bits falling out, which can slow production or cause product damage. All models provide bi-directional operation and are calibrated in either the CW or CCW direction. Ergonomic handles are designed with fewer flutes and larger recesses to make the tools easier to hold, less likely to cause hand fatigue and make drivers easier to clean. Enable quick and error-free tool and torque setting identification with four different color-coding label options. Two-year unlimited warranty. Lifetime guarantee against manufacturing defects. The new design improves serviceability, reduces downtime, and enables the replacement of individual parts to extend the life of your investment. Mountz extensive Cmk testing happened over 20,000 continuous torque readings and is documented in a Mountz-authored technical whitepaper. With FG, you can Proceed with Confidence Low-impact poka-yoke torque screwdriver prevents over-torque and vibration on sensitive components and delivers repeatability, traceability, and precision for all tightening applications. Preset screwdriver reduces the risk of operator tampering and ensures that the operator consistently applies the correct torque value to each fastener. Cam-over technology ensures correct torque is applied and reduces fastener breakage. Our tools are durable & reliable. We provide an Industry leading warranty: 2 years unconditional. Lifetime against defects. Calibration life 2x ISO standards, unmatched by any mini torque screwdriver Error-Proofing: Engineered with a cam-over mechanism, the mini poka-yoke torque screwdrivers reduce the possibility of operator error in both fastening directions, ensuring correct torque is applied and preventing fastener breakage. Providing the operator with a preset tool prevents tampering and ensures that operators always use the appropriate torque setting - unmatched security of the tamper-proof internal adjustment. No external adjustment scale - must be preset using a torque analyzer. Process Improvement: Use color-coded label options for visible and easy-to-understand torque setting identification. Ergonomics: Ergonomic handles are designed with fewer flutes and larger recesses to make the tools easier to hold, and less likely to cause hand fatigue. The small, ergonomic handle design perfectly fits the operator's hand and reduces fatigue during those extended assembly operations. The tool's compact size makes it versatile for applications with limited space access. Advanced Technology: Mountz torque unique bearing system eliminates axial load and sideloads on the fastener applied by the operator. Mountz tools use a patented secure bit locking mechanism with a one-touch release so that the operator can activate it to enable greater flexibility of applications and efficiency on the line. Reduced bit wear lowers the incidence of bits falling out, which can slow production or cause product damage. The new design improves serviceability, reduces downtime, and enables the replacement of individual parts to extend the life of your investment. The tool can be calibrated and operational in either the CW or CCW direction. Mountz Quality Standards: Our tools are durable & reliable. We provide an Industry leading warranty: 2 years unconditional. Lifetime against defects. Calibration life is 2x ISO standard for FG-25z models only. Unmatched by any mini torque screwdriver. All Mountz-designed hand tools endure extensive Cmk testing over 20,000 continuous torque readings. Review our technical whitepaper to learn more! The preferred and certified ranges of these tools is in accordance with the requirements of ISO 6789 (+/- 6% of indicated setting). Ranges Model American S.I. Drive Size FG-25z-Blue076705 3 - 25 ozf.in 2 - 17.7 cN.m 1/4" F/Hex FG-25z-Red076706 3 - 25 ozf.in 2 - 17.7 cN.m 1/4" F/Hex FG-25z-Green076707 3 - 25 ozf.in 2 - 17.7 cN.m 1/4" F/Hex FG-25z-Gold076708 3 - 25 ozf.in 2 - 17.7 cN.m 1/4" F/Hex FG-50z-Blue076709 10 - 50 ozf.in 7.1 - 35.3 cN.m 1/4" F/Hex FG-50z-Red076710 10 - 50 ozf.in 7.1 - 35.3 cN.m 1/4" F/Hex FG-50z-Green076711 10 - 50 ozf.in 7.1 - 35.3 cN.m 1/4" F/Hex FG-50z-Gold076712 10 - 50 ozf.in 7.1 - 35.3 cN.m 1/4" F/Hex Downloads Mountz FG-Mini Preset Torque Screwdrivers - Data Sheet Mountz FG-Mini Preset Torque Screwdrivers - Instruction Manual Mountz FG-Mini Preset Torque Screwdrivers - Dimensions Mountz FG-Mini Preset Torque Screwdrivers - Parts List Mountz FG-Mini Preset Torque Screwdrivers - WhitePaper Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fg-mini-preset-torque-screwdrivers-p-2132.html Tue, 02 Apr 2024 22:59:29 +0000 USD 2132 Mountz 1000 FG-Mini https://www.abqindustrial.net/store/images/mountz-fg-mini-preset-torque-screwdrivers.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-hg-series-hand-torque-multipliers-p-2131.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2131 ]]>Precision tightening and loosening of all heavy duty fastening connections For operation in combination with a torque wrench Torque Multiplication Ratio - low energy input with high torque output The Mountz HG-Series Hand Torque Multipliers is a ideal tools for applications where air and electricity aren't easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries Features Precision tightening and loosening of all heavy duty fastening connections. For operation in combination with a torque wrench. Torque Multiplication Ratio - low energy input with high torque output. Compact design allows for operation in space-restricted applications. Ideal tool for applications where air and electricity aren't easily accessible. Most models furnished with anti-windup ratchets allowing jobs to be performed easily, efficiently and safely. Constructed with quality steel. Each tool contains a torque multiplication selection chart. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries. Accuracy better than ± 5%Note! H-10 & H-15 models are not fitted with Anti-Windup. All models are supplied with a Reaction Foot, except HG-80 model is supplied with a Reaction Ring Ranges ModelNumber Max Torque Range - American Torque Units - American Max Torque Range - S.I. Torque Units - S.I. H-10213700 1033 lbf. ft 1400 N.m H-15213701 1033 lbf. ft 1400 N.m HG-10213702 1033 lbf. ft 1400 N.m HG-15213703 1033 lbf. ft 1400 N.m HG-20213704 2581 lbf. ft 3500 N.m HG-30213705 3687 lbf. ft 5000 N.m HG-40213706 4425 lbf. ft 6000 N.m HG-50213707 5900 lbf. ft 8000 N.m HG-60213708 8480 lbf. ft 11500 N.m HG-80213709 36880 lbf. ft 50000 N.m ModelNumber Max Torque Range - Metric Torque Units - Metric Torque Multip. Gear Ratio Drive Size H-10213700 142.8 kgf. m 3.5:1 4 3/4" Sq. Dr. H-15213701 142.8 kgf. m 3.5:1 4 1" Sq. Dr. HG-10213702 142.8 kgf. m 3.5:1 4 3/4" Sq. Dr. HG-15213703 142.8 kgf. m 3.5:1 4 1" Sq. Dr. HG-20213704 357 kgf. m 11.5:1 16 1" Sq. Dr. HG-30213705 510 kgf. m 14.3:1 18 1 1/2" Sq. Dr. HG-40213706 612 kgf. m 16:1 21 1 1/2" Sq. Dr. HG-50213707 816 kgf. m 20.5:1 24 1 1/2" Sq. Dr. HG-60213708 1173 kgf. m 23.2:1 28 1 1/2" Sq. Dr. HG-80213709 5100 kgf. m 126:1 180 2 1/2" Sq. Dr. Female Input 3/4" Sq drive all modelsAll models are supplied with a Reaction Foot, except HG-80 model is supplied with a Reaction Ring. Downloads Mountz HG-Series Hand Torque Multipliers - Data Sheet Mountz HG-Series Hand Torque Multipliers - Instruction Manual Mountz HG-Series Hand Torque Multipliers - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-hg-series-hand-torque-multipliers-p-2131.html Sun, 07 Jul 2024 14:54:29 +0000 USD 2131 Mountz 1000 HG-Series https://www.abqindustrial.net/store/images/mountz-hg-series-hand-torque-multipliers.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbx-break-over-wrenches-p-2130.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2130 ]]>Torque limiting wrench improves control of the tightening process Reduces the risk of both over and under-tightening Break-over mechanism provides a visual indicator of achieving torque setting Engineered and assembled in Silicon Valley, the Mountz TBX line of precision preset break-over wrenches ensures consistent process and quality control by providing operators with a break-over wrench that helps you support your quality control inspectors by empowering your workers to prevent assembly errors. Torque range suitable for low to higher torque applications. Designed to tighten diverse fasteners accurately, break-over wrenches inform their operator when the right torque is reached by deflecting on their built-in hinge. As a result, you can reduce defective products and rework related to over- and under-torque conditions. Their small size enables them to fit into areas with tight clearances, boosting productivity and project ROI. With interchangeable heads, Mountz break-over wrenches allow you to switch out heads for tricky fasteners and to get more use out of your existing tools. NOTE: Head interchangeability is intended for use during recalibration to allow reconfiguring tools for different applications. They are not intended to be interchanged as a normal part of a manufacturing process. Mountz TBX Break Over Wrenches have a calibration life of 4x ISO standards that is unmatched by any click wrench on the market to keep your tools out of the lab and on the production floor. Features Safeguarding Against Fastening Failures Torque limiting wrench improves control of the tightening process and reduces the risk of over and under-tightening The preset wrench ensures that the correct torque value is consistently applied to each fastener by reducing the risk of the operator tampering with settings. The break-over mechanism provides a visual indicator of achieving torque setting, improving productivity. Interchangeable end fitting design - selectable head types and sizes. Our products are reliable and durable; Calibration life 4x ISO standards, unmatched by any click wrench Error-Proofing Torque limiting wrench improves control of the tightening process, reducing the risk of over and under-tightening to deliver repeatability, traceability, and precision for tightening applications. A preset wrench ensures that the correct torque value is applied consistently to each fastener by reducing the risk of the operator tampering with settings. This tool has no external adjustment scale and is set using a torque analyzer. Advanced Technology Unique interchangeable end fitting design - we offer selectable head types and sizes, including open end, box head, hex key, fixed square drive heads, and ratchet heads. We manufacture interchangeable heads with a common centerline, so the torque setting remains unchanged when changing head sizes. Process Improvement The break-over mechanism provides a visual indicator of achieving torque setting, improving productivity. The tool only operates in a CW direction. Specifications ISO 6789-1:2017 Mountz 4x ISO standards: 20,000 cycles before re-calibration Ranges Model TBX-12 TBX-12 ESD TBX-25 TBX-25 ESD Item # 076815 076818 076816 076819 American 21.2 – 106.2 lbf.in 21.2 – 106.2 lbf.in 44.3 – 221.3 lbf.in 44.3 – 221.3 lbf.in N.m 2.4 – 12 N.m 2.4 – 12 N.m 5 – 25 N.m 5 – 25 N.m Drive Size Type A Type A Type B Type B Length 6" 6" 10.4" 10.4" Length mm 152 152 264 264 Wt. lbs. 0.8 lbs 0.8 lbs 1.6 lbs 1.6 lbs Wt. g. 363 363 726 726 Break 20° or 90° 20° or 90° 20° 20° Downloads Mountz TBX Break Over Wrenches - Data Sheet Mountz TBX Break Over Wrenches - Instruction Manual Mountz TBX Break Over Wrenches - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbx-break-over-wrenches-p-2130.html Wed, 03 Apr 2024 19:19:55 +0000 USD 2130 Mountz 1000 TBX https://www.abqindustrial.net/store/images/mountz-tbx-break-over-wrenches.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/imada-cedar-ndid-150cn-adjustable-torque-screwdriver-p-2129.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2129 ]]>Selectable units: ozf-in, lbf-in, kgf-cm, N-m and cN-m 400 data internal memory for torque data can be recalled and managed Accuracy: ±1% F.S. ±1 LSD The Imada Cedar NDID-150CN Adjustable Torque Screwdriver features the simplicity of a click-type torque tool combined with easy visual confirmation and data collection. The torque limiting clutch slips (clicks) at the preset torque point and unlike typical click-type tools, more torque cannot be applied. The torque point is set on an analog scale using the included hex wrench and marks on the driver handle. Confirm the preset torque point by applying torque until the clutch slips, and checking the peak torque on the LCD display. Use the three way program dial to select peak or real time mode, units, Go/No Go High and Low, Auto Zero, etc. Capture and recall up to 400 torque data in internal memory and save them to USB memory for transfer to a PC. When Go/No Go High and Low are set the LED indicator lights green for between the High and Low and red for under or over. Accuracy is ± 1% F.S., ±1 LSD. The torque driver is powered by an NiMH rechargeable battery. Kit Contents Calibration Certificate Inspection Sheet Traceability Chart A/C Adaptor USB Flash Memory 2 Bits Hex wrench Convenient rechargeable battery Features When the torque limiting clutch slips at the preset torque point, the torque sensor captures the actual slip torque on the LCD display. The torque point is set on an analog scale not digital. The digital display shows the actual slip torque at the torque point. Go/No Go LED indicator and audible alert Selectable units: ozf-in, lbf-in, kgf-cm, N-m and cN-m Peak and Real Time modes (selectable) Rechargeable NiMH batteries (3 hour use) 400 data internal memory for torque data can be recalled and managed Save stored tightening torque data to USB memory for transfer to PC Ergonomic, light weight, rugged metal construction Accuracy: ±1% F.S. ±1 LSD NDID-150cN includes 2 Phillips tips, hex wrench, AC adapter/charger, USB memory stick, calibration cert traceable to NIST and carrying case Specifications Operation Temp 10 ～ 35ºC (Storage Temp 0 ～ 45ºC Measurement Mode Screw Counter PP C When the grip slip, measure the peak torque. Manage the tightened number at the "CLEAR" timing Peak Hold PP Measure the peak torque Real Time Output C After trigger detection (direction, torque), save 500 data Track - Display the load torque Memory Function Screw Counter PP C USB flash memory Peak Hold PP Body (MAX. 400 data) Real Time Output C USB flash memory Track - Non Battery Ni-MH Charge cycles : over 300 times（Time : about 3 hours） Auto power off 3 minutes (Releasable) Ranges ozf-in lbf-in kgf-cm N-m cN-m 2.7~212.5 0.017~13.28 0.020~15.30 0.020~1.500 2.0~150.0 Downloads Imada Cedar NDID Adjustable Torque Screwdriver - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/imada-cedar-ndid-150cn-adjustable-torque-screwdriver-p-2129.html Wed, 24 Jul 2024 16:49:39 +0000 USD 2129 Imada 1000 NDID https://www.abqindustrial.net/store/images/imada-cedar-ndid-adjustable-torque-screwdriver.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-mini-rda-mini-run-down-adapters-p-2128.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2128 ]]>Provide consistent and reliable torque readings for power-driven torque control tools Compact to limit spacing between the power tool and torque measurement equipment for improved accuracy and ease of use The Mountz Mini-RDA Mini Run Down Adapters is designed to be used with low torque sensors to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics to provide a more accurate torque reading during testing and calibration. Mountz Mini-RDA Mini Run Down Adapters allow for an accurate simulation of actual joints. Run-down adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability. Kit Contents 5 mini RDA units along 10 fasteners Features The mini RDA unit with fastener is designed for low torque sensors BMX20z - BMX10i and MTX models Designed to provide consistent and reliable torque readings for use with low torque power tools The mini RDAs allow a close simulation of actual joints Adapter is mounted in-line between tool drive an the torque sensor Operates in clockwise direction only Provide consistent and reliable torque readings for power-driven torque control tools RDA is mounted in-line between the tool drive and the transducer of a torque analyzer or sensor Compact to limit spacing between the power tool and torque measurement equipment for improved accuracy and ease of use Operates in a clockwise direction only. After each run down, the RDA should be backed-up Models Model Item # Screws Mini RDA2 061229-2 PH Phil 2-56 x 1/4 SS Mini RDA4 061229-4 PH Phil 4-40 x 1/4 SS Mini RDA6 061229-6 PH Phil 6-32 x 1/4 SS Mini RDA10 061229-10 PH Phil 10-32 x 1/4 SS NOTE: Change screws when thread wear occurs. (Recommended - approximately every 25 run downs). The Mini-RDA unit is not made of Stainless Steel material Related Products Mountz RDA Run Down Adapters for Torque Testers Available in capacities up to 5000 Lb-ft / 6780 Nm RDF Standard Rundown Fixture - Joint Simulators for Torque Testers Required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic) Downloads Mountz Mini-RDA Mini Run Down Adapters - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-mini-rda-mini-run-down-adapters-p-2128.html Sat, 18 Nov 2023 21:42:22 +0000 USD 2128 Mountz 1000 Mini-RDA https://www.abqindustrial.net/store/images/mini-rda-run-down-adapter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-fmk-x-flooring-master-kit-x-p-2127.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2127 ]]>Ultimate Kit for Pre- & Post-Application Moisture Testing of Concrete Slabs Built-in hygrometer and Infrared Surface Thermometer Complies with ASTM F2659 & ASTM F2170 The Tramex FMK-X Flooring Master Kit X is ultimate kit for pre- & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Featuring the Tramex MEX5 Moisture Encounter and Humidity Meter for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX5 Concrete Moisture Encounter X5 for non-destructive quantitative and comparative testing of concrete and ambient conditions. The Tramex CMEX5 Concrete Moisture Encounter X5 incorporates a plug-in heavy-duty pin-probe measures Moisture Content in wood or WME in other building materials. The Tramex CMEX5 Concrete Moisture Encounter X5 also incorporates plug-in RH probes for in-situ testing of concrete, building materials, structures and air spaces. These probes can be used with the Feedback Datalogger to give live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 Concrete Moisture Encounter X5 hygrometer. The Tramex WDMK-X Water Damage Restoration Master Kit X comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. The Tramex MEX5 Moisture Encounter and Humidity Meter is a digital Dual-Depth, non-destructive moisture meter for wood and various building materials such as drywall, roofing, plaster, tile and masonry. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. Moisture test results can be visualized and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. The Tramex CMEX5 Concrete Moisture Encounter X5 for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659. Incorporating plug-in ports for the optional Hygro-i2® relative humidity probe testing per ASTM F2170 and heavy-duty pin-type wood probes, this moisture meter transforms into the ideal all-in-one instrument for the flooring professional. The Tramex DL-RHTX Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. Used to perfom ASTM F2170 with the Tramex Hygro-2 probe. The Tramex IRT2 Infrared Surface Thermometer is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -58ºF to 1202º (-50°C to 650°C) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The Tramex IRT2 Infrared Surface Thermometer has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter Tramex CMEX5 Concrete Moisture Encounter X5 Tramex DL-RHTX Feedback DataLogger Tramex IRT2 Infrared Surface Thermometer Tramex Heavy-duty Pin-type Wood Probe Tramex Hammer-Action Pin-Type Electrode Tramex HIPP Hygro-i2 Relative Humidity Probe Tramex RHHL Hygro-i Hole Liners and Caps Tramex SAL75 Calibration Salt Check Tramex RHIE2 Electronic Interface Cable Tramex AP-F2170 ASTM F2170 Accessory Pack Free App available for Android and iOS Tramex MAXMULTI Carring Case Operating Instructions One (1) year warranty Features Features of the Tramex MEX5 Moisture Encounter and Humidity Meter NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope Mapping the extent of moisture damage caused to buildings Monitoring progressive drying conditions in the drying process of building materials and surfaces Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings Features of the Tramex CMEX5 Concrete Moisture Encounter X5 4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer and optional external in-situ hygrometer and wood pin probe. 8 simple membrane keypad controls. Moisture readings and scale are displayed on a large, clear easy-to-read clear digital display: 2.3" x 1.4" (58mm x 35mm). The built-in Hygrometer probe provides Relative Humidity (RH) readings, temperature, dew point temperature and Humidity Ratio. Wood pin probe mode is automatically selected when the probe is plugged into the Concrete Moisture Encounter X5. When the external Relative Humidity (RH) Hygro-i2 probe is connected to the Concrete Moisture Encounter X5, the instrument automatically switches to RH mode. Ambient or In-Situ Relative Humidity readings, probe temperature, dew point temperature and Humidity Ratio are automatically displayed (Hygrometer Mode). When the battery requires replacement a LOW BATTERY icon is shown on the display. Features of the Tramex DL-RHTX Feedback DataLogger Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries. Instant set up and start modes. Precise Ambient Relative Humidity and Temperature logging. Used to perform BS 8201, 8203, 5325 and ASTM F2170. Intuitive and instructive App interface. Adjustable Interactive chart, spreadsheet, report and easy export functions. Connectivity up to 165ft (50m) for highly accessible data downloads. Ambient Relative Humidity, Temperature, Dew point, Grains per pound. Psychrometric chart showing Relative Humidity, Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point. Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional Contact Temperature Probe) Features of the Tramex IRT2 Infrared Surface Thermometer Rapid detection function Precise non-contact measurements Dual laser sighting Automatic Data Hold User selectable ºC or ºF Emissivity digitally adjustable from 0.10 to 1.0 MAX temperature display Backlight LCD display Trigger LOCK for continuous use Set high and low alarms Unique flat surface, modern housing design Specifications Tramex Tramex FMK-X Flooring Master Kit X: Size 20.5" x 18.9" x 5.9" (52cm x 48cm x 15cm) Weight 13.2 lbs (6kg) Power 5 x AA batteries, 1 x 9 volt PP3 battery Specifications of the Tramex MEX5 Moisture Encounter and Humidity Meter Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital 2.3" x 1.4" (58mm x 35mm) Depth of penetration Shallow signal: up to ⅜" (10mm) | Deep signal: up to 1¼" (30mm) Specifications of the Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH +/- 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Specifications of the Tramex DL-RHTX Feedback DataLogger Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Specifications of the Tramex IRT2 Infrared Surface Thermometer Temperature range -58ºF ~ 1202ºF (-50 to 650 ºC) Distance to Spot ratio D:S = 12:1 Display resolution 0.1 ºF(0.1ºC)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) | ±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC)  ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5% Repeatability -58~68ºF (-50~20ºC):  ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-fmk-x-flooring-master-kit-x-p-2127.html Wed, 15 Nov 2023 21:29:22 +0000 USD 2127 Tramex 1000 FMK-X https://www.abqindustrial.net/store/images/tramex-fmk-x-flooring-master-kit-x.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-wdmk-x-water-damage-restoration-master-kit-x-p-2126.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2126 ]]>NDT - Non destructive testing Built-in hygrometer and Infrared Surface Thermometer Complies with ASTM D7954 The Tramex WDMK-X Water Damage Restoration Master Kit X allows for moisture and relative humidity testing and monitoring of buildings and building materials. Featuring the Tramex MEX5 Moisture Encounter and Humidity Meter for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX5 Concrete Moisture Encounter X5 for non-destructive quantitative and comparative testing of concrete and ambient conditions. The Tramex CMEX5 Concrete Moisture Encounter X5 incorporates a plug-in heavy-duty pin-probe measures Moisture Content in wood or WME in other building materials. The Tramex CMEX5 Concrete Moisture Encounter X5 also incorporates plug-in RH probes for in-situ testing of concrete, building materials, structures and air spaces. These probes can be used with the Feedback Datalogger to give live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 Concrete Moisture Encounter X5 hygrometer. The Tramex WDMK-X Water Damage Restoration Master Kit X comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. The Tramex MEX5 Moisture Encounter and Humidity Meter is a digital Dual-Depth, non-destructive moisture meter for wood and various building materials such as drywall, roofing, plaster, tile and masonry. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. Moisture test results can be visualized and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. The Tramex CMEX5 Concrete Moisture Encounter X5 for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659. Incorporating plug-in ports for the optional Hygro-i2® relative humidity probe testing per ASTM F2170 and heavy-duty pin-type wood probes, this moisture meter transforms into the ideal all-in-one instrument for the flooring professional. The Tramex DL-RHTX Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. Used to perfom ASTM F2170 with the Tramex Hygro-2 probe. The Tramex IRT2 Infrared Surface Thermometer is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -58ºF to 1202º (-50°C to 650°C) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The Tramex IRT2 Infrared Surface Thermometer has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter Tramex CMEX5 Concrete Moisture Encounter X5 Tramex DL-RHTX Feedback DataLogger Tramex IRT2 Infrared Surface Thermometer Tramex Heavy-duty Pin-type Wood Probe Tramex 7.8" (200mm) Insulated Pins for In-Depth Penetration Tramex RHP-NW Narrow Wand Relative Humidity Probe Tramex HIPP Hygro-i2 Relative Humidity Probe Tramex RHHL Hygro-i Hole Liners and Caps Tramex SAL75 Calibration Salt Check Tramex Extension Handle Free App available for Android and iOS Tramex MAXMULTI Carring Case Operating Instructions One (1) year warranty Features Features of the Tramex MEX5 Moisture Encounter and Humidity Meter NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope Mapping the extent of moisture damage caused to buildings Monitoring progressive drying conditions in the drying process of building materials and surfaces Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings Features of the Tramex CMEX5 Concrete Moisture Encounter X5 4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer and optional external in-situ hygrometer and wood pin probe. 8 simple membrane keypad controls. Moisture readings and scale are displayed on a large, clear easy-to-read clear digital display: 2.3" x 1.4" (58mm x 35mm). The built-in Hygrometer probe provides Relative Humidity (RH) readings, temperature, dew point temperature and Humidity Ratio. Wood pin probe mode is automatically selected when the probe is plugged into the Concrete Moisture Encounter X5. When the external Relative Humidity (RH) Hygro-i2 probe is connected to the Concrete Moisture Encounter X5, the instrument automatically switches to RH mode. Ambient or In-Situ Relative Humidity readings, probe temperature, dew point temperature and Humidity Ratio are automatically displayed (Hygrometer Mode). When the battery requires replacement a LOW BATTERY icon is shown on the display. Features of the Tramex DL-RHTX Feedback DataLogger Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries. Instant set up and start modes. Precise Ambient Relative Humidity and Temperature logging. Used to perform BS 8201, 8203, 5325 and ASTM F2170. Intuitive and instructive App interface. Adjustable Interactive chart, spreadsheet, report and easy export functions. Connectivity up to 165ft (50m) for highly accessible data downloads. Ambient Relative Humidity, Temperature, Dew point, Grains per pound. Psychrometric chart showing Relative Humidity, Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point. Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional Contact Temperature Probe) Features of the Tramex IRT2 Infrared Surface Thermometer Rapid detection function Precise non-contact measurements Dual laser sighting Automatic Data Hold User selectable ºC or ºF Emissivity digitally adjustable from 0.10 to 1.0 MAX temperature display Backlight LCD display Trigger LOCK for continuous use Set high and low alarms Unique flat surface, modern housing design Specifications Tramex WDMK-X Water Damage Restoration Master Kit X: Size 20.5" x 15.7" x 5.9" (52cm x 40cm x 15cm) Weight 9.9lbs (4.51kg) Power 2 x AALR6 Alkaline, 3 x 9 volt PP3 Batteries (included) Specifications of the Tramex MEX5 Moisture Encounter and Humidity Meter Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital 2.3" x 1.4" (58mm x 35mm) Depth of penetration Shallow signal: up to ⅜" (10mm) | Deep signal: up to 1¼" (30mm) Specifications of the Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH +/- 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Specifications of the Tramex DL-RHTX Feedback DataLogger Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Specifications of the Tramex IRT2 Infrared Surface Thermometer Temperature range -58ºF ~ 1202ºF (-50 to 650 ºC) Distance to Spot ratio D:S = 12:1 Display resolution 0.1 ºF(0.1ºC)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) | ±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC)  ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5% Repeatability -58~68ºF (-50~20ºC):  ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-wdmk-x-water-damage-restoration-master-kit-x-p-2126.html Wed, 15 Nov 2023 21:29:21 +0000 USD 2126 Tramex 1000 WDMK-X https://www.abqindustrial.net/store/images/tramex-wdmk-x-water-damage-restoration-master-kit-x.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsmk-building-survey-master-kit-p-2125.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2125 ]]>NDT - Non destructive testing Built-in hygrometer and Infrared Surface Thermometer Complies with ASTM D7954 The Tramex BSMK Building Survey Master Kit is a complete kit featuring the Tramex RWS Roof Moisture Meter And Wet Wall Scanner for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. The Tramex BSIMK X Building Survey Master Kit features the multifunctional Tramex MEX5 Moisture Encounter and Humidity Meter allowing for noninvasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer and infrared surface thermometer for testing ambient relative humidity, temperature and dew point, and surface temperature. These can be used to identify detrimental condensation conditions conducive to microbial mold growth can also be identified. The heavy-duty pin-probes measure moisture content in wood, and the insulated 200mm (7.8”) pins and narrow 127mm (5”) RH probe allow for in-situ probing. The Tramex BSIMK X Building Survey Master Kitcomes with extension handles and a protective heavy-duty carrying case with die-cut foam lining. The Tramex RWS Roof Moisture Meter And Wet Wall Scanner is a multi-mode non-invasive impedance scanner designed for the instant, precise and non-destructive evaluation of moisture conditions and leak tracing in roofing per ASTM D7954 and in wall systems of the building envelope. The Tramex MEX5 Moisture Encounter and Humidity Meter is a digital Dual-Depth, non-destructive moisture meter for wood and various building materials such as drywall, roofing, plaster, tile and masonry. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. Moisture test results can be visualized and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter Tramex RWS Roof Moisture Meter And Wet Wall Scanner TramexHeavy-duty Pin-type Wood Probe Tramex 7.8" (200mm) Insulated Pins for In-Depth Penetration Tramex SAL75 Calibration Salt Check Free App available for Android and iOS Tramex MAXMULTI Carring Case Operating Instructions One (1) year warranty Features Features of the Tramex MEX5 Moisture Encounter and Humidity Meter NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope Mapping the extent of moisture damage caused to buildings Monitoring progressive drying conditions in the drying process of building materials and surfaces Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings Features of the Tramex RWS Roof Moisture Meter And Wet Wall Scanner Complies with ASTM D7954 For non-destructive moisture evaluation of roofs, EIFS, foam insulation systems & other building envelope applications To evaluate the extent of the moisture problem and help trace and pin-point its source Multi-mode functions allowing for depth penetration and sensitivity selection Fast and easy to operate giving instant clear readings "Hold” function facilitates ease of recording readings Lightweight, handheld and battery operated Telescopic handle (for use on roofs) Inexpensive to purchase and operate compared to other non-destructive testing methods Specifications Tramex BSIMK X Building Survey Master Kit: Size 20.5” x 15.7” x 5.9” (52cm x 40cm x 15cm) Weight 9.9lbs (4.51kg) Power 2 x AALR6 Alkaline, 3 x 9 volt PP3 Batteries (included) Tramex MEX5 Moisture Encounter and Humidity Meter Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital 2.3" x 1.4" (58mm x 35mm) Depth of penetration Shallow signal: up to ⅜" (10mm) | Deep signal: up to 1¼" (30mm) Tramex RWS Roof Moisture Meter And Wet Wall Scanner Size 4.9" x 10.8" x 2.9" (125mm x 275mm x 75mm) Weight 1.88lbs (853g) Construction ABS Body Power: 9 volt PP3 Battery Included Display Analog Depth of penetration: 4" (100mm) Four Ranges Roofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity Downloads Tramex BSIMK X Building Survey Master Kit- Data Sheet Tramex MEX5 Moisture Encounter - Quick Guide Tramex MEX5 Moisture Encounter- Instruction Manual Tramex RWS Roof Moisture Meter And Wet Wall Scanner - Quick Guide Tramex RWS Roof Moisture Meter And Wet Wall Scanner - Instruction Manual Tramex RWS Roof Moisture Meter And Wet Wall Scanner - Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsmk-building-survey-master-kit-p-2125.html Fri, 12 Apr 2024 17:54:23 +0000 USD 2125 Tramex 1000 BSIMK https://www.abqindustrial.net/store/images/tramex-bsimk-x-building-survey-master-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsik-building-survey-inspection-kit-p-2124.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2124 ]]>NDT - Non destructive testing Built-in hygrometer and Infrared Surface Thermometer For drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex BSIK Building Survey Inspection Kit is a complete moisture and humidity testing kit featuring the multifunctional Tramex MEX5 Moisture Encounter and Humidity Meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer and infrared surface thermometer for testing ambient relative humidity, temperature and dew point, and surface temperature. These can be used to identify detrimental condensation conditions conducive to microbial mold growth can also be identified. The heavyduty handheld pin-probe and hammer-action pin-probe measure moisture content in wood, and the insulated 200mm (7.8") pins and narrow 260mm (10") RH probe allow for in-situ probing. The Tramex Building Survey Inspection Kit comes with an extension handle and a protective heavy-duty carrying case with die-cut foam lining The Tramex MEX5 Moisture Encounter and Humidity Meter is a digital Dual-Depth, non-destructive moisture meter for wood and various building materials such as drywall, roofing, plaster, tile and masonry. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. Moisture test results can be visualized and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter TramexHeavy-duty Pin-type Wood Probe Tramex Hammer-Action Pin-Type Electrode Tramex 7.8" (200mm) Insulated Pins for In-Depth Penetration Tramex RHP-NW Narrow Wand Relative Humidity Probe Tramex SAL75 Calibration Salt Check Free App available for Android and iOS Tramex MAXMULTI Carring Case Operating Instructions One (1) year warranty Features NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope. Mapping the extent of moisture damage caused to buildings. Monitoring progressive drying conditions in the drying process of building materials and surfaces. Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings. Specifications Size 16.5" x 14.2" x 5.5" (42cm x 36cm x 14cm) Weight 9.5lbs (4.3kg) Power 2 x AALR6 ALKALINE (included) Range NDT Moisture content for Wood 0 - 30% MC NDT Comparative for Building Materials 0 - 100 Pin % MC Wood 6 - approx 50% MC Pin % MC Drywall 0 - 8.5% MC Relative Humidity 0 - 99% With optional Hygro-i2 ® Probe Humidity accuracy: 0% - 99%RH +/- 2% @ 25°C / 77°F Downloads Tramex BSIK Building Survey Inspector Kit - Data Sheet Tramex MEX5 Moisture Encounter - Data Sheet Tramex MEX5 Moisture Encounter- Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsik-building-survey-inspection-kit-p-2124.html Thu, 11 Jan 2024 05:13:42 +0000 USD 2124 Tramex 1000 BSIK https://www.abqindustrial.net/store/images/tramex-bsik-building-survey-inspector-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsizk-building-survey-inspection-ez-kit-p-2123.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2123 ]]>NDT - Non destructive testing Built-in hygrometer and Infrared Surface Thermometer Tramex HA21SP52 Hammer-Action Pin-Type Electrode The Tramex BSIZK Building Survey Inspection EZ Kit is a complete moisture and humidity testing kit featuring the multifunctional Tramex MEX5 Moisture Encounter and Humidity Meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer and infrared surface thermometer for testing ambient relative humidity, temperature and dew point, and surface temperature. These can be used to identify detrimental condensation conditions conducive to microbial mold growth can also be identified. The heavyduty handheld pin-probe measures moisture content in wood and drywall, and WME readings for other materials. The Tramex MEX5 Moisture Encounter and Humidity Meter is a digital Dual-Depth, non-destructive moisture meter for wood and various building materials such as drywall, roofing, plaster, tile and masonry. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. Moisture test results can be visualized and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. The Tramex BSIZK Building Survey Inspector EZ Kit comes with a protective easy-travel case. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter Tramex Hammer-Action Pin-Type Electrode Free App available for Android and iOS Tramex ALLBAG Operating Instructions One (1) year warranty Features NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope. Mapping the extent of moisture damage caused to buildings. Monitoring progressive drying conditions in the drying process of building materials and surfaces. Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings. Specifications Size 15" x 11" x 3.5" (38cm x 28cm x 9cm) Weight 5.3lb (2.4kg ) Power 2 x AALR6 ALKALINE (included) Range NDT Moisture content for Wood 0 - 30% MC NDT Comparative for Building Materials 0 - 100 Pin % MC Wood 6 - approx 50% MC Pin % MC Drywall 0 - 8.5% MC Relative Humidity 0 - 99% With optional Hygro-i2 ® Probe Humidity accuracy: 0% - 99%RH +/- 2% @ 25°C / 77°F Downloads Tramex BSIZK Building Survey Inspector EZ Kit - Data Sheet Tramex MEX5 Moisture Encounter - Data Sheet Tramex MEX5 Moisture Encounter- Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsizk-building-survey-inspection-ez-kit-p-2123.html Tue, 06 Feb 2024 00:18:19 +0000 USD 2123 Tramex 1000 BSIZK https://www.abqindustrial.net/store/images/tramex-bsizk-building-survey-inspector-ez-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsitk-building-survey-inspection-tech-kit-p-2122.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2122 ]]>NDT - Non destructive testing Built-in hygrometer and Infrared Surface Thermometer Pin Probe (optional plug-in probe) The Tramex BSITK Building Survey Inspection Tech Kit is a complete moisture and humidity testing kit featuring the multifunctional Tramex MEX5 Moisture Encounter and Humidity Meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex MEX5 Moisture Encounter and Humidity Meter has a built-in hygrometer and infrared surface thermometer for testing ambient relative humidity, temperature and dew point, and surface temperature. These can be used to identify detrimental condensation conditions conducive to microbial mold growth can also be identified. The heavyduty handheld pin-probe measures moisture content in wood and drywall, and WME readings for other materials. The Tramex BSITK Building Survey Inspector Tech Kit comes with a protective easy-travel case. Kit Contents Tramex MEX5 Moisture Encounter and Humidity Meter Tramex HH14TP30-B Heavy-duty pin-type wood probe Free App available for Android and iOS Tramex ALLBAG Operating Instructions One (1) year warranty Features NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope. Mapping the extent of moisture damage caused to buildings. Monitoring progressive drying conditions in the drying process of building materials and surfaces. Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings. Specifications Size 13.8" x 9.1" x 3.5" (350mm x 230mm x 90mm) Weight 3.4lbs (1.55kg) Power 2 x AALR6 ALKALINE (included) Range NDT Moisture content for Wood 0 - 30% MC NDT Comparative for Building Materials 0 - 100 Pin % MC Wood 6 - approx 50% MC Pin % MC Drywall 0 - 8.5% MC Relative Humidity 0 - 99% With optional Hygro-i2 ® Probe Humidity accuracy: 0% - 99%RH +/- 2% @ 25°C / 77°F Downloads Tramex BSITK Building Survey Inspector Tech Kit - Data Sheet Tramex MEX5 Moisture Encounter - Data Sheet Tramex MEX5 Moisture Encounter- Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsitk-building-survey-inspection-tech-kit-p-2122.html Mon, 05 Feb 2024 23:55:31 +0000 USD 2122 Tramex 1000 BSITK https://www.abqindustrial.net/store/images/tramex-bsitk-building-survey-inspector-tech-kit.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-mechanical-c-101_35/mark-10-ac1095-double-column-extensions-for-motorized-test-stands-p-2121.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2121 ]]>Double column extensions for Motorized Test Stands This double column extension accommodates up to a 20 in. [508 mm] wide sample Double column extensions AC1095-1, AC1095-2, AC1095-3 Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots, with available fixture mounting plates. Compatible with: Models F105 / F305 / F505 test frames - these test frames include a base plate with matrix of threaded holes, which may be mounted to the column extension’s base. Model ESM303 test stand - if a base plate with matrix of threaded holes is needed, add part no. AC1096. Not compatible with shields. Features Increase horizontal and vertical clearances for large samples Anodized aluminum base features rows of T-slots for fixture mounting, with rubber bench mounts Specifications Weight AC1095-1: 100 lb [45.4 kg] | AC1095-2: 105 lb [47.6 kg] | AC1095-3: 123 lb [55.8 kg] HS Code 9024800000 ECCN EAR99 Country of origin USA Related Products Mark-10 Easy MESUR-LR Tension and Compression Test Frame Capacities up to 500 lbs / 2.2 kN Force vs Distance Measurement, Break Detection, Load Holding, and many other features OPTIONAL Mark-10 F105 / F305 / F505 / F505H Series-F Advanced Force Test Stands Computer Controlled Force Test Frame Force Capacities up to 500 lbF (2.2 kN) Easily Program Multi-Step Tests Downloads Mark-10 AC1095 Double column extensions for Motorized Test Stands - Solid Models Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-mechanical-c-101_35/mark-10-ac1095-double-column-extensions-for-motorized-test-stands-p-2121.html Wed, 01 Nov 2023 16:03:12 +0000 USD 2121 Mark-10 1000 AC1095 https://www.abqindustrial.net/store/images/mark-10-ac1095-double-column-extensions-for-motorized-test-stands.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-p-2120.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2120 ]]>Capacities up to 1500 lbs / 6.7 kN Force vs Distance Measurement, Break Detection, Load Holding, and many other features Made in the USA, 3 Year Warranty 4 Models Travel - 14.2in / 360mm F755S - 750 lb / 3.4 kN F1505S - 1500 lb / 6.7 kN Travel - 32in / 813mm F1505 - 1500 lb / 6.7 kN F755- 750 lb / 3.4 kN Load Cell and Grips Sold Separately Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more. Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library. Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed. Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available. Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens. Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Kit Contents Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range Control panel, mounting bracket, and hardware Eye end kit for base 2 Lock ring for eye end 2 Spanner wrench Power cord Allen wrench set Features 3 Year Warranty Easy-To-Use Touch Screen Controller Adjustable upper and lower solid state limit switches Easy-to-service electronics Position accuracy of ±0.006 in / 0.15 mm under any load, at any position Smooth, quiet operation, with virtually no speed variation under load The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place Specifications   F755-EM F755S-EM F1505-EM F1505S-EM Load capacity* 750 lbF [3.4 kN] 1,500 lbF[6.7 kN] Maximum travel 32 in [813 mm] 14.2 in [360 mm] 32 in [813 mm] 14.2 in [360 mm] Standard speed range 0.5 - 24 in/min [10 - 600 mm/min] Optional speed range 0.001 - 60 in/min [0.02 - 1,525 mm/min] 0.001 - 70 in/min [0.02 - 1,800 mm/min] Load accuracy (% of full scale) Test frame: ± 0.1% Force sensor: Series FS05: ± 0.1% | Series FS06: ± 0.15% | Series R07: ± 0.15% Load sampling rate 5,000 Hz Data acquisition rate 100 Hz Speed accuracy ± 0.2% of setting, virtually no variation with load Distance accuracy ± 0.006 in [0.15 mm], at any load or position, factory-compensated Distance resolution 0.001 in [0.02 mm] Limit switch repeatability ± 0.001 in [0.03 mm] Overload protection Motor stops at 120% of full scale of the force sensor Power Universal input 100-240 VAC, 50/60 Hz, 300W Universal input 100-240 VAC, 50/60 Hz, 450W Fuse type 4A, 3AG, SLO BLO Weight (test frame only) 184 lb [83 kg] 149 lb [68 kg] 197 lb [89 kg] 157 lb [71 kg] Shipping weight 235 lb [107 kg] 195 lb [88 kg] 247 lb [112 kg] 205 lb [93 kg] Environmental conditions Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ± 10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 Conformance CE, UKCA Warranty 3 years [see individual statement for further details] Load capacity is reduced at higher speeds, as follows: F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min Model No. HS Code ECCN Country of Origin F755-EM F755S-EM F1505-EM F1505S-EM AC1092-1 AC1092-2 9024900000 EAR99 USA CERT-DS 9024800000 EasyMESUR The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including: Test to a load Test to a sample break Test to a distance Load holding Cycle testing Average force testing View data in graphical format or results tables. Save or export data as needed, or generate a report. What's your point of view? Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Standard View Graph View Results View View large-format load and distance values, with pass/fail status. Optional functions shown here: Distance Measurement View a graph of load vs. distance or time, with pass/fail status. Optional functions shown here: Distance Measurement, Graphing & Reporting View results for each run, with corresponding statistics for the results. Optional functions shown here: Distance Measurement, Graphing & Reporting Test setup is easy as 1-2-3 Basic tests Select a test type, and EasyMESUR® will guide you through the setup. Load Limit Distance Limit Break Limit Load Hold Cycle Averaging Basic Test Settings Test direction Speed Test-specific parameters Data save preferences Results Settings Select results Enable and configure pass/fail limits Set data collection rate Set auto-return to home Graph Settings Single-point vs. continuous graphing Set force vs. time or vs. distance Graphing start threshold Robust data acquisition and management Blazingly fast Force sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR® collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run. Standard reporting Save a single result per run, such as maximum load to a USB flash drive or internal storage. Save results as an EasyMESUR file for later viewing or export to a .csv file. Each run includes the run number, pass/fail status, and result, such as a maximum compression load. With the Graphing & Reporting function View and save all data points collected during a run, including reading number, load, elapsed time, and distance (Distance Measurement function required). View statistics for the results. View a graph of load vs. time or load vs. distance (Distance Measurement function required). Create and save a report, including results and graph. Save report templates for future use. Intelligent manual control Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe® force-based positioning. Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments. FollowMe optional function required. Calibrate force sensors on the test frame or off-site Calibrate force sensors in one of two ways: Test frame EasyMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces. Off-site Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter). Secure user access Control user access to sensitive areas, such as test editing and calibration, via password. Related Products Mark-10 Series FS05 Tension and Compression Force Sensors Capacities up to 500 lb / 2.5 kN Mark-10 Series FS06 Tension and Compression Force Sensors Compatible with Model F105, F305, F505, and F505H test frames Mark-10 Series R07 S-Beam Force Sensor Compatible with Models F755, F755S, F1505, and F1505S test frames Mark-10 AC1092 Shields for Test Frames and Test Stands Rugged construction of frame and shield Downloads Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Data Sheet Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Instruction Manual Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-p-2120.html Tue, 02 Apr 2024 20:57:40 +0000 USD 2120 Mark-10 999 EasyMESUR-HR https://www.abqindustrial.net/store/images/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-fsr-tension-sensors-online-p-2119.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2119 ]]>Single Roller Tension Sensor Can be connected to SC-PM Tension Indicator Multiple output options including analog, USB, RS-232, RS-422 & Wi-Fi Fined-mounted tension sensor, single rollers system, for mounting at an existing location to create a fixed wrap angle of the material over the sensor rollers. 29.5mm diameter hardened steel v-grooved roller is standard. Optional rollers include a U-Grooved Roller with 5mm radius, 70mm diameter lightweight roller for optic fibers and similar fragile filaments as well as ribbon rollers for flat materials such as tapes/bands, tows, ribbon cable, rectangular wires and similar flat materials. 5 ranges are offered from 0-10N (1Kg) up to 0-200N (20 Kg), rated in resultant force (therefore wrap angle must be taken into account and resultant force calculated) Kit Contents Hans-Schmidt FSR Tension Sensors, Online Certificate of Compliance with the order 2.1 according EN 10204 free of charge Operating Instruction Transport Packaging Features Includes integrated amplifier with "zero" and "gain" adjustment pots Standard output is 0-1V DC Optional outputs include 0-10V DC, 4-20mA, USB, RS-232 and RS-422 Optional Wi-Fi cable free data transfer available requires use of battery pack for sensor Sensor can be mounted using holed in sensor body or front plate of sensor Features full bridge strain gauge sensing for highest accuracy Requires 15-24V DC regulated power for sensor excitation Optional Digital Tension Indicators are offered Specifications Calibration According to the factory calibration procedure Accuracy ±1.5 % full scale and ±1 digit % full scale or better other calibration material ±3 % full scale or better Overload Protection 100% of tension range Measuring principle Strain gauge bridge (Load Cell) Measuring roller deflection 0.5 mm, max Temperature drift Less than ±0.05 % full scale/ºC Output signal Standard: 0 – 1 V DC Option DC: 0 - 10V DC Option MA: 4-20mA Option USB: USB Output Option 232: RS-232 (200Hz) Option 422: RS-422 (200Hz) Option WL: Wi-Fi Output Damping Standard: 30 Hz (other values on request) Temperature Range 10 – 45 ºC Air Humidity 85 % RH, max. Power supply +15…24 V DC, max. 50 mA regulated Housing Material Aluminium Weight, net (gross) Approx. 250 g (Approx. 350 g) Ranges Model Resultant Force Capacity (g/Kg) Resultant Force Capacity (Newtons) FSR-10N 1000g / 1 Kg 0 – 10 N FSR-20N 2000g / 2 Kg 0 – 20 N FSR-50N 5Kg 0 – 50 N FSR-100N 10Kg 0 – 100 N FSR-200N 20 Kg 0 – 200 N FSR-500N 50 Kg 0 - 500N Determining the Tension Range The tension range can be calculated for every wrapping angle with this formula: When selecting the nominal measurement force it is necessary to take into account the weight of the guide roll and raise the nominal load respectively, particularly when working with small nominal forces Available Roller Types Roller Code Diameter / Width Max Line Speed (m/min) Roller Material Standard 29.5 mm (V-Groove) 4000 Hardened Steel R1 29.5 mm (U-Groove, R5) 4000 Hard Chrome-Plated Steel F 70 mm (V-Grooved) 4000 Hard-Coated aluminium FB 70 mm (V-Grooved) 4000 Tempered Steel B6 29.5 mm (6mm width) 2000 Hardened Steel, Ribbon Roller B10 29.5 mm (10mm width) 2000 Hardened Steel, Ribbon Roller Output Signal Possibilities Standard Output signal: 0 - 1 VDC Code A2 Output signal: 0 - 10 VDC Code A3 Output signal: 4 - 20 mA DC Code A10 Output signal: mV/V for sensors without amplifier Code 232 Output signal: -digital: RS 232 -analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Code 232-H Output signal: -digital: RS 232 -analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Downloads Hans-Schmidt FSR Tension Sensors, Online - Data Sheet Hans-Schmidt FSR Tension Sensors, Online - Certificate Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-fsr-tension-sensors-online-p-2119.html Wed, 25 Oct 2023 22:33:40 +0000 USD 2119 Hans-Schmidt 1000 FSR https://www.abqindustrial.net/store/images/hans-schmidt-fsr-online-tension-sensor.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/hans-schmidt-scv-1-amplifier-tension-indicators-amplifiers-p-2118.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2118 ]]>For use with sensors providing mV/V output Provides ZERO and GAIN Adjustment Pots for Calibration purposes Requires 15-24V DC power source Strain gauge amplifier for sensors without integrated amplifier (mV/V output) Convenient for all sensors of TS2, TSC and SF series Tension Sensors Designed for DIN Rail Mounting Kit Contents Hans-Schmidt SCV-1 Amplifier Tension Indicators & Amplifiers Certificate of Compliance with the order 2.1 according EN 10204 free of charge Operating Instruction Features For use with sensors providing mV/V output Provides ZERO and GAIN Adjustment Pots for Calibration purposes Output signals:Analog: 0 - 1 V DC (standard) | Analog: 0 - 10 V DC (option A2) | Current: 4 - 20 mA (option A3) DIN Rail Mounting Requires 15-24V DC power source CE certified with sensor connected LED Indicator shows Power to Amplifier Specifications Output signal analog: 0 - 1 V DC /R (Last) ≥ 5kΩ analog 0 - 10 V DC (option) 4 - 20 mA instead of 0 - 10 V DC Input signal mV/V Power supply 15 - 24 V DC, 50 mA Temperature range 10 - 45° C Air humidity 85 % RH, max. Housing Plastics Dimensions 90 x 56 x 18 mm (LxWxH), DIN EN 60715 tophat rail box Weight, net (gross) Approx. 53 g Downloads Hans-Schmidt SCV-1 Amplifier Tension Indicators & Amplifiers - Data Sheet Hans-Schmidt SCV-1 Amplifier Tension Indicators & Amplifiers - Instruction Manual Hans-Schmidt SCV-1 Amplifier Tension Indicators & Amplifiers - Output Signal Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/hans-schmidt-scv-1-amplifier-tension-indicators-amplifiers-p-2118.html Wed, 25 Oct 2023 21:07:28 +0000 USD 2118 Hans-Schmidt 1000 SCV-1 https://www.abqindustrial.net/store/images/hans-schmidt-scv-1-amplifier.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cls-cantilever-load-sensor-p-2117.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2117 ]]>Cantilever Load Sensor For precise measurement of web tension in a wide range of industrial applications including non-wovens, and films Measuring Ranges from 20N (2kg) up to 3kN (300kg) The CLS Cantilever Load Sensor is designed for precise measurement of web tension in a wide range of industrial applications including non-wovens, and films Related Products TS621 Strain Gauge Amplifier Provides an accurate tension display for all Check-Line sensors on a bright LED display RMA-CSW Cantilever Measuring Roll Ranges from 0 - 200 N to 0 - 1200 N CSW Narrow Web Tension Sensor Ranges from 0 - 5 N to 0 - 5000 N Downloads CLS Cantilever Load Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cls-cantilever-load-sensor-p-2117.html Wed, 25 Oct 2023 20:53:59 +0000 USD 2117 1000 CLS https://www.abqindustrial.net/store/images/honigmann-cls-cantilever-load-sensor.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/dillon-ttxl-high-capacity-cable-tension-meter-p-2116.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2116 ]]>High Capacity Cable Tension Meter 26500 lb / 120 kN / 12000 kg Capacity Measures cables from 3/4" - 1.-17/64" / 19-32mm TTXL Capacity: 26500 lb / 120 kN / 12000 kg Cable Diameter Range: 3/4" - 1-17/64" / 19-32mm TTXL-V2 Capacity: 33,000 lb / 150 kN / 15000 kg Cable Diameter Range: 1/2" - 1" / 11-25mm The Dillon TTXL High-Capacity Cable Tension Meter is designed to measure tension quickly and accurately on guy wires, zip lines, guardrails, utility lines, and other applications where wire rope is fixed between two points. It installs, measures, and removes in seconds. The TTXL features a precision loadcell for highly accurate measurements that do not require lookup or correction tables. Kit Contents Dillon TTXL High-Capacity Cable Tension Meter Calibration Certificate Carrying Case Instruction Manual Features Includes Calibration Certificate 1 Year Warranty Stores calibrations for up to 20 unique wire sizes and types up to 1 inch max. (25 mm) CE Certified Portable and rugged – designed for outdoor use Telescoping handle engages meter quickly with minimal effort Uses stanadrd AA Batteries for up to 120 hours of use User-selected units of measure of Lbf, Kgf or Newtons Calibration available for Alumoweld Cables Specifications Capacity TTXL 26500 lb / 120 kN / 12000 kg TTXL-V2 33,000 lb / 150 kN / 15000 kg Resolution (Selectable) Low 50lb/20Kg - Med 20lb/10Kg - High 10lb/5Kg *Default Setting is Medium Wire sizes TTXL 3/4" - 1-17/64" / 19-32mm TTXL-V2 1/2" - 1" / 11-25mm Accuracy ±3% instrument capacity Number of calibrations Up to 20 can be stored independently Operating Temperature -4°F to 158°F (-20°C to 70°C) Loading error Cable elongation of only 0.08 inch (2mm) Display Informative Display: Shows Unit, Wire Type, Sheave & Battery; Date and Time Included Calibration Reminder Included (set by factory) Backlight Included (configurable intensity and timer) Power AA batteries x2 Battery Life 10 Hz = over 250 hours continuous 100Hz = over 100 hours continuous *Tested with blacklight off AZT (Automatic Zero Tracking) & Filtering Configurable AZT and Filtering Carrying Case Included RS-232 Port 4-Pin Lemo RS-232 output Units Of Measure pound-force, kilogram force, Newtons Environment protection Suitable for continued outdoor use Dimensions 10 x 23 x 3 inch (25 x 59 x 8 cm) Weight Approx 11 lb (5 kg) Shipping Weight 30 lbs (14 kg) Shipping Dimensions 28 x 16 x 7 inches (71 x 41 x 18 cm) with carrying case Warranty 2 Years Related Products Dillon Quick-Check "Red" Cable Tension Meter 2 Ranges, up to 10,000lb Capacity Measures cables from 3/16" to 1" / 5 mm to 25 mm (OD) Dillon Quick Check-T Tension Meter with Bluetooth Output 10,000 lb/45 kN/4500 kg Capacity Measures cables from 3/16" to 1" Checkline RTM 20D High Capcity Cable Tension Meter 4 Rangers up to 44,000 lbf Capacity High-Capacity Cable Tension Meter Downloads Dillon TTXL High-Capacity Cable Tension Meter - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/dillon-ttxl-high-capacity-cable-tension-meter-p-2116.html Wed, 25 Oct 2023 20:37:59 +0000 USD 2116 Dillon 1000 TTXL https://www.abqindustrial.net/store/images/dillon-ttxl-high-capacity-cable-tension-meter.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/stf-3550-strap-tension-meter-p-2115.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2115 ]]>Strap Tension Meter to measure the tension of 35 mm or 50 mm wide lashing straps. VDI Guideline 2700 / DIN EN 12195-1 / DIN EN 12195-2 / TUL-LO Certified by: TUL-LOG 01-2012 The STF-3550 Strap Tension Meteris used to measure the tension of 35 mm or 50 mm wide lashing straps. It meets the requirements of: VDI Guideline 2700 Securing cargo on road vehicles DIN EN 12195-1 Calculating the lashing forces DIN EN 12195-2 Lashing straps made from synthetic fibers Certified by: TUL-LOG 01-2012 Kit Contents STF-3550 Strap Tension Meter Protection and storage case Manual Features Scale values ​​at straps width 35 mm: 150 daN, 250 daN, 350 daN, 450 daN Scale values ​​at straps width 50 mm: 250 daN, 350 daN, 450 daN,550 daN, 650 daN Suitable for lashing with a strap width of 35 mm or 50 mm. Easy handling, quick to use Specifications For lashes with width 35mm & 50mm Meets requirements VDI Guideline 2700, DIN EN 12195-1, DIN EN 12195-2 Certified by TUL-LOG 01-2012 Scale values ​​at straps width 35 mm 150 daN, 250 daN, 350 daN, 450 daN Scale values ​​at straps width 50 mm 250 daN, 350 daN, 450 daN,550 daN, 650 daN Weight 1.43 kg Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/stf-3550-strap-tension-meter-p-2115.html Wed, 25 Oct 2023 20:11:25 +0000 USD 2115 Checkline 995 STF-3550 https://www.abqindustrial.net/store/images/stf-3550-strap-tension-meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-walls-and-roofs-c-107_137_161/tramex-mex5-moisture-encounter-and-humidity-meter-p-2114.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2114 ]]>Moisture and Humidity meter for building and home inspection With optional pin and relative humidity probes Deep Depth penetration of up to 1¼" (30mm) and Shallow Depth penetration of up to ⅜" (10mm) The Tramex MEX5 Moisture Encounter is a digital Dual-Depth, non-destructive moisture and humidity meter, ideal for surveying moisture and humidity conditions in building structures. The Tramex MEX5 Moisture Encounter measures moisture content in wood and drywall and provides comparative readings in various building materials such as roofing, plaster, tile and masonry. It also features a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates optional external in-situ RH probes for in-situ equilibrium RH readings, as well as Pin probes for wood, drywall, and WME readings. These individual and collective features make the Tramex MEX5 Moisture Encounter an essential and indispensable asset for professionals in the building moisture inspection and restoration industry. Dual depth measuring range The Tramex MEX5 Moisture Encounter features dual depth measuring range. Deep Depth penetration of up to 1¼" (30mm) and Shallow Depth penetration of up to ⅜" (10mm). The dual depth readings of surface and core moisture can be compared to eliminate the influence of the substrate when testing coverings. The pinless moisture meter measures moisture content % of wood from 0-30%. The meter can be expanded with the use of pin probes for wood, wood by-products and drywall as well as relative humidity sensor probes for evaluating ambient conditions. All moisture and humidity readings can be visualised and Geotagged with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Kit Contents Tramex MEX5 Moisture Encounter Free App available for Android and iOS Operating Instructions​ One (1) year warranty Features NDT - Non destructive testing %MC dual depth measurement of wood Comparative dual depth of drywall, roofing, plaster, tile and masonry Dual depth comparative readings of surface and core moisture for eliminating influence of substrate on moisture testing of coverings LED indicator Low/Med/High for all NDT scales Built-in Hygrometer readings on permanent display Built-in Surface Temperature Infrared Thermometer Adjustable Specific Gravity for NDT wood readings Baseline reference reading set point adjuster to compare to known dry / drying goal reading Built-in hygrometer and Infrared Surface Thermometer Psychrometric evaluations of Ambient RH, Temp, Dew Point Temp, Humidity Ratio (GPP, g/kg) Sufrace Temperature Delta Temperature value Enthalpy readings Emissivity adjustment for surface temperature correction Pin Probe (optional plug-in probe) Variety of external pin probes and electrodes can be used %MC wood, pre-set international standards / access to various preset wood species WME readings Drywall %MC Auto calibration check Temperature correction of %MC in wood EMC Expected Moisture Content indication based on ambient conditions and wood selection In-Situ Equilibrium RH Probe (optional plug-in probe) Variety of external RH probes can be used: In-situ RH probes for concrete moisture testing In-situ RH for probes for the building envelope, building materials, insulation, crawl spaces, HVAC systems. Uses Locating moisture-related problems and relative humidity issues within and behind a variety of building materials in the building envelope. Mapping the extent of moisture damage caused to buildings. Monitoring progressive drying conditions in the drying process of building materials and surfaces. Dual-Depth penetration allows for comparison of surface and core moisture and elimination of substrate influence on the testing of coverings. Specifications Size 7.1" x 3.4" x 1.6" (180mm x 85mm x 40mm) Weight 10.22 oz (290g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital 2.3" x 1.4" (58mm x 35mm) Depth of penetration Shallow signal: up to ⅜" (10mm) Deep signal: up to 1¼" (30mm) Range NDT Moisture content for Wood 0 - 30% MC NDT Comparative for Building Materials 0 - 100 Pin % MCWood 6 - approx 50% MC Pin % MC Drywall 0 - 8.5% MC Relative Humidity 0 - 99% With optional Hygro-i2 ® Probe Humidity accuracy: 0% - 99%RH +/- 2% @ 25°C / 77°F How It Works Moisture Meter Design The Tramex MEX5 Moisture Encounter detects and evaluates moisture conditions within various building materials by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture in the material under test. The Tramex MEX5 Moisture Encounter determines the strength of the current and converts this to a moisture content value, displaying it on the large display. Downloads Tramex MEX5 Moisture Encounter - Data Sheet Tramex MEX5 Moisture Encounter - Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-walls-and-roofs-c-107_137_161/tramex-mex5-moisture-encounter-and-humidity-meter-p-2114.html Fri, 29 Sep 2023 04:11:21 +0000 USD 2114 Tramex 995 MEX5 https://www.abqindustrial.net/store/images/tramex-mex5-moisture-encounter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-px-30-moisture-meter-for-paper-p-2113.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2113 ]]>Large, custom display with auto backlight – easy toread under all conditions On-screen readings statistics – High, Low, Average,Standard Deviation, view all readings Bluetooth® connectivity The Delmhorst PX-30 Moisture Meter for Paper is the latest in the new NavigatorTM family of moisture meters from Delmhorst. Uniquely designed for use in the field, theDelmhorst PX-30 Moisture Meter for Paper features a dashboard-like display that is easy to read under most conditions, and large, easy to use navigation buttons. With the Delmhorst PX-30 Moisture Meter for Paper, the contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The Delmhorst PX-30 Moisture Meter for Paper is especially useful for testing paperboard, corrugated stock, and paper cores and tubes. They are ideal for QC personnel, buyers, and salespeople. The Delmhorst PX-30 Moisture Meter for Paper includes Bluetooth®, enabling connection to the Delmhorst EDGE™ app with customizable settings and the ability to share the data from anywhere. Kit Contents Delmhorst PX-30W/CS Moisture Meter For Paper Delmhorst PX-30 Moisture Meter for Paper Small Carrying case Delmhorst PX-30/P01 Moisture Meter For Paper Delmhorst PX-30 Moisture Meter for Paper Larger Carrying Case to fit an Electrode *Electrode & Prod Not Included *Electrode & Prod Sold Separately Delmhorst PX-30/P02 Moisture Meter For Paper Delmhorst PX-30 Moisture Meter for Paper H-4 handle 830-2 10" prod Larger Carrying Case Features Large, custom display with auto backlight – easy to read under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, view all readings Moisture Range: 4.3%-18% MC for paper (kraft paper calibration) 5%-40% for baled scrap paper 0 - 100 reference scale for obtaining relative moisture levels on other materials without calibration Bluetooth® connectivity Color-coded LEDs – adjustable through EDGE™ app Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer - set to 1m, 4m, or 10m Compatible with existing Delmhorst prods and electrodes (see below) The Delmhorst EDGE™ app offers: Timestamp and geotag Data export to .csv format Save unlimited readings Customized LED ranges Specifications Power 2x AA batteries QR code On meter for easy access to support materials and meter registration Size Meter only - 8.65in x 2.85in x 1.55in (2.2mm x 72mm x 39mm) Weight Meter only - 0.4.5oz (1.3g) Hard plastic Carrying case included Warranty 2-year limited warranty on manufacturer’s defects; bonus 3-month extended warranty with on-line registration Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 12-E Double roller type for measuring moisture content on a moving web 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 43-E Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs. 55-E Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing Downloads Delmhorst PX-30 Moisture Meters for Paper - Data Sheet Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-px-30-moisture-meter-for-paper-p-2113.html Wed, 22 May 2024 02:13:37 +0000 USD 2113 Delmhorst 991 PX-30 https://www.abqindustrial.net/store/images/delmhorst-px-30-moisture-meters-for-paper.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-px-20-moisture-meter-for-paper-p-2112.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2112 ]]>Large, custom display with auto backlight – easy toread under all conditions On-screen readings statistics – High, Low, Average,Standard Deviation, view all readings Internal calibration check The Delmhorst PX-20 Moisture Meter is the latest in the new NavigatorTM family of moisture meters from Delmhorst. Uniquely designed for use in the field, the Delmhorst PX-20 Moisture Meter for Paper features a dashboard-like display that is easy to read under most conditions, and large, easy to use navigation buttons. With the Delmhorst PX-20, the contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The Delmhorst PX-20 is especially useful for testing paperboard, corrugated stock, and paper cores and tubes. They are ideal for QC personnel, buyers, and sales people. Kit Contents Delmhorst PX-20W/CS Moisture Meter For Paper Delmhorst PX-20 Moisture Meter for Paper Small Carrying case Delmhorst PX20/P01 Moisture Meter For Paper Delmhorst PX-20 Moisture Meter for Paper Larger Carrying Case to fit an Electrode *Electrode & Prod Not Included *Electrode & Prod Sold Separately Features Large, custom display with auto backlight – easy to read under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, view all readings Moisture Range: 4.3%-18% MC for paper (kraft paper calibration) 5%-40% for baled scrap paper 0 - 100 reference scale for obtaining relative moisture levels on other materials without calibration Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer - set to 1m, 4m, or 10m Compatible with existing Delmhorst prods and electrodes (see below) The Delmhorst EDGETM app offers: Timestamp and geotag Data export to .csv format Save unlimited readings Customized LED ranges Multi-language Specifications Power 2x AA batteries QR code On meter for easy access to support materials and meter registration Size Meter only - 8.65in x 2.85in x 1.55in (2.2mm x 72mm x 39mm) Weight Meter only - 0.4.5oz (1.3g) Hard plastic Carrying case included Warranty 2-year limited warranty on manufacturer’s defects; bonus 3-month extended warranty with on-line registration Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 12-E Double roller type for measuring moisture content on a moving web 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 43-E Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs. 55-E Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing Downloads Delmhorst PX-20 Moisture Meters for Paper - Data Sheet Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-px-20-moisture-meter-for-paper-p-2112.html Wed, 22 May 2024 02:13:09 +0000 USD 2112 Delmhorst 1000 PX-20 https://www.abqindustrial.net/store/images/delmhorst-px-20-moisture-meters-for-paper.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coatings-miscellaneous-c-97_55/defelsko-positest-pt-pencil-hardness-test-p-2111.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2111 ]]>Determines the film hardness by pencil test (Wolff-Wilborn) in accordance with ISO 15184 and ASTM D3363 Conforms to ISO 15184, ASTM D3363, JIS K-5600, BS 3900-E19, MIL C 27 227, ECCA-T4-1, SNV 37113, SIS184187, NEN 5350 Determines the film hardness by pencil test (Wolff-Wilborn) in accordance with ISO 15184 and ASTM D3363 Quickly and easily evaluate the scratch resistance and relative hardness of coatings 14 quality graphite pencils-6B to 6H hardness values in a protective case Custom aluminum pencil sharpener specifically designed for the Pencil Hardness Test-includes 5 and 6 mm reference marks for precision graphite length Comes complete with everything needed for testing Optional Pencil Cart exerts a constant force of 7.35 N (~1.65 lbf) at the specified 45° angle (included with Complete Kit) Conforms to ISO 15184, ASTM D3363, JIS K-5600, BS 3900-E19, MIL C 27 227, ECCA-T4-1, SNV 37113, SIS184187, NEN 5350 Kit Contents DeFelsko PTKITB PosiTest PT Basic Kit 14 Graphite Pencils (6B to 6H) Custom Aluminum Pencil Sharpener Pack of 400 Grit Sandpaper Instruction Manual Pencil Cart with Leveling Rod Not Included DeFelsko PTKITC PosiTest PT Complete Kit 14 Graphite Pencils (6B to 6H) Custom Aluminum Pencil Sharpener Pack of 400 Grit Sandpaper Pencil Cart with Leveling Rod Hard shell carrying case Instruction Manual DeFelsko PTCART PosiTest PT Pencil Cart Only Pencil Cart Leveling Rod Features Quickly and easily evaluate the scratch resistance and relative hardness of coatings in accordance with ISO 15184 and ASTM D3363 For use on paint, films, lacquer, and resins 14 quality graphite pencils-6B to 6H hardness values – in a protective aluminum case-6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H Custom aluminum pencil sharpener with hardened steel blades specifically designed for the Pencil Hardness Test. Includes 5 and 6 mm reference marks for precision graphite length in conformance to national and international standards. Included pack of 400 grit sandpaper for flattening pencil leads prior to testing Comes complete with everything needed for testing Pencil Cart Features Optional Pencil Cart exerts a constant force of 7.35 N (~1.65 lbf) at the specified 45° angle (included with the Complete Kit) Included Leveling Rod ensures the cart is parallel to the surface Convenient thumbscrew allows for quick pencil changes Accessories DeFelsko Replacement PencilsReplacement pencils are available as a complete set of 14 or as a 12 pack for individual hardnesses DeFelsko PTPENCILSET Complete Set of 14 Replacement Pencils one each-6B to 6H DeFelsko PTPENCIL6H - 12 Pencils of Individual Hardness - 6H DeFelsko PTPENCIL5H - 12 Pencils of Individual Hardness - 5H DeFelsko PTPENCIL4H - 12 Pencils of Individual Hardness - 4H DeFelsko PTPENCIL3H - 12 Pencils of Individual Hardness - 3H DeFelsko PTPENCIL2H - 12 Pencils of Individual Hardness - 2H DeFelsko PTPENCILH - 12 Pencils of Individual Hardness - H DeFelsko PTPENCILF - 12 Pencils of Individual Hardness - F DeFelsko PTPENCILHB - 12 Pencils of Individual Hardness - HB DeFelsko PTPENCILB - 12 Pencils of Individual Hardness - B DeFelsko PTPENCIL2B - 12 Pencils of Individual Hardness - 2B DeFelsko PTPENCIL3B - 12 Pencils of Individual Hardness - 3B DeFelsko PTPENCIL4B - 12 Pencils of Individual Hardness - 4B DeFelsko PTPENCIL5B - 12 Pencils of Individual Hardness - 5B DeFelsko PTPENCIL6B - 12 Pencils of Individual Hardness - 6B DeFelsko PTBLADES Replacement Blades Replacement Blades (qty 10) for PosiTest PT Pencil Sharpener DeFelsko CHDTMAG10X Illuminated 10x Magnifier For visual assessment of scratch and gouge marks Downloads DeFelsko PosiTest PT Pencil Hardness Test - Data Sheet DeFelsko PosiTest PT Pencil Hardness Test - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coatings-miscellaneous-c-97_55/defelsko-positest-pt-pencil-hardness-test-p-2111.html Sun, 18 Feb 2024 14:15:31 +0000 USD 2111 DeFelsko 994 PT https://www.abqindustrial.net/store/images/defelsko-positest-pt-pencil-hardness-test.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-positest-dt-dust-tape-test-p-2110.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2110 ]]>Assesses the quantity and size of dust particles on blast cleaned surfaces in accordance with ISO 8502-3 Conforms to ISO 8502-3, AS 3894.6, US Navy PPI 63101-000 Assesses the quantity and size of dust particles on blast cleaned surfaces in accordance with ISO 8502-3 Includes all report forms and accessories required for dust tape testing in accordance with ISO 8502-3 Can be used as a pass/fail test or to provide a permanent record of the dust present on a surface Illuminated 10x Magnifier with stand-off to keep the magnifier at the appropriate distance away from the substrate-compact, foldable design for easy storage Dust Test Comparator includes pictorial references from ISO 8502-3 to determine dust size and dust quantity rating Reusable Transparent Display Board Conforms to ISO 8502-3, AS 3894.6, US Navy PPI 63101-000 Kit Contents DeFelsko DTKIT PosiTest DT Dust Tape Test Roll of ISO 8502-3 Tape-25 mm wide Scissors Illuminated 10x Magnifier (with batteries) Dust Test Comparator Transparent Display Boards 25 pack of Report Forms Multi-language Instruction Manual Hard Shell Plastic Case with custom foam insert Instruction Manual Two (2) year Warranty PosiTest DT Dust Tape Roller Sold Separately DeFelsko DTROLLER PosiTest DT Dust Tape Test Instruction Manual Two (2) year Warranty Features Includes all report forms and accessories required for dust tape testing in accordance with ISO 8502-3 Can be used as a pass/fail test or to provide a permanent record of the dust present on a surface Illuminated 10x Magnifier with stand-off to keep the magnifier at the appropriate distance away from the substrate-compact, foldable design for easy storage Report forms include all information as required by ISO 8502-3 Dust Test Comparator includes pictorial references from ISO 8502-3 to determine dust size and dust quantity rating Reusable Transparent Display Board Suitable for field or laboratory use Durable Hard shell case keeps content secure Optional spring-loaded Dust Tape Roller available to apply constant force as recommended by ISO 8502-3 Accessories DeFelsko Replacement Display Boards and Report Forms Includes: 1 - Dust Test Comparator 1 - Transparent Display Board 4 - 25 Pack of Report Forms DeFelsko CHDTISOTAPE Replacement ISO Tape 4-in-1 Replacement Blades for PosiTest CH Cross Hatch Tool 1 Roll of ISO 2409/8502-3 Tape - 1" x 72 yards/roll (25 mm x 65.8 meters/roll) Downloads DeFelsko PosiTest DT Dust Tape Test - Data Sheet DeFelsko PosiTest DT Dust Tape Test - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-positest-dt-dust-tape-test-p-2110.html Mon, 28 Aug 2023 14:01:26 +0000 USD 2110 DeFelsko 990 DT https://www.abqindustrial.net/store/images/defelsko-positest-dt-dust-tape-test.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-positest-ch-cross-hatch-adhesion-test-p-2109.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2109 ]]>Determines a coating's ability to resist separation from a substrate when a lattice pattern is cut into the coating in accordance with ISO 2409 and ASTM D3359 Conforms to ISO 2409/16276-2, ASTM D3359, AS 3894.9/1580.408.4, JIS K 5600-5-6 Determines a coating's ability to resist separation from a substrate when a lattice pattern is cut into the coating in accordance with ISO 2409 and ASTM D3359 Includes all tools and accessories required for cross hatch testing Ergonomic tool handle with non-slip grip provides comfortable all-day use Pivoting cutting head ensures proper positioning and equal pressure across the cutting surface Easy to replace, high-grade hardened steel blade with 4 cutting edges for longer testing Choice of adhesive tape conforms to ISO 2409 or ASTM D3359 Conforms to ISO 2409/16276-2, ASTM D3359, AS 3894.9/1580.408.4, JIS K 5600-5-6 Kit Contents DeFelsko PosiTest CH Cross Hatch Adhesion Test 4-in-1 blade Magnifier - 3X (ISO) or 10X (ASTM) Adhesive Tape - ISO or ASTM Brush Scissors 3/32" hex key ISO / ASTM classification reference chart Hard Shell Case Instruction Manual Two (2) year Warranty Features Includes all tools and accessories required for cross hatch testing in accordance with ISO 2409 and ASTM D3359 Ergonomic tool handle with non-slip grip provides comfortable all-day use Pivoting cutting head ensures proper positioning and equal pressure across the cutting surface Easy to replace, high-grade hardened steel blade with 4 cutting edges for longer testing Ideal for coatings up to 250 μm (10 mils) depending on blade and Standard Wide range of 4-in-1 cutting blades available for different Standards, coating thicknesses, and substrates. Tool is compatible with all DeFelsko cutting blades. Illuminated Magnifier available with 3x or 10x magnification depending on Standard Brush included to remove any detached flakes from the coating Choice of adhesive tape conforms to ISO 2409 or ASTM D3359 Durable hard shell case keeps contents secure Kit Options PosiTest CH Cross Hatch Adhesion Test is offered in 5 kits-3 in accordance with ISO 2409 and 2 in accordance with ASTM D3359 Use the tables below to select the appropriate blade based on the Standard and the thickness of coating to be tested. ISO 2409 Coating Thickness SpecifiedBlade(Spacing/# of Cuts)t PosiTest CH CrossHatch AdhesionTester Kit 4-in-1ReplacementBlades µm mils 0 - 60 0 - 2.3 1 mm / 6 Teeth* CHKITISO6X1 CHBLADE6X1 61 - 120 2.4 - 4.7 2 mm / 6 Teeth CHKITISO6X2 CHBLADE6X2 121 - 250 4.7 - 9.8 3 mm / 6 Teeth CHKITISO6X3 CHBLADE6X3 For soft substrates (e.g. wood and plaster), use 2 mm / 6 Teeth for coating thicknesses between 0 - 120 μm (0 - 4.7 mils) ASTM D3359 Coating Thickness SpecifiedBlade(Spacing/# of Cuts)t PosiTest CH CrossHatch AdhesionTester Kit 4-in-1ReplacementBlades µm mils 0 - 50 0 - 2 1 mm / 11 Teeth CHKITASTM11X1 CHBLADE11X1 51 - 125 2 - 5 2 mm / 6 Teeth CHKITASTM6X2 CHBLADE6X2 Accessories DeFelsko Replacement Tape Roll of replacement tape for PosiTest CH Cross Hatch Adhesion TestAvailable for PosiTest CH ASTM Kit and PosiTest CH ISO Kit. DeFelsko CHDTISOTAPE Replacement ISO Tape 1 Roll of ISO 2409/8502-3 Tape 1" x 72 yards/roll (25 mm x 65.8 meters/roll) DeFelsko CHASTMTAPE Replacement ASTM Tape Roll of ASTM D3359 Tape 1" x 90 yards/roll (25 mm x 82.3 meters/roll) DeFelsko Replacement Blades4-in-1 Replacement Blades for PosiTest CH Cross Hatch Tool DeFelsko CHBLADE6X1 Replacement Blade for ISO 2409 Cross Hatch Test - 1 mm / 6 Teeth DeFelsko CHBLADE6X2 Replacement Blade for ISO 2409/ASTM D3359 Cross Hatch Test - 2 mm / 6 Teeth DeFelsko CHBLADE6X3 Replacement Blade for ISO 2409 Cross Hatch Test - 3 mm / 6 Teeth DeFelsko CHBLADE11X1 Replacement Blade for ASTM D3358 Cross Hatch Test - 1 mm / 11 Teeth Downloads DeFelsko PosiTest CH Cross Hatch Adhesion Tester - Data Sheet DeFelsko PosiTest CH Cross Hatch Adhesion Tester - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-positest-ch-cross-hatch-adhesion-test-p-2109.html Fri, 01 Sep 2023 22:28:24 +0000 USD 2109 DeFelsko 990 CH https://www.abqindustrial.net/store/images/defelsko-positest-ch.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-in-kiln-monitoring-kil-mo-trol-system-p-2108.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2108 ]]>Track wood drying progress Pinpoint problem areas in the kiln Determine end-point for shutdown The Delmhorst In-Kiln Monitoring / Kil-Mo-Trol System is ideal for dehumidification kilns and small drying operations, KIL-MO-TROL® lets you monitor the moisture content of lumber during the drying process. With testing stations at each lumber package and a rotary switch box in your control room, you can quickly get an overall view of your progress. Proven for both hardwood and softwood drying, the KIL-MO-TROL can be used in any type of dry kiln, pre-dryer, or air-drying operation. Track wood drying progress Pinpoint problem areas in the kiln Determine end-point for shutdown Easy to Order Just call us at 1-888-275-5772! Please have the following information available when you call, so we can prepare a customized package for your kiln: Sketch of your kilns indicating dimensions, control room and loading door locations. Also indicate desired location of monitor and type of material and kiln walls. Board foot capacity and whether package or track-type kilns. Species and thickness of lumber you typically dry. Designate if you require shell and core, or core-only readings. Also include any information specific to your installation or application that may be useful for us to know. Features Pins Shell & Core Lengths — the KIL-MO-TROL system comes with the option to measure both shell and core moisture content. Knowing the difference between shell and core moisture will help you make more informed drying decisions. Insulated for Core Reading — With pins that are insulated except at the tip, you can obtain core readings which provide a true indication of moisture content at a known depth. Cables Banana Plugs — Allow for quick and easy connection of cables to contact pins. Teflon®-insulated Sheathing — Designed to withstand the harsh environment of your kiln. Molded connectors — Large, easy-to-handle connectors ensure that each station is securely connected to the rotary switch in your control room. These connectors are molded directly to the cable, and are virtually corrosion and moisture proof. Install It’s as easy as mounting your rotary station selector switch, running main cables out of the control room, installing pins and load cables at each station, and connecting the main and load cables. Then connect a Delmhorst moisture meter to the station selector and start taking readings! We’re here to support you through every step of your operation with installation instructions and best practices. With an experienced service team solely focused on your satisfaction, Delmhorst is THE source for all your moisture monitoring needs. Downloads Delmhorst In-Kiln Monitoring / Kil-Mo-Trol System - Guide Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-in-kiln-monitoring-kil-mo-trol-system-p-2108.html Wed, 07 Feb 2024 19:42:41 +0000 USD 2108 Delmhorst 1000 IN-KILN https://www.abqindustrial.net/store/images/delmhorst-in-kiln-monitoring-kil-mo-trol-system-guide.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdckit-positest-hhd-c-high-voltage-holiday-detector-p-2107.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2107 ]]>Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected The PosiTest HHD C High voltage Holiday Detector uses continuous DC technology to detect holidays, pinholes, and other discontinuities on metal and concrete substrates Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue Regulated pulse DC voltage output that won't change under load -±5% voltage accuracy Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Extensive electrode options - choose from a wide range of rolling spring and flat wire brush electrodes or use electrodes from other manufacturers with optional adaptors - custom sizes available upon request Long Form Certificate of Calibration included with each instrument Conforms to ASTM D4787/D5162/G62, ISO 29601, NACE SP0188/SP0274/SP0490, AS3894.1 Kit Contents DeFelsko PosiTest HHD High voltage Holiday Detector Wand Style 7.6 m (25') ground (earth) cable with ground clip 72 Wh Li-ion battery pack with built-in charge state indicator Smart charger with universal AC voltage input Stainless steel fan brush 50 cm (20" ) electrode rod with thumb screw Shoulder strap Instruction Manual Durable Pelican Storm case Long Form Certificate of Calibration traceable to NIST Two year warranty Features Simple Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected Lightweight, ergonomic design provides comfortable all-day use, reducing fatigue Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Durable Rugged, environmentally sealed ABS plastic enclosure Weatherproof, dustproof, and shockproof Included hard shell case with custom foam inserts for superior protection Two year warranty Accurate Built-in certified voltmeter (crest meter, jeep meter) displays and regulates the voltage at the electrode Long Form Certificate of Calibration included with each instrument Conforms to national and international standards including ISO, ASTM, and NACE Powerful Strobe light and loud audible alarms emitted when a holiday is detected. Audio alarm mode can be adjusted for differing environments. Removable Smart lithium-ion battery with built-in charge state indicator Versatile A wide range of rolling spring electrodes and wire brushes are available. Custom sizes available upon request. Optional handheld wand accessory coverts the detector into a wand configuration ideal for testing hard-to-reach areas (suitable for voltages < 15 kV) Industry-standard connectors and adaptors for compatibility with nearly all existing electrodes User adjustable voltage range from 0.5 – 35 kV Safe Press and hold Safety Trigger helps prevent accidental high voltage generation 7.6 m (25') ground (earth) cable with locking connector and spring clamp Shock proof/creep proof - internally sealed to minimize creep distance to high voltage components. Designed in accordance with IEC 61010-1. Specifications Output Voltage Range 0.5-35 kV Output Voltage Adjustment 0.5 kV-1 kV: 10 Volt Steps1 kV-35 kV: 100 Volt Steps Output Accuracy ±5% Pulse Duration 10 μs Pulse Repetition Rate 30 Hz Coating Thickness Range up to 20 mm (780 mils)* Operating Temperature -20° to 60°C (-4° to 140°F) Case Pelican Storm extreme duty waterproof case Included Electrode Rod 50 cm (20") Shoulder Strap Included Battery Size 72 Wh Li-ion Typical Battery Life for selected rolling springs @ 10 kV - Ø 12" 40 hrs. Typical Battery Life for selected rolling springs @ 10 kV - Ø 40" 30 hrs. Weight 12 kg (27 lbs.) Dimensional Weight 19 kg (42 lbs.) Electrodes Rolling Spring Electrodes Rolling Spring Coil for 4" pipe (102 mm) OD HHDSPRING4 Rolling Spring Coil for 6" pipe (152 mm) OD HHDSPRING6 Rolling Spring Coil for 8" pipe (203 mm) OD HHDSPRING8 Rolling Spring Coil for 12" pipe (304 mm) OD HHDSPRING12 Rolling Spring Coil for 14" pipe (356 mm) OD HHDSPRING14 Rolling Spring Coil for 16" pipe (406 mm) OD HHDSPRING16 Rolling Spring Coil for 20" pipe (508 mm) OD HHDSPRING20 Rolling Spring Coil for 24" pipe (610 mm) OD HHDSPRING24 Please Note:Each spring includes two pre-installed spring couplers. A spring connector (HHDCONNECT) is required to attach the PosiTest HHD to the spring couplers. Custom sizes and bulk pricing available. Additional couplers (HHDCOUPLER - 2 pack) are available. Flat Wire Brush Electrodes HHD Flat Brush 51 mm/2" HHDFLTBRSH2 HHD Flat Brush 152 mm/6" HHDFLTBRSH6 HHD Flat Brush 203 mm/8" HHDFLTBRSH8 HHD Flat Brush 305 mm/12" HHDFLTBRSH12 HHD Flat Brush 610 mm/24" HHDFLTBRSH24 HHD Flat Brush 914 mm/36" HHDFLTBRSH36 HHD Flat Brush 1219 mm/48" HHDFLTBRSH48 Flat Wire Brush Electrodes Half-Circle Neoprene Brush for 50-127 mm/2-5" pipe OD HHDHCBRSH5 Accessories Rolling Spring Electrodes Steel pipe electrodes-assorted sizes available: 10 to 60 cm (4 – 24") Rolling springs include two pre-installed spring couplers Flat Wire Brush Electrodes Stainless steel-assorted sizes available: 5 to 120 cm (2 – 48") Replacement Fan Brush Electrode Stainless steel-5 cm (2") Handheld Wand Converts the PosiTest HHD to a wand-type instrument *PosiTest HHD sold separately Extension Rods Choose between 13 cm (5") and 50 cm (20") rods Electrode Adaptors Connect to spring and brush electrodes from other manufacturers PosiTest HHD Verifier Standalone voltmeter (crest meter, jeep meter) for verifying the accuracy and operation of ALL pulse type and DC holiday detectors Spring Couplers Thread onto rolling springs and attach to the Spring Connector Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes HHD Half-Circle Neoprene Brush 50–127mm/2-5" Neoprene half-circle brush electrode for PosiTest HHD series - good for pipes 50 to 127 mm / 2 to 5 inches Downloads DeFelsko PosiTest HHD High Voltage Holiday Detector - Data Sheet DeFelsko PosiTest HHD High Voltage Holiday Detector - Instruction Manual English, Spanish, German, French DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Chinese DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Arabic DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Korean Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdckit-positest-hhd-c-high-voltage-holiday-detector-p-2107.html Thu, 21 Mar 2024 04:43:56 +0000 USD 2107 DeFelsko 998 HHDCKIT https://www.abqindustrial.net/store/images/defelsko-positest-hhd-c-high-voltage-holiday-detector.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-flooring-c-107_138_151/wagner-meters-floor-sentry-wood-floor-data-logger-p-2106.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2106 ]]>The Wagner Meters Floor Sentry® Wood Floor Data Logger embedded wood floor data logger is a card-sized device featuring temperature and relative humidity (RH) sensors to monitor and record the internal temperature and RH within your wood floor as well as the temperature and RH on the surface of the concrete subfloor or underlayment The Wagner Meters Floor Sentry® Wood Floor Data Logger is embedded wood floor data logger from Wagner Meters monitors and records the internal temperature and RH within your wood floor as well as the temperature and RH on the surface of the concrete subfloor or underlayment. Wagner Meters Floor Sentry® Wood Floor Data Logger connects, via Bluetooth®, to the free Wagner Sentry® smart device app for instant monitoring of floor or underlayment conditions, setting alarm threshold levels, viewing graphed progress, and more. An easy-to-install solution that turns your floor into a smart floor. It alerts you when temperature and relative humidity conditions might lead to moisture-related damage, giving you the tools to monitor your flooring and take action before it occurs. Turn Your Floor Into a Smart Floor With Floor Sentry installed, you can save expensive flooring from moisture-related damages, which can cause problems. Moisture issues can be very damaging to your wood flooring, and they're usually caused by changes in temperature and humidity that are difficult to detect until it's too late. Floor Sentry gives you peace of mind by alerting you when there's a problem, so you can take action before the damage occurs. In return for your hard work, money, and time, your new wood floor will provide many years of warmth and elegance. Severe damage and possible destruction due to moisture-related issues is the last thing you want to worry about. The Floor Sentry from Wagner Meters shields your investment by providing you with instant access to the temperature and relative humidity condition of your wood floor as well as your underlayment or concrete subfloor. An easy-to-install solution that turns your floor into a smart floor. It alerts you when temperature and relative humidity conditions might lead to moisture-related damage, giving you the tools to monitor your flooring and take action before it occurs. Downloads Wagner Meters Floor Sentry® Wood Floor Data Logger - Data Sheet Wagner Meters Floor Sentry® Wood Floor Data Logger - Instruction Manual Wagner Meters Floor Sentry® Wood Floor Data Logger - App Manual Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-flooring-c-107_138_151/wagner-meters-floor-sentry-wood-floor-data-logger-p-2106.html Wed, 14 Jun 2023 18:38:55 +0000 USD 2106 Wagner Meters 1000 FloorSentry https://www.abqindustrial.net/store/images/wagner-meters-floor-sentry-wood-floor-data-logger.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1123-compression-plate-self-leveling-p-2105.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2105 ]]>Self-aligning compression plate adjusts to the angle of the sample The Mark-10 G1123 Compression Plate, Self Leveling is self-aligning compression plate adjusts to the angle of the sample via four adjustable screws and nuts. Ideal for ensuring parallelism and complete sample engagement, particularly for low-deflection springs and other materials with high spring rates. Integrated eye end mount. Eye end adapters are available to adapt to Mark-10 load cells, force gauges, and test stands. Features Self-aligning compression plate ensures that load is applied in-line with the sample Integrated eye end mounting Specifications Capacity 2,000 lbf / 9 kN Weight 2.80 lb / 1.27 kg Material Steel 58 HRC, nickel-plated Angle ±1.5° | To adjust the angle, loosen the nuts, position the plate as desired, then tighten. Downloads Mark-10 G1123 Compression Plate, Self Leveling - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1123-compression-plate-self-leveling-p-2105.html Tue, 06 Jun 2023 17:11:32 +0000 USD 2105 Mark-10 1000 G1123 https://www.abqindustrial.net/store/images/mark-10-g1123-compression-plate-self-leveling.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1111-ribbon-wrap-grip-for-astm-d6775-compliance-p-2104.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2104 ]]>Ribbon Wrap Grip for textile webbing, tape and braided materials For compliance to ASTM D6775 when tensile testing Capacity: 2000 lbs The Mark-10 G1111 Ribbon Wrap Grip for ASTM D6775 Compliance is secures textile webbing, tape, and braided materials typically used in construction, shipping, and other industrial uses. The grip is ideal for conformance to ASTM D6775 and related standards, accommodating a wide range of sample widths and forces up to 2,000 lbF (10 kN). Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force sensors, and test stands. Kit Contents Fixture assembly Eye end anchor pin 2 Anchor pin for sample drum Features Secures webbing, tape, and braided materials for pull testing, as per ASTM D6775 Specifications Function Secures webbing, tape, and braided materials for pull testing, as per ASTM D6775 Capacity 2,000 lbF [10 kN] Unit Weight 5.2 lb [2.4 kg] Related Products Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Mark-10 Series 4 Advanced Digital Force Gauge 3,000 Hz peak sampling rate ±0.2% accuracy Mark-10 Series 5 Advanced Digital Force Gauge 7,000 Hz peak sampling rate ±0.1% accuracy Downloads Mark-10 G1111 Ribbon Wrap Grip for ASTM D6775 Compliance - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1111-ribbon-wrap-grip-for-astm-d6775-compliance-p-2104.html Tue, 06 Jun 2023 15:54:51 +0000 USD 2104 Mark-10 1000 G1111 https://www.abqindustrial.net/store/images/mark-10-g1111-ribbon-wrap-grip-for-astm-d6775-compliance.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1107-snap-hook-p-2103.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2103 ]]>Capacity 500 lbF [2,500 N]Capacity 500 lbF [2,500 N] The Mark-10 G1107 Snap Hook is features a snap clasp, for added safety in pull testing applications. Swiveling action ensures proper alignment. Kit Contents G1030 5/16-18M to #10-32F adapter 5/16-18 M/M stud with jam nuts #10-32 M/M stud with jam nuts Features Capacity: 500 lbf / 2500 N Thread Size: 5/16-18, supplied with 10-32 adapter Weight: 0.3 lb / 0.14 kg Downloads Mark-10 G1107 Snap Hook - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1107-snap-hook-p-2103.html Tue, 06 Jun 2023 15:31:09 +0000 USD 2103 Mark-10 999 G1107 https://www.abqindustrial.net/store/images/mark-10-g1107-snap-hook.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1106-self-centering-vise-grip-p-2102.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2102 ]]>For samples up to 2"/50mm Capacity 500 lbF (2,500 N) The Mark-10 G1106 Self-centering Vise Grip self-centering vise can be used in a wide range of testing applications. Wide opening range (2"/50mm) accommodates large and unique samples. Rugged design permits testing up to 500 lbF (2,500 N). Smooth removable jaws can be field-modified to improve sample gripping characteristics as required for pull testing applications. Use this grip with a choice of test stand and force gauge to create a complete testing system. Replaces Model G1070. Kit Contents Mark-10 G1106 Self-centering Vise Grip Vise assembly Test stand adapter plate 8 - #10-32 mounting screws Features Maximum tension force: 500 lbF (2,500 N) Removable jaws Self-centering design Ergonomic lever, smooth operation Weight: 3.00 lb [1.36 kg] Mounts directly to the following test stands: ESM303, ESM1500 (when ordered with optional AC1055 mounting plate) ES30, TSC1000, TSF. Also compatible with ES10/ES20 when ordered with optional AC1060 mounting plate Specifications Maximum Tension Force 500 lbF [2,500 N] Weight 3 lb [1.4 kg] Shipping weight 4 lb [1.8 kg] Related Products Mark-10 ESM303 High Performance Motorized Test Stand Distance Measurement, Break Detection, Load Holding and many other features Mark-10 G1074 Standard Vise Grip Stops / reverses motorized test stand at load set points Sends a set point signal to an external device Downloads Mark-10 G1106 Self-centering Vise Grip - Data Sheet Mark-10 G1106 Self-centering Vise Grip - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1106-self-centering-vise-grip-p-2102.html Tue, 06 Jun 2023 15:14:45 +0000 USD 2102 Mark-10 999 G1106 https://www.abqindustrial.net/store/images/mark-10-g1105-iso-9727-cork-pull-fixture.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1105-iso-9727-cork-pull-fixture-p-2101.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2101 ]]>Conforms to ISO 9727 Accommodates up to 1.5 L bottles 200 lbF (1 kN) capacity The Mark-10 G1105 ISO 9727 Cork Pull Fixture is fixture is designed to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO 9727. The Mark-10 G1105 ISO 9727 Cork Pull Fixture accommodates up to 1.5 L bottles, and is compatible with both natural and synthetic stoppers. To use, load the bottle onto the spring loaded tray. The neck is secured by the upper bracket. Delrin material is used for the surfaces in contact with the bottle, to avoid marring or breaking the sample. Thread the provided corskscrew assembly into the cork, then use the swiveling hook from the force gauge to engage the eye bolt at the end of the cork screw assembly. Recommended for use with a force gauge and ES30 manual test stand or ESM303 motorized test stand. A column extension is required to accommodate the height of the fixture. Kit Contents Mark-10 G1105 ISO 9727 Cork Pull Fixture Base fixture Corkscrew assembly G1035 large hook, 5/16-18 G1018-2 swivel adapter, 5/16-18 Test stand mounting hardware Features Extracts cork stoppers from bottles Adjusts to fit bottles up to 1.5 L Compatible with natural and synthetic stoppers Specifications Capacity 200 lbF (1000 N) Weight 9.5 lbs (4.3 kg) Related Products Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Mark-10 Series 5 Advanced Digital Force Gauge 7,000 Hz peak sampling rate ±0.1% accuracy Mark-10 Series 7 Professional Digital Force Gauge 14,000 Hz peak sampling rate ±0.1% accuracy Downloads Mark-10 G1105 ISO 9727 Cork Pull Fixture is fixture - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1105-iso-9727-cork-pull-fixture-p-2101.html Tue, 06 Jun 2023 13:53:10 +0000 USD 2101 Mark-10 1000 G1105 https://www.abqindustrial.net/store/images/mark-10-g1105-iso-9727-cork-pull-fixture.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1104-flip-cap-pull-grip-p-2100.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2100 ]]>Designed for flip cap pull testing Spring-loaded hook engages the sample, then automatically retracts. The Mark-10 G1104 Flip Cap Pull Grip is designed to engage the tab on a flip cap for pull-off force measurements. A spring-loaded hook retracts as it is lowered into the starting position, then snaps into place below the tab Features Designed for flip cap pull testing Spring-loaded hook engages the sample, then automatically retracts Specifications Capacity 20 lbF (100 N) Weight 0.10 lbs (0.04 kg) Includes #10-32 M/M stud with jam nuts Downloads Mark-10 G1104 Flip Cap Pull Grip - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1104-flip-cap-pull-grip-p-2100.html Mon, 05 Jun 2023 20:01:50 +0000 USD 2100 Mark-10 1000 G1104 https://www.abqindustrial.net/store/images/mark-10-g1104-flip-cap-pull-grip.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1103-wire-rope-grip-medium-p-2099.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2099 ]]>Pull testing of wire, rope, and yarn Max. sample size: ö 0.26 in (6.6 mm) 200 lbF (1 kN) capacity The Mark-10 G1103 Wire / Rope Grip, Medium is designed for wire, rope, and yarn pull testing applications. Secures the free end of the sample via a bollard and vise. Includes integrated eye end mounting, and requires an eye end adapter to mount to force gauges or force sensors, and test stands. Features Bollard / capstan design effectively secures wire, rope, and other samples Eye end mounting Specifications Capacity 200 lbF (1,000 N) Weight 0.6 lb (0.3 kg) Downloads Mark-10 G1103 Wire / Rope Grip, Medium - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1103-wire-rope-grip-medium-p-2099.html Tue, 06 Jun 2023 13:45:12 +0000 USD 2099 Mark-10 1000 G1103 https://www.abqindustrial.net/store/images/mark-10-g1103-wire-rope-grip-medium.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1102-wire-rope-grip-large-p-2094.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2094 ]]>Pull testing of wire, rope, and yarn Max. sample size: ⌀ 0.21 in (5.3 mm) 1,000 lbF (5 kN) capacity The Mark-10 G1102 Wire / Rope Grip, Large is designed for wire, rope, and yarn pull testing applications. Secures the free end of the sample via a bollard and vise. Includes integrated eye end mounting, and requires an eye end adapter to mount to force gauges or force sensors, and test stands. Features Bollard / capstan design effectively secures wire, rope, and other samples Eye end mounting Specifications Capacity 1,000 lbF (5,000 N) Weight 1.8 lb (0.8 kg) Downloads Mark-10 G1102 Wire / Rope Grip, Large - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1102-wire-rope-grip-large-p-2094.html Mon, 05 Jun 2023 17:41:00 +0000 USD 2094 Mark-10 1000 G1102 https://www.abqindustrial.net/store/images/mark-10-g1102-wire-rope-grip-large.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1101-parallel-jaw-vise-action-grip-medium-p-2093.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2093 ]]>General tensile testing Max. sample thickness: 1.27 in (32.3 mm) 200 lbF (1 kN) capacity The Mark-10 G1101 Parallel Jaw / Vise-Action Grip, Medium is grip is ideal for general tensile and pull testing applications up to 200 lbF (1,000 N). Pyramidal jaw faces and generous clearance effectively secure a wide range of sample materials and sizes. Extended jaw lengths are available, to accommodate larger samples. Includes integrated eye end mounting, and requires an eye end adapter to mount to force gauges or force sensors, and test stands. Features Individually adjustable, serrated jaws Available extended length jaws Specifications Capacity 200 lbF (1000 N) Housing Material Aluminum Jaw Material Hardened steel, 58 RC Weight 1 lb (0.5 kg) Related Products Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Downloads Mark-10 G1101 Parallel Jaw / Vise-Action Grip, Medium - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1101-parallel-jaw-vise-action-grip-medium-p-2093.html Mon, 05 Jun 2023 14:47:33 +0000 USD 2093 Mark-10 1000 G1101 https://www.abqindustrial.net/store/images/mark-10-g1101-parallel-jaw-vise-action-grip-medium.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1100-parallel-jaw-vise-action-grip-large-p-2092.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2092 ]]>General tensile testing Max. sample thickness: 1.34 in (34.0 mm) 2,000 lbF (9 kN) capacity The Mark-10 G1100 Parallel Jaw / Vise-Action Grip, Large is rugged grip is ideal for general tensile and pull testing applications up to 2,000 lbF (10 kN). Pyramidal jaw faces and generous clearance effectively secure a wide range of sample materials and sizes. Includes an adjustable stop for consistent sample placement between the jaws. Extended jaw lengths are available, to accommodate larger samples. Includes integrated eye end mounting, and requires an eye end adapter to mount to force gauges or force sensors, and test stands Features Individually adjustable, serrated jaws Available extended length jaws Specifications Capacity 2,000 lbF (9 kN) Housing Material Aluminum Jaw Material Hardened steel, 58 RC Weight 5.9 lb (2.7 kg) Related Products Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Downloads Mark-10 G1100 Parallel Jaw / Vise-Action Grip, Large - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1100-parallel-jaw-vise-action-grip-large-p-2092.html Sun, 04 Jun 2023 20:28:25 +0000 USD 2092 Mark-10 1000 G1100 https://www.abqindustrial.net/store/images/mark-10-g1100-parallel-jaw-vise-action-grip-large.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1099-puncture-fixture-for-force-gauges-p-2091.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2091 ]]>Test the puncture force of gypsum board and other materials Spring-loaded aluminum housing ensures safe usage The Mark-10 G1099 Puncture Fixture for Force Gauges is designed for puncturing gypsum board and other materials to determine puncture resistance. Compatible with all current Mark-10 force gauges. For added safety, the spring-loaded needle retracts when not actively pushed into a material. The Mark-10 G1099 Puncture Fixture for Force Gauges is used with Mark-10 Series 2 Economical Digital Force Gauge, Mark-10 Series 3 Digital Force Gauge, Mark-10 Series 4 Advanced Digital Force Gauge, Mark-10 Series 5 Advanced Digital Force Gauge, and Mark-10 Series 7 Professional Digital Force Gauge. Features Test the puncture force of gypsum board and other materials Spring-loaded aluminum housing ensures safe usage Compatible with all force gauges. Specifications Capacity 20 lbF [100 N] Weight 0.04 lbs (0.02) Shipping Weight 1 lb [0.5 kg] Related Products Mark-10 Series 2 Economical Digital Force Gauge Measures Push and Pull Force ±0.5% accuracy Mark-10 Series 3 Digital Force Gauge 2,000 Hz peak sampling rate ±0.3% accuracy Mark-10 Series 4 Advanced Digital Force Gauge 3,000 Hz peak sampling rate ±0.2% accuracy Mark-10 Series 5 Advanced Digital Force Gauge 7,000 Hz peak sampling rate ±0.1% accuracy Mark-10 Series 7 Professional Digital Force Gauge 14,000 Hz peak sampling rate ±0.1% accuracy Downloads Mark-10 G1099 Puncture Fixture for Force Gauges - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1099-puncture-fixture-for-force-gauges-p-2091.html Sun, 04 Jun 2023 17:04:17 +0000 USD 2091 Mark-10 1000 G1099 https://www.abqindustrial.net/store/images/mark-10-g1099-puncture-fixture-for-force-gauges.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1098-astm-d6195-loop-tack-fixture-p-2090.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2090 ]]>ASTM D6195 Loop Tack Fixture Quick-change mechanism for test strips Designed for loop tack force testing The Mark-10 G1098 ASTM D6195 Loop Tack Fixture is designed for tack force testing of pressure-sensitive adhesives, in conformance with ASTM D6195 and related standards. A looped sample is loaded onto the test strip, and the closed end of the loop is secured by an upper grip (not included - suggested model: G1008). The test strip may be indexed in three positions, allowing for three tests to be performed between cleaning cycles. The strip is secured and released by a lever-operated clamp. An additional set of three test strips is available. Features Designed for loop tack force testing Quick-change mechanism for test strips Conforms to ASTM D6195 Specifications Capacity 100 lbs / 500 N Weight 1.10 lbs / 0.5 N Test strip material T304 SS, per ASTM A666 Standard Accessories 1 Test strip and 5/16-18 M/M stud with jam nuts Related Products Mark-10 ESM303 High Performance Motorized Test Stand Distance Measurement, Break Detection, Load Holding and many other features Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Mount to common load cells, test frames, and force gauges Individual adapters and kits available Mark-10 ES30 Hand Wheel Test Stand 200lb Capacity 13" Maximum Travel Mark-10 Series 5 Advanced Digital Force Gauge 7,000 Hz peak sampling rate ±0.1% accuracy 1,000 point data memory and statistics Downloads Mark-10 G1098 ASTM D6195 Loop Tack Fixture - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1098-astm-d6195-loop-tack-fixture-p-2090.html Thu, 01 Jun 2023 18:17:59 +0000 USD 2090 Mark-10 1000 G1098 https://www.abqindustrial.net/store/images/mark-10-g1098-astm-d6195-loop-tack-fixture.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1095-g1096-g1097-3-point-and-4-point-bend-fixtures-p-2089.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2089 ]]>Bases feature movable blocks with multiple V-grooves to accept several roller diameters. 10 mm dia. rollers are included, and other sizes are available. 500 lbF and 2,0000 lbF capacities available. The Mark-10 G1095-G1096-G1097 3-point and 4-point Bend Fixtures is family of bend fixtures is designed for 3-point and 4-point bend testing of plastics, metals, ceramics, tubing, and many other materials. Two base sizes are available, along with an upper anvil, and optional support diameters. Use a base-anvil combination for 3-point bend testing or two bases for 4-point bend testing. The fixtures conform to ASTM C393, C1161, D790, and related standards. Bases feature movable blocks with multiple V-grooves to accept several support diameters. 10 mm dia. supports are included, and other sizes are available. The bases feature engraved rulers, dual-graduated with an inch scale on one side and mm scale on the other. Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10force gauges orforce sensors, andtest stands. The bases also include thru-holes and mounting screws for direct mounting to certain test stands. Features Designed for 3-point and 4-point bend testing Accommodate a broad sample size range Rugged design Dual graduated rulers - in and mm Recommended for use with a motorized test stand. May be used with eye end adapters or mounted to test stands with mounting screws (except anvil - eye end mounting only). Specifications Model G1095 G1096 G1097 Capacity lbF [kN] 500 [2.5] 2,000 [10] 2,000 [10] Weight* lb [kg] 3.0 [1.3] 7.1 [3.2] 0.5 [0.2] Shipping Weight lb [kg] 4.0 [1.8] 9.0 [4.1] 1 [0.5] Housing material 2024 Al 2024 Al 303 SS Block material 303 SS 303 SS - Support material 416 SS, hardened 416 SS, hardened 416 SS, hardened Includes Screws for test stand mounting, two 10 mm dia. supports and o-rings Screws for test stand mounting, two 10 mm dia. supports and o-rings 10 mm. dia. support and o-rings * including two blocks and 10 mm dia. rollers Related Products Mark-10 ESM303 High Performance Motorized Test Stand Distance Measurement, Break Detection, Load Holding and many other features Mark-10 Eye End Adapters Prevent Grip Rotation Quick grip installation and removal Mount to common load cells, test frames, and force gauges Individual adapters and kits available Downloads Mark-10 G1095-G1096-G1097 3-point and 4-point Bend Fixtures - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1095-g1096-g1097-3-point-and-4-point-bend-fixtures-p-2089.html Thu, 01 Jun 2023 17:35:21 +0000 USD 2089 Mark-10 997 G1095-G1096-G1097 https://www.abqindustrial.net/store/images/mark-10-g1095-g1096-g1097-3-point-and-4-point-bend-fixtures.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-ac1100-tabletop-stand-for-indicators-p-2088.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2088 ]]>Tabletop Stand For Indicators & TT03 The Mark-10 AC1100 Tabletop Stand For Indicators is a tabletop stand for any Mark-10 indicator or Series TT03 torque gauge (indicator portion). It features angle adjustment to optimize the viewing angle. Note: For indicator positioning only. It should not be used to support a force gauge or torque sensor in a load-bearing application. Specifications HS Code 9024800000 ECCN EAR99 Country of origin USA Related Products Series-7i Professional Force and Torque Indicator Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC Series-5i Advanced Force/Torque Indicator 1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs Series-3i Force and Torque Indicator Interchangeable force and torque sensors through Plug & Test™technology USB data output Mark-10 TT03 Digital Torque Gauges Programmable set points with pass/fail indicators USB data output Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-ac1100-tabletop-stand-for-indicators-p-2088.html Wed, 31 May 2023 21:26:43 +0000 USD 2088 Mark-10 1000 AC1100 https://www.abqindustrial.net/store/images/mark-10-ac1100-tabletop-stand-for-indicators.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/imada-sw-1sv-usb-data-acquisition-software-for-torque-p-2087.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2087 ]]>Data Acquisition Software for Torque Full SPC and graphing capabilities The Imada SW-1SV-USB Data Acquisition Software for Torque is a highly customized Excel spreadsheet specifically designed for capturing and analyzing peak and first peak data from torque testers with either RS-232 or USB ports. The Imada SW-1SV-USB Data Acquisition Software for Torque captures peak torque or first peak readings and provides a running log of all torque measurements along with a chart of the data as well as statistical information including Min, Max, Mean, Median, Standard Deviation, Average Deviation and Variance. If desired, the entire stack can be saved to disk, analyzed or cleared. Because all data is entered directly into a standard Excel spreadsheet, you are virtually unlimited in your ability to analyze your torque tester data using all of the powerful tools available in Excel. Features Full SPC and graphing capabilities Automates your data collection Related Products Imada Cedar DID Digital Torque Screwdriver 35 lbf-in & 4.5 lbf-in Capacities Units of measure: lb-in, oz-in, kg-cm, N-cm and N-m Cedar DIW Lightweight Digital Torque Tester / Wrench 1/4", 3/8" or 1/2" Drive Capacity: up to 87 ft-lbs Wrench head swivels 300° Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/imada-sw-1sv-usb-data-acquisition-software-for-torque-p-2087.html Wed, 31 May 2023 20:45:55 +0000 USD 2087 Imada 1000 SW-1SV-USB https://www.abqindustrial.net/store/images/imada-sw-1sv-usb-data-acquisition-software-for-torque.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/mark-10-mesurgauge-mesurgauge-plus-load-p-2086.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2086 ]]>Mesurgauge Force Load & Travel Analysis Software Real time tabular and graphical data displaying load vs. time or load vs. travel The Mark-10 MESURgauge - MESURgauge Plus Load - Travel Analysis Software is Plus expand the functionality of force and torque measuring instruments and test stands. Both programs share the ability to capture and display data in graphical format for load vs. time or load vs. travel vs. time. MESUR™gauge Plus adds the ability to control the motion of Mark-10 motorized test stands, coordinating motion control and data acquisition. The programs include a set of tools to analyze test results, including statistical calculations, quick data export to Microsoft Excel, customizable reports, pass/fail indicators, and many others. Test setups are customizable and can be saved and recalled. The user can program test start and stop conditions, including load, time, distance, and sample break. Additional features include a large display screen for real time load and travel data and a utility to configure certain Mark-10 gauges from a PC. Built-in simulated data generation allows MESUR™gauge or MESUR™gauge Plus to be evaluated without an instrument. The software may be downloaded from the links below. The software is free for 90 days from date of installation, and may be activated at any time in the field. Features Acquire continuous or single-point data from force and torque measuring instruments and test stands Real time tabular and graphical data acquisition of load vs. time or load vs. travel vs. time Configurable start and stop test triggers (time, load, number of samples, or travel) Statistical calculations (minimum, maximum, average, area under curve) for a user-selectable data range One-button export to Excel Graph manipulation tools, including zooming, rescaling, panning, titles, and more Create customizable reports and report templates Compatible with all Mark-10, Imada, Shimpo and all other force and torque measuring instruments Save and recall test setups and test data View real time test data through an enlarged instrument display Measures Area Under the Curve Related Products Mark-10 Series 2 Economical Digital Force Gauge Measures Push and Pull Force ±0.5% accuracy Mark-10 Series 3 Digital Force Gauge 2,000 Hz peak sampling rate ±0.3% accuracy Mark-10 Series 4 Advanced Digital Force Gauge 3,000 Hz peak sampling rate ±0.2% accuracy Mark-10 Series 5 Advanced Digital Force Gauge 7,000 Hz peak sampling rate ±0.1% accuracy Mark-10 Series 7 Professional Digital Force Gauge 14,000 Hz peak sampling rate ±0.1% accuracy Mark-10 Series 3I Force and Torque Indicator 2,000 Hz sampling rate ±0.2% accuracy Mark-10 Series 5I Advanced Force / Torque Indicator 7,000 Hz sampling rate ±0.1% accuracy Mark-10 Series 7I Professional Force / Torque Indicator 14,000 Hz sampling rate ±0.1% of full scale + sensor Downloads MESURgauge - MESURgauge Plus Load - Travel Analysis Software - Data Sheet MESURgauge - MESURgauge Plus Load - Travel Analysis Software - Instruction Manual MESURgauge - MESURgauge Plus Load - Travel Analysis Software - Quick Guide MESURgauge - MESURgauge Plus Load - Travel Analysis Software - Report Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/mark-10-mesurgauge-mesurgauge-plus-load-p-2086.html Wed, 31 May 2023 20:06:16 +0000 USD 2086 Mark-10 1000 MESURgauge https://www.abqindustrial.net/store/images/mesurgauge-mesurgauge-plus-load-travel-analysis-software.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/f-000-7000-v-block-probe-holder-p-2085.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2085 ]]>The F-000-7000 V-Block Probe HolderPencil Probe transducer holder provides enhanced control when measuring small circular items and other curved surfaces. It can also be used on flat surfaces for better repeatability and quick perpendicular placing of the probe to achieve quick and easy repeatable measuring results The F-000-7000 V-Block Probe Holder Pencil Probe spring-loaded pencil probe transducer holder provides enhanced control when measuring small-diameter tubes and other curved surfaces. It can also be used on flat surfaces for better repeatability and quick perpendicular placing of the probe to achieve quick and easy repeatable measuring results. Related Products Dakota Ultrasonics PVXPrecision Ultrasonic Resolution: 0.0001" (0.001 mm) Datalogging: YES Checkline TI-PVXPrecision Ultrasonic A-scan Thickness Gauge High Precision gauge ideal for applications with minimum access orcontact areas. Enhanced graphic scope Displays A Scan & B Scan fora cross section view Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/f-000-7000-v-block-probe-holder-p-2085.html Wed, 31 May 2023 14:57:10 +0000 USD 2085 Checkline 1000 F-000-7000 https://www.abqindustrial.net/store/images/f-000-7000-v-block-probe-holder-for-ti-pvx-pencil-probe.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/dillon-x-pp-tension-and-compression-force-gauge-p-2084.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2084 ]]>Tension and compression Force Gauge Available in capacities from 50 lb up to and including 2,500-0-2,500 lb or from 50 to 1,000 kg Accuracy is ±2% of maximum dial reading The Dillon X-PP Tension and compression Force Gauge is push-pull are available in four capacities in pounds ranging from 50 lb up to and including 2,500-0-2,500 lb and three metric capacities from 50 to 1,000 kg. Accuracy is ±2% of maximum dial reading (based upon total capacity of both compression and tension scales). Model Dillon X-PP Tension and compression Force Gauge isin capacities up to and including 500 lb or 250 kg are supplied with a set of self-aligning spherical rod-end connectors for tension loading. Force is applied to connectors through a hardened steel pin which must be slip fit in connector holes. 2,500 lb and 1,000 kg capacity gauges are equipped with two shackle adapters, shackles and pins. Shackles must be removed when compression load is involved. Force is then applied against shackle pins in a suitable test setup. All push-pull gauges are supplied with a compression-loading spherical ball fitting for compression loading. NIST Traceable Calibration Certificate is included. 24-month Limited Manufacturer's Warranty Made in the USA Specifications Warranty 2 Years Accuracy ±2% Operating Temperature up to 120°F (48°C) Overload rating Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor. Force Ranges Model Capacity Resolution 30795-0014 50 - 0 - 50 lb 1 lb 30796-0013 125 - 0 - 125 lb 2.5 lb 30798-0011 500 - 0 - 500 lb 10 lb 30800-0017 2,500 - 0 - 2,500 lb 50 lb 30796-0021 50 - 0 - 50 kg 1 kg 30798-0029 250 - 0 - 250 kg 5 kg 30800-0025 1,000 - 0 - 1,000 kg 20 kg Low Beam Deflection Capacity Deflection 50 - 250 lb (25 - 100 kg) 0.019" 500 lb (200 kg) 0.016" 1,000 lb (500 kg) 0.018" 2,000 lb (1,000 kg) 0.011" 5 and 10,000 lb (2 and 5,000 kg) 0.010" 25,000 b (10,000 kg) 0.022" When measured across the center of top- and bottom-loading holes Principle of Operation A D-shaped deflection beam is the heart of the Dillon Force Gauge. Machined to close tolerances, beams are heat treated to develop optimum strength and spring characteristics. High-strength aluminum is used in Model X instruments through 500 lb (200 kg). Ranges above this are fabricated from aircraft-quality alloy steel. A precision dial indicator is mounted at the null point of the deflection beam. The indicator plunger rests against a slanted anvil at the open end of the beam, as shown in the photo. Under compression loads, the two halves of the beam tend to close. Tension force causes them to move apart. This action pushes the plunger inward, as determined by the slant of the anvil. Readings produced on the dial are in direct relation to applied load. The pointer revolves 360° clockwise under compression or tension forces. Push-pull gauges read half scale (180°) clockwise in compression, and counterclockwise, 180° from center zero under tension loads. Options Shockless dial indicator for installations involving the sudden application or release of force. (Maximum pointer cannot be supplied with shockless dial indicator) Maximum load pointer which remains at peak load until manually reset Zero position on dial may be factory positioned at 12, 3, 6, or 9 o'clock. Standard position is at 12 o'clock Downloads Dillon X-PP Tension and compression Force Gauge - Data Sheet Dillon X-PP Tension and compression Force Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/dillon-x-pp-tension-and-compression-force-gauge-p-2084.html Wed, 01 May 2024 02:36:25 +0000 USD 2084 Dillon 999 X-PP https://www.abqindustrial.net/store/images/dillon-x-pp-tension-compression-force-gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-uw-underwater-coating-thickness-gauge-for-positector-6000-and-positector-utg-p-2083.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2083 ]]>Coating Thickness Gauge with extended waterproof probes for under water measurement The DeFelsko UW Underwater Coating Thickness Gauge for DeFelsko PosiTector 6000 and DeFelsko PosiTector UTG is a extended waterproof probes for under water measurement DeFelsko PosiTector 6000 All DeFelsko PosiTector 6000 regular separate probes are suitable for underwater measurement and are available with extended cable lengths up to 250 feet / 75 meters. Ideal for measuring coating thickness on underwater pipes, ships, bulkheads, offshore oil rigs or anywhere extended reach is required. Maximum cable lengths vary depending on probe type... F (ferrous) (FS, FRS, FTS) - up to 250 ft (75 m) N (non-ferrous) (NS, NAS, NRS) - up to 50 ft (15 m) FN (ferrous/non-ferrous) (FNS, FNRS, FNDS) - up to 50 ft (15 m) Extended cable lengths are also available for ferrous microprobes (F0S, F45S, F90S) and FKS probes (thick coatings) - up to 50 ft (15 m). Note: Microprobes and FKS probes do not support underwater usage. DeFelsko PosiTector UTG DeFelsko PosiTector UTG C and DeFelsko PosiTector UTG M probes are suitable for underwater measurement and are available with extended cable lengths up to 60 feet / 20 meters. Ideal for measuring the remaining wall thickness on underwater pipes, ships, bulkheads, offshore oil rigs or anywhere extended reach is required. Features Two year warranty on gage body AND probe Made in the USA Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Related Products DeFelsko PosiTector 6000 Coating Thickness Gages for ALL Metal Substrates DeFelsko PosiTector UTG Measure the wall thickness of materials such as steel, plastic, and more using ultrasonic technology.  Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-uw-underwater-coating-thickness-gauge-for-positector-6000-and-positector-utg-p-2083.html Fri, 05 Jan 2024 23:40:40 +0000 USD 2083 DeFelsko 1000 DeFelsko-UW https://www.abqindustrial.net/store/images/defelsko-uw-underwater-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-quintsonic-t-multi-layer-ultrasonic-coating-thickness-gauge-with-tablet-display-p-2082.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2082 ]]>For non-destructive coating thickness measurements of up to 8 layers of paint, varnish, plastics, and other coatings applied on plastic, composites, metal, and other materials. Total thickness, as well as individual layer thickness, can be measured in one simple process The ElektroPhysik QuintSonic-T Multi-layer Ultrasonic Coating Thickness Gauge with Tablet Display is a Multi-Layer Ultrasonic Coating Thickness Gauge, specially designed for non-destructive coating thickness measurements of up to 8 layers of paint, primer, and other coatings applied on plastic, composites, metal, and other materials. Total thickness, as well as individual layer thickness, can be measured in one simple process. Featuring a large 8-inch display, the QuintSonic T offers a user-friendly overview of the measurement as well as the corresponding view of the ultrasonic signal (A-scan). Parameters for signal adjustment are displayed simultaneously and can be adjusted for the current measurement quickly and easily. Comprehensive data management of measuring values allows for data output in text and Excel format as well as creation of complete measurement reports in pdf format. The integration of descriptive texts and photos supports the documentation of measurement data. Additionally, the software allows for the storage of individual A-scans for subsequent adjustment of clipping domains or blocked domains. The ElektroPhysik QuintSonic-T Multi-layer Ultrasonic Coating Thickness Gauge with Tablet Display is ideal for harsh environments thanks to an IP 67 & MIL-STD 810 G rating and extremely strong Gorilla® glass. Kit Contents QuintSonic Coating Thickness gauge Industrial Tablet Display Tablet Stand Probe with 1m / 39" cable Operating manual German / English 1 bottle distilled water 1 bottle coupling gel Carrying Case Features Non-destructive coating thickness measurements Up to 7.5mm / .29 Inches depending on material Large and Rugged Tablet Display Included Measurement of the total thickness as well as the individual layer thickness of a multi-layer system in only one operation Storage for measurements, statistics, and material calibrations Specifications Measuring range / Resolution / Accuracy Layer 1 Measuring range 356 µm Resolution 0,25 µm Accuracy 0,25 µm Measuring range / Resolution / Accuracy Layer 2 Measuring range 890 µm Resolution 0,5 µm Accuracy 0,5 µm Measuring range / Resolution / Accuracy Layer 3 Measuring range 1.900 µm Resolution 1 µm Accuracy 1 µm Measuring range / Resolution / Accuracy Layer 4 Measuring range 3.900 µm Resolution 2 µm Accuracy 2 µm Measuring range / Resolution / Accuracy Layer 5 Measuring range 7.500 µm Resolution 4 µm Accuracy 4 µm (at 2375 m/s ultrasonic velocity in all layers) Data ports IrDA 1.0, USB and RS232 via adapter cable (available as an option) Power supply 4 x AA batteries, Optional AC Adapter Display 160 x 160 pixel LCD, backlit Dimensions 153 mm x 89 mm x 32 mm (basic unit); dia. 25 mm x length 60 mm (sensor) Min Layer Thickness Approx. 10 µm / 0.3 mils (depending on the ultrasonic velocity in the layer) Min Measuring Area 5 mm Ø / 0.2" Ø Measurement Time approx. 1 s Statistical functions (per batch): n, min, max, mean value, standard deviation, coefficient of variation, block statistics (normconforming / user adjustable), histogram, trend diagram Minimum curvature radius convex: 50 mm / 2" concave: NA Measuring units μm, mm, mils, inch Operating Temperature +5...50°C Storage Temperature -10...+50°C Data ports IrDA 1.0, USB and RS232 via adapter cable (available as an option) Power supply 4 x AA batteries, Optional AC Adapter Display 160 x 160 pixel LCD, backlit Dimensions 153 mm x 89 mm x 32 mm (basic unit); dia. 25 mm x length 60 mm (sensor) Weight 310 g (basic unit incl. batteries), 80g (sensor) Interface Bluetooth, WiFi ,SD-card Related Products ElektroPhysik QuintSonic-7Ultrasonic Coating Thickness Gauge Non-destructive measurement of all types of coatings on various materials DeFelsko PosiTector 200 Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickness over wood, concrete, plastic and more. Advanced models measure up to 3 layers with graphics Downloads ElektroPhysik QuintSonic-T Multi-layer Ultrasonic Coating Thickness Gauge with Tablet Display - Data Sheet ElektroPhysik QuintSonic-T Multi-layer Ultrasonic Coating Thickness Gauge with Tablet Display - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-quintsonic-t-multi-layer-ultrasonic-coating-thickness-gauge-with-tablet-display-p-2082.html Sat, 17 Jun 2023 17:01:06 +0000 USD 2082 ElektroPhysik 1000 QuintSonic-T https://www.abqindustrial.net/store/images/elektrophysik-quintsonic-t-multi-layer-ultrasonic-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-jz-100-dial-thickness-gauge-with-100mm-jaw-depth-p-2081.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2081 ]]>Operated by lifting device - self closing Dial Resolution 0.01 mm The J-100 (metric) and JZ-100 (imperial) thickness gauges are designed for measuring the thickness of leather, textile, cardboard, felt, rubber, sheet metal, foils, plywood, plastic parts of all kind, etc. The aluminum housing is lightweight and rugged. It can be easily zeroed by turning the outer knurled ring of the scale. Features Operated by lifting device - self closing Dial Resolution 0.01 mm Select 1 of 5 different feelers based on your application. 1-Year Warranty Specifications Resolution 0.01 mm Measuring range 10 mm Depth of jaw 100 mm Scale diameter 58 mm Measuring pressure 1.0 N Feeler shape A, B, C, D, or E (1 per gauge) Measurement by spring load Operation by lifting device - self closing Weight, net 450 g Feeler Shape To order, please indicate the desired feeler, e.g. J-100-B for gauge with feeler B. This means that NOT all feelers are included in the package! Feeler: A For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: B For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: C For soft leather, cardboard, paper, foils, etc. Feeler: D For hard leather, plywood, fiberboard, etc. Feeler: E For sheet metal, etc. Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-jz-100-dial-thickness-gauge-with-100mm-jaw-depth-p-2081.html Thu, 04 Jul 2024 20:18:58 +0000 USD 2081 Hans-Schmidt 1000 JZ-100 https://www.abqindustrial.net/store/images/hans-schmidt-j-100-jz-100-dial-thickness-gauge-with-100mm-jaw-depth.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-series-j-analog-thickness-gauges-hand-held-p-2080.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2080 ]]>Measuring range: 0 - 10 mm Resolution: 0.01 mm Measuring range: 0 - 10 mm Resolution: 0.01 mm Thickness gauge to determine the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, foam and more Features J Series Thickness Gauge feature easy to read analog display along with the high accuracy J Series models are available with 5 different feelers. See selection of feelers below. Measuring by specified spring force of 1.2 N (optional 0.6 N or 2 N) Opening by lifting device (lever) – self closing thickness gauge Specifications Resolution 0.01 mm Measuring range 10 mm Jaw Depth 18 mm thru 400 mm Bezel diameter 54 mm Measuring pressure 1.2 N (optional 0.6 N or 2 N) ± 10 % Feeler shape A/B/C/D/E Measuring principle Self closing Weight, net (gross) 450 g (500 g) Available Models Model Measuring Range Resolution Jaw Depth Standard Contact Point J-15 10 mm 0.01 mm 18 mm 6.35 mm flat J-45 10 mm 0.01 mm 45 mm 6.35 mm flat J-50 10 mm 0.01 mm 50 mm C JA-50 10 mm 0.01 mm 50 mm C J-100 10 mm 0.01 mm 100 mm C J-200 10 mm 0.01 mm 200 mm C J-300 10 mm 0.01 mm 300 mm C J-400 10 mm 0.01 mm 400 mm J-200-30 30 mm 0.01 mm 200 mm C J-300-30 30 mm 0.01 mm 300 mm J-400-30 30 mm 0.01 mm 400 mm   Feeler Shape To order, please indicate the desired feeler, e.g. K-200-B for gauge with feeler B. This means that NOT all feelers are included in the package! Feeler: A For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: B For rubber, felt*, soft materials*, non wovens*, etc. *Meets no DIN EN ISO standard Feeler: C For soft leather, cardboard, paper, foils, etc. Feeler: D For hard leather, plywood, fiberboard, etc. Feeler: E For sheet metal, etc. Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/hans-schmidt-series-j-analog-thickness-gauges-hand-held-p-2080.html Wed, 03 Jan 2024 21:41:41 +0000 USD 2080 Hans-Schmidt 1000 Series J https://www.abqindustrial.net/store/images/hans-schmidt-series-j-analog-thickness-gauges-hand-held.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/checkline-tmg-universal-benchtop-material-thickness-gauge-astm-din-en-iso-standards-p-2079.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2079 ]]>Universal Benchtop Material Thickness Gauge Various configurations to measure according to ASTM, DIN, EN & ISO Standards The TMG series of digital material thickness gauges are designed for precision measurement according to ASTM, DIN, EN & ISO norms. The TMG universal thickness gauges have a simple design and are easy to operate. Simply press the plunger to raise the contact foot and place sample below (lift lever on TMG-3). When you release the plunger the foot will contact the sample with the correct pressure per the respective measuring standard. Thanks to its modular system, you can adapt the three basic types TMG-1, TMG-2 and TMG-3 to a large number of ASTM, DIN, EN and ISO standards without having to buy several measuring devices. We have standard setups for the most common materials such as elastomers, textiles, leather, nonwovens, films, films, rubber, fabrics, geomaterials, paper, paper towels, and cardboard. We can also offer customized solutions (inquire). Only the highest-quality materials are used in the manufacturing of the TMG thickness gauge as demonstrated by the laboratory grade granite base, stainless steel column and the highest quality aluminum boom. High-quality materials do not only guarantee longevity, but also high corrosion resistance even when used in high-humidity environments. List of standards for ready-made configurations: ISO-5084 for textiles ASTM D 1777 Option 2 for textiles ISO-23529 for rubber / elastomers ASTM D3767 for rubber / elastomers DIN EN ISO 12625-3 for waterproofing membranes ASTM D 1777 Option 1 for fiber fabrics, knitwear, knitwear and structural textiles ASTM D 1777 Option 5 for ceilings and pile fabrics ISO 4593 + DIN 53370 for films and films DIN EN ISO 2589 for leather ASTM D 1777 Option 3 for Films and Glass Fibers ASTM D 5199 for geosynthetics DIN EN 534 for paper and cardboard DIN EN ISO 3034 for corrugated board Features Includes Manufactures Calibration Certificate (ISO Calibration Cert Optional) Precision Granite Base RS-232C and USB Output User Selectable Units (In or MM) Specifications Measuring range TMG-1 + TMG-3: 12.5mm TMG-2: 0.8 / 1.8mm (depending on the resolution) Resolution TMG-1 + TMG-3: 0.001mm TMG-2: Switchable resolution: 0.005mm, 0.001mm and 0.0002mm (depending on measurement path) Measuring table ∅200 mm x 40 mm made of granite Column guide 30 mm made of stainless steel Weight TMG-1 + TMG-2: ca. 7kg TMG-3: ca. 8kg Calibration Certification The TMG does not include a calibration certificate standard however we do offer 3 options: A manufacturer calibration certificate for the complete system A DAkkS traceable calibration certificate, which refers purely to the dial gauge An ISO-17025 Accredited calibration certificate, which refers purely to the dial gauge Configurations Model Norm Application Foot Diameter Pressure (kPa) TMG-1-T ISO-5084 Textiles 50.5 1.0 TMG-1-G ISO-23529 + ASTM D 3767 Rubber 4.0 22 TMG-1-G1 ASTM D 3767 Rubber / Elastomers 16 10 TMG-1-PT ISO 12625-3 Paper towels 35.7 2.0 TMG-1-AB ISO 1849-2 Flexible sheets 10 20 TMG-2-F ISO 4593 + DIN 53370 Slides and films R40 X Related Products MTG Material Thickness Gauge for Textiles, Non-wovens, Fabrics & Soft Materials Conveniently performs thickness measurement on rubber, fabrics, foams, tapes/films and a wide assortment of other soft materials J-40 Digital Thickness Gauge Measures material thickness of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. Downloads TMG Universal Benchtop Material Thickness Gauge - ASTM / DIN / EN / ISO Standards - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/checkline-tmg-universal-benchtop-material-thickness-gauge-astm-din-en-iso-standards-p-2079.html Wed, 03 Jan 2024 22:16:40 +0000 USD 2079 Checkline 1000 TMG https://www.abqindustrial.net/store/images/tmg-universal-benchtop-material-thickness-gauge.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-30-digital-hay-plus-moisture-meter-p-2078.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2078 ]]>Large, custom display with auto backlight – easy to ready under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Alarm set point - alerts to user-selected MC level The Delmhorst FX-30 Digital Hay Plus Moisture Meter is the latest in the new Navigator family of moisturemeters from Delmhorst.   Uniquelydesigned for use in the field with a dashboard-like display that is easy toread under most conditions, and large, easy to use navigation buttons. The Delmhorst FX-30 multi-purpose meter features theDelmhorst EDGE™ app with customizable settings anduser-selectable calibrations for Hay, Hops, Hemp, Brazil Nuts, Tobacco andDates.  Having a reliable, accuratetool to monitor moisture through each phase of the process enhances qualitycontrol and increases profits. Kit Contents Delmhorst FX-30 Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco, Individual Instrument Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument Power Supply Instructions Delmhorst FX-30/1235 Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco with 1235 10" Prod Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument Delmhorst 1235 10" prod w/connector Power Supply Instructions Delmhorst FX-30/1235/18Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco with 1235 18" Prod Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument Delmhorst 1235 18" prod w/connector Power Supply Instructions Delmhorst FX-30/P01 Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco with 324CAS-0112 Case, H-4 Handle, 830-2 10" Prod, 831 Short Pin Prod Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument H-4 handle 830-2 10" prod 831 shortpin prod Power Supply Instructions Carrying Case Delmhorst FX-30/P02 Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco with 324CAS-0112 Case, H-4 Handle, 830-3 18" Prod, 831 Short Pin Prod Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument H-4 handle 830-2 18" prod 831 shortpin prod Power Supply Instructions Carrying Case Delmhorst FX-30/P03 Digital Hay Plus Moisture Meter - Hay / Hemp / Hops / Tobacco with 324CAS-0112 Case, H-4 Handle, 831 Short Pin Prod Delmhorst FX-30 Digital Hay Plus Moisture Meter, Individual Instrument H-4 handle 831 shortpin prod Power Supply Instructions Carrying Case Features Large, custom display with auto backlight – easy to ready under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Moisture Range: Hay - 6%-40% Moisture Range: Hops - 8%-23% Moisture Range: Hemp – 7%-34% Moisture Range: Tobacco – 8%-37% Moisture Range: Brazil Nuts – 6%-25% Moisture Range: Dates – 6%-25% Bluetooth® connectivity Color-coded LED’s – adjustable through EDGE™ app Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m Compatible with existing Delmhorst prods and electrodes The Delmhorst EDGE™ app offers: Timestamp and geotag Data export to .csv format Save unlimited readings Customized LED ranges Multi-language Specifications Power 2x AA batteries QR code on meter for easy access to support materials and meter registration Size meter only - 8.65in x 2.85in x 1.55in (2.2mm x 72mm x 39mm) Weight meter only - 0.4.5oz (1.3g) Optional hard plastic carrying case 2-year limited warranty on manufacturer’s defects. Bonus 3-months extended warranty with on-line registration Accessories 1985 The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively. 1986/EXTENSION Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls. 315ACC-0003 This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab. 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. MCS-4 This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. 1986 Bale Sensor For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000. Also available as 1986/40 with 40’ cable for larger balers. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod. 830-3 – 18” prod. 830-4 – 36” prod. 830-5 – 12” for hops. 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing. 2110 Split bale chamber sensor for use with Freeman balers Downloads Delmhorst FX-20 Digital Moisture Meter For Hay - Data Sheet Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-30-digital-hay-plus-moisture-meter-p-2078.html Sat, 11 May 2024 09:01:46 +0000 USD 2078 Delmhorst 989 FX-30 https://www.abqindustrial.net/store/images/delmhorst-fx-30-digital-hay-plus-moisture-meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-20-digital-moisture-meter-for-hay-p-2077.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2077 ]]>Large, custom display with auto backlight – easy to ready under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Alarm set point - alerts to user-selected MC level The Delmhorst FX-20 Digital Moisture Meter for Hay is the latest in the new Navigator family of moisturemeters from Delmhorst.   Uniquelydesigned for use in the field with a dashboard-like display that is easy toread under most conditions, and large, easy to use navigation buttons. TheDelmhorstFX-20 Hay meter is perfect for large andsmall volume producers to ensure reliable %MC readings in the windrow or in allsize bale packages.  Accurate moisturemonitoring is essential to reduce mold development, preserve leaves, color andfeed value.  The FX-20 can be used withvarious existing Delmhorst hay prods and accessories. Kit Contents Delmhorst FX-20 Digital Moisture Meter for Hay, Individual Instrument Delmhorst FX-20 Digital Hay Moisture Meter Power Supply Instructions Delmhorst FX-20/1235 Digital Moisture Meter For Hay with 1235 10" Prod Delmhorst FX-20 Digital Hay Moisture Meter Delmhorst 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter Power Supply Instructions Delmhorst FX-20/1235/18Digital Moisture Meter For Hay with 1235 18" Prod Delmhorst FX-20 Digital Hay Moisture Meter Delmhorst 1235 18” prod used for testing standard bales. Attaches directly to the connector on top of the meter Power Supply Instructions Delmhorst FX-20/P01 Digital Moisture Meter For Hay with 324CAS-0112 Case, H-4 Handle, 830-2 10" Prod, 831 Short Pin Prod Delmhorst FX-20 Digital Hay Moisture Meter H -4 handle 830-2 10" prod 831 shortpin prod Carrying Case Power Supply Instructions Delmhorst FX-20/P02 Digital Moisture Meter For Hay with 324CAS-0112 Case, H-4 Handle, 830-3 18" Prod, 831 Short Pin Prod Delmhorst FX-20 Digital Hay Moisture Meter H -4 handle 830-2 18" prod 831 shortpin prod Carrying Case Power Supply Instructions Delmhorst FX-20/P03 Digital Moisture Meter For Hay with 324CAS-0112 Case, H-4 Handle, 831 Short Pin Prod Delmhorst FX-20 Digital Hay Moisture Meter H -4 handle 831 shortpin prod Power Supply Instructions Carrying Case Features Large, custom display with auto backlight – easy to ready under all conditions On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Moisture Range: Hay 6%-40% Alarm set point - alerts to user-selected MC level Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m Compatible with existing Delmhorst prods and electrodes Specifications Power 2x AA batteries QR code on meter for easy access to support materials and meter registration Size meter only - 8.65in x 2.85in x 1.55in (2.2mm x 72mm x 39mm) Weight meter only - 0.4.5oz (1.3g) Optional hard plastic carrying case 2-year limited warranty on manufacturer’s defects. Bonus 3-months extended warranty with on-line registration Accessories 1985 The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively. 1986/EXTENSION Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls. 315ACC-0003 This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab. 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. MCS-4 This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. 1986 Bale Sensor For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000. Also available as 1986/40 with 40’ cable for larger balers. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod. 830-3 – 18” prod. 830-4 – 36” prod. 830-5 – 12” for hops. 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing. 2110 Split bale chamber sensor for use with Freeman balers Downloads Delmhorst FX-20 Digital Moisture Meter For Hay - Data Sheet Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-20-digital-moisture-meter-for-hay-p-2077.html Sat, 11 May 2024 08:59:47 +0000 USD 2077 Delmhorst 958 FX-20 https://www.abqindustrial.net/store/images/delmhorst-fx-20-digital-hay-moisture-meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/straightpoint-bolt-fixed-mount-cable-tension-meter-p-2076.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2076 ]]>Fixed-Mount Cable Tension Meter Capacity 20,000lb / 10,000kg Measures cables and up to 1.25” or 32mm diameter The Straightpoint BOLT Fixed-Mount Cable Tension Meter, is a lightweight wire rope tension meter or shunt tension meter for fast and accurate measurement of tensions up to 20,000lb or 10,000kg and up to 1.25” or 32mm diameter. Manufactured, using an integral, high accuracy, wireless module the BOLT can also be paired with and transmit load data to a Crosby SP Handheld plus (SW-HHP), which will enable you to read up to four load cells simultaneously. Connected to INSIGHT software, up to 126 BOLTs can be connected simultaneously enabling live readings of up to 700m or 2300ft. View and log load data from connected BOLT tension meters plus totals loads live on screen and directly into a .csv file for later analysis at speeds of up to 200Hz. Coming soon - In combination with a Crosby SP LoadConnect base station, loads can be monitored remotely. The base station transmits data to a cloud software solution, LoadConnect. This software solution has a dashboard that facilitates a user to see live loads, monitor errors, access historical readings, and view analytics and asset management. This will provide reduced site visits, improve decision making and safely monitor line tensions from any distance from anywhere in the world. Mount it permanently or semi-permanently on a wire rope, guy wire or cable, or multiple legs of a cable support structure such as those used on cell towers, bridges, flare stacks, antennas and masts. Or in "critical" architectural wire rope installations as well as zip lines. Constructed from aerospace-grade aluminum the BOLT digital tension meter is lightweight and easy to handle and operates on wires that are already under tension. Once installed it enables the operator to quickly check tension on cables or wire ropes set at any angle. Supplied in a purpose-made robust packaging, and inclusive of an SW-D dongle, to make on-the-spot calibrations to achieve greater accuracy of 2-3%; standard factory accuracy is 3-5%. Kit Contents Straightpoint BOLT Fixed-Mount Cable Tension Meter Calibration & proof test certificate Multi-lingual user manual RFID Tagged 2-year warranty Design validated by F.E.A. Features Proprietary 2.4 GHz Wireless Leading Wireless Range of 1000m/3280ft when connected to SW-HHP Unrivalled Battery Life of 1200hrs Internal Antennae Remote On-Off from handheld display or software Leave mounted in a permanent position on a wire rope or cable Applications Guy wire maintenance and monitoring on cell towers, bridges, flare stacks, antennas and masts. Guy wire Tower Plumb and Tension EHS guy wire, Turnbuckle tensioner. Architectural wire rope installations Median cable barrier tensioning Utility cable overhead line monitoring Governor & compensating wire rope maintenance Zip lines & assault course testing Metro, tram and rail transit electric wires & catenary testing Ski lifts Tensioned trellis systems Specifications Max load 10te / 22,000lb Resolution 0.01te / 20lb Accuracy Typically 3-5% Measuring Units kg, lb, tonne & kN (selectable) Weight 2.1kg / 4.6lb Power 4 x 'AA' cell batteries Battery life 1200 hours Operating temperature -10 to +50 °C / 14 to 122˚F Protection IP67/NEMA6 Communication 2.4GHz Dimensions Refer to PDF brochure Related Products Straighpoint SW-HHP Hand-Held Display Wireless Range 700 metres StraightPoint INSIGHT Software Logging at timed intervals, manual or on overload/underload Downloads Straightpoint BOLT Fixed-Mount Cable Tension Meter - Data Sheet Straightpoint BOLT Fixed-Mount Cable Tension Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/straightpoint-bolt-fixed-mount-cable-tension-meter-p-2076.html Wed, 07 Feb 2024 20:15:37 +0000 USD 2076 Straightpoint 1000 BOLT10T https://www.abqindustrial.net/store/images/straightpoint-bolt-fixed-mount-cable-tension-meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-mz1-narrow-body-3-roller-tension-sensor-p-2075.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2075 ]]>Narrow Body 3 Roller Tension Sensor 4 Models available with capacities up to 10kg / 10 daN The MZ1 is a 3 Roller Tension Sensor built in a narrow (25mm / 1") housing designed for parallel installation to simultaneously monitor multiple fibers or wires. 4 Models available with capacities up to 10kg / 10 daN The MZ1 is a 3 Roller Tension Sensor built in a narrow (25mm / 1") housing designed for parallel installation to simultaneously monitor multiple fibers or wires. Features Compact housing for parallel mounting Easy user calibration with zero and gain adjustment Various Analog and Digital Output Signals available Built-in amplifier Specifications Accuracy ±1.5 % full scale and ±1 digit % full scale or better Other calibration material ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Output signal Standard: 0 – 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 – 10 V DC (analog), 4 – 20 mA DC (current) Option digital: USB, RS-232 or RS-422 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 – 45 ºC Humidity 85 % RH, max. Power supply +15…24 V DC, max. 21 mA (standard output) Code A3: 50 mA, Code 422: 50 mA, Code 232: 40 mA Housing material Aluminium Weight, net (gross): Approx. 420 g (580 g) Ranges Model Tension range Measuring Head Width* Calibration Material** MZ1-1000 0 – 1000 g/cN 120 mm PA: 0.30 mm Ø MZ1-2000 0 – 2000 g/cN 120 mm PA: 0.50 mm Ø MZ1-5000 0 – 5000 g/cN 120 mm PA: 0.80 mm Ø MZ1-10K 0 – 10 Kg / daN 120 mm PA: 1.00 mm Ø Other tension ranges and measuring head widths are available on request. Other measuring units available, such as g or kg. * Outer dimensions of front plate ** Suitable for 95 % of applications PA = Polyamide Monofilament Downloads MZ1 Narrow Body 3 Roller Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-mz1-narrow-body-3-roller-tension-sensor-p-2075.html Wed, 12 Apr 2023 15:39:13 +0000 USD 2075 Hans-Schmidt 1000 MZ1 https://www.abqindustrial.net/store/images/mz1-narrow-body-3-roller-tension-sensor.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-fsw-tension-sensor-p-2074.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2074 ]]>3 Tension Ranges from 0-20 Kg up to 0-100 Kg For measuring wires, ropes and cables up to a diameter of 15 mm 60mm diameter U-Grooved Rollers (radius of 3, 5 or 8 mm) Heavy-duty Tension Sensor for wires, ropes and cables up to a diameter of 15 mm 4 Tension Ranges from 0-20 Kg up to 0-200 Kg 60mm diameter U-Grooved Rollers Radius of U-Groove is 3mm (5mm and 8 mm available) Fabricated from Hardcoat Anodized Aluminum Wide range of analog and digital outputs available The new TSW Series Tension Sensor are purpose-built online tension sensor for continuous measurement of running line tensions of wires, ropes and cables and similar process materials up to a diameter of 15 mm. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference. Features U-Grooved guide rollers 80 mm OD / 60 mm root diameter with easy-running ball-bearings Radius of U-Groove offered in 3mm (standard), 5mm Code R2 or 8 mm (Code R3) Tension sensor with integrated measuring amplifier provides 0-1V DC, 0-10V DC or 4-20mA output Various digital output signals include USB, RS-232 and RS-422 Easy calibration to customized material by operator (using Zero & Gain Adjustment Pots) Includes mechanical overload protection (200%) Fabricated from Aluminum for use in tough production environments 2 Mounting possibilities: via holes in front plate or cylindrical hole mounting Requires power supply +15…24 V DC (regulated) or connection to SC-PM Tension Indicator Front Plate dimensions of 550 mm width x 100 mm Strain Gauge-based sensor provides accuracy of 1.5% Full Scale or better. Custom-designs are possible along with special features such as air fitting to create positive internal pressure in the housing for protection against airborne chemicals or contaminants Specifications Accuracy ±1.5 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range (200% total) Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Output Signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 USB Output (Option "-USB) USB Connection direct to Windows PC (requires TensionInspect Software, SW-TI3) Supplied with 3 meter USB-A to USB-B Cable. If USB Cable longer than 5 meters is required, a USB Signal Booster is required. Temperature drift Less than ±0.05 % full scale/°C Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 1500 g (approx. 1800 g) Connection to PD765 SIGNAL:Grey (Sig+) to V+, Blue (Sig-) to COM DC-POWER: White (Exc+) to P2+, Black/Brown (Exc-) to P2- Ranges Model Tension Range Measuring Head Width* Factory Calibration Material FSW-20K 0 - 20 Kg (44 Lbs) 550 mm (22") Steel rope 1.50 mm ⌀ (7x7x0.20) FSW-50K 0 - 50 Kg (110 Lbs) 550 mm (22") Steel rope 3 mm ⌀ (6x7x0.30) FSW-100K 0 - 100 Kg (220 Lbs) 550 mm (22") Steel rope 4 mm ⌀ (6x7x0.50) FSW-200K 0 - 200 Kg (440 Lbs) 550 mm (22") Steel rope 4 mm ⌀ (6x7x0.50) Guide Rollers Code Line Speed Vmax ...m/min Roller Material Standard 2000 Hardcoated aluminum (radius 3mm) Code R2 2000 Hardcoated aluminum (radius 5mm) Code R3 2000 Hardcoated aluminum (radius 8mm) Output Signal Standard Output signal: 0 - 1 VDC Code "DC" Output signal: 0 - 10 VDC Code "-MA" Output signal: 4 - 20 mA DC Code A10 Output signal: mV/Vfor sensors without amplifier Code 232 Output signal: digital: RS 232 analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Code 232-H Output signal: digital: RS 232 analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-fsw-tension-sensor-p-2074.html Wed, 12 Apr 2023 15:06:12 +0000 USD 2074 Hans-Schmidt 1000 FSW https://www.abqindustrial.net/store/images/fsw-tension-sensor.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-etb-etpb-limited-access-digital-tension-meter-p-2073.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2073 ]]>Limited Access Digital Tension Meters for fine wire and fibers with max tension range of 500 g / cN Memory, Data Output, USB, Wifi Auto Rotating Display 5 Ranges 0.3 - 100.0 grams (or cN) 2.0 - 200.0 grams (or cN) 2.0 - 500.0 grams (or cN) 3 - 1000 grams (or cN) 3 - 2000 grams (or cN) For fibers up to 500 tex and Cu wire Ø 0.17 mm The Hans-Schmidt ETB - ETPB Limited Access Digital Tension Meter is designed for accurate measurement of tension on fine wires, yarns and fibers. Rollers or Ceramic Pins are mounted at the end of long "fingers" permitting the user to measure tension with limited access space or when several lines are closely spaced such as on a warp sheet. Five (5) measuring ranges are available with a maximum capacity of 2000 grams or cN. New features include Color, backlight TFT-display with 3 different displays modes: numeric, numeric with live bargraph, numeric with graph (time vs tension). The display auto rotates in 90° steps for optimal visibility regardless of the position of the tension meter. ETB models feature miniature high speed ball-bearing-mounted rollers for material speeds up to 2000 m/min ETPB models feature non-rotating ceramic pins for material speeds up to 6000 m/min Kit Contents Hans-Schmidt ETB - ETPB Limited Access Digital Tension Meter Built-in Rechargeable Battery USB/AC adapter with country adapters (EU, US, UK, AUS/NZ) Carrying Case Features Coloured, backlight TFT-display with 3 different displays modes: numeric, numeric with live bargraph, numeric with graph (time vs tension) The display auto rotates in 90° steps for better reading Automatic Zero-Setting in each measuring position Selectable units of measure; Grams, cN, N and Lbs High data sampling rate to catch short duration peaks (1 kHz) Storage of MIN, MAX, last, average and standard deviation per measuring interval User-set MIN and MAX alarms with indication on TFT display if reading is out of limits Adjustable electronic damping for better reading when tension fluctuates 3 separate calibration material memory locations for custom calibrations User adjustment for fine tuning of the calibration if material differs from the used calibration material NIST-Traceable Calibration Certification in optionally available 1000g and 2000g models are fitted with 7.4mm diameter v-grooved rollers fabricated from hardcoat anodized aluminum Specifications Calibration According factory procedure Accuracy ±1% FS* ±1 Digit (typical ±0.5 % FS*) Memory for material calibration 1 for factory calibration plus 3 for customized calibrations Measuring units Grams cN, N, and Lbs Resolution 0.1 grams or cN Overrange Approx. 10%, full scale, without accuracy guarantee Overload protection 200% Full Scale Measuring principle Strain gauge bridge Measuring roller deflection 0.5 mm, maximum Sampling rate 200 Hz: AVG, MIN, MAX (1kHz for PEAK) Display update rate Approx. 2 times per second LCD Display Color-TFT 128 x 160 Display Modes Numeric, Numeric with Bargraph, X-Y Trendgraph (time vs. tension) Memory MIN, MAX, PEAK, AVG and LAST Damping Adjustable electronic damping (averaging) Cal. Adjustment ±10 steps in 1% increments Auto power off After approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01% FS* /°C Temperature range 50 – 113 °F (10 – 45 °C) Air humidity 85% RH, max. Built-in Battery Lithium Polymer Battery Life 20 hours continuous use (approx.) Recharging Time 3-1/2 hours (approx.) Battery Charger 100-240V AC, swappable plug adapters Plug Adapters USA, Euro and UK Housing material Aluminium Housing dimensions (L x W x H) 13" x 1-3/4" x 1" (330 x 45 x 25mm) Weight, net /gross Approx. 12 oz. (310 g) / 2.75 lbs (1220 g) Charger Part# USB-MINI-CHARGER Ranges Model Measuring Range (g or cN) Resolution (g or cN) Rollers or Pins Max Material Speed Measuring Head Width Calibration Material ETB-100 0.3 - 100.0 0.1 3.7mm Rollers 2000 meters / min 24 mm 0.20 mm PA ETB-200 2.0 - 200.0 0.1 3.7mm Rollers 2000 meters / min 24 mm 0.20 mm PA ETB-500 2.0 - 500.0 0.1 3.7mm Rollers 2000 meters / min 24 mm 0.20 mm PA ETB-1000 3 - 1000 1 7.4mm Rollers 2000 meters / min 38 mm 0.50 mm PA ETB-2000 3 - 2000 1 7.4mm Rollers 2000 meters / min 38 mm 0.50 mm PA ETPB-100 0.3 - 100.0 0.1 Ceramic Pins 6000 meters / min 24 mm 0.20 mm PA ETPB-200 2.0 - 200.0 0.1 Ceramic Pins 6000 meters / min 24 mm 0.20 mm PA ETPB-500 2.0 - 500.0 0.1 Ceramic Pins 6000 meters / min 24 mm 0.20 mm PA Downloads Hans-Schmidt ETB - ETPB Limited Access Digital Tension Meter - Data Sheet Hans-Schmidt ETB - ETPB Limited Access Digital Tension Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/hans-schmidt-etb-etpb-limited-access-digital-tension-meter-p-2073.html Wed, 12 Apr 2023 12:44:05 +0000 USD 2073 Hans-Schmidt 1000 ETB-ETPB https://www.abqindustrial.net/store/images/etb-etpb-limited-access-digital-tension-meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-tscb-series-compact-online-tension-sensor-p-2072.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2072 ]]>4 Tension Ranges from 0-100 g up to 0-1000 g 2 Roller Widths; 7 or 10 mm Diameters Compact housing design for Limited Access Space Universal Tension Sensor for Tapes, Bands and Tows (Glass and Carbon Fibers) 4 Tension Ranges from 0-100 g up to 0-1000 g 2 Roller Widths; 7 or 10 mm Diameters Can be supplied with V-Grooved or U-Grooved Rollers, TSC-Series The Hans-Schmidt TSCB-Series Compact Online Tension Sensor is a purpose-built online tension sensor for continuous measurement of running line tensions of narrow tapes, bands, webs, tows of fiberglass or carbon fibers and similar process materials. The precision-machined housing is constructed allowing for the installation of several sensors in close proximity to one another when the end-to-end spacing of the process material is limited. Multiple sensors can be mounted adjacent to another for fixed to a single rail for quick and easy mounting.. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference. Can be used for process diagnostics, for continuously monitoring and recording of online tensions. The TSCB Series Tension Sensor can also be used as part of a closed-loop control system with 3rd-Party controller. Mounting possibilities: Sensor can be mounted on a flat plate using the supplied thru holes on the underside of the housing body or fixed on the optional rail allowing for quick, easy installation and allows for multiple sensors mounted adjacent to one another with minimal spacing. Features Strain Gauge-based sensor provides accuracy of 2% Full Scale or better. Sensor can be mounted in any orientation depending upon the material path. Built-in Signal Conditioner provides 0-1 V DC Analog Output (0-10V or mv/V, optional) with Integrated Zero & Gain Pots on rear-side of sensor allowing for convenient calibration by the end-user for highest accuracy Supplied with easy-running ball-bearing mounted, flat cylindrical rollers with flanges. 7 mm wide roller is fabricated from nickel-plated steel, 10 mm roller is hardcoat anodized aluminum Rollers can be supplied with a special carbon-optimized coating ("orange peel"), Option Code CF Can be used together with SC-PM, PD765 Digital Tension Indicator or with user-supplied electronics (requires 15-24 V DC regulated power). 3-Roller design insures that the center sensor rollers has the same wrap angle at all times which allows the sensor to be mounted in any position on the line Sensor can be mounted on a flat plate using the supplied thru holes on the underside of the housing body or fixed on the optional rail allowing for quick, easy installation Slim Sensor Housing allows for multiple sensors mounted adjacent to one another with minimal spacing Includes 2 meter (6 ft) length integrated cable with open ends for connection to Tension Indicator or user-supplied electronics Specifications Accuracy ±2% full scale and ±1 digit Overload protection 100% of tension range Measuring principle Strain gauge bridge Measuring roller deflection max. 0.5 mm Signal processing analog Output signal Standard: 0-1 V DC (analog) Option: 0-10 V DC (Option "DC") or 2mV/V Direct Strain Gauge Output (Option "A10") Option "A10" Output 1 mV/V output, 5V DC power required (3-5V DC) Cable Shielded cable (2 m) with open ends Damping (fg) Standard (analog): 30 Hz Temperature drift better ± 0.05 % FS/ °C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply + 15 ... 24 V DC, 21 mA (regulated); Housing Aluminium, with threaded mounting holes on underside (M3 Thread) Housing dimensions 70 x 55 x 17 mm (L x W x H) Weight, net Approx. 100 g Connection to PD765 SIGNAL: Yellow (Sig+) to V+, Green (Sig-) to COM DC-POWER:White (Exc+) to P2+, Brown (Gnd) to P2- Ranges Model Range Measuring Head Width* Roller Width** TSCBB-100-7 0 - 100 g 70 mm 7 mm TSCBB-200-7 0 - 200 g 70 mm 7 mm TSCBB-500-7 0 - 500 g 70 mm 7 mm TSCBB-1000-7 0-1000 g 70 mm 7 mm TSCBB-100-10 0 - 100 g 70 mm 10 mm TSCBB-200-10 0 - 200 g 70 mm 10 mm TSCBB-500-10 0 - 500 g 70 mm 10 mm TSCBB-1000-10 0-1000 g 70 mm 10 mm cN units also available * Outside dimensions of the housing ** Outside dimensions of the roller Output Signal Standard 0 - 1 V DC (analog) Option Code DC: 0 - 10 V DC Option Code A10: Direct strain gauge output signal 2mV/V without amplifier Downloads TSCB-Series Compact Online Tension Sensor - Data Sheet TSCB-Series Compact Online Tension Sensor - Instruction Manual TSCB-Series Compact Online Tension Sensor - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-tscb-series-compact-online-tension-sensor-p-2072.html Wed, 05 Apr 2023 23:23:30 +0000 USD 2072 Hans-Schmidt 1000 TSCB https://www.abqindustrial.net/store/images/tscb-series-compact-online-tension-sensor.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/hans-schmidt-sc4-pm-digital-tension-indicator-p-2071.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2071 ]]>Panel mount digital display unit Suitable for connecting a maximum of 4 sensors (different ranges are possible) with analog output 0 – 1 V DC or optional series without integrated amplifier (output mV/V) The Hans-Schmidt SC4-PM Digital Tension Indicator is designed to connect to up to four (4) separate tension sensors. The current value of each of the connected sensors are shown simultaneously as a numeric value along with the engineering units Kit Contents Hans-Schmidt SC4-PM Digital Tension Indicator USB connecting cable Certificate of Compliance with the order 2.1 according EN 10204 free of charge Instruction Manual Transport Packaging Features Panel mount display unit (1/4 DIN IEC 61554 cutout – 91.5 x 91.5 mm) Required power supply +15…24 V DC (regulated) The instrument povides the required power (+15 V DC) for the connected sensor CE certified with sensor connected Suitable for connecting a maximum of 4 sensors (different ranges are possible) with analog output 0 – 1 V DC or optional series without integrated amplifier (output mV/V) Backlight, graphic LCD display with 2 different display modes: Readings wit alarm control Bar chart, reading and alarm control Various output signals are available: digital (standard): USB (front side), RS 422 (rear side) analog (optional): 0 – 10 V DC (rear side) Adjustable damping for easier reading if tension fluctuates User set limits (Min and Max alarms) and open collector output for external control units Each channel of display unit SC4-PM can be scaled to engineering units as grams, cN, daN, N, g, kg, lb and oz depending to the used sensor Easy calibration to customized material by the operator – zero and gain calibration is required for the connected sensor Possibility to store 4 different materials curves Easy operation using keys: menu for configurating the device (alarm limits, damping, units, tension range, language, material curve) The set-up menu can be password protected Specifications Digital display Graphic LCD display with backlight Engineering units cN, daN, g, kg, lb or oz selectable Adjustment 4 material curves can be saved Selectable Damping 9 adjustable settings Signal processing Digital Output signal Digital (standard): USB and RS 422 (57600, 8, N, 1)Analog (option): 0 – 10 V DC /RLast ≥ 5kΩ Input signal 0 – 1 V DC, option mV/V Alarm limits Programmable MIN.- MAX limits per sensor Alarm limits Open collector max. 30 V DC, 10 mA Exit hub Terminal strip Power supply for sensor Yes Power supply +15 … 24 V DC, 100 mA, regulated Current consumption 0.300 A Temperature range 10 – 45° C Air humidity 85 % RH, max. Housing Plastics Cut out 1/4 DIN cut out: 110 x 90 x 90 mm (LxWxH), mounting cut out 91.5 x 91.5 mm Weight, net (gross) Approx. 300 g (Approx. 1000 g) Models   Connectable Sensors Output Signal SC4-PM Sensors with amplifier (0 – 1 V) USB, RS 422, open collector SC4-PMD Sensors without amplifier (mV/V) USB, RS 422, open collector Output Signal Standard Output signal: Digital, USB 4 x open collector to connect the display to a PC Max. 200 readings can be transferred per second   Standard Output signal: Digital, RS 422 4 x open collector to connect the display to a PC Used to send data over a longer distance or multi user systems Max. 200 readings can be transferred per second Code A2 Output signal: Analog, 0 – 10 V DC Downloads Hans-Schmidt SC4-PM Digital Tension Indicator - Data Sheet Hans-Schmidt SC4-PM Digital Tension Indicator - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/hans-schmidt-sc4-pm-digital-tension-indicator-p-2071.html Tue, 09 Apr 2024 22:45:08 +0000 USD 2071 Hans-Schmidt 1000 SC4-PM https://www.abqindustrial.net/store/images/sc4-pm-panel-mount-digital-display-unit.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/tsv-1000-non-contact-tachometer-and-stroboscope-calibrator-p-2070.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2070 ]]>Non-Contact Tachometer and Stroboscope Calibrator 10 Adjustable Tachometer Set Points Measures Strobe Speed Up To 100,000 FPM or 1,666 Hz Tests Tachometers 100,000 RPM Measures Strobe Speed Up To 100,000 FPM or 1,666 Hz The Checkline TSV-1000 Non-Contact Tachometer and Stroboscope Calibrator Features Includes Traceable Calibration Certificate 10 Adjustable Tachometer Set Points Made In The USA Combination Sensor Encoder can be attached to the front panel or remotely located Downloads TSV-1000 Non-Contact Tachometer and Stroboscope Calibrator - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/tsv-1000-non-contact-tachometer-and-stroboscope-calibrator-p-2070.html Wed, 05 Apr 2023 17:29:57 +0000 USD 2070 Checkline 1000 TSV-1000 https://www.abqindustrial.net/store/images/tsv-1000-non-contact-tachometer-and-stroboscope-calibrator.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-chainsafe-chain-load-monitoring-bluetooth-tension-load-cell-p-2069.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2069 ]]>Bluetooth wireless range of 100m/328ft Designed to work along the length of 10mm chain Lightweight load cell easily attaches to the length of chain The Straightpoint ChainSafe Chain Load Monitoring Bluetooth Tension Load Cell is a Bluetooth wireless tension load cell capable of load monitoring of capacities up to 4te. Specifically designed for use along the length of the chain with an array of The Crosby Group chain fittings for applications where chain slings, chain lashing and tie-downs are used in industries such as transportation and construction to secure loads and precious cargo. The ChainSafe design has an unrivalled strength to weight ratio with a completely sealed stainless steel enclosure providing IP67 or NEMA6 environmental protection, making this industry-leading dynamometer even more suitable for use in the harshest environments. The versatile chain load monitoring device has an update rate of 1Hz and the Bluetooth signal effortlessly connects to any iOS or Android smartphone that has our free HHP app installed. This will provide the operator with a wireless range of up to 328ft or 100m – measuring the load from a safe distance. The app will also allow the operator to log data versus time or on events such as over or underload and the adjustable alarm will alert the operator on their smartphone if any overload is occurring. Kit Contents Straightpoint ChainSafe Chain Load Monitoring Bluetooth Tension Load Cell Lithium Thionyl Chloride (non-replaceable) Calibration & proof test certificate Multi-lingual user manual (HHP App) Carry / transit case RFID Tagged 2-year warranty Design validated by F.E.A. Features Designed to work along the length of 10mm chain. Bluetooth wireless range of 100m/328ft. Lightweight load cell easily attached to the length of chain. No battery change required - Battery life 5 years based on 3hrs use per day Environmentally protected to IP67/NEMA6. Internal Antennae. Conforms to EN1677:2008 Fatigue tested to 30000 cycles to 1.5x WLL. Specifications Part Number: CS4T-CROSBY Crosby Part number 2789536 Capacity MET 4te  Capacity IMP 8800lb Resolution MET 0.002te Resolution IMP 4lb Weight MET 2.5kg Weight IMP 5.5lb Safety Factor 4:1 Battery Type  Lithium Thionyl Chloride (non-replaceable) Battery Life 5 years based on 3hrs use per day. Operating Temp -10°c to +50°c / 14˚ to 122˚F Accuracy +/- 0.2% of full scale Range 100 metres / 328 feet Data Rate 1Hz Protection IP67/NEMA6 Recommended fittings 3/8" (10mm) G100 Chain fittings Applications Lashing Load Securement Tie Downs Transportation Small cranes, chain sling legs Towing chains Tension in sling legs Downloads Straightpoint ChainSafe Chain Load Monitoring Bluetooth Tension Load Cell - Data Sheet Straightpoint ChainSafe Chain Load Monitoring Bluetooth Tension Load Cell - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-chainsafe-chain-load-monitoring-bluetooth-tension-load-cell-p-2069.html Sat, 06 Jul 2024 15:35:41 +0000 USD 2069 Straightpoint 1000 ChainSafe https://www.abqindustrial.net/store/images/straightpoint-chainsafe-chain-load-monitoring-bluetooth-tension-load-cell.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-iii-fff-fruit-firmness-tester-p-2068.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2068 ]]>The HPE Fff is designed for testing the firmness / hardness of fruits, vegetables, meat, and fish. Common applications include peaches, apricots, plums, cherries, tomatoes, strawberries, apples, avocados, kohlrabi, carrots, cucumbers, radish, and more. The Bareiss HPE-III-Fff Fruit Firmness Tester penetrometer is designed for non-destructive hardness testing of fruits, vegetables, meat, and fish. A spring-loaded outer sleeve assists the operator in applying the correct pressure to achieve repeatable results. Interchangeable anvils allow for fast and accurate measurement on common applications including peaches, apricots, plums, cherries, tomatoes, strawberries, apples, avocados, kohlrabi, carrots, cucumbers, radish, and more. A built-in timer allows the operator to record the measured value after 3 seconds of contact per industry standards. The timer is adjustable as desired. Bareiss HPE-III-Fff Fruit Firmness Tester standard features include a Large LCD display, USB output, and a patented hand grip for achieving correct measuring angle and pressure. Kit Contents Bareiss HPE-III-Fff Fruit Firmness Tester USB output cable Power adapter Carrying Case Features Interchangeable anvils for testing fruits, vegetables, meat, and fish 1 Anvil is included, additional are sold separately Built-in Timer to record readings 3 seconds after contact (user adjustable) Maintenance free design Specifications Measuring Range 0-100 Empirical Units for Comparison Battery Life 200 Hours Memory 300 Readings Output USB Timer 3 Seconds after contact, user adjustable Available Anvils Size / Shape Application Ø 2.5 mm ball kohlrabi, carrots, cucumber, radish, courgette, onion (firm) Ø 5.0 mm ball avocados, papayas, apples, mangoes, cucumber, pepper,pears, oranges and citrus fruits, onions (soft) radius 6.35 mm boiled potatoes, bananas, smoked fish, boiled beetroot 0.1 cm² (Ø 3.65 mm) cylindrical peaches, apricots and plums 0.25 cm² (Ø 5.63 mm) cylindrical cherries, melons, tomatoes, blueberries, grapes, eggplant 0.50 cm² (Ø 7.98 mm) cylindrical strawberries, water melons, broccoli, meat, tofu Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-iii-fff-fruit-firmness-tester-p-2068.html Wed, 03 Jan 2024 20:12:55 +0000 USD 2068 Bareiss 1000 HPE-III-Fff https://www.abqindustrial.net/store/images/bareiss-hpe-iii-fff-fruit-firmness-tester.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-pj-pusey-jones-hardness-durometer-tester-plastometer-p-2067.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2067 ]]>The HPE-PJ Pusey & Jones Plastometer is designed for testing the hardness of rubber and rubber-like materials. It is typically used for testing rubber rollers used by the paper industry. Conforms to: ISO 7267-3, ASTM D 531 Conforms to: ISO 7267-3, ASTM D 531 The Bareiss HPE-PJ Pusey & Jones Hardness Durometer Tester Plastometer is designed for testing the hardness of rubber and rubber-like materials. It is typically used for testing rubber rollers used by the paper industry. It can also be used for testing specimens with a flat surface and thickness of 13 mm. The digital display indicates the penetration depth in mm units with 0.01 mm resolution. A specialized load weight ensures a total force of 9.8 N is applied. A built-in timer displays the measurement automatically after 60 seconds. Features Built-In Timer for Precise and Repeatable Measurement 1kg load weight RS232 Output for Connection to Optional HardTest Software Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-pj-pusey-jones-hardness-durometer-tester-plastometer-p-2067.html Wed, 03 Jan 2024 20:13:20 +0000 USD 2067 Bareiss 1000 HPE-PJ https://www.abqindustrial.net/store/images/bareiss-hpe-pj-pusey-jones-hardness-durometer.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hp-analog-durometer-p-2066.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2066 ]]>Bareiss HP Analog Durometer Available Scales: A, D, O, B C, DO, AO, E, OO, OOO, OOOS, E & Asker C Bareiss HP Durometers measure hardness according to ASTM and ISO standards. Every HP is carefully assembled and calibrated by Bareiss technicians. To reduce friction, all Durometers include precision ball bearings to ensure smooth traveling of the indentor eliminating errors caused by friction. The Bareiss HP Series is available in different Shore and non-Shore scales. They are fabricated using cast aluminum housings providing the durability required for use in tough production environments. Options include a Memory Pointer to retain the Peak Value during measurement. For measurement of round samples or on small parts or on a radius, it can be used with the BS61 Test Stand to increase repeatability and minimize operator variability. Ideally suited for hardness measurement of all natural and synthetic rubber products, plastics, acrylic glass, acetates, thermoplastics, PVC, neoprenes, hardboards, wood, leather, and fruits utilizing Shore A, A0, B, 0, C, D, D0, 00, 000, 000S, E, and Asker C scales. Please note that the number "0" is used in the part number instead of the letter "O", however, they are identical.For example an HP-D0 = HP-DO Features NIST-Traceable Calibration Certificate is optional Conforms to DIN ISO 7619, DIN EN ISO 868, NF T 51-174, ASTM D 2240, BS 903 Part. A 26 Can be used in any measurement orientation as gravity does not affect readings Optional Memory Pointer ("S" versions) holds highest reading (not available on OO and OOO models) Slide-on/off metal protection plate covers the indentor and protects it from damage when not in use (not on 00 and 000) 1-Year Warranty Specifications Measuring Range 0 - 100 units Accuracy* ±1 durometer unit (A,B,C,D,O,DO & Asker C)±2 durometer units (OO) Dial Size 50 mm Diameter Dimensions 128 x 57 x30 mm Weight 200 grams (7 ounces) Warranty 1 year * Note per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. Conforms to ASTM D-2240, DIN 53505, ISO 868, JIS K 7215 & ISO 7619. Asker C model conforms to JIS K-7312. Mounting Thread 5/16-40 Tolerance ± 0.5 at "100" and -0 +1 at "0" Models Scale Load Spring Force Foot Size Indentor Travel Min Sample Thickness Indentor Shape A 1 Kg 8.050 N 18 mm 2.5 mm 4 mm (DIN EN ISO 868)6 mm (all other standards) D 5 Kg 44.45 N 18 mm 2.5 mm 4 mm (DIN EN ISO 868)6 mm (all other standards) 0 1 Kg 8.050 N >500 mm2 2.5 mm 6 mm (all standards) B 1 Kg 8.050 N 18 mm 2.5 mm 6 mm (all standards) C 5 Kg 44.45 N 18 mm 2.5 mm 6 mm (all standards) D0 5 Kg 44.45 N >500 mm2 2.5 mm 6 mm (all standards) A0 1 Kg 8.050 N >500 mm2 2.5 mm 6 mm (all standards) E 1 Kg 8.050 N >500 mm2 2.5 mm 6 mm (all standards) 00 400 g 1.111 N >500 mm2 2.5 mm 6 mm (all standards) 000 400 g 1.111 N >500 mm2 2.5 mm 6 mm (all standards) 000S 400 g 1.932 N >500 mm2 5.0 mm 6 mm (all standards) Downloads Bareiss HP Analog Durometer - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hp-analog-durometer-p-2066.html Sun, 28 Apr 2024 11:03:03 +0000 USD 2066 Bareiss 1000 HP https://www.abqindustrial.net/store/images/bareiss-hp-analog-durometer.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-iii-digital-durometer-p-2065.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2065 ]]>Ultra-Precision Digital Durometer Conforming to DIN ISO 7619, DIN EN ISO 868, ASTM D2240, NF EN ISO 868, JISK 6253 Adjustable timer function, temperature measurement, USB output Available Scales A and D The Bareiss HPE-III Digital Durometer is the latest generation of the HPE offering many new features while providing the same precision hardness measurements. Historical measurements can be displayed for the hardness values and date/time when each measurement was taken. Standard features include a Large LCD display, USB output, and a patented hand grip for achieving correct measuring angle and pressure. Features Conforms with ASTM, DIN, and ISO Standards Built-In timer function Temperature and Humidity Measurement Optionally Available for A and D Scale Models Factory Calibration Certificate Included, DAkkS Traceable Certifcate Optional Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/bareiss-hpe-iii-digital-durometer-p-2065.html Sun, 07 Jul 2024 14:57:31 +0000 USD 2065 Bareiss 1000 HPE-III https://www.abqindustrial.net/store/images/bareiss-hpe-iii-digital-durometer.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-311d-ac-powered-digital-stroboscope-p-2064.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2064 ]]>Digital Stroboscope, AC Powered Range: 60-12,000 RPM/FPM Power: Universal 85-240 VAC Flash Range: 60-12,000 RPM/FPM The Shimpo DT-311D AC Powered Digital Stroboscope is a portable, highly stable, industrial-quality stroboscope for non-contact inspection and observation of moving parts by providing the user the illusion of stopped or slowed down equipment movement. Constructed with a rugged metal enclosure, the DT-311Ds withstand harsh, industrial usage. The included top & bottom handles aid in portability and usage flexibility. Built-in speed adjustment settings allow the flash rate to be easily altered by the user to visually inspect rotating or reciprocating machinery such as gear teeth, rotors, shafts, rewinders, printing presses, etc. all without stopping production. External trigger mode with connected remote sensor input enables the flash rate to be synchronized to the speed of the process. These features make the DT-311D universally-powered stroboscope ideal for quality inspection and preventive maintenance of automated motion equipment. Kit Contents Shimpo DT-311D AC Powered Digital Stroboscope Top & bottom handles 9.8'(3 m) power cable 3 pin female M16 threaded connector Spare Flashtube Carrying Case Features Heavy-duty construction enclosure provides exceptional durability Highly focused reflector eliminates "blind" viewing areas External trigger input allows unit to be automatically synchronized with equipment Universal power capability from 85-240 VAC allows one model to handle a multitude of local power requirements Easy tri-pod or permanent mounting with integral mounting thread Specifications Flash Range 60-12,000 fpm (flashes per minute) Accuracy ±0.01% F.S. Resolution 0.1 from 60-6,000; 1 from 6,001-12,000 Display 5 digits, 10 mm high, red LED Flashtube Power/Life Xenon ≤ 45W / 50,000,000 Flash Duration 10-30 μs automatically adjusts with flash rate External Trigger Input 5 V dc ~ 12 V dc pulse signal input (high level trigger) from sensor Sensor Power Supply 12 V DC up to 50 mA Lux Rating 8" (20 cm) Distance = 1550 lx @ 1500 fpm, 2350 lx @ 6000 fpm with 15.5" (400 mm) irradiation diameter. 20" (50 cm) Distance = 650 lx @ 1500 fpm , 580 lx @ 6000 fpm with 23.5" (600 mm) irradiation diameter Power Requirements 85-240 VAC 60/50 H (Universal) Operating Temperature 32-104 °F (0-40 °C) Dimensions 8.3 x 4.7 x 4.7" (210 x 120 x 120 mm) Unit Weight 2.3 lbs. (1.0 kg) Warranty 1 Year Certification CE, RoHS Included Accessories Top & bottom handles, 9.8'(3 m) power cable, 3 pin female M16 threaded connector Related Products QB-LED Battery Powered LED Stroboscope Peak Brightness of 5,000 Flash range of 30 - 300,000 fpm (0.5-5000 Hz) Shimpo DT-361 High-Intensity LED Stroboscope, 60 - 120,000 FPM Flash range of 30 - 300,000 fpm (0.5-5000 Hz) Downloads Shimpo DT-311D AC Powered Digital Stroboscope - Data Sheet Shimpo DT-311D AC Powered Digital Stroboscope - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-311d-ac-powered-digital-stroboscope-p-2064.html Thu, 13 Apr 2023 21:44:18 +0000 USD 2064 Shimpo 1000 DT-311D https://www.abqindustrial.net/store/images/shimpo-dt-311d-ac-powered-digital-stroboscope.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/dillon-quick-check-t-tension-meter-with-bluetooth-output-p-2063.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2063 ]]>Cable Tension Meter with Bluetooth Output for Comprehensive Site Report Generation 10,000 lb/45 kN/4500 kg Capacity Measures cables from 3/16" to 1" The Dillon Quick Check-T tension meter with Bluetooth output is designed for precise tension measurement of tower guy cables. The included mobile app produces comprehensive reports of tension readings with GPS location, date, and time which can be easily exported once the job has been completed. The QC-T can be placed on a cable, measure its tension, and removed in under three seconds! There are no complex lookup tables or conversion charts required. The operator can quickly select from 20 different wire sizes and types stored in QC-T's memory. The Check-Tensioning mode graphically displays the current and target tensions for an extremely quick setting of line tension. Even the infrequent battery changes are quick. The QC-T is used in many industries to ensure proper tensioning. Typical applications include tower and stack guy wires, zip lines, pretensioned cable barriers, bridges, elevators, winch rope, overhead electric transit wires, fall arrest systems, hll horizontal life lines, aircraft cables and utilities. Kit Contents Dillon Quick Check-T tension meter with Bluetooth Calibration check rod Wire diameter gauge Batteries Instruction Manual Heavy-duty Carrying Case Features Bluetooth Output for Comprehesive Site Report Generation View Sample Multi-wire single sheave Automatic target tension calculations Ability to capture pre and post tension readings 2 year warranty Specifications Capacity 10,000 lb/45 kN/4500 kg Accuracy ±3% instrument capacity Calibrations Up to 20 can be stored independently Operating Temperature -4°F to 158°F (-20°C to 70°C) Units of Measure lbf, kgf & Newtons Size 0 x 23 x 3” (25 x 59 x 8 cm) Weight about 11 lb (5kg) Display Dot-graphic LCD display supports full text Environmental Protection Suitable for continued outdoor use Protection Hard polymer storage case included Power 2 x AA batteries with 120+ hours life (backlight off) Calibration The QC-T includes calibration for 1 cable, each additional calibration is $110. When listing cables you must provide the diameter & construction, for example; Cable 1: 1/2", 1x7 Cable 2: 3/4", 1x19 The QC-T-TOWER includes 16 calibrations for the following size cables: 3/16" 1x7 1/4" 1x7 5/16" 1x7 3/8" 1x7 7/16" 1x7 1/2" 1x7 1/2" 1x19 9/16" 1x7 9/16" 1x19 5/8" 1x7 5/8" 1x19 11/16" 1x19 3/4" 1x19 13/16" 1x19 7/8" 1x19 1" 1x19 Related Products Dillon Quick-Check "Red"Cable Tension Meter 2 Ranges, up to 10,000lb Capacity Measures cables from 3/16" to 1" / 5 mm to 25 mm (OD) AWT05-508112 - 2000 lb / 10 kN / 1000 kg AWT05-508111 - 10000 lb / 45 kN / 4500 kg RTM 20D High CapcityCable Tension Meter 4 Rangers up to 44,000 lbf Capacity High-Capacity Cable Tension Meter Downloads Dillon Quick Check-T tension meter with Bluetooth output - Data Sheet Dillon Quick Check-T tension meter with Bluetooth output - Instruction Manual Dillon Quick Check-T tension meter with Bluetooth output - Sample Final Report Dillon Quick Check-T tension meter with Bluetooth output - Comparative Matrix Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/dillon-quick-check-t-tension-meter-with-bluetooth-output-p-2063.html Fri, 19 Jul 2024 03:48:51 +0000 USD 2063 Dillon 999 Quick-Check-T https://www.abqindustrial.net/store/images/dillon-quick-check-t.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-mechanical-c-101_35/mark-10-ac1092-shields-for-test-frames-and-test-stands-p-2062.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2062 ]]>Test Stand Sold Separately Mark-10 AC1092 Shields for Test Frames provides pinch and sample debris protection for the operator Safety shield for test frames Rugged construction of frame and shield The Mark-10 AC1092 Shields for Test Frames provides pinch and sample debris protection for the operator. An electrical interlock prevents test frame operation while the door is open. The test frame’s control panel and remote emergency stop (applicable models, only) mount to the shield’s extruded frame. See Compatibility tab to select an appropriate shield for your test frame Shields require an auxiliary limit connector in the rear of a Mark-10 test stand or frame. This connector is temporarily not installed due to supply constraints. However, a limited number of connectors are available for factory installation upon request, at time of order or as a retrofit. Specifications HS Code 9024800000 ECCN EAR99 Compatibility Test Frame Model Shield Model F105 / F305 / F505* AC1092-2 F105 / F305 / F505 + column extension up to 24”* AC1092-1 F755* AC1092-1 F755S* AC1092-2 F1505* AC1092-1 F1505S* AC1092-2 ESM303 AC1092-4 ESM303 + column extension up to 24” AC1092-3 ESM750 AC1092-1 ESM750S AC1092-2 ESM1500 AC1092-1 ESM1500S AC1092-2 * An emergency stop connector must be installed in the test frame, at the factory or in the field. See Ordering Information. Downloads Mark-10 AC1092 Shields for Test Frames - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-mechanical-c-101_35/mark-10-ac1092-shields-for-test-frames-and-test-stands-p-2062.html Mon, 26 Jun 2023 20:24:46 +0000 USD 2062 Mark-10 1000 AC1092 https://www.abqindustrial.net/store/images/mark-10-ac1092-shields-for-test-frames.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-fs06-tension-and-compression-force-sensors-p-2061.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2061 ]]>Measure tension and compression force Suitable for larger and heavier grips and fixtures Compatible with Model F105, F305, F505, and F505H test frames The Mark-10 Series FS06 Tension and Compression Force Sensors is designed to accommodate bulkier grips and fixtures, they are compatible with Series F test frame models up to 500 lbF / 2.2 kN. With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter AC1083 required). Ranges are available from 50 to 500 lbF [250 N to 2.5 kN]. Compatible with Models F105, F305, F505, and F505H. Features Measure tension and compression force Suitable for larger and heavier grips and fixtures Compatible with Model F105, F305, F505, and F505H test frames Member of the Plug & Test® family of interchangeable sensors and indicators (optional adapter AC1083 required) NIST-traceable certificate of calibration with data is included Warranty: 3 years Specifications   FS06-50 FS06-300 Weight FS06-200: 1.7 lb [0.8 kg] FS06-500: 1.9 lb [0.9 kg] Accuracy ± 0.15% of full scale + indicator or test frame Safe Overload 150% of full scale HS code 9024900000 ECCN EAR99 Force Ranges - capacity/resolution Model lbF ozF gF kgF N kN FS06-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - FS06-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - FS06-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 FS06-300 300 x 0.2 4800 x 5 - 150 x 0.1 1500 x 1 1.5 x 0.001 FS06-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 Downloads Mark-10 Series FS06 Tension and Compression Force Sensors - Data Sheet Mark-10 Series FS06 Tension and Compression Force Sensors - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-fs06-tension-and-compression-force-sensors-p-2061.html Tue, 02 Apr 2024 18:44:01 +0000 USD 2061 Mark-10 1000 FS06 https://www.abqindustrial.net/store/images/fs06-tension-and-compression-force-sensors.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-r07-s-beam-force-sensor-p-2060.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2060 ]]>20 ft Connecting Cable Unique Plug & TestTM connector holds all calibration and configuration data Measures tensile and compressive forces The Mark-10 Series R07 S-Beam Force Sensor is the designed for Series F test frames. With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator. Ranges available from 50 to 1,500 lbF [250 N to 7.5 kN]. Compatible with Models F755, F755S, F1505, and F1505S test frames. Not compatible with Models F105, F305, F505, and F505H. Features 20 ft Connecting Cable Unique Plug & TestTM connector holds all calibration and configuration data Measures tensile and compressive forces NIST-traceable certificate of calibration included Warranty: 3 years Specifications   MR07-50 MR07-300 MR07-1500 Weight MR07-200: 1 lbs [0.5 kg] MR07-1000: 2 lbs [0.9 kg] 3 lbs [1.4 kg] Accuracy ± 0.15% of full scale + indicator or test frame Safe Overload 150% of full scale HS code MR07 (all models): 9024900000 | AC1084: 9024800000 ECCN EAR99 Force Ranges - capacity/resolution Model lbF ozF gF kgF N kN MR07-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - MR07-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - MR07-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 MR07-300 300 x 0.2 4800 x 5 - 150 x 0.1 1500 x 1 1.5 x 0.001 MR07-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 MR07-750 750 x 0.5 12000 x 10 - 375 x 0.2 3750 x 2 3.75 x 0.002 MR07-1000 1000 x 0.5 16000 x 10 - 500 x 0.2 5000 x 2 5 x 0.002 MR07-1500 1500 x 1 24000 x 20 - 750 x 0.5 7500 x 5 7.5 x 0.005 Downloads Mark-10 Series R07 S-Beam Force Sensor - Data Sheet Mark-10 Series R07 S-Beam Force Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-r07-s-beam-force-sensor-p-2060.html Tue, 02 Apr 2024 18:59:29 +0000 USD 2060 Mark-10 999 R07 https://www.abqindustrial.net/store/images/r07-s-beam-force-sensor.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-lr-tension-and-compression-test-frame-p-2059.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2059 ]]>EasyMESUR Tension and Compression Force Test Frame Capacities up to 500 lbs / 2.2 kN Force vs Distance Measurement, Break Detection, Load Holding, and many other features OPTIONAL Made in the USA, 3-Year Warranty 4 Models F105 - 100 lb / 0.5 kN - Vertical F305 - 300 lb / 1.3 kN - Vertical F505 - 500 lb / 2.2 kN - Vertical F505H - 500 lb / 2.2 kN - Horizontal Load Cell and Grips Sold Separately The Mark-10 Easy MESUR-LR Tension and Compression Test Frame is engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more. Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library. Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed. Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available. Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens. Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Kit Contents The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories: Control panel, mounting bracket, and hardware #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 F/F coupler Adapter, 5/16-18M to #10-32F Set screw, #10-32 x 3/4” 2 Hex nut, #10-32 Power cord Allen wrench set Specifications F105-EM F305-EM F505-EM F505H-EM Load capacity* 100 lbF [0.5 kN] 300 lbF [1.3 kN] 500 lbF [2.2 kN] Maximum travel 18.0 in | [457 mm] Standard speed range 0.5 – 13 in/min | [13 – 330 mm/min] Optional speed range 0.02 – 45 in/min | [0.5 – 1,100 mm/min] Load accuracy (% of full scale) Test frame: ±0.1% Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15% Load sampling rate 5,000 Hz Data acquisition rate 100 Hz Speed accuracy ±0.2% of setting, virtually no variation with load Position accuracy ±0.006 in [0.15 mm], at any load or position Distance resolution 0.001 in [0.02 mm] Limit switch repeatability ±0.001 in [0.03 mm] Overload protection Motor stops at 120% of full scale of the force sensor Power Universal input 100-240 VAC, 50/60 Hz, 120W Fuse type 1.2 A, 250V, 3AG, SLO BLO Weight (test frame only) 60 lb [27 kg] 70 lb [32 kg] Shipping weight 75 lb [34 kg] 85 lb [39 kg] Environmental conditions Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 Conformance CE, UKCA Warranty 3 years [see individual statement for further details] * Load capacity is reduced at higher speeds, as follows: F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min Model No. HS Code ECCN Country of Origin F105-EM F305-EM F505-EM F505H-EM AC1094-1,-2, -3 AC1095-1,-2,-3 9024900000 EAR99 USA AC1092-1,-2 CERT-DS 9024800000 Functions Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process. A complete options package (EMP-COMP-1) is also available, including all of the below features at a discounted price. The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation. Individual Functions Function Part No. Description Co-requirements Distance Measurement EMF001-1 Measure distance, with the ability to zero the reading. - Distance Limits EMF002-1 Stop at user-defined upper and lower distance limits. - Distance Measurement (EMF001-1) Preload EMF003-1 Zero the travel position automatically at a user-defined preload value. - Distance Measurement (EMF001-1) High Speed Extension EMF004-1 Extend the high end of the speed range, dependent upon test frame model. - Low Speed Extension EMF005-1 Extend the low end of the speed range, dependent upon test frame model. - Cycling EMF006-1 Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits. - If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1) Break Detection EMF007-1 Stop when a user-defined drop in force occurs. - Load Holding EMF008-1 Stop at, and maintain, a user-defined load for a specified period of time. - FollowMe® EMF009-1 Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force. - Graphing & Reporting EMF010-1 Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information. - If graphing load vs. distance, add Distance Measurement (EMF001-1) PC Control EMF011-1 Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls. - AC1107 cable, test frame to PC Packages Package Part No. Includes Distance Measurement EMP001-1 Distance Measurement (EMF001-1) Distance Limits (EMF002-1) Preload (EMF003-1) Speed Extension EMP002-1 High Speed Extension (EMF004-1) Low Speed Extension (EMF005-1) Advanced Functionality EMP003-1 Cycling (EMF006-1) Break Detection (EMF007-1) Load Holding (EMF008-1) FollowMe® (EMF009-1) Complete Options EMP-COMP-1 All functions Related Products Mark-10 Series FS05 Tension and Compression Force Sensors Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN Mark-10 Series FS06Tension and Compression Force Sensors Measure tension and compression force Suitable for larger and heavier grips and fixtures Mark-10 Series R07 S-Beam Force Sensor Mark-10 AC1092Shields for Test Frames and Test Stands Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN Downloads Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Data Sheet Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Instruction Manual Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-lr-tension-and-compression-test-frame-p-2059.html Tue, 02 Apr 2024 20:09:25 +0000 USD 2059 Mark-10 997 EasyMESUR-LR https://www.abqindustrial.net/store/images/mark-10-easymesur-lr-tension-and-compression-test-frame.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-rhih-hygrohood-for-trems-xtra-p-2058.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2058 ]]>Insulated Hygrohood for Concrete RH testing British Standard Concrete testing Hygrohood and Remote Monitoring with the TREMS-Xtra The Tramex RHIH Hygrohoodfor TREMS-XTRA is used in conjunction with the TREMS-Xtra Remote Environmental Monitoring System to monitor the relative humidity and temperature of concrete and cementitious structures remotely and overtime. British Standard Concrete testing When used for RH testing of concrete floors and screeds, the Tramex Hygrohood complies to British Standards codes of practice BS8201, BS8203 and BS5325 that state that a concrete floor or screed should be sufficiently dry to allow installation of a resilient floor covering and should be tested using the insulated impermeable hood method. The Hygrohood can be used in conjunction with a Tramex external relative humidity probe and either a Tramex CMEX5 concrete moisture meter, a FeedBack Datalogger, or a TREMS-Xtra monitoring system. Hygrohood and Remote Monitoring with the TREMS-Xtra The TREMS-Xtra comprises a TRAMEX Cloud Station, 5 CS-RHTX Tramex Cloud Sensors for ambient conditions, and 5 external Relative Humidity probes. These external probes extend the benefits of the remote monitoring system allowing for use with the Tramex Hygrohood as well as for in-situ readings within building structures cavities in walls and ceilings and in situ RH readings in concrete. Each or any of the Cloud Sensors in your system can be connected to a Hygrohood onsite to transmit relative humidity, temperature (°C and °F), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors and Hygrohoods on the Tramex Cloud platform. Hygrohood Testing Before positioning the Hygrohood on the concrete or cementitious structure, the surface should be clear of any foreign materials and clean of any dust or loose materials that could affect a proper seal between the hood and the surface. Using butyl tape, seal the insulated Hood to the concrete surface. Insert the external probe into the hood. Connect the TREMS-Xtra system following the setup procedure for this system. Specifications Hygrohood Specifications Size 195mm x 195mm x 55mm Weight 30g Construction ABS Body Relative Humidity Sensor Temperature Sensor Specifications Exceptional Accuracy ±0.1 °C Range 20°C to 60°C (±0.1°F Range 68°F to 140°F) Range -40°C to 125°C  (-40°F to 257°F) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-rhih-hygrohood-for-trems-xtra-p-2058.html Fri, 09 Feb 2024 14:31:59 +0000 USD 2058 Tramex 1000 RHIH-TREMS-XTRA https://www.abqindustrial.net/store/images/tramex-rhih-hygrohood-for-trems-xtra.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-trems-xtra-remote-environmental-monitoring-system-xtra-p-2057.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2057 ]]>Monitor Ambient and In-situ Temperature and Relative Humidity remotely With Secure Monitoring Software Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available The Tramex TREMS-Xtra Remote Environmental Monitoring System Xtra is design and developed by Tramex for professionals who depend on the most accurate, reliable, real-time building environment temperature and relative humidity readings using state of the art technology to respond quickly to environmental changes and notify users. The Tramex TREMS-Xtra Remote Environmental Monitoring System Xtra comprises a Tramex Cloud Station router,CS-RHTX Tramex Cloud Sensors for ambient conditions, as well as external Relative Humidity probes. These external probes extend the benefits of the remote monitoring system allowing for in-situ readings within building structures cavities in walls and ceilings and in situ RH readings in concrete. Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with battery life of up to 15 years, transmit relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data with the Tramex Remote Environmental Monitoring System. Kit Contents Tramex TREMS-Xtra-5 Remote Environmental Monitoring System Xtra 5 x Tramex CS-RHTX Tramex Cloud Sensors 5 x Tramex RHP-SW Relative Humidity Probes for in-situ 1 x Tramex Cloud Station 1 x Tramex MAXMULTI Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Antennae for Cloud Station Tramex TREMS-Xtra-25 Remote Environmental Monitoring System Xtra 25 x Tramex CS-RHTX Tramex Cloud Sensors 25 x Tramex RHP-SW Relative Humidity Probes for in-situ 1 x Tramex Cloud Station 1 x Tramex MAXMULTI Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Antennae for Cloud Station Tramex TREMS-Xtra-50 Remote Environmental Monitoring System Xtra 50 x Tramex CS-RHTX Tramex Cloud Sensors 50 x Tramex RHP-SW Relative Humidity Probes for in-situ 1 x Tramex Cloud Station 1 x Tramex MAXMULTI Heavy Duty Protective Carry Case Tramex Cloud Software Monitoring platform (Tablet not included) Antennae for Cloud Station Features Ambient Relative Humidity and Temperature In-Situ Ambient Relative Humidity and Temperature Remote Environmental Monitoring System Cloud Specifications Cloud Xtra Sensor Temperature Sensor Specifications Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift < 0.04ºF (0.03ºC) per year  Relative Humidity Sensor Specifications Exceptional Accuracy ±1.5%RH Range 0% to 80%RH, ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC)) Range 0 to 100%RH Resolution 0.1% over the complete range Drift < 0.25%RH per year Sensor Specifications Transmission Range Up to 2 miles line-of-sight Communication Frequency Multiple readings per hour. Identification Items individually coded for ease of install and logging identification. Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power Built in CR123A battery with up to 15 year lifespan Included Wall Mounting Relative Humidity Sensor Temperature Sensor Specifications Exceptional Accuracy ±0.1ºF Range 68ºF to 140ºF± (0.1 °C Range 20°C to 60°C) Range -40ºF to 257ºF  (-40ºC to 125ºC) Sensor Protection PTFE Film protects sensor opening from water & dust Drift < 0.04ºF (0.03ºC) per year  Relative Humidity Sensor Specifications Exceptional Accuracy ±1.5%RH Range 0% to 80%RH, ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC)) Range 0 to 100%RH Resolution 0.1% over the complete range Drift < 0.25%RH per year Tramex Cloud Specifications Frequency Region Specific frequency available Security WPA2-PSK encryption, no unwarranted telemetry/tracking. Size 5.12" x 4.53" x 1.19" (130mm x 115mm x 30mm) Weight 9.5oz (270g) Power Universal AC Power Adapter Construction Wall-mountable Industrial Aluminium Data is stored free of charge for a period of 2 years, after which, following our data retention policy, you will need to download it. Kit Specifications Size 17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm) Weight 7.6lbs (3.56kg) Power 5 x CR123A 3-volt batteries (included) Related Products Tramex TREMS Remote Environmental Monitoring System With Secure Momitoring Software Ambient relative humidity and temperature Remote Environmental Monitoring System Tramex AP-TREMS Remote Environmental Monitoring System Accessory Pack Add more Cloud Sensors to your monitoring project Ambient relative humidity and temperature Remote Environmental Monitoring System Tramex RHIH Hygrohood for TREMS-XTRA Insulated Hygrohood for Concrete RH testing British Standard Concrete testing Hygrohood and Remote Monitoring with the TREMS-Xtra Downloads Tramex TREMS-Xtra-5 Remote Environmental Monitoring System Xtra - Data Sheet Tramex TREMS-Xtra-25 Remote Environmental Monitoring System Xtra - Data Sheet Tramex TREMS-Xtra-50 Remote Environmental Monitoring System Xtra - Data Sheet Tramex Remote Environmental Monitoring System Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/remote-environmental-monitoring-system-c-107_127_172/tramex-trems-xtra-remote-environmental-monitoring-system-xtra-p-2057.html Wed, 31 Jan 2024 21:24:44 +0000 USD 2057 Tramex 1000 TREMS-XTRA https://www.abqindustrial.net/store/images/tramex-trems-xtra-remote-environmental-monitoring-system-xtra.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-366-battery-powered-led-stroboscope-p-2056.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2056 ]]>Battery LED Powered Stroboscope Range: 30 to 120,000 FPM; 1-2000 Hz Backlit LCD display aids usage while operating in dimly lit areas The Shimpo DT-366 Battery Powered LED Stroboscope is a portable, battery-powered stroboscope that utilizes super bright CREE High-Powered LED lamps. The DT-366’s LED array provides a bright, stable strobe light over a wide measurement range with a lifetime far exceeding xenon-lit stroboscopes. Combined with large, backlit LCD display, operation is simple with the 8 button keypad and quick rate-adjustment dial. Phase shift, flash duration, plus flash rate all are easily viewed and adjustable. The unit can function by user altered flash frequency or from a remote sensor’s signal input which will automatically adjust the stroboscope to the corresponding process fluctuations. Containing a rechargeable lithium battery, a single charge is able to last up to a full 12 hours of operation. The Shimpo DT-366 Battery Powered LED Stroboscope is designed for speed and frequency measurements in motion and vibration analysis applications. It is ideal for predictive and preventive maintenance applications such as: motors, shafts, roto-gravure printing, extruders, blow molding, wire lettering and striping, engraving, pulse jets, water jets, fans, cams, gear teeth, belt inspections, fuel injectors, vibration analysis, spindle spinning, cutting blade timing and sharpness, plus many more in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries. Kit Contents DT-366 Battery Powered LED Stroboscope Power Charging Adapter with Cord Bottom and Top Handle Carrying Case Features LED technology greatly extends operation life and eliminates need to replace burned out bulbs Backlit LCD display aids usage while operating in dimly lit areas Easy adjustment with flash dial combined with x2/÷2 and fine tuning +/- buttons enables precise flash setting Fast-charge rechargeable battery provides exceptional, long-term usage reliability Adjustable Flash Pulse duration achieves sharper images for detailed inspection Phase shift (in degrees of delay time) enables visual analysis of rotating or reciprocating objects through all points of motion/time/angle Flash rate may be synchronized with process speed with input from sensor or controller 1/4-20 UNC connection for permanent mount applications (remove trigger handle) Specifications Flash Rate Range 30 to 120,000 FPM ; 1-2000 Hz Accuracy 0.01% ±1 digit of F.S. @ 77° F (25°C) Lux Rating @ 6000FPM Distance 8˝ (20 cm) 6850 lx with 10˝ (254 mm) irradiation dia., Distance 20˝ (50 cm) 2325 lx with 14˝ (355 mm) irradiation dia. Lux Rating @ 1500FPM Distance 8˝ (20 cm) 3395 lx with 10˝ (254 mm) irradiation dia., Distance 20˝ (50 cm) 1350 lx with 14˝ (355 mm) irradiation diav Lamp Lifetime Approximately 3~5 years depending on usage. Display Backlit LCD Resolution 60 ~12,000 FPM = 0.1 FPM; 12,001~120,000 FPM = 1 FPM; 1~200 HZ = 0.01 Hz; 201~2000 = 0.1 Hz Flash Duration 0.1°- 2.5° Power Requirement 100-240 VAC 50/60Hz Battery Lithium DC 16.8V 2600 mAh Battery Life Approx. 12 hrs depending on settings External Sensor Input 15 V Pulse Input; Mini-USB Sensor Power Supply 15 V dc up to 50 mAh Input Pulse Width Over 50 μs Input Signal Flash Delay 0-999 ms; 0-359° Temperature Limits 32-95°F (0-35°C) Humidity Limits 35 to 85% RH Enclosure Aluminum & ABS Product Weight 2.15 lb (0.98 kg) Approvals CE Warranty 1-Year Downloads Shimpo DT-366 Battery Powered LED Stroboscope - Data Sheet Shimpo DT-366 Battery Powered LED Stroboscope - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-366-battery-powered-led-stroboscope-p-2056.html Sat, 10 Dec 2022 16:43:07 +0000 USD 2056 Shimpo 995 DT-366 https://www.abqindustrial.net/store/images/dt-366-battery-powered-led-stroboscope.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f755-f1505-advanced-test-frames-p-2055.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2055 ]]>Mark-10 F755 - F1505 Advanced Test Frames Rigid and precise by design External limit switches Easy-to-service electronics The Mark-10 F755 - F1505 Advanced Test Frames are designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures. Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device. Kit Contents The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames include the following accessories: Control panel, mounting bracket, and hardware USB cable Eye end kit for base Includes:eye end,anchor pin, (2) lock rings 2 Spanner wrench Power cord Allen wrench set NIST-traceable certificate of calibration, force The F755-IM, F755S-IM, F1505-IM, and F1505S-IM advanced test frames include the following accessories: USB flash drive containing software installation files USB dongle USB cable Eye end kit for base Includes: eye end, anchor pin, 2 - lock rings 2 - Spanner wrench Power cord Allen wrench set NIST-traceable certificate of calibration, force Features Rigid and precise by design Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load. External limit switches Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement. Easy-to-service electronics Most electronics are housed in an integrated module, easily replaced without special tools or processes. Specifications F755 F755S F1505 F1505S Load capacity1 750 lbF [3.4 kN] 1,500 lbF [6.7 kN] Maximum travel 32.0 in [813 mm] 14.2 in [360 mm] 32 in [813 mm] 14.2 in [360 mm] Speed range 0.001 - 60 in/min [0.02 - 1,525 mm/min] 0.001 - 70 in/min [0.02 - 1,800 mm/min] Load accuracy (% of full scale) Test frame + force sensor, calibrated together: ±0.1% Test frame alone: ±0.1% Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% Speed setting accuracy ±0.2% Load sampling rate 20,000 Hz Data acquisition rate 1,000 Hz Speed accuracy ±0%, stepper motor driven Distance accuracy ±0.002 in [0.05 mm], factory-compensated at up to full load Distance resolution 0.0005 in [0.01 mm] Limit switch repeatability ±0.001 in [0.03 mm] Power Universal input 100-240 VAC, 50/60 Hz, 300W Universal input 100-240 VAC, 50/60 Hz, 450W Fuse type 4A, 3AG, SLO BLO Weight (test frame only) 184 lb [83 kg] 149 lb [68 kg] 197 lb [89 kg] 157 lb [71 kg] Shipping weight 235 lb [107 kg] 195 lb [88 kg] 247 lb [112 kg] 205 lb [93 kg] Environmental conditions Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 Warranty 3 years [see individual statement for further details] Conformance CE Load capacity is reduced at higher speeds, as follows: F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min May be extended via single- or double-column extensions. Model No. HS Code ECCN Country of Origin F755-IMT, -IM F755S-IMT, -IM F1505-IMT, -IM F1505S-IMT, -IM AC1093-1,-2 AC1093 9024900000 EAR99 USA CERT-DS 9024800000 IntelliMESUR IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including: Limit testing to a load, break, or distance Height measurement Load holding Cycle testing Multi-step testing, utilizing any combination of the above functions Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report. From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification. Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup. Load Limit Distance Limit Break Limit Load Hold Cycle Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from: Move to load Move to distance Move to break Hold a load or position Hold a load or position Loop / cycle Datum Prompts Save current load or position Zero load or position Return to Home position Model Description Test Frame + Pre-configured Tablet Control Panel Model Description F755-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V* F755S-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V* F1505-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V* F1505S-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V* Test Frame + Standalone Software (for customer installation on a Windows device) Model Description F755-IM Test frame with IntelliMESUR® software, single license, vertical, 750 lbF / 3.4 kN, 110V* F755S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 750 lbF / 3.4 kN, 110V* F1505-IM Test frame with IntelliMESUR® software, single license, vertical, 1,500 lbF / 6.7 kN, 110V* F1505S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V* All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified. Related Products  Mark-10 ESM303 High Performance Motorized Test Stand Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min) USB output of force vs. time or force vs. travel (with optional travel measurement) Mark-10 Series FS05 Tension and Compression Force Sensors Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN Downloads Mark-10 F755 - F1505 Advanced Test Frames - Data Sheet Mark-10 F755 - F1505 Advanced Test Frames - Instruction Manual Mark-10 F755 - F1505 Advanced Test Frames - Quick Guide Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f755-f1505-advanced-test-frames-p-2055.html Tue, 02 Apr 2024 20:05:26 +0000 USD 2055 Mark-10 1000 F755-F1505 https://www.abqindustrial.net/store/images/mark-10-f755-f1505-advanced-test-frames-test-stands-motorized.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-cth02-cutting-tip-holder-p-2054.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2054 ]]>1.6" (4.1cm) long overall 0.47" (1.2cm) tall exclusive of feet and tip(s) 0.98" (2.5cm) deep The CTH02 (two-tip) Cutting Tip Holder allows easy use of carbide cutting tips without having to manipulate the Tooke® Paint Inspection Gage to make the incision and then manipulate the gauge again to view the incision through the microscope If your coatings tend to be right on the cusp between using one tip or another, this two-tip holder lets you keep your two most-used tips at the ready. You can “bracket” your incision angles by mounting two different tips to create different incising geometries. 1.6" (4.1cm) long overall 0.47" (1.2cm) tall exclusive of feet and tip(s) 0.98" (2.5cm) deep Each tip slot in the CTH02 has two set screws at 90 degrees to each other to securely hold the cutting tip in place. Older version shown: CTH02 is now anodized for a better finish. Held (upside-down/backwards) for scale and to show a mounted cutting tip. Note that the mounted tip is inserted so that the relief cut (the rounded cut on the tip edge) is drawn toward the user. That is, the edge with the relief cut leads the cut. This allows material cut away by the tip to curl up and away from the incision, allowing for a cleaner cut. Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-cth02-cutting-tip-holder-p-2054.html Wed, 31 Aug 2022 17:17:39 +0000 USD 2054 Micro-Metrics 1000 CTH02 https://www.abqindustrial.net/store/images/micro-metrics-cth02-cutting-tip-holder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-cth01-cutting-tip-holder-p-2053.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2053 ]]>1.6" (4.1cm) long overall 0.47" (1.2cm) tall exclusive of feet and tip(s) 0.98" (2.5cm) deep The Cutting Tip Holder, at a little under two inches long, allows easy use of a cutting tip without having to manipulate the Tooke® Paint Inspection Gage to make the incision and then manipulate the gauge again to view the incision through the microscope. Make multiple incisions with your most-used tip without having to return the gauge to viewing position multiple times. A tip storage compartment holds two additional tips. 1.6" (4.1cm) long overall 0.47" (1.2cm) tall exclusive of feet and tip(s) 0.98" (2.5cm) deep The cutting tip is held securely by set screws from the side and end of the cutting tip holder to provide 90-degrees of support. The tip storage compartment set screw is shown below raised to allow access to the stored tips Tip storage compartment The tipholder has a tip storage compartment that can hold two tips. The wrench provided with the Tooke Gage is used to open and close the set screw that holds the tips in the compartment. Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/micro-metrics-cth01-cutting-tip-holder-p-2053.html Wed, 31 Aug 2022 17:17:21 +0000 USD 2053 Micro-Metrics 1000 CTH01 https://www.abqindustrial.net/store/images/micro-metrics-cth01-cutting-tip-holder.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ap-trems-remote-environmental-monitoring-system-accessory-pack-p-2052.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2052 ]]>Add more Cloud Sensors to your monitoring project Ambient relative humidity and temperature Remote Environmental Monitoring System The Tramex AP-TREMS Remote Environmental Monitoring System Accessory Pack adds more Cloud Sensors to your TREMS project. The Tramex AP-TREMS Remote Environmental Monitoring System Accessory Pack comprises CS-RHTA Tramex Cloud Sensors. Multiple Sensors can be used with one Tramex Cloud Station. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with battery life of up to 15 years, transmit relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data storage for two years with the Tramex Remote Environmental Monitoring System. Kit Contents Tramex AP-TREMS-5 Remote Environmental Monitoring System Accessory Pack 5 x CS-RHTA Tramex Cloud Sensors Tramex Cloud Software Monitoring platform (Tablet Not Included) Tramex AP-TREMS-10 Remote Environmental Monitoring System Accessory Pack 10 x CS-RHTA Tramex Cloud Sensors Tramex Cloud Software Monitoring platform (Tablet Not Included) Features Ambient relative humidity and temperature Remote Environmental Monitoring System Specifications Temperature Sensor Specifications Exeptional Accuracy ±0.1 °C Range 20°C to 60°C (±0.1ºF Range 68ºF to 140ºF) Range -40ºC to 125ºC  (-40ºF to 257ºF) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ap-trems-remote-environmental-monitoring-system-accessory-pack-p-2052.html Sun, 18 Feb 2024 13:32:56 +0000 USD 2052 Tramex 1000 AP-TREMS https://www.abqindustrial.net/store/images/tramex-ap-trems-remote-environmental-monitoring-system-accessory-pack.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-trems-remote-environmental-monitoring-system-p-2051.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2051 ]]>Monitor Temperature and Ambient Relative Humidity Remotely with Secure Monitoring Software Remote Environmental Monitoring System Tablet Not Included The Tramex TREMS Remote Environmental Monitoring System has been designed and developed by Tramex for professionals who depend on the most accurate, reliable, real-time building environment temperature and relative humidity readings using state of the art technology to respond quickly to environmental changes and notify users. The Tramex TREMS Remote Environmental Monitoring System comprises CS-RHTA Tramex Cloud Sensors and a Tramex Cloud Station router. Multiple Sensors can be used with one Station and additional sensor Accessory Packs are also available. Registration and on-site set-up is simple using a QR code check-in procedure. The on-site Sensors, with long-life batteries, transmit relative humidity, temperature (ºC and ºF), dew point and grains per pound / grams per kilo readings wirelessly via the Tramex Cloud Station enabling remote monitoring of up to 200 on-site Sensors on the Tramex Cloud platform. Tramex Cloud is a secure platform to store and report your moisture, temperature and relative humidity measurements, get notified of adverse conditions and quickly monitor status from any browser. There are no subscription fees and there is free data with the Tramex TREMS Remote Environmental Monitoring System. Kit Contents Tramex TREMS-2 Remote Environmental Monitoring System 2 x CS-RHTA Tramex Cloud Sensors 1 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-5 Remote Environmental Monitoring System 5 x CS-RHTA Tramex Cloud Sensors 1 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-10 Remote Environmental Monitoring System 10 x CS-RHTA Tramex Cloud Sensors 1 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-25 Remote Environmental Monitoring System 25 x CS-RHTA Tramex Cloud Sensors 1 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-50 Remote Environmental Monitoring System 50 x CS-RHTA Tramex Cloud Sensors 2 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-75 Remote Environmental Monitoring System 75 x CS-RHTA Tramex Cloud Sensors 4 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Tramex TREMS-100 Remote Environmental Monitoring System 100 x CS-RHTA Tramex Cloud Sensors 4 x Tramex Cloud Station 1 x Tramex ALLBAG Carrying Case Tramex Cloud Software Monitoring platform (Tablet Not Included) Antennae for Cloud Station Features Ambient relative humidity and temperature Remote Environmental Monitoring System Specifications Temperature Sensor Specifications: Exeptional Accuracy ±0.1 °C Range 20°C to 60°C (±0.1ºF Range 68ºF to 140ºF) Range -40ºC to 125ºC  (-40ºF to 257ºF) Sensor Protection PTFE Film protects sensor opening from water & dust Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-trems-remote-environmental-monitoring-system-p-2051.html Sun, 18 Feb 2024 12:45:33 +0000 USD 2051 Tramex 1000 TREMS https://www.abqindustrial.net/store/images/tramex-trems-remote-environmental-monitoring-system.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jx-30-wood-moisture-meters-p-2050.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2050 ]]>Large, custom display with auto backlight – easy to ready under all conditions MC Range – 6%-60% Wood (Douglas Fir) Species – 100 plus 123 additional available The Delmhorst JX-30 Moisture Meters is the latest meters in the new Navigator family!Bringing lumber/woodworking, flooring professionals and inspectors two more professional-grade, accurate and versatile tools to address moisture issues and perform your job with complete confidence.The JX-30 features the Delmhorst EDGE™ App with expanded wood species, customizable settings, and the ability to share data from any location. Kit Contents Delmhorst JX-30W/CS Moisture Meters Delmhorst JX-30 Moisture Meters Carrying Case Delmhorst JX-30/P01 Moisture Meters Delmhorst JX-30 Moisture Meters 26-ES hammer electrode extra pins (10x 496, 2x 2498/A-100) Carrying Case Features Large, custom display with auto backlight – easy to ready under all conditions MC Range – 6%-60% Wood (Douglas Fir) Species – 100 plus 123 additional available Wood temperature correction (°F/°C) Pins/electrode correction (insulated or non-insulated) Alarm set point - alerts to user-selected MC level On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m Integral contact pins max 5/16” penetration (use 2498/A-100) Compatible with any Delmhorst external electrode. Color-coded LED’s – adjustable through EDGE ™app Power – 2x AA batteries – Alkaline Energizer ( incl) QR code on meter for easy access to support materials Size: meter only - 8.65in (2.2mm) x 2.85in (72mm) x 1.55in (39mm); in carry case - 9.5in (241mm) x 6.5in (165mm) x 2.5in (64mm) Weight: meter only - 0.4.5oz (1.3g); in carry case - 18oz (510g) Sturdy plastic carrying case – (incl) 2-year warranty on manufacturer’s defects. Bonus extended warranty with on-line registration. Accessories and Electrodes Delmhorst 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. Delmhorst 2497/A-100 - pack of 24 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst 305RET-0021 - pack of 2 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. Delmhorst 632 - pack of 4 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. Delmhorst A-111- pack of 24 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 7/16" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. Delmhorst HP-1 Makes pilot holes in stucco to reduce pin damage. Delmhorst MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Delmhorst 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4".Great for use on roofs, insulation, or EIFS.21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Delmhorst 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order. Delmhorst 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst JX-30 Moisture Meters - Data Sheet Delmhorst JX-30 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jx-30-wood-moisture-meters-p-2050.html Thu, 28 Mar 2024 16:30:03 +0000 USD 2050 Delmhorst 972 JX-30 https://www.abqindustrial.net/store/images/delmhorst-jx-30-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jx-20-wood-moisture-meters-p-2049.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2049 ]]>"Large, custom display with auto backlight – easy to ready under all conditions MC Range – 6%-60% Wood (Douglas Fir) Species - 74 included The Delmhorst JX-20 Moisture Meters is the latest meters in the new Navigator family!Bringing lumber/woodworking, flooring professionals and inspectors two more professional-grade, accurate and versatile tools to address moisture issues and perform your job with complete confidence.The JX-30 features the Delmhorst EDGE™ App with expanded wood species, customizable settings, and the ability to share data from any location. Kit Contents Delmhorst JX-20W/CS Moisture Meters Delmhorst JX-20 Moisture Meters Carrying Case Delmhorst JX-20/P01 Moisture Meters Delmhorst JX-30 Moisture Meters 26-ES hammer electrode extra pins (10x 496, 2x 2498/A-100) Carrying Case Features Large, custom display with auto backlight – easy to ready under all conditions MC Range – 6%-60% Wood (Douglas Fir) Species - 74 included Wood temperature correction (°F/°C) Pins/electrode correction (insulated or non-insulated) Alarm set point - alerts to user-selected MC level On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Internal calibration check “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m Integral contact pins max 5/16” penetration (use 2498/A-100) Compatible with any Delmhorst external electrode. Color-coded LED’s Power – 2x AA batteries – Alkaline Energizer ( incl) QR code on meter for easy access to support materials Size: meter only - 8.65in (2.2mm) x 2.85in (72mm) x 1.55in (39mm); in carry case - 9.5in (241mm) x 6.5in (165mm) x 2.5in (64mm) Weight: meter only - 0.4.5oz (1.3g); in carry case - 18oz (510g) Sturdy plastic carrying case – (incl) 2-year warranty on manufacturer’s defects. Bonus extended warranty with on-line registration. Accessories and Electrodes Delmhorst 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. Delmhorst 2497/A-100 - pack of 24 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst 305RET-0021 - pack of 2 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. Delmhorst 632 - pack of 4 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. Delmhorst A-111- pack of 24 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 7/16" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. Delmhorst HP-1 Makes pilot holes in stucco to reduce pin damage. Delmhorst MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Delmhorst 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4".Great for use on roofs, insulation, or EIFS.21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Delmhorst 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order. Delmhorst 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst JX-20 Moisture Meters - Data Sheet Delmhorst JX-20 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-jx-20-wood-moisture-meters-p-2049.html Thu, 28 Mar 2024 16:29:31 +0000 USD 2049 Delmhorst 984 JX-20 https://www.abqindustrial.net/store/images/delmhorst-jx-20-moisture-meters.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/mstx-tension-meter-with-motorized-take-up-for-setting-sewing-machine-tension-p-2048.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2048 ]]>Tension Meter with Motorized Take-Up for Setting Sewing Machine Tension Range up to 2000 g/cN Memory and USB Output 4 Ranges from 1 - 200 g/cN up to 1 - 2000 g/cN The MSTX Tension Meter with Motorized Take-Up for Setting Sewing Machine Tension is a yarn tension meter with a motorized take-up spool designed for precise measurement and adjusting the tension of sewing machines. A smooth-running motorized spool and strain-gauge sensor allow machine operators to precisely set sewing machine tension thereby achieving the highest quality stitched seams and reducing the number of yarn breaks during production. To control the tension at sewing machines as well as the take-off tension of shuttles. The MSTX model includes many new features such as a backlit auto-rotating LCD display, choice of 3 display Modes (Large Numeric, Bar Graph, and Trend Graph), user-selected damping to minimize tension fluctuations, an internal sampling rate of 1000 Hz allowing you to capture the highest High & Low Peak values, auto-zero setting regardless of the orientation of tension meter, user-set Hi/Lo alarm limits, built-in memory for 60,000 data points with USB output supplied with TensionInspect Software and USB data transfer cable at no additional charge. Kit Contents MSTX Tension Meter with Motorized Take-Up for Setting Sewing Machine Tension Suction cup base/post TensionInspect Software USB cable AC adapter / charger Carrying Case Instruction Manual Features Motorized take-up fixture to have constant speed of the thread 8 meters/min Suction-cup base for positioning the unit on the work plate when tension is measured at the sewing machine Operates from rechargeable Li-Ion battery (includes USB charger) Storage of last, average, MAX MIN, PEAK-MAX, PEAK-MIN values as well as statistical analysis (average value) during a user-selected period User-set Min and Max alarms with indication on LCD if reading is out of limits Memory for 60,000 data points with USB output with sample rates up to 1kHz Five (5) Memory Modes; Statistics Only, Continuous, Fast and On-Demand USB output for batch download or real-time data transfer to TensionInspect Software Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Large, backlight LCD-display with 3 different displays: numeric, numeric with live load bar, numeric with trend graph (time vs. tension) Selectable units of measurement: Grams, cN, Kg, daN, Lbs and Newtons (N) User-adjustable DAMPING is used to minimize tension fluctuations Made in Germany with 1-Year Warranty NIST-Traceable Calibration Certification is optionally available Specifications Accuracy ± 1 % FS* ± 1 Digit (typical ± 0.5 % FS*) Memory for Material Calibration Curves Factory (1), User-Set (3) Calibration Adjustment ± 10 steps in 1 % increments Measuring Units cN, g, N, lb (user-selectable) Over-range Approx. 10 % FS, without accuracy guarantee Overload Protection 200 % full scale Measuring Principle Strain Gauge (full Bridge) Measuring Roller Deflection 0. mm, max Display Type Color Graphic LCD, TFT 128 x 160 pixels Display update time Approx. 2 times per second Display Modes Numeric, Numeric with bargraph, X-Y-diagram (time vs tension) Damping Adjustable electronic damping (averaging) Output signal USB, sample rate 200 Hz (max) Memory 60.000 values in up to 999 measuring periods Memory Modes 5 memory modes with statistical evaluation and PEAK capture Memory Mode S Statistics Only Memory Mode H X-Y Trend Graph Data Memory Mode C Continuous logging over a user set time and max. 999 series of measurement at 2 samples/sec Memory Mode F Same as "C" with sample rate of 200 Hz Memory Mode D Storage of single readings On Demand Vacuum base Adjustable height for measuring position above working plate 120 to 220 mm Temperature Coefficient less than ± 0.01 % FS* /°C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply Li-Ion battery (approx. 2 hr continuous use), charging time approx. 5 hr via AC-Adapter/Charger 100 - 240V AC, plug adapters (EU, USA, UK) Housing Materials Aluminium Housing Dimension 208 x 80 (124) x 106 mm (L x W x H) with Vacuum Base Weight (MSTX/Base) Approx. 840 g / 500 g Ranges Model Measuring Range Calibration Material* Take-Up Speed MST-200 1 - 200 g/cN PA: 0.12 mm Ø 8 meters/min MST-500 1 - 500 g/cN PA: 0.20 mm Ø 8 meters/min MST-1000 1 - 1000 g/cN PA: 0.30 mm Ø 8 meters/min MST-2000 1 - 2000 g/cN PA: 0.50 mm Ø 8 meters/min Related Products MKM Mechanical Tension Meter Motorized Take-up Wheel Designed for setting yarn tension devices Warranty: One Year Downloads MSTX Tension Meter with Motorized Take-Up for Setting Sewing Machine Tension - Data Sheet MSTX Tension Meter with Motorized Take-Up for Setting Sewing Machine Tension - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/mstx-tension-meter-with-motorized-take-up-for-setting-sewing-machine-tension-p-2048.html Fri, 13 May 2022 19:43:28 +0000 USD 2048 Checkline 1000 MSTX https://www.abqindustrial.net/store/images/mstx-tension-meter-with-motorized-take-up-for-setting-sewing-machine-tension.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-rdm-3p-paper-moisture-meter-p-2047.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2047 ]]>Bright, clear digital display Integral contact pins mounted on top of meter provide 5/16” penetration Built-in connector accepts any Delmhorst electrode The Delmhorst RDM-3P Paper Moisture Meter is fully equipped for testing paperboard, corrugated stock, and paper tubes using its paper scale, 0-100 reference scale, and baled paper scale. Whatever the situation calls for, the RDM-3P delivers. Advanced storage and recall features make it easy to organize multiple jobs, or even download data to a PC via the optional linkage software. The paper production industry has a new ally in the reliable and precise RDM-3P! Kit Contents Delmhorst RDM3PW/CS Paper Moisture Meter Delmhorst RDM-3P Paper Moisture Meter Contact Pins Carrying Case Instruction Manual Delmhorst RDM3P/PKG Paper Moisture Meter Delmhorst RDM-3P Paper Moisture Meter PC/KIT software application program Contact Pins Carrying Case Instruction Manual Features Bright, clear digital display Three scales: 5.3%-23% MC for paper 8%-40% MC for baled scrap paper 0 - 100 arbitrary scale for obtaining relative moisture indications on other material Integral contact pins mounted on top of meter provide 5/16” penetration Built-in connector accepts any Delmhorst electrode Audible, adjustable alarm alerts you when your pre-selected MC has been reached Auto-shut off timer saves battery life Store up to 1400 readings with date and time stamp View stored readings on screen Organize readings by job for easy reference Optional software lets you download readings to your computer and generate Excel reports Size: 8 ½” x 3 3/8” x 1 ¾” Weight: 11 oz Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1 year warranty Accessories Delmhorst 2497/A-100 - pack of 24 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst MCS-2 This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST.Please Note: For P-2000 meters with serial numbers up to 19389, please order the MCS-2 For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X. Delmhorst PC/KIT/NAV Enables you to download stored readings from the meter to a PC via infrared linking. This software will enable you to: Export job data to Excel Customize printing options View readings and stats in the application program Save and print individual or group job readings Customize job title View data in Fahrenheit or Celsius Append notes to each job Generate graphical histogram All these features are provided in a easy to use GUI interface, and are compatible with Windows 95/98/ME/2000/XP/Vista/7/8/10.The PC/KIT is included in several of our moisture meter packages, or may be ordered separately. It can be used with the Moisture Check, Navigator Pro, RDM-3, RDM-3P, and Total Check moisture meters. Delmhorst 12-E Double roller type for measuring moisture content on a moving web. Delmhorst 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer. Delmhorst 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order. Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications: Home inspector: Use on wood joists and drywall Paper producer: Use on curved surfaces such as cardboard and paper tubes Woodworker: Use on timber, poles, and veneer 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Delmhorst 43-E Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs. Delmhorst 55-E Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation. Delmhorst 830 Series Prods for testing standard and high density bales (requires H-4 Handle). 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” prod Delmhorst H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing. Downloads Delmhorst RDM-3P Paper Moisture Meter - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-rdm-3p-paper-moisture-meter-p-2047.html Wed, 16 Nov 2022 23:02:48 +0000 USD 2047 Delmhorst 998 RDM-3P https://www.abqindustrial.net/store/images/delmhorst-rdm-3p-moisture-meters.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls206085-positector-gloss-meter-probe-only-p-2046.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2046 ]]> DeFelsko PRBGLS206085 PosiTector Gloss Meter - Probe Only Display Sold Separately Portable gloss measurement for all surface finishes Certificate of Calibration showing traceability to NRC for both the probe Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector GLS Probe PRBGLS206085 Instructions Two (2) year warranty Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls206085-positector-gloss-meter-probe-only-p-2046.html Thu, 15 Jun 2023 22:32:51 +0000 USD 2046 DeFelsko 999 PRBGLS206085 https://www.abqindustrial.net/store/images/defelsko-positector-prbgls206085-probe-only-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls2060-positector-gloss-meter-probe-only-p-2045.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2045 ]]> DeFelsko PRBGLS2060 PosiTector Gloss Meter - Probe Only Display Sold Separately Portable gloss measurement for all surface finishes Certificate of Calibration showing traceability to NRC for both the probe Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector GLS Probe PRBGLS2060 Instructions Two (2) year warranty Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls2060-positector-gloss-meter-probe-only-p-2045.html Thu, 15 Jun 2023 22:32:31 +0000 USD 2045 DeFelsko 1000 PRBGLS2060 https://www.abqindustrial.net/store/images/defelsko-positector-prbgls2060-probe-only-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls60-positector-gloss-meter-probe-only-p-2044.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2044 ]]> DeFelsko PosiTector PRBGLS60 Gloss Meter - Probe Only Display Sold Separately Portable gloss measurement for all surface finishes Certificate of Calibration showing traceability to NRC for both the probe Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector GLS Probe PRBGLS60 Instructions Two (2) year warranty Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-prbgls60-positector-gloss-meter-probe-only-p-2044.html Thu, 15 Jun 2023 22:32:07 +0000 USD 2044 DeFelsko 1000 PRBGLS60 https://www.abqindustrial.net/store/images/defelsko-positector-prbgls60-probe-only-gloss-meter.jpg 70 GU, Measure with: 20°]]> https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls206085-3-positector-advanced-gloss-meter-p-2043.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2043 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Advanced Gage Body BDYAVD-G PosiTector GLS Probe PRBGLS206085 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Advanced Model Features Storage of 250,000 readings in up to 1,000 batches and sub-batches Differential Mode automatically calculates the difference between the current reading and a stored reference value 2 Powerful Scan Modes for quantifying large surfaces Normal – take continuous readings Statistics – take continuous readings and record average, standard deviation, min/max, and number of readings while scanning Live graphing of measurement data Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls206085-3-positector-advanced-gloss-meter-p-2043.html Thu, 15 Jun 2023 22:31:49 +0000 USD 2043 DeFelsko 999 GLS206085-3 https://www.abqindustrial.net/store/images/defelsko-positector-gls206085-3-advanced-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls2060-3-positector-advanced-gloss-meter-p-2042.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2042 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Advanced Gage Body BDYAVD-G PosiTector GLS Probe PRBGLS2060 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Advanced Model Features Storage of 250,000 readings in up to 1,000 batches and sub-batches Differential Mode automatically calculates the difference between the current reading and a stored reference value 2 Powerful Scan Modes for quantifying large surfaces Normal – take continuous readings Statistics – take continuous readings and record average, standard deviation, min/max, and number of readings while scanning Live graphing of measurement data Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls2060-3-positector-advanced-gloss-meter-p-2042.html Thu, 15 Jun 2023 22:31:24 +0000 USD 2042 DeFelsko 1000 GLS2060-3 https://www.abqindustrial.net/store/images/defelsko-positector-gls2060-3-advanced-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls60-3-positector-advanced-gloss-meter-p-2041.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2041 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Advanced Gage Body BDYAVD-G PosiTector GLS Probe PRBGLS60 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Advanced Model Features Storage of 250,000 readings in up to 1,000 batches and sub-batches Differential Mode automatically calculates the difference between the current reading and a stored reference value 2 Powerful Scan Modes for quantifying large surfaces Normal – take continuous readings Statistics – take continuous readings and record average, standard deviation, min/max, and number of readings while scanning Live graphing of measurement data Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls60-3-positector-advanced-gloss-meter-p-2041.html Thu, 15 Jun 2023 22:31:04 +0000 USD 2041 DeFelsko 1000 GLS60-3 https://www.abqindustrial.net/store/images/defelsko-positector-gls60-3-advanced-gloss-meter.jpg 70 GU, Measure with: 20°]]> https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls206085-1-positector-standard-gloss-meter-p-2040.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2040 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Standard Gage Body BDYSTD-G PosiTector GLS Probe PRBGLS206085 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Standard Model Features Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls206085-1-positector-standard-gloss-meter-p-2040.html Thu, 15 Jun 2023 22:30:46 +0000 USD 2040 DeFelsko 1000 GLS206085-1 https://www.abqindustrial.net/store/images/defelsko-positector-gls206085-1-standard-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls2060-1-positector-standard-gloss-meter-p-2039.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2039 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Standard Gage Body BDYSTD-G PosiTector GLS Probe PRBGLS2060 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Standard Model Features Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls2060-1-positector-standard-gloss-meter-p-2039.html Thu, 15 Jun 2023 22:29:47 +0000 USD 2039 DeFelsko 999 GLS2060-1 https://www.abqindustrial.net/store/images/defelsko-positector-gls2060-1-standard-gloss-meter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls60-1-positector-standard-gloss-meter-p-2038.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2038 ]]> Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Portable gloss measurement for all surface finishes Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Automatic Diagnosis and Auto Calibration performed upon power-on using the protective base plate with integrated calibration standard (tile) Fast measurement speeds of 60+ readings per minute 2 Powerful Scan Modes for quantifying large surfaces (Advanced models only) USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Conforms to ASTM C584/D523/D4039, ISO 2813/7668, JIS Z 8741, AS/NZS 1580.602.2 Kit Contents PosiTector Standard Gage Body BDYSTD-G PosiTector GLS Probe PRBGLS60 Protective base plate with integrated calibration standard (tile) 10 cleaning wipes Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard shell case and instructions Two (2) year warranty Features Simple Fast measurement speed - 60+ readings per minute Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable All-metal probe construction for long term stability Weatherproof, dustproof, and water-resistant gage body - IP65-rated enclosure Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits - can be used as Pass/Fail for quick inspection Instant-on feature quickly powers up the gage if recently powered down Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included View pre-formatted reports and .csv data with PosiSoft USB Drive - no software installation required Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Accurate Certificate of Calibration showing traceability to NRC for both the probe and gloss standard included Automatic Diagnosis and Auto Calibration upon power-on using the protective base plate with integrated calibration standard (tile) Store multiple calibration standards (tiles) for quick calibration adjustment Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector probes easily converting to a coating thickness gage, dew point meter, soluble surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable units for each geometry - Gloss and % Reflectance Auto rotating display with Flip Lock Selectable display languages Standard Model Features Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications   20° 60° 85° Measurement Area 10 x 10 mm 10 x 20 mm 4 x 45 mm Measurement Range 0-2,000 GU 0-1,000 GU 0-160 GU Repeatability ±0.2 GU (≤100 GU), ±0.2% (>100 GU) Reproducibility ±0.5 GU (≤100 GU), ±0.5% (>100 GU) Resolution Gloss ±0.1 GU (≤100 GU), ±1 GU (>100 GU) Resolution % Reflectance 0.1% Resolution Haze ±0.1 (≤100), ±1 (>100) Operating Conditions 0° to 45° C (32° to 113° F) - non-condensing Probe Size 165 x 73 x 32 mm (6.5" x 2.875" x 1.25") Probe Weight 555 g (19.6 oz.) Range Gloss Range 60° value Measure with High Gloss > 70 GU 20° Semi Gloss 10 – 70 GU 60° Low/Matte < 10 GU 85° PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector GLS Gloss Meter - Frequently Asked Questions Accessories DeFelsko GLSCLEANKIT Cleaning Kit 10 pack of replacement cleaning wipes for the PosiTector GLS 10 cleaning wipes are included with every PosiTector GLS purchase Downloads DeFelsko PosiTector GLS Gloss Meter - Data Sheet DeFelsko PosiTector GLS Gloss Meter - Instruction Manual DeFelsko PosiTector GLS Gloss Meter - Measuring Gloss DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/defelsko-positector-gls-gloss-meter-c-102_168/defelsko-gls60-1-positector-standard-gloss-meter-p-2038.html Thu, 15 Jun 2023 22:29:19 +0000 USD 2038 DeFelsko 998 GLS60-1 https://www.abqindustrial.net/store/images/defelsko-positector-gls60-1-standard-gloss-meter.jpg 70 GU, Measure with: 20°]]> https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-3015n-portable-xenon-stroboscope-with-rechargeable-battery-p-2037.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2037 ]]> Digital Xenon Stroboscope with Internal Battery Range: 40 - 35,000 RPM/FPM Power: Internal Battery Flash Range: 40-35,000 RPM/FPM The Shimpo DT-3015N Portable Xenon Stroboscope with Rechargeable Battery is a rugged, battery-powered xenon stroboscope designed for non-contact RPM measurement, inspection, and observation of moving parts by "freezing" or "slowing down" the motion. The Shimpo DT-3015N Portable Xenon Stroboscope with Rechargeable Battery provides power flexibility as in addition to its internal rechargeable battery it can operate from AC power. Kit Contents Shimpo DT-3015N Portable Xenon Stroboscope Input signal connector Charger adapter with cable Features Internal, fast-charge rechargeable battery Aluminum construction provides exceptional durability High polish and focused reflector creates a uniform light External trigger allows unit to be automatically synchronized with equipment Light emission auto-off feature from 1 - 120 min enables extended battery operatio Phase shift, set in degrees or ms, allows visual analysis of rotating/reciprocating objects Save up to 5 user configurations to enable switching quickly between machinery Synchronous output enables strobe to drive other strobes Easy tri-pod (optional) or permanent mounting with integral mounting thread Specify IEC-C13-EURO for use with a EURO Type Mains Connection NIST Traceable Calibration Certificate is OPTIONAL Specifications Flashing Range 40.0 - 35,000 fpm (flashes per minute) Accuracy ±0.05 % of reading Resolution 30.0 to 5000.0 : 0.1 fpm; 5001.0 to 8000.0 to 0.2 fpm; 8001.0 to 10000.0 : 0.5 fpm; 10001.0 to 35000.0 : 1.0 fpm Lux Rating 8" (20 cm) Distance = 1950 lx @ 1500 fpm, 2000 lx @ 6000 fpm with 8" (203 mm) irradiation diameter. 20" (50 cm) Distance = 725 lx @ 1500 fpm, 850 lx @ 6000 fpm with 12" (305 mm) irradiation diameter. Lamp Lifetime Typ.1200 hours at 1500 fpm Display 6-digit, 7 segment red LED Flash Duration 30 μsec Phase Shift 0 to 359˚ set by 0.1˚ resolution; 0.00 to 999.99 msec set by 0.01 msec resolution, 1000.0 to 1994.4 msec set by 0.1 msec resolution Power Requirement 100 to 240 VAC 50/60Hz Battery NiMH battery- Approximate 2 hour time to full charge Battery Life Approx. 3 hours (when the emission count is 1500 FPM) Input Signal H level: 2.5 – 12 V; L level: 0 – 0.5 V Pulse width : 50 µs or more Input impedance : 10 kΩ or more Input Signal Range 27 to 35,020 fpm (1 fpm resolution) with available delay setting in degree or msec Sensor Power Supply DC 12 VDC 40 mA Temperature Limits 32 to 104°F (0 to 40°C) Humidity Limits 35 to 85% RH (Non- condensing) Product Weight 4.2 lbs (1.9 kg) Approvals RoHS Warranty 1-Year Related Products QB-LED Battery Powered LED Stroboscope Peak Brightness Of 5,000 40 High Power LEDs produce 5000 Lux Peak Brightness Downloads Shimpo DT-3015N Portable Xenon Stroboscope with Rechargeable Battery - Data Sheet Shimpo DT-3015N Portable Xenon Stroboscope with Rechargeable Battery - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-3015n-portable-xenon-stroboscope-with-rechargeable-battery-p-2037.html Thu, 10 Mar 2022 20:10:45 +0000 USD 2037 Shimpo 995 DT-3015N https://www.abqindustrial.net/store/images/shimpo-dt-3015n-portable-xenon-stroboscope-with-rechargeable-battery.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fzk-flooring-inspector-ez-kit-p-2036.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2036 ]]>4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer and optional external in-situ hygrometer and wood pin probe 8 simple membrane keypad controls Compact Kit For Measuring Relative Humidity and Moisture Content of Concrete and Wood Flooring With Bluetooth and Accompanyning App The Tramex FZK Flooring Inspector EZ Kitis compact kit for instant and precise moisture testing of concrete and wood flooring. The Tramex Tramex CMEX5 Concrete Moisture Encounter X5 digital moisture meter allows for non-destructive quantitative testing of concrete using Gravimetric testing as a baseline and comparative testing per ASTM F2659. The CMEX5 built-in hygrometer measures ambient RH, temperature and dew point conditions. Plug-in reusable Tramex RHIE2 Hygro-i2 Relative Humidity Probe allow for performing ASTM F2170 for relative humidity readings in concrete slabs. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. The Flooring Inspector EZ Kit comes in a Tramex easy-travel case. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your meter screen on your phone when extending to hard-to-reach places. Kit Contents  Tramex CMEX5 Concrete Moisture Encounter X5 Tramex Free App available for Android and iOS Tramex RHIE2 Hygro-i2 Relative Humidity Probe Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins Tramex RHHL Hygro-i Hole Liners and Caps Tramex ALLBAGP Carring Case Features 4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer and optional external in-situ hygrometer and wood pin probe. 8 simple membrane keypad controls. Moisture readings and scale are displayed on a large, clear easy-to-read clear digital display: 2.3" x 1.4" (58mm x 35mm). The built-in Hygrometer probe provides Relative Humidity (RH) readings, temperature, dew point temperature and Humidity Ratio. Wood pin probe mode is automatically selected when the probe is plugged into the Concrete Moisture Encounter X5. When the external Relative Humidity (RH) Hygro-i2 probe is connected to the Concrete Moisture Encounter X5, the instrument automatically switches to RH mode. Ambient or In-Situ Relative Humidity readings, probe temperature, dew point temperature and Humidity Ratio are automatically displayed (Hygrometer Mode). When the battery requires replacement a LOW BATTERY icon is shown on the display. Specifications Kit: Size 13.8" x 9.1" x 3.5" (350mm x 230mm x 90mm) Weight 3.4lbs (1.55kg) Power 2 x AALR6 ALKALINE (included) Tramex CMEX5 Concrete Moisture Encounter X5: Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH +/- 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Related Products Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately  3/4" into the slab Tramex FMK Flooring Master Kit Industry: Flooring Inspection, Flooring Installation. Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Downloads Tramex FZK Flooring Inspector EZ Kit - Data Sheet Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fzk-flooring-inspector-ez-kit-p-2036.html Mon, 21 Nov 2022 10:44:37 +0000 USD 2036 Tramex 998 FZK https://www.abqindustrial.net/store/images/tramex-fzk-flooring-inspector-ez-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-iqcpk-flooring-installation-quick-check-plus-kit-p-2035.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2035 ]]>Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install Non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation Compact Kit for performing the Tramex Installation Quick Check for Concrete Moisture Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install The Tramex IQCPK Flooring Installation Quick Check Plus Kit is a compact kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation. Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The CMEX5 has a built-in hygrometer providing ambient relative humidity, temperature and dew-point measurements. The Infrared Thermometer provides surface temperature readings for comparison with the dew-point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Plus Kit comes in a Tramex Easy-travel case. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex IRT2 Infrared Surface Thermometer Free App available for Android and iOS (phone not included) Carring Case Specifications Kit: Size 13.8” x 9.1” x 3.5” (35cm x 23cm x 90cm) Weight 2.8lbs (1.3kg) Power 2 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH +/- 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex IRT2 Infrared Surface Thermometer Temperature Measurement Range -58° to 1202°F ( -50° to 650°C ) Temperature Measurement Accuracy +/- 4°F/C or +/- 2% of reading >32°F (0°C) | +/- 3°F/C or +/- 3% of reading Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-iqcpk-flooring-installation-quick-check-plus-kit-p-2035.html Wed, 31 Jan 2024 16:25:53 +0000 USD 2035 Tramex 1000 IQCPK https://www.abqindustrial.net/store/images/tramex-iqcpk-flooring-installation-quick-check-plus.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-iqck-flooring-installation-quick-check-kit-p-2034.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2034 ]]>Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install Non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation Compact Kit for performing the Tramex Installation Quick Check for Concrete Moisture Avoid Moisture Related Floor Failures with this Quick Check Procedure at Time of Install The Tramex IQCK Flooring Installation Quick Check Kit is a compact kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation. Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector provides surface temperature readings and ambient temperature and dew point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Kit comes in a Tramex Easy-travel case. Kit Contents Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector Free App available for Android and iOS (phone not included) Carring Case Specifications Kit: Size 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm) Weight 2.8lbs (1.3kg) Power 2 x AA batteries, 1 x 9 volt PP3 battery Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector: Temperature Range -58ºF to 716ºF (50ºC to 380ºC) Display resolution 0.1 Emissivity Fixed at 0.95 Temperature accuracy -58º to 32ºF / -50º to 20ºC: +/- 32º to 716ºF / 3.5ºC 20º to 380 ºC: +/-1.5ºC Wavelength range 8 – 14um Humidity Range 0 - 100% RH Humidity accuracy +/-3.5% (20% to 80%) Dew point temperature (-22 to 212)ºF / (-30 to 100)ºC D:S 20:1 Operating temp 32 to 122ºF (0 to 50ºC) Storage temp -4 to 140ºF  (-10 to 60ºC) Relative humidity 10%-90%RH operating, Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-iqck-flooring-installation-quick-check-kit-p-2034.html Wed, 31 Jan 2024 16:23:09 +0000 USD 2034 Tramex 1000 IQCK https://www.abqindustrial.net/store/images/tramex-iqck-flooring-installation-quick-check-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhie2-electronic-interface-cable-p-2033.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2033 ]]>Electronic Interface Cable for Tramex Hygro-i Probes Fast Acclimation and Temperature response time. Proven robustness, Durable and Reusable. Electronic Interface Cable for Tramex Hygro-i Probes The Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring and walls as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & BS 8201,8203, 5325. Kit Contents Tramex RHIE2 Electronic Interface Cable Features The RHIE2 Electronic Interface cable connects the Tramex Hygro-i Hole Liners and Caps & Tramex Hygro-i2 Relative Humidity Probe to Tramex MRH III Moisture and Humidity Meter (Product Order Code: RHIE2) The RHIE2B Electronic Interface cable connects the Tramex Hygro-i Hole Liners and Caps & Tramex Hygro-i2 Relative Humidity Probe to the Tramex DL-RHTX Feedback DataLogger and the Tramex CMEX5 Concrete Moisture Encounter X5 (Product Order Code: RHIE2B). Related Products Tramex FBSK5.1 Feedback Datalogger Starter Kit Bluetooth BLE enabled for use with mobile devices With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Display Digital Tramex MRH III Moisture and Humidity Meter Moisture testing of wood, drywall, masonry, roofing and other construction materials Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface Tramex Hygro-i2 Relative Humidity Probe The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with ASTM F2170 for the flooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals Downloads Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhie2-electronic-interface-cable-p-2033.html Thu, 07 Dec 2023 23:37:55 +0000 USD 2033 Tramex 999 RHIE2 https://www.abqindustrial.net/store/images/tramex-rhie2-electronic-interface-cable.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-snw-short-narrow-wand-relative-humidity-probe-p-2032.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2032 ]]>5" (127mm) Long Probe for Deep Cavity Inspection. Fast Acclimation and Temperature response time. Proven robustness, Durable and Reusable. 5" Short, Narrow Relative Humidity Sensor Ideal for Measuring in samll Crevices and in Between Tiles The Tramex 5" (127mm) Short Narrow Wand Relative Humidity Probe has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope. The probe measures Relative Humidity, Temperature, Dew Point temperature and grains per pound (grams per kilo) humidity ratio. This thin probe is ideal for use by Flood and Water Damage Restoration as well as Building Survey professionals. The Tramex Relative Humidity Probes are the most advanced, resilient and re-usable RH probes on the market today, allowing the user to evaluate moisture conditions within the building structure and can be used with Tramex digital meters and DataLoggers. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. Used in conjunction with the Tramex CMEX5 Concrete Moisture Encounter X5,Tramex MRH III Moisture and Humidity Meter, non-destructive moisture meters or the Tramex DL-RHTX Feedback DataLogger, the probes provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display. The probes are reusable and calibration checks can be carried out using the calibration check salts. Kit Contents Tramex RHP-SNW Short Narrow Wand Relative Humidity Probe Features 5" (127mm) Long Probe for Deep Cavity Inspection. Fast Acclimation and Temperature response time. Proven robustness, Durable and Reusable. Best in class accuracy and reliable, even at high RH >90%. Measures giving in situ relative humidity and ambient RH, temperature,  dew point temperature & grains per pound. Relative Humidity range:  0% to 100% Temperature Range:  -40°C to 80°C (-40°F to 176°F)  Best temperature accuracy of +/-0ºC to 90 ºC (2º over 32ºF to 194ºF) Specifications Range 0 → 100%RH Accuracy 0% → 99%RH ±2.0%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-snw-short-narrow-wand-relative-humidity-probe-p-2032.html Thu, 07 Dec 2023 23:31:18 +0000 USD 2032 Tramex 1000 RHP-SNW https://www.abqindustrial.net/store/images/tramex-rhp-snw-short-narrow-wand-relative-humidity-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-sw-relative-humidity-probes-p-2031.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2031 ]]> Fast Acclimation and Temperature response time Proven robustness, Durable and Reusable Best in class accuracy and reliable, even at high RH >90% Tramex 4.5" (110mm) Relative Humidity Sensor Reusable Ambient RH-PROBE for use within Building Structure The Tramex RHP-SW Relative Humidity Probes is the most advanced, resilient and re-usable RH probe on the market today, allowing the user to evaluate moisture conditions within the building structure. The different lengths and thicknesses make them ideal for use by Flood andWater Damage Restoration as well as BuildingSurvey professionals. The probes, which house the latest Hygro-i2 technology, measure Relative Humidity, Temperature, Dewpoint temperature and grains per pound humidity ratio. The probes can be used for the evaluation of moisture conditions of wall and cavity structures as well as ambient air conditionswithin the building envelope. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probebrings reliability and peace of mind to a whole new level. Used in conjunction with the Tramex CMEX5 Concrete Moisture Encounter X5,Tramex MRH III Moisture and Humidity Meter, non-destructive moisture meters or the Tramex DL-RHTX Feedback DataLogger, the probes provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display. The probes are reusable and calibration checks can be carried out using the calibration check salts. Kit Contents Tramex RHP-SW Relative Humidity Probes Features Fast Acclimation and Temperature response time Proven robustness, Durable and Reusable Best in class accuracy and reliable, even at high RH >90% Measures giving in situ relative humidity and ambient RH, temperature,  dew point temperature & grains per pound Relative Humidity range:  0% to 100% Temperature Range:  -40°F to 176°F (-40°C to 80°C) Best temperature accuracy of +/-2° over 32°F to 194°F (0°C to 90 °C) Specifications Range 0 → 100%RH Accuracy 0% → 99%RH ±2.0%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-sw-relative-humidity-probes-p-2031.html Thu, 07 Dec 2023 23:34:49 +0000 USD 2031 Tramex 999 RHP-SW https://www.abqindustrial.net/store/images/tramex-rhp-sw-tramex-relative-humidity-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-nw-narrow-wand-relative-humidity-probe-p-2030.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2030 ]]> 10" (260mm) Long Probe for Deep Cavity Inspection Fast Acclimation and Temperature response time Proven robustness, Durable and Reusable 10" Long, Narrow Relative Humidity Sensor Ideal for Measuring in Small Crevices and in Between Tiles The Tramex 10" (260mm) Narrow Wand Relative Humidity Probe has a 4mm diameter and is ideal for taking Relative Humidity Readings in small or narrow crevices, in between tiles, and for the evaluation of moisture conditions of wall and cavity structures within the building envelope. The probe measures Relative Humidity, Temperature, Dew Point temperature and grains per pound (grams per kilo) humidity ratio. This thin probe is ideal for use by Flood and Water Damage Restoration as well as Building Survey professionals. The Tramex Relative Humidity Probes are the most advanced, resilient and re-usable RH probes on the market today, allowing the user to evaluate moisture conditions within the building structure and can be used with Tramex digital meters and DataLoggers. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. Used in conjunction with the Tramex CMEX5 Concrete Moisture Encounter X5,Tramex MRH III Moisture and Humidity Meter, non-destructive moisture meters or the Tramex DL-RHTX Feedback DataLogger, the probes provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display. The probes are reusable and calibration checks can be carried out using the calibration check salts. Kit Contents Tramex RHP-NW Narrow Wand Relative Humidity Probe Features 10" (260mm) Long Probe for Deep Cavity Inspection Fast Acclimation and Temperature response time Proven robustness, Durable and Reusable Best in class accuracy and reliable, even at high RH >90% Measures giving in situ relative humidity and ambient RH, temperature,dew point temperature & grains per pound Relative Humidity range:0% to 100% Temperature Range:-40°C to 80°C (-40°F to 176°F) Best temperature accuracy of +/-0°C to 90 °C (2° over 32°F to 194°F) Specifications Range 0 → 100%RH Accuracy 0% → 99%RH ±2.0%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-rhp-nw-narrow-wand-relative-humidity-probe-p-2030.html Thu, 07 Dec 2023 23:30:07 +0000 USD 2030 Tramex 1000 RHP-NW https://www.abqindustrial.net/store/images/tramex-rhp-nw-narrow-wand-relative-humidity-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-hi-ex-hygro-i2-insertion-retrieval-tool-p-2029.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2029 ]]>used to insert and retrieve the Tramex Hygro-i2 Relative Humidity Probe or Tramex Hygro-i Hole Liners and Caps 2 Models The Tramex HYGRO-I2 Insertion / Retrieval Tool is used to insert and retrieve the Tramex Hygro-i2 Relative Humidity Probe into the hole liner. Kit Contents Tramex HI-EX/L HYGRO-I2 Insertion / Retrieval Tool Features Tramex HI-EX HYGRO-I2 Insertion / Retrieval Tool, length: 2.7" (65mm) for use with Tramex Hygro-i Hole Liners and Caps Tramex HI-EXL HYGRO-I2 Insertion / Retrieval Tool, length: 4.8" (120mm) for use with Tramex Hygro-i2 Relative Humidity Probe Specifications Temperature Range -58ºF to 716ºF (50ºC to 380ºC) Display resolution 0.1 Emissivity Fixed at 0.95 Temperature accuracy -58º to 32ºF / -50º to 20ºC: +/- 32º to 716ºF / 3.5ºC 20º to 380 ºC: +/-1.5ºC Wavelength range 8 – 14um Humidity Range 0 - 100% RH Humidity accuracy +/-3.5% (20% to 80%) Dew point temperature (-22 to 212)ºF / (-30 to 100)ºC D:S 20:1 Operating temp 32 to 122ºF (0 to 50ºC) Storage temp -4 to 140ºF  (-10 to 60ºC) Relative humidity 10%-90%RH operating, Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-hi-ex-hygro-i2-insertion-retrieval-tool-p-2029.html Thu, 07 Dec 2023 23:42:39 +0000 USD 2029 Tramex 1000 HI-EX https://www.abqindustrial.net/store/images/tramex-hygro-i2-insertion-retrieval-tool.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-irt2dp-infrared-surface-thermometer-and-dew-point-detector-p-2028.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2028 ]]>Rapid detection function Precise non-contact measurements Dual laser targeting The Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector is a handheld dual laser, non-contact Infrared Thermometer and Dew Point detector with tricolor light (and audible) indication as reading goes close to dew point temperature. It is used to measure and display ambient and surface temperature, relative humidity & dew point temperature. Kit Contents Tramex IRT2DP Infrared Surface Thermometer And Dew Point Detector Power Supply 9V battery, NEDA 1604A or IEC 6LR61, or equivalent Features Rapid detection function Precise non-contact measurements Dual laser targeting 3 Mode display- Humidity / Dew Point Temperature / Ambient Temperature Green- Yellow – Red LED light and audible signal indicate proximity to Dew Point Temperature Automatic Data Hold User selectable ºC or ºF Pre-set Emissivity of 0.95 Backlight LCD display Unique flat surface, modern housing design Specifications Temperature Range -58ºF to 716ºF (50ºC to 380ºC) Display resolution 0.1 Emissivity Fixed at 0.95 Temperature accuracy -58º to 32ºF / -50º to 20ºC: +/- 32º to 716ºF / 3.5ºC 20º to 380 ºC: +/-1.5ºC Wavelength range 8 – 14um Humidity Range 0 - 100% RH Humidity accuracy +/-3.5% (20% to 80%) Dew point temperature (-22 to 212)ºF / (-30 to 100)ºC D:S 20:1 Operating temp 32 to 122ºF (0 to 50ºC) Storage temp -4 to 140ºF  (-10 to 60ºC) Relative humidity 10%-90%RH operating, Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-irt2dp-infrared-surface-thermometer-and-dew-point-detector-p-2028.html Wed, 31 Jan 2024 16:18:43 +0000 USD 2028 Tramex 994 IRT2DP https://www.abqindustrial.net/store/images/tramex-irt2dp-infrared-surface-thermometer-and-dew-point-detector.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-dl-rhtx-feedback-datalogger-p-2027.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2027 ]]>Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries. Instant set up and start modes. Precise Ambient Relative Humidity and Temperature logging. Wireless Humidity and Temperature Sensor Create Visual Moisture Maps and Reports with Tramex Meter App The Tramex DL-RHTX Feedback DataLogger and Tramex Meters App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualise Live Readings, Thermal Conditions and Psychrometric Charts as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Meters App and a compatible iOS or Android mobile device. Using the optional plug-in Hygro-i2 RH probes, the DL-RHTX will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces. Kit Contents Tramex DL-RHTX Feedback DataLogger Wall Mounting and Tripod Stand Tramex Free App available for Android and iOS Features Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries. Instant set up and start modes. Precise Ambient Relative Humidity and Temperature logging. Used to perform BS 8201, 8203, 5325 and ASTM F2170. Intuitive and instructive App interface. Adjustable Interactive chart, spreadsheet, report and easy export functions. Connectivity up to 165ft(50m) for highly accessible data downloads. Ambient Relative Humidity, Temperature, Dew point, Grains per pound. Psychrometric chart showing Relative Humidity, Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point. Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional Contact Temperature Probe) Specifications Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Related Products Tramex FMK Flooring Master Kit Industry: Flooring Inspection, Flooring Installation Tramex FTK Flooring Tech Kit desc Tramex WDIK Water Damage Restoration Inspector Kit Industry: Water Damage Restoration Tramex WDMK Water Damage Restoration Master Kit Industry: Water Damage Restoration Downloads Tramex DL-RHTX Feedback DataLogger - Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-dl-rhtx-feedback-datalogger-p-2027.html Wed, 31 Jan 2024 16:17:58 +0000 USD 2027 Tramex 1000 DL-RHTX https://www.abqindustrial.net/store/images/tramex-dl-rhtx-feedback-datalogger.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-meter-ca-11c-bovine-blood-calcium-meter-3200772940-p-2025.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2025 ]]> 2 calibration points Auto standard recognition Auto hold / auto stable measurement Milk fever, or Sub Clinical Hypocalcemia (SCH) is a significant problem with dairy cows. Total calcium levels in the cows’ blood drop after lactation. By measuring the ionized calcium levels of the blood directly cow side, the treatment can start sooner and is more effective. The new LAQUAtwin CA-11C has been specially developed for cow side measurement of ionized calcium in blood. Ionized calcium reflects more accurately the current calcemic blood situation compared to total blood calcium as it equals the free available calcium ions. Kit Contents Horiba LAQUATwin meter Ca-11C bovine blood Calcium meter# 3200772940 Sensor S051 2 - Batteries (CR2032) 2 - Y052L (1.25 mmol/L) 25 mL bottles 2 - Y052H (2.50 mmol/L) 25 mL bottles 3 - #251 Cleaning solution, 250 mL bottles Wash bottle for cleaning solution Instruction Manual Quick Manual Carrying case Features Minimum sample volume: 0.3ml 2 calibration points Auto standard recognition Temperature calibration: 5 to 40.0 ºC Auto hold / auto stable measurement Auto power off: 30 mins. Low battery indicator IP67 Rating dust & waterproof Replaceable sensor Material: ABS epoxy Display: custom (monochrome) digital LCD with backlight Operating conditions: 5 to 40 ºC, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Supplied with accessories (see specifications for more details) Specifications Measurement Principle Ion Selective Electrode Minimum Sample Volume 0.3 ml Measurement Range 0.1～5.0 mmol/L Resolution 0.1 mmol/L Accuracy ±20% of reading value Calibration Points 2 points （1.25 mmol/L and 2.50 mmol/L） Display Custom (monochrome) digital LCD with backlight  Operating Temperature 5 to 40.0 ºC Operating Humidity 85% or less relative humidity (no condensation) Power CR2032 batteries (2) Material ABS epoxy Dimensions 164 x 29 x 20 mm (excluding projections) Mass Approx. 55 g (including sensor and batteries) Functions Auto Standard Recognition Auto Hold / Auto Stable Measurement Automatic Power Off (30mins) Low Battery Indicator IP67 Dust / Waterproof Replaceable Sensor Downloads Horiba LAQUAtwin iCa-11C Compact Ionized Calcium Ion Meter - Data Sheet Horiba LAQUAtwin iCa-11C Compact Ionized Calcium Ion Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laquatwin-compact-meters-c-104_73/horiba-laquatwin-meter-ca-11c-bovine-blood-calcium-meter-3200772940-p-2025.html Mon, 25 Mar 2024 16:02:51 +0000 USD 2025 Horiba 977 iCa-11C https://www.abqindustrial.net/store/images/horiba-laquatwin-ica-11c-compact-ionized-calcium-ion-meter.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-lp-5c-low-profile-cable-type-permanent-magnet-yoke-p-2024.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2024 ]]> The Western Instruments LP-5C Low Profile Cable Type Permanent Magnet Yoke (Flex Mag) Designed so that you can achieve easier and more reliable contact to provide stress crack detection in any direction The Western Instruments LP-5C Low Profile Cable Type Permanent Magnet Yoke (Flex Mag) is a low profile cable type permanent magnet yoke, for confined and complex workplaces, that can lift 50lbs and has been tested up to 85lbs. The Flex Mag weighs only 490g (21oz), but its only 8cm (3¼") high so it is compact and easy to carry. The Western Instruments LP-5C Low Profile Cable Type Permanent Magnet Yoke is designed so that you can achieve easier and more reliable contact to provide stress crack detection in any direction. Flex Mag is versatile and can test for stress fractures in metal without the use of electricity. For you welders the Flex Mag allows you to test your welds for defects anywhere you may be working. When doing inspections or checking welds, you can use the Flex Mag with our Basic Dry Method Kit or our Wet Method Kit to accurately see any stress fractures or cracks. The flux cable gives flexibility of the pole pieces for complex geometries. The inspector can space the pole from 1¾" to 6" or more. The Flex Mag’s unique design makes your inspections easier, effective and reliable. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-lp-5c-low-profile-cable-type-permanent-magnet-yoke-p-2024.html Tue, 20 Feb 2024 15:21:13 +0000 USD 2024 Western Instruments 997 LP-5C https://www.abqindustrial.net/store/images/western-instruments-lp-5c-low-profile-cable-type-permanent-magnet-yoke.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-laser-speed-sensors-with-npn-pulse-p-2023.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2023 ]]> Laser Speed Sensors with NPN Pulse Output Operating frequency up to 250,000 rpm The Compact MiniVLS 111 Laser Speed Sensors with NPN Pulse is primarily designed for speed related applications, including very high speed monitoring. These high quality Sensors are housed in rugged stainless steel enclosures which are sealed to IP67 standard. They are engineered for easy mounting in either a proximity Sensor style housing or Plain version with grooved body which is designed to be used either hand held or with an optional mounting bracket which can be tripod mounted or fixed to a machine surface. They can be used with almost any pulse input monitoring equipment such as Digital Tachometers, Counters & rotation monitoring products, data collectors, including portable, panel mounted and bench style instruments. They are also compatible with most Condition Monitoring products. Automotive Applications Widely used for research & development and test applications. Condition Monitoring Application Ideal for phase & speed monitoring balancing applications on rotating machinery. Optical Ranges Laser models measure at up 2 metres with reflective tape or longer with retro-reflectors or special configurations. Features Operating frequency up to 250,000 rpm Long optical range up to 2 metres Wide angle of operation - up to 80° On Target indicator standard Integral Connector Stainless Steel housing Threaded or Plain housing options Reverse polarity & short circuit protected Specifications Laser Optical Range 100 - 200mm Laser Angle of Incidence ± 80° Speed Range 0.1 - 250,000rpm Power Input 5vdc or 8-24vdc @ 30 mA typically Operating Temp -10 - +40°C IP Rating IP67 Housing Types M20 threaded or Plain body + fixing slots Material Stainless Steel Connections Integral Connector Cables Several Options Dimensions Laser - D 20mm x L 70mm Output NPN Pulse Downloads MiniVLS Laser Speed Sensors with NPN Pulse Output - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-laser-speed-sensors-with-npn-pulse-p-2023.html Thu, 15 Jun 2023 19:05:35 +0000 USD 2023 Compact 1000 MiniVLS https://www.abqindustrial.net/store/images/minivls-laser-speed-sensors-with-npn-pulse.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-kt-ketos-ring-p-2021.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2021 ]]> Western Instruments W-KTKetos Ring Use to evaluate the performance of Wet Method Bath on a powerful DC Field The Western Instruments W-KTKetos Ring is intended to be use to evaluate the performance of Wet Method Bath on a powerful DC Field. Not particularly practical for portable inspection applications, but is a widely accepted test standard. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-kt-ketos-ring-p-2021.html Tue, 20 Feb 2024 15:21:36 +0000 USD 2021 Western Instruments 1000 W-KT https://www.abqindustrial.net/store/images/western-instruments-w-kt-ketos-ring.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-mtu-test-piece-p-2020.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2020 ]]>Used to test the sensitivity of Wet Method Baths (MPI Suspensions) A reference picture and description of the bath The Western Instruments MTUTest Piece No. 3 is used to test the sensitivity of Wet Method Baths (MPI Suspensions).A reference picture and description of the bath, accompany the Certification for this Test Piece, so an existing or new Bath can be compared to indications from an optimum system.These blocks can be used for Wet Fluorescent or Visible Baths (with White Contrast Paint). The 9934-2, Type 1 is a disk, 50 mm in diameter by 11 mm thick, with a 10.5 mm hole through the center.The Serial Number is engraved onto the outside edge of the disk.There are 2 types of cracks induced onto the surface; Grinding (or Course Cracks), and Stress (Induced by quenching).The surface of the Test Piece is ground, with a Black Conversion Coating which permits damage to be easily seen.The Test Pieces are magnetized with a Central Conductor at 1000 Amps DC. Western Instruments MTUTest Piece also manufacture a Test Piece C (similar to a Ketos Ring), and a Test Piece D (a 300 x 50 x 25 mm Block, with 8 side drilled holes at various depths).Western Instruments MTUTest Piece Blocks can be re-certified, when necessary, by an authorized agency. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-mtu-test-piece-p-2020.html Tue, 20 Feb 2024 15:21:34 +0000 USD 2020 Western Instruments 1000 MTU https://www.abqindustrial.net/store/images/western-instruments-mtu-test-piece.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-cc-fluorescent-crack-comparators-p-2019.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2019 ]]> Western Instruments W-CC Fluorescent Crack Comparators Manufactured to meet ASTM requirements for Wet Visible or Wet Fluorescent Baths The Western Instruments W-CC Fluorescent Crack Comparators is 2 different models of Fluorescent Crack Measurement Scales. These Scales are available in Metric (W-CC-M) or Imperial (W-CC-I ) measurement references. These scales are used during Wet Fluorescent Magnetic Particle Inspection to allow the inspector to easily read the length of Indications, by comparing them to the printed scales. The measurements and length comparators are printed in a Green Fluorescent material, so the measurements are easily viewed under Black Light, any other color could be masked by the long wave UV-A Light. W-CC’s are far easier to use than a ruler under UV-A, as inspectors usually use Stainless Steel Rules with Black text. Other types of Crack Comparators are offered and manufactured by others, but they don’t typically apply to the inspection Scope of our Customers. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-cc-fluorescent-crack-comparators-p-2019.html Tue, 20 Feb 2024 15:21:32 +0000 USD 2019 Western Instruments 1000 W-CC https://www.abqindustrial.net/store/images/western-instruments-w-cc-fluorescent-crack-comparators.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-ct-centrifuge-tube-p-2018.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2018 ]]> Western Instruments W-CT Centrifuge Tube Manufactured to meet ASTM requirements for Wet Visible or Wet Fluorescent Baths The Western Instruments W-CT Centrifuge Tube for settling tests. This Western Instruments W-CT Centrifuge Tube is manufactured to meet ASTM requirements for Wet Visible or Wet Fluorescent Baths. Most reliable method for verifying Bath Concentrations and Cleanliness. Also available with Western’s unique stand (as shown here). Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-ct-centrifuge-tube-p-2018.html Tue, 20 Feb 2024 15:21:30 +0000 USD 2018 Western Instruments 1000 W-CT https://www.abqindustrial.net/store/images/western-instruments-w-ct-centrifuge-tube.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pg-pie-gauge-p-2017.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2017 ]]> Specifically addressed in the BS 6072 Specification Used to check if an induced field will detect a certain orientation (direction) of defect The Western Instruments W-PG Pie Gauge is used to measure Magnetic Field Direction, and unfortunately it is often used to ensure the presents of an adequate magnetic field.  Outside North America, the Pie Gauge is often referred to as an ASME Magnetic Field Indicator.  The design dates to the earliest versions of industry specifications, and is still outlined in ASME, ASTM, and EN versions.  The Pie Gauge is very robust, but due to the size (thickness), it is not that effective as a representative of artificial defects.  A QQI (CX type) is far superior to a Pie Gauge and even a Castrol Strip can be used to measure field direction.  The overall thickness of the octagon disk is approximately 3mm (0.125"), with it's copper backing plate being almost a third of its thickness.  While the magnetic side (low carbon steel) is placed on the workpiece, it means the separation of the 8 pie segments are well off the workpiece.  Where a QQI or Castrol Strip is flexible and virtually conforms to the workpiece, the field on a Pie Gauge must extend though its copper backing.   With all Flux Sharing Devices, intimate contact with the surface is absolutely necessary.  It is recognized that Pie Gauges are most suited to Dry Method Inspection, and to be used on fairly flat surfaces.    Western Instruments W-PG Pie Gauge are supplied with a vinyl storage sheath and a Certificate of Conformance.  The Western Instruments W-PG Pie Gauge can be re-certified, when necessary, by an authorized agency, however this is only required when there are signs of physical damage. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pg-pie-gauge-p-2017.html Tue, 20 Feb 2024 15:21:27 +0000 USD 2017 Western Instruments 999 W-PG https://www.abqindustrial.net/store/images/western-instruments-w-pg-pie-gauge.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-castrol-strips-flexible-magnetic-flux-indicators-p-2016.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2016 ]]> Specifically addressed in the BS 6072 Specification Used to check if an induced field will detect a certain orientation (direction) of defect The Western Instruments Castrol Strips Flexible Magnetic Flux Indicators is specifically addressed in the BS 6072 Specification, Western Instruments Castrol Strips Flexible Magnetic Flux Indicators are used to check if an induced field will detect a certain orientation (direction) of defect, and to determine the sensitivity or size of a detectable defect. Western Instruments Castrol Strips Flexible Magnetic Flux Indicators are more robust than QQI's, as they are over 3 times thicker. Therefore, Castrol Strips are very suitable for use in the field or factory floor, by a Technician to check his defect sensitivity.  While Castrol Strips can be used for procedure development they are far more suited to repeated use.  Furthermore, Type G Castrol Strips are the best suited for field operations, while Type A are more similar to QQI's with the disadvantage of not being as flexible. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-castrol-strips-flexible-magnetic-flux-indicators-p-2016.html Tue, 20 Feb 2024 15:21:25 +0000 USD 2016 Western Instruments 1000 Castrol Strips https://www.abqindustrial.net/store/images/western-instruments-castrol-strips-flexible-magnetic-flux-indicators.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-qqi-s-quantitative-quality-indicators-p-2015.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2015 ]]> Artificially flawed low carbon steel specimens that are used in magnetic particle inspection (MPI) Are nominally ¾" square The Western Instruments QQI’s Quantitative Quality Indicators is artificially flawed low carbon steel specimens that are used in magnetic particle inspection (MPI).They are used to establish, and assuring, the proper magnetic field is achieved to produce indications of flaws in ferromagnetic parts.It must be emphasized that Western Instruments QQI’s Quantitative Quality Indicators are themselves flawed parts, so that when they are placed in an appropriatemagnetic field, indications will appear when magnetic particles are applied. Western Instruments QQI’s Quantitative Quality Indicators are manufactured strictly in accordance with applicable AMS specification. All Western Instruments QQI’s Quantitative Quality Indicators are nominally ¾" square. The miniature configuration (CM-230) are intended to be cut into individual specimens for application in small radii and tight places. The 3 concentric circles, have depths of 40% in the inner circle, 30%, 20% on the outer circle. Use of the 3 Circle types will effectively pinpoint applicable current density to produce optimal indications. The typical 30% depth of indications. on all other Western Instruments QQI’s Quantitative Quality Indicators. is usually sufficient to indicate a Hall Effect Gauss Meter reading of 30 when such a reading is required by specification. The hermetically sealed package should be left in place until ready for use. The low carbon steel (AISI 1005) will readily corrode in typical plant or laboratory environments.All QQI’s are coated with an inert material, approximately 0.005 mm thick, that should be removed before application. The coating appears to have a pinkish cast under black light, but will not interfere with indications forming. It is strongly recommended that once opened QQI’s be stored in a solvent, such as isopropyl Alcohol.If being applied to a workpiece with Anaerobic Adhesive (Super / Crazy Glue), both the part and QQI must be clean and dry before application. The Western Instruments QQI’s Quantitative Quality Indicators selected must be placed in intimate contact with and flaw side next to the part to be evaluated.QQI’s must be securely fastened, on all four sides, so that inspection media can not gain access in the bond line.A part, with affixed QQI’s’, can be used for process control for monitoring adequate light, contrast, bath concentration, and other inspectionattributes. For singular and repetitive use, a single-sided cellophane tape applied to all four sides of the QQI. This tape should have the following properties; good adhesion to steel,impervious to the bath carrier being used, clear and non-fluorescent, and readily available in ¼” or ½” widths.Suggested tapes are; Scotch brand 191, 471, or 600 series.Should the tape become loose, allowing particles and bath to enter the QQI should be carefully removed. The back of the QQI and the part surface should be thoroughly cleaned and the QQI re-applied. The circle and cross configuration will indicate fields in any direction if all other requirements are met. Particle content meeting AMS specifications must be between 0.15mm and 0.25mm in a Centrifuge Tube, and the UV light level at 2500 mw/cm² on thesurface. The flaw depth is maintained to a tolerance of Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-qqi-s-quantitative-quality-indicators-p-2015.html Sun, 07 Jul 2024 15:11:35 +0000 USD 2015 Western Instruments 981 QQIS https://www.abqindustrial.net/store/images/western-instruments-qqis-quantitative-quality-indicators.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pb-powder-bulb-p-2014.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2014 ]]> Dry Method Magnetic Particles Manufactured with Silicon Rubber The Western Instruments W-PB Powder Bulb Dry Method Magnetic Particles is applied by the inspector with a Powder Bulb.Western’s W-PB has been custom designed for this application.This is the best development in Dry MPI Powder Application in 20 years! Western Instruments W-PB Powder Bulb has an easy to remove rolled aluminum end cap with an extra large mouth to easily fill with powder.The W-PB-4 is equipped with an adjustable magnet for overhead work. Western Instruments W-PB Powder Bulb is manufactured with Silicon Rubber, so its characteristics are not affected by cold or hot weather.The Silicon Rubber will not harden with age, or crack due to age or cold weather. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pb-powder-bulb-p-2014.html Tue, 20 Feb 2024 15:21:21 +0000 USD 2014 Western Instruments 997 W-PB https://www.abqindustrial.net/store/images/western-instruments-w-pb-4-powder-bulb.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-spr-365-uv-inspection-kit-p-2013.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2013 ]]> Western Instruments SPR-365 UV Inspection Kit Western Instruments SPR-365 UV Inspection Kit Kit Contents LED Flashlight (w/Battery) Nylon Pouch Spare Battery Battery Charger with 12VDC and 115 / 230 VAC Adaptors Spot and Diffusing Reflectors UV Protective Spectacles Calibration Certificate Instruction Manual Carrying Case Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-spr-365-uv-inspection-kit-p-2013.html Tue, 20 Feb 2024 15:21:19 +0000 USD 2013 Western Instruments 1000 SPR-365 https://www.abqindustrial.net/store/images/western-instruments-spr-365-uv-inspection-kit.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pt-pull-test-bars-p-2012.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2012 ]]> Used to verify the performance of a Yoke Furthermore each bar has a Pole Spacing Scale (Imperial and Metric) The Western Instruments W-PT Pull Test Bars is used to verify the performance of a Yoke.  Each W-PT is traceable to NIST, and supplied with a Certificate of Compliance to; ASTM-E1444; E709; and ASME Section V, Article 7.  Each Bar is equipped with; a Machined Groove, to ensure the Yoke Legs are centered laterally; a hole in the center to permit multiple bars to be fastened together; as well as a Serial Number for tractability.  Furthermore each bar has a Pole Spacing Scale (Imperial and Metric) affixed to one side, as most specifications now include Pole Distance and Weight for Calibrating Yokes Downloads Western Instruments W-PT Pull Test Bars - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pt-pull-test-bars-p-2012.html Tue, 20 Feb 2024 15:21:17 +0000 USD 2012 Western Instruments 993 W-PT https://www.abqindustrial.net/store/images/western-instruments-w-pt-pull-test-bars.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-fi-magnetometers-p-2011.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2011 ]]> 4 models of Disposable Field Indicators which provide readings in Gauss Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Models W-FI-10 - Intended to be used for Demagnetization and are calibrated during manufacture in a Homogeneous Field (Helmholtz Coil +/- 10 Gauss). W-FI-20 - Intended to check residual fields, and are calibrated during manufacture for a Homogeneous Field (Helmholtz Coil +/- 20 Gauss). W-FI-50 - Intended to check strong residual fields, and are calibrated during manufacture for a Homogeneous Field (Helmholtz Coil +/- 50 Gauss). W-FI-100 - Intended to check very strong residual fields, and are calibrated during manufacture for a Homogeneous Field (Helmholtz Coil +/- 100 Gauss). Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-fi-magnetometers-p-2011.html Tue, 20 Feb 2024 15:21:15 +0000 USD 2011 Western Instruments 994 W-FI https://www.abqindustrial.net/store/images/western-instruments-w-fi-magnetometers.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pps-portable-inverter-power-supply-p-2010.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2010 ]]> Portable Power Supply designed to operate any of Western Instruments’ standard AC or AC/DC Yokes These models draw 4 Amps at 115/60 Power and 2 Amps at 230/50 Power, which is well within the output of the 2 types of inverters (115 and 230VAC) The Western Instruments W-PPS Portable Inverter Power Supply is a Portable Power Supply designed to operate any of Western Instruments’ standard AC or AC/DC Yokes. The W-PPS is equipped with an appropriately sized Battery, Battery Charger, and Inverter which should be used within the parameters in the manual. Kit Contents 12 Volt Battery Inverter Battery Charger Aluminum Chassis Reinforced Canvas Satchel More Info Battery Charger;The charger will sense the condition of the battery, re-setting for an optimum charging cycle. Leaving the Charger connected to Mains Power, while operating a Yoke, will cause the Charger to draw full power and may cause an incomplete charging cycle for the Gel Cell Battery.The Mains Power Plug is accessible inside the Access Flap on the Canvas Bag. Inverter;Western Instruments Model PC115-400F (PC230-400F) Inverter isequipped with an On/Off Switch and Status LED’s. The Inverter is equipped with 2 Standard North American AC receptacles, while the 230 Volt Model is equipped with a single Universal AC Receptacle.These items are accessible inside the Access Flap on the Canvas Bag. The opposite end of the inverter is where the Pusher Cooling Fan is located, as well as the two fuses that are to protect the Inverter from an extended overload or short circuit.The Inverter is also equipped with a Temperature Protection circuit, that turns the unit off when it reaches 130°F (55°C).Lastly, when the output voltage from the battery drops below 10 VDC, the Inverter output stops, and the indicator LED will be red. The W-PPS and the W-PPSK are designed for Western Instruments’ very efficient WC and WE-Series Yokes.These models draw 4 Amps at 115/60 Power and 2 Amps at 230/50 Power, which is well within the output of the 2 types of inverters (115 and 230VAC). You have just unplugged the charger on your W-PPS, and left your base.When you arrive to your inspection site and are ready to start testing, plug in your AC Yoke and turn on your W-PPS.The battery on your W-PPS will permit your Yoke to lift 10 Pounds (4.6kg) for over 1 1/2 hours continuously, which means that you should have a little reserve power left after 8 hours of intensive MPI (Yoke activated 20 to 25% of time). Downloads Western Instruments W-PPS Portable Inverter Power Supply - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-pps-portable-inverter-power-supply-p-2010.html Tue, 23 Apr 2024 03:41:35 +0000 USD 2010 Western Instruments 1000 W-PPS https://www.abqindustrial.net/store/images/western-instruments-w-pps-portable-inverter-power-supply.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wmb-basic-wet-method-kit-p-2009.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2009 ]]> Ideal for a shop just starting a Magnetic Particle Inspection Program Yoke not included The Western Instruments W-WMB Basic Wet Method Kit is Ideal for a Field Inspector who wants a light and compact Wet Method MPI Kit for a small Black on White Inspection. Kit Contents 1 - Aerosol Cans Black Prepared Bath (Sherwin) 1 - Aerosol Cans White Contrast Paint (Sherwin) 1 - Aerosol Cans - Cleaner/Remover (Sherwin) Field Indicator(Magnetometer) Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments Wet Visible Method The Western Instruments Wet Visible Method particles have a mean particle size of 10 to 20 microns, so it is particularly good at detecting small cracks. This Wet Method Particle is most commonly Black. In order to highlight the very fine Black Particles, a White Lacquer Paint is used. We commonly refer to this method as Black on White. Wet Fluorescent MPI Inspection is very popular, however operators must have a UV Lamp (Black Light) in order to see the indications. Wet Fluorescent is a bit more sensitive than Wet Visible. Sherwin’s Glo-Netic is a high quality Fluorescent Wet Method Suspension, used for Magnetic Particle Inspection (MPI). Glo-Netic produces bright and clean indication to find microscopic cracks in ferrous metals during magnetic particle inspection. Glo-Netic fluoresces under long wave ultraviolet light (UVA), and shows a bright green-yellow indication. Unlike some of the most popular Wet Fluorescent Aerosols, Glo-Netic’s fluorescent additive is tightly adhered to the Iron Oxide in the suspension, thus there is a minimum of Fluorescent Background that is common with lower quality products. Wet Fluorescent MPI is very common for Mechanical Inspection in such industries as Aerospace, Forging, Casting, Automotive, Power Generation, and Mobile Equipment. Glo-Netic is widely used during; ▫Pressure Vessel Turn-arounds for stress and welding cracks. ▫Pipeline Digs to find Stress Corrosion Cracking. ▫Threaded Components used in Oilwell Drilling and Mobile Equipment. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wmb-basic-wet-method-kit-p-2009.html Tue, 20 Feb 2024 15:23:03 +0000 USD 2009 Western Instruments 1000 W-WMB https://www.abqindustrial.net/store/images/western-instruments-w-wmb-basic-wet-method-kit-00.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wm-wet-method-kit-p-2008.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2008 ]]> Ideal for a shop just starting a Magnetic Particle Inspection Program Yoke not included The Western Instruments W-WM Wet Method Kit is Ideal for a shop just starting a Magnetic Particle Inspection Program, or an Experienced Inspector who needs the necessary supplies to perform a through Wet Method Inspection.If testing Sandblasted surfaces, Cleaner/Remover may not be needed. Kit Contents 5 - Aerosol Cans Black Prepared Bath (Sherwin) 5 - Aerosol Cans White Contrast Paint (Sherwin) 10 - Aerosol Cans - Cleaner/Remover (Sherwin) Field Indicator Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments Wet Visible Method The Western Instruments Wet Visible Method particles have a mean particle size of 10 to 20 microns, so it is particularly good at detecting small cracks. This Wet Method Particle is most commonly Black. In order to highlight the very fine Black Particles, a White Lacquer Paint is used. We commonly refer to this method as Black on White. Wet Fluorescent MPI Inspection is very popular, however operators must have a UV Lamp (Black Light) in order to see the indications. Wet Fluorescent is a bit more sensitive than Wet Visible. Sherwin’s Glo-Netic is a high quality Fluorescent Wet Method Suspension, used for Magnetic Particle Inspection (MPI). Glo-Netic produces bright and clean indication to find microscopic cracks in ferrous metals during magnetic particle inspection. Glo-Netic fluoresces under long wave ultraviolet light (UVA), and shows a bright green-yellow indication. Unlike some of the most popular Wet Fluorescent Aerosols, Glo-Netic’s fluorescent additive is tightly adhered to the Iron Oxide in the suspension, thus there is a minimum of Fluorescent Background that is common with lower quality products. Wet Fluorescent MPI is very common for Mechanical Inspection in such industries as Aerospace, Forging, Casting, Automotive, Power Generation, and Mobile Equipment. Glo-Netic is widely used during; ▫Pressure Vessel Turn-arounds for stress and welding cracks. ▫Pipeline Digs to find Stress Corrosion Cracking. ▫Threaded Components used in Oilwell Drilling and Mobile Equipment. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wm-wet-method-kit-p-2008.html Tue, 20 Feb 2024 15:23:02 +0000 USD 2008 Western Instruments 1000 W-WM https://www.abqindustrial.net/store/images/western-instruments-w-wm-wet-method-kit.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wd-wet-dry-method-kit-p-2007.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2007 ]]> Ideal for Magnetic Particle Inspection Program Yoke not included The Western Instruments W-WD Wet / Dry Method Kit isIdeal for a shop just starting and Magnetic Particle Inspection Program, or a Field Inspector who wants a light and compact MPI Kit with both Dry and Wet Method Particles, Weighing 22 Pounds (10kg). The Western Instruments W-WD Wet / Dry Method Kit is supplied in one of our Cases. Any model of Yoke can be supplied and upgraded with a W-WD to our custom Case, which provides ample room. Kit Contents Powder Bulb 4 x 1.75 lbs. (794gr) Grey, Red, Black and Yellow Powder 2 - Aerosol Cans Black Prepared Bath (Sherwin) 2 - Aerosol Cans White Contrast Paint (Sherwin) 2 - Aerosol Cans Cleaner / Remover (Sherwin) Field Indicator(Magnetometer) Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments W-PB Powder Bulb The Western Instruments W-PB Powder Bulb Dry Method Magnetic Particles is applied by the inspector with a Powder Bulb. Western’s W-PB has been custom designed for this application Western Instruments Wet Visible Method The Western Instruments Wet Visible Method particles have a mean particle size of 10 to 20 microns, so it is particularly good at detecting small cracks. This Wet Method Particle is most commonly Black. In order to highlight the very fine Black Particles, a White Lacquer Paint is used. We commonly refer to this method as Black on White. Wet Fluorescent MPI Inspection is very popular, however operators must have a UV Lamp (Black Light) in order to see the indications. Wet Fluorescent is a bit more sensitive than Wet Visible. Sherwin’s Glo-Netic is a high quality Fluorescent Wet Method Suspension, used for Magnetic Particle Inspection (MPI). Glo-Netic produces bright and clean indication to find microscopic cracks in ferrous metals during magnetic particle inspection. Glo-Netic fluoresces under long wave ultraviolet light (UVA), and shows a bright green-yellow indication. Unlike some of the most popular Wet Fluorescent Aerosols, Glo-Netic’s fluorescent additive is tightly adhered to the Iron Oxide in the suspension, thus there is a minimum of Fluorescent Background that is common with lower quality products. Wet Fluorescent MPI is very common for Mechanical Inspection in such industries as Aerospace, Forging, Casting, Automotive, Power Generation, and Mobile Equipment. Glo-Netic is widely used during; ▫Pressure Vessel Turn-arounds for stress and welding cracks. ▫Pipeline Digs to find Stress Corrosion Cracking. ▫Threaded Components used in Oilwell Drilling and Mobile Equipment. Western Instruments Dry Magnetic Dusting Powders The Western Instruments Dry Magnetic Dusting Powders primarily for use in our various forms of MPI Yoke Kits.Western offers 4 different colors (White/Grey, Blue/Black, Red, & Yellow) of powder, to ensure maximum contrast with the Workpiece.In North America Dry Powders are used extensively in less stringent applications, as it is very easy and fast to apply.In other areas of the Globe, Dry Method Inspection is simply not permitted, requiring the use of Wet Method Media. When replacing spent powders, one must ensure the correct size of container is ordered.Kit containers are either 400g/0.8 Pounds or 800g/1.75 Pounds.Many End Users will use larger volumes of Powder, so Western offers larger containers, namely; 2.3kg/5 Pounds, 4.5kg/10 Pounds, 11.4 kg/25 Pounds, and 22.7kg/50 Pounds. As Western is not a manufacturer of Inspection Media, do not look to us for excessively lower prices.We offer proven quality, in repeatable Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-wd-wet-dry-method-kit-p-2007.html Tue, 20 Feb 2024 15:23:00 +0000 USD 2007 Western Instruments 999 W-WD https://www.abqindustrial.net/store/images/western-instruments-w-wd-wet-dry-method.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-swfd-wet-fluorescent-dry-method-kit-p-2006.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2006 ]]> Ideal for Magnetic Particle Inspection Program Yoke not included The Western Instruments W-SWFD Wet Fluorescent / Dry Method Kit isthe inspector the ultimate in convenience for fast spot checks, or spending a couple of hours performing a critical Wet Fluorescent or Dry Method Inspection. This versatile Kit can be equipped with any model of our Yokes. The Flash Light style UV Light (Western’s SPR-365) uses state of the art LED technology to produce a high intensity Black Light, similar to old Ballasted Lamps. When equipped with our WC-9 Cordless Yoke this Kit gives the inspector the ultimate in versatility and convenience all in a single case. We offer Refills of 4 and 8 Aerosol Cans to keep the inspector’s supplies up. If testing Sandblasted surfaces, Cleaner/Remover may not be needed, so Aerosols can be just 8 Cans Wet Fluorescent Particle Bath, or all Dry Powder can be a single color. Single (1¾ Pound/800g) jars of Dry Powder are also available, or can be purchased separately in heavier containers Kit Contents Powder Bulb 4 - Aerosol Cans Fluorescent Particle Bath (Sherwin) 4 - Aerosol Cans Cleaner/Remover (Sherwin) Field Indicator (Magnetometer) SPR-365 LED UV Flash Light (Torch): Wrist Strap Battery Charger Spare Battery UV Spectacles Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments W-PB Powder Bulb The Western Instruments W-PB Powder Bulb Dry Method Magnetic Particles is applied by the inspector with a Powder Bulb. Western’s W-PB has been custom designed for this application Western Instruments Wet Visible Method The Western Instruments Wet Visible Method particles have a mean particle size of 10 to 20 microns, so it is particularly good at detecting small cracks. This Wet Method Particle is most commonly Black. In order to highlight the very fine Black Particles, a White Lacquer Paint is used. We commonly refer to this method as Black on White. Wet Fluorescent MPI Inspection is very popular, however operators must have a UV Lamp (Black Light) in order to see the indications. Wet Fluorescent is a bit more sensitive than Wet Visible. Sherwin’s Glo-Netic is a high quality Fluorescent Wet Method Suspension, used for Magnetic Particle Inspection (MPI). Glo-Netic produces bright and clean indication to find microscopic cracks in ferrous metals during magnetic particle inspection. Glo-Netic fluoresces under long wave ultraviolet light (UVA), and shows a bright green-yellow indication. Unlike some of the most popular Wet Fluorescent Aerosols, Glo-Netic’s fluorescent additive is tightly adhered to the Iron Oxide in the suspension, thus there is a minimum of Fluorescent Background that is common with lower quality products. Wet Fluorescent MPI is very common for Mechanical Inspection in such industries as Aerospace, Forging, Casting, Automotive, Power Generation, and Mobile Equipment. Glo-Netic is widely used during; ▫Pressure Vessel Turn-arounds for stress and welding cracks. ▫Pipeline Digs to find Stress Corrosion Cracking. ▫Threaded Components used in Oilwell Drilling and Mobile Equipment. Western Instruments Dry Magnetic Dusting Powders The Western Instruments Dry Magnetic Dusting Powders primarily for use in our various forms of MPI Yoke Kits.Western offers 4 different colors (White/Grey, Blue/Black, Red, & Yellow) of powder, to ensure maximum contrast with the Workpiece.In North America Dry Powders are used extensively in less stringent applications, as it is very easy and fast to apply.In other areas of the Globe, Dry Method Inspection is simply not permitted, requiring the use of Wet Method Media. When replacing spent powders, one must ensure the correct size of container is ordered.Kit containers are either 400g/0.8 Pounds or 800g/1.75 Pounds.Many End Users will use larger volumes of Powder, so Western offers larger containers, namely; 2.3kg/5 Pounds, 4.5kg/10 Pounds, 11.4 kg/25 Pounds, and 22.7kg/50 Pounds. As Western is not a manufacturer of Inspection Media, do not look to us for excessively lower prices.We offer proven quality, in repeatable Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-swfd-wet-fluorescent-dry-method-kit-p-2006.html Tue, 20 Feb 2024 15:22:59 +0000 USD 2006 Western Instruments 1000 W-SWFD https://www.abqindustrial.net/store/images/western-instruments-w-wfd-wet-fluorescent-dry-method-kit.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-swf-self-contained-wet-fluorescent-kit-p-2005.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2005 ]]> Ultimate in convenience for fast spot checks Yoke not included The Western Instruments W-SWF Self Contained Wet Fluorescent Kit is the ultimate in convenience for fast spot checks, or spending a couple of hours performing a critical Wet Fluorescent Inspection. Illustrated above with a Yoke, The Flash Light style UV Lamp (Western’s SPR-365) uses state of the art LED technology to produce a high intensity Black Light. The combination of a Yoke and the Flash Light style UV Lamp, gives the inspector the versatility and convenience with a single case. The Western Instruments W-SWF Self Contained Wet Fluorescent Kit is Ideal for a shop just starting a Magnetic Particle Inspection Program,or an Experienced Inspector who needs the necessary supplies to perform a through Wet Method Inspection. We offer Refills of 6 and 12 Aerosol Cans to keep the inspector’s supplies up. If testing Sandblasted surfaces, Cleaner / Remover may not be needed. Kit Contents 8 - Aerosol Cans Fluorescent Particle Bath (Sherwin) 8 - Aerosol Cans Cleaner/Remover (Sherwin) Field Indicator SPR-365 LED UV Flash Light (Torch): Wrist Strap Battery Charger Spare Battery UV Spectacles Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments Wet Visible Method The Western Instruments Wet Visible Method particles have a mean particle size of 10 to 20 microns, so it is particularly good at detecting small cracks. This Wet Method Particle is most commonly Black. In order to highlight the very fine Black Particles, a White Lacquer Paint is used. We commonly refer to this method as Black on White. Wet Fluorescent MPI Inspection is very popular, however operators must have a UV Lamp (Black Light) in order to see the indications. Wet Fluorescent is a bit more sensitive than Wet Visible. Sherwin’s Glo-Netic is a high quality Fluorescent Wet Method Suspension, used for Magnetic Particle Inspection (MPI). Glo-Netic produces bright and clean indication to find microscopic cracks in ferrous metals during magnetic particle inspection. Glo-Netic fluoresces under long wave ultraviolet light (UVA), and shows a bright green-yellow indication. Unlike some of the most popular Wet Fluorescent Aerosols, Glo-Netic’s fluorescent additive is tightly adhered to the Iron Oxide in the suspension, thus there is a minimum of Fluorescent Background that is common with lower quality products. Wet Fluorescent MPI is very common for Mechanical Inspection in such industries as Aerospace, Forging, Casting, Automotive, Power Generation, and Mobile Equipment. Glo-Netic is widely used during; ▫Pressure Vessel Turn-arounds for stress and welding cracks. ▫Pipeline Digs to find Stress Corrosion Cracking. ▫Threaded Components used in Oilwell Drilling and Mobile Equipment. Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-swf-self-contained-wet-fluorescent-kit-p-2005.html Tue, 20 Feb 2024 15:22:57 +0000 USD 2005 Western Instruments 1000 W-SWF https://www.abqindustrial.net/store/images/western-instruments-w-swf-wet-fluorescent-kit-00.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-dmb-basic-dry-method-kit-p-2004.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2004 ]]> Ideal for a shop just starting a Magnetic Particle Inspection Program Yoke not included The Western InstrumentsW-DMB Basic Dry Method Kit is is Ideal for a shop just starting a Magnetic Particle Inspection Program, or a Field Inspector who wants a light and compact MPI Kit. Kit Contents Powder Bulb 1 - 0f 0.75 lbs. (340gr) of Dry Method Powder Red 1 - 0f 0.75 lbs. (340gr) of Dry Method PowderYellow Field Indicator(Magnetometer) Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments W-PB Powder Bulb The Western Instruments W-PB Powder Bulb Dry Method Magnetic Particles is applied by the inspector with a Powder Bulb. Western’s W-PB has been custom designed for this application Western Instruments Dry Magnetic Dusting Powders The Western Instruments Dry Magnetic Dusting Powders primarily for use in our various forms of MPI Yoke Kits.Western offers 4 different colors (White/Grey, Blue/Black, Red, & Yellow) of powder, to ensure maximum contrast with the Workpiece.In North America Dry Powders are used extensively in less stringent applications, as it is very easy and fast to apply.In other areas of the Globe, Dry Method Inspection is simply not permitted, requiring the use of Wet Method Media. When replacing spent powders, one must ensure the correct size of container is ordered.Kit containers are either 400g/0.8 Pounds or 800g/1.75 Pounds.Many End Users will use larger volumes of Powder, so Western offers larger containers, namely; 2.3kg/5 Pounds, 4.5kg/10 Pounds, 11.4 kg/25 Pounds, and 22.7kg/50 Pounds. As Western is not a manufacturer of Inspection Media, do not look to us for excessively lower prices.We offer proven quality, in repeatable Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-dmb-basic-dry-method-kit-p-2004.html Tue, 20 Feb 2024 15:22:55 +0000 USD 2004 Western Instruments 999 W-DMB https://www.abqindustrial.net/store/images/western-instruments-w-dmb-basic-dry-method-kit-00.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-dm-deluxe-dry-method-kit-p-2003.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2003 ]]> Ideal for a Field Inspector Yoke not included The Western InstrumentsW-DM Deluxe Dry Method Kit is is Ideal for a shop just starting a Magnetic Particle Inspection Program, or a Field Inspector who wants a light and compact MPI Kit Kit Contents Powder Bulb 4 x 1.75 lbs. (794gr) Grey, Red, Black and Yellow Powder Field Indicator(Magnetometer) Instruction Manual Carrying Case Yoke not included Related Products Western Instruments W-FI Magnetometers Western Instruments W-FI Magnetometers is manufactured in 4 models of Disposable Field Indicators, which provide Gaussian readings Western Instruments W-PB Powder Bulb The Western Instruments W-PB Powder Bulb Dry Method Magnetic Particles is applied by the inspector with a Powder Bulb. Western’s W-PB has been custom designed for this application Western Instruments Dry Magnetic Dusting Powders The Western Instruments Dry Magnetic Dusting Powders primarily for use in our various forms of MPI Yoke Kits.Western offers 4 different colors (White/Grey, Blue/Black, Red, & Yellow) of powder, to ensure maximum contrast with the Workpiece.In North America Dry Powders are used extensively in less stringent applications, as it is very easy and fast to apply.In other areas of the Globe, Dry Method Inspection is simply not permitted, requiring the use of Wet Method Media. When replacing spent powders, one must ensure the correct size of container is ordered.Kit containers are either 400g/0.8 Pounds or 800g/1.75 Pounds.Many End Users will use larger volumes of Powder, so Western offers larger containers, namely; 2.3kg/5 Pounds, 4.5kg/10 Pounds, 11.4 kg/25 Pounds, and 22.7kg/50 Pounds. As Western is not a manufacturer of Inspection Media, do not look to us for excessively lower prices.We offer proven quality, in repeatable Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/portable-mpi-yoke-inspection-kits-c-109_167/western-instruments-w-dm-deluxe-dry-method-kit-p-2003.html Tue, 20 Feb 2024 15:22:54 +0000 USD 2003 Western Instruments 998 W-DM https://www.abqindustrial.net/store/images/western-instruments-w-dm-deluxe-dry-method-kit-00.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-particle-inspection-mpi-coils-c-109_62/western-instruments-ws-series-pulsed-drill-pipe-magnetizing-mpi-coils-p-2002.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2002 ]]>Western Instruments WS-Series Magnetizing Coil Powerful yet extremely light MPI Coils meet many applicable specifications for MPI Shown here in 8”, 10”, 12” and 14” sizes The Western Instruments WS-Series Magnetizing Coil is list of Portable MPI Equipment. These powerful yet extremely light MPI Coils meet many applicable specifications for MPI. The WS-Series use Western Instruments' innovative Capacitive Discharge Power Supply. The unique WS power supply provides the necessary energy pulse to provide an output of 1,200 Amp Turns per inch of ID and more specifically greater than 400 Gauss in the Center of the Coil. These outputs are common to all four models: WS-8, WS-10, WS-12 and WS-14, while all remain under 20 pounds (9kg). In the Oil well Drilling Business WS-Coils are commonly called Drilco (Drill Pipe Coils), where Drill Pipe is rarely Demagnetized. It is typically the Tools on the Bottom End of the Drilling String that are demagnetized, and where our WD-Series Coils earned their reputation. Drill Pipe Coils pulse about once per second and induce a very high Residual Magnetic Field, into the workpiece. Specifications Diameter Range 23/8" to 133/8" End Areas Meets Output requirements of DS1 and NS-2 Centerline field > 400 Gauss CD pulse rate 1 Pulse per second Power 110VAC / 60Hz @ 15 amps, 230VAC / 50Hz @ 15 amps Depth 35/8" (92mm) Model Weight Lbs ( mm ) Size In (kg) Amperes & Voltage Amp Turns / Gauss WS-8 14 Pounds (7kg) 8" (201 mm) 15 Amps 115V/60Hz 17,000 DC (@1Hz) 1,125 Gauss WS-8K 14 Pounds (7kg) 8" (201 mm) 15 Amps 230V 50Hz (Inrush Current) 17,000 DC (@1Hz) 1,125 Gauss WS-10 16 Pounds (8kg) 10" (254 mm) 15 Amps 115V/60Hz 16.000 DC (@1Hz) 800 Gauss WS-10K 16 Pounds (8kg) 10" (254 mm) 15 Amps 230V 50Hz (Inrush Current) 16.000 DC (@1Hz) 800 Gauss WS-12 18 Pounds (8.5kg) 12" (305 mm) 15 Amps 115V/60Hz 15,500 DC (@1Hz) 620 Gauss WS-12K 18 Pounds (8.5kg) 12" (305 mm) 15 Amps 230V 50Hz (Inrush Current) 15,500 DC (@1Hz) 620 Gauss WS-14 19 Pounds (8.6kg) 14" (355 mm) 15 Amps 115V/60Hz 15,000 DC (@1Hz) 580 Gauss WS-14K 19 Pounds (8.6kg) 14" (355 mm) 15 Amps 230V 50Hz (Inrush Current) 15,000 DC (@1Hz) 580 Gauss Model Description Comments WS-8WS-8K Pulsed DC Drill Pipe Coil Pulsed Drill Pipe Coil, with fixed DC output. Using our specialized Capacitive Discharge Power Supply, that pulses once per second. 50% Duty Cycle WS-10WS-10K Pulsed DC Drill Pipe Coil Strong DC Field like the old Drilco Pulse Coils. WS Coils are activated intermitently with our durable Endrgize Button WS-12WS-12K Pulsed DC Drill Pipe Coil Strong DC Field like the old Drilco Pulse Coils. WS Coils are activated intermitently with our durable Endrgize Button WS-14WS-14K Pulsed DC Drill Pipe Coil Powerful DC Pulse, once per second from a our CD (Capacitive Discharge) Power Supply. Results in a strong Residual Field. Meets requirments for an Active Field Inspection Downloads Western Instruments WS-Series Pulsed Drill Pipe Magnetizing MPI Coils - Data Sheet Western Instruments WS-Series Pulsed Drill Pipe Magnetizing MPI Coils - Instruction Manual Western Instruments WS-Series Pulsed Drill Pipe Magnetizing MPI Coils - Summary Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-particle-inspection-mpi-coils-c-109_62/western-instruments-ws-series-pulsed-drill-pipe-magnetizing-mpi-coils-p-2002.html Thu, 04 Apr 2024 22:00:58 +0000 USD 2002 Western Instruments 1000 WS-Series https://www.abqindustrial.net/store/images/western-instruments-ws-series-magnetizing-coil.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-particle-inspection-mpi-coils-c-109_62/western-instruments-wp-series-magnetizing-demagnetization-mpi-coils-p-2001.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2001 ]]>Western Instruments WP-Series MPI Coils Magnetic Particle Inspection MPI Coils Shown here in 8", 10", 12" and 14" sizes The Western Instruments WP-Series Magnetic Particle Inspection MPI Coils offer over 7000 Amp Turns of Half Wave DC Output and 4000 Amp Turns in AC. WP-Series Magnetic Particle Inspection MPI Coils are set apart from other coils due to their Demag Option, which allows for Reversing and Decaying DC Magnetization. WP-Series MPI Coils are available in AC Output only, with the option to add a fixed DC Output making WP-Series very powerful AC/DC Magnetizing Coils. Further, adding the Variable DC Output Option allows operators to control the amount of field so parts do not become saturated. Lastly, crowning a WP-Series. Magnetizing Coil with the Reversible DC Field Option, allows the operator to perform Reversing/Decaying DC Demagnetization. WP-Series Coils, with or without options, are offered in 4 different ID sizes: 8" (203 mm), 10" (254 mm), 12" (305 mm), and 14" (356 mm). These are still not Drill Pipe Coils..Please check out our WS-Series Drill Pipe Coils, for that. WP-Series Coil Summary Western Instruments new Medium Duty WP-Series of Portable MPI Coils are a completely new platform. They are not based on any existing type of Coil, having been developed from Customer input and using our advanced Electro-Mechanical Engineering. WP-Series Coils are being offered in 4 different ID Sizes; 8” (203mm), 10” (254mm), 12” (305mm) and 14” (355mm), and have been appropriately named; WP-8, WP-10, WP-12 and WP-14. WP-Series Coils are based on a Specially Designed AC Platform, with the ability to add Half -wave (Pulsed) DC characteristics as an AC/DC Yoke. The AC Output of WP-Series Coils is 30% stronger than any other Portable AC Coils. WP-Series Coils are being offered with 4 different Control Packages Basic Models: WP-8, WP-10, and WP-12 Energize Button. Output: 4,000 Amp Turns AC AC/DC Models: WP-8D, WP-10D, and WP-12D Energize Button. Output: 4,000 Amp Turns AC 6,000 Amp Turns DC Output. AC/Variable DC Models: WP-8DV, WP-10DV, and WP-12DV Energize Button. Output: 4,000 Amp Turns AC 0 to 6,000 Amp Turns DC Output. AC/Variable and Reversing DC Models; WP-8DVR, WP-10DVR, and WP-12DVR Energize Button. Output: 4,000 Amp Turns AC 0 to 6,000 Amp Turns DC Output. Reversible Polarity (Positive / Negative) for Reversing DC Demagnetization Like all of Western’s Portable MPI Equipment, the WP-Series are being manufactured in both North American Domestic Voltages (115VAC/60Hz), as well as European Standards (230VAC/50Hz). The Control Housing for WP-Series Coils is securely fastened to the moulded coil with internal aluminum custom fasteners. In turn, the Housing is of a Welded Aluminum Construction, and the Handle not only makes handling easy, but also protects the Control Actuators from mechanical damage. With the control panel also being anodized aluminum, the entire assembly makes an excellent heat sink to dissipate heat from the electrical / electronic controls, increasing the duty cycle drastically. Regardless of the Control Option selected, Western offers an optional foot switch. The Foot Switch allows the Coil to be instantaneously activated by either the Energize Button or the Foot Switch. WP-Series Coils are moulded from a robust Urethane Rubber, for years of durable service. A Foot is integral to the WP-Series Urethane Rubber casting, and is used to keep the Coil from Rolling, as an aid to handling, or as a mounting point. Our Medium Duty WP-Series Coils are an economical alternative to our Heavy Duty WD-Series Coils. While the more powerful WD-Series Coils are designed for the most stringent industry specifications, WP-Series Coils meet or exceed all standard industry specifications such as ASTM E1444 & E709, NAVSEA 271-97, and ISO 9934-3 for Portable Coils. Specifications Model Size In (kg) Weight Lbs ( mm) Amperes & Voltage Amp Turns / Gauss WP-8 8" (201 mm) 11lbs (5.5kg ) 13 Amps 115V / 60Hz 3250 AC WP-8K 8" (201 mm) 11lbs (5.5kg ) 6.5 Amps 230V 50Hz 3250 AC WP-8D 8" (201 mm) 13lbs (6kg) 13 Amps 115V / 60Hz 3250 AC 6000 DC WP-8DK 8" (201 mm) 13lbs (6kg) 6.5 Amps 230V 50Hz 3250 AC 6000 DC WP-8DV 8" (201 mm) 15lbs (7.5kg) 13 Amps 115V / 60Hz 3050 AC 0 to 6000DC WP-8DVK 8" (201 mm) 15lbs (7.5kg) 6.5 Amps 230V 50Hz 3050 AC 0 to 6000DC WP-8DVR 8" (201 mm) 17lbs (5.5kg) 13 Amps 115V / 60Hz 2875 AC +/- 0 to 6000DC WP-8DVRK 8" (201 mm) 17lbs (5.5kg) 6.5 Amps 230V 50Hz 2875 AC +/- 0 to 6000DC WP-10 10" (254 mm) 11lbs (5.5kg ) 15 Amps 115V / 60Hz 3250 AC WP-10K 10" (254 mm) 11lbs (5.5kg ) 8 Amps 230V 50Hz 3250 AC WP-10D 10" (254 mm) 12lbs (6kg) 15 Amps 115V / 60Hz 3050 AC 6000 DC WP-10DK 10" (254 mm) 12lbs (6kg) 8 Amps 230V 50Hz 3050 AC 6000 DC WP-10DV 10" (254 mm) 12lbs (6kg) 15 Amps 115V / 60Hz 3050 AC 6000 DC WP-10DVK 10" (254 mm) 12lbs (6kg) 8 Amps 230V 50Hz 3050 AC 6000 DC WP-10DVR 10" (254 mm) 15lbs (5.5kg) 15 Amps 115V / 60Hz 2,875 AC +/- 0 to 6000 DC WP-10DVRK 10" (254 mm) 15lbs (5.5kg) 8 Amps 230V 50Hz 2,875 AC +/- 0 to 6000 DC WP-12 12" (305 mm) 11lbs (5.5kg ) 16 Amps 115V / 60Hz 3250 AC WP-12K 12" (305 mm) 11lbs (5.5kg ) 9 Amps 230V 50Hz 3250 AC WP-12D 12" (305 mm) 12lbs (5.5kg) 16 Amps 115V / 60Hz 3250 AC 6000 DC WP-12DK 12" (305 mm) 12lbs (5.5kg) 9 Amps 230V 50Hz 3250 AC 6000 DC WP-12DV 12" (305 mm) 15lbs (5.5kg) 16 Amps 115V / 60Hz 3050 AC 0 to 6000DC WP-12DVK 12" (305 mm) 15lbs (5.5kg) 9 Amps 230V 50Hz 3050 AC 0 to 6000DC WP-12DVR 12" (305 mm) 15lbs (5.5kg) 16 Amps 115V / 60Hz 3050 AC +/- 0 to 6000DC WP-12DVRK 12" (305 mm) 15lbs (5.5kg) 9 Amps 230V 50Hz 3050 AC +/- 0 to 6000DC WP-14 14" (355 mm) 17lbs (8kg) 18 Amps 115V / 60Hz 2875 AC WP-14K 14" (355 mm) 17lbs (8kg) 10 Amps 230V 50Hz 2875 AC WP-14D 14" (355 mm) 17lbs (8kg) 18 Amps 115V / 60Hz 2875 AC 6000 DC WP-14DK 14" (355 mm) 17lbs (8kg) 10 Amps 230V 50Hz 2875 AC 6000 DC WP-14DV 14" (355 mm) 17lbs (8kg) 18 Amps 115V / 60Hz 2875 AC 6000 DC WP-14DVK 14" (355 mm) 17lbs (8kg) 10 Amps 230V 50Hz 2875 AC 6000 DC WP-14DVR 14" (355 mm) 17lbs (8kg) 18 Amps 115V / 60Hz 2,875 AC +/- 0 to 6000 DC WP-14DVRK 14" (355 mm) 17lbs (8kg) 10 Amps 230V 50Hz 2,875 AC +/- 0 to 6000 DC * 'K' - Added to any coil designation designates 220-240V AC 50Hz   Model Description Comments WP-8WP-8k AC only Coil Base model of these Small ID Medium Duty Coils. Upgradable with DC Options, to allow these Coils to be full feature for greater inspection capabilities. WP-8DWP-8DK AC and DC Coil Base AC / DC model of these Small ID Medium Duty Coils. Upgraded with DC Option, to allow surface and sub-surface inspection capabilities. WP-8DVWP-8DVK AC with Variable DC Coil AC / Variable DC model of these Small ID Medium Duty Coils. Upgraded with Variable DC Option, to allow surface and sub-surface inspection capabilities. WP-8DVRWP-8DVRK AC with Variable & Reversing DC Coil AC / Variable and Reversible DC model of these Small ID Medium Duty Coils. Upgraded with Variable and Reversing DC Option, to allow Reversing DC Demag capabilities. WP-10WP-10K AC only Coil Base model of these mid-Size Medium Duty Coils. Upgradable with DC Options, to allow these Coils to be full feature for greater inspection capabilities. WP-10DWP-10DK AC and DC Coil Base AC / DC model of these mid-Size Medium Duty Coils. Upgraded with DC Option, to allow surface and sub-surface inspection capabilities. WP-10DVWP-10DVK AC with Variable DC Coil AC / Variable DC model of these mid-Size Medium Duty Coils. Upgraded with DC Option, to allow surface and sub-surface inspection capabilities. WP-10DVRWP-10DVRK AC with Variable & Reversing DC Coil AC / Variable and Reversible DC model of these mid-Size Medium Duty Coils. Upgraded with Variable and Reversing DC Option, to allow Reversing DC Demag capabilities. WP-12WP-12K AC only Coil Base model of these Larger Size Medium Duty Coils. Upgradable with DC Options, to allow these Coils to be full feature for greater inspection capabilities. WP-12DWP-12DK AC and DC Coil Base AC / DC model of these Larger Size Medium Duty Coils. Upgraded with DC Option, to allow surface and sub-surface inspection capabilities. WP-12DVWP-12DVK AC with Variable DC Coil AC / Variable DC model of these Larger Size Medium Duty Coils. Upgraded with DC Option, to allow surface and subsurface inspection capabilities. WP-12DVRWP-12DVRK AC with Variable & Reversing DC Coil AC / Variable and Reversible DC model of these Larger Size Medium Duty Coils. Upgraded with Variable and Reversing DC Option, to allow Reversing DC Demag capabilities. WP-14WP-14K AC only Coil Base model of these Larger Size Medium Duty Coils. Upgradable with DC Options, to allow these Coils to be full feature for greater inspection capabilities. WP-14DWP-14DK AC and DC Coil Base AC / DC model of these Larger Size Medium Duty Coils. Up-graded with DC Option, to allow surface and sub-surface inspection capabilities. WP-14DVWP-14DVK AC with Variable DC Coil Base AC / DC model of these Larger Size Medium Duty Coils. Upgraded with DC Option, to allow surface and sub-surface inspection capabilities. WP-14DVRWP-14DVRK AC with Variable & Reversing DC Coil AC / Variable and Reversible DC model of these Larger Size Medium Duty Coils. Upgraded with Variable and Reversing DC Option, to allow Reversing DC Demag capabilities. * 'K' - Added to any coil designation designates 220-240V AC 50Hz Downloads Western Instruments Medium Duty WP-Series Magnetizing / Demagnetization Coils - Data Sheet Western Instruments Medium Duty WP-Series Magnetizing / Demagnetization Coils - Instruction Manual Western Instruments Medium Duty WP-Series Magnetizing / Demagnetization Coils - Summary Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-particle-inspection-mpi-coils-c-109_62/western-instruments-wp-series-magnetizing-demagnetization-mpi-coils-p-2001.html Sat, 08 Jun 2024 04:07:36 +0000 USD 2001 Western Instruments 1000 WP-Series https://www.abqindustrial.net/store/images/western-instruments-wp-series-coils.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-wc-6uw-compact-underwater-yoke-p-2000.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2000 ]]>Western Instruments WC-6UW Compact Underwater Yoke Developed for Underwater use Supplied with a Pig Tail The Western Instruments WC-6UW Compact Underwater Yoke is developed for Underwater use, such as Offshore Platforms, Pipelines, Ships, etc. The WC-6UW is supplied from a switchable Top Side power supply; 115 or 230 VAC, Pulsed DC, or a 12 Volt Battery. The WC-6UW is supplied with a Pig Tail, or optionally with 250 feet (76m) of Power Cable. The Western Instruments WC-6UW Compact Underwater Yoke is an AC Yoke designed for Underwater Magnetic Particle Inspection. The WC-6UW induces a magnetic field into the ferrous material being tested from an external power supply. This power supply can be either 115VAC (or 230VAC K Models) or 12VDC), but must be fully grounded and equipped with a GFI. The Western Instruments WC-6UW Compact Underwater Yoke is manufactured for full submergence to 300’ (91m), thus it is exposed to high static heads. To counteract this pressure, each lamination within the Iron Lamination Frame is sealed to prevent the ingress of water. Specifications Model WC-6UW (115V) WC-6UWK (230V) Voltage 115VAC 230VAC Frequency 60 Hz 50 Hz Current 4.0 Amps 2.0 Amps Controls Top Side or Approved Underwater Device Capacity Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-wc-6uw-compact-underwater-yoke-p-2000.html Thu, 04 Apr 2024 22:28:52 +0000 USD 2000 Western Instruments 999 WC-6UW https://www.abqindustrial.net/store/images/western-instruments-wc-6uw-compact-underwater-yoke.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-6cs-ac-cavity-yoke-p-1999.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1999 ]]>Western Instruments W-6CS AC Cavity Yoke Reliable Pole Piece positioning, to ensure a beneficial inspection field. Better and Faster Access for directing the Wet Method Media to the Target Area. The Western Instruments W-6CS AC Cavity Yoke has been developed due to customer requests for safer and faster Wet Method Inspection in tight spaces or unusual work piece configurations. The W-6CS has many of the unique features of both our WC and WE-Series Yokes, such as the unique Power Cord Strain Relief and Urethane Housing, Safety Features, and Ruggedness. When operators were inspecting tight cavities with an Active AC Field, they were filling this space with their Yoke and Hand to keep the Yoke energized while trying to spray the Wet Method Media. The Western Instruments W-6CS AC Cavity Yoke permits the Yoke to be activated without the Hand (and the Switch) being in the small space. The Western Instruments W-6CS AC Cavity Yoke is intended to inspect; Triplex Pump Housings, Centrifugal Pump Housings, ID Threads (Box Ends), Cylinder Bores, Bores in Castings, Turbine Blades, Pressure Equipment Nozzles, and Complex Structural Steel for Stress Cracks or Weld Inspection. Features Reliable Pole Piece positioning, to ensure a beneficial inspection field. Better and Faster Access for directing the Wet Method Media to the Target Area. Allowing the operator to see where he is applying his bath. Removes the Switch from the Target Area, drastically reducing the potential for electrical shocks because the Switch area remains dry Specifications Model W-6CS W-6CSK Voltage 115VAC @ 60 Hz 230VAC @ 50 Hz Current 4.0 Amps @ 115 Volts 2 Amps @ 230 Volts Capacity Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-w-6cs-ac-cavity-yoke-p-1999.html Tue, 20 Feb 2024 15:21:59 +0000 USD 1999 Western Instruments 998 W-6CS https://www.abqindustrial.net/store/images/western-instruments-w-6cs-ac-cavity-yoke.jpg https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/western-instruments-n88l-3-multi-weld-gauge-p-1998.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1998 ]]>3 separate scales 7 unique diameter comparators The Western Instruments N88L-3 Multi-Weld Gauge provides an easy way to read measurements of the following welding and fit-up parameters: Internal Hi-Lo, Gap, Filet Height and Leg Length, Weld Height, Undercut Depth, Misalignment, and Angle of Preparation. The Multi-Weld Gauge is equipped with 3 separate scales for all measurements. Metric and Imperial (Thousands of an inch and fractions of an inch). Rules for liner measurements are located on the top and bottom of the Front side of the Scale Plate. The Multi-Weld Gauge is also equipped with 7 unique diameter comparators which are half circles in 1/16" to 1/2" in 1/16" increments (1.6mm to 12.7mm in 1.6mm increments) for convenient diameter estimates (Filet Welds, Welding Rod/Wire, etc.) The Multi-Weld Gauge does away with Single Purpose Welding Gauges, by consolidating the functions of the 4 most popular gauges, with over 9 measurement functions. The contrast of the scales against the black background, make the Multi-Weld Gauge extremely easy to read on any of its measurement scales. The Multi-Weld is unique, a distinct improvement over existing gauges. Weld and Fit-Up parameters are outlined in numerous industry specifications, such as; AWS, ASME, API, ANSI, ISO, DIN, CEN, and Military Specifications. Of particular importance for AWS Inspectors, the Multi-Weld Gauge will resolve and measure Undercut to +/- 0.010” (0.5mm), something no other Lever Type Welding Gauge can do. Features Internal Hi-Lo Gap Filet Height and Leg Length Weld Height Undercut Depth Misalignment Angle of Preparation Calibration The Multi-Weld Gauge is assembled by a skilled technician, using appropriate tools and fixtures, to ensure the scales and Levers/Sliders are fully tested to ensure there linearity over the entire measuring range. During normal operation, the Contact Points (Height / Depth, and Fillet Height) can become worn or damaged, thus hindering the accuracy of the Multi-Weld Gauge. If a Multi-Weld Gauge is found to have an inaccuracy, it can be tested by Western Instruments or an authorized calibration depot. However, with the right tools and a thickness standard, one can check and re-standardize the Multi-Weld Gauge. The tools required are a small ball peen hammer, a fine file, and a thickness Standard. The Thickness Standard, preferably Cold Rolled Steel, must be less than the full deflection of the Multi-Weld’s Height/Depth range 3 to 25mm or 0.10” to 1.00”. After one determines the Contact Point (Height /Depth or Filet Height) is too short or long, the contact point is easily adjusted. If these Contact Points are long (low measurements), lightly file the lower angled edge, on the Height / Depth Pointer, closest to the Scale Plate. On the Fillet Height Pointer, the point is lightly filed to make it a little more flat. After each draw of the fine file, the accuracy of the corresponding Points should be checked, on both the high and low end of the Height/Depth scale. On the Filet Height scale, the pointers height is simply verified. If the Multi-Weld Pointers are measuring high (short Contact Point), the bottom portion of the Contact Point should be placed flat on an anvil, that is the Gauge resting on its side. Give a light flat tap, with the broad face of your small Ball Peen Hammer, to the end of the Contact Point. Again, after each tap, the accuracy of the Gauge should be checked on the scales in the manner outlined above. While standardizing a Multi-Weld Gauge in this manner, patience and thought go a long way. The Multi-Weld Gauge has passed many experienced Welder Inspector’s critical Tests, you can put it in your back pocket, and nothing digs in! Downloads Western Instruments N88L-3 Multi-Weld Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/pit-gauges-c-99/pit-depth-gauges-c-99_9/western-instruments-n88l-3-multi-weld-gauge-p-1998.html Fri, 14 Jun 2024 12:09:09 +0000 USD 1998 Western Instruments 986 N88L-3 https://www.abqindustrial.net/store/images/western-instruments-n88l-3-multi-weld-gauge.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-735-battery-powered-xenon-stroboscope-p-1997.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1997 ]]>Battery Powered Xenon Stroboscope Range: 60 - 12,000 RPM/FPM NIST-Traceable Calibration Certificate & Test Report optionally available Flash Range: 60-12,000 RPM/FPM The Shimpo DT-735 Battery Powered Xenon Stroboscope is a portable, highly stable, industrial- quality stroboscope for non-contact inspection and observation of moving parts by providing the user the illusion of stopped or slowed down equipment movement. A rugged metal enclosure allows the Shimpo DT-735 Battery Powered Xenon Stroboscope to withstand harsh industrial usage. The internal rechargeable battery and included top and bottom handles aid in portability and usage flexibility. The control adjustment settings allow the flash rate to be readily altered by the user to visually inspect rotating or reciprocating machinery such as gear teeth, rotors, shafts, rewinders, printing presses, etc. all without stopping production. These features make the DT-735 ideal for quality inspection and preventive maintenance of automated motion equipment. Kit Contents Shimpo DT-735 Battery Powered Xenon Stroboscope Universal AC Charger Shimpo DT-735-KIT Battery Powered Xenon Stroboscope Spare Flash Tube Carrying Case Universal AC Charger Features NIST-Traceable Calibration Certificate & Test Report optionally available Includes top and bottom handle to allow user operation preference Easy-to-use controls with bright LED display Made in China 1-year warranty CE Certified Specifications Flash Range 60 - 12,000 FPM Accuracy ± 0.01% Resolution 0.1 from 60-9999; 1 from 6,001-12,000 Display 5 digits 0.4” (10 mm) height Flash Tube Xenon ≤ 45W Tube Life 50,000,000 flashes Flash Duration 10-30 μs automatically adjusts with flash rate External Trigger Input 5V ~ 12V pulse signal (high level trigger) up to 50 mA Lux Rating 8” (20 cm) Distance = 1550 lx @ 1500 fpm, 2350 lx @ 6000 fpm with 15.5” (400 mm) irradiation diameter. | 20” (50 cm) Distance = 650 lx @ 1500 fpm , 580 lx @ 6000 fpm with 23.5” (600 mm) irradiation diameter Battery Type Ni-MH Battery Life 1.5 to 2 hours depending on settings Charging Time 5 hours to full charge Power Requirement 100-240 VAC 50/60 Hz Operating Temperature 32 - 104°F ( 0 - 40°C ) Dimensions 9.8 x 4.7 x 4.7” (250 x 120 x 120 mm) Product Weight 2.75 lb (1.25 kg) Package Weight 4.1 lbs (1.86 kg) Warranty 1 year Certification CE Included Accessories Upper and Lower Handle, AC charger with cable Downloads Shimpo DT-735 Battery Powered Xenon Stroboscope - Data Sheet Shimpo DT-735 Battery Powered Xenon Stroboscope - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/shimpo-dt-735-battery-powered-xenon-stroboscope-p-1997.html Sat, 07 Jan 2023 15:35:05 +0000 USD 1997 Shimpo 997 DT-735 https://www.abqindustrial.net/store/images/shimpo-dt-735-battery-powered-xenon-stroboscope.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/other-moisture-meters-c-107_64/aqua-boy-kamiii-cocoa-moisture-meter-with-cup-electrode-p-1996.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1996 ]]>Easy to use Portable, battery-operated High accuracy and repeatability 2 Models KAMIII Measuring Range: 2-20% KAMIIIa Measuring Range: 10-34% The Aqua-Boy KAMIII Cocoa Moisture Meter with Cup Electrode is specifically designed to measure the moisture content of cocoa beans / seeds. Easy to use and highly portable, these compact meters deliver instant results with an accuracy of 0.1%. Recommended by official test and research laboratories, Aqua-Boy moisture meters are the automatic choice of industrial specialists and scientists worldwide Features Easy to use Portable, battery-operated High accuracy and repeatability Models include the Cup Electrode (50202CM) and Cable (50200CM) Specifications Measuring range KAMIII Cocoa 2%~20% | Sheanuts 2%~20% | Rice 10%~20% | Conversion to Timber 8%~60% Measuring range KAMIIIa Cocoa 10%~34% | Cocoa with high moisture levels | Cocoa shells Power 9V battery Weight 400 g Dimensions 200 x 250 x 70 mm (L x W x H) Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/other-moisture-meters-c-107_64/aqua-boy-kamiii-cocoa-moisture-meter-with-cup-electrode-p-1996.html Wed, 13 Oct 2021 18:44:46 +0000 USD 1996 Aqua-Boy 998 KAMIII https://www.abqindustrial.net/store/images/aqua-boy-kamiii-cocoa-moisture-meter-with-cup-electrode.jpg Easy to use

---

Portable, battery-operated

---

High accuracy and repeatability

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-fgc-cam-over-wrenches-p-1995.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1995 ]]>Cam-over technology ensures correct torque is applied and eliminates fastener breakage issues Poka-yoke torque wrench prevents over-torque, as a click wrench cannot Error-proofing assembly process The Mountz FGC Cam-Over Wrenches is next-generation cam-over wrench by Mountz Torque. When under- or over-torquing puts your products at risk, the FGC wrench delivers the accuracy you need. Safeguarding against fastening failures, the poka-yoke torque wrench prevents over-torque. Implementing this error-proofing wrench removes the operator's influence out of the torque equation and delivers an accurate and repeatable fastening result than a standard click type wrench. You can give Mountz FGC wrenches to any operator and have the confidence that he/she will deliver the correct torque, time after time. Mountz FGC tools stay in calibration 2X longer than the most stringent industry standard (ISO 6789). A click wrench is not a 100 % process safe and is often susceptible to over-torque results. A click wrench does not physically prevent an operator from applying additional force, he/she can unknowingly generate over-torque. Features Cam-over technology ensures correct torque is applied and eliminates fastener breakage issues Poka-yoke torque wrench prevents over-torque, as a click wrench cannot Error-proofing assembly process Safeguards against fastening failures Calibration life 2x ISO standards, unmatched by any wrench A preset wrench ideal for fastening applications where operators repeatedly assemble parts at the same torque setting A preset production torque wrench Tool is set to a designated torque value and the correct torque value is consistently applied Internal locking mechanism prevents incidental torque setting changes and ensures fastening precision and repeatability Tamper-proof internal adjustment. No external adjustment scale - must be preset using a torque analyzer Non-length dependent Non-strip ratchet head Wrench tightens in the CW direction only Coated corrosion-resistant stainless steel head Anodized aluminum handle Ergonomic cushion grip reduces discomfort, fatigue, and risk of injury Two-year unlimited warranty Lifetime guarantee against manufacturing defects Models Model Part Number American S.I. Metric Drive Size FGC-5 076565 8.9 - 44.2 lbf.in 1 - 5 N.m 10.2 - 51 kgf.cm 1/4" Sq. Dr. FGC-10D 076566 17.7 - 88.5 lbf.in 2 - 10 N.m 20.4 - 102 kgf.cm 1/4" Sq. Dr. FGC-10A 076567 17.7 - 88.5 lbf.in 2 - 10 N.m 20.4 - 102 kgf.cm 3/8" Sq. Dr. FGC-30D 076568 4.4 - 22.1 lbf.ft 6 - 30 N.m 0.6 - 3.1 kgf.m 1/4" Sq. Dr. FGC-30A 076569 4.4 - 22.1 lbf.ft 6 - 30 N.m 0.6 - 3.1 kgf.m 3/8" Sq. Dr. FGC-75 076570 11.1 - 55.3 lbf.ft 15 - 75 N.m 1.5 - 7.6 kgf.m 3/8" Sq. Dr. FGC-125 076571 18.5 - 92.2 lbf.ft 25 - 125 N.m 2.6 - 12.7 kgf.m 1/2" Sq. Dr. Downloads Mountz FGC Cam-Over Wrenches - Data Sheet Mountz FGC Cam-Over Wrenches - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-fgc-cam-over-wrenches-p-1995.html Wed, 03 Apr 2024 18:26:56 +0000 USD 1995 Mountz 998 FGC https://www.abqindustrial.net/store/images/mountz-fgc-cam-over-wrenches.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fga-adjustable-torque-screwdrivers-p-1994.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1994 ]]>Various models that range from 1.6 to 80 lbf.in. (0.18 - 14.1 N.m) Quick torque setting adjustment Converts between metric and standard units The Mountz FGA Adjustable Torque Screwdrivers is engineered and assembled in Silicon Valley. The Mountz FGA line of precision adjustable torque screwdrivers are the most advanced hand tools for high-level process and quality control. Thanks to the digital adjustable torque setting on the FGA, you can quickly switch torque values in the field or at the workstation, leading to improved productivity.  Mountz FGA tools stay in calibration 4X longer than the most stringent industry standard (ISO 6789). Engineered with a cam-over mechanism, the poka-yoke adjustable screwdriver prevents over-torque. You can give Mountz FGA tools to any operator and have the confidence that he/she will deliver the correct torque, time after time. The adjustable tool saves field service techs and manufacturers time and tooling costs by allowing them to accurately tighten critical fasteners of different sizes - all with a single tool. The preferred and certified ranges of these tools is in accordance with the requirements of ISO 6789 (+/- 6% of indicated setting). Features Various models that range from 1.6 to 80 lbf.in. (0.18 - 14.1 N.m) Quick torque setting adjustment Converts between metric and standard units. Digital torque scale provides an accurate and simplistic process to adjust the torque setting Cam-over technology ensures correct torque is applied and eliminates fastener breakage issues Poka-yoke torque screwdriver prevents over-torque Error-proofing assembly process Safeguards against fastening failures Calibration life 4x ISO standards, unmatched by any screwdriver Tool is set to a designated torque value and the correct torque value is consistently applied Locking mechanism prevents incidental torque setting changes and ensures fastening precision and repeatability Improve field service quality. Accurately tighten critical fasteners of different sizes—all with a single tool Two-year unlimited warranty Lifetime guarantee against manufacturing defects Patented secure bit locking mechanism with one-touch release can only be activated by the user for greater flexibility of applications and efficiency on the line Reduced bit wear lowers the incidence of bits falling out, which can slow production or cause product damage Ergonomic handles are designed with fewer flutes and larger recesses to make the tools easier to hold, less likely to cause hand fatigue, and makes drivers easier to clean Models Model Part Number American S.I. Metric Drive Size FGA-8 076720 1.6 - 8 lbf.in 18 - 90 cN.m 1.8 - 9.2 kgf.cm 1/4" F/Hex FGA-20 076721 2 - 20 lbf.in 22 - 226 cN.m 2.3 - 23 kgf.cm 1/4" F/Hex FGA-40 076722 4 - 40 lbf.in 0.45 - 4.5 N.m 4.6 - 46 kgf.cm 1/4" F/Hex FGA-80 076723 8 - 80 lbf.in 0.9 - 9 N.m 9.2 - 92 kgf.cm 1/4" F/Hex Downloads Mountz FGA Adjustable Torque Screwdrivers - Data Sheet Mountz FGA Adjustable Torque Screwdrivers - Instruction Manual Mountz FGA Adjustable Torque Screwdrivers - Calibration Manual Mountz FGA Adjustable Torque Screwdrivers - Battery Installation Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fga-adjustable-torque-screwdrivers-p-1994.html Tue, 02 Apr 2024 23:12:56 +0000 USD 1994 Mountz 983 FGA https://www.abqindustrial.net/store/images/mountz-fga-adjustable-torque-screwdrivers.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-positest-cmm-check-standard-concrete-p-1993.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1993 ]]>Easy-to-read digital display takes the guesswork out of analog scales Storage of 200 readings - stored readings can be viewed or downloaded Weatherproof, dustproof, and water-resistant - IP65-rated enclosure Concrete Moisture Meter non-destructively measures the moisture content of concrete in accordance with ASTM F2659 The PosiTest CMM Concrete Moisture Meter is the fast, non-destructive impedance meter ideal for inspectors looking to quickly evaluate the moisture condition in concrete slabs. Easy-to-read digital display takes the guesswork out of analog scales Storage of 200 readings - stored readings can be viewed or downloaded Innovative Hold Max and Save Mode waits for the reading to stabilize, then automatically saves it into memory Built-in threaded mounting point for the optional Telescopic Extender to ergonomically measure without bending or kneeling Weatherproof, dustproof, and water-resistant - IP65-rated enclosure Conforms to ASTM F2659 Kit Contents DeFelsko PosiTest CMM Check Standard Concrete 2 AAA batteries Instructions Check Standard Test Certificate USB cable Nylon carrying case with shoulder strap 2 year warranty Features Simple Easily collect and report measurements Ergonomic and lightweight design with durable rubberized grip for comfortable all day inspection Easy-to-read digital display takes the guesswork out of analog scales Instant measurements with no drilling required Versatile Three measurement modes: Continuous Mode constantly updates the display Hold Max Mode displays the maximum reading until saved or reset Hold Max and Save Mode waits for the reading to stabilize, then automatically saves it into memory Three available measurement scales: Moisture Content of Concrete Carbide Method Equivalent Relative Built-in 1/4"–20 threaded mounting point for the optional Telescopic Extender Durable Weatherproof, dustproof, and water-resistant—IP65-rated enclosure Nylon carrying case with shoulder strap included Two year warranty Powerful Storage of 200 readings - stored readings can be viewed or downloaded Includes free PosiSoft Desktop software for analyzing and reporting data USB port for fast, simple connection to a PC or Mac Automatically generate custom, professional PDF reports Accurate Conforms to ASTM F2659 Fast response precision sensors provide instant readings Spring loaded sensor pins provide enhanced contact on uneven concrete Includes Check Standard to verify operation Calibrated with concrete standards measured gravimetrically. Test Certificate included. Specifications Measurement Scales 0 to 6% Moisture Content of Concrete* 0 to 4% Carbide Method Equivalent 0 to 100 Relative Accuracy ± 0.5% Moisture Content of Concrete Depth of Penetration ~20 mm ~0.75” Temperature Range 5° to 40° C 40° to 105° F IP Rating 65 (dust and water jet resistance) Memory 200 readings Power 2 AAA Alkaline Batteries * This scale is calibrated using the gravimetric method (percentage of dry weight). Accessories DeFelsko CMMEXT Telescopic Extender This lightweight device increases the utility of the PosiTest CMM allowing for quick and easy concrete moisture measurements on large surfaces without the need to bend or kneel. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Downloads DeFelsko PosiTest CMM Check Standard Concrete- Data Sheet DeFelsko PosiTest CMM Check Standard Concrete- Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-positest-cmm-check-standard-concrete-p-1993.html Tue, 20 Jun 2023 17:03:45 +0000 USD 1993 DeFelsko 961 CMM https://www.abqindustrial.net/store/images/defelsko-positest-cmm-check-standard-concrete.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-fs05-tension-and-compression-force-sensors-p-1992.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1992 ]]>Mark-10 Series FS05 Tension and Compression Force Sensors Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN The Mark-10 Series FS05 Tension and Compression Force SensorsSeries FS05 force sensors measure tension and compression forces is mount directly to the crosshead of models F105, F305, F505, and F505H test frames, for a clean, integrated look. With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083 required ). Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Note: An AC1083 adapter is required to use FS05 force sensors with the following test frames: F755, F755S, F1505, and F1505S. Features NIST-traceable certificate of calibration with data is included Mount directly to crosshead of models F105, F305, F505, and F505H without any connection cables Member of the Plug & Test® family of interchangeable sensors and indicators (adapter required) Measure tension and compression force Warranty: 3 years Specifications Accuracy ± 0.1% of full scale + indicator or test frame Safe Overload 150% of full scale Weight From 1.9 to 3 lb (0.9 to 1.4 kg) Capacity x Resolution Model lbF ozF gF kgF N kN mN FS05-012 0.12 x 0.00002 2 x 0.0005 50 x 0.01 – 0.5 x 0.0001 – 500 x 0.1 FS05-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 – 1 x 0.0005 – 1000 x 0.5 FS05-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 – 2.5 x 0.001 – 2500 x 1 FS05-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 – – FS05-5 5 x 0.002 80 x 0.05 2500 x 1 2.5 x 0.001 25 x 0.01 – – FS05-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 – – FS05-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 – – FS05-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 – – FS05-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 – – FS05-200 200 x 0.1 3200 x 2 – 100 x 0.05 1000 x 0.5 1 x 0.0005 – FS05-300 300 x 0.1 4800 x 2 – 150 x 0.05 1500 x 0.5 1.5 x 0.0005 – FS05-500 500 x 0.2 8000 x 5 – 250 x 0.1 2500 x 1 2.5 x 0.001 – Accessories   F05-012 - FS05-20 FS05-50 – FS05-100 FS05-200 – FS05-500 Extension Rods G1024 G1024 G1031 Cone G1026 G1026 G1033 Chisel G1025 G1025 G1032 V-Groove G1027 G1027 G1034 Flat G1029 G1029 G1036 Hook G1028 G1038 G1035 Coupling - G1039 G1037 Related Products Mark-10 F105 / F305 / F505 / F505H Series-FAdvanced Force Test Stands Computer Controlled Force Test Frame Downloads Mark-10 Series FS05 Tension and Compression Force Sensors - Data Sheet Mark-10 Series FS05 Tension and Compression Force Sensors - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-sensors-c-101_33/mark-10-series-fs05-tension-and-compression-force-sensors-p-1992.html Tue, 02 Apr 2024 19:07:19 +0000 USD 1992 Mark-10 993 FS05 https://www.abqindustrial.net/store/images/mark-10-series-fs05-tension-and-compression-force-sensors.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-p-1991.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1991 ]]>Force Sensor Sold Separately Computer Controlled Force Test Frame Force Capacities up to 500 lbF (2.2 kN) Easily Program Multi-Step Tests The Mark-10 F105 / F305 / F505 / F505H Series-F Advanced Force Test Stands is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device. Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load. Kit Contents Mark-10 Series-F IMT Advanced Force Test Stands Control panel, mounting bracket, and hardware Mounting bracket, column end (F505H only) USB cable #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 M/F 2” extension rod #10-32 F/F coupler Adapter, 5/16-18M to #10-32F Set screw, #10-32 x 3/4” Hex nut, #10-32 (2) Power cord Allen wrench set NIST-traceable certificate of calibration, force Mark-10 Series-F IM Advanced Force Test Stands Mounting bracket, column end (F505H only) USB flash drive containing software installation files USB dongle USB cable #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 M/F 2” extension rod #10-32 F/F coupler Adapter, 5/16-18M to #10-32F Set screw, #10-32 x 3/4” Hex nut, #10-32 (2) Power cord Allen wrench set NIST-traceable certificate of calibration, force Features IntelliMESUR IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including: Limit testing to a load, break, or distance Height measurement Load holding Cycle testing Multi-step testing, utilizing any combination of the above functions Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report. From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification. Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup. Load Limit Distance Limit Break Limit Load Hold Cycle Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from: Move to load Move to distance Move to break Hold a load or position Hold a load or position Loop / cycle Datum Prompts Save current load or position Zero load or position Return to Home position Specifications Maximum travel 18.0 in / 457 mm Speed range 0.02 – 45 in/min /0.5 – 1,100 mm/min Load accuracy (% of full scale) Test frame: ±0.1% Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% Load sampling rate 20,000 Hz Data acquisition rate 1,000 Hz Speed accuracy ±0.2% of setting, virtually no variation with load Distance accuracy ±0.002 in [0.05 mm], factory-compensated at up to full load Distance resolution 0.0005 in / 0.01 mm Limit switch repeatability ±0.001 in / 0.03 mm Power Universal input 100-240 VAC, 50/60 Hz, 300W Fuse type 1.2 A, 250V, 3AG, SLO BLO Weight (test frame only) F105/F305: 60 lb / 27 kg F505/F505H: 70 lb / 32 kg Shipping weight F105/F305: 75 lb / 34 kg F505/F505H: 85 lb / 39 kg Temperature range 40 – 95°F / 5 – 35°C Humidity range up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Conformance CE Warranty 3 years Force Ranges Model Test Frame Capacity* Maximum Travel F105 100 lbF / 0.5 kN 18.0 in / 457 mm F305 300 lbF / 1.5 kN 18.0 in / 457 mm F505 500 lbF /2.2 kN 18.0 in / 457 mm F505H 500 lbF /2.2 kN 18.0 in / 457 mm *Load capacity is reduced at higher speeds, as follows: F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min Related Products Mark-10 ESM303 High Performance Motorized Test Stand Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min) USB output of force vs. time or force vs. travel (with optional travel measurement) Mark-10 Series FS05Tension and Compression Force Sensors Force Sensors for use with Series F Test Frames Capacities up to 500 lb / 2.5 kN Downloads Mark-10 Series F Advanced Force Test Stands - Brochure Mark-10 Series F Advanced Force Test Stands - Instruction Manual Mark-10 Series F / Series ESM - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-p-1991.html Tue, 02 Apr 2024 21:01:54 +0000 USD 1991 Mark-10 995 Series F https://www.abqindustrial.net/store/images/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ap-f2170-astm-f2170-accessory-pack-p-1990.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1990 ]]>The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Accessory Pack for RH testing Kit Contents 12 reusable Hygro-i2 probes 1 interface cable 1 calibration salt check 100 ¾" (19mm) hole liners Product Order Code: AP-F2170-B (for use with CMEX5 and DL-RHTX) Product Order Code: AP-F2170 (for use with CMEX2 and MRH3) Related Products Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Display Digital Tramex MRH III Moisture and Humidity Meter Moisture testing of wood, drywall, masonry, roofing and other construction materials Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface Tramex DL-RHTX Feedback DataLogger Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging Downloads Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ap-f2170-astm-f2170-accessory-pack-p-1990.html Fri, 02 Feb 2024 22:33:25 +0000 USD 1990 Tramex 1000 AP-F2170 https://www.abqindustrial.net/store/images/tramex-astm-f2170-accessory-pack.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdik-concrete-determinator-inspector-kit-p-1989.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1989 ]]>Tramex WDIK Water Damage Restoration Inspector Kit Industry: Water Damage Restoration A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 Concrete Moisture Encounter X5 allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The reusable Concrete Moisture Determinator Probe used with the CMEX5allows for in-depth moisture content probe testing within the concrete. The CMEX5 also incorporates reusable plug-in Hygro-i2 ® RH probes for in-situ testing of concrete. An infrared surface thermometer gives surface temperature and dew point conditions when used in conjunction with theCMEX5hygrometer. The Concrete Determinator Inspector Kit comes in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when using theCMEX5extension handle. Popular complementary product: AP-F2170-B ASTM F2170 Accessory Pack for RH testing; including reusable Hygro-i2 probes, hole liners, and tools. Kit Contents Tramex CMP Concrete Moisture Probe Tramex CMEX5 Concrete Moisture Encounter X5 Tramex Free App available for Android and iOS (phone not included) Tramex IRT2 Infrared Surface Thermometer Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex RHIE2 Hygro-i2 Relative Humidity Probe Tramex RHHL Hygro-i Hole Liners and Caps Tramex RHIE2 Electronic Interface Cable Tramex CALCRH Calibration Check for CME5, CMEX5 Tramex MAXMULTI Carring Case Specifications Size 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) Weight 7.9 lbs (3.6 kg) Power 2 x AA batteries, 1 x 9 volt PP3 battery Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex IRT2 Infrared Surface Thermometer: Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdik-concrete-determinator-inspector-kit-p-1989.html Sat, 27 Jan 2024 21:10:06 +0000 USD 1989 Tramex 996 CDIK https://www.abqindustrial.net/store/images/tramex-cdik-concrete-determinator-tech-kit-00.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdtk-concrete-determinator-tech-kit-p-1988.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1988 ]]>Compact Moisture Meter Kit For Measuring Surface and In Situ Moisture Content Of Concrete Floors and Slabs A Unified Quantitative Moisture Content Test Method A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 Concrete Moisture Encounter X5 allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The reusable Concrete Moisture Determinator Probe used with the CMEX5 allows for in-depth moisture content probe testing within the concrete, down to an extendable depth of up to 4" (100mm). The Concrete Determinator Tech Kit comes in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts. Kit Contents Tramex CMP Concrete Moisture Probe Tramex CMEX5 Concrete Moisture Encounter X5 Tramex Free App available for Android and iOS (phone not included) Tramex MAXMULTI Carring Case Features Specifications Size 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) Weight 6.5 lbs (2.95kg) Power 2 x AA batteries Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex CDK Concrete Determinator Moisture Probe Moisture Content for Concrete with Tramex CMEX5 and CMEX2 0 - 6.9% Moisture Content for Concrete with Tramex CME5 and CME4 0 - 6% Depth of Penetration 1 1/4” probe depth for concrete between 2” to 4” 2 1/4” probe depth for concrete between 4” to 6” 3 1/4” probe depth for concrete between 6” to 9” 4 1/4” probe depth for concrete between 9” to 11” Related Products Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Tramex CMP Concrete Moisture Probe  Designed to work in the same drill-hole made for the F2170 test Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests Downloads Tramex CDK Concrete Determinator - Data Sheet Tramex CDK Concrete Determinator - Quick Start Tramex CDK Concrete Determinator - User Guide Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdtk-concrete-determinator-tech-kit-p-1988.html Sat, 27 Jan 2024 21:03:35 +0000 USD 1988 Tramex 999 CDTK https://www.abqindustrial.net/store/images/tramex-cdtk-concrete-determinator-tech-kit-00.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdk-concrete-determinator-moisture-probe-p-1987.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1987 ]]>Providing In-Situ Moisture Content Readings In A Tramex Unified Moisture Content Test Method Extending the capabilities of the Concrete Moisture Encounter Range The Tramex Concrete Moisture Probe,The Determinator, extends the capabilities of the Tramex Concrete Moisture Encounter range, theTramex CMEX5 Concrete Moisture Encounter X5, Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter, providing in-situ Moisture Content readings in a Tramex Unified Moisture Content Test Method of quantitative Moisture Content measurements in both the top ¾ inch layer and within thebody of concrete floors and slabs down to an extendable depth of up to 4" (100mm). The Determinator is supplied in a Tramex hard case with allocated space for your Tramex Concrete Moisture meter. Kit Contents Tramex CMP Concrete Moisture Probe Tramex MAXMULTI Carring Case Features Instant and Accurate Designed to work in the same drill-hole made for the F2170 test. Eliminate confusion between in-situ Relative Humidity tests and surface Moisture Content tests. Determine if moisture is coming from below or above the concrete slab surface. Determine the type and extent of mitigation if needed. Reusable, Extendable, and requires no plastic hole liners. Can be used in conjunction with Tramex Concrete Moisture Encounters (Tramex CMEX5 Concrete Moisture Encounter X5, Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter) Specifications Size 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) Weight 5.7 lbs (2.6kg)  Construction ABS Body Concrete Moisture Probe 'The Determinator' - Measuring Range: Moisture Content for Concrete with Tramex CMEX5 and CMEX2 0 - 6.9% Moisture Content for Concrete with Tramex CME5 and CME4 0 - 6% Depth of Penetration 1 1/4” probe depth for concrete between 2” to 4” 2 1/4” probe depth for concrete between 4” to 6” 3 1/4” probe depth for concrete between 6” to 9” 4 1/4” probe depth for concrete between 9” to 11” Related Products Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Display Digital Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately  3/4" into the slab More Info Design The Concrete Moisture Probe when used with Tramex CME instruments operates on the principle that the electrical impedance of a material varies with its moisture content. The CME instrument is pressed onto the CMP cradle which is pressed onto the material surface with the pins fully compressed and the probe inserted into the pre-drilled 3/4" (19mm) hole to measure the moisture content. The electrical impedance is measured by creating a low frequency alternating electric field between the electrodes and the probe, to a depth of up to 4” (10cm). This field penetrates the material under test. The very small alternating current flowing through the field is inversely proportional to the impedance of the material. The instrument detects this current, determines its amplitude and thus derives the moisture value. Operating The Determinator cradle should be flat on the slab surface and the Tramex Concrete Moisture Meter placed and firmly pressed onto the cradle with the pins fully compressed.The probe reads from the bottom, within the body of the slab, up to the surface. Downloads Tramex CDK Concrete Determinator - Data Sheet Tramex CDK Concrete Determinator - Quick Start Tramex CDK Concrete Determinator - User Guide Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cdk-concrete-determinator-moisture-probe-p-1987.html Wed, 24 Jan 2024 18:44:16 +0000 USD 1987 Tramex 1000 CDK https://www.abqindustrial.net/store/images/tramex-cdk-concrete-determinator-00.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-industrial-mill-c-107_138_152/delmhorst-rdm-3-handheld-pin-type-wood-lumber-moisture-meter-p-1986.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1986 ]]>Delmhorst RDM-3 Handheld Pin-Type Wood / Lumber Moisture Meter Bright, clear digital display 5%-60% wood scale 0.1% MC resolution The Delmhorst RDM-3 Handheld Pin-Type Wood / Lumber Moisture Meter packed with features, and is perfect for the lumber and woodworking industries. The Delmhorst RDM-3 Handheld Moisture Meter is ideal for anyone who needs to collect and analyze key statistical information. Kit Options Delmhorst RDM-3W/CS Handheld Pin-Type Wood / Lumber Moisture Meter Delmhorst RDM-3W/CS Handheld Moisture Meter Contact Pins Carrying Case Delmhorst RDM-3/PKG Handheld Pin-Type Wood / Lumber Moisture Meter Delmhorst RDM-3/PKG Handheld Moisture Meter 26-ES electrode 496 pins Carrying Case Delmhorst RDM-3/PLUS Handheld Pin-Type Wood / Lumber Moisture Meter Delmhorst RDM-3/PLUS Handheld Moisture Meter PC/KIT software Contact Pins Carrying Case Features Bright, clear digital display 5%-60% wood scale 0.1% MC resolution Corrects for 69 individual wood species and temperature (°F and °C) Integral contact pins mounted on top of meter provide 5/16” penetration Built-in connector accepts any Delmhorst electrode Audible, adjustable alarm alerts you when your pre-selected MC has been reached Auto-shutoff timer saves battery life Store up to 1400 readings with date and time stamp View stored readings on screen Organize readings by job for easy reference Optional software lets you download readings to your computer and generate Excel reports Operating Temperature -4°to158°F (-20° - 70°C) Size: 8 ½” x 3 3/8” x 1 ¾” Weight: 11 oz Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty Accessories and Electrodes Delmhorst 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. Delmhorst 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. Delmhorst 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Delmhorst A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 7/16" penetration. Delmhorst MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. Delmhorst PC/KIT/NAV Enables you to download stored readings from the meter to a PC via infrared linking. Delmhorst 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer. Delmhorst 18-ES Similar to 26-ES, the 18-ES has a 17" steel shaft. Comes with 608 insulated pins for 3 ¼" penetration. Ideal for timber, poles, and ties. Also offered - 18-ED - with depth gauge to measure pin penetration. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications. 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Delmhorst 42-E/B T-handle electrode with 3/8" penetration and 3 ft. length to check moisture in stacks in or out of the kiln. Stickers must be at least 5/8". Also offered in a 4 1/2 ft. length as 42-EB/4-5. Delmhorst 4-E Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Downloads Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   WOODWORKING, INDUSTRIAL & MILL: Why should i use a moisture meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Delmhorst customers in the woodworking/lumber industry know that moisture content is the single most important factor affecting the quality of their products. To ensure quality, from the mill and dry kiln to the finishing floor, Delmhorst moisture meters help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade lumber cannot make a difference if moisture content goes unchecked. Are there different types of moisture meters? There are two types of moisture meters commonly used in lumber and woodworking applications. A pin-type uses two pins that penetrate into wood at the users desired depth. Pin-type meters are the only instruments that indicate the moisture conditions inside a board or a piece of wood. Using insulated pins, only the uncoated tips are exposed to the wood fiber, providing more accurate readings of moisture content at various levels of penetration. Using a pin type meter with insulated pins is still the most effective method to determine moisture gradient, which is the difference between shell and core moisture content. Pinless moisture meters read moisture closest to the source of the magnetic field, in this case, at the surface. For quickly scanning finished product, a pin-less meter is a convenient way to identify a problem area. However, a pinless meter cannot differentiate between shell and core moisture content and will not detect a moisture gradient. Also, readings provided by a pinless meters are affected by surface moisture. Please refer to the diagram below for a basic look at the difference between readings obtained from a pin-type meter compared to a surface meter. This diagram illustrates that pin-type meters and surface meters provide different information about the moisture content in a board. Each technology may be appropriate for different applications. Before choosing a meter, it is important to understand these differences in readings and choose the type of meter best suited for your particular application. How does a moisture meter work? Using the principle of electrical resistance, pin-type meters use the board as an element in a circuit by driving two pins or electrodes into it. This method works because moisture conducts electricity well and dry wood is an effective insulator. Most pinless meters use the capacitance method, which uses the relationship between the moisture content and the dielectric properties of the wood. Both the resistance and the dielectric properties of wood change in direct proportion to its moisture content, within a specific range. In what range of moisture content do pin-type meters operate? Resistance-type meters express moisture content as a percentage of the oven-dry weight of the wood. These meters work best from the range of fiber saturation point (25 to 30 percent) down to around 6 percent. Below 6 percent, it's tough to make accurate, repeatable readings because of the high electrical resistance in really dry wood. This is particulary true at low relative humidity levels, generally below 30 percent. Electrical accuracy of all Delmhorst meters is better than 0.5 percent between 6 and 12 percent moisture content; better than 1 percent between 12 and 20 percent moisture content; and better than 2 percent between 20 and 30 percent, or at fiber saturation point. You can check accuracy either through the internal check or with a Moisture Content Standard. At what moisture content level do i minimize defects? Acceptable moisture content depends on the final use of the wood. Wood for fine furniture should be dried to 6 to 8 percent in most areas of the country, with very little variation among pieces and between the shell and core. Appropriate moisture content is also climate-driven. To determine the attainable moisture content - or equilibrium moisture content (EMC) - in your part of the country, hang small, thin samples of a wood species in your shop or plant and taking daily readings. When the samples' moisture content remains constant, they have reached the equilibrium level. This level will change from season to season, but you'll know the range within which to work. (Figure III) How do i determine the distribution of moisture in a board? Here's where Delmhorst recommends the use of a pin-type moisture meter. First, to determine how the moisture is moving through a board, make a series of shell readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. The Delmhorst 26-ES electrode with insulated pins is the easiest and surest way to detect a moisture gradient. Since the 26-E pinpoints are not insulated, two or three quick readings at different levels of penetration will indicate if the board is well seasoned, or properly dried. A normal gradient usually develops from the wetter core to the drier surface, with an average reading at between 1/4 to 1/5 of the board thickness. Even non-insulated pins, which measure the wettest fibers, will provide a good indication of how the wood is drying. If you are using non-insulated pins, push the pins just about 1/16" into the surface, read the meter, and then push the pins to their full depth. For kiln-dried stock, the final reading should be between 6 and 12 percent; with your first reading about 1 percent lower. For air-dried stock, the final reading is typically between 12 and 19 percent, with the first reading between 2 and 3 percent lower. Meter readings outside of these ranges indicate that the board is poorly seasoned. Pin-less meters scan through the cross section of a board taking into account the moisture in the entire penetrated area. If there is a high concentration of moisture at the surface, the reading will be skewed to reflect this surface moisture. If the surface is dry and core moisture exists, the readings will be lower than the representative moisture levels throughout the board. Does surface moisture skew a delmhorst meter reading? Moisture caused by exposure to rain, fog or high relative humidity is easily and accurately detected with insulated pins. If you're using non-insulated pins, push them 1/16" into the wood and read the meter. Then push them to their full penetration. The meter reading should increase by 1 to 2 points, just because of the greater contact. If there is no increase, or the increase is less than 1 percent, the wood is wet on the surface and the readings are unreliable. As described in the answer to the question above, readings taken with a surface meter are affected by surface moisture, making it difficult to determine if the surface moisture is a result of standing water caused by rain, or if it is representative of the moisture content throughout the board. How many measurements does delmhorst recommend for an accurate sampling? Accuracy of the readings depends on how representative the samples are of the entire load. In an ideal situation, when all the boards in a load have the same moisture content, and the distribution in each board is uniform, only a few readings are needed. But since this ideal condition doesn't often happen, start by checking a large percentage of pieces. If the readings are within close range, it's apparent that the load is fairly uniform. For critical use, check 5 or 10 percent of the load, and be sure to look at boards from all parts of the load. Check slower drying quarter sawn boards as well as flat sawn lumber. If you can only drive pins into the edge, be sure to use the longest pins available to reach the fibers as deep as the board is thick. The Delmhorst RDM series moisture meters with data collection and statistical analysis capabilities are ideal for simplifying the entire sampling procedure and providing backup documentation. How far should i drive non-insulated pins into wood? To full depth if possible. However, at moisture levels below 10%, it is usually sufficient to make good, positive contact with the wood. At higher levels of moisture and especially if you have a steep gradient, full penetration is a must. Otherwise you can have discrepancies between meter readings and actual moisture content of as much as 5 or 6 points, especially in the range above 20 percent. For best results in such cases, use insulated pins. Do i get the same reading if i use 2-pin insulated or 4-pin non-insulated electrodes? The original Delmhorst calibration was developed with a 4-pin electrode - four non-insulated steel needles, with 5/16" penetration - in samples with uniform moisture distribution. For greatest accuracy, a small correction is necessary when using electrodes with two insulated pins. The latest Delmhorst models available are calibrated either for the 2-pin electrode only, or are programmable for both 2-pin and 4-pin electrodes. How does temperature affect the accuracy of meter readings? After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C). In field use, no correction is necessary if the wood temperature is between 50° F and 90° F. If the temperature correction is not built in the meter, use the slide rule or chart we supply with each meter. The temperature of the wood does not affect pin-less type meters, unless the lumber is frozen. Are delmhorst meters accurate on frozen lumber? As long as the wood is not frozen solid and remains conductive, a pin-type meter will give reliable readings. However, most instrumentation, unless specifically designed for extreme weather conditions, will not work well in constant sub-freezing temperatures. How do delmhorst meters correct for species variation? When using a pin-type meter, all species yield different readings at the same moisture content. This is due to the fact that the electrical characteristics of different wood species vary. Delmhorst uses the USDA standard - Douglas Fir - as the basis for all calibrations. When using a Delmhorst meter on other species, either refer to the species correction chart, or key in your species into one of our microprocessor-based meters for an automatic correction. Pinless meters also yield different readings for different species. However, instead of electrical characteristics affecting the readings, wood density affects the readings. Refer to the species correction chart enclosed with your meter to adjust the readings accordingly. Does a group species correction provide an accurate meter reading? Species corrections are most accurate when handled as an individual correction, either through the a species correction chart, or automatically, through software. While not as accurate as individual corrections, the group correction is adequate for practical purposes, as long as the correction is close to the individual factor for the species. What about exotic species or other species not on the charts? If the species correction is simply not available, you can take readings below 10 percent at face value. Any correction is so small that depending on the application; a correction may not be necessary. A good moisture meter is still valuable, even without a correction factor because you can use it to determine the equilibrium moisture content (EMC). A meter reading by itself is not always as important as allowing the wood to attain its EMC level where it won't change dimension, crack, or split. Does the glue used in plywood affect meter accuracy? In most cases, no. To verify this, use insulated pins to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the meter on plywood as you would any solid material and take the readings at face value, without species correction. What about the chemicals in treated lumber? Recent studies have shown that you can use a Delmhorst meter with confidence at the treating plant, job site, or when the wood is in service if the preservative is a "C oxide" formulation (CCA-C) widely used today. Our experience has shown that at higher moisture content levels (above 20 percent), chemically treated lumber tends to yield somewhat erratic readings. What about particleboard and other manufactured materials? Chemical additives may or may not affect meter readings. Use the meter to make qualitative, comparative readings. If greater accuracy is required, Delmhorst can help you to develop a specific calibration. How do delmhorst meters handle readings on rough-surfaced lumber and cupped boards? With a pin-type meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pin-less meters, however, need full exposure to a flat surface so their readings on some uneven surfaces may be unreliable. Are there board width limitations in using moisture meters? Board width is not a limiting factor when using a pin type moisture meter. As long as the pins make good contact, the meter can be used on anything from small dowels to wide planks. For accurate results with a pinless meter, the material you're testing must be at least the width of the scanning area on the bottom of the meter. What happens if i bring a delmhorst meter into a dry kiln? Moisture meters, like most precision instruments, are sensitive to moisture. We do not recommend taking a meter into a kiln, especially from cold surroundings. If you must, take a few minutes to warm up the meter and electrode to a maximum 100°F, so that the higher temperature and moisture levels in the kiln will not affect the meter for a few minutes. If you don't acclimate the meter, readings will be erratic at best. While Delmhorst meters are built for the harsh mill environment, continued exposure to high heat and humidity will invite corrosion and shorten the life of a meter's keypad, display and PC board components. How can i monitor moisture content during drying without going into the kiln? Use the Delmhorst Kil-Mo-Trol, a remote probe system that measures the moisture content of lumber during the drying process. Resistance probes or contact pins are located at various "stations" throughout the lumber packages to monitor shell and core or core only moisture content readings. This technique is proven for both hardwood and softwood drying, and can be used in any type of dry kiln, pre-dryer, or air-drying operation. For more information about Kil-Mo-Trol, please close this window and click on the Kil-Mo-Trol Moisture Monitor button. How does static electricity affect meter readings? In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. Depending on the conditions, any one of them can work, either alone or in combination with another. Why do meter readings not always agree? If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary. Assuming both meters are electrically correct, the difference usually can be attributed to use of different electrodes, pin penetration, and species and temperature corrections. When meters are used for lumber inspections by vendors and buyers, the two parties should have a basis for comparing readings obtained with the instruments they are using. How do i keep a delmhorst meter in good working condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-industrial-mill-c-107_138_152/delmhorst-rdm-3-handheld-pin-type-wood-lumber-moisture-meter-p-1986.html Wed, 16 Nov 2022 23:01:49 +0000 USD 1986 Delmhorst 989 RDM-3 https://www.abqindustrial.net/store/images/rdm-3-01.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hops-c-107_135_147/delmhorst-f-2000-h-moisture-meters-for-hops-p-1985.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1985 ]]>Bright, clear digital display Averages up to 100 accumulated readings Displays average and highest of accumulated readings The Delmhorst F-2000/H Moisture Meters for Hops is great for hop producers looking to enhance quality control. Kit Options Delmhorst F-2000/H Moisture Meters for Hops Meter Only Delmhorst F-2000/H/HOPS/PKG Moisture Meters for Hops 830-5 – 12” for hops Carrying case Features Bright, clear digital display Averages up to 100 accumulated readings Displays average and highest of accumulated readings Moisture Range: 8%-23% on hops and 8%-40% on alfalfa hay Built-in calibration check Audible, adjustable alarm alerts you when a pre-selected MC has been reached Size: 8” x 3” x 1 5/8” Weight: 10 oz. Rugged construction ensures years of reliable use Optional sturdy plastic carrying case 9V battery Accessories and Electrodes Delmhorst 324CAS-0065 - Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. Delmhorst MCS-44 This moisture content standard is great for verifying that your F-2000H hops moisture meter is in calibration. Delmhorst 830 Series Prods for testing standard and high density bales (requires H-4 Handle). 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” prod Delmhorst 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). Delmhorst H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. Downloads Delmhorst F-2000/H Moisture Meters for Hops - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hops-c-107_135_147/delmhorst-f-2000-h-moisture-meters-for-hops-p-1985.html Tue, 09 Apr 2024 21:43:25 +0000 USD 1985 Delmhorst 996 F-2000/H https://www.abqindustrial.net/store/images/delmhorst-f-2000hops-moisture-meters-01.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bdx-30-pin-type-moisture-meter-for-building-inspection-p-1984.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1984 ]]>Delmhorst EDGE™ app with Bluetooth® connectivity Large, custom display with auto backlight - easy to read under all conditions Species/Materials – download up to 15 into the meter out of 37 available The powerful BDX-30 brings all the design elements and functionality of the BDX-20, and also introduces Bluetooth® integration to the Navigator family with the Delmhorst EDGE™ app!This exciting addition to the meter enhances your ability to ensure precise readings from anywhere and export data including geotags and timestamps.The BDX-30 brings today’s technology from the field to the office,making the most challenging project easier, more efficient, and most accurate. Kit Options Delmhorst BDX-30w/CS Moisture Meters Individual Instrument Delmhorst BDX-30 Moisture Meters Carrying Case Delmhorst BDX-30w/CS Moisture Meters Behind The Wall Package Wood Flooring Package Delmhorst BDX-30 Moisture Meters 21-E electrode (3in penetration) Carrying Case Delmhorst BDX-30w/CS Moisture Meters Delmhorst BDX-30 Moisture Meters 26-ES hammer electrode Extra pins Carrying Case Delmhorst BDX-30w/CS Moisture Meters Contractor/EIFS Package Delmhorst BDX-30 Moisture Meters 26-ES (and extra pins) 21-E electrodes HP-1 hole punch 608-001 (7in spares for 21-E) Carrying Case Features Delmhorst EDGE™ app with Bluetooth® connectivity Large, custom display with auto backlight - easy to read under all conditions. Species/Materials – download up to 15 into the meter out of 37 available MC range: 6%-60% Wood (Douglas Fir) 0.1% -6% Drywall 0-100 Reference scale Wood temperature correction (°F/°C) Alarm set point - alerts to user-selected MC level On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Internal calibration check Pins/electrode correction (insulated or non-insulated) Integral contact pins max 5/16” penetration (use 2498/A-100) Compatible with any Delmhorst external electrode. Color-coded LED’s – adjustable through EDGE™ app Multi-language - available fall 2021 Sturdy plastic carrying case – included Power – 2x AA batteries – Alkaline Energizer included “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m QR code on meter for easy access to support materials Size: meter only - 8.65in (2.2mm) x 2.85in (72mm) x 1.55in (39mm); in carry case - 9.5in (241mm) x 6.5in (165mm) x 2.5in (64mm) Weight: meter only - 0.4.5oz (1.3g); in carry case - 18oz (510g) 2-year warranty on manufacturer’s defects. Bonus extended warranty with on-line registration. EDGE™ Bluetooth app features – available with BDX-30 only List of meter’s saved readings with timestamp and geotag Graphical capability Data export to .csv – full or selected data sets Save unlimited readings Access to expanded species/material selections Customize LED ranges Multi-languages in meter – English, Spanish, French, German, Italian, Russian Species sets for international species Use EDGE™ with smartphone or tablet. Apple App Store Google PlayStore Accessories and Electrodes Delmhorst 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. Delmhorst 2497/A-100 - pack of 24 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst 305RET-0021 - pack of 2 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. Delmhorst 632 - pack of 4 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. Delmhorst A-111- pack of 24 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 7/16" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. Delmhorst HP-1 Makes pilot holes in stucco to reduce pin damage. Delmhorst MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Delmhorst 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4".Great for use on roofs, insulation, or EIFS.21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Delmhorst 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order. Delmhorst 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst BDX Moisture Meter - Quick Start Guide Delmhorst BDX Moisture Meter - Data Sheet Delmhorst BDX Moisture Meter - Owners Manual Delmhorst BDX Moisture Meter - App User Guide Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bdx-30-pin-type-moisture-meter-for-building-inspection-p-1984.html Sat, 11 May 2024 08:57:29 +0000 USD 1984 Delmhorst 956 BDX-30 https://www.abqindustrial.net/store/images/delmhorst-bdx-30-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bdx-20-pin-type-moisture-meter-for-building-inspection-p-1983.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1983 ]]>Large, custom display with auto backlight - easy to read under all conditions Wood temperature correction (°F/°C) Alarm set point - alerts to user-selected MC level The BDX-20 is the newest in the legendary “BD Series” pin meters for the building trades.This rugged meter has an ergonomic design with an easy grip handle and large tactile buttons for comfort and usability.Equipped with a custom, LCD display and intuitive user interface, users can quickly obtain accurate readings.The BDX-20 will ensure maximum performance and reliability on every job. Kit Options Delmhorst BDX-20w/CS Moisture Meters Delmhorst BDX-20 Moisture Meters Carrying Case Delmhorst BDX-20w/CS Moisture Meters Delmhorst BDX-20 Moisture Meters 21-E electrode (3in penetration) Carrying Case Features The BDX-20 includes 3 built-in measurement scales – Wood (Doug Fir 6%-60%), Reference Scale (0-100) and Drywall (0.2%-6%) – plus all the great features of the BDX-30. It is not compatible with the EDGE™ app. Large, custom display with auto backlight - easy to read under all conditions. 3 measurement scales: 6%-60% Wood (Douglas Fir) 0.1% -6% Drywall 0-100 Reference scale Wood temperature correction (°F/°C) Alarm set point - alerts to user-selected MC level On-screen readings statistics – High, Low, Average, Standard Deviation, Last 10 Internal calibration check Pins/electrode correction (insulated or non-insulated) Integral contact pins max 5/16” penetration (use 2498/A-100) Compatible with any Delmhorst external electrode. Color-coded LED’s Sturdy plastic carrying case – included Power – 2x AA batteries – Alkaline Energizer included “Low Batt” warning with audio Auto off timer. Set to 1m, 4m or 10m QR code on meter for easy access to support materials Size: meter only - 8.65in (2.2mm) x 2.85in (72mm) x 1.55in (39mm); in carry case - 9.5in (241mm) x 6.5in (165mm) x 2.5in (64mm) Weight: meter only - 0.4.5oz (1.3g); in carry case - 18oz (510g) 2-year warranty on manufacturer’s defects. Bonus extended warranty with on-line registration. EDGE™ Bluetooth app features – available with BDX-30 only List of meter’s saved readings with timestamp and geotag Graphical capability Data export to .csv – full or selected data sets Save unlimited readings Access to expanded species/material selections Customize LED ranges Multi-languages in meter – English, Spanish, French, German, Italian, Russian Species sets for international species Use EDGE™ with smartphone or tablet. Apple App Store Google PlayStore Accessories and Electrodes Delmhorst 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. Delmhorst 2497/A-100 - pack of 24 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum. Delmhorst 305RET-0021 - pack of 2 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. Delmhorst 632 - pack of 4 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. Delmhorst A-111- pack of 24 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 7/16" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. Delmhorst HP-1 Makes pilot holes in stucco to reduce pin damage. Delmhorst MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Delmhorst 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Delmhorst 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4".Great for use on roofs, insulation, or EIFS.21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. Delmhorst 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration.22-E is also available as the 22-ET with a tapped handle for hard to reach areas Delmhorst 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order. Delmhorst 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst BDX Moisture Meter - Quick Start Guide Delmhorst BDX Moisture Meter - Data Sheet Delmhorst BDX Moisture Meter - Owners Manual Delmhorst BDX Moisture Meter - App User Guide Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bdx-20-pin-type-moisture-meter-for-building-inspection-p-1983.html Sat, 11 May 2024 08:56:32 +0000 USD 1983 Delmhorst 978 BDX-20 https://www.abqindustrial.net/store/images/delmhorst-bdx-20-moisture-meters.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-wlp-wirelink-plus-cabled-tension-load-cell-p-1982.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1982 ]]>StraightPoint WLP WireLink Plus Cabled Tension Load Cell Constructed of lightweight aluminium Overhead Weighing Cable Tensioning The StraightPoint WLP WireLink Plus Cabled Tension Load Cell is designed to be rigged with Crosby standard shackles - manufactured from aerospace grade aluminium and utilising an advanced internal design structure this range of non-indicating Load cells are extremely lightweight, easy to handle and are used worldwide in an array of industries for lifting, pulling, proof and structural load testing. Decades of development into this product include many stand out features such as our unique strain gauging method that helps compensate for wire rope torque when the Wirelink is loaded. The extremely versatile platform can be used with digital displays including the Straightpoint handheld plus, PLCs, Data Acquisition systems (DAQ) etc. and configured with a vast array of output formats to include mV/V, RS-422, RS-485, utilizing the ASCII, MODBUS RTU and CAN-BUS protocols. The Wirelink plus is supplied with a 10 metre cable as standard however usable cable length varies greatly with lengths available to 1500 metres depending on the output format. Kit Contents StraightPoint WLP WireLink Plus Cabled Tension Load Cell Proof test certificate Operator Manual Carry / Storage Case RFID Tagged 10M Cable Features Constructed of lightweight aluminium Available in capacities ranging from 1 to 300 tonnes High accuracy Multiple output options to include mV/V, analogue out, ASCII, MODBUS RTU and CAN-BUS Available with IP68 environmental protection Options for subsea use available Warranty 1-Year (FREE Extension to 2-Years with Product Registration) DNV -GL Type Approval Complies with ASME B30.26 Design validated by F.E.A. Applications Testing Overhead Weighing Loadcell Rental Bollard Pulling Tug Testing Cable Tensioning Heavy Lift Specifications Material of construction Aluminium 2014-T6, load bearing bushes EN24T Finish Black anodized to BS EN 12373-1:2001 Class 10. Bushes clear passivated MTBF to WLL Typically 50 million cycles Elongation Typically Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-wlp-wirelink-plus-cabled-tension-load-cell-p-1982.html Wed, 03 Jan 2024 23:55:46 +0000 USD 1982 Straightpoint 1000 WLP https://www.abqindustrial.net/store/images/straightpoint-wlp-wirelink-plus-cabled-tension-load-cell.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-handheld-plus-wireless-and-wired-load-cell-p-1981.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1981 ]]>Displays up to 4 load cells simultaneously Wireless range 1000m or 3280ft (ATEX 500m or 1640ft) Low battery warning The StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation is a rugged and versatile digital handheld display with a broad range of features and suitable for all Straightpoint load cell products. At the heart of the ergonomically designed Handheld plus is a powerful PCB providing industry leading features such as user selectable units of measure (tonnes, lbs, kg and kN), programmable audible overload alarm (HHP & SW-HHP), peak hold, pre-set tare and a user resettable (HHP & SW-HHP) overload counter. This crucial overload alarm counter is a requirement for many safety and quality control departments, as it keeps track of overload events, allowing the load cell in question to be removed from service immediately, following the calibration voiding overload event. The load cell in question can then be sent out for proper testing and, if necessary, recalibration before re-entering service. The HHP is suitable for connection via cable to any Straightpoint cabled load cell product and easily adapted to any other manufacturers’ load cell product with a mv/v output. In addition to the standard HHP the SW-HHP is suitable for connection to any Straightpoint wireless load cell, has a range of up to 1000m/3280ft (ATEX 700m/2300ft) and is supplied as standard with the Radiolink plus load cell. Kit Contents StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation AA Batteries Operator Manual Features Overload counter User settable 90db audible overload alarm (not ATEX) Multiple display units – tonnes, lbs, kg and kN 100Hz Peak hold Pre-set tare Unrivalled Wireless range 1000m/3280ft 2 year warranty Ideal for Radiolink Plus Wireless Load Shackle Wireless Compression Wirelink Plus Miniweigher Plus Compression Loadcell Shackle Loadcell TIMH ATEX/IECEX Specifications Part Number HHP SW-HHP SW-HHP ATEX Battery Type 2 x AA 2 x AA 2 X AA Energizer L91 Battery Life 100 hrs continuous 40 hrs continuous 60 Hours Continous Display Type  240 x 128 Multi line dot matrix with backlight  240 x 128 Multi line dot matrix with backlight 6 Digit 25mm / 1" LCD Operating Temp -10 to +50 °C / 14 to 122 ˚F -20 to +70 °C / -4 to 158 ˚F -10 to +50 °C / 14 to 122 ˚F Display Rate 3Hz 3Hz 3Hz Protection IP65 or NEMA 4X IP65 or NEMA 4X IP65 or NEMA 4X Excitation 5v N / A N / A Max Sensitivity 3 mv / v N / A N / A Max resolution 1 : 999999 (Normal Mode) 1 : 999999 (Normal Mode) 1 : 999999 (Normal Mode) Connectivity 6-way Female Binder 723 Socket Wireless 2.4 GHz Wireless 2.4 GHz Accessories Wall or Cab Mount Bracket Part Nºs SP SU3282 Crosby 2789228 Constructed from stainless steel and fitted with a viewing angle adjusting mechanism, the SU3282 bracket fits either the HHP or SW-HHP handheld displays. Ideal for wall or cab mounting, leaving the operators to work safely, hands free. External Amplifier Part Nºs SP SA-3420 Crosby 2789096 The SA-3420 external amplifier allows the operator to convert the output of any of the SP cabled load cell products into a three wire 4-20mA analogue output. The weatherproof enclosure is fitted with stainless steel glands and is suitable for connection to a PLC, data logger or other instrumentation. Handheld Rubber Boot Part Nºs SP SU4045 Crosby 2789232 Drop tested to one metre at –30°C, this 70SHA rubber boot is purpose moulded to fit and protect the HHP and SW-HHP handheld display against impact, especially when it is used in the harshest industrial environments. Downloads StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation - Data Sheet StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation - HHP Quick Guide StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation - HHP Instruction Manual StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation - SW-HHP Instruction Manual StraightPoint Handheld Plus Wireless and Wired Load Cell Instrumentation -SW-HHP Quick Guide Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-handheld-plus-wireless-and-wired-load-cell-p-1981.html Wed, 01 Dec 2021 19:41:13 +0000 USD 1981 Straightpoint 1000 HHP https://www.abqindustrial.net/store/images/straightpoint-handheld-plus-wireless-and-wired-load-cell-instrumentation.jpg Displays up to 4 load cells simultaneously

---

Wireless range 1000m or 3280ft (ATEX 500m or 1640ft)

---

Low battery warning

---

]]> https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-shackle-load-cells-loadshackles-p-1980.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1980 ]]>StraightPoint Shackle Load Cells - LoadShackles Cabled loadshackle with capacities from 3.25t to 3000t Evironmentally sealed to IP67 or NEMA6 mv/v or analog signal options Available from stock in capacities 3.25t to 400t, and available up to 3000t, Straightpoint’s Loadshackle is manufactured from Crosby’s industry-leading 2130 Carbon, 2140 Alloy Bolt Type Anchor Shackles and S2135. The Loadshackle offers reduced overall weight and headroom providing a great fit for low headroom applications. Utilising the same advanced microprocessor-based electronics as all Straightpoint products, Straightpoint’s cabled Loadshackle benefits from high sampling rates, extreme resistance to industrial level noise and unprecedented stability. A huge range of tooling allows Straightpoint to calibrate in shackle for extra accuracy, unlike many other load cell manufacturers. Straightpoint cabled Loadshackles are also environmentally sealed to IP67 and, as an option, sealed for permanent submersion for sub-sea use. The cabled Loadshackle range can be used with digital displays including the Straightpoint Handheld plus, PLCs, data acquisition systems (DAQ), etc. and configured with a vast array of output formats to include mV/V, RS-422, RS-485, utilising the ASCII, MODBUS RTU and CAN-BUS protocols or supplied with integral amplifier allowing analogue outputs such as 4-20mA, 0-10v, 0-5v etc. Whether used in heavy lifting, mooring anchor placement or sub-sea applications, Straightpoint’s cabled Loadshackle offers robust construction, advanced electronics, industry-leading resolution and accuracy all at a cost-effective, affordable price. Requires connection to Straightpoint’s Handheld plus (HHP) or External Amplifier range (SA-3420) that can be configured to provide outputs such as 4-20mA, 0-10v, 0-5v for PLC or data logger integration. Kit Contents StraightPoint Shackle Load Cells - LoadShackles Centralising Bobbin 10 metres / 30 feet Cable Proof test certificate Operator Manual Carry / Storage Crate Features Robust construction Compact size and low headroom Every Loadshackle proof tested Lightweight Unrivalled resolution Push button tare Environmentally sealed to IP67/NEMA6 Peak hold Advanced options available for subsea applications Manufactured using industry-leading brand shackles mv/v or analog signal options Advanced Options Available Complies with ASME B30.26 Design validated by F.E.A. Application Permanent installations such as cable tension monitoring Underwater or subsea load monitoring applications Under Hook Crane Weighing Aircraft Manufacturing and Repair Water Weight Testing and Calibration Structural Load Testing and Certification Shipping & receiving weighing Off Shore Mooring Anchor Setting Heavy lift and Rigging Load Monitoring Crane and Hoist Calibration and Proof Load Testing Manufacturing and Heavy Construction Bollard pull testing and Certification Catenary Anchor Leg Mooring (CALM) monitoring Hawser Tension Monitoring Order Guide Part Number Resolution Capacity Weight SLB3.25T 3.25 te - 7150lb 0.005 te - 10lb 2.8 kg - 6.16lb SLB6.5T 6.5 te - 14300lb 0.005 te - 10lb 3.2 kg - 7lb SLB12T 12 te - 26400lb 0.01 te - 20lb 8 kg - 17.6lb SLB25T 25 te - 55000lb 0.02 te - 50lb 18 kg - 40lb SLB55T 55 te - 120000lbs 0.05 te - 100lb 25 kg - 55lb SLB85T 85 te - 185000lbs 0.05 te - 100lb 45 kg - 99lb SLB120T 120 te - 260000lbs 0.1 te - 200lb 85 kg - 187lb SLB200T 200 te - 440000lbs 0.2 te - 200lb 260 kg - 573lb SLB300T 300 te - 660000lbs 0.5 te - 1000lb 405 kg - 893lb SLB400T 400 te - 880000lbs 0.5 te - 1000lb 662 kg - 1459lb Downloads StraightPoint Shackle Load Cells - LoadShackles - Data Sheet StraightPoint Shackle Load Cells - LoadShackles - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-shackle-load-cells-loadshackles-p-1980.html Wed, 01 Dec 2021 19:45:53 +0000 USD 1980 Straightpoint 1000 SBL https://www.abqindustrial.net/store/images/straightpoint-shackle-load-cells-loadshackles.jpg Cabled loadshackle with capacities from 3.25t to 3000t

---

Evironmentally sealed to IP67 or NEMA6

---

mv/v or analog signal options

---

]]> https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-745-coating-thickness-gauge-p-1979.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1979 ]]>ElektroPhysik MiniTest 745 Coating Thickness Gauge Interchangeable Probe Model Wide range of probes available Built-in memory, 10,000 data points & statistics The ElektroPhysik MiniTest 745 Coating Thickness Gauge with integrated sensor for easy, one hand operation. Devices in the ElektroPhysik MiniTest 745 Coating Thickness Gauge is our best sellers – and for good reason: they have diverse applications and deliver precise readings, all at unbeatable value for money. Digital processing of readings by the sensor for quick results Durable sensors for a long service life Diverse range of applications for measuring coating thickness up to 35mm Graphic menus and guide texts in 20 languages – ideal for use in a multi-national team Kit Contents ElektroPhysik MiniTest 745 Coating Thickness Gauge SIDSP sensor at choice Shoulder bag with belt clip Calibration set with calibration standards and zero reference plate(s) User guidance German/English/French/Spanish on CD Features Precision in coating thickness measurement of up to 15 mm / 0.59" USB and Bluetooth interfaces for data transfer to PC, mobile devices or printer Increased accuracy and reproducibility by sensor-integrated digital signal processing (SIDSP®) All sensors can be connected without cables to the MiniTest 745 device Universal probes with automatic substrate detection for quick measurements on steel and nonferrous metals Wear resistant probes with virtually unlimited life Storage for 10,000 readings (MiniTest 745: 100,000 readings) Optimal temperature compensation High precision characteristic curves with up to 50 data points in the factory calibration Integrated user guidance in 20 languages Applications A diverse range of applications from a wide variety of sensors The compact design and the variety of sensor attachments means that the coating thickness gauges MiniTest 725 / 735 / 745 can be used for the most varied measurement tasks: Measurement of small parts, thin metal bars or in grooves: ease of use due to miniature sensors with the world’s smallest measuring head (diameter: 2.5mm). Automotive bodywork: the specialist sensors have reduced sensitivity to geometric factors and the thickness of bodywork panels. Aircraft construction: particularly challenging variety alloys based on aluminium or titanium are no problem for the MiniTest 700 since it automatically compensates for varying conductivity and can take readings on different non-ferrous substrates without the need for re-calibration. Measurements in holes and hard-to-reach places: attach one of the specialised tube sensors and it’s ready to go! Corrosion protection, e.g. in large steel structures (bridge construction and ship building): the devices in the MiniTest 700 series can record high volumes of readings in situ that can be analysed later. Environments prone to high levels of dust and moisture (construction sites, shipyards, etc.): heavy duty sensors are equipped with particularly robust measuring heads that can easily withstand different environmental conditions. Thicker coatings, e.g. fireproof coatings or special coatings in pipeline construction: the F 15 sensor allows you to measure up to 15mm coating thickness on steel. Measurement on highly abrasive surfaces with high roughness depth: specialised sensors also available. The MiniTest 700 is therefore capable of overcoming almost any task in measuring coating thickness! Sensor High stability of measuring signals SIDSP® sensors’ characteristic curves feature high accuracy SIDSP® sensors provide excellent adaptability SIDSP® N and FN sensors compensate for substrate conductivity SIDSP® sensors are highly insensitive to changes in temperature SIDSP® sensors are wear-resistant Future-oriented solutions Operation and data transfer Simple and comfortable operation – as equally important as precision readings! When developing the MiniTest 700 series, we attached great importance not only to making sure that you can take precise measurements, but also to making the device extremely easy to use. The device is operated using a menu on a graphic display. Instructions and help text in 20 languages guide you through the settings. Predefined calibration processes help you to calibrate according to international standards (ISO, SSPC, etc.). And a special measurement mode is available to optimise measurement on abrasive surfaces. Data transfer is equally simple and convenient. You can transfer readings saved on the MiniTest 725/735/745 devices with complete ease to PCs, tablets or smartphones using a USB or Bluetooth connection. You can save up to 10,000 readings on the MiniTest 725 and 735 devices and up to 100,000 on the MiniTest 745. This gives you the option to record readings on site that you can then analyse and archive at a later date. The delivery of the device includes the data transfer software MSoft 7 basic. And for detailed analysis, the software can be upgraded to MSoft 7 professional. Application Non-destructive coating thickness measurement: Non-magnetic coatings like varnishes, enamels, chrome and zinc on ferromagnetic base materials (e.g. steel) Insulating coatings like varnishes and anodising aluminium on non-ferrous metals (e.g. aluminium, copper, die-cast zinc) Measuring principles Magnetic induction (F-type sensors) according to DIN EN ESO 2808, method 7C Eddy current (N-type sensors) according to DIN EN ESO 2808, method 7D Specifications Sensor embodiment internal / external changeable No. of measurement series 100 Measurement memory 100.000 Statistical functions Number of readings · Minimum · Maximum · Mean value · Standard deviation · Coefficient of variation · Single value statistics ·Block statistics (Standard or free configurable) Calibration Factory calibration · 1-pont calibration (Zero) · 2-point, 3-point calibration · Special calibration method for rough substrates · Adjustable offset Additional calibration procedures according to international standards ISO 19840:2004(E) SSPC-PA2 SS 184160 AS 3894.3 Limit monitoring Optical and acoustical signaling Measurement units metric: µm · mm · cm imperial: mils · inch · thou Data interface Bluetooth® 4.0 Bluetooth Smart® Mini-USB Printer Standard ASCII-printer ElektroPhysik Bluetooth-printer International standards DIN EN ISO 1461 · DIN EN ISO 2064 · DIN EN ISO 2178 · DIN EN ISO 2360 · DIN EN ISO 2808 · DIN EN ISO 3882 · ISO 19840 · ASTM B 244 · ASTM B 499 · ASTM D 7091 · ASTM E 376 · AS 3894.3 · SS 184160 · SSPC-PA 2 Display graphics display, adjustable lighting Power supply 2 batteries AA / LR-06 / Mignon or rechargeable NiMH cells AA / HR6 Operating temperature range -10 °C ... +60 °C / 14 °F ... 140 °F Storage temperature range -20 °C ... +70 °C / -4 °F ... 158 °F Dimensions 157 mm x 75,5 mm x 49 mm 6.18" x 2.97" x 1.93" Weight approx. 175 g / 6.2 oz Probes Sensor Type Range Uncertainty (of reading) Minimum point F 0.5M-0 F0.5M-45 F 0.5M-90 A 0.5 mm / 39 mils ± 0.5 μm (0.20 mils) + 0.75% 3 mm / 0.12" F 1.5 B/E 1.5 mm / 59 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" F 1.5-90 C 1.5 mm / 59 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" F 2 B/E 2.0 mm / 79 mils ± 1.5 μm (0.059 mils) + 0.75% 10 mm / 0.40" F 2.6 B/E 2.6 mm / 102 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" F 5 B/E 5.0 mm / 197 mils ± 1.5 μm (0.059 mils) + 0.75% 10 mm / 0.40" F 15 D 15 mm / 591 mils ± 5.0 μm (0.197 mils) + 0.75% 25mm / 1.00" N 0.7 B/E 0.7 mm / 28 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" N 0.7-90 C 0.7 mm / 28 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" N 2.5 B/E 2.5 mm / 98 mils ± 1.5 μm (0.059 mils) + 0.75% 10 mm / 0.40" N 7 D 7.0 mm / 276 mils ± 5.0 μm (0.197 mils) + 0.75% 20 mm / 0.80" FN 1.5 B/E F: 1.5 mm / 59 mils N: 0.7 mm / 28 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" FN 1.5-90 C F: 1.5 mm / 59 mils N: 0.7 mm / 28 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" FN 2.6 B/E F: 2.6 mm / 102 mils N: 1.0 mm / 39 mils ± 1.0 μm (0.039 mils) + 0.75% 5 mm / 0.20" FN 5 B/E F: 5.0 mm / 591 mils N: 2.5 mm / 98 mils ± 1.5 μm (0.059 mils) + 0.75% 10 mm / 0.40" Downloads ElektroPhysik MiniTest 745 Coating Thickness Gauge - Data Sheet ElektroPhysik MiniTest 745 Coating Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-745-coating-thickness-gauge-p-1979.html Mon, 01 Apr 2024 23:10:33 +0000 USD 1979 ElektroPhysik 998 MiniTest-745 https://www.abqindustrial.net/store/images/elektrophysik-minitest-745-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-735-coating-thickness-gauge-p-1978.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1978 ]]>ElektroPhysik MiniTest 735 Coating Thickness Gauge External Sensor connected via cable Wide range of probes available Built-in memory, 10,000 data points & statistics The ElektroPhysik MiniTest 735 Coating Thickness Gauge with external, fixed probes connected via cable. Devices in the ElektroPhysik MiniTest 735 Coating Thickness Gauge is our best sellers – and for good reason: they have diverse applications and deliver precise readings, all at unbeatable value for money. Digital processing of readings by the sensor for quick results Durable sensors for a long service life Diverse range of applications for measuring coating thickness up to 35mm Graphic menus and guide texts in 20 languages – ideal for use in a multi-national team Kit Contents ElektroPhysik MiniTest 735 Coating Thickness Gauge SIDSP sensor Shoulder bag with belt clip Calibration set with calibration standards and zero reference plate(s) User guidance German/English/French/Spanish on CD Features Precision in coating thickness measurement of up to 15 mm / 0.59″ USB and Bluetooth interfaces for data transfer to PC, mobile devices or printer Increased accuracy and reproducibility by sensor-integrated digital signal processing (SIDSP®) All sensors can be connected without cables to the MiniTest 745 device Universal probes with automatic substrate detection for quick measurements on steel and nonferrous metals Wear resistant probes with virtually unlimited life Storage for 10,000 readings (MiniTest 745: 100,000 readings) Optimal temperature compensation High precision characteristic curves with up to 50 data points in the factory calibration Integrated user guidance in 20 languages Applications A diverse range of applications from a wide variety of sensors The compact design and the variety of sensor attachments means that the coating thickness gauges MiniTest 725 / 735 / 745 can be used for the most varied measurement tasks: Measurement of small parts, thin metal bars or in grooves: ease of use due to miniature sensors with the world’s smallest measuring head (diameter: 2.5mm). Automotive bodywork: the specialist sensors have reduced sensitivity to geometric factors and the thickness of bodywork panels. Aircraft construction: particularly challenging variety alloys based on aluminium or titanium are no problem for the MiniTest 700 since it automatically compensates for varying conductivity and can take readings on different non-ferrous substrates without the need for re-calibration. Measurements in holes and hard-to-reach places: attach one of the specialised tube sensors and it’s ready to go! Corrosion protection, e.g. in large steel structures (bridge construction and ship building): the devices in the MiniTest 700 series can record high volumes of readings in situ that can be analysed later. Environments prone to high levels of dust and moisture (construction sites, shipyards, etc.): heavy duty sensors are equipped with particularly robust measuring heads that can easily withstand different environmental conditions. Thicker coatings, e.g. fireproof coatings or special coatings in pipeline construction: the F 15 sensor allows you to measure up to 15mm coating thickness on steel. Measurement on highly abrasive surfaces with high roughness depth: specialised sensors also available. The MiniTest 700 is therefore capable of overcoming almost any task in measuring coating thickness! Sensor High stability of measuring signals SIDSP® sensors’ characteristic curves feature high accuracy SIDSP® sensors provide excellent adaptability SIDSP® N and FN sensors compensate for substrate conductivity SIDSP® sensors are highly insensitive to changes in temperature SIDSP® sensors are wear-resistant Future-oriented solutions Operation and data transfer Simple and comfortable operation – as equally important as precision readings! When developing the MiniTest 700 series, we attached great importance not only to making sure that you can take precise measurements, but also to making the device extremely easy to use. The device is operated using a menu on a graphic display. Instructions and help text in 20 languages guide you through the settings. Predefined calibration processes help you to calibrate according to international standards (ISO, SSPC, etc.). And a special measurement mode is available to optimise measurement on abrasive surfaces. Data transfer is equally simple and convenient. You can transfer readings saved on the MiniTest 725/735/745 devices with complete ease to PCs, tablets or smartphones using a USB or Bluetooth connection. You can save up to 10,000 readings on the MiniTest 725 and 735 devices and up to 100,000 on the MiniTest 745. This gives you the option to record readings on site that you can then analyse and archive at a later date. The delivery of the device includes the data transfer software MSoft 7 basic. And for detailed analysis, the software can be upgraded to MSoft 7 professional. Application Non-destructive coating thickness measurement: Non-magnetic coatings like varnishes, enamels, chrome and zinc on ferromagnetic base materials (e.g. steel) Insulating coatings like varnishes and anodising aluminium on non-ferrous metals (e.g. aluminium, copper, die-cast zinc) Measuring principles Magnetic induction (F-type sensors) according to DIN EN ESO 2808, method 7C Eddy current (N-type sensors) according to DIN EN ESO 2808, method 7D Specifications Sensor embodiment External, connected via cable No. of measurement series 10 Measurement memory 10.000 Statistical functions Number of readings · Minimum · Maximum · Mean value · Standard deviation · Coefficient of variation · Single value statistics ·Block statistics (Standard or free configurable) Calibration Factory calibration · 1-pont calibration (Zero) · 2-point, 3-point calibration · Special calibration method for rough substrates · Adjustable offset Additional calibration procedures according to international standards ISO 19840:2004(E) SSPC-PA2 SS 184160 AS 3894.3 Limit monitoring Optical and acoustical signaling Measurement units metric: µm · mm · cm imperial: mils · inch · thou Data interface Bluetooth® 4.0 Bluetooth Smart® Mini-USB Printer Standard ASCII-printer ElektroPhysik Bluetooth-printer International standards DIN EN ISO 1461 · DIN EN ISO 2064 · DIN EN ISO 2178 · DIN EN ISO 2360 · DIN EN ISO 2808 · DIN EN ISO 3882 · ISO 19840 · ASTM B 244 · ASTM B 499 · ASTM D 7091 · ASTM E 376 · AS 3894.3 · SS 184160 · SSPC-PA 2 Display graphics display, adjustable lighting Power supply 2 batteries AA / LR-06 / Mignon or rechargeable NiMH cells AA / HR6 Operating temperature range -10 °C ... +60 °C / 14 °F ... 140 °F Storage temperature range -20 °C ... +70 °C / -4 °F ... 158 °F Dimensions 157 mm x 75,5 mm x 49 mm 6.18" x 2.97" x 1.93" Weight  approx. 210 g / 7.4 oz Probes Sensor Type Range Uncertainty (of reading) Minimum point F 1.5 B/E 1500 µm / 60 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" F 1.5-90 C 1500 µm / 60 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" F 2 B/E 2000 µm / 80 mils ± 1.5 µm (0.059 mils) + 0.75% 10 mm / 0.40" F 2.6 B/E 2600 µm / 100 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" F 5 B/E 5.0 mm / 200 mils ± 1.5 µm (0.059 mils) + 0.75% 10 mm / 0.40" F 15 D 15 mm / 600 mils ± 5.0 µm (0.197 mils) + 0.75% 25mm / 1.00" N 0.7 B/E 700 µm / 28 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" N 0.7-90 C 700 µm / 28 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" N 2.5 B/E 2500 µm / 100 mils ± 1.5 µm (0.059 mils) + 0.75% 10 mm / 0.40" N 7 D 7.0 mm / 276 mils ± 5.0 µm (0.197 mils) + 0.75% 20 mm / 0.80" FN 1.5 B/E F: 1500 µm / 60 mils N: 700 µm / 28 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" FN 1.5-90 C F: 1500 µm / 60 mils N: 700 µm / 28 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" FN 2.6 B/E F: 2600 µm / 100 mils N: 1000 µm / 40 mils ± 1.0 µm (0.039 mils) + 0.75% 5 mm / 0.20" FN 5 B/E F: 5.0 mm / 600 mils N: 2.5 mm / 98 mils ± 1.5 µm (0.059 mils) + 0.75% 10 mm / 0.40" Downloads ElektroPhysik MiniTest 735 Coating Thickness Gauge - Data Sheet ElektroPhysik MiniTest 735 Coating Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-735-coating-thickness-gauge-p-1978.html Mon, 01 Apr 2024 23:02:08 +0000 USD 1978 ElektroPhysik 996 MiniTest-735 https://www.abqindustrial.net/store/images/elektrophysik-minitest-735-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-725-coating-thickness-gauge-p-1977.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1977 ]]>ElektroPhysik MiniTest 725 Coating Thickness Gauge Digital processing of readings by the sensor for quick results Durable sensors for a long service life Diverse range of applications for measuring coating thickness up to 35mm The ElektroPhysik MiniTest 725 Coating Thickness Gauge with integrated sensor for easy, one hand operation. Devices in the ElektroPhysik MiniTest 725 Coating Thickness Gauge is our best sellers – and for good reason: they have diverse applications and deliver precise readings, all at unbeatable value for money. Digital processing of readings by the sensor for quick results Durable sensors for a long service life Diverse range of applications for measuring coating thickness up to 35mm Graphic menus and guide texts in 20 languages – ideal for use in a multi-national team Kit Contents ElektroPhysik MiniTest 725 Coating Thickness Gauge SIDSP sensor at choice Calibration set with calibration standards and zero reference plate(s) Instruction manual in German, English, French and Spanish on CD Two (2) AA batteries Manufacturer’s Calibration Certificate MSoft 7 basic data transfer software Features Precision in coating thickness measurement of up to 15 mm / 0.59″ USB and Bluetooth interfaces for data transfer to PC, mobile devices or printer Increased accuracy and reproducibility by sensor-integrated digital signal processing (SIDSP®) Universal probes with automatic substrate detection for quick measurements on steel and nonferrous metals Wear resistant probes with virtually unlimited life Optimal temperature compensation High precision characteristic curves with up to 50 data points in the factory calibration Integrated user guidance in 20 languages Applications A diverse range of applications from a wide variety of sensors The compact design and the variety of sensor attachments means that the coating thickness gauges MiniTest 725 can be used for the most varied measurement tasks: Measurement of small parts, thin metal bars or in grooves: ease of use due to miniature sensors with the world’s smallest measuring head (diameter: 2.5mm). Automotive bodywork: the specialist sensors have reduced sensitivity to geometric factors and the thickness of bodywork panels. Aircraft construction: particularly challenging variety alloys based on aluminium or titanium are no problem for the MiniTest 700 since it automatically compensates for varying conductivity and can take readings on different non-ferrous substrates without the need for re-calibration. Measurements in holes and hard-to-reach places: attach one of the specialised tube sensors and it’s ready to go! Corrosion protection, e.g. in large steel structures (bridge construction and ship building): the devices in the MiniTest 700 series can record high volumes of readings in situ that can be analysed later. Environments prone to high levels of dust and moisture (construction sites, shipyards, etc.): heavy duty sensors are equipped with particularly robust measuring heads that can easily withstand different environmental conditions. Thicker coatings, e.g. fireproof coatings or special coatings in pipeline construction: the F 15 sensor allows you to measure up to 15mm coating thickness on steel. Measurement on highly abrasive surfaces with high roughness depth: specialised sensors also available. The MiniTest 700 is therefore capable of overcoming almost any task in measuring coating thickness! Sensor High stability of measuring signals SIDSP® sensors’ characteristic curves feature high accuracy SIDSP® sensors provide excellent adaptability SIDSP® N and FN sensors compensate for substrate conductivity SIDSP® sensors are highly insensitive to changes in temperature SIDSP® sensors are wear-resistant Future-oriented solutions Operation and data transfer Simple and comfortable operation – as equally important as precision readings! When developing the MiniTest 700 series, we attached great importance not only to making sure that you can take precise measurements, but also to making the device extremely easy to use. The device is operated using a menu on a graphic display. Instructions and help text in 20 languages guide you through the settings. Predefined calibration processes help you to calibrate according to international standards (ISO, SSPC, etc.). And a special measurement mode is available to optimise measurement on abrasive surfaces. Data transfer is equally simple and convenient. You can transfer readings saved on the MiniTest 725/735/745 devices with complete ease to PCs, tablets or smartphones using a USB or Bluetooth connection. You can save up to 10,000 readings on the MiniTest 725 and 735 devices and up to 100,000 on the MiniTest 745. This gives you the option to record readings on site that you can then analyse and archive at a later date. The delivery of the device includes the data transfer software MSoft 7 basic. And for detailed analysis, the software can be upgraded to MSoft 7 professional. Application Non-destructive coating thickness measurement: Non-magnetic coatings like varnishes, enamels, chrome and zinc on ferromagnetic base materials (e.g. steel) Insulating coatings like varnishes and anodising aluminium on non-ferrous metals (e.g. aluminium, copper, die-cast zinc) Measuring principles Magnetic induction (F-type sensors) according to DIN EN ESO 2808, method 7C Eddy current (N-type sensors) according to DIN EN ESO 2808, method 7D Specifications Sensor embodiment fixed internal, non-changeable No. of measurement series 10 Measurement memory 10.000 Statistical functions Number of readings · Minimum · Maximum · Mean value · Standard deviation · Coefficient of variation · Single value statistics ·Block statistics (Standard or free configurable) Calibration Factory calibration · 1-pont calibration (Zero) · 2-point, 3-point calibration · Special calibration method for rough substrates · Adjustable offset Additional calibration procedures according to international standards ISO 19840:2004(E) | SSPC-PA2 | SS 184160 | AS 3894.3 Limit monitoring Optical and acoustical signaling Measurement units metric: µm · mm · cm | imperial: mils · inch · thou Data interface Bluetooth® 4.0 Bluetooth Smart® Mini-USB Printer Standard ASCII-printer ElektroPhysik Bluetooth-printer International standards DIN EN ISO 1461 · DIN EN ISO 2064 · DIN EN ISO 2178 · DIN EN ISO 2360 · DIN EN ISO 2808 · DIN EN ISO 3882 · ISO 19840 · ASTM B 244 · ASTM B 499 · ASTM D 7091 · ASTM E 376 · AS 3894.3 · SS 184160 · SSPC-PA 2 Display graphics display, adjustable lighting Power supply 2 batteries AA / LR-06 / Mignon | or rechargeable NiMH cells AA / HR6 Operating temperature range -10 °C ... +60 °C / 14 °F ... 140 °F Storage temperature range -20 °C ... +70 °C / -4 °F ... 158 °F Dimensions 157 mm x 75,5 mm x 49 mm | 6.18" x 2.97" x 1.93" Weight approx. 175 g / 6.2 oz Probes F 1.5 1.5 mm / 59 mils ± 1.0 μm + 0.75% 5 mm / 0.20" F 2 2.0 mm / 79 mils ± 1.5 μm + 0.75% 10 mm / 0.40" F 2.6 2.6 mm / 102 mils ± 1.0 μm + 0.75% 5 mm / 0.20" F 5 5.0 mm / 197 mils ± 1.5 μm + 0.75% 10 mm / 0.40" F 15 15 mm / 591 mils ± 5.0 μm + 0.75% 25 mm / 1.00" N 0.7 0.7 mm / 28 mills ± 1.0 μm + 0.75% 5 mm / 0.20" N 2.5 2.5 mm / 98 mils ± 1.5 μm + 0.75% 10 mm / 0.40" N 7 7.0 mm / 276 mils ± 5.0 μm + 0.75% 20 mm / 0.80" FN 1.5 F: 1.5 mm / 59 mils N: 0.7 mm / 28 mils ± 1.0 μm + 0.75% 5 mm / 0.20" FN 2.6 F: 2.6 mm / 102 mils N: 1.0 mm / 39 mils ± 1.0 μm + 0.75% 5 mm / 0.20" FN 5 F: 5.0 mm / 197 mils N: 2.5 mm / 98 mils ±1.5 μm + 0.75% 10 mm / 0.40" Downloads ElektroPhysik MiniTest 725 Coating Thickness Gauge - Data Sheet ElektroPhysik MiniTest 725 Coating Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-725-coating-thickness-gauge-p-1977.html Mon, 01 Apr 2024 22:59:41 +0000 USD 1977 ElektroPhysik 1000 MiniTest-725 https://www.abqindustrial.net/store/images/elektrophysik-minitest-725-coating-thickness-gauge.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-mt-200-combination-contact-non-contact-pocket-tachometer-p-1976.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1976 ]]>Shimpo MT-200 Combination Contact / Non-Contact Pocket Tachometer Multiple measurement types in both contact or non-contact modes: total revolutions (rev); revolutions per minute (rpm); surface speed: m/min, y/min, ft/min, in/min; and length: meters, yards, feet and inches Non-contact measurements up to 23.6” (60 cm) away The Shimpo MT-200 Combination Contact/Non-Contact Pocket Tachometer with microprocessor technology possesses the precision of the standard SHIMPO Tachometer line, yet within a compact, pocket-style enclosure. These battery-operated tachometers feature the same rugged, high quality components that have made SHIMPO tachometers the benchmark in the industry. The MT-200 provides users with the capabilities of measuring and recording speeds of rotational, linear and surface plus total length in both contact or non-contact modes. The user-friendly, value-packed units feature memory storage; quick selection unit’s button; length functions; retrieval of last, maximum and minimum values; plus each unit comes standard with a free N.I.S.T. calibration certificate. Each unit ships in a protective carrying case which includes a cone adapter, funnel adapter and 6” circumference wheel Kit Contents Shimpo MT-200 Combination Contact / Non-Contact Pocket Tachometer Cone adapter Contact adapter Funnel adapter Master wheel (6” cir.) Reflective tape NIST certificate Three AA Batteries Carrying case 1 Year Warranty Features Multiple measurement types in both contact or non-contact modes: total revolutions (rev); revolutions per minute (rpm); surface speed: m/min, y/min, ft/min, in/min; and length: meters, yards, feet and inches Non-contact measurements up to 23.6” (60 cm) away Compact, pocket-size design fits easily in the palm of the hand Memory automatically stores minimum, maximum and last. Plus, 10 user stored readings of the process can also be recorded Long battery-life enables continuous operation Instant conversion of units Low battery and over range indication NIST calibration certificate included with every unit Specifications Display Range RPM Non-Contact: 6.0 – 99,999 RPM Contact: 6.0 – 25,000 RPM Revolutions (total) Non-Contact & Contact: 1 – 99,999 Speed Using 6” Cir. Wheel: meters/min: 0.1 – 3,809.8; yards/min: 1.0 – 4,166.4; inch/min: 36 – 99,999; feet/min: 3.0 – 12,499 Length Using 6” Cir. Wheel: meters: 0.2 – 99,999; yards: 0.2 – 99,999; feet: 0.5 – 99,999 Accuracy Revolution: 6.0 – 599.9 rpm: ±1 rpm ; 600 – 99,999 rpm: ±0.006% ±0.5 digit Surface Speed, Length: ±0.4% ±1 digit Display 5 digit 0.47” (12 mm) high LCD Memory System Readings are stored in memory and retained for 5 minutes (last, max., min., and 10 user logged measurements) Detection Laser diode Update Time 1 second (typical) Over Range Indicator Flashing numerals Power Requirement 3 AA 1.5V batteries Operating Temperature 32° – 113°F (0° – 45°C) Construction ABS Resin housing Product Weight 0.35 lb (160 g) 0.46 lb ( 210 g) With contact adapter installed Package Weight 0.85 lb (386 g) Dimensions Main unit: 4.55”L x 2.52”W x 1.24”H (115.5 mm x 64 mm x 31.5 mm) Overall Length with contact adapter: 5.9” (149 mm) Downloads Shimpo MT-200 Combination Contact / Non-Contact Pocket Tachometer - Data Sheet Shimpo MT-200 Combination Contact / Non-Contact Pocket Tachometer - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-mt-200-combination-contact-non-contact-pocket-tachometer-p-1976.html Fri, 17 May 2024 19:53:26 +0000 USD 1976 Shimpo 1000 MT-200 https://www.abqindustrial.net/store/images/mt-200-sh-combination-contact-non-contact-pocket-tachometer.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-mt-100-contact-pocket-tachometers-p-1975.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1975 ]]>Shimpo MT-100 Contact Pocket Tachometers Multiple measurement types: total revolutions (rev); revolutions per minute (rpm); surface speed: m/min, y/min, in/min, ft/min; and length: meters, yards, feet and inches Compact, pocket-size design fits easily in the palm of the hand The Shimpo MT-100 Contact Pocket Tachometers with microprocessor technology possesses the precision of the standard SHIMPO Tachometer line, yet within a compact, pocket-style enclosure. The MT-100 provides users with the capabilities of measuring and recording speeds of rotational, linear and surface plus total length. These battery-operated tachometers feature the same rugged, high quality components that have made SHIMPO tachometers the benchmark in the industry. The user-friendly, value-packed units feature memory storage; quick selection unit’s button; length functions; retrieval of last, maximum and minimum values; plus each unit comes standard with a free N.I.S.T. calibration certificate. Each unit ships in a protective carrying case which includes a cone adapter, funnel adapter and 6” circumference wheel Kit Contents Shimpo MT-100 Contact Pocket Tachometers Cone adapter Funnel adapter Master wheel (6” cir.) NIST certificate Three AA Batteries Carrying case 1 Year Warranty Features Multiple measurement types: total revolutions (rev); revolutions per minute (rpm); surface speed: m/min, y/min, in/min, ft/min; and length: meters, yards, feet and inches Compact, pocket-size design fits easily in the palm of the hand Memory automatically stores minimum, maximum and last. Plus, 10 user stored readings of the process can also be recorded Long battery-life enables continuous operation Instant conversion of units Low battery and over range indication NIST calibration certificate included with every unit Specifications Display Range Revolutions: 1.0 – 25,000 RPM , 0.1 – 99,999 Rev. (total) Speed Using 6” Cir. Wheel: meters/min: 0.1 – 3,809.8; yards/min: 1.0 – 4,166.4; inch/min: 3 – 99,999; feet/min: 0.2 – 12,499 Length Using 6” Cir. Wheel: meters: 0.01 – 99,999; yards: 0.01 – 99,999; feet: 0.1 – 99,999; inch: 1 – 99,999 Accuracy Revolution: 1.0 – 599.9 rpm: ±1 rpm, 600 – 25,000 rpm: ±0.006% ±0.5 digit Surface Speed, Length: ±0.4% ±1 digit Display 5 digit 0.47” (12 mm) high LCD Memory System Readings are stored in memory and retained for 5 minutes (last, max., min., and 10 user logged measurements) Detection Optical coupler, 20 pulses/rev. Update Time 1 second (typical) Over Range Indicator Flashing numerals Power Requirement 3 AA 1.5V batteries Operating Temperature 32° – 113°F (0° – 45°C) Construction ABS Resin housing Product Weight 0.37 lb (170 g) Package Weight 0.80 lb (363 g) Dimensions 4.83”L x 2.52”W x 1.24”H (122.5 mm x 64 mm x 31.5 mm) Downloads Shimpo MT-100 Contact Pocket Tachometers - Data Sheet Shimpo MT-100 Contact Pocket Tachometers - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/shimpo-mt-100-contact-pocket-tachometers-p-1975.html Fri, 17 May 2024 19:52:42 +0000 USD 1975 Shimpo 1000 MT-100 https://www.abqindustrial.net/store/images/mt-100-contact-pocket-tachometer.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-stdz-zero-plates-p-1974.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1974 ]]>DeFelsko STDZ Zero Plates Zero Plates are available as uncoated precision machined steel or aluminum (6061-T6) in a variety of plate sizes. Use with Certified Coated Metal Standards DeFelsko STDZ Zero Plates are available as uncoated precision machined steel or aluminum (6061-T6) in a variety of plate sizes. Use with Certified Coated Metal Standards Coated Metal Standards for magnetic and eddy current gages usually include an uncoated zero plate. The first gage measurement is taken on the zero plate to verify that the gage measures zero correctly. If not, electronic gages can usually be adjusted to "0" on the zero plate. After this adjustment is performed, the gage should measure within tolerance on the coated standards. Use with certified and non-certified plastic shims and polystyrene blocks A zero plate provides a convenient base onto which plastic shims and polystyrene blocks can be placed for verification purposes. Check zero, adjust to "0" if necessary, then place the shim/block on the zero plate and measure. Substitute as a base for materials without a substrate Zero plates can be used to provide a substrate where none exists. Large sheets of material such as paper, plastic, fabric and rubber can be measured with a coating thickness gage by placing the material over the zero plate. This is useful when the measured item is too large to access with a micrometer or other device. For example the screen printing industry uses zero plates to measure the thickness of the "substrate" being printed. Order Guide Order Code Ideal for Type Plate Size STDZSTL PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS, FNDS, F microprobesPosiTest DFT Ferrous Combo Steel Small DiskDiameter: 38 mm (1.5") STDZALM PosiTector 6000 N, NS, NAS, NRS, FN, FNS, FNRS, FNDS, N microprobesPosiTest DFT Combo Aluminum Small DiskDiameter: 38 mm (1.5") STDZSTLM PosiTector 6000 FT, FTS, FTRS, FNTS, FKS, FHXS probes Steel Medium Square100 mm x 100 mm x 6 mm (4" x 4" x 0.25") STDZALMM PosiTector 6000 FNTS, NKS probes Aluminum Medium Square100 mm x 100 mm x 6 mm (4" x 4" x 0.25") STDZSTLL PosiTector 6000 FLS, FJS, FNGS probes Steel Large Square180 mm x 180 mm x 6 mm (7" x 7" x 0.25") Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-stdz-zero-plates-p-1974.html Tue, 20 Jun 2023 16:09:48 +0000 USD 1974 DeFelsko 976 STDZ https://www.abqindustrial.net/store/images/defelsko-stdz-zero-plates.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-calibration-equipment-c-101_95/ia-torque-drive-insert-adapters-sleeve-reducers-p-1973.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1973 ]]>Torque Drive Insert Adapters / Reducers Square drive insert adapters designed to reduce torque transducer drive sizes Our line of square drive insert adapters are designed to reduce torque transducer drive size for use testing tools with a smaller drive. Features Constructed from chromoly Magnetic flange keeps adapter secure Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-calibration-equipment-c-101_95/ia-torque-drive-insert-adapters-sleeve-reducers-p-1973.html Sat, 10 Apr 2021 21:17:55 +0000 USD 1973 976 IA https://www.abqindustrial.net/store/images/ia-torque-drive-insert-adapters.jpg Torque Drive Insert Adapters / Reducers

---

Square drive insert adapters designed to reduce torque transducer drive sizes

---

]]> https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/checkline-dcd-certified-durometer-test-disks-p-1972.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1972 ]]>Durometer Accessories Certified Durometer Test Disks for checking durometer indentor extension The DCD Certified Durometer Test Disks are designed for checking durometer indentor extension. They are sold as a kit with 4 check points (20, 40, 60 & 80) or a single ring (20). The kit includes a base disk to provide a solid surface base. A calibration certificate is included. Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/checkline-dcd-certified-durometer-test-disks-p-1972.html Thu, 29 Jul 2021 15:49:43 +0000 USD 1972 Checkline https://www.abqindustrial.net/store/images/dcd-certified-durometer-test-disks.jpg Durometer Accessories

---

Certified Durometer Test Disks for checking durometer indentor extension

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/gedore-quickset-adjustable-torque-screwdriver-p-1971.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1971 ]]>Gedore Quickset Adjustable Torque Screwdriver Adjustable Torque Limiting Screwdriver for Production The bi-directional cam "slips free" once the set torque has been reached making over-tightening impossible Micrometer adjustment allows for accurate tool setting The Gedore Quickset Adjustable Torque Screwdrivers achieve accurate torque application by eliminating both under and over tightening using Gedore Torque’s proven slipping technology. This enables any user to deliver the correct torque with confidence regardless of task and operator skill level. Fast and accurate to set, using the quick and clear to read micrometer setting scale. A visible scale allows the user to adjust the tool to their desired torque setting, enabling a range of different torque settings to be applied Each single Adjustable Torque Screwdriver can cover a broad variety of applications due to their wide torque range Long service life is provided through the durable design utilizing hard-wearing materials such as stainless steel and aluminum. Increased operator comfort and productivity, from the smooth reset action of the tool and the ergonomic design Features Includes Traceable Calibration Certificate (Traceable to UKAS) Accuracy +/- 6% of reading ISO 6789 Classification 2D Precision radial ball clutch and cam allows for automatic resetting Ranges Part Number Model Range Graduations Drive Weight (g) Length 016040 Quickset Minor Metric FH 20-120 cN.m 1 cN.m 1/4" F Hex 165 169 016060 Quickset Minor Imp FH 20-120 ozf.in 1 ozf.in 1/4" F Hex 165 169 016070 Quickset Minor lbf.in FH 2-12 lbf.in 0.1 lbf.in 1/4" F Hex 165 169 016500 Quickset 6 FH 1-6 N.m 0.1 N.m 1/4" F Hex 335 184 016600 Quickset 50 FH 5-50 lbf.in 1 lbf.in 1/4" F Hex 335 184 016700 Quickset 9 FH 4-9 N.m 0.1 N.m 1/4" F Hex 335 184 016800 Quickset 80 FH 30-80 lbf.in 1 lbf.in 1/4" F Hex 335 184 016011 Quickset Minor DS 20-120 cN.m / 20-120 ozf.in 1 cN.m 1/4" F Hex 158 160 016550 Quickset 6 DS 1-6 N.m / 5-50 lbf.in 0.1 N.m 1/4" F Hex 340 169 Downloads Gedore Quickset Adjustable Torque Screwdriver - Data Sheet Gedore Quickset Adjustable Torque Screwdriver - Instruction Manual Gedore Quickset Adjustable Torque Screwdriver - Folder Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/gedore-quickset-adjustable-torque-screwdriver-p-1971.html Wed, 03 Apr 2024 03:15:06 +0000 USD 1971 Gedore 1000 Quickset https://www.abqindustrial.net/store/images/gedore-quickset-adjustable-torque-screwdriver.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-ez-torq-iii-torque-analyzer-p-1970.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1970 ]]>An ISO 17025 certified torque analyzer used for calibrating and testing small hand screwdrivers, most wrenches, and power tools Quick and easy-to-use torque analyzer to verify a tool’s performance on the assembly line Integer a nibh scelerisque, convallis velit non, dignissim felis The Mountz EZ-TorQ III Torque Analyzer is easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy validation of different ranges as needed. Highly portable and user friendly, this battery-powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smartphone like touch-screen interface breaks down barriers and ensures quick and easy torque tool validation and calibration. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyzer is ideal for all small hand tools & non-impacting power tools. Kit Contents Mountz EZ-TorQ III Torque Analyzer 1/4 Female Sq. Dr. x 17mm Male Hex Adapter 2 screw run down adapters Universal Charger Case Features An ISO 17025 certified torque analyzer used for calibrating and testing small hand screwdrivers, most wrenches, and power tools Quick and easy-to-use torque analyzer to verify a tool’s performance on the assembly line Ensure proper torque is being applied and tools maintain conformity with quality standards Instant verification that a tool is still in or out of calibration. Daily or weekly verification in the assembly area Features a built-in Li-ion rechargeable battery Portable torque tester Vivid full color, smartphone-like touchscreen interface Virtually unlimited data point storage with swappable SD card memory Sophisticated onboard software with SPC analysis Ability to analyze and create statistical data Ability to capture and store data Multi-language operation (English, Spanish, French, German, Chinese or Portuguese) Mountz EZ-TorQ III Data Streamer. Ability to analyze data and calculate statistical data Creates a historical record of your torque readings Documentation solution Order Guide Part Number 070810 070811 070812 070813 070814 Model EZ-TorQ III 10i EZ-TorQ III 50i EZ-TorQ III 100i EZ-TorQ III 150i EZ-TorQ III 300i American 1 - 10 lbf.in 5 - 50 lbf.in 10 - 100 lbf.in 15 - 150 lbf.in 30 - 300 lbf.in S.I. 11.3 - 113 cN.m 56.5 - 565 cN.m 113 - 1130 cN.m 169.5 - 1695 cN.m 339 - 3390 cN.m Metric 1.2 - 111.5 kgf.cm 5.8 - 57.6 kgf.cm 11.5 - 115 kgf.cm 173 - 17.3 kgf.cm 34.5 - 345 kgf.cm Drive Size 17mm F/Hex 17mm F/Hex 17mm F/Hex 17mm F/Hex 17mm F/Hex Downloads Mountz EZ-TorQ III Torque Analyzer - Data Sheet Mountz EZ-TorQ III Torque Analyzer - Instruction Manual Mountz EZ-TorQ III Torque Analyzer - Parts List Mountz EZ-TorQ III Torque Analyzer - Battery Safety Document Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-ez-torq-iii-torque-analyzer-p-1970.html Wed, 03 Apr 2024 14:08:45 +0000 USD 1970 Mountz 1000 EZ-TorQ-III https://www.abqindustrial.net/store/images/mountz-ez-torq-iii-torque-analyzer.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-mtm-manual-torque-multipliers-p-1969.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1969 ]]>Mountz MTM Manual Torque Multipliers Precision tightening for heavy duty fastening connections Portable, compact and lightweight Ideal for remote locations where no source of power is available The Mountz MTM Manual Torque Multipliers is a low cost solution that's ideal for wheel nuts and remote locations where air and electricity aren’t easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries. Kit Contents Mountz MTM-15 Manual Torque Multipliers Reaction Bar (L = 380mm) Reaction 90° Base Reaction 90° Bar Plastic Case Mountz MTM-27 Manual Torque Multipliers Reaction Bar (L = 380mm) Reaction 90° Base Reaction 90° Bar Plastic Case Features Precision tightening for heavy duty fastening connections Commonly used in construction, heavy equipment and power generation industries Portable, compact and lightweight Constructed with quality steel and matted finish Torque Multiplication Ratio - low energy input with high torque output For operation in combination with a torque wrench Ideal for remote locations where no source of power is available Accuracy better than ± 5% Order Guide Model MTM-15 MTM-27 Part Number 215026 215027 American 170 - 1105 lbf.ft 559 - 2000 lbf.ft S.I. 231 - 1500 N.m 758 - 2700 N.m Metric 23.6 - 153 kgf.m 77.3 - 275.4 kgf.m Torque Multiplication 6.5:1 3.3:1 Input Drive 1/2 F/Sq 3/4 F/Sq Output Drive 3/4 M/Sq 1 M/Sq Downloads Mountz MTM Manual Torque Multipliers - Data Sheet Mountz MTM-15 Manual Torque Multipliers - Instruction Manual Mountz MTM-27 Manual Torque Multipliers - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-mtm-manual-torque-multipliers-p-1969.html Mon, 12 Dec 2022 16:14:43 +0000 USD 1969 Mountz 1000 MTM https://www.abqindustrial.net/store/images/mountz-mtm-manual-torque-multipliers.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-spring-rda-run-down-adapters-p-1968.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1968 ]]>Designed to provide consistent and reliable torque readings for use with power driven torque control tools Compact size and lightweight The Mountz Spring RDA - Run Down Adapters is designed only for EZ-TorQ analyzer. These units provide consistent and reliable torque readings for use with power driven torque control tools. The RDA reduces the impact and irregular peaks that cause poor repeatability. The run down adapter is mounted in-line between the tool drive and transducer. Features Designed to provide consistent and reliable torque readings for use with power driven torque control tools Adapter is mounted in-line between tool drive and transducer Compact size and lightweight Operates in clockwise direction only. After each run down, the RDA should be completely backed-up Compatible with only the EZ-TorQ II Analyzer Order Guide Item Name Spring RDA-10i Spring RDA-50i Spring RDA-100i Spring RDA-150i Part Number 070600 070605 070610 070615 American 1 - 10 lbf.in 5 - 50 lbf.in 10 - 100 lbf.in 15 - 150 lbf.in S.I. 11.3 - 113 cN.m 56.5 - 565 cN.m 113 - 1130 cN.m 169.5 - 1695 cN.m Metric 1.2 - 11.5 kgf.cm 5.8 - 57.6 kgf.cm 11.5 - 115 kgf.cm 17.3 - 173 kgf.cm Input Drive 5mm Hex 6mm Hex 6mm Hex 6mm Hex Output Drive 17mm Hex 17mm Hex 17mm Hex 17mm Hex Downloads Mountz Spring RDA - Run Down Adapters - Data Sheet Mountz Spring RDA - Run Down Adapters - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-spring-rda-run-down-adapters-p-1968.html Wed, 03 Apr 2024 03:12:14 +0000 USD 1968 Mountz 1000 RDA https://www.abqindustrial.net/store/images/mountz-spring-rda-spring-run-down-adapters.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fg-preset-torque-screwdriver-p-1967.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1967 ]]>Mountz FG Preset Torque Screwdriver Preset precision hand torque screwdrivers from .8 lbf.in – 125 lbf.in (9 cN.m – 14.1 N.m) Sleek and ergonomic design provides unmatched comfort Industry leading warranty: 2 years unconditional. Lifetime against defects The Mountz FG Preset Torque Screwdriver is engineered to give the operator the correct torque time after time. Designed for fastening applications where errors simply aren't acceptable, the FG preset torque screwdrivers applies the right amount of torque every time. Preset hand torque screwdrivers are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting. Built with a cam-over design, the accurate screwdriver prevents a fastener or bolt from being under and over tightened. As a quality control tool, the screwdriver allows any user to deliver the correct torque with confidence regardless of task and operator skill level. Using a quality torque screwdriver ensures that proper torque is being applied and maintains requirements associated with ISO quality standards. The torque screwdriver is pre-set to the required torque value of the application. A preset torque screwdriver does not feature an external adjustment scale. These tools have an internal adjustment mechanism for setting the torque value and must be preset internally using a hex key and a torque tester. However, if the torque specification changes or a new project requires a different torque setting, the preset torque screwdriver is still flexible enough that a new torque setting can be set internally using a torque analyzer. The preferred and certified ranges of these tools is in accordance with the requirements of ISO 6789 (+/- 6% of indicated setting). Features Preset precision hand torque screwdrivers from .8 lbf.in – 125 lbf.in (9 cN.m – 14.1 N.m) Smooth cam-over poka-yoke function prevents over-torque and delivers the highest level of performance available Sleek and ergonomic design provides unmatched comfort Calibration cycles 4X longer than the most stringent industry standard (ISO 6789) Industry leading warranty: 2 years unconditional. Lifetime against defects Order Guide Model Item Name / Number Label Color American S.I. Drive Size FG-8i 076546 Blue 0.8 - 8 lbf.in 9 - 90 cN.m 1/4" F/Hex FG-8i 076551 Red 0.8 - 8 lbf.in 9 - 90 cN.m 1/4" F/Hex FG-8i 076556 Green 0.8 - 8 lbf.in 9 - 90 cN.m 1/4" F/Hex FG-8i 076561 Gold 0.8 - 8 lbf.in 9 - 90 cN.m 1/4" F/Hex FG-20i 076547 Blue 2 - 20 lbf.in 22 - 226 cN.m 1/4" F/Hex FG-20i 076552 Red 2 - 20 lbf.in 22 - 226 cN.m 1/4" F/Hex FG-20i 076557 Green 2 - 20 lbf.in 22 - 226 cN.m 1/4" F/Hex FG-20i 076562 Gold 2 - 20 lbf.in 22 - 226 cN.m 1/4" F/Hex FG-40i 076548 Blue 4 - 40 lbf.in 0.4 - 4.5 N.m 1/4" F/Hex FG-40i 076553 Red 4 - 40 lbf.in 0.4 - 4.5 N.m 1/4" F/Hex FG-40i 076558 Green 4 - 40 lbf.in 0.4 - 4.5 N.m 1/4" F/Hex FG-40i 076563 Gold 4 - 40 lbf.in 0.4 - 4.5 N.m 1/4" F/Hex FG-125i 076549 Blue 25 - 125 lbf.in 2.8 - 14.1 N.m 1/4" F/Hex FG-125i 076554 Red 25 - 125 lbf.in 2.8 - 14.1 N.m 1/4" F/Hex FG-125i 076559 Green 25 - 125 lbf.in 2.8 - 14.1 N.m 1/4" F/Hex FG-125i 076564 Gold 25 - 125 lbf.in 2.8 - 14.1 N.m 1/4" F/Hex Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/mountz-fg-preset-torque-screwdriver-p-1967.html Tue, 02 Apr 2024 22:38:29 +0000 USD 1967 Mountz 975 FG https://www.abqindustrial.net/store/images/fg-preset-torque-screwdriver-img.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-aura-auto-reversing-run-down-p-1966.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1966 ]]>Mountz AURA Auto Reversing Run Down Ideal for testing and recording the results of power tools with a torque analyzer or sensor Compact size and lightweight Includes two springs to cover the torque range 1 - 50 lbf.in The Mountz AURA Auto Reversing Run Down is adapters are designed to provide consistent and reliable torque readings for use with power driven torque control tools. The AURA reduces the impact and irregular peaks that cause poor repeatability. The run down adapter is mounted in-line between the tool drive and transducer. Features Ideal for testing and recording the results of power tools with a torque analyzer or sensor. Not recommended for pulse tools Operates in clockwise direction only. Once the tool shuts off, the AURA automatically unwinds for the next run down Eliminates the need to back it out Designed to provide consistent and reliable torque readings for use with power driven torque control tools Adapter is mounted in-line between tool drive and transducer Compact size and lightweight Includes two springs to cover the torque range 1 - 50 lbf.in Ranges Item Name AURA 50i 17mm AURA 50i Part Number 063292 063293 American 1 - 50 lbf.in 1 - 50 lbf.in S.I. 11.3 - 565 cN.m 11.3 - 565 cN.m Metric 1.2 - 57.6 kgf.cm 1.2 - 57.6 kgf.cm Input Drive 1/4 F/Sq 1/4 F/Sq Output Drive 17mm Hex 1/4 M/Sq Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mountz-aura-auto-reversing-run-down-p-1966.html Mon, 12 Dec 2022 16:16:37 +0000 USD 1966 Mountz 1000 AURA https://www.abqindustrial.net/store/images/mountz-aura-auto-reversing-run-down.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-oeh-open-end-heads-for-tbih-torque-wrench-p-1965.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1965 ]]>Open-End Heads For Mountz TBIH Break-Over Designed to work with Mountz TBIH Break-Over Torque Wrench Features English and Metric Sizes Order Guide Part Number Model Wrench Head Size 068115 Open End Head TBIH 5/64 5/64" 068100 Open End Head TBIH 1/8 1/8" 068180 Open End Head TBIH 9/64 9/64" 068101 Open End Head TBIH 5/32 5/32" 068102 Open End Head TBIH 3/16 3/16" 068314 Open End Head TBIH 13/64 13/64" 068103 Open End Head TBIH 7/32 7/32" 068215 Open End Head TBIH 15/64 15/64" 068104 Open End Head TBIH 1/4 1/4" 068105 Open End Head TBIH 9/32 9/32" 068106 Open End Head TBIH 5/16 5/16" 068107 Open End Head TBIH 11/32 11/32" 068108 Open End Head TBIH 3/8 3/8" 068098 Open End Head TBIH 13/32 13/32" 068109 Open End Head TBIH 7/16 7/16" 068110 Open End Head TBIH 1/2 1/2" 068111 Open End Head TBIH 9/16 9/16" 068112 Open End Head TBIH 5/8 5/8" 068114 Open End Head TBIH 11/16 11/16" 068113 Open End Head TBIH 3/4 3/4" 068099 Open End Head TBIH 13/16 13/16" 068042 Open End Head TBIH 7/8 7/8" 068043 Open End Head TBIH 15/16 15/16" 068044 Open End Head TBIH 1" 1" 068159 Open End Head TBIH 3mm 3 mm 068202 Open End Head TBIH 4mm 4 mm 068139 Open End Head TBIH 5mm 5 mm 068046 Open End Head TBIH 5.5mm 5.5 mm 068140 Open End Head TBIH 6mm 6 mm 068160 Open End Head TBIH 6.5mm 6.5 mm 068141 Open End Head TBIH 7mm 7 mm 068142 Open End Head TBIH 8mm 8 mm 068149 Open End Head TBIH 8.5mm 8.5 mm 068143 Open End Head TBIH 9mm 9 mm 068144 Open End Head TBIH 10mm 10 mm 068145 Open End Head TBIH 11mm 11 mm 068146 Open End Head TBIH 12mm 12 mm 068147 Open End Head TBIH 13mm 13 mm 068148 Open End Head TBIH 14mm 14 mm 068136 Open End Head TBIH 15mm 15 mm 061430 Open End Head TBIH 16mm 16 mm 068237 Open End Head TBIH 17mm 17 mm 068222 Open End Head TBIH 18mm 18 mm 068208 Open End Head TBIH 19mm 19 mm 068199 Open End Head TBIH 20mm 20 mm 068138 Open End Head TBIH 21mm 21 mm 068209 Open End Head TBIH 22mm 22 mm Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-oeh-open-end-heads-for-tbih-torque-wrench-p-1965.html Mon, 12 Dec 2022 16:17:16 +0000 USD 1965 Mountz 966 TBIH-OEH https://www.abqindustrial.net/store/images/tbih-oeh-open-end-heads-tbih-wrench.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-hk-hex-key-heads-for-tbih-torque-wrench-p-1964.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1964 ]]>Hex Heads For Mountz TBIH Break-Over Designed to work with Mountz TBIH Break-Over Torque Wrench Features English and Metric Sizes Order Guide Part Number Model Wrench Head Size 068162 Hex Key Head TBIH 5/64 5/64" 068163 Hex Key Head TBIH 3/32 3/32" 068164 Hex Key Head TBIH 7/64 7/64" 068165 Hex Key Head TBIH 1/8 1/8" 068166 Hex Key Head TBIH 9/64 9/64" 068167 Hex Key Head TBIH 5/32 5/32" 068168 Hex Key Head TBIH 3/16 3/16" 068169 Hex Key Head TBIH 7/32 7/32" 068170 Hex Key Head TBIH 1/4 1/4" 068171 Hex Key Head TBIH 3/8 3/8" 068172 Hex Key Head TBIH 7/16 7/16" 068173 Hex Key Head TBIH 3/4 3/4" 068174 Hex Key Head TBIH 1/16 1/16" 068181 Hex Key Head TBIH 2mm 2 mm 068182 Hex Key Head TBIH 2.5mm 2.5 mm 068183 Hex Key Head TBIH 3mm 3 mm 068184 Hex Key Head TBIH 3.5mm 3.5 mm 068185 Hex Key Head TBIH 4 mm 4 mm 068186 Hex Key Head TBIH 5 mm 5 mm 068236 Hex Key Head TBIH 1.5 mm 1.5 mm 068175 Hex Key Head TBIH 0.050 0.050 Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-hk-hex-key-heads-for-tbih-torque-wrench-p-1964.html Mon, 12 Dec 2022 16:09:37 +0000 USD 1964 Mountz 982 TBIH-HK https://www.abqindustrial.net/store/images/tbih-hk-hex-key-heads-tbih-wrench.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-bh-box-end-heads-for-tbih-torque-wrench-p-1963.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1963 ]]>Box Heads For Mountz TBIH Break-Over Designed to work with Mountz TBIH Break-Over Torque Wrench Features 12pt head English and Metric Sizes Order Guide Part Number Model Wrench Head 068120 Box Head TBIH 1/8 1/8" 068121 Box Head TBIH 5/32 5/32" 068122 Box Head TBIH 3/16 3/16" 068123 Box Head TBIH 7/32 7/32" 068124 Box Head TBIH 1/4 1/4" 068125 Box Head TBIH 9/32 9/32" 068126 Box Head TBIH 5/16 5/16" 068127 Box Head TBIH 11/32 11/32" 068128 Box Head TBIH 3/8 3/8" 068129 Box Head TBIH 7/16 7/16" 068130 Box Head TBIH 1/2 1/2" 068131 Box Head TBIH 9/16 9/16" 068132 Box Head TBIH 5/8 5/8" 068133 Box Head TBIH 11/16 11/16" 068134 Box Head TBIH 3/4 3/4" 068137 Box Head TBIH 17mm 17 mm 068150 Box Head TBIH 6mm 6 mm 068151 Box Head TBIH 7mm 7 mm 068152 Box Head TBIH 8mm 8 mm 068153 Box Head TBIH 9mm 9 mm 068154 Box Head TBIH 10mm 10 mm 068155 Box Head TBIH 11mm 11 mm 068156 Box Head TBIH 12mm 12 mm 068157 Box Head TBIH 13mm 13 mm 068313 Box Head TBIH 5mm 5 mm Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-tbih-bh-box-end-heads-for-tbih-torque-wrench-p-1963.html Mon, 12 Dec 2022 16:08:59 +0000 USD 1963 Mountz 1000 TBIH-BH https://www.abqindustrial.net/store/images/tbih-bh-box-end-heads-tbih-wrench.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/checkline-dd-300-digital-precision-durometer-p-1962.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1962 ]]>Checkline DD-300 Digital Precision Durometer Highly accurate and repetitive Timer function to take measurement after (0-15) seconds Conform to DIN ISO 7619-1, ISO 868, ISO 7619-1 and ASTM D 2240 Our new DD-300 Durometer range takes rubber / plastic hardness testing to the next level. This DD-300 hardness tester has been designed to have almost no internal friction and therefore meets the highest quality standards. The entire internal movement is guided by bearings and makes this one of the best digital durometers available today. The DD-300 Durometer is available in Shore A, C, D, O, OO, AO, DO and Asker C. Kit Contents DD-300 Digital Precision Durometer Plastic foam fitted case AC power supply (100 - 240) Manual Calibration Certificate Battery Features Highly accurate and repetitive Measuring Modes: Continuous Mode Peak Mode Timer Mode Timer function to take measurement after (0-15) seconds Conform to DIN ISO 7619-1, ISO 868, ISO 7619-1 and ASTM D 2240 No internal friction due to precision engineered bearing system for internally moving parts Specifications Measuring range 0.5 - 100 units Resolution 0.1 Display LCD digit 8 mm high Data Output Port Opto RS232 Battery Re-chargeable 3.6V 1/2AA Size LI-SOCl2 Continuous Operating Time Battery Approx. 18 hours Auto Off After approx. 1 minute Power Supply Input - 100-240 VAC | Output: 5 VDC 650mA Dimensions 112 x 64 x 26 mm (HxWxD) Weight (net) 250 g Warranty 1 year Accuracy ± 0.5 Conformance to International Standards Model ASTM D2240 DIN 53505 ISO 868 ISO 7619 DD-300-A DD-300-B DD-300-C DD-300-D DD-300-DO DD-300-O DD-300-OO Indentor Types Type Indentor Shape Force A Flat cone point, 35º Included Angle Soft rubber, plastics, and elastomers, printer's rolls. 822 Gr B Sharp cone point, 30º Included Angle Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. 822 Gr C Flat cone point, 35º Included Angle Medium hard elastomers and plastics. Also useful to avoid surface marks. 4536 Gr D Sharp cone point, 30º Included Angle Hard rubber and plastics such as thermo plastics, flooring and bowling balls. 4536 Gr DO 3/32" Spherical Dense granular material, textile windings. 4536 Gr O 3/32" Spherical Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A. 822 Gr OO 3/32" Spherical Light foams, sponge rubber gels, animal tissue. 113 Gr Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/checkline-dd-300-digital-precision-durometer-p-1962.html Sun, 07 Jul 2024 14:56:53 +0000 USD 1962 Checkline 1000 DD-300 https://www.abqindustrial.net/store/images/dd-300-digital-precision-durometer.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-211-ia-intrinsically-safe-optical-speed-sensor-with-npn-pulse-output-p-1961.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1961 ]]>Compact MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor with NPN Pulse Output Intrinsically Safe Laser Optical Speed Sensor for RPM measurement Operating frequency up to 99999 rpm The Compact MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor has is Ex-II 1G Ex ia op is IIC T4 Ga (-20°C < Ta < +40°C) certified. The certification level allows for use in a wide range of hazardous environments in petrochemical, Gas and volatile materials processing industries, ideally suited for Condition Monitoring, Data collectors in balancing applications, these sensors give excellent performance with repeatable results, engineered for easy mounting with the optional Mounting Bracket and Mini Tripod Stand in handheld applications. Features Operating frequency up to 99999 rpm Long optical range up to 2 meters Wide angle of operation – up to 80° degree On Target indicator standard Protection rating IP67 Integral Connector Stainless Steel housing Internally fused to prevent overload Specifications Measuring Range 99999 rpm Sensing Range 100mm – 2000mm Angle ± 80° degree Light source Red Laser Class II 635nm Wavelength 635nm Power Input 5v @ 30ma typical Output NPN Pulse Connection M12 4-pin Dimensions 20mm x L 92mm Operating Temperature -20° / +40°C Downloads MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor with NPN Pulse Output - Instruction Manual MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor with NPN Pulse Output - Ex Certification Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-211-ia-intrinsically-safe-optical-speed-sensor-with-npn-pulse-output-p-1961.html Thu, 15 Jun 2023 19:08:05 +0000 USD 1961 Compact 1000 MiniVLS-211ia https://www.abqindustrial.net/store/images/minivls-211-ia-intrinsically-safe-optical-speed-sensor.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/hans-schmidt-hp-pt-test-block-for-curved-bottom-hp-durometers-p-1960.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1960 ]]>Hans-Schmidt HP-PT Test Block for curved bottom HP Durometers Test Block for Curved Bottom HP Textile Durometers *Durometer not included The HP-PT allows users to test the function of their HP textile durometer and ensure it is operating properly. DESIGNED FOR DUROMETERS WITH CURVED BOTTOM SURFACE ONLY, NOT "F" FLAT MODELS. *Durometer not included Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/hans-schmidt-hp-pt-test-block-for-curved-bottom-hp-durometers-p-1960.html Thu, 29 Jul 2021 02:16:57 +0000 USD 1960 Hans-Schmidt 1000 HP-PT https://www.abqindustrial.net/store/images/hp-pt-test-block-curved-bottom-hp-durometers.jpg Test Block for Curved Bottom HP Textile Durometers

---

*Durometer not included

---

]]> https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-cases-for-inspection-instruments-p-1959.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1959 ]]>DeFelsko CASENYLON-G Nylon Pouch DeFelsko CASEINS Pelican Inspection DeFelsko CASEINSP Plastic Inspection DeFelsko CASEATAB-P Pelican Case for Adhesion Testers Automatic Large Pelican Case - Order Code: CASEINSPL-P Heavy-duty, waterproof Large Pelican* cases come complete with a custom foam insert to securely hold your PosiTector instruments and 5+ PosiTector probes - including theDeFelsko PosiTector SST Soluble Salt Tester accessories. Custom foam insert securely stores the PosiTector gage body and multiple probes and accessories PosiTector SST Accessory foam insert can be removed to store even more accessories Lightweight, watertight & crushproof Automatic Pressure Equalization Valve - balances interior pressure, keeps water out Durable soft-grip handle Press & pull latches and pad-lockable hasps Meets current FAA requirements for carry-on bags Guaranteed for life *Case only - contents not included Dimensions: Interior: 17.00" x 11.70" x 6.20" (43.2 x 29.7 x 15.7 cm) Exterior: 18.20" x 13.40" x 6.70" (46.2 x 34 x 17 cm) For use with the: DeFelsko PosiTector SST Pelican Inspection Case - Order Code: CASEINSP-P Heavy-duty, waterproof Pelican* cases come complete with a custom foam insert to securely hold your PosiTector instruments and 3+ PosiTector probes. Custom foam insert securely stores the PosiTector gage body and multiple probes and accessories Lightweight, watertight & crushproof Automatic Pressure Equalization Valve - balances interior pressure, keeps water out Comfortable rubber over-molded handle Two easy open Double Throw latches and pad-lockable hasps Meets current FAA requirements for carry-on bags Guaranteed for life *Case only - contents not included Dimensions: Interior: 11.81" x 8.87" x 5.18" (30 x 22.5 x 13.2 cm) Exterior: 13.37" x 11.62" x 6.00" (34 x 29.5 x 15.2 cm) For use with the: DeFelsko Inspection Kits Pelican Case for PosiTest AT-A - Order Code: CASEATAB-P Heavy-duty, waterproof Pelican case complete with a custom foam insert to securely hold your PosiTest AT-A instrument. Pelican cases can be purchased as an upgrade from the standard case at the time of purchase, or as an accessory. Waterproof Two easy open Press & Pull latches Comfortable double-layered, soft-grip handle Strong, lightweight Two padlockable hasps Meets airline regulations for carry-on luggage* *Check with your airline for exact measurement requirements *Case only - contents not included Exterior: 18.20" x 13.40" x 6.70" (46.2 x 34 x 17 cm) For use with the: DeFelsko PosiTest AT PosiTector Case - Order Code: CASEINSP Convenient hard shell case for carrying a PosiTector gage body and multiple probes - including any of the DeFelsko PosiTector 6000 Coating Thickness probes, DeFelsko DPM Dew Point Meter probes, DeFelsko SPG Surface Profile probes, or DeFelsko UTG Ultrasonic Wall Thickness probes. Case has compartments for Certificates of Calibration, instruction manuals and other accessories. For use with the: DeFelsko PosiTector 6000, DeFelsko PosiTector 200, DeFelsko PosiTector SPG, DeFelsko PosiTector RTR H, DeFelsko PosiTector RTR 3D, DeFelsko PosiTector DPM, DeFelsko PosiTector IRT, DeFelsko PosiTector SST, DeFelsko PosiTector UTG, DeFelsko PosiTector SHD Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-cases-for-inspection-instruments-p-1959.html Wed, 10 Aug 2022 18:36:48 +0000 USD 1959 DeFelsko 980 DeFelsko-Case https://www.abqindustrial.net/store/images/defelsko-cases-inspection-instruments.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-6000prbext-telescopic-probe-extender-p-1958.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1958 ]]>For use with the: DeFelsko PosiTector 6000 FS, NS, FNS, FXS, FNDS, NAS and FTS probes Provides up to 124 cm (49") of reach and collapses to 47 cm (18.5") for easy storage Articulating probe holder with rubber stabilizing ring provides secure probe contact at odd angles The DeFelsko 6000PRBEXT Telescopic Probe Extender is lightweight, portable device increases the reach of DeFelsko PosiTector 6000 regular cabled probes up to 124 cm (49"), ergonomically measuring overhead or underfoot. Kit Contents DeFelsko 6000PRBEXT Telescopic Probe Extender for built-in mount for securing the PosiTector gage body allowing for comfortable one-handed operation Features For use with the: DeFelsko PosiTector 6000 FS, NS, FNS, FXS, FNDS, NAS and FTS probes Provides up to 124 cm (49") of reach and collapses to 47 cm (18.5") for easy storage Articulating probe holder with rubber stabilizing ring provides secure probe contact at odd angles Gage body mount securely holds the PosiTector in place Detachable probe holder is ready to integrate into longer extensions (monopods) and drone/robotic testing systems Specifications Length 47 cm (18.5") collapsed, up to 124 cm (49") extended Headroom 10 cm (3.3") Weight 370 g (13 oz.) Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-6000prbext-telescopic-probe-extender-p-1958.html Wed, 10 Aug 2022 18:36:50 +0000 USD 1958 DeFelsko 989 6000PRBEXT https://www.abqindustrial.net/store/images/defelsko-6000prbext-telescopic-probe-extender.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-1000-precision-material-thickness-gauge-p-1957.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1957 ]]>High Accuracy & Repeatability due to a rigid frame The standard resolution is 0.01 mm, with resolution of 0.001 mm available (Option R) 3 Ranges Standard 0-10mm (0-0.394") Option E25 0-25mm (0-1.000") Option E50 25-50mm (1-2.000") Resolution 0.01 or 0.001 mm The D-1000 Precision Material Thickness Gauge accurately measures a wide variety of materials including fabrics, various textiles, non-wovens, felt, fleece, geomaterials, floor coverings, leather, foils, rubber etc. Several different models are offered which supplied with specific contact footers providing a pre-determined test pressure as rewuired by various ASTM and DIN EN ISO norms and standards including: DIN EN ISO 5084 DIN EN ISO 9073-2 DIN EN ISO 9863-1 DIN EN ISO 54540 DIN EN ISO 2589 DIN 53370 DIN 53370 We can alos supply custom models to cover various standards. We require that you specify the footer diameter (or shape) and required test pressure (or Load). Kit Contents D-1000 Precision Material Thickness Gauge USB cable Calibration report of manufacturer Transport packing case Instruction Manual Features High Accuracy & Repeatability due to a rigid frame The standard resolution is 0.01 mm, with resolution of 0.001 mm available (Option R) The standard measuring range is 0 – 10 mm; 0 – 25 mm and 25 – 50 mm are optional available 95mm Throat Depth (center of measuring platform) Measurement Feeler is controlled by the Hand-Wheel on the side of the frame Optional USB interface Battery-operated. AC-Adapter optionally available Includes Manufacturer Calibration Certification Traceable Calibration Certification (DakkS) - OPTIONAL Customs models available with desired Footer Diameter/Shape and Desired Test Pressure Specifications Accuracy ±0.02 mm (0.001")±0.002 mm (0.0001") - Option Code R Measuring range (standard) 0 – 10 mm (0-0.400") Measuring Range (Option E25) 0 - 25 mm (0 - 1.000") Measuring Range (Option E50) 25 - 50 mm (1 - 2.000") Resolution (standard) 0.01 mm (0.001") Resolution (optional) 0.001 mm (0.00001"), Option Code R Throat Depth 95 mm / 3.75" (to center of platform) Display 6 digit LCD, 8.5 mm high Measuring Unit mm or inch (user-selected) Feeler Shape As per ISO, DIN or ASTM Sandard Feeler Diameter As per ISO, DIN or ASTM Sandard Output signal USB Battery 1 lithium battery 3 V, type CR2032, capacity of 220 mAh Battery Life Approx. 1 year Low Battery Indicator When "B" is shown on the display Temperature range 10 – 45 °C Dimensions 250 x 180 x 400 mm (L x W x H) Weight (net/gross) 12 kg (15 kg Available Models Model Standard Application Feeler Ø mm Feeler cm² Test Pressure D-1000-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa D-1000-V DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.5 kPa D-1000-G DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa D-1000-HY DIN EN ISO 54540 Hygienic paper 56.42 25 2 kPa D-1000-L DIN EN ISO 2589 Leather 10 0.785 49.1 kPa D-1000-Gi Rubber 35.68 10 5 kPa D-1000-F1 DIN 53370 Foil R 30 mm 0.5 N D-1000-F2 DIN 53370 Foil 7.5 0.442 0.9 N Downloads D-1000 Precision Material Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-1000-precision-material-thickness-gauge-p-1957.html Sat, 06 Jul 2024 15:38:18 +0000 USD 1957 Checkline 1000 D-1000 https://www.abqindustrial.net/store/images/d-1000-precision-material-thickness-gauge.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/dillon-cranegard-clamp-on-load-cell-cable-overload-protection-p-1956.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1956 ]]>Dillon CraneGard Clamp-on Load Cell Cable Overload Protection Clamps on cables for wire rope hoist, elevator and crane overload prevention and slackline detection. Installs in minutes with screwdriver and Allen wrench. The Dillon CraneGard Clamp-on Load Cell Cable Overload Protection for wire rope hoist, elevator and crane overload prevention and slackline detection. Installs in minutes with screwdriver and Allen wrench. Installation is simplicity itself. Clamp the Cranegard® directly onto a slack hoist or crane wire rope quickly without severing rope or interrupting service. Up to four switches can be furnished. Switch actuates immediately when pre-set load limit is exceeded. Dillon will set the switches to trigger at the loads you desire, if specified at time of order. Features Basic units can accommodate 1,2,3 or 4 of option B or 1 or 2 of option C switches Ultimate safety factor of all units is 2:1 (1.8:1 for metric capacities) Cable should be IWRC (Independent Wire Rope Core) with as many strands as possible. Wire rope selection for any application for proper safety factor is a customer responsibility. Calibration performed with rope diameter specified at order. Specifications Model Capacity lb (kg) Min. Set Point lb (kg) Repeatability lb (kg) Rope Diameter* inches (mm) CGS-1 2,500 (1250) 100 (50) ±75 (±35) 3/16 to 1/2 (5 to 13) CGS-2 5,000 (2500) 200 (100) ±150 (±75) 3/8 to 7/8 (10 to 22) CGS-3 10,000 (5000) 400 (200) ±300 (±150) 7/16 to 7/8 (11 to 22) CGS-4 20,000 (10000) 800 (400) ±600 (±300) 5/8 to 11/4 (16 to 32) Model Switch Option Width in (cm) Height in (cm) Length in (cm) CGS-1 1B, 2B 3B 4B 3.6 (9.2) 4.6 (11.8) 5.4 (13.7) 11.5 (29.2) CGS-2 1C 5.0 (12.7) 6.0 (15.2) 11.5 (29.2) CGS-3 2C 7.3 (18.4) 6.0 (15.2) 11.5 (29.2) CGS-4 1B, 2B 3B, 3B 1C 2C 4.5 (11.4) 5.4 (13.7) 5.9 (14.9) 8.0 (20.3) 7.8 (19.7) 16.0 (40.6) * Specify rope diameter when ordering. Other rope diameters can be specified on special order. Applications Force control switch Force control switches are used to protect cranes, hoists and other lifting machinery against weight or force overload as well as slack load. They are also used to perform control functions in the case of DynaSwitch. There are no dial indicators associated with these devices, only switches which not only shut off power when an overload condition exists, but also operate lights, buzzers or klaxons to warn of an impeding overload. Cranegard The Cranegard clamps on to the line allowing it to be mounted where it is not possible to mount a DynaSwitch. No rope cutting is required. Ordering Information When ordering Cranegards: Specify Model number. Specify pulley size (determined by rope diameter). Specify switch option and quantity. Specify switch set point(s) if factory setting is desired. Example: For a 5,000 lb capacity unit with pulleys grooved for 5/8" rope diameter, with three weatherproof option B switches, set at 2,000, 3,000, and 4,000 lb. Use this shortened form to designate models and options: “CGS-2-B3 For 5/8" rope diameter Switch settings at 2,000 lb (ascending), 3,000 lb (ascending) and 4,000 lb (ascending).” Downloads Dillon CraneGard Clamp-on Load Cell Cable Overload Protection - Data Sheet Dillon CraneGard Clamp-on Load Cell Cable Overload Protection - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/dillon-cranegard-clamp-on-load-cell-cable-overload-protection-p-1956.html Sat, 06 Jul 2024 15:36:34 +0000 USD 1956 Dillon 1000 CraneGard https://www.abqindustrial.net/store/images/dillon-cranegard-clamp-on-load-cell-cable-overload-protection.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-mwp-compact-small-crane-scale-mini-weigher-plus-p-1955.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1955 ]]>StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus Selectable Units te, lbs, kN & kg High Resolution Compact Size The StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus is small and compact mini crane weigher scale will suit most lifting applications. Available in capacities from 100kg to 5t. Worldwide, it’s Straightpoint’s most popular product and has been manufactured since 1987. The Miniweigher plus crane scale offers robust construction, high accuracy, compact size and extreme portability. Utilised by utility companies on every continent, the Miniweigher plus crane scale is quite often mounted between a winch and a tripod, allowing the load monitoring and safe lowering and raising of equipment and personnel, and has proven itself to be an indispensable tool for underground sewer, water, gas, and utility vault access. The StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus features full function push button controls for tare, choice of units (lbs, kg, kN and tonnes), peak hold, preset tare, audible set-point alarm and an overload counter. Straightpoint’s advanced microprocessor based electronics provide the Miniweigher plus with high speed read rates, extreme resistance to industrial level noise and unprecedented stability. This high stability allows 5,000 + divisions and the highest standard resolution of any compact digital crane scale on the market today. The unit also features a RS-485 serial output providing added functionality and versatility. In all, the lightweight design, corrosion resistant finish, advanced electronics and full feature display have made the Miniweigher plus crane scale the only choice when looking for a compact, safe and accurate, crane scale. Kit Contents StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus High quality Crosby hook and lifting eye Proof test certificate Operator Manual Carry / Storage Case Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Complies with ASME B30.26 Features Selectable Units te, lbs, kN & kg High Resolution Compact Size Tare Preset Tare 90dB Audible Set Point Alarm RS-485 Serial Output Corrosion Resistant Finish Benefits High Accuracy Lightweight Large 25mm/1” LCD Display Applications Under Hook Crane Weighing Under Tripod Load Monitoring Light Duty Structural Load Testing Pipe and Fastener High Torque Load Application Wire Rope and Cable Tension Monitoring Shipping and Receiving Weighing Escalator Comb Impact Load Testing Specifications Protection IP65 Battery Type 9v PP3 Battery Life 80hrs continuous Display Type  6 digit 25mm LCD | 6 digit 1" LCD Operating Temp  -10 to + 50 ° C | 14 to 122 ° F Accuracy ±0.1% full scale Units  t, kg, kN & lbs | lbs, t, kg, & kN Ranges Part Number Capacity Resolution  Weight  Safety Factor MWP100KG 100 kg220 lb 0.05 kg0.1lb 1.5 kg3.3 lb 10 : 01 MWP250KG 250 kg550 lb 0.1 kg0.2lb 1.5 kg3.3 lb 05 : 01 MWP500KG 500 kg1100 lb 0.2 kg0.5lb 1.5 kg3.3 lb 05 : 01 MWP1T 1000 kg2200 lb 0.5 kg1 lb 1.5 kg3.3 lb 05 : 01 MWP2T 2 te4400 lb 0.001 te2 lb 3.1 kg6.8 lb 05 : 01 MWP5T 5 te11000 lb 0.001 te2 lb 8.7 kg19.2 lb 05 : 01 Dimensions Part Number A B C D E F G MWP100KG 823.23 1134.45 813.19 501.97 2409.45 2088.19 220.87 MWP250KG 823.23 1134.45 813.19 501.97 2409.45 2088.19 220.87 MWP500KG 823.23 1134.45 813.19 501.97 2409.45 2088.19 220.87 MWP1T 823.23 1134.45 813.19 501.97 2409.45 2088.19 220.87 MWP2T 1174.61 1124.41 923.62 642.52 32012.60 27110.67 281.10 MWP5T 1365.35 1124.41 923.62 983.86 44417.48 36514.37 421.65 Downloads StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus - Data Sheet StraightPoint MWP Compact Small Crane Scale Mini Weigher Plus - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-mwp-compact-small-crane-scale-mini-weigher-plus-p-1955.html Wed, 03 Jan 2024 23:43:43 +0000 USD 1955 Straightpoint 999 MWP https://www.abqindustrial.net/store/images/straightpoint-mwp-compact-small-crane-scale-mini-weigher-plus.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-lbp-compression-load-cell-loadblock-plus-p-1954.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1954 ]]>StraightPoint LBP Compression Load Cell Loadblock Plus Large LCD Display Pre-lift weight and centre of gravity calculations for large plant and equipment Hydraulic ram testing The StraightPoint LBP Compression Load Cell Loadblock Plus is a low capacity, self-indicating compression loadcell, used in many testing and load monitoring applications worldwide. The integral display eliminates the need for a separate display or cable assemble that can be easily damaged. Applications include the measurement of loads associated with the testing of hydraulic presses, cylinders or jacks. This latest version of our Loadblock has advanced features and benefits providing solutions for today’s complicated load test and force monitoring needs. Features include full function push button controls for tare, units of measure (lbs, kg, kN, and tonnes), peak hold, pre-set tare, audible set-point alarm and an overload counter. This crucial overload alarm counter is a requirement for many safety and quality control departments as it keeps track of overload events allowing the load cell in question to be removed from service immediately following a calibration voiding overload event. The load cell in question can then be sent out for proper testing and if necessary, recalibration before re-entering service. The advanced microprocessor based electronics provide the Loadblock Plus with high speed read rates (500 / sec), extreme resistance to industrial level noise and unprecedented stability. This high stability provides the Loadblock Plus with 5000 + divisions and the highest standard resolution of any self-indicating compression load cell on the market today. The unit also features a RS-485 serial output port allowing for remote viewing with either the handheld Plus Digital Display / Controller or Windows PC Desktop controller data logging software. Kit Contents StraightPoint LBP Compression Load Cell Loadblock Plus Proof test certificate Operator Manual Carry / Storage Case Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Features Large LCD Display High Resolution Peak Hold Compact Size Tare Preset Tare Offset Adjustment Applications Pre-lift weight and centre of gravity calculations for large plant and equipment Hydraulic ram testing Specifications Protection IP65 / NEMA4x Battery Type 9v PP3 Battery Life 80 hrs continuous Display Type  6 digit 25 mm LCD | 6 digit 1" LCD Operating Temp  -10 to +50 °C | 14 to 122 ˚F Accuracy ± 0.1% full scale Ranges Part Number Capacity Resolution Weight Safety Factor LBP250KG 2789035 250 kg 550 lb 0.1kg 0.2lb 900 g 2 lb 04 : 01 LBP500KG 2789037 500 kg 1100 lb 0.2kg 0.5lb 900 g 2 lb 05 : 01 LBP1T 2789034 1 te 2200 lb 0.0005 te 1lb 900 g 2 lb 05 : 01 LBP2T 2789036 2 te 4400 lb 0.001 te 2 lb 1.5 kg 3.3 lb 05 : 01 LBP5T 2789038 5 te 11000 lb 0.001 te 2 lb 3.1 kg 6.8 lb 05 : 01 Dimensions Part Number A B C D E LBP250KG 2789035 81 3.19 81 3.19 113 4.45 90 3.54 104 4.09 LBP500KG 2789037 81 3.19 81 3.19 113 4.45 90 3.54 104 4.09 LBP1T 2789034 81 3.19 81 3.19 113 4.45 90 3.54 104 4.09 LBP2T 2789036 92 3.62 117 4.61 112 4.41 104 4.09 Not Available LBP5T 2789038 92 3.62 136 5.35 112 4.41 115 4.53 Not Available Downloads StraightPoint LBP Compression Load Cell Loadblock Plus - Data Sheet StraightPoint LBP Compression Load Cell Loadblock Plus - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-lbp-compression-load-cell-loadblock-plus-p-1954.html Wed, 01 Dec 2021 19:34:58 +0000 USD 1954 Straightpoint 1000 LBP https://www.abqindustrial.net/store/images/straightpoint-compression-load-cell-loadblock-plus.jpg Large LCD Display

---

Pre-lift weight and centre of gravity calculations for large plant and equipment

---

Hydraulic ram testing

---

]]> https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-s-beam-load-cell-shear-beam-tension-and-compression-p-1953.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1953 ]]>StraightPoint S-Beam Load Cell Shear Beam Tension and Compression Fully sealed up to IP65 / NEMA4X High Accuracy Built in Overload Protection The StraightPoint S-Beam Load Cell Shear Beam Tension and Compression is a range of stainless steel "S" beam load cells from 100kg to 5t. The Straightpoint "S" Beam range of tension / compression load cells are suitable for smaller Silo, vessel and tank weighing applications or for building into OEM projects, testing machines etc. Hardwired, they are supplied with a 10m / 30ft cable and can be connected to the Straightpoint range of accessories such as the Handheld plus. Fitting options available including threaded bar, rod end bearing and eyebolts. The 'S' beam loadcell can be used in both tension or compression and has a threaded hole at each end making it a very flexible solution. Kit Contents StraightPoint S-Beam Load Cell Shear Beam Tension and Compression Proof test certificate Operator Manual Carry / Storage Case Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Features Fully sealed up to IP65 / NEMA4X High Endurance High Capacity / Low Capacity In both Tension and Compression High Accuracy Built in Overload Protection Compact designs available for tight environment Single Point Construction Application Force Measurement in tension & compression Engine dynomometers OEN Projects Specifications Protection IP67 Safety Factor 5:1 Operating Temp  -30 to + 80 °C | -22 to 176 ˚F Accuracy ± 0.1% full scale Ranges Part Number Capacity  Resolution  Weight  SB500K 500 kg1100 lb 0.2 kg0.5 lb 0.9 kg2 lb SB1T 1 te2200 lb 0.0005 te1 lb 0.9 kg2 lb SB2T 2 te4400 lb 0.001 te2 lb 0.9 kg2 lb SB5T 5 te11000 lb 0.001 te2 lb 1.9 kg4.2 lb Dimension Part Number SB500K SB1T SB2T SB5T A 70 2.76 70 2.76 70 2.76 100 3.94 B 90 3.54 90 3.54 90 3.54 120 4.72 C 19 0.75 19 0.75 19 0.75 26 1.02 D 19 0.75 19 0.75 19 0.75 26 1.02 E M12 x 1.75 M12 x 1.75 M16x2 M16x2 M16x2 M16x2 M24x2 M24x2 F 32 1.26 32 1.26 32 1.26 45 1.77 Downloads StraightPoint S-Beam Load Cell Shear Beam Tension and Compression - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-s-beam-load-cell-shear-beam-tension-and-compression-p-1953.html Tue, 26 Oct 2021 12:46:46 +0000 USD 1953 Straightpoint 1000 S-Beam https://www.abqindustrial.net/store/images/straightpoint-s-beam-load-cell-shear-beam-tension-compression.jpg Fully sealed up to IP65 / NEMA4X

---

High Accuracy

---

Built in Overload Protection

---

]]> https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-lp-load-sensor-cabled-or-wireless-standard-loadpin-p-1952.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1952 ]]>Long range 2.4GHz version providing industry leading wireless range of 1000m or 3280ft to SP's SW-HHP handheld or software options Bluetooth output and can be connected to any smart phone running our free HHP app on iOS or Android at ranges up to 100m or 328ft Cabled version with mV/V or analogue or digital output. Subsea option also available The StraightPoint LMP Load Sensor Cabled or Wireless Standard Loadpin is range of Loadpins (LMP’s) or shear pins are designed for use in applications where an end of line load cell cannot be used or when an integrated solution is required in applications such as pulley or sheave axles, moorings, supports, winches or support blocks. Three versions standard loadpin are available: Long range 2.4GHz version providing industry leading wireless range of 1000m or 3280ft to SP's SW-HHP handheld or software options. Bluetooth output and can be connected to any smart phone running our free HHP app on iOS or Android at ranges up to 100m or 328ft. Cabled version with mV/V or analogue or digital output. Subsea option also available. Often a customised design they are manufactured in-house from 17-4PH stainless steel and are normally supplied complete with an anti-rotation plate as a cabled or wireless solution. Built to withstand the harshest environments in industries such as marine, offshore oil and gas or construction they are suitable for use in exposed situations and can be supplied as a subsea product with SubConn connectors to withstand immersion in seawater to extreme depths. Straightpoint cabled Loadpins are typically connected to Straightpoint’s range of handheld displays or may be supplied with a vast array of output formats to include mV/V, RS-422, RS-485, utilising the ASCII, MODBUS TRU and CAN-BUS protocols or an analogue output such as 4-20mA for PLC integration. General Description Standard Loadpin:A loadpin senses the force applied across it, via strain gauges installed within a small bore through the centre of the pin. Two grooves are machined into the outer circumference of the pin to define the shear planes, which are located between the forces being measured. Load Pin Environmental Protection:As the instrumented area of the load pin is totally contained within a small central bore, the load pin sensor is inherently waterproof. Manufactured from special stainless steels, fitted with welded or `O' ring sealed end caps and with special attention to the signal cable glanding, a very high operating reliability can be guaranteed even for load pins operating underwater. Typical Locations If a pin exists within a defined load path or can be fitted to experience a force, then a Straightpoint Load Pin can be installed to monitor that load. The sketches below show typical locations for load pins. Specifications Units kgs,tonnes Protection IP67 (IP68 available as option) Safety Factor 300% of SWL Operating Temperature  -20 to +70 °C | -4 to 158˚F Accuracy ±1% full scale Ranges Part Number Capacity  Resolution  Weight  LP500KG 500kg 1100 lbs 0.2 kg 0.5 lb 0.9 kg 0.4 lb LP1T 1000kg 2200 lbs 0.5 kg 1 lb 1 kg 0.5 lb LP2.5T 2.5te 5500 lbs 0.001 te 2 lb 1.2 kg 0.9 lb LP3.5T 3.5te 7700 lbs 0.001 te 2 lb 1.4 kg 1.3 lb LP6.5T 6.5te 14,000 lbs 0.002 te 5 lb 2 kg 2.6 lb LP15T 15te 33,000 lbs 0.002 te 5 lb 3.1 kg 5 lb LP25T 25 te 55,000 lbs 0.005 te 10lb 5.6 kg 10.3 lb LP50T 50 te 110,000 lbs 0.01 te 20lb 8.6 kg 18 lb LP100T 100 te 220,000 lbs 0.05 te 100lb 11.8 kg 24 lb LP250T 250 te 550,000 lbs 0.1 te 200lb 29.8 kg 64 lb LP500T 500 te 110,0000 lbs 0.2 te 500lb 79.2 kg 172 lb LP750T 750 te 165,0000 lbs 0.2 te 500lb 146 kg 319 lb LP1000T 1000 te 220,0000 lbs 0.5 te 1000lb 275 kg 603 lb LP1500T 1500 te 330,0000 lbs 0.5 te 1000lb 389 kg 854 lb Dimensions Part Number Dim A  Dim B Dim C Dim ØD LP500KG 24 0.94 36 1.42 70 2.76 20 0.79 LP1T 35 1.38 49 1.93 80 3.15 20 0.79 LP2.5T 45 1.77 70 2.76 100 3.94 25 0.98 LP3.5T 50 1.97 75 2.95 105 4.13 30 1.18 LP6.5T 63 2.48 95 3.74 125 4.92 40 1.57 LP15T 75 2.95 114 4.49 150 5.91 50 1.97 LP25T 89 3.50 152 5.98 195 7.68 63 2.48 LP50T 102 4.02 178 7.01 225 8.86 75 2.95 LP100T 110 4.33 190 7.48 230 9.06 88 3.46 LP250T 130 5.12 220 8.66 300 11.81 125 4.92 LP500T 225 8.86 370 14.57 440 17.32 170 6.69 LP750T 295 11.61 500 19.69 590 23.23 200 7.87 LP1000T 360 14.17 612 24.09 712 28.03 250 9.84 LP1500T 430 16.93 731 28.78 832 32.76 275 10.83 Downloads StraightPoint LP Load Sensor Cabled or Wireless Standard Loadpin - Data Sheet StraightPoint LP Load Sensor Cabled or Wireless Standard Loadpin - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-lp-load-sensor-cabled-or-wireless-standard-loadpin-p-1952.html Sat, 06 Jul 2024 15:35:40 +0000 USD 1952 Straightpoint 1000 LMP https://www.abqindustrial.net/store/images/straightpoint-load-sensor-cabled-wireless-standard-loadpin.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-insight-software-p-1951.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1951 ]]>StraightPoint INSIGHT Software Logging at timed intervals, manual or on overload/underload Visual and audible alarms indicate overload, underload, low battery and communications error Zoom in to individual load cell to see data trends and history The StraightPoint INSIGHT Software is supplied with an SW-D USB wireless dongle, allows connection of up to 126 Straightpoint wireless load cells simultaneously onto any Windows tablet or laptop. Multi-channel display and data logging mode – view and log load data from connected load cells plus totals loads live on screen and directly into a .csv file for later analysis at speeds of up to 200Hz. Visualisation mode – For complicated lifts import a photo of the lift and drag and drop load cell displays – make the screen look like the lift. Centre of gravity mode – Connect to SP’s range of wireless compression load cells and use this feature to weigh and calculate the centre of gravity of large items and structures. Proof Load Testing - Real time graphing of load test and auto generated test certificates. Features Logging at timed intervals, manual or on overload/underload Visual and audible alarms indicate overload, underload, low battery and communications error Zoom in to individual load cell to see data trends and history 100% wireless, no easily damaged cables 700m or 2300ft range Benefits Displays and logs data up to 126 Straightpoint wireless load cells simultaneously Three weighing’s per C of G report with averages and statistical analysis to ISO19901 Plot load cell positioning using measurements or GPS co-ordinates Extra fields for operator, client, wind speed and temperature available for reporting Appications Tandem Lifting and Lowering Water weight Testing Overhead Weighing Bollard Pulling Tug Testing Stevedoring Entertainment rigging Dynamic load monitoring Weighing large industrial items - absorbers, jackets, transformers, generators and modules Specifications USB Dongle Operating Tem -20°C to +70° / -4°F to 158°F License License Free Frequency 2.4 GHz Range 700 meters / 2300 ft Load Cell Inputs Up 126 Operating System Windows 7, 8 or 10 Max Data Throughput 4000 samples/sec | 20 Loadcells at 200Hz each or max of 126 Loadcells at low sample rate Downloads StraightPoint INSIGHT Software - Data Sheet StraightPoint INSIGHT Software - Instruction Manual StraightPoint INSIGHT Software - Guide Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-insight-software-p-1951.html Wed, 01 Dec 2021 19:42:54 +0000 USD 1951 Straightpoint 1000 INSIGHT https://www.abqindustrial.net/store/images/straightpoint-insight-software.jpg Logging at timed intervals, manual or on overload/underload

---

Visual and audible alarms indicate overload, underload, low battery and communications error

---

Zoom in to individual load cell to see data trends and history

---

]]> https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdkitb-positest-hhd-basic-kit-high-voltage-holiday-detector-p-1950.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1950 ]]>DeFelsko HHDKITB PosiTest HHD Basic Kit High Voltage Holiday Detector Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected The DeFelsko HHDKITB PosiTest HHD Basic Kit High Voltage Holiday Detector is used to Detect holidays, pinholes and other discontinuities using pulse DC Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue Regulated pulse DC voltage output that won't change under load -±5% voltage accuracy Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Extensive electrode options - choose from a wide range of rolling spring and flat wire brush electrodes or use electrodes from other manufacturers with optional adaptors - custom sizes available upon request Long Form Certificate of Calibration included with each instrument Conforms to ASTM D4787/D5162/G62, ISO 29601, NACE SP0188/SP0274/SP0490, AS3894.1 Kit Contents DeFelsko PosiTest HHD High voltage Holiday Detector Stick-Type 7.6 m (25') ground (earth) cable with ground clip 36 Wh Li-ion battery pack with built-in charge state indicator Smart charger with universal AC voltage input Stainless steel fan brush 13 cm (5" ) electrode rod with thumb screw Instruction Manual Hard shell case Long Form Certificate of Calibration traceable to NIST Two year warranty Features Simple Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected Lightweight, ergonomic design provides comfortable all-day use, reducing fatigue Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Durable Rugged, environmentally sealed ABS plastic enclosure Weatherproof, dustproof, and shockproof Included hard shell case with custom foam inserts for superior protection Two year warranty Accurate Built-in certified voltmeter (crest meter, jeep meter) displays and regulates the voltage at the electrode Long Form Certificate of Calibration included with each instrument Conforms to national and international standards including ISO, ASTM, and NACE Powerful Strobe light and loud audible alarms emitted when a holiday is detected. Audio alarm mode can be adjusted for differing environments. Removable Smart lithium-ion battery with built-in charge state indicator Versatile A wide range of rolling spring electrodes and wire brushes are available. Custom sizes available upon request. Optional handheld wand accessory coverts the detector into a wand configuration ideal for testing hard-to-reach areas (suitable for voltages < 15 kV) Industry-standard connectors and adaptors for compatibility with nearly all existing electrodes User adjustable voltage range from 0.5 – 35 kV Safe Press and hold Safety Trigger helps prevent accidental high voltage generation 7.6 m (25') ground (earth) cable with locking connector and spring clamp Shock proof/creep proof - internally sealed to minimize creep distance to high voltage components. Designed in accordance with IEC 61010-1. Specifications Output Voltage Range 0.5-35 kV Output Voltage Adjustment 0.5 kV-1 kV: 10 Volt Steps1 kV-35 kV: 100 Volt Steps Output Accuracy ±5% Pulse Duration 10 μs Pulse Repetition Rate 30 Hz Coating Thickness Range up to 20 mm (780 mils)* Operating Temperature -20° to 60°C (-4° to 140°F) Case Heavy duty hard-shell case Included Electrode Rod 13 cm (5") Shoulder Strap Optional Battery Size 36 Wh Li-ion Typical Battery Life for selected rolling springs @ 10 kV - Ø 12" 16 hrs. Typical Battery Life for selected rolling springs @ 10 kV - Ø 40" 12 hrs. Weight 6 kg (13 lbs.) Dimensional Weight 14 kg (30 lbs.) Electrodes Rolling Spring Electrodes Rolling Spring Coil for 4” pipe (102 mm) OD HHDSPRING4 Rolling Spring Coil for 6” pipe (152 mm) OD HHDSPRING6 Rolling Spring Coil for 8” pipe (203 mm) OD HHDSPRING8 Rolling Spring Coil for 12” pipe (304 mm) OD HHDSPRING12 Rolling Spring Coil for 14” pipe (356 mm) OD HHDSPRING14 Rolling Spring Coil for 16” pipe (406 mm) OD HHDSPRING16 Rolling Spring Coil for 20” pipe (508 mm) OD HHDSPRING20 Rolling Spring Coil for 24” pipe (610 mm) OD HHDSPRING24 Please Note: Each spring includes two pre-installed spring couplers. A spring connector (HHDCONNECT) is required to attach the PosiTest HHD to the spring couplers. Custom sizes and bulk pricing available. Additional couplers (HHDCOUPLER - 2 pack) are available. Flat Wire Brush Electrodes HHD Flat Brush 51 mm/2” HHDFLTBRSH2 HHD Flat Brush 152 mm/6” HHDFLTBRSH6 HHD Flat Brush 203 mm/8” HHDFLTBRSH8 HHD Flat Brush 305 mm/12” HHDFLTBRSH12 HHD Flat Brush 610 mm/24” HHDFLTBRSH24 HHD Flat Brush 914 mm/36” HHDFLTBRSH36 HHD Flat Brush 1219 mm/48” HHDFLTBRSH48 Half-Circle Neoprene Brush Electrode Half-Circle Neoprene Brush for 50-127 mm/2-5" pipe OD HHDHCBRSH5 Accessories Rolling Spring Electrodes Steel pipe electrodes-assorted sizes available: 10 to 60 cm (4 – 24”) Rolling springs include two pre-installed spring couplers Flat Wire Brush Electrodes Stainless steel-assorted sizes available: 5 to 120 cm (2 – 48”) Replacement Fan Brush Electrode Stainless steel-5 cm (2”) Handheld Wand Converts the PosiTest HHD to a wand-type instrument *PosiTest HHD sold separately Extension Rods Choose between 13 cm (5") and 50 cm (20") rods Electrode Adaptors Connect to spring and brush electrodes from other manufacturers PosiTest HHD Verifier Standalone voltmeter (crest meter, jeep meter) for verifying the accuracy and operation of ALL pulse type and DC holiday detectors Spring Couplers Thread onto rolling springs and attach to the Spring Connector Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes HHD Half-Circle Neoprene Brush 50–127mm/2-5" Neoprene half-circle brush electrode for PosiTest HHD series - good for pipes 50 to 127 mm / 2 to 5 inches Downloads DeFelsko PosiTest HHD High Voltage Holiday Detector - Data Sheet DeFelsko PosiTest HHD High Voltage Holiday Detector - Instruction Manual English, Spanish, German, French DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Chinese DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Arabic DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Korean Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdkitb-positest-hhd-basic-kit-high-voltage-holiday-detector-p-1950.html Thu, 21 Mar 2024 04:42:42 +0000 USD 1950 DeFelsko 991 HHDKITB https://www.abqindustrial.net/store/images/defelsko-positest-hhdkit.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/straightpoint-colt-clamp-on-line-tensionmeter-p-1949.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1949 ]]>StraightPoint COLT Clamp On Line Tensionmeter Unlimited wire rope calibration database via Android or iOS app Main swivel joints fitted with high quality bearings Lever ratio of 5.3:1 allows effortless, safe, clamping onto pre-tensioned wire ropes The new StraightPoint COLT Clamp On Line Tensionmeter is designed for fast and accurate measurement of wire rope tensions up to 11,000 lbf / 5000 kgf on cables up to 1" / 25mm diameter. Constructed from aerospace grade aluminum the COLT digital tension meter is lightweight and easy to handle and operates on wires that are already under tension. Once in place it allows the operator to quickly check tension on cables or wire ropes set at any angle. A built-in high accuracy, Bluetooth module transmits load data wirelessly to any smart device running our Android or iOS app. An adjustable device holder allows the COLT to be used as a traditional tension meter with on board display or the smartphone maybe handheld or mounted elsewhere. Kit Contents StraightPoint COLT Clamp On Line Tensionmeter Proof test certificate Instruction Manual Carry / Storage Case Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Features Unlimited wire rope calibration database via Android or iOS app Main swivel joints fitted with high quality bearings Lever ratio of 5.3:1 allows effortless, safe, clamping onto pre-tensioned wire ropes Wireless Bluetooth 4.1 enabling operator to stand at safe distance up to 328 feet or 100 metres Quick intuitive adjustable centre sheave makes changing wire rope sizes fast and easy No easily broken external antennae High waterproof resistant design IP67 or NEMA6 for all weather use Massive battery life of 1000 hours operational time As the library of wire rope diameters and constructions is increased each app user will benefit when they update and receive any new data. Cable gauge included. Applications Guy wire maintenance on cell towers, bridges, flare stacks, antennas & masts. Guy wire Tower Plumb & Tension EHS guy wire, Turnbuckle tensioner. Wire rope installations, comparing, equalising & measuring Architectural wire rope installations Median cable barrier tensioning Utility cable overhead line monitoring Elevator hoist, governor & compensating wire rope maintenance Zip lines & assault course testing Fall arrest systems Metro, tram and rail transit electric wires & catenary testing Ski lifts Wire rope tie downs on vessels (using Tirfor) Testing tension of ship mast wire ropes. Tensioned trellis systems Measuring Line Sag Specifications Units kg, lbs, tonne and kN Accuracy ± 3% of full scale if wire rope ⌀ and construction known Min Wire Rope ⌀ ⌀3/16" / ⌀5mm Max Wire Rope ⌀ ⌀1" / ⌀25mm Max Line Reduction 7/32" with a ⌀3/8" wire rope / 5mm with a ⌀10mm wire rope Wire Rope Database Infinite via Android 4.4 or iOS 8.0 app Weight 7.7lbs / 3.5kg Battery Type 2x C cell batteries Battery Life 2400 hours Bluetooth transmission time Operating Temp -13°F to +158°F / -25°C to +70°C Protection NEMA 6 / IP67 Communication Bluetooth 4.1 Standard Accessories Proof test certificate, operation manual, carrying/storage case Shipping Size 26.8" x 15.7" x 8.3" (68 x 40 x 21 cm) Shipping Weight 21 Lbs (9.5 Kg) Verification Tool - CVT In order to ensure the COLTS accuracy measurements are as accurate as possible, SP also supply a calibration verification rod that is specifically designed to check the COLTS calibration accuracy. The calibration verification checking process is quick and simple. Open the COLT app on your smart mobile device, connect to the COLT device via Bluetooth, and select ‘Cal Check’ within the ‘Rope’ menu section of the app. Place COLT on a flat surface and then zero the measurement on screen. Place the 20 inch steel rod in the centre of all 3 sheaves and apply loading arm until it is fully engaged with the magnetic catch. The force measurement reading should read as 3000lbs (within an accuracy range of ). If the measurement is greater than 3% difference (above 3090lbs or below 2910lbs) then you will need to contact SP and arrange for the COLT to be sent back to SP for recalibration. The process is as simple as that! Watch our demonstration video. Dimensions A 23.2" 589 mm B 10.0" 254 mm C 7.9" 200 mm D 7.9" 200 mm Downloads StraightPoint COLT Clamp On Line Tensionmeter - Data Sheet StraightPoint COLT Clamp On Line Tensionmeter - Instruction Manual StraightPoint COLT Clamp On Line Tensionmeter - App Wire Rope Library Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/straightpoint-colt-clamp-on-line-tensionmeter-p-1949.html Thu, 10 Aug 2023 04:31:55 +0000 USD 1949 Straightpoint 1000 COLT https://www.abqindustrial.net/store/images/straightpoint-colt-clamp-online-tensionmeter.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-crosby-shackles-for-rlp-cp-llp-and-wlp-dynamometers-p-1948.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1948 ]]>StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers Approved for use from -40°F (-40°C) up to 400°F (204°C) Proof-tested multiple times to insure reliable load holding capability The StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers is optionally available for use with our complete line of Dynamometers including the Radiolink Plus, Compound Plus, Loadlink Plus, and Wirelink Plus. They are offered in a wide range of capacities from 3.25 Ton (for Dynamometers rated for 1T or 2.5T capacity) up to 600 Ton (For Dynamometers rated up to 500T). Typically, a set of two shackles would be required for use on any one Dynamometer. Refer to the product listing below to help select the suitable set of shackles. Features Approved for use from -40°F (-40°C) up to 400°F (204°C) Proof-tested multiple times to insure reliable load holding capability Fabricated from Carbon Steel with Galvanized Coating Red pins make them easy to see and identify Crosby® quality Made in the USA Ranges Part Number: Crosby Load (Ton) Models Weight 1262013 1T, 2.5T & 3.25T RLP, CP, LLP and WLP 5 Lbs 1262031 6.5T RLP, CP, LLP and WLP 8 Lbs 1262068 12T RLP, CP, LLP and WLP 16 Lbs 1262095 25T RLP, CP, LLP and WLP 45 Lbs 1021156 35T and 55T RLP, CP, LLP and WLP 65 Lbs 1021174 75T RLP, CP, LLP and WLP 112 Lbs 1021192 100T RLP, CP, LLP and WLP 185 Lbs 1021218 150T RLP, CP, LLP and WLP 327 Lbs 1021475 200T RLP, CP, LLP and WLP 458 Lbs 1021484 250T RLP, CP, LLP and WLP 600 1021493 300T RLP, CP, LLP and WLP 800 Lbs 1021352 500T RLP, CP, LLP and WLP 2132 Lbs Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-crosby-shackles-for-rlp-cp-llp-and-wlp-dynamometers-p-1948.html Wed, 03 Jan 2024 22:28:40 +0000 USD 1948 Straightpoint 996 Shackles https://www.abqindustrial.net/store/images/straightpoint-crosby-shackles.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-ni-compression-wired-compression-load-cell-p-1947.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1947 ]]>StraightPoint NI-Compression Wired Compression Load Cell Accuracy of ±0.1% Full Scale Environmentally sealed to IP67/NEMA6 Machined from high grade stainless steel with 3:1 Safety Factor The StraightPoint NI-Compression Wired Compression Load Cell is available in ranges from 5te to 1000te. Straightpoint compression load cells are manufactured to the same stringent standards as all Straightpoint products. The bodies are machined from high grade stainless steel, offering excellent strength and anti-corrosion properties. Compression load cells can be supplied with optional loadcaps to protect objects being tested. The compact lightweight design provides ease of use and superior portability, allowing Straightpoint compression load cells to be used in a broad range of industries including mining, energy, defence, heavy rigging, shipping, and general transportation sectors. Utilising the same advanced microprocessor based electronics as all Straightpoint products, Straightpoint’s compression load cells benefit from high sampling rates, extreme resistance to industrial level noise and unprecedented stability. This high stability gives this product over 5,000 divisions and the highest standard resolution of any high capacity compression load cell on the market today. Like all Straightpoint products, Straightpoint compression load cells offer robust construction, advanced electronics, industry leading resolution and accuracy. Kit Contents Straightpoint NI Compression Wired Compression Load Cell 10 Metres / 30 Feet Cable Proof test certificate Operator Manual Carry / Storage Case Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Complies with ASME B30.26 Design validated by F.E.A. Features Compact size Environmentally sealed to IP67/NEMA6 Optional analogue outputs Stainless steel element High accuracy Lightweight Unrivalled resolution Custom versions available Applications Pre-lift weight and centre of gravity calculations for large plant and equipment Hydraulic and Pneumatic Press Force Verification and Calibration Structural Weighing and Center of Gravity Calculation Bridge Construction and Performance Load Monitoring Tank/Silo/Hopper Measurement Vehicle Weighing Large Scale Industrial Tank/Silo/ Hopper Filling and Dosing Measurement Structural Testing Research and Development Aircraft Weighing Material Force Testing / Concrete Crush Testing Wind Tower Load Monitoring Heavy Construction Pile driving Used alongside Self-propelled modular trailer (SPMT) when moving heavy loads. Specifications Accuracy +/- 0.1% of Full Scale Protection NEMA 6 / IP67 Safety Factor 3:1 Housing Material Stainless Steel Outputs Connection to HHP Indicator or External Amplifier (Analog Outputs) Operating Temp 14 to 122˚F / -10 to +50 °C Models Ranges 5 Ton (11,000 Lbs) up to 1000 Ton (2,200,000 Lbs) Battery Type Loadcell 4x AA Alkaline Comparison Chart Part Number:SPCrosby Capacity Resolution Weight NI5TC2789068 5 te11000 lb 0.001 te2 lb 6.2 kg13.64 lb NI10TC2789062 10 te22000 lb 0.002 te5 lb 6.2 kg13.64 lb NI25TC2789065 25 te55000 lb 0.005 te10 lb 6.2 kg13.64 lb NI50TC2789067 50 te110,000 lb 0.01 te20 lb 6.2 kg13.64 lb NI100TC2789061 100 te220,000 lb 0.05 te100 lb 15.5 kg34 lb NI150TC2789063 150 te330,000 lb 0.05 te100 lb 15.5 kg34 lb NI300TC2789064 300 te660,000 lb 0.1 te200 lb 65 kg143 lb NI500TC2789066 500 te110,0000 lbs 0.2 te500 lb 65 kg143 lb WNI1000TC2789275 1000 te2200000 lbs 0.5 te1000 lb 172 kg379 lb Dimensions Part Number Dimensions SPCrosby ØA B ØD E F G H NI5TC2789068 1024.02 1275.00 592.32 160.63 M18 x 2.5 1525.98 1586.22 NI10TC2789062 1024.02 1275.00 592.32 160.63 M18 x 2.5 1525.98 1586.22 NI25TC2789065 1024.02 1275.00 592.32 160.63 M18 x 2.5 1525.98 1586.22 NI50TC2789067 1024.02 1275.00 592.32 160.63 M20 x 2.5 1525.98 1586.22 NI100TC2789061 1525.98 1847.24 803.15 261.02 M20 x 2.5 43217.01 2048.03 NI150TC2789063 1525.98 1847.24 803.15 261.02 M20 x 2.5 43217.01 2048.03 NI300TC2789064 1857.28 30011.81 1556.10 27.51.08 M20 x 2.5 43217.01 2379.33 NI500TC2789066 1857.28 30011.81 1556.10 27.51.08 M20 x 2.5 43217.01 2379.33 WNI1000TC2789275 36214.25 31012.20 27010.63 401.57 M30 x 3.5 95037.40 41616.38 Downloads StraightPoint NI Compression Wired Compression Load Cell - Data Sheet StraightPoint NI Compression Wired Compression Load Cell - Instruction Manual StraightPoint NI Compression Wired Compression Load Cell - Safety Guide Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-ni-compression-wired-compression-load-cell-p-1947.html Wed, 03 Jan 2024 23:47:40 +0000 USD 1947 Straightpoint 1000 NI-Compression https://www.abqindustrial.net/store/images/ni-compression-wired-compression-load-cell.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-cablesafe-rope-tension-meter-p-1946.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1946 ]]>Straightpoint CableSafe Rope Tension Meter Remote monitoring & recording using FREE smart phone App via Bluetooth HHP App offers realtime display of data (with user-selected units of Te, Kg, kN, and Lb) HHP App also offers continuous datalogging into a user-named file The Straightpoint CableSafe Rope Tension Meter is the continued evolution of SP’s running line tensiometers. Compatible with a wide range of rope and electrical cable diameters – 4-30mm. When using a capstan winch to unwind electrical cable from a reel/spool, you will be able to integrate the CableSafe within this setup to ensure that it is being pulled at a safe tension level. This helps the line maintain its transmissions capability, prevent it from becoming a fire hazard risk, and it also stops the need for furthering work in order to remove and replace it. The contractor is gifted with decreased liability and dramatically increased peace of mind. Ideal for the following applications: Measure tension when pulling electrical cables – protect against fractures or elongation Measuring tension on synthetic rope when erecting delicate structures using gin poles and capstan winch Another example of best use is during the installation of cell phone towers or similar delicate structures. You will be able to use the product to help ensure structure-to-ground ropes, connected to a gin pole and pully system, do not exceed maximum tension whilst lifting sections of the tower to the top. There can be the possibility of the rope becoming snagged and cause greater tension to be loaded upon the system. With heavy materials being lifted to great heights; this would create a major safety hazard leading to a catastrophic failure with the endangerment of lives. Avoid the unknown through accurate monitoring, especially when risks are high. What distinguishes it apart from previous versions of this type is the developed lightweight design that allows for easy transportation and usage. It also provides up to 500 hours battery life so that you can be assured that it won’t lose power before your work day has ended. The high level IP67/NEMA 6 ingress protection allows the product to be used in a variety of heavy weather conditions and dusty environments. These features, as a collective, means that it will be an invaluable and reliable tool in your work related armoury. The five wheel design and gravity catches with top sheave pins allows for fast and simple rope attachment setup that also eliminates errors normally caused by changes in the same diameter and sample rigidity. The accuracy is also improved over three wheel alternatives. When used with a cable/rope pulling device you can remotely monitor the tension on the line using your smart handheld device via a Bluetooth connection*. You will be able to locate yourself up to 50m/164ft away from the Cable Safe to allow you to survey job progress from a distance. Kit Contents Straightpoint CableSafe Rope Tension Meter Proof test certificate Operator Manual Carry / Storage Crate Features Compatible with a wide range of rope diameters – 4-30mm Rapid tension force measurement - Up to 600m per minute Able to use in all weather and air quality conditions Easy to install and replace batteries (4 x AA standard Alkaline) Fully constructed from light and durable brushed Anodised Aluminium Five wheel design improving accuracy (clear anodised) Linchpins are fitted to the top sheave pins make wire rope installation quick and simple IP67 ingress protection / NEMA 6 – heavy protection against dust and rain Simple to use and setup Remote monitoring option using smartphone via Bluetooth Maintenance-free heavy duty needle bearings Water weight Testing Overhead Weighing Loadcell Rental Bollard PullingTug Testing Stevedoring Heavy Lift Load sense on jib winches Ship to ship transfers (STS) Figure 8ing Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Specifications Accuracy +/- 2% of Full Scale Part Number Refer to Ranges Table Capacity Refer to Ranges Table Resolution 0.01t | 20lb Rope Diameter Refer to Ranges Table Weight 4.5kg | 10lb Battery Type 4 x AA Alkaline Battery Life 500hrs Operating Temp -10°C to +50°C / 14°F to 122°F Range Bluetooth 100m / 328ft Protection IP67 / NEMA 6 Maximum Fiber Speed 2000 ft/min (600 m/min) Related Products StraightPoint INSIGHT Software Straightpoint TIMH Running Line Tensiometer / Cable Tension Meter / Cable Tension Sensor Downloads Straightpoint CableSafe Rope Tension Meter - Data Sheet Straightpoint CableSafe Rope Tension Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-cablesafe-rope-tension-meter-p-1946.html Wed, 01 Dec 2021 19:35:32 +0000 USD 1946 Straightpoint 999 CableSafe https://www.abqindustrial.net/store/images/cablesafe-leader-rope-tension-sensor-meter.jpg Remote monitoring & recording using FREE smart phone App via Bluetooth

---

HHP App offers realtime display of data (with user-selected units of Te, Kg, kN, and Lb)

---

HHP App also offers continuous datalogging into a user-named file

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2005-motorized-precision-material-thickness-gauge-p-1945.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1945 ]]>Checkline D-2005 Motorized Precision Material Thickness Gauge Resolution 0.01 mm - standard, 0.001 mm - optional The Checkline D-2005 Motorized Precision Material Thickness Gauge has a stable and rigid base frame with an encapsulated, separate measuring block. And is a top choice if you appreciate high precision (up to 0.001 mm), easy operation, automatic processing and objective, reproducible measurement results. The device can be adapted to the materials to be measured according to your requirements. Thus, the calliper surfaces, the calliper materials and the measurement pressures fit in exactly with the guidelines of ISO, EN, DIN or also with your own test regulations. Common StandardsFor textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa and 1 kPa)For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa) For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa) The D-2005 device is also available with different measurement ranges:Ranges 0 – 10 mm, 0 – 25 mm and 0 – 50 mm (or with the equivalents in inch, switchable). With this instrument the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, rubber, plastic films etc. This alternative to the D-2010 does not have an illuminated, menu controlled touch-screen with its statistics functions, instead it is equipped with a dial gauge with seven-segment display and individual keys. Of course, there is a data output for the digital processing of the measurement results. The model D-2005 is also available with special equipment for calliper dwell time gauging range preselection. Kit Contents D-2005 Motorized Precision Material Thickness Gauge Sub-D9/USB adapter cable USB AC adapter AC adapter Switch pedal Calibration report of manufacturer Transport packing case Instruction Manual Features Rigid housing frame Separate measuring block, encased against outside external impacts, for highest accuracy and repeatability Optional: Preselection of the measuring range Optional: Adjustable dwell time Footpedal included Switch-selectable measuring units mm / inch Optional: software for data transfer and analysis - Part No. SW-50 Motor-driven calliper movement Seven-segment display Resolution 0.01 mm - standard, 0.001 mm - optional (0.001 mm is standard for D-2005-P, D-2005-F) Specifications Measuring Range 0 - 10 mm, (25 mm optional, Code E) Resolution 0.001 mm Accuracy ± 0.002 mm Depth of jaw 160 mm Measuring system Capazitive -> Sylvac Display LCD 6 digit, 8.5 mm high Measuring unit mm or inch Preselection of the measuring range Optional Feeler shape and surface pressure According international standards DIN, EN and ISO Adjustable dwell time Optional Output signal RS 232 for printer and USB for PC Temperature range 10 - 45 °C Air humidity Max. 85 % r.H Dimensions 300 x 210 x 300 mm (LxWxH) Weight, net (gross) 23 kg Available Models Model Standard Application Feeler Ø mm Feeler cm² Test Pressure D-2005-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa D-2005-V1 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.5 kPa D-2005-V2 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.1 and 0.5 kPa D-2005-G1 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa D-2005-G2 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa, 20 kPa and 200 kPa D-2005-NW EN ISO 9073-2 Non-woven textiles 56.42 25 0.5 kPa and 1 kPa D-2005-P* DIN EN ISO 534 Paper 16 2 50 kPa and 100 kPa D-2005-HY DIN EN ISO 54540 Hygienic paper 56.42 25 2 kPa D-2005-L DIN EN ISO 2589 Leather 10 0.785 49,1 kPa D-2005-Gi Rubber 35.68 10 5 kPa FeelerCalotte D-2005-F* DIN 53370 Foil R 30 mm 0.5 N *Resolution 0.001 mm is standard Options Code R Higher resolution 0.001 instead of 0.01 mm(0.001 mm is standard for D-2005-P, D-2005-F) Code E Extended measuring range 0 - 25 mm Code E2 Extended measuring range 0 - 50 mm Code D Adjustable dwell time Code D2 Adjustable dwell time & measurement range Code P External power supply of the display DKD-Cal Calibration report from a DKD authorized laboratory Code S Software & Cable Comparison Chart D-2000 D-2005 D-2010 D-2020 Touch screen with menu control in English or German - - Seven-segment display - - Display illumination - - Statistics display - - Automatic zero point control - - Preselection of the measurment cycles - - Preselection of the measuring range - optional Adjustable dwell time - optional Motor-driven caliper movement - Connection for pedal - Manual caliper movement via a control lever - - - Automatic material infeed, adjustable - - - Digital interface Available scale divisions 0.001 mm, 0.01 mm Possible measuring ranges 0 - 10 mm, 0 - 25 mm, 0 - 50 mm LxWxH (for 0 - 10 mm range) 300 x 240 x 300 mm 300 x 210 x 300 mm 300 x 200 x 300 mm 300 x 300 x 320 mm Weight (for 0 - 10 mm range) 22.5 kg 23.0 kg 24.0 kg 31.5 kg Downloads D-2005 Motorized Precision Material Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2005-motorized-precision-material-thickness-gauge-p-1945.html Sat, 06 Jul 2024 15:38:23 +0000 USD 1945 Checkline 1000 D-2005 https://www.abqindustrial.net/store/images/d-2005-motorized-precision-material-thickness-gauge.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-atex-ex-iecex-radiolink-plus-wireless-dynamometer-tension-loadcell-p-1936.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1936 ]]>Straightpoint ATEX / Ex IECEx Radiolink Plus Wireless Dynamometer Tension Loadcell ATEX / Ex Approved Intrinsically Safe Wireless Dynamometer Capacities up to 300 Tonnes / 660,000 lbs The Straightpoint ATEX / Ex IECEx Radiolink Plus Wireless Dynamometer Tension Loadcell is approved to Ex ia II C T4 Ga for use in zone 0,1 & 2 hazardous environments (gas). This new version of the bestselling Radiolink plus is capable of both weighing and dynamic load monitoring in hazardous environments such as on and offshore oil, gas and chemical industries in zones classified 0,1 & 2. Ex-Proof construction. Available from stock in capacities from 1t to 300t, constructed from high-quality aircraft grade aluminum and featuring an advanced internal design structure. This internal design structure not only provides the product with an unrivaled strength to weight ratio but also allows the use of a separate internal sealed enclosure providing the load cell's electronic components with IP67/NEMA6 environmental protection even with the battery cover plate missing, making this industry leading dynamometer even more suitable for use in the harshest environments. Featuring industry leading wireless technology and range, the versatile Radiolink plus ATEX is supplied with an update rate of 3Hz and can be easily configured to run at industry leading speeds of up to 200Hz. Data is transmitted wirelessly utilizing the latest in IEEE 802.15.4 (2.4 GHz) technology providing safe, high integrity, error free transmission of both static weight and dynamic load to an ATEX/IECEx approved wireless handheld controller, the SW-HHP-ATEX. The Radiolink Plus ATEX utilizes easily sourced Energizer® Ultimate Lithium AA Batteries. Advanced circuitry extends battery life and the use of easily sourced alkaline batteries eliminates issues associated with rechargeable battery pack charging, failure and replacement. The Radiolink plus-ATEX is the number one choice for weighing and dynamic load monitoring in hazardous applications. Certificate references: RLP- ATEX IECEx SIR 15.0071X Sira 15ATEX2195X SW-HHP-ATEX IECEx SIR 15.0072X Sira 15ATEX2196X (See below attachments for QAN and QAR reports) Features All models are supplied with a Traceable Calibration Certificate ATEX Certified approved for use in hazardous zones 2, 1 and 0 All Radiolink Plus ATEX Dynamometers are Environmentally Sealed, IP67 / NEMA 6 Rated (Waterproof) All Radiolink Plus ATEX Dynamometers are supplied with the battery-powered SW-HHP-ATEX Handheld Remote Display 2.4 GHz Wireless with Industry Leading Wireless Range of 2300 ft (700 meters) User-selctable units (Lbs, Kg, kN, Tonne) with highest resolution SW-HHP-ATEX Hand-Held Display includes remote On/Off, peak hold and pre-set tare functions SW-HHP-ATEX Hand-Held Remote Display has ATEX/IECEx Ex ia IIC T4 Ga Zone 0 rating (IECEx SIR 15.0072X / Sira 15ATEX2196X) Long Battery Life - Remote Display 60 Hrs / Loadcell 1200 Hrs continuous use Internal Antennae Design validated by Finite Element Analysis (FEA) "-WS" models are supplied with two (2) shackles, refer to BUY NOW Section at bottom of page Warranty 1-Year (FREE Extension to 2-Year Warranty with Product Registration) Made in the UK Specifications Approval Spec Ex ia II C T4 Ga for use in zone 2, 1 & 0 Battery Type Remote Display 2 x AA / Loadcell 4 x AA Battery Life Remote Display 400Hrs / Loadcell 1200Hrs continuous Accuracy +/- 0.1% of Full Scale Wireless Range 2300 Feet (700 metres) Display Type 6 digit LCD 0.9 inch height (22mm) Operating Temp 14°F to 122°F (-10 to +50 °C) Radio Frequency 2.4GHz Data Transmission Rate 3Hz up to 200Hz can be ordered for dynamic load monitorning applications Protection IP67 / NEMA 6 Ranges Model Capacity Res Safety Factor Load Pin Dia. RLP1T-TS-ATEX 2000 lb 1000 kg 1 lb 0.5 kg 12:1 3/4 In 19 mm RLP2T5-TS-ATEX 5500 lb 2.5 te 2 lb 0.001 te 5:1 3/4 In 19 mm RLP5T-TS-ATEX 11000 lb 5 te 2 lb 0.001 te 5:1 1 In 25 mm RLP12T-TS-ATEX 26000 lb 12 te 5 lb 0.002 te 5:1 1-3/8 In 35 mm RLP25T-TS-ATEX 55000 lb 25 te 10 lb 0.005 te 5:1 2 In 51 mm RLP35T-TS-ATEX 77000 lb 35 te 10 lb 0.005 te 5:1 2-1/4 In 57 mm RLP75T-TS-ATEX 165000 lb 75 te 20 lb 0.01 te 5:1 2-3/4 In 70 mm RLP100T-TS-ATEX 220000 lb 100 te 100 lb 0.05 te 5:1 3-1/4 In 83 mm RLP150T-TS-ATEX 330000 lb 150 te 100 lb 0.05 te 4:1 3-3/4 In 95 mm RLP200T-TS-ATEX 440000 lb 200 te 200 lb 0.1 te 5:1 4-3/4 In 121 mm RLP250T-TS-ATEX 550000 lb 250 te 200 lb 0.1 te 4:1 5 In 127 mm RLP300T-TS-ATEX 660000 lb 300 te 200 lb 0.1 te 5:1 6 In 152 mm Related Products LoadLink-Plus Digital Dynamometer Tension Loadcell SW-A01i Wireless Base Station with Analogue Output StraightPoint INSIGHT Software StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers Downloads Straightpoint Radiolink Plus ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell - Data Sheet Straightpoint Radiolink Plus ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell - ATEX QAN Report Straightpoint Radiolink Plus ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell - IECEx QAR Report Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-atex-ex-iecex-radiolink-plus-wireless-dynamometer-tension-loadcell-p-1936.html Tue, 12 Apr 2022 12:13:44 +0000 USD 1936 Straightpoint 1000 RLP-ATEX https://www.abqindustrial.net/store/images/straightpoint-radiolink-plus-atex-ex-iecex-wireless-dynamometer-tension-loadcell.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-loadlink-plus-digital-dynamometer-tension-loadcell-p-1935.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1935 ]]>Straightpoint LoadLink Plus Digital Dynamometer Tension Loadcell Digital Dynamometer with Built-In Display Capacities up to 300 Tonnes / 660,000 lbs The Straightpoint LoadLink Plus Digital Dynamometer Tension Loadcell is designed for weighing and dynamic load monitoring in a wide range of applications. It has been in production and supplied globally to the lifting and rigging industry since 1979. The Loadlink plus has an easy to read LCD display and push button operation for a host of features demanded by operators worldwide. This range of digital dynamometer load cells are used on a daily basis for load monitoring, weighing and heavy lifts ranging in capacity from 1 to 300 tonnes, by a variety of industries including rigging, shipping, transportation, offshore and onshore oil and gas, utilities, aerospace and mining. The Loadlink plus is manufactured from high-quality and high-tensile aircraft grade aluminum. Due to this manufacturing process Straightpoint Loadlink digital dynamometer load cells are on average 30% lighter than our closest competitor with the same safety rating making them idea for portable load testing. Thirty years of experience manufacturing this rugged, lightweight loadcell with advanced electronics and full feature display make the Loadlink Plus the number one product for the lifting and rigging industry worldwide. Kit Contents Straightpoint LoadLink-Plus Digital Dynamometer Tension Loadcell RFID tag Calibration Certificate Instruction Manual Models up to 35T/77,000lbs are supplied in foam fitted carrying cases. Larger capacities are supplied in an approved shipping crate Features Large easy to read LCD Display High Accuracy of ±0.1% full scale Selectable Units - t, lbs, kg or kN High Resolution, 5000 divisions as standard Peak Hold – 100Hz peak force analysis Tare and Preset tare Lightweight due to aluminum construction Overload Counter – ideal for rental industry 90 db Audible Set Point Alarm to warn operator of overload RS-485 Serial Output to connect to Handheld plus or Desktop Controller Designed for use with standard Crosby or Green Pin Shackles Complete Design of load cell has been validated by Finite Element Analysis "-WS" models are supplied with two (2) shackles, refer to BUY NOW Section at bottom of page Bluetooth Option allows user to use Free App for wither Android or IOS Smarphones to view, log and transfer data via email or text. This eliminates the need for using a separate Hand-Held indicator. DNV Type Approval (DNVGL-ST-0378 – Standard for offshore and platform lifting appliances) Environmental protection rating of IP65 / NEMA5 Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Made in the UK Specifications Accuracy +/- 0.1% of Full Scale Battery Type 9v PP3 Battery Life 80 hours continuous Display Type 6 digit 1 inch LCD (25mm) Operating Temp 14°F to 122°F (-10°C to +50°C) Protection Sensor IP65 / NEMA5 Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Ranges Model Capacity Res. Weight Safety Factor Load Pin Diameter Overall Height LLP1T 2000 lb 1000 kg 1 lb 0.5 kg 3.1 lb 1.4 kg 12:1 3/4 In 19 mm 8.03" 204 mm LLP2T5 5500 lb 2.5 te 2 lb 0.001 te 3.1 lb 1.4 kg 5:1 3/4 In 19 mm 8.03" 204 mm LLP5T 11000 lb 5 te 2 lb 0.001 te 4.4 lb 2 kg 5:1 1 In 25 mm 9.80" 249 mm LLP12T 26000 lb 12 te 5 lb 0.002 te 7.1 lb 3.2 Kg 5:1 1-3/8 In 35 mm 12.01" 305 mm LLP25T 55000 lb 25 te 10 lb 0.005 te 11 lb 5 kg 5:1 2 In 51 mm 13.39" 340 mm LLP35T 77000 lb 35 te 10 lb 0.005 te 19 lb 8.6 kg 5:1 2-1/4 In 57 mm 15.47" 393 mm LLP50T 110000 lb 50 te 20 lb 0.01 te 25.3 lb 11.5 kg 5:1 2-1/4 In 57 mm 16.69" 424 mm LLP75T 165000 lb 75 te 20 lb 0.01 te 35.3 lb 16 kg 5:1 2-3/4 In 70 mm 18.50" 470 mm LLP100T 220000 lb 100 te 100 lb 0.05 te 75 lb 34 kg 5:1 3-1/4 In 83 mm 23.94" 608 mm LLP150T 330000 lb 150 te 100 lb 0.05 te 101.4 lb 46 kg 4:1 3-3/4 In 95 mm 26.38" 670 mm LLP200T 440000 lb 200 te 200 lb 0.1 te 158.7 lb 72 kg 5:1 4-3/4 In 121 mm 27.56" 700 mm LLP250T 550000 lb 250 te 200 lb 0.1 te 158.7 lb 72 kg 4:1 5 In 127 mm 27.56" 700 mm LLP300T 660000 lb 300 te 200 lb 0.1 te 260 lb 118 kg 5:1 6 In 152 mm 31.73" 806 mm Related Products Radiolink-Plus-ATEX ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell ATEX Certified approved for use in hazardous zones 2, 1 and 0 SW-A01i Wireless Base Station with Analogue Output StraightPoint INSIGHT Software StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers Downloads Straightpoint LoadLink Plus Digital Dynamometer Tension Loadcell - Data Sheet Straightpoint LoadLink Plus Digital Dynamometer Tension Loadcell - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-loadlink-plus-digital-dynamometer-tension-loadcell-p-1935.html Wed, 03 Jan 2024 23:39:17 +0000 USD 1935 Straightpoint 1000 LLP https://www.abqindustrial.net/store/images/loadlink-plus-digital-dynamometer.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-radiolink-compound-plus-wireless-dynamometer-p-1934.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1934 ]]>Straightpoint RadioLink Compound Plus Wireless Dynamometer Wireless Dynamometer without hand-held digital display Capacities up to 300 Ton (660,000 lbs) Optional Bluetooth Output for connection to the free HHP APP Connect up to 126 Compound Plus Loadcells to a single PC with INSIGHT Software The Straightpoint RadioLink Compound Plus (CP) Wireless Dynamometer is designed for weighing and dynamic load monitoring in a wide range of applications. All Compound Plus Dynamometers are supplied with 2.4GHz Wireless Output for connection to the optional battery-powered SW-HHP Handheld Display or INSIGHT Multiple Wireless Loadcell Software. There is also a version "-BLE" providing a Bluetooth Output for connection to the no-cost HHP App for Apple and Android Phones and Tablets. The Compound Plus (CP) wireless dynamometer is the same as a Radiolink Plus but supplied without the SW-HHP Hand-Held Indicator. The CP is constructed of high-quality aircraft-grade aluminum and features an advanced internal design structure. The design not only provides an unrivaled strength to weight ratio but also allows the use of a separate internal sealed enclosure providing the load cell's electronic components with IP67 environmental protection even with the battery cover plate missing, making this industry-leading dynamometer even more suitable for use in the harshest environments. When supplied with the 2.4GHz wireless output the CP featured industry-leading wireless technology and range, has an update rate of 3Hz and can be easily configured to run at industry-leading speeds of up to 200Hz. Data is transmitted wirelessly utilizing the latest in IEEE 802.15.4 (2.4 GHz) technology providing safe, high integrity, error-free transmission of both static weight and dynamic load to a wireless handheld controller. The long-range Bluetooth signal connects to any iOS or Android device that has our free HHP app installed, providing the operator with a wireless range of up to 328ft / 100m. This allows them to stand in a safe position away from the load, with no requirement to read directly from the dynamometer. The app will also allow the operator to log data versus time, or on events such as over or underload. An adjustable alarm will alert the operator on their smartphone if any overload is occurring. Designed for measurement of both Static and Dynamic Loads the Compound Plus can also be used in combination with our range of high-speed wireless data logging software allowing for simultaneous control, display and real-time data logging of up to 100 Straightpoint telemetry Load Cells. A .csv file format is used for data logging and opens in MS Excel allowing the easy visual presentation of the logged data and simple test certificate generation. The Compound Plus utilizes easily sourced AA alkaline batteries. Advanced circuitry extends battery life and the use of easily sourced alkaline batteries eliminates issues associated with rechargeable battery pack charging, failure, and replacement. A full array of wireless accessories are also available including signal boosters, LED wireless scoreboards and base stations with analog (4-20mA, 0-10v, 0-5v) or digital (RS232/485, Modbus RTU, and ASCII serial communications protocol) outputs. The CP Compound Plus Dynamometer Loadcells are supplied without the SW-HHP Wireless Hand-Held Indicator or Software. Both are available for purchase as an option. Kit Contents RadioLink Compound Plus 4x AA batteries RFID tag Calibration certificate Instruction Manual Models up to 35T/77,000lbs are supplied in foam fitted carrying cases. Larger capacities are supplied in an approved shipping crate Shackles are not included Features Supplied with a Traceable Calibration Certificate Accuracy of ±0.1% full scale with a safety factor of 4:1 up to 12:1 (depends on capacity) 2.4GHz Wireless Output for connection to the optional battery-powered SW-HHP Handheld Display or SW-MWLC Multiple Wireless Loadcell Software 2.4GHz Wiresless Output features a transmission distance of 2300 Ft (700 meters) "-BLE" Bluetooth Output for connection to the no-cost HHP App for Apple and Android Phones and Tablets. The Bluetooth Output features a transmission distance of 328 Ft (100 meters) Compound Plus Housing is IP 67 Rated (NEMA6) for use in the harshest indoor & outdoor environments Battery life of 1200 hours continuous use using 4x AA Alkaline Batteries DNV Type Approval (DNVGL-ST-0378 – Standard for offshore and platform lifting appliances) Uses powerful "internal" antenna eliminating the possibility to damage it Uses standard Crosby Shackles, optional Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Made in the UK Specifications Accuracy ±0.1% full scale Safety Factor 4:1 up to 12:1 (depends on capacity) Battery Life 1200 Hrs (continuous use) Battery Type Remote Display 2 x AA / Loadcell 4 x AA Display Type 6 digit 0.9 inch LCD (22mm) Operating Temp 14°F to 122°F (-10°C to +50°C) Radio Frequency 2.4GHz Wireless Range 2300 feet (700 meters) Bluetooth Range 328 Ft (100 meters), requires "-BLE" version with Bluetooth output Data Transmission Rate 3Hz up to 200Hz can be ordered for dynamic load monitorning applications Housing Protection Sensor IP67 / NEMA 6 (Waterproof) Warranty 2-Years Comparison Chart SP Crosby Capacity Res. Units Weight Safety Factor CP1T 2789018 1,000kg 2200 lb 0.5 kg 1 lb kg lb 1.5 kg 3.3 lb 12:1 CP2T5 2789022 2.5 te 5500 lb 0.001 te 2 lb te lb 1.5 kg 3.3 lb 7:1 CP6T5 2789027 6.5 te 14300 lb 0.001 te 2 lb te lb 2.4 kg 5.3 lb 7:1 CP12T 2789016 12 te 26000 lb 0.002 te 5 lb te lb 3.7 kg 8.2 lb 7:1 CP25T 2789021 25 te 55000 lb 0.005 te 10 lb te lb 5 kg 11 lb 5:1 CP35T 2789024 35 te 77000 lb 0.005 te 10 lb te lb 8.6 kg 19 lb 5:1 CP55T 2789026 55 te 120000 lb 0.01 te 20 lb te lb 13 kg 28.7 lb 5:1 CP75T 2789028 75 te 165000 lb 0.01 te 20 lb te lb 16 kg 35.3 lb 5:1 CP100T 2789001 100 te 220000 lb 0.05 te 100 lb te lb 34 kg 75 lb 5:1 CP150T 2789017 150 te 330000 lb 0.05 te 100 lb te lb 46 kg 101.4 lb 4:1 CP200T 2789019 200 te 440000 lb 0.1 te 200 lb te lb 82 kg 180.8 lb 5:1 CP250T 2789020 250 te 550000 lb 0.1 te 200 lb te lb 82 kg 180.8 lb 4:1 CP300T 2789023 300 te 660000 lb 0.1 te 200 lb te lb 118 kg 260 lb 5:1 CP500T 2789025 500 te 1100000 lb 0.1 te 200 lb te lb 248 kg 546.7 lb 5:1 Related Products Radiolink-Plus-ATEX ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell ATEX Certified approved for use in hazardous zones 2, 1 and 0 LoadLink-Plus Digital Dynamometer Tension Loadcell SW-A01i Wireless Base Station with Analogue Output StraightPoint INSIGHT Software StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers Downloads Straightpoint RadioLink Compound Plus - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-radiolink-compound-plus-wireless-dynamometer-p-1934.html Wed, 01 Dec 2021 19:32:45 +0000 USD 1934 Straightpoint 1000 CPT https://www.abqindustrial.net/store/images/radiolink-compound-plus-wireless-dynamometer.jpg Wireless Dynamometer without hand-held digital display

---

Capacities up to 300 Ton (660,000 lbs)

---

Optional Bluetooth Output for connection to the free HHP APP

---

Connect up to 126 Compound Plus Loadcells to a single PC with INSIGHT Software

---

]]> https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-wib-wireless-arborist-impact-block-load-cell-p-1933.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1933 ]]>Straightpoint WIB Wireless Arborist Impact Block Load Cell WIB6T Capacity: 6 tonnes / 60 kN / 13,227 lbs Max Rope Diameter: 3/4" (20 mm) Accuracy of ±0.1% full scale with 5:1 Safety Factor WIB6T Capacity: 6 tonnes / 60 kN / 13,227 lbs Max Rope Diameter: 3/4" (20 mm) The safest choice for the working Arborist. Manufactured in partnership with DMM, the Straightpoint WIB Wireless Arborist Impact Block Load Cell has been designed to deliver the best performance in terms of alignment, resistance, and appeal. The aesthetic curves of the Impact Block combine beauty, strength, and durability to ensure a rope friendly surface. Coupled with wireless dynamic load monitoring electronics and strain gauge technology from Straightpoint and providing real-time data to either a handheld controller or logging via our INSIGHT software to tablet or laptop, it is easy to see why this is one of the most sought after products in the industry. Two versions of the WIB are available: 2.4GHz Wireless version providing high-speed sampling of 50 Hz (up to 200Hz) for dynamic load monitoring applications and industry-leading wireless range of 1000 m or 3280 ft designed for connection to the SW-HHP Hand-Held Indicator or IMPACT software. Bluetooth output version designed for connection to any smartphone or tablet running our free HHP app on iOS or Android sampling at 3 Hz with transmission ranges of 100m or 328ft. During development, the Straightpoint Impact Block has gone through a thorough dynamic and static validation testing regime. The end result is a highly functional product with an impressive strength to weight ratio. Coupled with wireless dynamic load monitoring electronics and strain gauge technology from Straightpoint and providing real-time data to either a handheld controller or logging via our INSIGHT software to tablet or laptop, it is easy to see why this is one of the most sought after products in the industry. During development, the Straightpoint Impact Block has gone through a thorough dynamic and static validation testing regime. The end result is a highly functional product with an impressive strength to weight ratio. The end result is a highly functional product with an impressive strength to weight ratio. Kit Contents Straightpoint WIB Wireless Arborist Impact Block Load Cell Proof test certificate Operator Manual Carry/Storage Case RFID Tagged Features Rounded edges to cheek plates maintain low rope abrasion when rope is fed ‘unfair’ Upper sheave opens via a threaded locking axle for added security Thrust surfaces increase tolerance to external loading of spindle and anchor pin Direct connection to cordage, the anchor slings helps ensure correct neighbour component compatibility 1000m or 3280ft wireless range enabling operator to stand at safe distance Massive battery life of 1200 hours operational time Handheld display or data logging software options for all applications Lightweight attachment sling facilitates hauling of block, sling and rope to the climber and helps with handling, in tree stowage and workshop storage No easily broken external antennae High waterproof resistance to IP67/NEMA6 for all weather use Tree care – dismantling ops and speed lines Forestry Winching operations Rescue Rigging Design validated by F.E.A. Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Specifications Capacity 6 tons / 60 kN / 13,227 lbs Resolution 0.01 t / 0.1kN / 20 Lbs Accuracy ±0.1% full scale Safety factor 5:1 Battery Type 4x AA Alkaline Battery Life - 2.4Ghz Wireless 1200 Hrs, continuous use Battery Life - Bluetooth 500 Hrs, continuous use Operating Temp -10 to 50 C / 14 to 122 F Wireless Frequency 2.4GHz Transmission Distance (2.4GHz) 1000 meters (3280 ft), line-of-sight Transmission Distance (Bluetooth) 100 meters (328 ft) Data Sampling Rate (2.4GHz) 50Hz (standard) up to 200Hz (optional) for dynamic load monitoring applications Data Sampling Rate (Bluetooth) 3Hz (= 3 samples/second) Environmental Protection IP67 or NEMA6 Max Rope Diameter 20 mm (3/4") Weight 6kg / 13 lb Dimensions 13.7” x 5.16” x 3.5” (348 x 131 x 89 mm) download detailed dimensional drawing below Downloads Straightpoint WIB Wireless Arborist Impact Block Load Cell - Data Sheet Straightpoint WIB Wireless Arborist Impact Block Load Cell - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-wib-wireless-arborist-impact-block-load-cell-p-1933.html Wed, 01 Dec 2021 19:30:34 +0000 USD 1933 Straightpoint 1000 WIB https://www.abqindustrial.net/store/images/straightpoint-wib-wireless-arborist-impact-block-load-cell.jpg WIB6T Capacity: 6 tonnes / 60 kN / 13,227 lbs

---

Max Rope Diameter: 3/4" (20 mm)

---

Accuracy of ±0.1% full scale with 5:1 Safety Factor

---

]]> https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-towcell-bluetooth-towbar-load-cell-tow-hitch-dynamometer-p-1932.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1932 ]]>Straightpoint Towcell-Bluetooth Towbar Load Cell, Tow Hitch Dynamometer Wireless Load Cell for Monitoring Towed Loads up to 25 kN / 2.8 tonnes Bluetooth Output with 100m or 328ft Wireless Range 5:1 Safety Factor The Straightpoint Towcell® wireless load cell is designed to monitor a vehicle's towed load up to 25 kN / 2.8 tonnes. Typical applications include emergency services, salvage, off-road and much more. The Towcell® allows for increased safety and the avoidance of costly overloads by providing real-time monitoring of tensile towing forces during recovery, clearance and salvage efforts. The Straightpoint Towcell® is rugged, lightweight, compact and can be installed, with ease, onto any tow bar, whether it’s a standard 52mm or 2” ball or pin assembly and is ready to use in seconds. Modeled after Straightpoint’s best-selling Radiolink plus, the Towcell® is constructed of high-quality aircraft-grade aluminum, featuring an advanced internal design structure providing the product with an unrivaled strength to weight ratio, and allowing for the use of a separate internal sealed enclosure. This internal sealed enclosure provides the internal electronic components with IP67/NEMA6 waterproof environmental protection even with the battery cover plate missing. Easily sourced AA alkaline batteries offer a massive battery life of 500 hours, the Towcell® utilizes an unbreakable internal antenna. Towcell® loads are displayed via Bluetooth SW-HHP App for Android and iOS devices. Kit Contents Straightpoint Towcell-Bluetooth Towbar Load Cell Proof test certificate Operator Manual Carry/Storage Case AA Alkaline Batteries RFID Tagged Features Unique design to fit any standard 2” tow-hitch Lightweight Internal antennae Compact size Bluetooth wireless communication Range 100m or 328ft Waterproof to IP67/NEMA6 Unmatched battery life of 500hrs Vehicle load monitoring Emergency services Rescue & Salvage 4 x 4 Events Design validated by F.E.A. Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Specifications Capacity 25 kN / 2.8 Tonnes Resolution 0.01 kN / 0.001 Tonnes Accuracy +/- 0.1% FS Weight 1.4 Kg / 3lbs Safety Factor 5:1 Battery Type 4x AA Battery Life 500 Hours Operating Temp -10°c to +50°c / 14˚ to 122˚F Wireless Range 100 metres / 328 feet Data Rate 50Hz Dimensions Refer to PDF Brochure Downloads Straightpoint Towbar Load Cell, Tow Hitch Dynamometer - Data Sheet Straightpoint Towbar Load Cell, Tow Hitch Dynamometer - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-towcell-bluetooth-towbar-load-cell-tow-hitch-dynamometer-p-1932.html Wed, 01 Dec 2021 19:31:11 +0000 USD 1932 Straightpoint 1000 Towcell-Bluetooth https://www.abqindustrial.net/store/images/towbar-load-cell-tow-hitch-dynamometer-01.jpg Wireless Load Cell for Monitoring Towed Loads up to 25 kN / 2.8 tonnes

---

Bluetooth Output with 100m or 328ft Wireless Range

---

5:1 Safety Factor

---

]]> https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/time3200-surface-roughness-tester-tr200-p-1931.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1931 ]]>The TIME3200 Surface Roughness Tester is designed to measure in Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk and Rmr units The TIME3200 Surface Roughness Tester is designed to measure in Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk and Rmr units. It is commonly used for testing roughness during the manufacturing processes as well as in test labs. Kit Contents TIME3200 Surface Roughness Tester TR200 Main unit TS100 standard pickup Roughness test plate Ra Battery Charger Protection Nose Steel support Dataview Communication cable Instruction manual Features High accuracy inductive pickup Large LCD display with backlight Pickup stylus position indicator RS232 data output Storage and review function for up to 15 groups data and graphs Conform to ISO standard, compatible with DIN, ANSI and JIS standard Powered by Li-Ion Battery Specifications Roughness parameters Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk, Rmr Assessed profiles Roughness profile (R) Primary profile (P) Units Metric, Imperial Display resolution 0.001 μm Data output RS232 Pickup measuring range ±20μm, ±40μm, ±80μm Cutoff length (L) 0.25mm / 0.8mm / 2.5mm/Auto Evaluation length 1~5L (selectable) Tracing length 3-7L(selectable) Digital filter RC, PC-RC, Gauss, D-P Max. tracing length 17.5mm/0.71inch Min. tracing length 1.3mm/0.052inch Pick-up Standard pickup TS100, inductive, diamond stylus radius 5μm, angle of stylus 90° Accuracy ≤±10% Repeatability ≤6% Power Li-ion battery rechargeable Dimensions (mm) 140×52×48 Weight (g) 440 Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/time3200-surface-roughness-tester-tr200-p-1931.html Thu, 20 Jul 2023 04:45:08 +0000 USD 1931 Time 999 TIME3200 https://www.abqindustrial.net/store/images/time3200-surface-roughness-tester.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/imada-nlh-horizontal-lever-test-stand-p-1930.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1930 ]]>Imada NLH Horizontal Lever Test Stand Maximum load 220 lbf (100 kgf) Stroke 2″ The Imada NLH-220 Horizontal Lever Operated Force Measurement Test Stand is designed for a wide range of tension and compression force testing applications. The rugged design provides maximum versatility and reliability. Rubber feet and a rugged metal construction provide a stable platform for tension or compression testing. The Imada NLH-220 is unaffected by gravity and does not employ a return spring, making it perfect for crimp testing and force testing where rapid sample loading is desirable. A horizontal setup creates unlimited clearance, and can also be ideal for testing very large objects. For applications requiring distance measurement, the Imada NLH-220-S is equipped with a digital distance meter to measure displacement. The digital distance meter has PC output capabilities, for more information click here. The stand will accommodate any of the standard range Imada force gauges. The large working platform has a 7 x 3 array of M8 holes to accommodate a variety of holding fixtures. AP-002 Adapter Plate is available to mount most other brand force gauges to the NLH test stand. Features Force Gauge and Distance Sensor are Sold Separately Tension and compression testing Horizontal positioning is easy to control Lever action allows for rapid testing Large work area accommodates a wide variety of samples Specifications Capacity 220 lbs / 100 Kg Stroke 2" / 50mm Optional Distance Meter Specifications Resolution 0.0005" / 0.01 mm Accuracy 0.1% of reading or 0.005"/0.1 mm whichever is greater Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/mechanical-force-gauges-c-101_30/imada-nlh-horizontal-lever-test-stand-p-1930.html Sun, 05 Feb 2023 12:45:43 +0000 USD 1930 Imada 999 NLH https://www.abqindustrial.net/store/images/nlh-horizontal-lever-test-stand.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/electronic-stethoscope-c-102_81/compact-ste4-electronic-stethoscope-p-1929.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1929 ]]>Compact STE4 Electronic Stethoscope Electronic Stethoscope Two probes - 70mm & 300mm Includes Peltor Headphones The Compact STE4 Electronic Stethoscope is designed to help locate the source of excess bearing and machine noise easily at low cost. It is an ideal easy to use listening device for mechanical generated noise in all types of applications. The 3.5mm jack socket tape output can also be fed into an audio tape recorder to store the data for either further analysis or as a reference for future comparison. Kit Contents STE4 Electronic Stethoscope Peltor headset 70mm probe 300mm probe Batteries Carrying Case Features Piezo Transducer Peltor headset Two probes - 70mm & 300mm Digital volume control - 32 steps 4x AAA batteries for 30 hrs continuous use (typical) Jack socket output for recording Specifications Frequency Range 30Hz - 15KHz Ambient Temp -10 to +45°C Output Volume Digitally adjustable in 32 steps Battery 4 x AAA Alkaline cells Battery life Approx. 30 Hours Dimensions 300 x 40 x 40mm Probes 1 x 300mm 1 x 70mm Headphones 8 Ohm Probes 300mm and 70mm Applications An ideal easy-to-use listening device for mechanically generated noise in all types of applications. Maintenance Tool: The new STE3 is ideal for checking abnormal operational machinery noise levels when setting up routine maintenance plans. Recording Data: The jack socket output is designed to be fed into an Audio Tape Recorder to store data for further analysis. Contact Probes: Two lengths of contact probe are supplied, 70mm for normal use and 300mm to give access to more difficult locations. Headset: A high quality Peltor headset is included, designed to minimise background sounds in high noise environments. Downloads STE4 Electronic Stethoscope - Instruction Manual STE4 Electronic Stethoscope - Certificate of Calibration Example Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/electronic-stethoscope-c-102_81/compact-ste4-electronic-stethoscope-p-1929.html Tue, 09 Nov 2021 23:22:57 +0000 USD 1929 Compact 999 STE4 https://www.abqindustrial.net/store/images/ste4-electronic-stethoscope.jpg Electronic Stethoscope

---

Two probes - 70mm & 300mm

---

Includes Peltor Headphones

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/hans-schmidt-ear-300-area-weight-balance-p-1928.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1928 ]]>Hans-Schmidt EAR-300 Area Weight Balance Range: 30000 g/m² or 300 g Range: 30000 g/m² or 300 g The Hans-Schmidt EAR-300 Area Weight Balance is ideal to determine the gsm substance or determinate weight in grams of textilies as woven fabrics, fabrics, fleece, paper etc. 2 Measuring modes: g/m² for fabric, paper or similar materials g to determine weight Kit Contents EAR-300 Area Weight Balance Calibration weight 200 g AC Adapter 100 – 240 V AC Operating Instructions Features Automatic zero tracking and tare function Powered by supplied AC adapter or integrated rechargeable battery Supplied with calibration weight for recalibration Built in calibration routine Specifications Capacity 30000 g/m² Area weight mode 300 g Weight mode Resolution 1 g Area weight mode (g/m²) 0.01 g Weight mode Sample Size 100 cm² Power Supply DC 9 V - 500 mA, accumulator (12 hr continuous use, recharge time 12 hr) AC Adapter 100 – 240 V AC Platform size Ø 120 mm Temperature range 50 - 113 °F (10 - 45 °C) Weight, net (gross) Approx. 1700 g (2700 g) Dimensions 211x 185x 59mm (LxWxH) Downloads EAR-300 Area Weight Balance - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/hans-schmidt-ear-300-area-weight-balance-p-1928.html Mon, 29 Nov 2021 17:35:59 +0000 USD 1928 Hans-Schmidt 1000 EAR-300 https://www.abqindustrial.net/store/images/ear-300-area-weight-balance.jpg Area Weight Balance

---

Range: 30000 g/m² or 300 g

---

]]> https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/hans-schmidt-ys-105-yarn-speed-and-length-meter-p-1927.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1927 ]]>Hans-Schmidt YS-105 Yarn Speed and Length Meter Includes Traceable Calibration Certificate 2-Year Warranty The Hans-Schmidt YS-105 Yarn Speed and Length Meter combines the functions of two separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, and other filaments using a unique "wrapper" roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YS-105 can also be used as a contact tachometer to measure linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc. Kit Contents Universal 6" circumference wheel (surface speed) 6" circumference grooved wheel (yarn speed) Cone tip Funnel tip 3" extension Two AA batteries Operating instructions Carrying Case Features Includes Traceable Calibration Certificate LCD Display Slide-on measuring heads make it simple to rapidly convert from one function to another 16 adjustable measuring units: rpm, rev, m/min, m/h, ft/min, ft/h, yd/min, yd/h, in/min, in/h, mil/h, cm, m, in, ft, yd Measuring range (yarn and wire): speed 0.1 – 5000 m/min length 0.1 – 9999 m Max. material diameter: wire 0.3 mm yarn 1.5 mm Built-in memory Max., Min and last four readings 2-Year Warranty Specifications Certificate of Compliance 2.1 according EN 10204 Measuring range (floating decimal point) Revolution: 0.1 – 25000 rpm; 6 – 9999.9 rph Speed: z. B. 0.02 – 3810 m/min; 0.9 – 99999 m/h; 0.6 – 99999 in/min; 0.05 – 12500 ft/min; 3 – 99999 ft/h; 0.02 – 4167 yd/min; 1.0 – 9999 yd/h; 0.0006 – 142.5 mil/h Length: 0.5 – 99999 cm; 0.005 – 99999 m; 0.1 – 9999.9 in; 0.01 – 99999 ft; 0.005 – 9999.9 yd Accuracy Revolution: 0 – 999.9 rpm (±0.1 rpm) ±1 digit 1000 – 9999.9 rpm (±1 rpm) ±1 digit 10000 – 25000 rpm (±0.01% of reading) ±1 digit Speed and length: ±0.4 % of reading, ±1 digit Measuring units evolution: rpm, rph; Total revolutions (counter): rev Speed: m/min; m/h; ft/min; ft/h; yd/min;yd/h; in/min; in/h; mil/h Length: cm; m; in; ft; yd Memory MIN + MAX + last 4 values Resolution Length: 0.00254 m/impulse (with 6 inch measuring wheel) Revolution: 60 impulse/revolution Display 5 digit, LCD 12 mm Display update 1 s Over range indicator Display is flashing Auto power off After 5 min of non-use Power supply 2 x 1.5 V Type AA; approx. 65 h continuous use Low battery indicator “LO BAT” flashes at the display Housing material Die-cast aluminium Dimensions Approx. 183 x 80 x 46 mm (LxWxH) Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/hans-schmidt-ys-105-yarn-speed-and-length-meter-p-1927.html Thu, 18 Nov 2021 19:59:43 +0000 USD 1927 Hans-Schmidt 997 YS-105 https://www.abqindustrial.net/store/images/ys-105-yarn-speed-and-length-meter.jpg Yarn SPEED & LENGTH meter

---

Includes Traceable Calibration Certificate

---

2-Year Warranty

---

]]> https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-104-4000-dual-element-transducer-p-1926.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1926 ]]>1/2" diameter, 10.00 MHz dual element transducer typically used to measure cast aluminum parts. 1/2" diameter, 10.00 MHz dual element transducer typically used to measure cast aluminum parts. Potted cable, side in Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-104-4000-dual-element-transducer-p-1926.html Thu, 15 Dec 2022 01:54:27 +0000 USD 1926 Dakota Ultrasonics 999 T-104-4000 https://www.abqindustrial.net/store/images/t-104-4000-dual-element-transducer.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-101-2900-coating-probe-p-1925.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1925 ]]>3/16" - 5 MHz Coating Probe 3/16" diameter, 5 MHz Coating Probe for use with TI-CMX, TI-CMXDL and TI-CMXDLP Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-101-2900-coating-probe-p-1925.html Thu, 15 Dec 2022 01:40:39 +0000 USD 1925 Dakota Ultrasonics 1000 T-101-2900 https://www.abqindustrial.net/store/images/t-101-dual-element-transducer.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-104-2120-transducer-p-1924.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1924 ]]>1/2" diameter, 5 MHz dual element transducer with 2" Radius for Measuring Cylinder Wall Thickness 1/2" diameter, 5 MHz dual element transducer with 2" Radius for Measuring Cylinder Wall Thickness. Designed for engine builders. Also works on flat surfaces. Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/wall-thickness-gauge-accessories-c-100_38/dakota-ultrasonics-t-104-2120-transducer-p-1924.html Thu, 15 Dec 2022 01:52:15 +0000 USD 1924 Dakota Ultrasonics 1000 T-104-2120 https://www.abqindustrial.net/store/images/dakota-ultrasonics-t-104-2120-transducer.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/erichsen-paint-borer-518-mc-coating-thickness-gauge-p-1923.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1923 ]]>Erichsen Paint Borer 518 MC Coating Thickness Gauge Utilizes the wedge cut method in which the specimen is cut at a defined angle Measuring ranges up to 2000 micron / 78 mils Measuring Range: 300 µm / 11.8 mils with included #5 Drill Up to 2000 µm / 78 mils with optional drills The measuring microscope displays a system of concentric circles and from the difference in the radii the film thickness can be calculated by multiplying with a known factor. The Erichsen Paint Borer 518 MC Coating Thickness Gauge utilizes the wedge cut method in which the specimen is cut at a defined angle. From the projected width of the cut face the layer thickness can be calculated using a simple geometrical relationship. The Model 518 MC limits damage to the coating to a small conical hole as illustrated in the sectional view. The measuring microscope displays a system of concentric circles and from the difference in the radii the film thickness can be calculated by multiplying with a known factor. The Erichsen Paint Borer 518 MC Coating Thickness Gauge is a compact instrument having all the principal components; drilling device, measuring microscope, specimen illumination and the battery enclosed in a sturdy housing. A slide moving on horizontal slide-ways houses the drill and microscope and gives the PAINT BORER 518 MC the unique advantage of not having to be moved for measurement after drilling. The drill is spring mounted in the slide so that it can be pressed down onto the specimen with minimum force, the drill is switched on automatically when this is done. The carbide drill bits are easy to exchange and supplied with different accurately maintained cutting angles for 3 standard measuring ranges. The measuring microscope with a magnification factor of 50 has a measuring scale with 100 lines so that a resolution of 1% is obtained irrespective of the measuring range. The light button on the back of the PAINT BORER can be set for continuous light with three levels of illumination or interrupted illumination to prolong battery life. A 9-volt rechargeable battery is employed; AC operation with the charging unit is possible. Due to the mobility of the microscope in two axes (turned by 90° from one another) and the possibility of turning the scale, the PAINT BORER 518 MC is especially suitable for the evaluation of elliptical holes that arise with curved/ tilted specimens. Kit Contents The Paint Borer 518 MC is sold as a kit including: Drill no. 5 2 felt tip pens (black/silver) Screw Driver Rechargeable Battery (9 V) Power Pack (100 - 240) VAC, (47 - 63) Hz Plastic Case Operating Instructions Features For testing according to DIN 50 986, ISO 2808, ASTM D 4138, ASTM D 5796 Measures thickness of coatings on any substrate Measurement of individual layers of a multi-layer coating system Specifications Measuring accuracy 1% Minimum Sample Dimensions without specimen table: 150 x 25mmwith specimen table: 10 x 6 mm Dimensions 145 x 55 x 110 mm Weight approx. 850 g Drills for Models 518 MC and 548 Drill No. 2 1) No. 5 2) No. 4 1) No. 3 1) No. 1 1) Measuring range up to 200 µm up to 300 µm up to 500 µm up to1000 µm up to 2000 µm Scale factor (f) 2 µm/sc.div 3 µm/sc.div 5 µm/sc.div 10 µm/sc.div 20 µm/sc.div Cutting angle (α) 5,7° 8,5° 14,0° 26.7° 45° tan α 0.10 0.15 0.25 0.50 1.0 Geometry two-edges two-edges two-edges two-edges single-edges Head-Ø 5 mm 5 mm 5 mm 5 mm 5 mm Material carbide carbide carbide carbide carbide Operation The coating thickness measurement with PAINT BORER 518 MC is very simple: mark a spot with a felt tip pen and place the measuring instrument on the specimen. Move the drill into position over the test point and lower it to actuate the motor. Drill the coating through to the substrate. Move the microscope over the hole and switch the lamp on. Count the number of scale marks between the base material and the contrast mark and multiply this value by the scale factor which gives the measuring results. Special applications (individual layers of a multi-layer system, measurements on curved/tilted specimens) are dealt with in the operating instructions. Downloads Erichsen Paint Borer 518 MC- Data Sheet Erichsen Paint Borer 518 MC- Instruction Manual Erichsen Paint Borer 518 MCUSB - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/erichsen-paint-borer-518-mc-coating-thickness-gauge-p-1923.html Mon, 01 Apr 2024 23:14:01 +0000 USD 1923 Erichsen 998 PAINT BORER 518 MC https://www.abqindustrial.net/store/images/erichsen-paint-borer-518-mc.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-smartest-bluetooth-coating-thickness-sensor-p-1922.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1922 ]]>ElektroPhysik SmarTest Bluetooth Coating Thickness Sensor Intelligent Bluetooth Sensor for Coating Thickness Measurement Precision coating thickness gauge with digital sensor Can be connected to any SIDSP sensor Transfer of measuring data via Bluetooth, range of approx. 10 m Battery charge lasts for more than 8 hours of operation ElektroPhysik SmarTest Bluetooth Coating Thickness Sensor is an intelligent wireless sensor for non-destructive coating thickness measurement and relays sensor data via Bluetooth to your tablet, smart phone or to the coating thickness gauge MiniTest 745. The radio sensor SmarTest has a diameter of 16 mm and a length of 125 mm and weights just 48 g. This means that you can carry the SmarTest with you anywhere. The standard scope of supply comes with the F 1.5 or FN 1.5 sensor, which has been specially optimised for measuring on thin auto body sheets and can be used for a sheet thickness downwards of 0.3 mm. You can connect any SIDSP sensor to SmarTest and cover a wide range of coating thickness measurement tasks. Comfortable Apps can now turn smart phones and tablets into effective evaluation and measuring devices. The new SmarTest concept consisting of an app and a wireless sensor offers the perfect solution for measuring coating thickness with the help of smart phones and tablets. The SmarTest version of SIDSP®-sensors to measure coating thickness combines exceptional precision in measuring and resistance to interference with the advantages of the modern wireless technology. The digitally generated readings on the sensor are relayed by Bluetooth to your smart phone or tablet. The SmarTest App functions as a device for evaluating and thus replaces a conventional coating thickness gauge. Kit Contents ElektroPhysik SmarTest Bluetooth Coating Thickness Sensor Calibration set with calibration foils and reference zero test plate(s) USB charger with micro-USB cable Operating manual Manufacturer‘s certificate Storage case Features Powerful and versatile gauge with new ergonomic design making it ideal for on-site testing User-friendly key-pad layout with menu driven operation Variable pre-set test voltages specific to material thickness High voltage probe with equipment-on and pore indicator (red LED) Light-weight and hand-held test electrodes provide convenient operation Test method conforms to DIN 55 670 Backlit display to indicate current test voltage, number of pores and material thickness Residual voltage indicator Alarm signal when exceeding pore limit setting (Limit) Power supply: AC operated or battery operated via integrated storage battery (C-cells) Electrical safety provisions according to VDE 0411, part 1: probe voltage and maximum discharge rate stay below the limit values as specified by the safety standard. Low-battery indicator More The App functions include a clear display of current measuring value, statistical evaluation, storage of measuring values in files, 2-point calibration, measuring unit metric/imperial switchover and export of the series of measurement in the CSV format. All the functionalities of a smart phone are available for data transfer. For instance, you have the ease of sending your measuring data to any receiver by email. The intelligent SmarTest sensor is made to fit any jacket pocket. In combination with smart phones or tablets this forms an ultra modern full-set for experts on site to measure coating thickness. Long battery life: the sensor equipped with the LiFePo battery can function for up to 8 hours in continuous operation. Readings exceeding the set limits are indicated on the sensors‘s green/red LED. SmarTest functions on old smart phone models as well as on the latest ones. The dual Bluetooth module ensures a long operating time in modern devices thanks to the Bluetooth low energy mode. SmarTest is a most flexible solution: It can also be supplied in other combinations with any of the SIDSP®-sensors of the MiniTest 700 series to cover a wide field of different applications. Operation: It is very simple to operate the SmarTest: Start the SmarTest app on the mobile device. Switch on the wireless sensor and the Bluetooth connection is established automatically. Take measurements. The SmarTest app helps you through all steps with context-sensitive help texts in 4 languages currently. Application Non-destructive coating thickness measurement of: Non-magnetic coatings like varnishes, enamels, chromium and zinc on ferromagnetic base materials (e.g. steel) Insulating coatings like varnishes and anodising aluminium on nonferrous metals (e.g. aluminium, austenitic stainless steel, brass) Measuring Modes: There are two measuring modes available: Single value mode: The measurement values are taken individually and displayed. This enables you to take coating thickness values of the object to be measured at multiple points and then to evaluate them statistically. Continuous mode: After placing the sensor the measuring values are taken continuously and displayed. This mode is suited for calculation of layer thickness distribution on a restricted surface and to locate the thin and thick sections. The measuring values calculated on continuous mode can be saved in the statistics by briefly pressing the power button. Control / Data Transfer Sensor control and data transfer of the measuring values is done via Bluetooth 4.0 / Bluetooth Smart (low energy). The sensor and mobile device can be placed about 10 m away from each other, even farther under good transmission conditions. App Functions The SmarTest app shows the current measuring values, the statistical evaluation and helps store control and calibration of the sensor. There is an option of the metric (μm, mm) and imperial (mils) formats for display and processing of measuring values. Storage and transfer / download of measuring values is done in the CSV format. Calibration: Three calibration modes are available: Manufacturers calibration point calibration on the uncoated object to be measured (zero point calibration) point calibration (zero point calibration + 1 layer/sheet) Specifications Measuring range SmarTest F 1.5 0-1.5 mm / 59 mils SmarTest FN 1.5 F-range: 0-1.5 mm / 59 mils / N-range: 0-1.3 mm / 51 mils Accuracy ± (1 µm + 0.75 % of reading) Repeatability ± (0.5 µm + 0.5 % of reading) Measuring principle SmarTest F 1.5 :Magnetic induction SmarTest FN 1.5: Magnetic induction / eddy current Signal processing Sensor-integrated digital 32-bit signal processing (SIDSP®) Low range resolution 0.05 µm Smallest curvature radius, convex 1.5 mm Smallest curvature radius, concave 7.5 mm Smallest measuring surface ø 5 mm Smallest substrate thickness with Magnetic induction / 0.3 mm (300 µm) Smallest substrate thickness with Eddy current / 0.04 mm (40 µm) Interfaces Bluetooth 4.0 / Bluetooth Smart, range up to 10 m / Mini-USB connector for charging and power supply, data interface Operating temperature range – 10 °C ... + 60 °C Storage temperature range – 20 °C ... + 70 °C Power supply LiFePO4 battery / operating time approx. 8 hrs continuous operation Dimensions / weight ø 16 x 125 mm / 60 g Norms and standards DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, ASTM B244, B499, D7091, E376 Operation system as of Android 4.1, iOS Measuring units Metric / Mils switchable Calibration modi Factory calibration, zero point and 2-point calibration Statistics Number of measuring values, minimum, maximum, mean value, standard deviation Storage of measured values Storage of measured values in the CSV file format Downloads ElektroPhysik SmarTest Bluetooth Coating Thickness Sensor - Data Sheet ElektroPhysik SmarTest Bluetooth Coating Thickness Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-smartest-bluetooth-coating-thickness-sensor-p-1922.html Fri, 15 Oct 2021 19:22:40 +0000 USD 1922 ElektroPhysik 1000 SmarTest https://www.abqindustrial.net/store/images/smartest-bluetooth-coating-thickness-sensor.jpg Intelligent Bluetooth Sensor for Coating Thickness Measurement

---

Precision coating thickness gauge with digital sensor

---

Can be connected to any SIDSP sensor

---

Transfer of measuring data via Bluetooth, range of approx. 10 m

---

Battery charge lasts for more than 8 hours of operation

---

]]> https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/high-voltage-holiday-detectors-c-97_181_183/elektrophysik-porotest-7-high-voltage-porosity-holiday-detector-p-1921.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1921 ]]>ElektroPhysik PoroTest-7 High Voltage Porosity Holiday Detector, designed for detecting flaws and pores (holidays) 3 high voltage probes for different coating thicknesses available (not included): P7: 0.03 mm – 1.7 mm / 1 mils – 67 mils P30: 0.52 mm – 9.49 mm / 20.5 mils – 373.6 mils P35: 1.4 mm – 11.3 mm / 55 mils – 444 mils Designed for detecting flaws and pores, the ElektroPhysik PoroTest-7 High Voltage Porosity Holiday Detector can be used for non-destructive porosity testing of all insulating coatings on conductive substrates such as steel, aluminium, etc. The test instrument consists of a high voltage probe with an integrated high voltage generator and a test electrode, which is simply connected to the probe. The test voltage control works automatically and is specific to the thickness of the material to be tested and vice versa. The control unit features a digital display and control pad. The control unit housing is fully portable and made of rugged ABS plastic with an integrated handle. The high voltage probe and control unit are connected via a rugged cable. To detect porosity, the appropriate test voltage specific to the material thickness is set on the control unit which applies, when activated, a spark discharge at the moment a material flaw is detected. In addition to the spark discharge, flaws are indicated by a visible and audible signal and counted. The test voltage is directly indicated on the digital display. Typical applications: Testing linings and coatings applied on ducts, pipes, hulls, oil and storage tanks, enamel, paint, rubber and bitumen linings, vessels and tanks, GFK and other plastic materials. Kit Contents PoroTest-7 High Voltage Porosity Holiday Detector Control unit with integrated storage battery Connecting cable probe-control unit Metal brush Grounding cable, 5 m (16 ft) length Power cable Shoulder belt Instruction Manual Carrying Case Features Powerful and versatile gauge with new ergonomic design making it ideal for on-site testing User-friendly key-pad layout with menu driven operation Variable pre-set test voltages specific to material thickness High voltage probe with equipment-on and pore indicator (red LED) Light-weight and hand-held test electrodes provide convenient operation Test method conforms to DIN 55 670 Backlit display to indicate current test voltage, number of pores and material thickness Residual voltage indicator Alarm signal when exceeding pore limit setting (Limit) Power supply: AC operated or battery operated via integrated storage battery (C-cells) Electrical safety provisions according to VDE 0411, part 1: probe voltage and maximum discharge rate stay below the limit values as specified by the safety standard. Low-battery indicator Specifications Voltage DC Display LC-Display, 3-digit Accuracy of voltage setting ± (0.1 kV + 3% of reading) Dimensions of high voltage probe 274 mm x 63 mm Dimension of control unit 225 mm x 150 mm x 85 mm Weight high voltage probe 550 g Weight control unit 1400 g Alarm signal 90 dB, 0.1 s/Pore, continuous tone in case of short-circuit Signal output potential free, Umax.: 100 V, Imax.: 0.4 A Storage battery 4 C-cells, IEC LR 14, 3.5 Ah, NiMH, replaceable Storage battery life at maximum voltage PoroTest 7-P7: 20 hours continious operation PoroTest 7-P30 & P35: 10 hours continious operation Storage battery charging time 4 hrs quick charge Mains voltage 110 to 230 V, 50/60 Hz, automatic switch Operating temperature 0°...+50°C/ 32°...122°F Humidity avoid dew on the surface (refer to DIN 55 670) Standards DIN 55 670, ASTM D 5162-01, AS 3894.1-2002 Downloads ElektroPhysik PoroTest-7 High Voltage Porosity Holiday Detector - Data Sheet ElektroPhysik PoroTest-7 High Voltage Porosity Holiday Detector - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/high-voltage-holiday-detectors-c-97_181_183/elektrophysik-porotest-7-high-voltage-porosity-holiday-detector-p-1921.html Mon, 03 Jul 2023 17:52:37 +0000 USD 1921 ElektroPhysik 1000 PoroTest-7 https://www.abqindustrial.net/store/images/porotest-7-high-voltage-porosity-holiday-detector.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-mikrotest-standards-coated-metal-plates-for-calibration-of-mikrotest-coating-thickness-p-1920.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1920 ]]>ElektroPhysik MikroTest-Standards Coated Metal Plates for Calibration of MikroTest Coating Thickness Electropating Thickness Gauge utilizing the coulometric principle, a de-plating method conforming to DIN 50 955 and ISO 2177 Verify or calibrate your Mikrotest Coating Thickness Gauge and other ferrous coating thickness gauge using these precision standards. All sets are supplied with 4 coated plates marked with mil and micron/mm values. The plates are attached to a rigid plastic plate with printed tolerances and serial number. Features Calibration Certificate is OPTIONAL Each set is serialized Supplied in padded pouch Specifications Part Number Gauge Model Plate 1 Plate 2 Plate 3 Plate 4 82-051-0054 G | GM 0 10 µm | 0.40 mils 20 µm | 0.80 mils 40 µm | 1.60 mils 82-051-0055 F | FM 0 40 µm | 1.60 mils 120 µm | 4.7 mils 400µ | 16 mils 82-051-0056 S3 | S3M 220 µm | 8.60 mils 320 µm | 12.60 mils 1000 µm | 40 mils 2000 µm | 80 mils 82-051-0057 S5 | S5M 1000 µm | 40 mils 2000 µm | 80 mils 3000 µm | 120 mils 4000 µm | 160 mils 82-051-0058 S10 | S10M 3mm | 120 mils 4mm | 160 mils 5mm | 197 mils 8mm | 315 mils 82-051-0060 NiFe50 / NiFe50M 0 10 µm | 0.40 mils 20 µm | 0.80 mils 30 µm | 1.20 mils Downloads ElektroPhysik MikroTest-Standards Coated Metal Plates for Calibration of MikroTest Coating Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-mikrotest-standards-coated-metal-plates-for-calibration-of-mikrotest-coating-thickness-p-1920.html Mon, 01 Apr 2024 22:54:23 +0000 USD 1920 ElektroPhysik 998 MikroTest-Standards https://www.abqindustrial.net/store/images/mikrotest-standards-coated-metal-plates.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-galvanotest-coulometric-coating-thickness-gauge-p-1919.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1919 ]]>ElektroPhysik GalvanoTest Coulometric Coating Thickness Gauge Electropating Thickness Gauge utilizing the coulometric principle, a de-plating method conforming to DIN 50 955 and ISO 2177 The ElektroPhysik GalvanoTest Coulometric Coating Thickness Gauge is a device to measure coating thickness based on the Coulometric principle and be used for virtually all electroplated single or multi-layered coatings. The electroplated coatings like chromium, nickel, cadmium, copper, brass, silver, gold, tin, zinc can be measured on metals or non-metals. The ElektroPhysik GalvanoTest Coulometric Coating Thickness Gauge is available in two models: GalvanoTest 2000: the electrolyte is moved by a pulsator nozzle GalvanoTest 3000: large electrolyte volumes moved by a circulation pump enable quick serial measurements. Suited for use on very small parts and to measure gold layers. The anodic dissolution method, also known as Faraday's Coulometric method, works on the lines of the electroplating process: electric current passed through an electrolyte separates individual metal coatings from the substrate. By measuring the current and time the Galvano Test determines the thickness of the coating separated. Measuring range: 50 nm - 75 µm / 0.002 - 3 mils. Kit Contents GalvanoTest device Standard stand with measuring cell and pulsator nozzle (GalvanoTest 2000) Measuring stand with integrated circulation pump and measuring cell type 1 (GalvanoTest 3000) Connecting cable gauge / stand Ring gaskets and masks Electrolytes Pipettes Bottle for electrolyte waste Spray bottle Rubber pencil Absorbent paper Operating manual Features 8 de-plating speeds from 0.3 to 40 µm / min Measuring surface ranging between 0.25 and 8 mm² Measuring range between 50 nm and 75 µm / 0.002 - 3 mils An electrolyte beaker (accessory) to measure wires Variable shut-down speeds to measure alloy zones A wide range of special accessories for measurements on small components and wires Application: Destructive measurement of: Electroplated coatings like chromium, nickel, cadmium, copper, brass, silver, gold, tin, zinc on metallic or non-metallic substrates Specifications Coating/substrate combinations more than 70 coating/substrate combinations (standard version) coatings on flat and curved surfaces coatings on small components and wires 10 preset types of metal: Cr, Ni, Cu, brass, Zn, Ag, Sn, Pb, Cd, Au 8 further metal coatings for special applications measuring range: 0.05…75 μm Measuring cell with circulation pump Measuring surface gasket 4 mm2/6.2 x 10-3 inch2 mask 1 mm2/1.55 x 10-3 inch2 mask 0.25 mm2/0.388 x 10-3 inch2 (deplated area nearly invisible) electrolyte cup 0.25 mm2 to approx. 16 mm2/(0.388–24.8) x 10-3 inch2 (optional) Adjustable settings for optimum results maximum of 8 deplating speeds in the range of approx. 0.3–40 μm (0.012–1.57) mils/min directly adjustable calibration factors; individual setting according tometal type and measuring surface calibration setting with the aid of thickness standards variable shut-down speed to suppress interference or for measuring alloy zones between coating and substrate Data storage with GalvanoTest number of memories for various metals: 18 number of readings which can be stored and evaluated: 2000 non-volatile memory retains all calibration settings, readings and statistical values after the gauge has been switched off Statistical evaluation display of 6 statistical values – mean value, standard deviation, coefficient of variation,number of readings, highest and lowest single reading immediate or delayed display of statistical values immediate or delayed print-out of readings and statistics display and print-out of date and time – year, month, day, hour and minute GalvanoTest interfaces for peripheral devices interface for MiniPrint data printer interface for an RS 232 C for connection to a PC analog output for connection to an x-t recorder to chart voltage curve Measuring uncertainty 5 % of reading on a measuring area of 8 mm2 after calibration Power supply 110/220 V 50…60 Hz/10 Watt Dimensions and weight 260 mm x 250 mm x 100 mm/10.24 inch, 9.85 inch, 3.94 inch; approx. 2.5 kg (gauge) support with integrated pump approx. 3.0 kg Downloads ElektroPhysik GalvanoTest 2000/3000 Coulometric Coating Thickness Gauge - Instruction Manual ElektroPhysik GalvanoTest 2000 Coulometric Coating Thickness Gauge - Instruction Manual ElektroPhysik GalvanoTest 3000 Coulometric Coating Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-galvanotest-coulometric-coating-thickness-gauge-p-1919.html Thu, 04 Jul 2024 16:17:00 +0000 USD 1919 ElektroPhysik 1000 GalvanoTest https://www.abqindustrial.net/store/images/elektrophysik-galvanotest-coulometric-coating-thickness.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007x-precision-ultrasonic-wall-thickness-gauge-p-1918.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1918 ]]>Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge Precision Ultrasonic Wall Thickness Gauge for Thin Walls Resolution: .0001" (0.001 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducers up to 36.00" / 915.0 mm The Checkline TI-007X is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The TI-007X has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The TI-007X can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the TI-007X does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required. Kit Contents Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.0001 inch (0.001 mm) Large, backlit LCD display retains last reading Selectable units of inch or mm Selectable Backlight ON/OFF/AUTO Optional serial RS-232 or Bluetooth output IP 65 Rated for protection even in the toughest field conditions Operates on two (2) AA Batteries - 45 hours continuous operation Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity USB Data output of single values for transfer to data collection devices (no internal memory) Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) CE-Certified Warranty: Gauge: 5 Years Probes: 90 Days Made in the USA Specifications Total Measuring Range | (Steel) 0.006 - 36.000 inches | 0.15 - 924 mm | (depends on material and transducer/probe type) Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Output USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output Output Optional RS-232 and Bluetooth Operating Temperature -22 to 167F (-30 to 75C) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25" | (64 x 131 x 32 mm) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Protection IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge | The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge | The LOCK icon will turn off Warranty Gauge: 5 Years | Probes: 90 Days Delay Line Tips for TI-007X P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder TI-PVX Precision Ultrasonic A-scan Thickness Gauge Hardware AGC gain control for multiple echo and thru-paint measurement 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs Downloads Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Instruction Manual Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Add Couplant Notice Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007x-precision-ultrasonic-wall-thickness-gauge-p-1918.html Thu, 24 Feb 2022 20:24:43 +0000 USD 1918 Checkline 998 TI-007X https://www.abqindustrial.net/store/images/ti-007x-precision-ultrasonic-wall-thickness-gauge.jpg https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-bluelink-bluetooth-dynamometer-p-1917.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1917 ]]>Straightpoint Bluelink Bluetooth Dynamometer Capacity 6.5 tonnes / 14,300 lbs Wireless Range 328 ft / 100 m The Straightpoint Bluelink Bluetooth Dynamometer is designed to replace outdated mechanical models. With a 6.5 tonne / 14,300lb (6500kg) capacity, the BlueLink Dynamometer is the latest SP product to feature Bluetooth wireless technology. The long-range Bluetooth signal connects to any iOS or Android device that has our free HHP app installed, providing the operator with a wireless range of up to 328ft / 100m. This allows them to stand in a safe position away from the load, with no requirement to read directly from the dynamometer. The app will also allow the operator to log data versus time or on events such as over or underload. An adjustable alarm will alert the operator on their smartphone if any overload is occurring. Rigged using industry-standard shackles such as Crosby G2130, the BlueLink has been designed to minimize headroom (6.14” or 156mm from eye to eye). With a safety factor of over 500%, its compact lightweight design does not sacrifice on strength. Constructed from high-quality aerospace-grade aluminum, which is then hard-anodized, it features an advanced internal design structure. This design provides the product with an unrivaled strength to weight ratio. The use of a separate internal sealed enclosure administers the load cell's electronic components with IP67 or NEMA6 environmental protection, even with the battery cover plate missing. All these features make it an industry-leading compact dynamometer, even more suitable for use in the harshest industrial or leisure environments. The Straightpoint Bluelink Bluetooth Dynamometer is powered by four standard AA alkaline batteries that provide in excess of 500 hours transmission time. Its internal antennae ensures safe transmissions of loads to an accuracy of ±0.2% FS. Kit Contents Straightpoint Bluelink Bluetooth Dynamometer 4 x AA Batteries Calibration & proof test certificate Multi lingual user manual Carry / transit case RFID Tagged Features Bluetooth wireless connection to any iOS or Android device with SP HHP App Wireless Range of 328ft/100m Battery Life of 500hrs Environmentally Sealed to IP67/NEMA6 90db Audible alarm alert for high/low values Internal Antennae Remote On-Off from HHP App 100 Hz Peak Hold Push button Tare Fatigue Rated Small to medium crane lifts Millwrighting - machinists - mechanics Linesman - utilities Freight and cargo weighing Aircraft and marine vessel manufacturing/building Cable/rope tensioning Precision field testing of chain, rope, wire. Multiple applications within construction, transportation and logistics, and material handling 2 year warranty Design validated by F.E.A. Complies with ASME B30.26 Warranty 1-Year (FREE Extension to 2-Years with Product Registration) Specifications Capacity 6.5 tonnes / 14,300 lbs Resolution 0.001 tonnes / 2 lbs Accuracy ± 0.2% of full scale Weight 1.5 kg / 3.3 lbs Safety Factor 5:1 Power 4x AA Batteries Battery Life 500 Hours Operating Temperature -10°C to +50°C or 14°F to 122°F Wireless Range 328 feet / 100 m Data Rate 3 Hz Protection IP67 / NEMA6 Related Products Radiolink-Plus-ATEX ATEX / Ex IECEx Wireless Dynamometer Tension Loadcell ATEX Certified approved for use in hazardous zones 2, 1 and 0 LoadLink-Plus Digital Dynamometer Tension Loadcell SW-A01i Wireless Base Station with Analogue Output StraightPoint INSIGHT Software StraightPoint Crosby Shackles for RLP, CP, LLP and WLP Dynamometers Downloads Straightpoint Bluelink Bluetooth Dynamometer - Data Sheet Straightpoint Bluelink Bluetooth Dynamometer - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/dynamometers-tension-load-cells-c-41/straightpoint-bluelink-bluetooth-dynamometer-p-1917.html Wed, 01 Dec 2021 19:36:09 +0000 USD 1917 Straightpoint 996 BlueLink https://www.abqindustrial.net/store/images/bluelink-bluetooth-dynamometer.jpg Capacity 6.5 tonnes / 14,300 lbs

---

Wireless Range 328 ft / 100 m

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/cap-torque-testers-c-101_1/imada-cap-dtxs-cap-torque-testers-p-1916.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1916 ]]>Imada CAP-DTXS Cap Torque Testers 3 Ranges up to 85 lb-in Selectable real time and peak modes The Imada CAP-DTXS Cap Torque Testers is an easy-to-use, high-precision cap torque tester that features a large electroluminescent display that clearly indicates the real-time and peak torque. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights indicate a value less than low setpoint, green lights between high and low, and red for over the high. The Imada CAP-DTXS Cap Torque Testers is supplied with ZT Logger data acquisition software. It can download data from the tester memory or captures continuous data at 10 points/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second. All Imada CAP-DTXS Cap Torque Testers include a 3 Point Calibration Certificate traceable to NIST. The imdada DTXS cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1″ high standard pegs (optional long pegs and calibration kit available). Features Test cap loosening (CCW) and tightening (CW) torque Selectable real time and peak modes USB, RS-232, Digimatic and Analog outputs Selectable units of lbf-in, kgf-cm, N-m, ozf-in, N-cm 1000 data point memory capacity Programmable high/low setpoints with color-coded LED indicators and audible signal Overload and low battery indicators 200% overload capacity DTXS accommodates samples from 20 up to 160 mm (0.787" - 6.30") Four rubber-coated 1 inch pegs are included with DTXS Optional "Small Table" accommodates samples from 7 up to 50 mm (0.275" - 2") Optional Peg sizes/material available Include 3 Point Calibration Certificate traceable to NIST. ISO 17025 Calibration Certification optionally available 2 Year Warranty Specifications Accuracy ±0.5%F.S.±1digit Unit of measurement lbf-in, kgf-cm, N-m, ozf-in, N-cm Display 4-digit Display update 10 times/ sec Auto Zero Reset 1.0 to 60 seconds (selectable) Sampling rate 2,000 samples/second (max) thru the USB port Safe overload rating Approx. 200% Operating Environment Temperature: 0-40 °C Humidity: 20 -80%RH Output Outputs USB, RS-232C, Digimatic and ± 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm Overload warning Approx.110%F.S. (Warning message and alarm ) Sensitivity Max, High, Medium, Low (selectable) External connecting switch SEND (a point of contact holding), Zero reset, Peak, ON/OFF setting Auto Power Off 5, 10, minutes or OFF (selectable) Power Built-In Rechargeable Ni-MH battery pack or via AC-Adapter (100-240V AC) Battery Life approx. 8 hours (recharge time approx. 10 hours) Battery Indicator Indicates three charge states high, medium and low Plug Type USA Blade Type (Select Euro Plug Adapter for use in 230V Countries) Weight Approx. 10 Lbs/4.5kg (Including Standard table and Standard pins) Warranty 2-Years Torque Ranges Model CAP-DTXS-15 CAP-DTXS-40 CAP-DTXS-85 lbf-in 15.00 (0.01 lbf-in) 40.00 (0.01 lbf-in) 85.0 (0.1 lbf-in) kgf-cm 20.00 (0.01 kgf-cm) 50.00 (0.01 kgf-cm) 100.0 (0.1 kgf-cm) N-cm 200.0 (0.1 N-cm) 500.0 (0.1 N-cm) 1000 (1 N-cm) Nm 2.000 (0.001 Nm) 5.000 (0.001 Nm) 10.000 (0.01 Nm) ozf-in 240.0 (0.1 ozf-in) 640.0 (0.1 ozf-in) 1360 (1 ozf-in) Optional Small Table Clamps diameters from 7mm ~ 50mm DT-ST DT-ST-01 DT-ST-02 Small table with standard pegs Small table with steel pegs Small table with long pegs Related Products Mark-10 CAP-TT01 Cap Torque Tester With Data Output 6 Ranges up to 250 lb-in / 28 N-m Shimpo TNP Cap Torque Tester Selectable units of measure: lbf-in, kgf-cm, N-m and N-cm Imada SBK-492 Calibration Fixture for DTX2 Cap Torque Tester Designed to provide an economical way to measure and calibrate multiple torque tools Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/cap-torque-testers-c-101_1/imada-cap-dtxs-cap-torque-testers-p-1916.html Tue, 02 Apr 2024 18:36:46 +0000 USD 1916 Imada 995 CAP-DTXS https://www.abqindustrial.net/store/images/cedar-imada-dtxs-digital-cap-torque-tester.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/cedar-dwt-200-digital-torque-tester-for-manual-wrenches-p-1915.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1915 ]]>Cedar Digital Torque Tester for Manual Torque Wrenches Capacity 200 Nm The Cedar DWT-200 Digital Torque Tester for Manual Wrenches is ideal for checking torque on manual torque wrenches up to 200 Nm / 1,500 lbf-in with an accuracy of ± .5% F.S., ± 1 LSD. The tester features 3 measurement modes: Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m. DWT-200 torque tester automatically captures the peak down torque, when the torque wrench clicks (breakaway torque), even though the operator may apply additional torque. This allows an unskilled operator to achieve the same accurate results as a skilled operator. With a rugged heavy-duty metal construction, the DWT-200 is durable enough for a production environment. The DWT-200 has a 1/2″ square drive, includes a 3/8″ square drive adapter, and runs about 20 hours continuously on four AA batteries. The optional vise mounting plate allows you to test anywhere there is a vise. The tester is intended to measure torque in the clockwise direction only. The Cedar DWT-200 torque tester is sold as a kit. All kits include the torque tester, drive adapter, and carrying case. All new testers include a 3-point calibration certificate traceable to NIST. ISO-17025 certificates are available at an additional charge. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester). Features Proprietary peak down capture mode Heavy duty metal construction lbf-in, kgf-cm, N-m selectable Peak Down, Peak, and Real Time measuring modes (selectable) Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F) Clockwise operation 1/2″ square drive and 3/8″ square drive adapter Auto power off (after 10 minutes of non use) Runs on four AA batteries (about 20 hours continuous use) Optional vise mounting plate (AP-200V) Specifications Measuring Direction Clockwise ONLY Accuracy +/-0.5% F.S. ±1 LSD Power 4x AA Batteries provide 20 hours of use Torque Ranges Model Range Drive DWT-200 7.0 - 200.0 Nm 70 - 1740 lbf-in 70 - 2000 Kgf-cm 1/2" Square with 3/8" Drive Adpater Related Products AWS TT-QC / AWS-QC Digital Torque Tester Bench Mount Digital Torque Tester for manual and power torque screwdrivers and wrenches AWS TT-3000 / AWS-3000 Desktop Torque Tester For testing click, dial, and digital wrenches, plus most power tools including impulse and DC electric AWS MTM Multi-Channel Digital Torque Tester for Power Drivers & Wrenches Designed to provide an economical way to measure and calibrate multiple torque tools AWS-1000 Series Mechanical Torque Wrench Loader NIST Traceable Certificates of Conformance Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/cedar-dwt-200-digital-torque-tester-for-manual-wrenches-p-1915.html Wed, 24 Jul 2024 18:33:08 +0000 USD 1915 Cedar 1000 DWT-200 https://www.abqindustrial.net/store/images/dtw-200-digital-torque-tester-for-manual-torque-wrenches.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/rex-rx-dd-5-digital-durometer-with-adjustable-timer-p-1914.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1914 ]]>Rex RX-DD-5 Digital Durometer with Adjustable Timer Adjustable Measurement Timer with Onscreen Countdown Available Scales: A, D Store and View up to 200 Measurements Includes NIST Calibration Certificate Conforms to ASTM D-2240 Available Scales: A, D, B, C, DO, E, M, O, OO, OOO, ASKER C The Rex RX-DD-5 digital durometer is the latest innovation for performing timed hardness testing. The Rex RX-DD-5 is equipped with an adjustable timer and onscreen countdown that can be set to delay from 0-30 seconds. When enabled, the timer function will be automatically activated when the presser foot meets the test specimen. Up to 200 readings can be stored and viewed inside the durometer or downloaded through the USB port. Kit Contents Rex RX-DD-5 Digital Durometer with Adjustable Timer 115V AC Adapter Calibration certificate in a foam-fitted metal Instruction Manual Carrying case Features Conforms to ASTM D-2240 (ISO, DIN and JIS Conformance Also Available) Adjustable Measurement Timer with Onscreen Countdown Store and View up to 200 Measurements High and low buttons for setting tolerance limits Holds reading until reset Dial rotates up to 270° Extra-Large Number Display Download and Collect Data Using USB Smart Cable (Sold Separately) Custom Made Carrying Case Includes NIST Calibration Certificate One Year Warranty Specifications Measruing Range 0 - 100 Units Resolution 0.1 Units Accuracy* ±1 durometer unit (A,B,C,D,E,O,DO) | ±2 durometer units (OO,OOO) | ±4 durometer units (M) Tolerance ± 0.5 at "100" and -0 +1 at "0" Power Supply (2) 3V CR-2450 Batteries 115V AC Adapter Included. 230V AC Adapter Optional Mounting Thread 5/16-40 Dimensions 2.25" x 6.125" Weight 7.15 oz (202.69 grams) Warranty 1 year RS232 Output 9600 baud, no parity, 8 data bits, 1 stop bit (requires external power) * Note: per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted. Portable Battery-Powered Printer for Hardcopy Documentation Need a hard copy printout of your measurement results? Our P-190 Printer with the G03-0086 Cable will allow you to print each reading as it's shown on the display. The user simply depresses the thumb switch each time they want a value transferred to the printer. Simple yet effective! The battery-powered P-190 Printer uses standard rolls of adding machine paper, unlike thermal printers the printout will not fade over time. It is supplied with a battery charger for operation on all power worldwide. Order the following items as shown in the accessories section of the BUY NOW section at the bottom of this page. P-190 Printer G03-0086 Data Transfer Cable and Thumb Switch Related Products Rex OS-1 Durometer Test Stand Durometer Operating Stand for use with type A, B, C, D, DO, E, O, OO, and OOO Rex OS-2 Durometer Test Stand Type A, B, E and O scale durometers Rex DD-4 Precision Digital Shore Durometer RX-DD Available Scales: A, AO, B, C, D, DO, E, M, O, OO, OOO (Asker, ISO, DIN & JIS Scales also available, inquire) Rex Durometer Test Block Kits NIST Traceable Certificates of Conformance Downloads Rex RX-DD-5 Digital Durometer with Adjustable Timer - Data Sheet Rex RX-DD-5 Digital Durometer with Adjustable Timer - Instruction Manual Rex RX-DD-5 Digital Durometer with Adjustable Timer - Instruction Manual Supplement Rex RX-DD-5 Digital Durometer with Adjustable Timer - Drivers Instruction Manual Rex RX-DD-5 Digital Durometer with Adjustable Timer - USB Drivers 32 Bit Rex RX-DD-5 Digital Durometer with Adjustable Timer - USB Drivers 64 Bit Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/durometers-c-105_5/rex-rx-dd-5-digital-durometer-with-adjustable-timer-p-1914.html Wed, 29 Dec 2021 18:44:24 +0000 USD 1914 Rex 999 RX-DD-5 https://www.abqindustrial.net/store/images/rx-dd-5-digital-durometer-with-adjustable-timer.jpg Adjustable Measurement Timer with Onscreen Countdown

---

Available Scales: A, D

---

Store and View up to 200 Measurements

---

Includes NIST Calibration Certificate

---

Conforms to ASTM D-2240

---

]]> https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-440-ultrasonic-wall-thickness-gauge-p-1913.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1913 ]]>ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge Thru-Paint Mode (E-E) eliminates the Coating & only measures Wall Thickness Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Several Transducers are optionally available including one for High Temperature materials (350 °C) Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness The ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge is a sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate. NIST Traceable Calibration Certificate optionally available at additional cost Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Automatic Probe Zero function Uses Pulse-Echo (P-E) or Echo-Echo (E-E, thru-Paint) Principles of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring range Echo-Echo: 3 - 25 mm (0.12 - 0.98") Pulse Echo: With standard transducer U5.0E: 0.8 - 300 mm (0.03 - 11.8")(For ranges of other transducers see table) Resolution 0.01mm (0 – 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/secpreset sound velocity of 9 materials Measuring mode Pulse-Echo: Standard: normal operation | Minimum: detection of thinnest point | Difference: deviation of reading to preset value | Alarm Echo-Echo: Measurements through the coating Scan: High speed scan for high temperature surfaces Probe Standard transducer U5.0E: 8mm (0.31")(For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Cable Software and data transmission cable Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" | (130 X 73 X 24 mm) Accessories Included U5.0E 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), cable Data storage 10 groups with max. 500 values each Data interface USB Calibration automatic Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0E 8 mm 5.0 MHz 3 – 25 mm / 0.12 - 0.98 " (E-E) | 0.8 -300 mm / 0.031 - 11.8" (I-E) U5.0 8 mm | 0.31" 5.0 MHz 0.8 – 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 – 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 – 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 – 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0E -12-+60 °C measurements through the coating (E-E mode), standard transducer w ith I-E mode U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-440-ultrasonic-wall-thickness-gauge-p-1913.html Thu, 24 Feb 2022 20:22:40 +0000 USD 1913 ElektroPhysik 1000 440 https://www.abqindustrial.net/store/images/minitest-440-ultrasonic-wall-thickness-gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-430-ultrasonic-wall-thickness-gauge-p-1912.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1912 ]]>Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Automatic identification of probes with Auto Probe Zero Several Transducers are optionally available including one for High Temperature materials (350 °C) Includes built-in datalogger with USB output Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate NIST Traceable Calibration Certificate optionally available at additional cost Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Automatic Probe Zero function Uses Pulse-Echo Principle of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring range Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8") (For ranges of other transducers see table) Resolution 0.01mm (0 – 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec preset sound velocity of 9 materials Measuring mode Pulse-Echo Standard: normal operation | Minimum : detection of thinnest point | Difference: deviation of reading to preset value| Alarm Scan High speed scan for high temperature surfaces Probe Standard transducer U5.0: 8mm (0.31") (For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Cable Software and data transmission cable Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" (130 X 73 X 24 mm) Accessories Included U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), cable Data storage 10 groups with max. 500 values each Data interface USB Calibration automatic Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0 8 mm | 0.31" 5.0 MHz 0.8 – 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 – 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 – 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 – 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-430-ultrasonic-wall-thickness-gauge-p-1912.html Thu, 24 Feb 2022 20:22:41 +0000 USD 1912 ElektroPhysik 997 430 https://www.abqindustrial.net/store/images/minitest-430-ultrasonic-wall-thickness-gauge.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/roof-moisture-inspection-kits-c-107_127_129/tramex-rmk-roof-master-kit-p-1911.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1911 ]]>Tramex RIK Roofing Inspector Kit Non-destructive checking of moisture conditions in roofing The Tramex RMK Roof Master Kit is a complete kit for the Roofing Professional, including the Dec Scanner and the Tramex RWS Roof Moisture Meter and Wet Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches (152mm) in depth. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 Concrete Moisture Encounter X5 and probes. An infrared surface thermometer gives surface temperature. This kit comes in a protective heavy-duty wheeled carry case with die-cut foam lining. The Roof Master Kit is used to perform ASTM D7954. Kit Contents Tramex DSAL Dec Scanner Moisture Scanner for Roofing Tramex CMEX5 Concrete Moisture Encounter X5 Tramex RWS Roof Moisture Meter and Wet Wall Scanner Tramex IRT2 Infrared Surface Thermometer Tramex Free App available for Android and iOS (phone not included) Tramex RHP-NW Narrow Wand Relative Humidity Probe Tramex HH14SP200 Heavy-Duty Electrode with Cable and 7" Long Pins Tramex HPW Hole Punch Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 TramexCarring Case Specifications Kit: Size 41.2" x 21.1" x 12" (1045mm x 535mm x 305mm) Weight 59.5lbs (27kg) Power 4 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE Batteries  (included) Tramex DSAL Dec Scanner Moisture Scanner for Roofing Size 30”W x 15¾“D x 6¼”H (762 mm x 400 mm x 158 mm) Scanning area 24”W x 15.5”D (609 mm x 394mm) Carry case 38”W x 20”D x 12”H (940mm x 508 mm x 305mm) Weight Dec Scanner 24.6 lbs (9.95 Kg) Weight Carry Case 21.9 lbs (9.9 Kg) Total Weight Dec Scanner in Carry Case 46.5 lbs (21.1 Kg) Outer packaging carton weight 4.4 lbs (2 Kg) Total shipping weight 51 lbs (23.1Kg) Dimensional shipping weight 66 lbs (30 Kg) Display Analog Measuring Range: 0 to 100 Comparative Max. depth of penetration 6” (152 mm) Power Supply 2 x 9 Volt PP3 Batteries (included) Limitations Some EPDM, Butyl rubber roofing and other conductive roofing Tramex RWS Roof Moisture Meter and Wet Wall Scanner Construction ABS Body Power: 9 volt PP3 Battery Included Display Analog Depth of penetration: 4" (100mm) Sensitivity Four Ranges Roofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity Limitations Some EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex IRT2 Infrared Surface Thermometer Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/roof-moisture-inspection-kits-c-107_127_129/tramex-rmk-roof-master-kit-p-1911.html Mon, 21 Nov 2022 10:54:27 +0000 USD 1911 Tramex 994 RMK https://www.abqindustrial.net/store/images/tramex-rmk-roof-master-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/roof-moisture-inspection-kits-c-107_127_129/tramex-rik-roofing-inspector-kit-p-1910.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1910 ]]>Tramex RIK Roofing Inspector Kit Non-destructive checking of moisture conditions in roofing The Tramex RIK Roofing Inspector Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth with the Tramex RWS Roof Moisture Meter and Wet Wall Scanner. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 Concrete Moisture Encounter X5 and probes. An infrared surface thermometer gives surface temperature. The Roofing Inspector Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex RWS Roof Moisture Meter and Wet Wall Scanner Tramex IRT2 Infrared Surface Thermometer Tramex Free App available for Android and iOS (phone not included) Tramex RHP-NW Narrow Wand Relative Humidity Probe Tramex HH14SP200 Heavy-Duty Electrode with Cable and 7" Long Pins Tramex HPW Hole Punch Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Kit: Size 19.2" x 14.9" x 5.7" (487mm x 380mm x 145mm) Weight 9.9 lbs (4.51kg) Power 2 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE (Included) Tramex RWS Roof Moisture Meter and Wet Wall Scanner Construction ABS Body Power: 9 volt PP3 Battery Included Display Analog Depth of penetration: 4" (100mm) Sensitivity Four Ranges Roofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity Limitations Some EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex IRT2 Infrared Surface Thermometer Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/roof-moisture-inspection-kits-c-107_127_129/tramex-rik-roofing-inspector-kit-p-1910.html Mon, 21 Nov 2022 10:54:25 +0000 USD 1910 Tramex 998 RIK https://www.abqindustrial.net/store/images/tramex-rik-roof-inspector-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-ccik-concrete-coatings-inspector-kit-p-1909.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1909 ]]>Tramex CCIK Concrete Coatings Inspector Kit Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration The Tramex CCIK Concrete Coatings Inspector Kit is a compact kit for instant and precise moisture testing of concrete floors and slabs. The Tramex CMEX5 Concrete Moisture Encounter X5 allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. Non-destructive testing of the top ¾" of the slab is most critical when applying coatings. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Concrete Coatings Inspector Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex IRT2 Infrared Surface Thermometer Tramex Free App available for Android and iOS (phone not included) Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Kit: Size 17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm) Weight 6.8 lbs (3.1kg) Power 2 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex IRT2 Infrared Surface Thermometer Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-ccik-concrete-coatings-inspector-kit-p-1909.html Fri, 18 Nov 2022 03:29:28 +0000 USD 1909 Tramex 999 CCIK https://www.abqindustrial.net/store/images/tramex-ccik-concrete-coatings-inspector-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cctk-concrete-coatings-tech-kit-p-1908.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1908 ]]>Tramex CCTK Concrete Coatings Tech Kit Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration The Tramex CCTK Concrete Coatings Tech Kit is a compact kit for instant and precise moisture testing of concrete floors and slabs and ambient conditions. The Tramex CMEX5 Concrete Moisture Encounter X5 meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Tramex DL-RHTA Feedback DataLogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Contact Temperature Probe provides temperature readings of the floor surface. The Concrete Coatings Tech Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex DL-RHTA Feedback DataLogger Tramex Free App available for Android and iOS (phone not included) Tramex CTP Contact Temperature Probe Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex ALLBAG Carring Case Specifications Kit: Size 13.2" x 9.5" x 3.2" (33.5cm x 24cm x 8cm) Weight 2.8 lbs (1.3kg) Power 3 x AA batteries Tramex CMEX5 Concrete Moisture Encounter X5 Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex DL-RHTA Feedback DataLogger Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Tramex CTP Contact Temperature Probe Units ºC (ºF) Temperature Range -30ºC to +80ºC (-20ºF to +175ºF) Accuracy ±0.5ºC from -10ºC to +85ºC (±0.9ºF from 14ºF to 185ºF) Resolution 0.1% over the complete range Related Products Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Tramex IRT2 Infrared Surface Thermometer his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance. Downloads Tramex CCTK Concrete Coatings Tech Kit - Data Sheet Tramex CME5 Concrete Moisture Encounter - Quick Guide Tramex CME5 Concrete Moisture Encounter - Instruction Manual Tramex CME5 Concrete Moisture Encounter - Data Sheet Tramex DL-RHTA Feedback DataLogger - Data Sheet Tramex DL-RHTA Feedback DataLogger - Quick Start Guide Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/concrete-moisture-inspection-kits-c-107_127_131/tramex-cctk-concrete-coatings-tech-kit-p-1908.html Mon, 21 Nov 2022 10:45:00 +0000 USD 1908 Tramex 997 CCTK https://www.abqindustrial.net/store/images/tramex-cctk-concrete-coatings-tech-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fmk-flooring-master-kit-p-1907.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1907 ]]>Tramex FMK Flooring Master Kit Industry:Flooring Inspection, Flooring Installation. The TrameX FMK Flooring Master Kit is the ultimate kit for pre & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Featuring the Tramex CMEX5 digital concrete moisture meter for non-destructive quantitative and comparative testing of concrete and ambient conditions. The Tramex CMEX5 Concrete Moisture Encounter X5 incorporates plug-in heavy-duty pin-probes measures Moisture Content in wood or WME in other building materials. The CMEX5 also incorporates plug-in RH probes for in-situ testing of concrete. These probes can be used with the Feedback Datalogger to give live readings and time logs of relative humidity, temperature and dew point in situ and in the environment. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter allows for moisture testing of wood and includes a shallow-depth feature to eliminate the effect of the substrate when needed. The Flooring Master Kit comes with an extension handle in a heavy duty Tramex travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter Tramex DL-RHTX Feedback DataLogger Tramex Free App available for Android and iOS (phone not included) Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins Tramex RHIE2 Hygro-i2 Relative Humidity Probe (3X) Tramex RHHL Hygro-i Hole Liners and Caps Tramex SAL75 Calibration Salt Check Tramex IRT2 Infrared Surface Thermometer Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex HA21SP52B Hammer-Action Pin-Type Electrode Tramex MAXMULTI Carring Case Specifications Size 20.5" x 18.9" x 5.9" (52cm x 48cm x 15cm) Weight 13.2 lbs (6kg) Power 5 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight  9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration Shallow signal: up to 0.40" (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 Tramex DL-RHTX Feedback DataLogger Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Tramex RHIE2 Hygro-i2 Relative Humidity Probe (3X) Range 0 to 100% RH Accuracy ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fmk-flooring-master-kit-p-1907.html Mon, 21 Nov 2022 10:44:40 +0000 USD 1907 Tramex 999 FMK https://www.abqindustrial.net/store/images/tramex-fmk-flooring-master-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fik-flooring-inspector-kit-p-1906.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1906 ]]>Tramex FIK Flooring Inspector Kit Industry:Flooring Inspection, Flooring Installation. The Tramex FIK Flooring Inspector Kit is the ultimate kit for pre & post-application moisture testing of concrete slabs, wood and various other floor covering materials. Featuring the Tramex Tramex CMEX5 Concrete Moisture Encounter X5 for non-destructive quantitative and comparative testing of concrete and ambient conditions. The Tramex Tramex CMEX5 Concrete Moisture Encounter X5 digital moisture meter allows for non-destructive quantitative testing of concrete using Gravimetric testing as a baseline and comparative testing per ASTM F2659. Plug-in reusable Tramex Tramex HIPP Hygro-i2 Relative Humidity Probe allow for performing ASTM F2170 for relative humidity readings in concrete slabs. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Tramex Flooring Inspector Kit comes with an extension handle in a heavy duty Tramex travel case. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex Free App available for Android and iOS (phone not included) Tramex HIPP Hygro-i2 Relative Humidity Probe Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins Tramex IRT2 Infrared Surface Thermometer Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Size 17.1" x 14.2" x 5.5" (43.5cm x 36cm x 14cm) Weight 8.6 lbs (3.9kg) Power 2 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5 Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex IRT2 Infrared Surface Thermometer Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-fik-flooring-inspector-kit-p-1906.html Mon, 21 Nov 2022 10:41:36 +0000 USD 1906 Tramex 997 FIK https://www.abqindustrial.net/store/images/tramex-fik-flooring-inspector-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-ftk-flooring-tech-kit-p-1905.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1905 ]]>Tramex FTK Flooring Tech Kit Industry:Flooring Inspection, Flooring Installation. A compact kit for instant and precise moisture testing of concrete floors and ambient conditions. The FTK Flooring Tech Kit is the ideal non destructive test kit for monitoring the most crucial information at the time of install. The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Ambient Tramex DL-RHTX Feedback DataLogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Contact Temperature Probe provides temperature readings of the floor surface. The Flooring Tech Kit comes with an extension handle in a Tramex Easy-travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Tramex DL-RHTX Feedback DataLogger Tramex Free App available for Android and iOS (phone not included) Tramex CTP Contact Temperature Probe Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex ALLBAG Carrying Case Specifications Size 13.2" x 9.5" x 3.2" (33.5cm x 24cm x 8cm) Weight 2.8 lbs (1.3kg) Power 3 x AA batteries Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex DL-RHTX Feedback DataLogger Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Tramex CTP Contact Temperature Probe Units ºC (ºF) Temperature Range -30ºC to +80ºC (-20ºF to +175ºF) Accuracy ±0.5ºC from -10ºC to +85ºC (±0.9ºF from 14ºF to 185ºF) Resolution 0.1% over the complete range Related Products Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately  3/4" into the slab Tramex DL-RHTX Feedback DataLogger Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging Tramex RHIE2 Electronic Interface Cable Electronic Interface Cable for Tramex Hygro-i Probes Fast Acclimation and Temperature response time Proven robustness, Durable and Reusable Tramex IRT2 Infrared Surface Thermometer his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance. Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Downloads Tramex FTK Flooring Tech Kit - Data Sheet Tramex CME5 Concrete Moisture Encounter - Quick Guide Tramex CME5 Concrete Moisture Encounter - Instruction Manual Tramex CME5 Concrete Moisture Encounter - Data Sheet Tramex DL-RHTX Feedback DataLogger - Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/flooring-moisture-inspection-kits-c-107_127_132/tramex-ftk-flooring-tech-kit-p-1905.html Mon, 21 Nov 2022 10:41:37 +0000 USD 1905 Tramex 1000 FTK https://www.abqindustrial.net/store/images/tramex-ftk-flooring-tech-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsmk5-1-building-survey-master-kit-p-1904.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1904 ]]>A complete kit featuring the RWS Roof & Wall Scanner for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems The Building Survey Master Kit features the multifunctional Tramex MRH3 digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing A complete kit featuring the Tramex RWS Roof Moisture Meter and Wet Wall Scanner for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems. The Building Survey Master Kit features the multifunctional Tramex MRH III Moisture and Humidity Meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The MRH III and reusable Ambient Relative Humidity Hygro-i2 Short Probe allow for testing relative humidity, temperature and dew point in the environment. When used in conjunction with the infrared surface thermome- ter, detrimental condensation conditions conducive to microbial growth can also be identified. The heavy-duty pin-probes measure moisture content in wood, and the insulated 7.8” pins allow for deep wall cavity probing. Concrete slab relative humidity testing to ASTM F2170 can also be performed with reusable relative humidity Hygro-i2 probes and hole liners(optional). Kit Contents Tramex MRH III Moisture and Humidity Meter Tramex RWS Roof Moisture Meter and Wet Wall Scanner Tramex RHP-SW Relative Humidity Probes Tramex Heavy-duty Pin-type Wood Probe Tramex HA21SP52 Hammer-Action Pin-Type Electrode Tramex SP52 Spare 1.5" Pins for Hammer Probe (pack of 10) Tramex HH14SP200 Spare 7" Pins for Pin Probe (pack of 2) Tramex IRT2 Infrared Surface Thermometer Tramex SAL75 Calibration Salt Check Tramex RHHLsR - Tramex HYGRO-i2® 16mm Hole Liners Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Kit: Size 19.2" x 14.9" x 5.7" (487mm x 380mm x 145mm) Weight 9.9lbs (4.51kg) Power 3 x 9 volt PP3 Batteries (included) Tramex RWS Roof Moisture Meter and Wet Wall Scanner Construction ABS Body Power: 9 volt PP3 Battery Included Display Analog Depth of penetration: 4" (100mm) Sensitivity Four Ranges Roofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity Limitations Some EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes Tramex MRH III Moisture and Humidity Meter Construction ABS Body Power 9 volt PP3 Battery  Included Display Digital / Backlit Depth of penetration: up to 1¼"(30mm)(In wood, drywall) Reference scale for building materials 0 to 100 Relative Humidity (with optional Hygro-i2 ® probe) 0 to 99% Wood Non-invasive Mode 5 to 55% MC (at SG of 0.3) Wood Invasive Mode (with optional wood pin probes) 7 to 40%MC Tramex IRT2 Infrared Surface Thermometer Temperature range -58°F ~ 1202°F (-50 to 650 °C)  Distance to Spot ratio D:S = 12:1 Display resolution 0.1 °F(0.1°C)   1000 Accuracy for targets Assumes ambient operating temperature of  73 to 77°F (23 to 25 °C) -58°F ~ 68°F (-50 ~ 20°C)  ±4.5°F (2.5°C) 68°F ~572°F (20°C ~300°C)  ±1.0% ± 1.8°F (1.0°C) 572°F ~ 1202°F (300°C ~650°C) ±1.5% Repeatability -58~68°F (-50~20°C)  :  ± 2.3°F (1.3°C) 68~1202°F (20~650°C) : ±0.5% or ±0.9°F (0.5°C) Response time 150ms Spectral response 8~14um Emissivity Digitally adjustable from 0.10 to 1.0 Over range indication LCD will show "----" Polarity: Automatic (no indication for positive polarity) Minus (-) sign for negative polarity Diode laser output Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsmk5-1-building-survey-master-kit-p-1904.html Thu, 25 Jan 2024 03:16:35 +0000 USD 1904 Tramex 999 BSMK5.1 https://www.abqindustrial.net/store/images/tramex-bsmk-building-survey-master-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdmk-water-damage-restoration-master-kit-p-1903.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1903 ]]>Tramex WDMK Water Damage Restoration Master Kit Industry: Water Damage Restoration The Tramex WDMK Water Damage Restoration Master Kit is ideal for moisture and relative humidity testing and monitoring of buildings and building materials. Featuring the Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX5 Concrete Moisture Encounter X5 for non-destructive quantitative and comparative testing of concrete and ambient conditions. The CMEX5 incorporates a plug-in heavy-duty pin-probe measures Moisture Content in wood or WME in other building materials. The CMEX5 also incorporates plug-in RH probes for in-situ testing of concrete, building materials, structures and air spaces. These probes can be used with the Feedback Datalogger to give live readings and time logs of relative humidity, temperature and dew point in the environment and in materials and air spaces. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. The Water Damage Restoration Master Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter Tramex DL-RHTX Feedback DataLogger Tramex Free App available for Android and iOS (phone not included) Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins Tramex HH14SP200B Heavy-Duty Electrode with 7"Long Pins Tramex RHP-NW Narrow Wand Relative Humidity Probe Tramex RHIE2 Hygro-i2 Relative Humidity Probe Tramex RHHL Hygro-i Hole Liners and Caps Tramex SAL75S Calibration Salt Check Tramex IRT2 Infrared Surface Thermometer Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Kit: Size 20.5” x 18.9” x 5.9” (52cm x 48cm x 15cm) Weight 10.8 lbs (4.9kg) Power 5 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5: Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight  9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration Shallow signal: up to 0.40" (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 Tramex DL-RHTX Feedback DataLogger: Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Tramex RHIE2 Hygro-I Electronic Interface Cable Range 0 to 100% RH Accuracy ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdmk-water-damage-restoration-master-kit-p-1903.html Mon, 21 Nov 2022 10:41:38 +0000 USD 1903 Tramex 996 WDMK https://www.abqindustrial.net/store/images/tramex-wdmk-water-damage-restoration-master-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdik-water-damage-restoration-inspector-kit-p-1902.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1902 ]]>Tramex WDIK Water Damage Restoration Inspector Kit Industry: Water Damage Restoration The Tramex WDIK Water Damage Restoration Inspector Kit is a complete kit for moisture and relative humidity testing and monitoring of buildings and building materials. Featuring the Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter for dual-depth, non-invasive testing of moisture conditions in drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX5 Concrete Moisture Encounter X5 allows for quantitative and comparative testing of concrete and ambient conditions. The Feedback Datalogger gives live readings and time logs relative humidity, temperature and dew point in the environment and in materials and air spaces with the plug-in relative humidity probe. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrometer. A heavy-duty pin-probe measures Moisture Content in wood or WME in other building materials. The Water Damage Restoration Inspector Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CMEX5 Concrete Moisture Encounter X5 Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter Tramex DL-RHTX Feedback DataLogger Tramex Free App available for Android and iOS (phone not included) Tramex HH14TP30B Heavy-duty Pin-type Wood Probe with Cable and Pins Tramex RHP-SNW Short Narrow Wand Relative Humidity Probe Tramex HH14SP200B Heavy-Duty Electrode with 7"Long Pins Tramex SAL75S Calibration Salt Check Tramex IRT2 Infrared Surface Thermometer Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex MAXMULTI Carring Case Specifications Kit: Size 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) Weight 8.6 lbs (3.9kg) Power 5 x AA batteries, 1 x 9 volt PP3 battery Tramex CMEX5 Concrete Moisture Encounter X5: Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99% (with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH ± 2% @ 25°C / 77°F Moisture content for wood 5→ 30 % (with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight  9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration Shallow signal: up to 0.40" (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 Tramex DL-RHTX Feedback DataLogger: Size 3.94" x 3.54" x 1.38" (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Tramex RHP-SNW Short Narrow Wand Relative Humidity Probe Range 0 → 100%RH Accuracy 0% → 99%RH ±2.0%RH (@ 77°F (25°C)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdik-water-damage-restoration-inspector-kit-p-1902.html Wed, 01 Nov 2023 21:34:26 +0000 USD 1902 Tramex 997 WDIK https://www.abqindustrial.net/store/images/tramex-wdik-water-damage-restoration-inspector-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdtk-water-damage-restoration-tech-kit-p-1901.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1901 ]]>Tramex WDTK Water Damage Restoration Tech Kit Industry:Water Damage Restoration The Tramex WDTK is a compact kit for non-destructive testing of moisture conditions in numerous building materials. The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter allows for instant and precise non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter allows for non-destructive quantitative testing of wood and comparative testing of drywall, plaster, brick, tiles, resilient flooring, laminates and roofing. The ME5 has a dual-depth feature to allow for the elimination of substrate influence on readings. The Water Damage Restoration Tech Kit comes with an extension handle in a Tramex Easy-travel case.The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places. Kit Contents Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5 Tramex Free App available for Android and iOS (phone not included) Tramex ALLBAGP Carring Case Specifications Kit: Size 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm) Weight 3.1 lbs (1.4kg) Power 4 x AA batteries Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter: Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight  9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration Shallow signal: up to 0.40” (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 Related Products Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately  3/4" into the slab Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings Tramex IRT2 Infrared Surface Thermometer his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance. Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex CALBOXME5 Moisture Encounter 5 Calibration Check Box Calibration Check Box for Moisture Encounter 5 - ME5 Tramex DL-RHTA Feedback DataLogger Bluetooth BLE enabled for use with mobile devices Precise Ambient Relative Humidity and Temperature logging Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Downloads Tramex WDTK Water Damage Restoration Tech Kit - Data Sheet Tramex CME5 Concrete Moisture Encounter - Quick Guide Tramex CME5 Concrete Moisture Encounter - Instruction Manual Tramex CME5 Concrete Moisture Encounter - Data Sheet Tramex ME5 Moisture Encounter - Quick Guide Tramex ME5 Moisture Encounter - Instruction Manual Tramex ME5 Moisture Encounter - Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/water-damage-restoration-kits-c-107_127_128/tramex-wdtk-water-damage-restoration-tech-kit-p-1901.html Wed, 01 Nov 2023 21:34:32 +0000 USD 1901 Tramex 999 WDTK https://www.abqindustrial.net/store/images/tramex-wdtk-water-damage-restoration-tech-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ctp-contact-temperature-probe-p-1900.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1900 ]]>Plug-in accessory probe used with the FeedBack DataLoggers Used alongside the Humidity sensor functions in the DataLogger Dew Point circumstances can be easily identified The Tramex CTP Contact Temperature Probe is a plug-in accessory probe used with the FeedBack DataLoggers to measure and log surface temperature over time. Used alongside the Humidity sensor functions in the DataLogger, dew point circumstances can be easily identified Specifications Units ºC (ºF) Temperature Range -30ºC to +80ºC (-20ºF to +175ºF) Accuracy ±0.5ºC from -10ºC to +85ºC (±0.9ºF from 14ºF to 185ºF) Resolution 0.1% over the complete range Related Products Tramex DL-RHTA Feedback DataLogger Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging Tramex DL-RHTA Feedback DataLogger Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging Tramex CCTK Concrete Coatings Tech Kit Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration Tramex FBSK5.1 Feedback Datalogger Starter Kit Bluetooth BLE enabled for use with mobile devices With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF Tramex FBZK5.1 Feedback Datalogger EZ Kit Ambient Relative Humidity, Temperature, Dew point, Grains per pound In Situ Relative Humidity, Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe) Downloads Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-ctp-contact-temperature-probe-p-1900.html Thu, 07 Dec 2023 23:45:40 +0000 USD 1900 Tramex 1000 CTP https://www.abqindustrial.net/store/images/tramex-ctp-contact-temperature-probe.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-dl-rhta-feedback-datalogger-p-1899.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1899 ]]>Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging The Tramex Feedback DataLogger and App have been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology. The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualise Live Readings, Thermal Conditions and Psychrometric Charts as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Feedback Data Logger App and a compatible iOS or Android mobile device. Kit Contents Tramex DL-RHTA Feedback DataLogger Wall Mounting and Tripod Stand Tramex Free App available for Android and iOS Features Bluetooth BLE enabled for use with mobile devices Up to 100,000 data point entries. Instant set up and start modes Precise Ambient Relative Humidity and Temperature logging Intuitive and instructive App interface Adjustable Interactive chart, spreadsheet, report and easy export functions Connectivity up to 165ft (50 meters) for highly accessible data downloads Supported measurements: Ambient Relative Humidity, Temperature, Dew point, Grains per pound Psychrometric chart showing Relative Humidity, Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe) Specifications With built-in Ambient RH + Temperature sensor; Plug-in Contact Temp Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF. Size 3.94” x 3.54” x 1.38” (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth: BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included: Wall Mounting and Tripod Stand Humidity specifications: Range 0 to 100%RH Accuracy ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/tramex-moisture-meters-c-107_125_83/tramex-dl-rhta-feedback-datalogger-p-1899.html Wed, 31 Jan 2024 16:18:17 +0000 USD 1899 Tramex 999 DL-RHTA https://www.abqindustrial.net/store/images/tramex-dl-rhta-feedback-datalogger.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-boats-c-107_155/tramex-smm5-skipper-5-marine-moisture-meter-for-boats-p-1898.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1898 ]]>Tramex SMM5 Skipper 5 Marine Moisture Meter for Boats Identify osmosis problems before blisters appear Identify wet cores in sandwich or cored structures Monitor hulls for drying before repairs and osmosis treatments The Tramex SMM5 Skipper 5 Marine Moisture Meter for Boats is an instant, precise, dual-depth, analog, non-destructive Marine moisture meter which detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. The unique three-electrode array provides both shallow (10 mm / ⅜") and deep (30 mm / 1¼") perceptivity to help establish the depth of any moisture within GRP composites. In addition to the classic moving-coil display, readings may also be sent to the free Tramex App on paired Android and iOS devices. Kit Contents Tramex SMM5 Skipper 5 Marine Moisture Meter for Boats Free App available for Android and iOS One (1) year warranty Features 3 Ranges of Non-destructive sensitivity: Hard Wood / Shallow Depth / G.R.P Dual-Depth penetration allows for comparative of surface and core moisture to help establish the depth of any moisture within GRP composites Deep signal penetration, up to 1 1⁄4" (30mm) in wood and G.R.P, detects elevated moisture at depth without having to damage the materials being tested. Shallow Depth scale is designed to have a field penetration of up to 0.4 inches (10mm) Shallow-depth scale is comparable to pin readings, reading in a smaller, more precise footprint. Wide range of readings from 5% to 30% on Wood Scale and 0 to 100 on comparative scale for G.R.P. Detects excess moisture hidden in GRP boat hulls, decks and coach roofs including sandwich or cored structures. Bluetooth connection to accompanying IOS & Android App allowing for Geo-tagged supportive image-based documentary evidence of moisture measurements and readings. Hold Function which enables the user to “freeze” the reading, useful when taking readings where the meter face may not be visible. High Moisture Audio Warning Tone which can be enabled or disabled. Large clear easy to read analog display giving meaningful readings. Rugged ergonomically designed enclosure. Specifications Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analog Shallow signal up to 0.40" (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 More Info Moisture Mapping & Data Documentation Concrete moisture test results can be visualized with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos. Produc Desing GRP composites and hardwoods are non-conducting materials, nevertheless their electrical properties change with increasing moisture content. The Skipper 5 determines moisture content by applying a high-audio frequency signal between a pair of soft rubber electrodes on the instrument base. A third electrode provides genuine shallow range measurements on a smaller footprint. Capacitive coupling between the electrodes and the sample allows impedance to be determined. This is interpreted as a moisture value and displayed on a large, clear moving coil meter. Additionally, meter readings may be sent instantly to a Tramex App on Android and iOS mobile devices by Bluetooth. Uses: Identify osmosis problems before blisters appear. Identify wet cores in sandwich or cored structures. Monitor hulls for drying before repairs and osmosis treatments. Check timber for excess moisture before painting, sheathing or varnishing. Effective osmosis treatment requires the complete removal of the hygroscopic solutes that are responsible for absorbing and retaining moisture and forming osmotic cells in GRP composites. Featuring both deep and shallow modes the Skipper 5 is the ideal instrument for locating moisture associated with these solutes to help ensure successful treatment. Marine timbers also suffer from excessive moisture which causes blistering and loss of paints and varnishes. Trapped moisture encourages fungal growth and black fungal staining. The Skipper 5 enables quick surveying over moisture over large areas, will read through paints, varnishes and sheathing such as Cascover without causing damage and may be used to find and trace leaks above and below decks. Related Products Tramex Extension Handle for ME5, CME5 and CMEX5 The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Tramex Moisture Encounter 5 Calibration Check Box Calibration Check Box for SKIPPER 5 - SMM5 Downloads Tramex SMM5 Skipper 5 Moisture Meter - Data Sheet Tramex SMM5 Skipper 5 Moisture Meter - Quick Start Guide Tramex SMM5 Skipper 5 Moisture Meter - User Guide Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-boats-c-107_155/tramex-smm5-skipper-5-marine-moisture-meter-for-boats-p-1898.html Fri, 01 Sep 2023 19:26:21 +0000 USD 1898 Tramex 941 SMM5 https://www.abqindustrial.net/store/images/tramex-smm5-skipper-5-moisture-meter.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-2500-4500-coating-thickness-gauges-p-1897.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1897 ]]>High precision coating thickness gauges compatible with a large range of probes for measuring coatings on ferrous and non-ferrous metals MiniTest 2500 - Basic Model with memory and USB output MiniTest 4500 - Adds Batch Memory, Bluetooth Probe Sold Separately Two Models MiniTest 2500 - Basic Model with memory and USB output MiniTest 4500 - Adds Batch Memory, Bluetooth, RS232 and more The ElektroPhysik MiniTest 2500 and 4500 Coating Thickness Gauges are high precision coating thickness gauges compatible with a large range of probes for measuring coatings on ferrous and non-ferrous metals. Different calibration methods and evaluation options for a wide range of tasks in the field of coating measurements. MiniTest coating thickness gauges are not only useful in the laboratory but are equally qualified for use in industrial applications thanks to their rugged housing with a IP 65 rating. Both models feature USB output for connection to notebooks and PCs. The ElektroPhysik MiniTest4500 Coating Thickness Gauges additionally offers a Bluetooth output for wireless data transfer to mobile devices like Smartphones and printers directly on site. All gauge functions can be triggered directly pressing a single key of the illuminated keypad. The large display with background illumination adds to a high level of user comfort and ergonomics. A broad selection of measuring sensors is available for the MiniTest 2500/4500 line of coating thickness gauges allowing it to handle standard applications as well more complex measuring tasks. The scope of application is determined by the sensor connected to the gauge: F-type (ferrous) sensors work according to the magnetic induction principle and can measure non-magnetic coatings such as paint, enamel, rubber, aluminum, chrome, copper, zinc etc applied on iron and steel (including steel alloys and hardened magnetic steels). N-type (non-ferrous) sensors work according to the eddy current principle and measure insulating coatings such as paint, anodizing, ceramics etc. applied on all non-ferrous metals (for example aluminum, copper, zinc die cast, brass etc.) including austenitic steels. FN-type (combination ferrous / non-ferrous) sensors combine both principles and identify the substrate underneath the coating thus automatically switching to the correct measuring principle to measure on base material steel or non-ferrous metal. Kit Contents ElektroPhysik MiniTest 2500 or 4500 Coating Thickness Gauges Rubber protection case x AA battery USB connection cable Instruction Manual Caring Case Probe Sold Separately Features All functions directly accessible Large selection of interchangeable sensors High-contrast display and illuminated keypad Memory and Statistics Bluetooth and USB Output IP 65 Rated Rugged housing Specifications Memory MiniTest 2500 2,000,000 values stored in 1 batch Memory MiniTest 4500 2,000,000 values stored in up to 9500 batches Statistical functions (per batch) MiniTest 2500 kvar, n, max., min. Statistical functions (per batch) MiniTest 4500 kvar, n, max., min., CP, CPK Calibration Factory settings, zero and up to four calibration points Measuring units µm, mm, cm, mils, inch Output MiniTest 2500 USB Output MiniTest 4500 USB and Bluetooth (RS232 optional) Power 3x AA batteries or via USB Norms and standards DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882; ISO 19840; ASTM B 244, B 499, D 7091, E376 Display 53 x 46 mm, backlit Operating temperature -10 - 60 °C / 14 - 140° F Storage temperature -20 - 70 °C / -4 - 158° F Dimensions 153 mm x 89 mm x 36 mm (6” x 3.5” x 1.4”) Weight 320 g (0.7 lbs) (gauge incl. batteries), 90 g (0.2 lbs) rubber protection case Protection class IP 65 Related Products CPS Certified Plastic Shim Set Foils for Coating Thickness Gauge Calibration and Verifications Downloads ElektroPhysik MiniTest 2500 & 4500 Coating Thickness Gauges - Data Sheet ElektroPhysik MiniTest 2500 & 4500 Coating Thickness Gauges - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-minitest-2500-4500-coating-thickness-gauges-p-1897.html Thu, 14 Oct 2021 17:28:18 +0000 USD 1897 ElektroPhysik 1000 2500-4500 https://www.abqindustrial.net/store/images/minitest-2500-4500-coating-thickness-gauges.jpg High precision coating thickness gauges compatible with a large range of probes for measuring coatings on ferrous and non-ferrous metals

---

MiniTest 2500 - Basic Model with memory and USB output

---

MiniTest 4500 - Adds Batch Memory, Bluetooth

---

]]> https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-420-ultrasonic-wall-thickness-gauge-p-1896.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1896 ]]>ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge Uses Pulse-Echo Principle of Ultrasonics Basic Ultrasonic Thickness Gauge with adjustable calibration for a wide range of materials Several Transducers are optionally available including one for High Temperature materials (350 °C) Automatic identification of probes The ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge is a basic straight forward ultrasonic thickness testing gauge for simple quick measurements. The MiniTest 420 incorporates a calibration block for zero adjustments and quick calibration. Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate. NIST Traceable Calibration Certificate optionally available at additional cost Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Uses Pulse-Echo Principle of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring Range Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8") (For ranges of other transducers see table) Resolution 0.01mm (0 - 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec Probe Standard transducer U5.0: 8mm (0.31") - (For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" - (130 X 73 X 24 mm) Accessories Included U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0 8 mm | 0.31" 5.0 MHz 0.8 - 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 - 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 - 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 - 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-420-ultrasonic-wall-thickness-gauge-p-1896.html Thu, 24 Feb 2022 20:22:42 +0000 USD 1896 ElektroPhysik 1000 420 https://www.abqindustrial.net/store/images/minitest-420-ultrasonic-wall-thickness-gauge.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-trc-2-digital-torque-tester-p-1895.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1895 ]]>The SHIMPO TRC torque checker is a user friendly instrument for calibrating torque tools Precise ± 0.5% F.S. ± 1 digit accuracy ensures exact results The SHIMPO TRC torque checker is a user friendly instrument for calibrating or measuring torque values. A single button process does it all. Zero, Test, Store, and repeat. In addition to Average, Maximum, Minimum, and Peak values, the TRC features Red/Green/Red LED's (HI-GO-LO) and audible alarm. It's wide 3,000 data points storage capacity makes large batch testing possible, insuring overall product quality. The TRC torque Checker is USB capable for easy PC/Software interface. Combined with the free DigiTorque_TRC software, graphical display and statistical analysis are performed and collected automatically. The TRC is a portable device powered with internal rechargeable batteries or through a universal AC adapter/charger. The TRC's small foot print saves valuable lab space. It's low profile, (3.82") rugged design, and NIST traceable calibration certificate promotes proper calibration procedures, insuring overall product quality. Features Precise ± 0.5% F.S. ± 1 digit accuracy ensures exact results Variety of applications met with ranges from 17.7 in·lb (2 N·m) all the way to 88.5 in·lb (10 N·m) Memory function allows convenient storage of up to 3000 readings for later retrieval Large, easy to read LCD displays torque values in four selectable engineering units Durable, cast-aluminum heavy-duty construction withstands demanding wear and tear PC connectivity with USB interface and free Digitorq software enables data analysis and graphing on Microsoft® Excel Truly portable with compact, light-weight design and internal, rechargeable batteries Recharge batteries with included 120/240V AC adapter/charger or utilize adapter for continuous use Change measuring modes to capture Average, Maximum or Minimum values in both clockwise (CW) & counterclockwise (CCW) directions Speed up large batch tests with the integral Red/Green LED comparator that responds in accordance to pre-programmed tolerances Includes Factory Certificate, CE Approval and 1 Year Warranty! Specifications Accuracy ±0.5% / F.S. Display Main display: 4-digit LCD display, Character height 0.5” (12 mm); Sub display: 3-digit, 0.29” (7 mm) Comparator Display LED indicates “NG”, “OK”, with adjustable alarm Display Update Time Select from 0.125 sec (8 times/sec), 0.25 sec (4 times/sec), 0.5 sec (2 times/sec), 1 sec (1 time/sec) Measuring Mode MEAN: displays torque value in real time; PEAK: displays peak torque value Overload 120% of full scale Sampling 100 Hz Memory Total 3,000 data (10 sets with 300 data point per set) Data Output USB1.1 (data download by special software) Power NiMH rechargeable battery, and AC adapter 100-240vac, 50/60 Hz Operating Environment 32 -104˚F (0 - 40˚C) 35 - 85%RH (non condensing) Dimensions 12.60” x 8.66” x 3.82” (320 x 220 x 97 mm) Product Weight Approx. 13.25 lb (6.0 kg) Package Weight Approx. 16.2 lb (7.35 kg) Software DigiTorque TRC Free Download from www.shimpoinst.com Included Accessories Torque adapter for driver, AC adapter/charger, USB cable, Mounting bracket, bolts for mounting bracket (2 pcs) Certifications CE Warranty 1 year Ranges Model Capacity TRC-2 17.70 in·lb | 20.39 kg·cm | 200.0 N·cm | 2.000 N-m TRC-5 44.25 in·lb | 50.99 kg·cm | 500.0 N·cm | 5.000 N-m TRC-10 88.5 in·lb | 102.0 kg·cm | 1000 N·cm | 10.00 N-m Downloads Shimpo TRC-2 Digital Torque Tester - Data Sheet Shimpo TRC-2 Digital Torque Tester- Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-trc-2-digital-torque-tester-p-1895.html Fri, 17 May 2024 19:42:07 +0000 USD 1895 Shimpo 1000 TRC https://www.abqindustrial.net/store/images/trc-2-digital-torque-tester.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/imada-dsv-vector-force-gauge-p-1894.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1894 ]]>Vector Force Gauge with Output Built-in tilt sensor with audible alert Accuracy ± 0.2% Measure force in lbs, Kgs or N 7 Ranges up to 220 lbs The DSV digital vector force gauges are simple-to-use basic gauges featuring user-friendly menu operation. The built-in tilt sensor with audible alert warns users of deviations from the reference angle. Selections including unit and measuring mode can be locked to prevent accidental changes. Kit Contents Imada DSV Vector Force Gauge NIST Traceable Calibration Cert Set of six standard attachments AC adapter/charger Instruction Manual Carrying Case Features Includes NIST Traceable Calibration Certificate - ISO-17025 calibration certificate option available Tilt Sensor: Alerts user to deviation from the reference angle Backlit LCD display with user-friendly menus Ergonomic, durable, heavy-duty metal construction 30,000/sec ultra-high sampling rate 1,000 Data memory; automatically calculates Max, Min, Avg statistics USB and RS-232C output Selectable real time or peak mode operation Setting security lock prevents accidental changes Overload capacity 200% F.S.; Display flashes at overload limit Runs on internal Ni-MH batteries (user replaceable) or AC adapter; Charges with USB port or portable charger 2-Year Warranty Specifications Tilt Alarm OFF, Strict (4°), Normal (8°) or Loose (18°) Accuracy ± 0.2% F.S., ± 1 LSD Selectable Units lbf(ozf), kgf(gf) or Newtons Display 4 digit backlit LCD Overload Capacity Approx. 200% of F.S. Overload Alarm Audible alarm at 90% of capacity; Audible alarm and indicator flashes beyond 110% of F.S. Sampling Rate 30,000/second Internal Memory 1,000 data with statistics Battery Life Approx. 30 hours backlight off Approx. 14 hours backlight on 4.5 hours required for full charge Battery Indicator Battery icon displays three levels of charge Setpoints Programmable high/low setpoints with OK indicator Outputs USB, RS-232C Operating Temp. 32° to 100°F (0° to 40°C) Accessories Included AC adapter, Attachments (hook, flat tip, conical tip, chisel tip, notched tip, extension shaft), Carrying Case Ranges Model Capacity Resolution DSV-0.4 7 ozf | 200 gf | 2 N 0.001 ozf | 0.1 gf | 0.001 N DSV-1 17 ozf | 500 gf | 5 N 0.01 ozf | 0.1 gfv 0.001 N DSV-4 4.4 lbf | 2 kgf | 20 N 0.001 lbf | 0.001 kg | 0.01 N DSV-11 11 lbf | 5 kgf | 50 N 0.01 lbf | 0.001 kgf | 0.01 N DSV-44 44 lbf | 20 kgf | 200 N 0.01 lbf | 0.01 kgf | 0.1 N DSV-110 110 lbf | 50 kgf | 500 N 0.1 lbf | 0.01 kgf | 0.1 N DSV-220 220 lbf | 100 kgf | 1000 N 0.1 lbf | 0.1 kgf | 1 N Related Products Imada MX-110 Motorized Vertical Test Stand Mark-10 SW Data Acquisition Software for DS2, Z2 Force Gauges & DTX Torque Gauge Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/imada-dsv-vector-force-gauge-p-1894.html Sun, 05 Feb 2023 13:43:02 +0000 USD 1894 Imada 993 DSV https://www.abqindustrial.net/store/images/dsv-vector-force-gauge.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/checkline-ds-2000led-lsr-laser-stroboscope-tachometer-a4-3005-p-1893.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1893 ]]>LED Stroboscope Tachometer with Laser for Auto-Sync 7 High-Powered LEDs produce peak brightness of 9000 Lux Flash range of 30 - 300,000 fpm (0.5-5000 Hz) IP65-rated housing is extremely water resistant The DS-2000LED-LSR combines the observational features of an LED stroboscope with convenience of a laser tachometer to create the ideal inspection tool. A built-in laser sensor automatically syncs the stroboscope flash rate to the RPM of the rotating object for instant speed measurement while freezing the motion. The DS-2000LED-LSR is fitted with six super-bright LEDs mounted in a precision-machined aluminum head with optimized optics, providing up to 9000 lux light output. The DS-2000LED-LSR-OT model adds an input / output connector for syncing the strobe with an external sensor, vibration analyzer or other equipment. A built-in laser sensor automatically syncs the stroboscope flash rate to the RPM of the rotating object for instant speed measurement while freezing the motion. Kit Contents DS-2000LED-LSR Pocket Laser LED Stroboscope Traceable Calibration Certificate Reflective Tape 2 sets of 3x-AA batteries (6 batteries total) Carrying Case Instruction Manual DS-2000LED-LSR-OT Laser Stroboscope Tachometer &external trigger input/output Traceable Calibration Certificate Connection Cable for input / output Reflective Tape 2 sets of 3x-AA batteries (6 batteries total) Carrying Case Instruction Manual Features Traceable Calibration Certificate provided Produces the brightest flash and sharpest image over the entire range to 300,000 FPM Lifetime LEDs do not wear-out or need replacement Three (3) AA-Batteries provide six hours of continuous use operation 9000 Lux brightness (measured at a distance of 8") Intuitive controls allow user to quickly adjust flash rate and shift phase User-selected units of Hz or FPM (Flashes Per Minute) IP 65 rated housing provides protection from water jets Made in Germany 2-Year warranty Specifications Frequency Range 30 - 300,000 FPM (0.5 - 5000Hz) Flash Duration Adjustable (1 usec up to 8522 usec) Accuracy ± 0.02% ± 500ns Resolution ± 0.1 FPM (30 - 999) ± 1 FPM 1000+ Brightness 9000 Lux @ 200mm (8 inch) Protection Class IP65 (Protection from Dust and Water Jets) Display LCD, multiple lines Certification CE (as per EU norms) Flash Color Approx. 6.500 K Power Supply 3x AA size batteries or 3x NiMH rechargeable batteries Housing Material Aluminum / ABS Heavy duty design Dimensions 191 x 82 x 60 mm / 7.5 x 3.2 x 2.4 inch Weight Approx 400g (including batteries) Temperature Range 0° - 45° C / 32° - 113° F Battery Life NiMH: approx 11h at 6.000 FPM Disposable: approx 6 h at 6.000 FPM Warranty 2 Years Default Settings FPM 1000, Hz 16.6, PULSE µs 333, PULSE deg 2°, DELAY ms 0.0, PHASE deg 0°, DIVIDER 1, OPTION 0 Trigger Input (-OT version) 3 - 32 V, NPN + PNP Low Level: < 1 V Principle: Optocoupler, voltage-free Trigger Output (-OT version) Level: max. NPR, max 32V Pulse Length: Adjustable Maximum current: 50mA Reverse voltage protection: Yes Principle: Short-circuit and overvoltage proff transistor output to the optocoupler control, non-isolated Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/stroboscopes-c-106_14/checkline-ds-2000led-lsr-laser-stroboscope-tachometer-a4-3005-p-1893.html Mon, 27 Sep 2021 19:03:56 +0000 USD 1893 Checkline 998 DS-2000LED-LSR https://www.abqindustrial.net/store/images/ds-2000led-lsr-laser-stroboscope-tachometer.jpg LED Stroboscope Tachometer with Laser for Auto-Sync

---

7 High-Powered LEDs produce peak brightness of 9000 Lux

---

Flash range of 30 - 300,000 fpm (0.5-5000 Hz)

---

IP65-rated housing is extremely water resistant

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/mitutoyo-dp-1vr-spc-statistical-processor-printer-p-1892.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1892 ]]>Mitutoyo SPC statistical processor/printer Portable printer for use with force and torque gauges. Features This is a palm-sized printer used to print measurement data from the digimatic gage or to perform statistical analysis. This printer offers excellent functionality. You can use it not only to print measurement data, perform a variety of statistical analyses, and draw a histogram or D chart but also to perform complicated operations for X-R control chart. Equipped with RS-232C output and GO/NG judgment output as standard functions, this processor ensures high reliability as an advanced quality inspection machine. The line thermal printer enables fast and quiet printing. Downloads Mitutoyo DP 1VR SPC Statistical Processor Printer - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/mitutoyo-dp-1vr-spc-statistical-processor-printer-p-1892.html Sun, 25 Jun 2023 20:21:16 +0000 USD 1892 Mitutoyo 1000 DP-1VR https://www.abqindustrial.net/store/images/dp-1vr-mitutoyo-spc-statistical-processor-printer.jpg https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-313-usb-laser-speed-sensor-tachometer-p-1891.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1891 ]]>USB Laser Speed Sensor / Tachometer Includes Software for Android or PC The Compact CheMiniVLS 313 is a laser speed sensor with USB output for sending data direct to a PC or Android device. Kit Contents MiniVLS 313 USB Laser Speed Sensor Tachometer USB 2.0 to mini-B 5 pin Cable USB 3.1 Type C Male to USB 2.0 Type A Female Socket Adapter with OTG OTG USB On The Go Host Adapter Cable USB A Female to Micro B Black Reflective Tape Instruction Manual Features Pocket Sized Design Selectable Sampling, from 0.1s to 5s Powered by USB, no batteries or external power required Can be used to measure RPM or Linear Speed Specifications Optical Laser Range 2 - 78 in / 50mm - 2000mm Light Source Red Laser Class II 635nm Optical Angle ± 80° degree to reflective marker Speed Measurement Range 3 - 99,999 rpm Resolution 0.001 rpm Operating Temperature 32 - 122 F / 0 - 50 C Baud Rate 115,200 Connector / Power Source Mini USB Sampling Rate 0.1s to 5s (Adjustable) Dimensions .78 - 2.55 in / 20 x 65 mm Downloads MiniVLS 313 USB Laser Speed Sensor Tachometer - Data Sheet MiniVLS 313 USB Laser Speed Sensor Tachometer - Instruction Manual MiniVLS 313 USB Laser Speed Sensor Tachometer - Windows Software Albuquerque Industrial https://www.abqindustrial.net/store/stroboscopes-and-tachometers-c-106/handheld-tachometers-c-106_13/compact-minivls-313-usb-laser-speed-sensor-tachometer-p-1891.html Thu, 15 Jun 2023 19:06:48 +0000 USD 1891 Compact 977 MiniVLS-313 https://www.abqindustrial.net/store/images/minivls-313-usb-laser-speed-sensor-tachometer.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/caisson-vi-d4-concrete-moisture-meter-p-1890.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1890 ]]>Concrete Moisture Meter Measuring depth of 2 inches (50 mm) 7 Built-in Factory Calibrations Gold Plated Sensors 5-Year Warranty The Caisson VI-D4 Concrete Moisture Meter is designed for fast and accurate non-destructive measurement. The meter features seven factory-programmed calibrations, along with goldplated sensor electrodes. The Caisson VI-D4 2 inputs for external sensors: 3.5mm for connecting external probes for resistance measurements in wood and other construction materials. The meters has an integrated scale according to the international standard for wood moisture measurement. Also the restance can be measured in Ohms up to 30 Gigaohms. Mini-USB for air humidity and temperature sensors. The equilibrium moisture percentage in concrete can be measured with the proper sensor and the dewpoint can be automatically calculated along with the surface temperature using the available IR-sensor. Kit Contents VI-D4 Concrete Moisture Meter Calibration Certificate 2x AA batteries Instruction Manual Carrying Case Features Measuring depth of 2 inches (50 mm) 7 User-Selectable Calibration Materials Compatible with optional External Sensors Gold-Plated Sensing Contacts offer High-Precision and a Long-Life Supplied with Factory Calibration Certificate 5 Year Warranty CE Certified Specifications Sensing Element 8 gold plated contact points and 2 sensor plates Accuracy +/-0.5% Display graphic monochrome 128x64 pixels, size 61x33mm with backlight Operating Temp 41° - 104°F / 5° to 40°C Power 2x AA Batteries (included) Battery Life up to 20 hours Weight .48 lbs / 215 g Dimensions 5.8" x 3.5" x 1" / 147mm x 89mm x 24mm Warranty 2 Years Calibrations Concrete (0-6%H2O) The concrete scale shows the relation between the weight of pure water contained in the tested material with its dry weight. The scale range varies between 0 and 6% as 6% is about the maximum physically possible content of water in the concrete. The obtained results should not be confused with moisture emission or any other humidity measurement methods. Cement Screed (0-6%H2O) This scale is used to measure the moisture content of cement screed. The content of water is expressed as a percentage of weight. Cement Screed (0-4% CM) This scale is used to measure the moisture content of cement screed. The displayed value is an approximate value that can be also determined using the Carbide Method (CM). Anhydritestrich (0-3.5% H2O) This scale is meant for moisture measurements in anhydrite floors. The displayed value is an approximation of a value that normally would be indicated using a CM-measurement device. Anhydritestrich (0-1.9% CM) This scale is used to measure the moisture content of A screed. The displayed value is an approximate value that can be also determined using the Carbide Method (CM). Caisson Scale 0.3-15.3 (0.3-15.3m) The scale works in a similar way as the Relative with a range from 0.3 to 15.3m Relative Scale (0-100%) The relative scale may be used in humidity level comparison of various materials. Obtained results should not be interpreted as percentage content of water in tested surfaces. There is no linear correlation between the outcomes and relative humidity. The scale should be used only as a comparison technique. Scale may be used on the surfaces where direct contact with pure concrete is impossible because of some layer/covering. Downloads VI-D4 Concrete Moisture Meter - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/caisson-vi-d4-concrete-moisture-meter-p-1890.html Thu, 20 May 2021 04:39:52 +0000 USD 1890 Caisson 972 VI-D4 https://www.abqindustrial.net/store/images/vi-d4-concrete-moisture-meter.jpg Concrete Moisture Meter

---

Measuring depth of 2 inches (50 mm)

---

7 Built-in Factory Calibrations

---

Gold Plated Sensors

---

5-Year Warranty

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/checkline-daw-digital-adjustable-torque-wrench-p-1889.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1889 ]]>Digital Adjustable Torque Wrench 3 Models with Capacities up to 250 lb-ft / 340 Nm 9 Programmable Target Torque Set-points The DAW Series of Digital Adjustable Torque Wrenches are designed for simple and precise measurements in industrial, automotive, aerospace, and many other applications. The DAW displays Real-Time and Peak torque on a large LCD display in ft-lb, in-lb,r N-m or kg-cm (user-selectable). The DAW features rugged adjustable steel jaws and the ability to program 9 target setpoints. 12 bright LEDs and an audible alarm alert the operator when the applied torque approaches and reaches the desired target. Kit Contents DAW Digital Adjustable Torque Wrench Calibration Certificate 2x AA batteries Carrying Case Instruction Manual Features 9 Programmable Target Torque Set-points Displays Torque in-lbs, ft-lbs, N-m, Kg-cm (User selectable) CW operation (CCW with display facing away from operator) Peak or Real-Time (track) mode (User Selectable) Buzzer and LED indicator for the pre-settable target torque 50 data point memory Auto shutdown after 5 minutes of non use Includes Calibration Certificate CE Certified Specifications Accuracy CW 3% of indicated From 20 - 100% of capacity Memory 50 Readings for recall on display, no output, 9 Presets Unit Selection ft-lb, in-lb, N-m, kg-cm Battery 2x AA Battery Life 110 Continuous Hours | 1 Year Standby Operating Temperature -10°C ~ 60°C Storage Temperature -20°C ~ 70°C Humidity Up to 90% non-condensing Warranty 1 Year Ranges Model Range / Resolution Drive Size Length DAW-60N 3 - 60 Nm / 0.01 Nm 26.5 - 530 lb-in / 0.1 lb-in 2.2 - 44 lb-ft / 0.01 lb-ft 5-27 mm 0.2 - 1.06 in 428 mm 16.85 in DAW-135N 6.8 - 135 Nm / 0.1 Nm 60 - 1200 lb-in / 1 lb-in 5 - 100 lb-ft / 0.1 lb-ft 5-27 mm 0.2 - 1.06 in 428 mm 16.85 in DAW-340N 17 - 340 Nm / 0.1 Nm 12.5 - 250 lb-ft / 0.1 lb-ft 10-41 mm 0.39 - 1.61 in 650 mm 25.6 in Other ranges available, inquire Related Products GEK Adjustable And Ratchet Digital Torque Wrenches DTW Digital Torque Wrench CW and CCW operation Buzzer and LED indicator for the pre-settable target torque ETW Digital Torque Wrench with Memory and Data Output Bi-Directional Accuracy better than 1% from 10%-100% of Capacity USB output & data transfer / analysis software DTL 1/4" Mini Digital Torque Wrench Displays in-lb, N-m, Kg-cm and ft-lb units (User selectable) CW and CCW operation Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/checkline-daw-digital-adjustable-torque-wrench-p-1889.html Wed, 03 Apr 2024 18:25:12 +0000 USD 1889 Checkline 990 DAW https://www.abqindustrial.net/store/images/daw-digital-adjustable-torque-wrench.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-secotest-cross-hatch-cutter-p-1888.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1888 ]]>Blades Sold Separately For testing according to ISO 2409 and ASTM D3359-02 Multi cutting blade with 6 cutting edges Cutting edges lie on the surface With Magnifying glass for clear evaluation of the cut edges Exceptionally strong and handy cross hatch cutter made on the lines of DIN EN ISO 2409 and ASTM D3359-02 to conduct cross cut tests. The SecoTest is used for the assessment of adhesiveness of single or multiple coatings (varnishes, synthetic materials, etc.) on hard (steel) and soft (wood) substrates. The cross cut testers of the SecoTest series consist of a sturdy holder for the six-edge multi cutting blade and a rotatable non-slip grip, which prevents the multi cutting blade from canting. To ensure that this procedure is repeatable, put the test object through a suitable conditioning process (see DIN EN ISO 2409, section 6); while testing at construction sites make a note of the ambient conditions in the test report. The procedure defined by ISO 4642 can be employed to measure adhesiveness. Kit Contents SecoTest gauge with cutting head Hex tip screwdriver for changing the blades Magnifier for visual inspection Brush Carrying case Instruction Manual Blades are sold separately Features High-grade, tool-steel multi cutting blade in 4 different models with standard cutting-edge geometry Movable cutter head Multi cutting blade with 6 cutting edges Versions for tests according to DIN EN ISO 2409 and ASTM D 3359 Cutting edges lie on the surface With Magnifying glass for clear evaluation of the cut edges Specifications Dimensions 18 x 3,8 x 3 cm Weight 330 gram Warranty 1 year SecoTest 1 Coating Thickness up to 60 μm on hard substrates (e.g. metal, plastics) 6 x 1 mm Number of cutting edges x distance (mm) Norm DIN EN ISO 2409 SecoTest 2 Coating Thickness up to 60 μm on soft substrates (e.g. wood, render) Coating Thickness from 61 μm to 120 μm on hard and soft substrates 6 x 2 mm Number of cutting edges x distance (mm) Norm DIN EN ISO 2409 SecoTest 2 Coating Thickness from 51 μm to 125 μm 6 x 2 mm Number of cutting edges x distance (mm) Norm ASTM D 3359 SecoTest 3 Coating Thickness from 121 μm to 250 μm on hard and soft substrates 6 x 3 mm Number of cutting edges x distance (mm) Norm DIN EN ISO 2409 SecoTest 4 Coating Thickness up to 50 μm 11 x 1 mm Number of cutting edges x distance (mm) Norm ASTM D 3359 Downloads ElektroPhysik SecoTest Cross Hatch Cutter - Data Sheet ElektroPhysik SecoTest Cross Hatch Cutter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/coating-thickness-gauges-c-97_8/elektrophysik-secotest-cross-hatch-cutter-p-1888.html Fri, 15 Oct 2021 19:14:19 +0000 USD 1888 ElektroPhysik 995 SecoTest https://www.abqindustrial.net/store/images/elektrophysik-secotest-cross-hatch-cutter.jpg For testing according to ISO 2409 and ASTM D3359-02

---

Multi cutting blade with 6 cutting edges

---

Cutting edges lie on the surface

---

With Magnifying glass for clear evaluation of the cut edges

---

]]> https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/sonic-testers-c-100_40/dakota-ultrasonics-r9-pr-9-sonic-tester-thickness-gauge-z-309-0001-z-309-0002-p-1887.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1887 ]]>Dakota Ultrasonics R9 (PR-9) Sonic Tester Thickness Gauge Z-309-0001 / Z-309-0002 is a dedicated design for the racing industry Factory calibration traceable to NIST & MIL-STD-45662A. Range: Measures from 0.025 to 36.00 inches (0.63 to 914.4 millimeters). Range dependent on material and transducer type. The Dakota Ultrasonics R9 (PR-9) Sonic Tester Thickness Gauge Z-309-0001 / Z-309-0002 is a dedicated design for the racing industry, and commonly used to measure the thickness of cylinder walls, head ports, decks, chassis tubing, body panels, and windshields. An additional benefit is the dual element style of probe with the ability to locate blind surface corrosion or deterioration on the blind surface in the water jacket area prior to boring a cylinder or port.The high speed scan feature takes 100 measurements per second to save time when scanning a complete cylinder.Simply drag the probe from the bottom of the cylinder, at a given clock position in the cylinder, up to the deck area to locate the minimum thickness found.Scan can then be switched off and the user can find the exact location of the minimum thickness. The PR-9 has three material calibration options (single point, two point, and target velocity) for increased accuracy.Cylinder wall mapping software available for manually creating reports.Finally, our 5 year limited warranty indicates how we feel about the quality. Kit Contents Dakota Ultrasonics PR-9 Ultrasonic Thickness Gauge Probe, 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate Operating Instruction Manual Foam-fitted carrying case Features Includes NIST Calibration Certificate Special-purpose probes are offered for a variety of applications High Speed Scan Mode displays the lowest measurement found during a scan Resolution of 0.001 inch (0.01 mm) 5 Year Warranty* CE Certified Specifications Range Measures from 0.025 to 36.00 inches (0.63 to 914.4 millimeters). Range dependent on material and transducer type. Resolution .001 inches / 0.01mm Velocity Range 0.0120 to .7300 in/μs / 305 to 18,542 m/sec Units English & Metric (inch or mm) Transducer Types Dual Element (1 to 10 MHz) Power Source Two 1.5V alkaline, 1.2V NiCad, or 1.5V Lithium AA cells. Battery Life Typically operates for 45 hours on alkaline and 23 hours on NiCad. Low battery indicator on display. Auto shut-off after 5 minutes of inactivity. Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 in digit height Keyboard Sealed membrane that is resistant to both water and petroleum products. Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -22 to 167F (-30 to 75C) Weigth, net 11 ounces Dimensions 2.5 W x 5.17 H x 1.24 D inches / 63.5 x 131.3 x 31.5 mm Warranty 5 year limited (90 days on probes) Certification CE Approved, Factory calibration traceable to national standards Downloads Dakota Ultrasonics PR 9 Ultrasonic Thickness Gauge Sonic Tester Racing with T 104 2120 Probe For Cylinders Walls Decks Sonic Testers Transducers- Accessories Dakota Ultrasonics PR 9 Ultrasonic Thickness Gauge Sonic Tester Racing with T 104 2120 Probe For Cylinders Walls Decks - Data Sheet Dakota Ultrasonics Engine Builders Racing Sonic Testers Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/sonic-testers-c-100_40/dakota-ultrasonics-r9-pr-9-sonic-tester-thickness-gauge-z-309-0001-z-309-0002-p-1887.html Tue, 04 Jun 2024 19:23:28 +0000 USD 1887 Dakota Ultrasonics 988 PR-9 https://www.abqindustrial.net/store/images/dakota-ultrasonics-pr9thickness-gauge-probe-t-104-2120.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-oil-content-monitor-analyzer-c-104_93/horiba-s-316-5200100690-extraction-solvent-oil-p-1886.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1886 ]]>Horiba S-316 # 100690 Extraction Solvent Oil 1.5 Kg Bottle # 5200100690 Prepare the calibration solution to calibrate the infrared Spectrometer OCMA: pure solvent (zero Calibration), solvent + oil (span calibration) Extract the oil and grease from the sample Perform the measurement by Infrared Absorption (NDIR) Clean the measurement cel The Horiba S-316 # 100690 is the solvent recommended in the ASTM Method D 7066-04 "Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination". Extraction solvent used with HORIBA Oil in Water analyzers OCMA (models, OCMA-310, OCMA-550, and OCMA-500). The solvent Horiba S-316 is used to extract the oil and grease (Total Hydrocarbons) from a water based sample as well as to extract hydrocarbons from metal parts (for contamination check). This solvent is required to: Prepare the calibration solution to calibrate the infrared Spectrometer OCMA: pure solvent (zero Calibration), solvent + oil (span calibration) Extract the oil and grease from the sample Perform the measurement by Infrared Absorption (NDIR) Clean the measurement cel One bottle of S-316 allows performing up to 40 measurements* on a previously calibrated OCMA-550 analyzer Ingredient Name % CAS Number Polychlorotrifluoroethylene 65 - 75 % 9002-83-9 Chlorotrifluoroethylene Trimer or Tetramer 25 - 35 % 9002-83-9 *Base on 20 ml per measurement (15 ml for extraction and 5ml for cell cleaning) Specifications Net Weight 1.5 kg Color Colorless Volume approx. 847 ml Density 1.77 at 20˚C Viscosity at 100 °F 0.72 - 1.1 cs Boiling Point 134°C (273.2°F) IR Absorption at 2930 cm-1 or 3.4 µm Certificate of Analysis on request (please specify the lot number) Downloads Horiba S-316 Extraction Solvent Oil - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-oil-content-monitor-analyzer-c-104_93/horiba-s-316-5200100690-extraction-solvent-oil-p-1886.html Thu, 30 Dec 2021 23:07:20 +0000 USD 1886 Horiba 803 S-316 https://www.abqindustrial.net/store/images/horiba-s-316-extraction-solvent-oil.jpg Prepare the calibration solution to calibrate the infrared Spectrometer OCMA: pure solvent (zero Calibration), solvent + oil (span calibration)

---

Extract the oil and grease from the sample

---

Perform the measurement by Infrared Absorption (NDIR)

---

Clean the measurement cel

---

]]> https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1109-peel-fixture-p-1884.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1884 ]]>Maintains 90° angle between the table and the direction of pull Optional adjustable angle mount tilts the fixture up to ±30°. Conforms to ASTM D6862, D3330, and D903 The Mark 10 G1109 Peel Fixture is designed for peel testing of tapes, films, foil seals, and other materials, per ASTM D6862 / D3330 / D903. A large, flat working table moves horizontally as the test stand’s crosshead moves up via direct cable linkage. An optional adjustable-angle mount tilts the fixture up to ±30°. Another optional adapter uses an adjustable pulley to set the angle of pull, from 0° to 90°, while the working table remains horizontal. The horizontal orientation is suited for seal testing of filled containers, and can also be used for tapes and other materials. An integrated limit switch automatically stops the motion of an ESM303 motorized test stand when the working table has reached its end of travel. Kit Contents Mark-10 G1109 90° Peel Fixture Limit switch cable Crosshead bracket G1078 miniature bollard grip Test stand mounting adapter Mounting hardware Features Maintains 90° angle between the table and the direction of pull Optional adjustable angle mount tilts the fixture up to ±30°. Optional adjustable angle adapter with pulley, 0° to 90°, while preserving horizontal table orientation (max. force: 30 lbF [150 N]) Large working area with threaded mounting holes Compatible with the ESM303 motorized test stand. Optional adapter available for ESM750 / ESM1500. Compatible only with force gauges, not remote load cells Conforms to ASTM D6862, D3330, and D903 Note: not compatible with the ESM303 test stand when ordered with the AC1062 load cell/indicator mounting kit. Specifications Maximum force 100 lbF (500 N) Maximum table travel 8.2 in (210 mm) Weight (G1109 only) 6.0 lb (2.7 kg) Downloads Mark-10 G1109 Peel Fixture - Data Sheet Mark-10 G1109 Peel Fixture - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-mark10-c-101_66/mark-10-g1109-peel-fixture-p-1884.html Thu, 01 Jun 2023 17:09:33 +0000 USD 1884 Mark-10 998 G1109 https://www.abqindustrial.net/store/images/mark-10-g1109-peel-fixture.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-pgd12184-digital-pit-gauge-by-exacto-gal-pgd12184-p-1881.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1881 ]]>G.A.L. Gage Co. Cat # PGD12184 Digital Pit Gauge by Exacto GAL-PGD12184 The G.A.L. Gage Co. GAL-PGD12184 Digital Pit Gauge is a top of the line tool. Profiles can be assessed quickly and accurately by sliding the digital gauge along the bridging bar. Notched feet and ceramic magnets prevent the bridge from rocking on the pipe. The magnets securely hold the bridge in place which makes it ideal when working upside down. Locking adjustment screws allows instant calibration to reference surface. Pointed and needle tips find the deepest section of pits with ease Kit Contents PGD12184 Digital Pit Gauge by Exacto Extension Rods Needle Tip Conical Tip Indicator reads Inch and Metric Protective Case Downloads G.A.L. Gage-PGD12184 Digital Pit Gauge by Exacto Cat # PGD12184 - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-pgd12184-digital-pit-gauge-by-exacto-gal-pgd12184-p-1881.html Mon, 21 Feb 2022 21:45:39 +0000 USD 1881 G.A.L. Gage Co. 995 PGD12184 https://www.abqindustrial.net/store/images/GAL-Gage-PGD12184-Digital-Pit-Gauge.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-33-mini-pit-gauge-gal-33-p-1880.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1880 ]]>G.A.L. Gage Co. Cat # 33 Mini Pit Gauge GAL-33 Checks pits up to ,025, in .05 increments All in a Pocket-Size Pouch. Check fillets and pits in one conveniently small package Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-33-mini-pit-gauge-gal-33-p-1880.html Mon, 21 Feb 2022 21:40:42 +0000 USD 1880 G.A.L. Gage Co. 996 GAL-33 https://www.abqindustrial.net/store/images/Gal-Gage-33.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-20-combo-welding-gauge-gal-20-p-1879.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1879 ]]>G.A.L. Gage Co. Cat # 20 Combo-Welding Gauge GAL-20 Digital Welding Gauge Kit Contents Root Size Fillet Weld Leg Butt Weld Height Fillet Weld Throat Angle of Preparation Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-20-combo-welding-gauge-gal-20-p-1879.html Mon, 21 Feb 2022 21:18:48 +0000 USD 1879 G.A.L. Gage Co. 980 GAL-20 https://www.abqindustrial.net/store/images/GalGage-20.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-8d-12-piece-fillet-weld-set-gal-8d-p-1878.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1878 ]]>G.A.L. Gage Co. Cat # 8d 12-Piece Fillet Weld Set 1/32" Increments to 1/2", 1/16" Increments to 1" GAL-8d Check Fillet Leg & Throat Size Increments: 1/32" to 1/2", 1/16" to 1" Downloads G.A.L. Gage Co. Cat # 8d 12-Piece Fillet Weld Set GAL-8d - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-8d-12-piece-fillet-weld-set-gal-8d-p-1878.html Tue, 22 Feb 2022 21:48:42 +0000 USD 1878 G.A.L. Gage Co. 945 GAL-8D https://www.abqindustrial.net/store/images/GAL-Gage-8d-12-pcs-Fillet-Weld-Set.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-7l-w-t-p-s-gauge-block-and-mini-maglite-flashlight-gal-7l-p-1877.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1877 ]]>G.A.L. Gage Co. Cat # 7L W.T.P.S. Gauge / Block and Mini Maglite Flashlight GAL-7L The G.A.L. Gage Co. GAL-7L W.T.P.S. Gauge / Block and Mini Maglite Flashlight is made of stainless steel. All markings and dimensions are laser engraved for ease and clarity when reading. Gauge set comes with a precision ground calibration block; each block has been surface ground to 0.0005 tolerance for exceptional accuracy. Kit Contents G.A.L. Gage Co. Cat # 7L W.T.P.S. Gauge / Block and Mini Maglite Flashlight GAL-7L Mini Maglite® AAA Flashlight (Lumens: 100) Pocket Clip Batteries Protective carry case Downloads G.A.L. Gage Co. Cat # 7L W.T.P.S. Gauge / Block and Mini Maglite Flashlight GAL-7L - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-7l-w-t-p-s-gauge-block-and-mini-maglite-flashlight-gal-7l-p-1877.html Tue, 22 Feb 2022 21:47:04 +0000 USD 1877 G.A.L. Gage Co. 999 GAL-7L https://www.abqindustrial.net/store/images/GalGage-7L.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/oven-temperature-data-loggers-c-97_48/defelsko-temperature-probes-for-positest-otl-oven-temperature-logger-p-1876.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1876 ]]>DeFelsko Temperature Probes for PosiTest OTL Oven Temperature Logger A wide variety of temperature probes are available for the PosiTesT OTL Certificate of calibration showing traceability to NIST included PosiTest OTL Sold Separately A wide variety of temperature probes are available for the DeFelsko PosiTesT OTL with 1.8 or 3.6 m (6' or 12') stainless steel braided cables (sold separately). Certificate of Calibration showing traceability to NIST included. Name Description Probe Spring Clamp - Surface Probe PRBOTLCS6 1.8m (6') -100 to 500°C (-148 to 930°F) Spring Clamp - Surface Probe PRBOTLCS12 3.6m (12') -100 to 500°C (-148 to 930°F) Spring Clamp - Air Probe PRBOTLCA6 1.8m (6') -100 to 500°C (-148 to 930°F) Spring Clamp - Air Probe PRBOTLCA12 3.6m (12') -100 to 500°C (-148 to 930°F) Magnetic - Surface Probe PRBOTLMS6 1.8m (6') -100 to 300°C (-148 to 570°F) Magnetic - Surface Probe PRBOTLMS12 3.6m (12') -100 to 300°C (-148 to 570°F) Magnetic - Air Probe PRBOTLMA6 1.8m (6') -100 to 300°C (-148 to 570°F) Magnetic - Air Probe PRBOTLMA12 3.6m (12') -100 to 300°C (-148 to 570°F) Washer - Surface Probe PRBOTLW6 1.8m (6') -100 to 500°C (-148 to 930°F) Washer - Surface Probe PRBOTLW12 3.6m (12') -100 to 500°C (-148 to 930°F) Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/oven-temperature-data-loggers-c-97_48/defelsko-temperature-probes-for-positest-otl-oven-temperature-logger-p-1876.html Tue, 02 Apr 2024 17:07:01 +0000 USD 1876 DeFelsko 989 PRBOTL https://www.abqindustrial.net/store/images/DeFelsko-Probe-for-PosiTest-OTL-Oven-Temperature-Logger.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/oven-temperature-data-loggers-c-97_48/defelsko-positest-otl-oven-temperature-logger-p-1875.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1875 ]]>DeFelsko PosiTest OTL Oven Temperature Logger Bright LEDs indicate logger status at a glance Certificate of calibration showing traceability to NIST included Measures and records oven temperature profiles The DeFelsko PosiTest OTL Oven Temperature Logger measures and records up to 40,000 datasets (240,000 readings) into 6 independent batches High temperature stainless steel barrier box with fiberglass insulation for long run times at high temperatures. Contains no silicone. 6 K-type thermocouple ports (channels) Download, view, and analyze batch data using PosiSoft Desktop Software. Export .CSV files for easy import into spreadsheets. Wide variety of probes available with 1.8 or 3.6 m (6' or 12') stainless steel braided cables (sold separately) Kit Contents The DeFelsko PosiTest OTL Oven Temperature Logger Kit includes everything needed for testing: PosiTest OTL Oven Temperature Logger stainless steel high temperature barrier box Choice of holder 6 engraved probe ID tags 2 AAA batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Carrying case and instructions Two (2) year warranty Features  Simple, easy-to-use interface 6 K-type thermocouple ports (channels) Measures and records up to 40,000 datasets (240,000 readings) into 6 independent batches Records measurements every 2 seconds for up to 22 hours of recording time Download, view, and analyze batch data using PosiSoft Desktop Software. Export .CSV files for easy import into spreadsheets. Bright LEDs indicate logger status at a glance High temperature stainless steel barrier box with fiberglass insulation for long run times at high temperatures. Contains no silicone. Certificate of calibration showing traceability to NIST included Specifications Channels 6 K-type non-grounded thermocouples Thermocouple Measurement Range -100 to 1000ºC -148 to 1832ºF Logger Operating Temperature Range PosiTest OTL without Holder or Barrier Box 0 to 70º C 32 to 158º F Logger Accuracy ±0.5º C ±0.9º F Resolution 0.1º C 0.1º F Memory 40,000 Datasets. Each Dataset consists of up to 6 channels. Sample Interval 2 seconds (Fixed) Maximum recording time is 22 hours Power Source 2 AAA batteries Battery Life 30 hours (recording time) Size 48 x 35 x 19 mm (19" x 14" x 7.5") Weight* 9 kg (20 lbs.) * Weight includes the PosiTest OTL Holder, and Barrier Box. Holder XT increases weight to 11 kg (25 lbs.) Comparison Chart The PosiTest OTL is available in two configurations. The PosiTest OTL XT features an enhanced holder with heatsink for greater endurance at high temperatures Temperature PosiTest OTL (OTLKIT) PosiTest OTL XT (OTLKITXT) 150º C (302º F) 90 minutes 300 minutes 200º C (392º F) 65 minutes 200 minutes 250º C (482º F) 50 minutes 140 minutes 300º C (572º F) not recommended 100 minutes PosiTest OTL Kit PosiTest OTL XT Kit The chart and table above represent the combined thermal characteristics of the PosiTest OTL, Barrier Box and choice of Holder/Holder XT. PosiSoft Desktop FREE powerful desktop software (PC/Mac) for downloading, viewing, printing, and storing measurement data. Add batch annotations, label individual channels, set threshold temperatures, and compare datasets to reference batches. Includes a customizable, templated PDF Report Generator. No internet connection required. Customizable PDF Report Generator Graph Readings for up to 6 channels and compare to stored reference profiles Store optimal cure reference profiles to compare measurement results Select one or more reference channels to plot alongside measurement data Start At Temperature sets the time to 00:00 when the selected channel reaches the threshold temperature, making it easier to compare logged batch results with reference data Use cursor to hover and identify individual channels (traces) Rename channels Add up to 3 Threshold Temperatures to calculate Time above Temperature Add an image to identify probe placement Add imagery and notes to any report Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Temperature Probes A wide variety of temperature probes are available for the PosiTesT OTL with 1.8 or 3.6 m (6' or 12') stainless steel braided cables (sold separately). Certificate of Calibration showing traceability to NIST included. Name Description Probe Spring Clamp - Surface Probe PRBOTLCS6 1.8m (6') -100 to 500ºC (-148 to 930ºF) Spring Clamp - Surface Probe PRBOTLCS12 3.6m (12') -100 to 500ºC (-148 to 930ºF) Spring Clamp - Air Probe PRBOTLCA6 1.8m (6') -100 to 500ºC (-148 to 930ºF) Spring Clamp - Air Probe PRBOTLCA12 3.6m (12') -100 to 500ºC (-148 to 930ºF) Magnetic - Surface Probe PRBOTLMS6 1.8m (6') -100 to 300ºC (-148 to 570ºF) Magnetic - Surface Probe PRBOTLMS12 3.6m (12') -100 to 300ºC (-148 to 570ºF) Magnetic - Air Probe PRBOTLMA6 1.8m (6') -100 to 300ºC (-148 to 570ºF) Magnetic - Air Probe PRBOTLMA12 3.6m (12') -100 to 300ºC (-148 to 570ºF) Washer - Surface Probe PRBOTLW6 1.8m (6') -100 to 500ºC (-148 to 930ºF) Washer - Surface Probe PRBOTLW12 3.6m (12') -100 to 500ºC (-148 to 930ºF) Accessories Probe ID Tags OTLTAG Replacement engraved ID tags for temperature probes Downloads DeFelsko PosiTest OTL Oven Temperature Logger- Data Sheet DeFelsko PosiTest OTL Oven Temperature Logger - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/oven-temperature-data-loggers-c-97_48/defelsko-positest-otl-oven-temperature-logger-p-1875.html Tue, 02 Apr 2024 17:03:53 +0000 USD 1875 DeFelsko 978 OTL https://www.abqindustrial.net/store/images/DeFelsko-PosiTest-OTL-Oven-Temperature-Logger.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/glossmeters-c-102_53/horiba-ig-340-3200820832-handy-gloss-checker-meter-p-1874.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1874 ]]>Horiba IG-340 # 3200820832 Handy Gloss Checker / Meter Compact, Lightweight and Easy Operation Large Screen Display Gloss is important visual property of object's surface. The degree of light reflected from the object's surface is termed glossiness. However, the perception of glossiness is subjective and depends on the weather conditions, physical abilities of watching person etc. The Horiba IG-340 Handy Gloss Checker helps to quantify gloss measurement and perform objective numerical gloss value. The Horiba IG-340 Handy Gloss Checker's user friendly interface allows intuitive operations for instant gloss measurement on site. Due to ergonomic and light weight design the Horiba IG-340 Handy Gloss Checker can be hold and operated by one hand. High accuracy, repeatability and precision proven by more than 50,000 units sold worldwide makes it indispensable in object's appearance check and quality control. Horiba IG-340 Handy Gloss Checker uses very common measurement angel 60°, which allows accurate measurement from low gloss surfaces to highly polished textures. This enables gloss measurement of different materials: stone, wood, leather, rubber, glass, metal, plastic, and various application fields from floor maintenance, car polishing to stone and building materials appearance inspection. Ingress Protection IP42* enables outdoor gloss measurement and use in the fields where water drops are present. Internal memory can store 100 readings and 200 average data with time and date. Instant data output via USB connection and without any dedicated software allows QA and other professional reports to be easily generated. The Horiba IG 340 Handy Gloss Checker does not need any special measurement technique. It can be easily used by everyone and become your right hand in reporting about performed works and quality inspection. Kit Contents Horiba IG-340 Handy Gloss Checker Protective cover with integrated calibration tile Soft case Lens cleaning cloth Features Compact, Lightweight and Easy Operation 30% smaller than the previous model the IG-320 Easy to hold and carry by one hand Gloss values can be easily managed on site with one button one function operation Environmental Rating IP (Ingress Protection) rates at IP42* Can be used for outdoor gloss measurement such as construction sites, solar panels, ships, trains and buses Also can be used for stone polishing and other applications where water drops are present Large Screen Display Indicated values can be easily confirmed when IG-340 is placed on the floor during floor cleaning and maintenance works Internal Memory for Measured and Average Values Measured values can be saved with a single touch Easy operation with one hand using the side button is also available Average value can be calculated and saved as well *Equivalent to IP42 when battery cover and USB cover are closed. IP42 means protection against solid objects of 1mm diameter and greater, and vertically falling water drops when enclosure is tilted up to 15 degrees. Wiping off water drops on the measurement spots are necessary in order to obtain accuarte value. Specifications Measurement range  0.0 to 100.0 Display Range　  0.0 to 199.9 [OVER] is displayed for values greater than 100.0  Repeatability¹　 ±0.6 (±0.5% of full scale ±1 digit)² Measurement area  6 × 12 mm ellipse Measurement Geometry  60° Light Source  LED (880 nm) Operating Temperature　  0 to 40°C Relative humidity  35 to 85%RH (no condensation) Environmental Rating  IP42 Power Suppy  AA battery × 2 Dimensions  61 (W) × 62 (D) × 176 (H) mm Weight  320 g or less (including batteries and protective cover) Functions Auto power off (10 minutes) Memory: 100 readings and 200 average data with date and time Data output to PC via USB cable (Batch output of memory data, OS: Windows®10)³ Accessories⁴ Protective cover with integrated calibration tile (3200840869) Soft case (3200829076) Lens cleaning cloth (3200829127) Variation is values when repeated measurement are done continuously in a short   time under the same conditions. Full scale 100.0 Please use a micro USB cable. "Windows" is a registered trademark or trademark of Microsoft Corporation in the  U.S. and other countries. Battery and USB cable are not included. Accessories Protective cover - 3200840869 With integrated calibration tile Soft case - 3200829076 Lens cleaning cloth - 3200829127 Downloads Horiba IG 340 Handy Gloss Checker - Data Sheet Horiba IG 340 Handy Gloss Checker - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/glossmeters-c-102_53/horiba-ig-340-3200820832-handy-gloss-checker-meter-p-1874.html Wed, 29 Mar 2023 17:28:32 +0000 USD 1874 Horiba IG-340 https://www.abqindustrial.net/store/images/Horiba-IG-340-Handy-Gloss-Checker.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cmex5-concrete-moisture-encounter-x5-p-1873.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1873 ]]>Tramex CMEX5 Concrete Moisture Encounter X5 4 Modes of Measurement 8 Simple Membrane Keypad Controls Display Digital The Tramex CMEX5 Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter forconcrete floors and slabs providing instant and precise quantitative measurement of moisture contentusing Gravimetric testing as a baseline. The Tramex CMEX5 Concrete Moisture Encounter X5 also provides Carbide Method equivalent readingsfor concrete and other cementitious substrates as well as comparative readings as per ASTM F2659.Incorporating plug-in ports for the optional Hygro-i2® relative humidity probe testing per ASTM F2170and heavy-duty pin-type wood probes, this moisture meter transforms into the ideal all-in-one instrument for the flooring professional. The CMEX5 concrete moisture meter determines instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. This concrete moisture meter tests the concrete to a depth of approximately 20mm (3⁄4") into the slab. The CMEX5 also provides quantitative Carbide Method equivalent readings for Concrete and Anhydrite/Gypsum substrates and screeds. In addition, the CMEX5 has two reference scales for comparative readings making this moisture meter suitable to perform a concrete moisture test as per ASTM F2659. This top quality concrete moisture meter with its Hygrometer and optional external pin and RH probe functionalities, is the ultimate tool for testing of concrete and flooring for professionals in the concrete coatings, wood flooring or water damage restoration industry to help prevent moisture problems on concrete floors. The use of the CMEX5 can be extended with the optional Concrete Moisture Probe which measures in-situ quantitative moisture content within the concrete to an extendable depth of up to 4" (100mm). Kit Contents The Tramex CMEX5 Concrete Moisture Encounter X5 includes everything needed for testing: Tramex CMEX5 Concrete Moisture Encounter X5​​ Tramex ALLPOUCH5 Single Meter Case​ Free App available for Android and iOS Operating Instructions​ Certificate of Calibration​ One (1) year warranty Features 4 modes of measurement: Non-destructive moisture measurement, ambient hygrometer and optional external in-situ hygrometer and wood pin probe. 8 simple membrane keypad controls. Moisture readings and scale are displayed on a large, clear easy-to-read clear digital display: 2.3" x 1.4" (58mm x 35mm). The built-in Hygrometer probe provides Relative Humidity (RH) readings, temperature, dew point temperature and Humidity Ratio. Wood pin probe mode is automatically selected when the probe is plugged into the Concrete Moisture Encounter X5. When the external Relative Humidity (RH) Hygro-i2 probe is connected to the Concrete Moisture Encounter X5, the instrument automatically switches to RH mode. Ambient or In-Situ Relative Humidity readings, probe temperature, dew point temperature and Humidity Ratio are automatically displayed (Hygrometer Mode). When the battery requires replacement a LOW BATTERY icon is shown on the display. Specifications Moisture content for Concrete 0 → 6.9 % Comparative for Gypsum floor screed 0 → 12 CM Equiv Anhydrite/Concrete 0→2.7 / 0→ 4.3 Reference scale 0 → 100 Relative Humidity 0 → 99%(with optional Hygro-i2 ® probe) Humidity accuracy 0% → 99%RH +/- 2% @ 25°C / 77°F Moisture content for wood 5→ 30 %(with optional wood pin probes) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Digital Depth of penetration in concrete approx. ¾" (20mm) More Info The Determinator is also available as part of the following kits: TheTramex CDK Concrete Determinator Moisture Probe, which includes the CMEX5 Concrete Moisture Meter for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. The Tramex CDTK Concrete Determinator Tech Kit is the complete kit for instant and precise testing of both Surface and In-Body Concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. It includes the CMEX5 digital concrete moisture meter, the reusable Concrete Moisture Probe, a reusable plug-in Hygro-i2 ® RH probe for in-situ testing of concrete as per ASTM F2170, an infrared surface thermometer for surface temperature and dew point conditions when used in conjunction with the CMEX5 hygrometer and the CMEX5 extension handle. Moisture Mapping & Data Documentation Concrete moisture test results can be visualized with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos. Measurements Modes Non-destructive test (NDT) mode: The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and anhydrite/gypsum substrates and screeds, as well as comparative readings as per ASTM F2659. Hygrometer mode:The Tramex Concrete Moisture Encounter X5's built-in Ambient Relative Humidity Sensor measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment. Equilibrium Relative Humidity mode (optional plug-in probe): Using the optional plug-in Hygro-i2 RH probes, the CMEX5 concrete moisture meter will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces. PIN Meter mode (optional plug-in probe): The Tramex CMEX5 concrete moisture meter becomes a resistance type meter and measures the percentage moisture content (%MC) of wood when used with the optional plug-in PIN meter. International wood standards or pre-programmed wood species can be selected. PIN meter mode can also be used for Drywall and WME (Wood Moisture Equivalent) readings for other building materials. Concrete Moisture Meter Design Tramex Concrete Moisture Encounter X5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Concrete Moisture Encounter X5 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial. Related Products Tramex WDIK Water Damage Restoration Inspector Kit Industry: Water Damage Restoration Tramex WDMK Water Damage Restoration Master Kit Industry: Water Damage Restoration Tramex RIK Roofing Inspector Kit Non-destructive checking of moisture conditions in roofing Tramex RMK Roof Master Kit Non-destructive checking of moisture conditions in roofing Tramex CCIK Concrete Coatings Inspector Kit Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration Tramex FIK Flooring Inspector Kit Industry: Flooring Inspection, Flooring Installation. Tramex FMK Flooring Master Kit Industry: Flooring Inspection, Flooring Installation. Tramex Hygro-i2 Relative Humidity Probe Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use withMRH3 Order Code: HH14SP200B For use withCMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use withMRH3 Order Code: HH14SP90 For use withCMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Downloads Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cmex5-concrete-moisture-encounter-x5-p-1873.html Wed, 16 Aug 2023 01:45:57 +0000 USD 1873 Tramex 953 CMEX5 https://www.abqindustrial.net/store/images/Tramex-CMEX5-Concrete-Moisture-Encounter-X5.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mark-10-cap-tstm-dc-motorized-cap-torque-test-system-p-1872.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1872 ]]>Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests Optional Digital Angle Indicator The Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System is designed to measure open and closure torque measurements on caps, lids, valves and more. Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests. Versatile modular design allows the stand to be configured with a variety of gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The Mark-10 TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features. Complete system includes the Motorized Test Stand, Test Stand Controller, M5I Torque Indicator, R50 Torque Sensor, AC1029 Axial Compensator, G1058 Cap Grip and G1023 Container Grip Container Size Limits Cap Diameter: 0.2-3.5" (5.1-89.0 mm) Container Diameter: 0-4.8" (0-122mm) Container Height: 0-9" (0-225mm) *Optional Fixtures and Column Extension are available to accommodate larger containers, inquire. Kit Contents The Mark-10 CAP-TSTM-DC Motorized Cap Torque Test System is sold as a complete test system that includes the following items: TSTM-DC - Motorized Torque Test Stand with Digital Controller Series-5i - Torque Display R50 - Torque Sensor G1058 - Cap Grip AC1029 - Axial Displacement Compensator G1023 - Base Grip 09-1162 - Torque Display to Test Stand Communication Cable 09-1163 - RS232 Serial Output Cable Features  Includes NIST-Traceable Calibration Certificate Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests No speed variation with load Digital Angle Indication Programmable angle limits Overload Protection Auto-return Independent CW and CCW Speeds Specifications Speed Range 0.01 - 15 RPM [0.05 - 90°/s] Speed Accuracy ±0.2% of setting, ±0% variation with load Throat 4.10" (104 mm) Maximum Cap Diameter 3.5" / 89mm Manual Adjustment 12º/knob rev Maximum Silder Travel 15.5" (394 mm) Slider Travel Rate 1.047" (26.6 mm) / level rev Complete System Complete system includes the Motorized Test Stand, Test Stand Controller, M5I Torque Indicator, R50 Torque Sensor, AC1029 Axial Compensator, G1058 Cap Grip and G1023 Container Grip Force Ranges Model Capacity Resolution CAP-TSTM-DC-50z 50 ozin 36 kgFmm 35 Ncm 0.02 ozin 0.02 kgFmm 0.02 Ncm CAP-TSTM-DC-12i 12 lbin 140 kgFmm 135 Ncm 0.005 lbin 0.1 kgFmm 0.1 Ncm CAP-TSTM-DC-50i 50 lbin 580 kgFmm 570 Ncm 0.02 lbin 0.5kgFmm 0.5 Ncm CAP-TSTM-DC-100i 100 lbin 1150 kgFmm 1150 Ncm 0.05 lbin 05 kgFmm 0.5 Ncm Related Products MTS-RA Motorized Cap Torque Tester Motorized Cap Torque Tester Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-testers-c-101_20/mark-10-cap-tstm-dc-motorized-cap-torque-test-system-p-1872.html Thu, 13 Oct 2022 17:48:01 +0000 USD 1872 Mark-10 1000 CAP-TSTM-DC https://www.abqindustrial.net/store/images/Mark-10-CAP-TSTM-DC-Motorized-Cap-Torque-Test.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-prbbhi-probe-only-barcol-hardness-impressor-p-1871.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1871 ]]>DeFelsko PosiTector PRBBHI Barcol Hardness Impressor - Probe Only Display Sold Separately The DeFelsko PosiTector BHI Barcol Hardness Impressor measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic Conforms to ASTM B648/D2583, DIN EN 59 and AS/NZS 3572.22 PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Accessories Test Disks For verifying the operation of Barcol hardness impressors. Choose from hard or soft aluminum alloys. Replacement Glass Plate For zeroing worn or replaced indentors on the PosiTector BHI. Replacement Indentors Spare indentor tips (2pk) for PosiTector BHI. Includes additional indentor with replacement tool. Downloads DeFelsko PosiTector BHI Barcol Hardness Impressor - Instruction Manual DeFelsko PosiTector BHI Barcol Hardness Impressor - Literature DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-prbbhi-probe-only-barcol-hardness-impressor-p-1871.html Tue, 20 Jun 2023 16:52:21 +0000 USD 1871 DeFelsko 997 PRBBHI https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-PRBBHI-Barcol-Hardness-Impressor.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-bhi1-standard-barcol-hardness-impressor-p-1870.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1870 ]]>DeFelsko PosiTector BHI Standard Barcol Hardness Impressor Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester Lightweight, portable device can be used in any orientation The DeFelsko PosiTector BHI Barcol Hardness Impressor measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester Lightweight, portable device can be used in any orientation PosiTector interchangeable platform – attach any PosiTector probe to a single gage body USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NIST included (Long Form) Conforms to ASTM B648/D2583, DIN EN 59 and AS/NZS 3572.22 Kit Contents The DeFelsko PosiTector BHI1 Standard Barcol Hardness Impressor Kit includes everything needed for testing PosiTector Advanced Gage Body BDYSTD-G PosiTector BHI Probe PRBBHI Two (2) Test Disks Leveling Plate and Glass Plate Replacement Indentor with Replacement Tool Protective rubber holster with belt clip Wrist Strap and Protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard Shell Case and Instructions Two (2) Year Warranty Features  Simple Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester User-adjustable measurement time with onscreen countdown Includes spare, field replaceable indentor with replacement tool Lightweight, portable device can be used in any orientation RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Shock-absorbing, protective rubber holster with belt clip Hard-shell carrying case included Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration included Hi-RES mode increases displayed resolution for use on applications that require greater precision Includes hard and soft aluminum alloy test disks and leveling plate to verify gage operation Conforms to national and international standards including ASTM Versatile PosiTector body accepts all PosiTector BHI, SHD, 6000, 200, DPM, IRT, RTR, SPG, SST, and UTG probes easily converting from a hardness tester to a coating thickness gage, dew point meter, infrared thermometer, surface profile gage, soluble salt tester, or ultrasonic wall thickness gage 1 and 2 point calibration options with Cal Reset to restore factory settings Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Uses alkaline or rechargeable batteries (built-in charger) Powerful Continually displays/updates average, standard deviation, min/max hardness and number of readings while measuring Screen Capture - save screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits Sealed USB Port for fast, simple connection to a PC and to supply continuous power PosiSoft USB Drive - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Software Solutions for viewing, analyzing and reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown: Storage of 1000 readings per probe - stored readings can be viewed or downloaded Specifications Measurement Range 20 - 100 Barcol Resolution 0.1 Barcol Accuracy ± 2 Barcol Gauge Body Size 137 x 61 x 28 mm (5.4" x 2.4" x 1.1") Gauge Body Weight 140 g (4.9 oz) without batteries Probe Size 145 x 97 x 64 mm (5.7" x 3.8" x 2.5") Probe Headroom 140 mm (5.5") Probe Weight 400 g ( 14.1 oz) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Accessories Test Disks For verifying the operation of Barcol hardness impressors. Choose from hard or soft aluminum alloys. Replacement Glass Plate For zeroing worn or replaced indentors on the PosiTector BHI. Replacement Indentors Spare indentor tips (2pk) for PosiTector BHI. Includes additional indentor with replacement tool. Downloads DeFelsko PosiTector BHI Barcol Hardness Impressor - Instruction Manual DeFelsko PosiTector BHI Barcol Hardness Impressor - Literature DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-bhi1-standard-barcol-hardness-impressor-p-1870.html Tue, 20 Jun 2023 16:51:18 +0000 USD 1870 DeFelsko 988 BHI1 https://www.abqindustrial.net/store/images/defelsko-positector-bhi-std.jpeg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ftrs3-g-positector-6000-ftrs3-advanced-ferrous-coating-thickness-gage-p-1869.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1869 ]]>DeFelsko FTRS3-G PosiTector 6000 FTRS3 Advanced Ferrous Coating Thickness Gage with right angle cabled probe for general purpose paint and coating applications Model: FTRS3-G with Advanced Body Range: 0 - 250 mils (0 - 6000 µm) The DeFelsko FTRS3-G PosiTector 6000 FTRS3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector 6000 FTRS3 features a right angle probe for measuring within areas of low headroom. This stainless steel probe is ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko PosiTector 6000 FTRS3 Advanced Ferrous Coating Thickness Gage for general purpose applications features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FTRS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFTRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple NEW Faster measurement speed - 60+ readings per minute Ready to measure - no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for use on applications that require greater precision Conforms to national and international standards including ISO and ASTM Versatile Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Uses alkaline or rechargeable batteries (built-in charger) Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Enhanced FAST mode - 90+ readings per minute for quick inspection Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture – record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe NEW Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning NEW Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. Multiple stored calibration adjustments for measuring on a variety of substrate conditions SSPC-PA 2 feature determines if film thickness over a large area conforms to user-specified min/max levels PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings Onscreen Batch Annotation-add notes, change batch names and more with built-in QWERTY keyboard WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 250 mils 0 - 6 mm 0 - 6000 μ *Accuracy: ± (0.5 mils + 1%) 0 - 100 mils ± (0.5 mil + 3%) > 100 mils ± (0.01 mm + 1%) 0 - 2.5 mm ± (0.01 mm + 3%) > 2.5 mm PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FTRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ftrs3-g-positector-6000-ftrs3-advanced-ferrous-coating-thickness-gage-p-1869.html Fri, 21 Oct 2022 13:33:45 +0000 USD 1869 DeFelsko 1000 FTRS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-ftrs-3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ftrs1-g-positector-6000-ftrs1-standard-ferrous-coating-thickness-gage-p-1868.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1868 ]]>DeFelsko FTRS1-G PosiTector 6000 FTRS1 Standard Ferrous Coating Thickness Gage with right angle cabled probe for general purpose paint and coating applications Model: FTRS1-G with Standard Body Range: 0 - 250 mils (0 - 6000 µm) The DeFelsko FTRS1-G PosiTector 6000 FTRS1 Standard Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector 6000 FTRS1 features a right angle probe for measuring within areas of low headroom. This stainless steel probe is ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko PosiTector 6000 FTRS1 Standard Ferrous Coating Thickness Gagefeatures a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FTRS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFTRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 250 mils 0 - 6 mm 0 - 6000 μ *Accuracy: ± (0.5 mils + 1%) 0 - 100 mils ± (0.5 mil + 3%) > 100 mils ± (0.01 mm + 1%) 0 - 2.5 mm ± (0.01 mm + 3%) > 2.5 mm PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FTRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ftrs1-g-positector-6000-ftrs1-standard-ferrous-coating-thickness-gage-p-1868.html Tue, 18 Oct 2022 14:20:02 +0000 USD 1868 DeFelsko 999 FTRS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-ftrs-1-g-coating-thickness.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-temperature-c-107_135_150/wagner-meter-smart-logger-bluetooth-temperature-and-humidity-data-logger-p-1867.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1867 ]]>Wagner Meter Smart Logger Bluetooth Temperature and Humidity Data Logger ASTM F2659 compliant Digital display Measures to 0.5-inch depth The Wagner Meter Smart Logger is a discrete Bluetooth temperature and humidity data logger. Captures, records, and sends up to 12,000 readings or 300 days of ambient temperature and relative humidity data. Description The Smart Logger™ is a small, lightweight, easily portable and highly accurate monitoring device that tracks ambient temperature and humidity conditions when flooring professionals are away from the job site. It can also be utilized during the wood flooring acclimation process and the storage of wood flooring. The Smart Logger is capable of storing up to 12,000 pieces of data over a period of up to 300 days. The Smart Logger monitor incorporates the latest Bluetooth® technology and works in tandem with the Smart Logger app, which can be downloaded for free at the Apple Store or Google Play. The app connects the Smart Logger monitor through a mobile device’s Bluetooth (Android or iOS devices), enabling users to transmit and record data, and even send reports via email. Specifications Item Weight 1 ounce (30g) Product Dimensions 2 in. (50mm) 2 in. (50mm) 0.8 in (20mm) Material ABS, PCB, FR4 Shape Square Power Source Battery Powered Output Power -4 dBm, adjustable Batteries Included Yes Batteries Required Yes Battery Cell Type Lithium Battery Description CR2450 3V 550mAh Shipping Weight 1 lb (.45 kg) Downloads Wagner Smart Logger Bluetooth Temperature and Humidity Data Logger - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-temperature-c-107_135_150/wagner-meter-smart-logger-bluetooth-temperature-and-humidity-data-logger-p-1867.html Wed, 20 Oct 2021 03:23:18 +0000 USD 1867 Wagner Meters 987 Smart-Logger https://www.abqindustrial.net/store/images/Smart-Logger-Bluetooth-Temperature-Humidity-Data-Logger.jpg Wagner Meter Smart Logger Bluetooth Temperature and Humidity Data Logger

---

ASTM F2659 compliant

---

Digital display

---

Measures to 0.5-inch depth

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/wagner-c555-handheld-concrete-moisture-meter-kit-p-1866.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1866 ]]>Wagner C555 Handheld Concrete Moisture Meter Kit ASTM F2659 compliant Digital display Measures to 0.5-inch depth The Wagner C555 Concrete Moisture Meter provides fast, non-destructive preliminary moisture measurements on smooth, firm concrete to help pinpoint problem areas and determine where to place Rapid RH® L6 Smart Sensors. With its built-in ambient sensors and included On-Demand Calibrator, the C555 comes with everything you need to perform the test as outlined in ASTM F2659. Kit Contents C555 Concrete Moisture Meter Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Instruction Manual Description The C555 Concrete Moisture Meter provides fast, non-destructive preliminary moisture measurements on smooth, firm concrete to help pinpoint problem areas and determine where to place Rapid RH® L6 Smart Sensors. Built-in sensors measure ambient temperature and relative humidity. On-Demand Calibrator allows fast, easy user-calibration. With its built-in ambient sensors and On-Demand Calibrator, the C555 comes with everything you need to perform the test outlined in ASTM F2659. Relative mode can be used on other materials such as concrete block. Features ASTM F2659 compliant Digital display Measures to 0.5-inch depth Integrated ambient temperature and RH sensors Moisture scale reads from 0% to 6.9% Audio threshold alarm Relative mode can be used on other concrete-similar materials such as concrete block Scuff-resistant Teflon sensor pad Downloads Wagner C555 Handheld Concrete Moisture Meter Kit - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/wagner-c555-handheld-concrete-moisture-meter-kit-p-1866.html Sun, 14 Nov 2021 13:42:19 +0000 USD 1866 Wagner Meters 985 C555 https://www.abqindustrial.net/store/images/Wagner-C555-Handheld-Concrete-Moisture-Meter.jpg Wagner C555 Handheld Concrete Moisture Meter Kit

---

ASTM F2659 compliant

---

Digital display

---

Measures to 0.5-inch depth

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-950-smart-pinless-wood-moisture-meter-kit-p-1865.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1865 ]]>Wagner Orion 950 Smart Pinless Wood Moisture Meter Kit Ranges for wood: 4.0% to 32.0% Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C) The Wagner Orion® 950 Smart Pinless Wood Moisture Meter Kit is the all-in-one solution for busy professionals desiring superior accuracy and multi-tool functionality. The Wagner Orion 950 features an on-board Equilibrium Moisture Content (EMC) calculator, Bluetooth connectivity to free smart device apps, built-in temperature/RH sensor, and more. Kit Contents Orion 950 Wood Moisture Meter with Built-in Temperature/RH Sensor Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Species Settings Booklet Instruction Manual Common Flooring Materials Settings Reference Card Seven (7) Year Warranty Description The Wagner Orion 950 Smart Pinless Wood Moisture Meter Kit features the Wagner Orion 950, carrying the Wagner tradition of superior accuracy forward with all of the features of the 910, 920, 930, and 940 meters and adding more. A flexible rubber boot makes the 950 durable enough to withstand your toughest jobs. The Wagner Orion 950 Moisture Meter joins the rest of the Orion line of meters in being the first in the industry to provide true in-the-field calibration capability with the included On-Demand Calibrator. Calibrate your Orion 950 at your location in about 30 seconds whenever you want The Orion line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty. Features Bluetooth® App Enabled- The Orion 950 interacts through Bluetooth technology with free mobile apps for your Android or Apple smart device. The app is available on either Google Play or iTunes. You can receive and record data, set specifications for separate jobs, and much more To send readings data from the Orion 950 to the FloorSmart™ or Woodshop MC app on your smart device, follow these steps: Ensure that Bluetooth has been enabled on your smart device. The Orion 950 will automatically pair with your smart device when the power is on and the two devices are within Bluetooth range. Ensure that the DATA mode on the 950 is ON. Consult your Orion 950 manual for instructions. Open the FloorSmart or Woodshop MC app and enter a new job description or choose a current job to edit. Press the “Record” tab at the bottom left to access the “Record Readings” screen. Press the “Record” button at the top right to enable the app to record data from the Orion 950. Scan the target area with the Orion 950 and press the “ON/HOLD” button when you want to send a reading to the FloorSmart or Woodshop MC app. Temperature and Humidity Sensor - Get the ambient temperature and relative humidity (RH) measurements of any room the Orion 950 is in with its built-in sensor. It’s like having an ambient conditions data logger and a moisture meter all in one. Dew Point Calculations - The Orion 950 will calculate the dew point of the environment for you. Utilizing the built-in temperature and humidity sensor, the Orion 950 will calculate and display the current dew point whenever and wherever you need. Equilibrium Moisture Content - The Orion 950 will also calculate if a wood specimen is at the critical threshold where it has reached its equilibrium with the environment and will no longer gain or lose moisture. The equilibrium moisture content (EMC) will tell you when your wood floor or wood projects are ready for installation or fabrication. Grains Per Pound/Kilogram Mode - Grains per pound/kilogram (GPP/GPK) is a more precise measurement to know the exact weight of water vapor that is in the surrounding air. The Orion 950 will calculate and display instantly the grains per pound/kilogram, also known as the specific humidity of the air, compared to relative humidity Specifications Length 5.75 inches (146mm) Width 3.0 inches (76mm) Thickness 1.0 inches (25mm) Weight with Boot 7.2 oz. (204g) Scanning Area 2.0 inches (50mm) x 2.5 inches (63mm) Power 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) Auto Power Shut - Down 60 seconds Ambient Temperature 32˚F to +110˚F (0˚C to +43˚C) Ambient Relative Humidity 0% to 100% Equilibrium Moisture Content Measurement 0 - 40.7% Dew Point -85˚F to +110˚F (-65˚C to +43˚C) Absolute Humidity 0 to 431.1 lb/ft (0 to 61.6 kg/m) Specific Gravity Range for Wood Species 0.20-1.0 SG Storage Temperature and Humidity +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing Operating Temperature Range +32˚F to +110˚F (+0˚C to +43˚C) Downloads Wagner Orion 950 Data Collection Pinless Wood Moisture Meter Kit - Instruction Manual Wagner Orion Wood Moisture Meters - Settings Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-950-smart-pinless-wood-moisture-meter-kit-p-1865.html Sun, 14 Nov 2021 13:40:52 +0000 USD 1865 Wagner Meters 927 Orion-950 https://www.abqindustrial.net/store/images/Wagner-Orion-950-Smart-Pinless-Wood-Moisture-Meter-Kit.jpg Wagner Orion 950 Smart Pinless Wood Moisture Meter Kit

---

Ranges for wood: 4.0% to 32.0%

---

Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C)

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-940-data-collection-pinless-wood-moisture-meter-kit-p-1864.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1864 ]]>Wagner Orion 940 Data Collection Pinless Wood Moisture Meter Kit Ranges for wood: 4.0% to 32.0% Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C) The Wagner Orion® 940 Data Collection Pinless Wood Moisture Meter Kit features the Orion 940 meter, designed for measurement of moisture content from the surface down to .25” (6.4mm) or .75” (19mm) deep inside wood or other materials. The Wagner Orion 940 Moisture Meter also features data collection and storage capabilities vital to Quality Control and home or property restoration applications. Kit Contents Orion 940 Wood Moisture Meter Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Species Settings Booklet Instruction Manual Common Flooring Materials Settings Reference Card Seven (7) Year Warranty Description The Wagner Orion 940 Data Collection Pinless Wood Moisture Meter Kit features the Wagner Orion 940, carrying the Wagner tradition of superior accuracy forward with the added versatility of dual depth measurement and data collection. The Orion 940 can collect data in two modes, either manual or automatic, with viewable moisture stats. The Orion 940 can store up to 100 readings and includes high-low-average analysis. A flexible rubber boot makes the 940 durable enough to withstand your toughest jobs. The Wagner Orion 940 Moisture Meter joins the rest of the Orion line of meters in being the first in the industry to provide true in-the-field calibration capability with the included On-Demand Calibrator. Calibrate your Orion 940 at your location in about 30 seconds whenever you want. The Orion line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty. Features Data Collection - The Orion 940 can collect data in two modes…either manual or automatic with viewable moisture stats. The Orion 940 can store up to 100 readings and includes high-low-average analysis. Dual Depth Measurements - The 940 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth in the shallow scan mode or from the surface down to .75”(19mm) in the deep scan mode. IntelliSense™ Technology - Orion 910, 930, 940, and 950 pinless wood moisture meters incorporate IntelliSense™ technology in their ¾” (19mm) deep reading modes. This enables accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture will have on the meter readings. Pin-type meters may be able to bypass the surface conditions, but they also damage the surface of the wood every time you take a reading. Fast Selection Species Settings - With simple up/down arrow buttons, your Orion 940 meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 940 can also be configured to measure some non-solid wood products such as plywood, OSB, or MDF. Orion meters also have species settings for many bamboo flooring products. Non-Damaging Pinless Sensor - Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters. Virtually Unaffected by Temperature - Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood. True In-The-Field Calibration - There is no need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased. Relative Moisture Measurement Mode - A relative moisture measurement mode allows for taking relative moisture measurements in non-wood based materials and engineered wood flooring. This means you can use an Orion moisture meter to obtain relative moisture conditions on a number of non-wood building materials and flooring products. Press to Hold Readings - On every Orion moisture meter, if you press down once on the ON/HOLD button it will hold the moisture reading you took. This is quite useful if you’re measuring in a hard to reach area. Programmable Alarm - The Orion 940 includes a user-programmable, audible alarm for high moisture content levels. 7-Year Warranty - Wagner Meters is proud to include the Orion line of pinless moisture meters within our Genuine Wagner 7-Year Warranty program. The longest-lasting warranty in the industry. Specifications Length 5.75 inches (146mm) Width 3.0 inches (76mm) Thickness 1.0 inches (25mm) Weight with Boot 7.2 oz. (204g) Scanning Area 2.0 inches (50mm) x 2.5 inches (63mm) Power 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) Auto Power Shut - Down 60 seconds Measurement Ranges for wood 4.0% to 32.0% (range will vary slightly depending on species setting) Relative Measurement Scale 0-100 Specific Gravity Range for Wood Species 0.20-1.0 SG Storage Temperature and Humidity +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing Operating Temperature Range +32˚F to +110˚F (+0˚C to +43˚C) Downloads Wagner Orion 940 Data Collection Pinless Wood Moisture Meter Kit - Instruction Manual Wagner Orion Wood Moisture Meters - Settings Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-940-data-collection-pinless-wood-moisture-meter-kit-p-1864.html Sun, 14 Nov 2021 13:40:51 +0000 USD 1864 Wagner Meters 996 Orion-940 https://www.abqindustrial.net/store/images/Wagner-Orion-940-Data-Collection-Wood-Moisture-Meter-Kit.jpg Wagner Orion 940 Data Collection Pinless Wood Moisture Meter Kit

---

Ranges for wood: 4.0% to 32.0%

---

Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C)

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-930-dual-depth-pinless-wood-moisture-meter-kit-p-1863.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1863 ]]>Wagner Orion 930 Dual Depth Pinless Wood Moisture Meter Kit Ranges for wood: 4.0% to 32.0% Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C) The Wagner Orion® 930 Dual Depth Pinless Wood Moisture Meter Kit features the Orion 930 meter, designed for measurement of moisture content from the surface down to .25” (6.4mm) or .75” (19mm) deep inside wood or other material. The Wagner Orion 930 Dual Depth Moisture Meter features the versatility that is needed for flooring, quality control, woodworking, and inspection applications. Kit Contents Orion 930 Wood Moisture Meter Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Species Settings Booklet Instruction Manual Common Flooring Materials Settings Reference Card Seven (7) Year Warranty Description The Wagner Orion 930 Dual Depth Pinless Wood Moisture Meter Kit features the Wagner Orion 930, carrying the Wagner tradition of superior accuracy forward with the added versatility of dual depth measurement in wood or other materials. The 930 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth in the shallow mode or from the surface down to .75” (19mm) in the deep scan mode. A flexible rubber boot makes the 930 durable enough to withstand your toughest jobs. The Wagner Orion 930 Moisture Meter joins the rest of the Orion line of meters in being the first in the industry to provide true in-the-field calibration capability with the included On-Demand Calibrator. Calibrate your Orion 930 at your location in about 30 seconds whenever you want The Orion line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty. Features Dual Depth Measurements - The 930 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth in the shallow scan mode or from the surface down to .75” (19mm) in the deep scan mode. IntelliSense™ Technology - Orion 910, 930, 940, and 950 pinless wood moisture meters incorporate IntelliSense™ technology in their ¾” (19mm) deep reading modes. This enables accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture will have on the meter readings. Pin-type meters may be able to bypass the surface conditions, but they also damage the surface of the wood every time you take a reading. Fast Selection Species Settings - With simple up/down arrow buttons, your Orion 930 meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 930 can also be configured to measure some non-solid wood products such as plywood, OSB, or MDF. Orion meters also have species settings for many bamboo flooring products. Non-Damaging Pinless Sensor - Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters. Virtually Unaffected by Temperature - Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood. True In-The-Field Calibration - No need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased. Relative Moisture Measurement Mode - A relative moisture measurement mode allows for taking relative moisture measurements in non-wood based materials and engineered wood flooring. This means you can use an Orion moisture meter to obtain relative moisture conditions on a number of non-wood building materials and flooring products. Press to Hold Readings - On every Orion moisture meter, if you press down once on the ON/HOLD button it will hold the moisture reading you took. This is quite useful if you’re measuring in a hard to reach area. Programmable Alarm - The Orion 930 includes a user-programmable, audible alarm for high moisture content levels. 7-Year Warranty - Wagner Meters is proud to include the Orion line of pinless moisture meters within our Genuine Wagner 7-Year Warranty program. The longest-lasting warranty in the industry. Specifications Length 5.75 inches (146mm) Width 3.0 inches (76mm) Thickness 1.0 inches (25mm) Weight with Boot 7.2 oz. (204g) Scanning Area 2.0 inches (50mm) x 2.5 inches (63mm) Power 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) Auto Power Shut - Down 60 seconds Measurement Ranges for wood 4.0% to 32.0% (range will vary slightly depending on species setting) Relative Measurement Scale 0-100 Specific Gravity Range for Wood Species 0.20-1.0 SG Storage Temperature and Humidity +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing Operating Temperature Range +32˚F to +110˚F (+0˚C to +43˚C) Downloads Wagner Orion 930 Dual Depth Pinless Wood Moisture Meter Kit - Instruction Manual Wagner Orion Wood Moisture Meters - Settings Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-930-dual-depth-pinless-wood-moisture-meter-kit-p-1863.html Sun, 14 Nov 2021 13:40:50 +0000 USD 1863 Wagner Meters 953 Orion-930 https://www.abqindustrial.net/store/images/Wagner-Orion-930-Dual-Depth-Pinless-Wood-Moisture-Meter-Kit.jpg Wagner Orion 930 Dual Depth Pinless Wood Moisture Meter Kit

---

Ranges for wood: 4.0% to 32.0%

---

Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C)

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-920-shallow-depth-pinless-wood-moisture-meter-kit-p-1862.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1862 ]]>Wagner Orion 920 Shallow Depth Pinless Wood Moisture Meter Kit Ranges for wood: 4.0% to 32.0% Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C) The Wagner Orion® 920 Shallow Depth Pinless Wood Moisture Meter Kit features the Orion 920 meter designed exclusively for shallow measurement of moisture content from the surface down to .25” (6.4mm) deep inside wood or other material. The Wagner Orion 920 Shallow Depth Pinless Wood Moisture Meter Kit is ideal for applications where accurate moisture readings from thin wood pieces or coatings are critical to success. Kit Contents Orion 920 Wood Moisture Meter Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Species Settings Booklet Instruction Manual Common Flooring Materials Settings Reference Card Seven (7) Year Warranty Description The Wagner Orion 920 Shallow Depth Pinless Wood Moisture Meter Kit features the Wagner Orion 920, carrying the Wagner tradition of superior accuracy forward with added capabilities and usefulness. The 920 takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth. A flexible rubber boot makes the 920 durable enough to withstand your toughest jobs. The Wagner Orion 920 Moisture Meter joins the rest of the Orion line of meters in being the first in the industry to provide true in-the-field calibration capability with the included On-Demand Calibrator. Calibrate your Orion 920 at your location in about 30 seconds whenever you want. The Orion line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty. Features Shallow Depth Measurements - The Orion 920 Shallow Depth Pinless Moisture Meter takes moisture readings in your wood from the surface down to .25” (6.4mm) in depth. Fast Selection Species Settings - With simple up/down arrow buttons, your Orion 920 meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 920 can also be configured to measure some non-solid wood products such as plywood, OSB, or MDF. Orion meters also have species settings for many bamboo flooring products. Non-Damaging Pinless Sensor - Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters. Virtually Unaffected by Temperature - Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood. True In-The-Field Calibration - There is no need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased. Relative Moisture Measurement Mode - A relative moisture measurement mode allows for taking relative moisture measurements in non-wood based materials and engineered wood flooring. This means you can use an Orion moisture meter to obtain relative moisture conditions on a number of non-wood building materials and flooring products. Press to Hold Readings - On every Orion moisture meter, if you press down once on the ON/HOLD button it will hold the moisture reading you took. This is quite useful if you’re measuring in a hard to reach area. Programmable Alarm - The Orion 920 includes a user-programmable, audible alarm for high moisture content levels. 7-Year Warranty - Wagner Meters is proud to include the Orion line of pinless moisture meters within our Genuine Wagner 7-Year Warranty program. The longest-lasting warranty in the industry Specifications Length 5.75 inches (146mm) Width 3.0 inches (76mm) Thickness 1.0 inches (25mm) Weight with Boot 7.2 oz. (204g) Scanning Area 2.0 inches (50mm) x 2.5 inches (63mm) Power 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) Auto Power Shut - Down 60 seconds Measurement Ranges for wood 4.0% to 32.0% (range will vary slightly depending on species setting) Relative Measurement Scale 0-100 Specific Gravity Range for Wood Species 0.20-1.0 SG Storage Temperature and Humidity +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing Operating Temperature Range +32˚F to +110˚F (+0˚C to +43˚C) Downloads Wagner Orion 920 Shallow Depth Pinless Wood Moisture Meter Kit - Instruction Manual Wagner Orion Wood Moisture Meters - Settings Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-920-shallow-depth-pinless-wood-moisture-meter-kit-p-1862.html Sun, 14 Nov 2021 13:40:46 +0000 USD 1862 Wagner Meters 1000 Orion-920 https://www.abqindustrial.net/store/images/Wagner-Orion-920-Shallow-Depth-Wood-Moisture-Meter-Kit.jpg Wagner Orion 920 Shallow Depth Pinless Wood Moisture Meter Kit

---

Ranges for wood: 4.0% to 32.0%

---

Operating Temperature Range: +32˚F to +110˚F (+0˚C to +43˚C)

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-910-deep-depth-pinless-wood-moisture-meter-kit-p-1861.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1861 ]]>Wagner Orion 910 Deep Depth Pinless Wood Moisture Meter Kit Ranges for wood: 4.0% to 32.0% Storage Temperature and Humidity: +32˚F to +110˚F (+0˚C to +43˚C) The Wagner Orion® 910 Deep Depth Pinless Wood Moisture Meter Kit continues the Wagner tradition of superior accuracy and adds incredible new functionality. The new Wagner Orion 910 meter incorporates IntelliSense™ technology, a more rugged design, and industry - exclusive true in-the-field calibration capability provided by the included On-Demand Calibrator. Kit Contents Orion 910 Wood Moisture Meter Paired On-Demand Calibrator Rubber Protective Boot Foam-lined ABS Plastic Carrying Case 9V Battery Species Settings Booklet Instruction Manual Common Flooring Materials Settings Reference Card Seven (7) Year Warranty Description The Wagner Orion 910 Deep Depth Pinless Wood Moisture Meter Kit features the Wagner Orion 910, which is designed to build upon the capabilities of the popular Wagner MMC220 meter it replaces. The Orion 910 takes moisture readings in your wood or other material from the surface down to .75” (19mm) in depth. A flexible rubber boot makes the 910 durable enough to withstand your toughest jobs. The Wagner Orion 910 moisture meter joins the rest of the Orion line of meters in being the first in the industry to provide true in-the-field calibration capability with the included On-Demand Calibrator. Calibrate your Orion 910 at your location in about 30 seconds whenever you want. The Orion line of wood moisture meters continues Wagner’s 50-plus year tradition of providing accurate, dependable non-damaging pinless moisture measurement technology, measuring IN the wood not just ON the wood, and backed by Wagner’s industry-leading 7-year warranty. Features Deep Depth Measurements - The Orion 910 Deep Depth Pinless Moisture Meter takes moisture readings in your wood or other material from the surface down to .75” (19mm) in depth. IntelliSense™ Technology - Orion 910, 930, 940, and 950 pinless wood moisture meters incorporate IntelliSense technology in their ¾” (19mm) deep reading modes. This enables accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture will have on the meter readings. Pin-type meters may be able to bypass the surface conditions, but they also damage the surface of the wood every time you take a reading. Fast Selection Species Settings - With simple up/down arrow buttons, your Orion meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 910 can also be configured to measure some non-solid wood products such as plywood, OSB, or MDF. Orion meters also have species settings for many bamboo flooring products. Non-Damaging Pinless Sensor-Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters. Virtually Unaffected by Temperature - Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood. True In-The-Field Calibration - There is no need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased. Relative Moisture Measurement Mode - A relative moisture measurement mode allows for taking relative moisture measurements in non-wood based materials and engineered wood flooring. This means you can use an Orion moisture meter to obtain relative moisture conditions on a number of non-wood building materials and flooring products. Press to Hold Readings - On every Orion moisture meter, if you press down once on the ON/HOLD button it will hold the moisture reading you took. This is quite useful if you’re measuring in a hard to reach area. Programmable Alarm - The Orion includes a user-programmable, audible alarm for high moisture content levels. 7-Year Warranty - Wagner Meters is proud to include the Orion line of pinless moisture meters within our Genuine Wagner 7-Year Warranty program. The longest-lasting warranty in the industry Specifications Length 5.75 inches (146mm) Width 3.0 inches (76mm) Thickness 1.0 inches (25mm) Weight with Boot 7.2 oz. (204g) Scanning Area 2.0 inches (50mm) x 2.5 inches (63mm) Power 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) Auto Power Shut - Down 60 seconds Measurement Ranges for wood 4.0% to 32.0% (range will vary slightly depending on species setting) Relative Measurement Scale 0-100 Specific Gravity Range for Wood Species 0.20-1.0 SG Storage Temperature and Humidity +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing Operating Temperature Range +32˚F to +110˚F (+0˚C to +43˚C) Downloads Wagner Orion 910 Deep Depth Pinless Wood Moisture Meter Kit - Instruction Manual Wagner Orion Wood Moisture Meters - Settings Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/wagner-orion-910-deep-depth-pinless-wood-moisture-meter-kit-p-1861.html Sun, 14 Nov 2021 13:40:44 +0000 USD 1861 Wagner Meters 962 Orion-910 https://www.abqindustrial.net/store/images/Wagner-Orion-910-Deep-Depth-Pinless-Wood-Moisture-Meter-Kit.jpg Wagner Orion 910 Deep Depth Pinless Wood Moisture Meter Kit

---

Ranges for wood: 4.0% to 32.0%

---

Storage Temperature and Humidity: +32˚F to +110˚F (+0˚C to +43˚C)

---

]]> https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-3d-c-108_176/defelsko-prbrtr3d-positector-rtr-replica-tape-reader-probe-only-2d-3d-surface-profile-p-1860.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1860 ]]>DeFelsko PRBRTR3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters Manufacturer: DeFelsko Gage Sold Separately The DeFelsko PosiTector PRBRTR3D Replica Tape Reader probe is used to Measure and Record 2D/3D Surface Profile Parameters. How It Works Click to View DeFelsko PosiTector RTR-H Surface Profile Gage How It Works Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Related Products PosiTector RTR Replica Tape Reader PosiTector RTR Replica Tape Reader - Digital Spring Micrometer Conforms to national and international standards including ISO 8503-5, ASTM D4417 Method C, NACE RP0287 and SSPC-PA17 Downloads DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Instruction Manual DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Literature DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-3d-c-108_176/defelsko-prbrtr3d-positector-rtr-replica-tape-reader-probe-only-2d-3d-surface-profile-p-1860.html Tue, 20 Jun 2023 17:15:23 +0000 USD 1860 DeFelsko 982 PRBRTR3D https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-PRBRTR3D-Replica-Tape-Reader.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-3d-c-108_176/defelsko-rtr3d3-g-positector-rtr-3d3-advanced-replica-tape-reader-2d-3d-surface-profile-p-1859.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1859 ]]>DeFelsko RTR3D3-G Positector RTR 3D Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Download 3D .SDF image files for analysis in included software for Windows and Mac Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape. NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation Create a replica by burnishing tape on a surface and insert into instrument. 3D imagery and 2D/3D parameters are displayed in seconds! Reports common parameters: Ra, Rq, Rz, Rp, ­Rv, Rt, Rpc (2D), and Sa, Sq, Sz, Sp, Sv, and Spd (3D) Ideal for field or laboratory use; flat, curved, or irregular surfaces Download 3D .SDF image files for analysis in included PosiSoft or third party ­­­software Certificate of Calibration showing traceability to PTB (for H and HL only) and NPL (for Ra and Rt) included (Long Form) Conforms to ASME B46, ASTM D4417, ISO 8503-5, NACE SP287, SSPC-PA 17, SSPC-SP5, SP6, SP10, SP11-87T, and others Kit Contents The DeFelsko PosiTector RTR 3D3 Advanced Surface Profile Gage includes everything needed for testing: PosiTector Standard Gage Body BDYADV PosiTector RTR 3D Probe PRBRTR3D One roll of Optical Grade X-Coarse tape and stainless steel burnishing tool Protective rubber holster with belt clip Protective lens shield and replica tape holder Burnishing ball,5 cleaning cards, check shim(s) Microfiber cleaning cloth and surface cleaning putty Wrist strap and protective rubber holster with belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to an accredited national laboratory Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Measures peak height (HL) and common 2D/3D profile parameters such as Ra, Rz, Sq, Spd, and more Ideal for measuring on flat, curved, or irregular surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherpoof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged indoor/outdoor instrument—ideal for field or laboratory use Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration (containing Ra and Rt measurements) showing traceability to an accredited national laboratory included Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector RTR, SPG, 6000, 200, DPM, IRT, SST, SHD, BHI, andUTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Selectable display languages NEW Auto rotating display with Flip Lock Mils/Microns switchable Powerful Calculates and records all fourteen 2D and 3D parameters (below) with each measurement NEW Screen Capture—save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft suite of software for viewing, analyzing & reporting data Apply short and long cutoff filters and discard lengths to optimize the analysis for a specific application Orient the 2D trace between horizontal, vertical, and diagonal (XY, YX) Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches Live graphing of measurement data Download high resolution Surface Data Files (.SDF) for analysis in the included PosiSoft or third-party software Generates two dimensional (2D) and three dimensional (3D) thumbnail images. Ideal for inclusion into reports and confirming consistent blasting results. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring Range (H) 20 – 115 µm 0.8 – 4.5 mils Measuring Range (Rt) 10 – 115 µm 0.4 – 4.5 mils Minimum Roughness (Ra) 2 µm 0.08 mil/80 µin Accuracy (H) + 5 µm + 0.2 mil Accuracy (Rt)* + (5 µm + 5%) + (0.2 mil+ 5%) Accuracy (Ra)* + (0.25 µm + 5%) + (0.01 mil + 5%) Anvil Pressure 1.1 Newtons 110 grams-force Anvil Size Ø6.35 mm Ø0.25 inch Field of View 3.8 x 3.8 mm 0.149 x 0.149 inch Lateral Sampling 3.7 µm 0.145 mil Vertical Resolution 100 nm - 2D/3D 10 nm - SDF 3.93 µin - 2D/3D 0.393 µin - SDF Resolution 0.1 µm 0.01 mil * When measured using Optical Grade X-Coarse Replica Tape How It Works Click to View DeFelsko PosiTector RTR-H Surface Profile Gage How It Works Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Downloads DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Instruction Manual DeFelsko PosiTector RTR 3D Replica Tape Reader to Measure and Record 2D 3D Surface Profile Parameters - Literature DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-3d-c-108_176/defelsko-rtr3d3-g-positector-rtr-3d3-advanced-replica-tape-reader-2d-3d-surface-profile-p-1859.html Tue, 20 Jun 2023 17:14:09 +0000 USD 1859 DeFelsko 1000 RTR-3D3 https://www.abqindustrial.net/store/images/defelsko-positector-rtr3d3-replica-tape-reader.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-h-c-108_175/defelsko-rtrh3-g-positector-rtr-h3-advanced-replica-tape-reader-surface-profile-gage-p-1857.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1857 ]]>DeFelsko RTRH3-G PosiTector RTR H3 Advanced Replica Tape Reader / Surface Profile Gage Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Ready to measure - no calibration adjustment required for most applications Electronic Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape—producing a more accurate peak-to-valley height measurement. Ready to measure—no calibration adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure PosiTector interchangeable platform—attach any PosiTector probe to a single gage body USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to PTB included (Long Form) Conforms to ASTM D4417, ISO 8503-5, NACE RP287, SSPC-PA 17, SSPC-SP5, SP6, SP10, SP11-87T, and others Kit Contents The DeFelsko PosiTector RTR H3 Advanced Surface Profile Gage includes everything needed for testing: PosiTector Standard Gage Body BDYADV PosiTector RTR H Probe PRBRTRH Stainless steel burnishing tool and 5 cleaning cards Surface cleaning putty and check shim(s) Protective lens shield with belt clip Wrist strap and protective rubber holster with belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case shoulder strap and instructions Two (2) year warranty Features Simple Measures peak height (HL) Automatically subtracts the 50.8 μm (2 mils) incompressible film from all readings Minimizes inspector workload by reducing the number of replicas needed to ensure accuracy NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure Rugged indoor/outdoor instrument—ideal for field or shop use NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Produces a more accurate peak-to-valley height measurement. See linearized peak height (HL) Certificate of Calibration showing traceability to PTB included (Long Form) Conforms to national and international standards including ISO 8503-5, ASTM D4417 Method C, NACE RP0287 and SSPC-PA17 Versatile PosiTector body accepts all PosiTector RTR, SPG, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage Mils/Microns switchable Selectable display languages NEW Auto rotating display with Flip Lock Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Software Solutions for viewing, analyzing & reporting data Software Updates via web keep your gage current Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Peak Height (HL) Measurement Range 20 to 115 μm (0.8 to 4.5 mils) Peak Height (HL) Accuracy ± 5 μm (± 0.2 mils) Peak Height (HL) Resolution 1 μm (0.1 mil) Anvil Diameter Ø6.35 mm (Ø0.25 inch) Anvil Pressure 110 gram-force (1.1 Newtons) Size 152 x 61 x 28 mm | (6" x 2.4" x 1.1") Weight 140 g (4.9 oz.) without batteries Probe Specifications Peak Height (HL) Measurement Range 20 - 115 μm 0.8 - 4.5 mils Peak Height (HL) Accuracy ± 5 μm (± 0.2 mils) Peak Height (HL) Resolution 1 μm (0.2 mils) Anvil Diameter Ø6.3 mm (Ø0.25 inch) Anvil Pressure 110 gram-force (1.1 Newtons) How It Works Click to View DeFelsko PosiTector RTR-H Surface Profile Gage How It Works Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Downloads DeFelsko PosiTector RTR H Surface Profile Gage for Blasted Steel and Textured Coatings - Literature DeFelsko PosiTector RTR H Surface Profile Gage for Blasted Steel and Textured Coatings - Instruction Manual DeFelsko PosiTector RTR H Surface Profile Gage for Blasted Steel and Textured Coatings - Linearization of Roughness Measurements DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-rtr-h-c-108_175/defelsko-rtrh3-g-positector-rtr-h3-advanced-replica-tape-reader-surface-profile-gage-p-1857.html Tue, 20 Jun 2023 17:12:55 +0000 USD 1857 DeFelsko 999 RTRH3 https://www.abqindustrial.net/store/images/defelsko-positector-rtrh3-electronic-surface-profile-gage.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/checkline-cts-adjustable-slipping-torque-screwdriver-p-1856.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1856 ]]>Checkline CTS Adjustable Slipping Torque Screwdriver 3 Ranges up to 50 lb-in 3 Models Ranges Available CTS-12: 2-12 lb-in (22 - 135 Ncm) CTS-25: 5-25 lb-in (56 - 280 Ncm) CTS-50: 10-50 lb-in (113 - 565 Ncm) The Checkline CTS is an adjustable torque screwdriver designed for precision assembly applications. A bi-directional cam slips once the set torque is reached making over-tightening impossible. Kit Contents The Checkline CTS Adjustable Slipping Torque Screwdriver includes everything needed for testing: CTS Adjustable Torque Screwdriver Supplied in a plastic tube Instruction manual Calibration certificate Features Includes Calibration Certificate According to DIN ISO 6789 DS Models are Marked in both lb-in and Ncm Uses standard 1/4" (6.3mm) hex bits Clockwise & Counter Clockwise Ergonomic rubber grip Precision radial ball clutch and cam Dial Marked in Lb-in. Nm models available, inquire Specifications Accuracy +/-6% in accordance with ISO 6789:2003 Warranty 1 Year Weight CTS-12: 8.2 oz / 233 gCTS-25 & CTS-50: 11.9 oz / 338 g Length CTS-12: 7.16 in / 182 mmCTS-25 & CTS-50: 7.87 in / 200 mm Handle Diameter 1.41 in / 36 mm Torque Ranges Model Ranges Graduation CTS-12 2-12 lb-in | 22 - 135 Ncm 0.1 lb-in CTS-25 5-25 lb-in | 56 - 280 Ncm 0.5 lb-in CTS-50 10-50 lb-in | 113 - 565 Ncm 1 lb-in Related Products EMT Adjustable Torque Screwdriver Ergo Quickset Adjustable EMT Adjustable Torque Screwdriver - Ergo Quickset Adjustable TSD Torque Screwdriver Moisture Meter with Insertion Probe for wood chips or similar AWS TT-QC / AWS-QC Digital Torque Tester Ideal for in-house testing and calibration of torque tools Mountz Gedore TLS Preset Torque Screwdriver Moisture Meter with Insertion Probe for wood chips or similar Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-screwdrivers-c-101_28/checkline-cts-adjustable-slipping-torque-screwdriver-p-1856.html Tue, 02 Apr 2024 22:12:27 +0000 USD 1856 Checkline 960 CTS https://www.abqindustrial.net/store/images/CTS-Adjustable-Slipping-Torque-Screwdriver.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/humimeter-bmc-wood-chip-moisture-meter-p-1855.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1855 ]]>Price: $2,395.00 up to $2,995.00 Humimeter BMC Wood Chip Moisture Meter Range: 5 to 50% with 0.5% resolution and accuracy of ±1.5% Automatic temperature compensation Includes built-in memory for 10,000 values BMC-USB includes USB data output Measuring Range: 5 - 50% MC 2 Models BMC - Biomass Moisture Meter with Memory - NO OUTPUT BMC-USB - Biomass Moisture Meter with Memory - USB DATA OUTPUT The Humimeter BMC Wood Chip Moisture Meter is a highly accurate moisture meter with automatic bulk density compensation for quick determination of water content of wood chips, barks, wooden pellets, elephant grass, wood shavings and sawdust. The entire measurement procedure is extremely easy & only takes seconds. Simply turn on the gauge, collect the desired Biomass test sample and pour into storage bin and view the water content (%-moisture) on the large backlit LCD display. The Humimeter BMC and BMC-USB models both include a built-in datalogger for storage of 10,000 values. The BMC-USB model ads USB data output for downloading stored data to a PC with software included at no additional charge. Both models include the possibility to program and store three (3) custom calibrations if one of the factory-supplied calibration is not sufficient to produce desired results. Also known as the HGF moisture meter. Kit Contents The BMC Moisture meter for determination of water content of wood chips includes everything needed for testing: Includes Moisture Meter 13 Liter Platic Bucket Batteries and Instruction Manual BMC-USB also includes USB data transfer cable and PC Software Features Measuring range 5 to 50% water content, depending on the material Resolution 0.5% water content Calibration accuracy to reference material: +/-1.5% 12.5 liters sample volume Temperature can be set to °C or °F as required Automatic temperature compensation Temperature range for determination of water content: 0 to +40°C / 32 to 104°F Measurement within seconds without prior treatment of samples Sample temperature measurement Hold function, manual saving of results of up to 10,000 measuring values with measuring point report Operates from 4x AA-Batteries Dimensions 296 x 278 x 508 mm, weight approx. 7.9 kg Scope of supply: BMC with plastic bucket and batteries Measurement within seconds without prior treatment of samples Optional USB interface with internal rechargeable batteries Menu languages: English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish FactoryCalibration Curves Calibration Name Description Category Wood chips For wood chips with fine fraction, consisting of at least one third hardwood. The fine fraction mainly derives from barks, small branches and bushes. P31 to P45 Coarse wood chips For coarse wood chips without fine fraction, consisting of at least one third hardwood. This curve is predominantly suited for measuring wood chips deriving from logs and full trees (poplar, willow) P45 to P63 Softwood chips For wood chips with fine fraction, mainly (more than two thirds) consisting of softwood (spruce, fir, pine, larch). The fine fraction mainly derives from barks, small branches and bushes. P16 to P45 Softwood coarse chips For coarse wood chips without fine fraction, mainly (more than two thirds) consisting of softwood (spruce, fir, pine, larch) of 70% and more. This curve is predominantly suited for measuring wood chips deriving from logs and full trees as well as saw P45 to P63 Fine wood chips For fine wood chips with a high proportion of fine fraction, consisting of at least one third hardwood. The fine fraction mainly derives from barks, small branches and bushes P16 to P31 Free 1 For custom calibration Free 2 For custom calibration Free 3 For custom calibration Reference For self-check using BM-ISO Test Medium Specifications Measuring range 5 to 50% water content, depending on the material Resolution 0.5% water content Calibration accuracy +/- 1.5% Measuring Principle Capacitance Sample volume 12.5 liters Temperature compensation Automatic (°F or °C) Built-in Memory 10.000 measuring values with measuring point report Housing Protection IP40 Menu Languages English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish Display Graphic LCD display with backlight (128 x 64 pixel) Operating temperature -20°C to +40°C (-4 °F to 104 °F) Storage temperatur 0°C to +60°C (32 °F to 140 °F) Dimensions 296 x 278 x 508 mm (11.7" x 10.9" x 20") Weight 7.9 Kg (17.4 Lbs) Related Products Humimeter BMA Biomass Moisture Meter For the determination of water content, bulk density and ATRO tons Humimeter BLL Wood Chip Moisture Meter with Insertion Probe Moisture Meter with Insertion Probe for wood chips or similar Downloads Humimeter BMC Moisture meter for determination of water content of wood chips - Data Sheet Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/humimeter-bmc-wood-chip-moisture-meter-p-1855.html Wed, 17 May 2023 04:08:24 +0000 USD 1855 Humimeter 999 BMC https://www.abqindustrial.net/store/images/BMC-Moisture-meter.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/checkline-etw-spa-digital-torque-wrench-with-angle-measurement-memory-and-data-output-p-1854.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1854 ]]>Checkline ETW-SPA Digital Torque and Angle Wrench with USB Data Output Capacities up to 1460 lb-ft / 2000 N-m Accuracy of ±1% of actual reading The Checkline ETW-SPA is designed for precision torque and angle measurement. The large OLED display indicates real-time, peak torque and angle. 7 measuring units are operator selectable, (lb-in, lb-ft, oz-in, N-m, cN-m, kgf-m, kfg-cm). Users can program 99 preset torque targets for fast and accurate torque application on repetitive tasks. The ETW-SPA provides visual and audible alerts as you approach and hit the target value. Features Bi-Directional Accuracy better than 1% from 10%-100% of Capacity Wireless Data Outuput OPTIONAL, inquire Large Color OLED Screen. High Visibility, Warning Signals Selectable Languages: English, Chinese, French, German, Italian, Polish, Portuguese, Russian and Spanish Battery Life of over 120 hours Includes Traceable Calibration Certificate in accordance with ISO 6789:2003 USB output & data transfer / analysis software Memory (2000+ Measurements) Selectable measuring units: lb-in, lb-ft, oz-in, N-m, cN-m, kgf-m, kfg-cm Angle Measurement OPTIONAL, inquire ASCII Data Outuput OPTIONAL, inquire Specifications Accuracy ±1% (Of indicated) 10 - 100% of capacity (readings start at 5%) Sampling Frequency 500 Hz (500 samples/sec) Display Update Rate 4 Hz (4 times/sec) Memory 2000 readings (Standard) 6000 readings (Optional) Operation Mode Peak hold/ Track /Preset Unit Selection Lb-in, Lb-ft, N-m, N-cm, Kgf-m, Kgf-cm, Oz-in Length 10-100 Nm: 0.4m 200-340 Nm: 0.63m 600-800 Nm: 1.25m 1000 Nm: 1.35m 1500-2000 Nm: 1.65m Head Type Robust Bi-Directional Ratchet Battery 4x AA Battery Life 120 Hours Operating Temperature -10°C ~ 60°C Storage Temperature -20°C ~ 70°C Humidity Up to 90% non-condensing Warranty 1 Years Force Ranges Model Range Drive ETW-SPA-10 1-10 Nm 8.8 - 88 lbf-in 1/4" or 3/8", 9x12 ETW-SPA-20 2-20 Nm 17.7 - 177 lbf-in 1/4" or 3/8", 9x12 ETW-SPA-50 5-50 Nm 44 - 440 lbf-in 3.7 - 37 lbf-ft 1/4" or 3/8", 9x12 ETW-SPA-100 10-100 Nm 89 - 890 lbf-in 7.4 - 74 lbf-ft 1/4" or 3/8", 9x12 ETW-SPA-200 20-200 Nm 15 - 150 lbf-ft 1/2", 14x18 ETW-SPA-340 34-340 Nm 25 - 250 lbf-ft 1/2", 14x18 ETW-SPA-600 60-600 Nm 44 - 440 lbf-ft 3/4", 24x32 ETW-SPA-800 80-800 Nm 59 - 590 lbf-ft 3/4", 24x32 ETW-SPA-1000 100-1000 Nm 74 - 740 lbf-ft 3/4", 24x32 ETW-SPA-1500 150-1500 Nm 110 - 1100 lbf-ft 1", 27x36 ETW-SPA-2000 200-2000 Nm 147-1475 lbf-ft 1", 27x36 Open End Spanner Heads Open end spanner heads are available as options in sizes 1/4 inch to 1 inch / 7-41mm *The ETW-PR-1000 and ETW-PR-2000 have fixed heads and are not compatible with the open end spanners. ETW models up to 100 Nm use heads with 9x12mm tangs, 200 Nm and above use 14x18mm tangs. Downloads ETW-SPA Digital Torque Wrench with Angle Measurement, Memory and Data Output - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/checkline-etw-spa-digital-torque-wrench-with-angle-measurement-memory-and-data-output-p-1854.html Thu, 12 Aug 2021 16:41:13 +0000 USD 1854 Checkline 999 ETW-SPA https://www.abqindustrial.net/store/images/ETW-SPA-Digital-Torque-Wrench-with-Angle-Measurement.jpg Checkline ETW-SPA Digital Torque and Angle Wrench with USB Data OutputDigital Torque and Angle Wrench with USB Data Output

---

Capacities up to 1460 lb-ft / 2000 N-m

---

Accuracy of ±1% of actual reading

---

]]> https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-prbfjs-d-positector-6000-fjs-cabled-high-range-probe-only-p-1852.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1852 ]]>DeFelsko PRBFJS-D Positector 6000 PRBFJS-D Probe Coating Thickness Gage for small parts or hard-to-reach areas. Measuring Range: 0 - 1.0 in. | 0 - 25 mm Display Sold Separately The DeFelsko PosiTector 6000 PRBFJS-D is ideal for for small parts or hard-to-reach areas. The DeFelsko PRBFJS-D PosiTector 6000 Probe for steel, iron, and other magnetic metals. Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2 and others Probe Specifications Range: 0 - 1.0 in. 0 - 25 mm *Accuracy: ± (0.01 in. + 3%) ± (0.2 mm + 3%)   FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FJS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-prbfjs-d-positector-6000-fjs-cabled-high-range-probe-only-p-1852.html Tue, 18 Oct 2022 14:29:52 +0000 USD 1852 DeFelsko 997 PRBFJS https://www.abqindustrial.net/store/images/DeFelsko-PRBFJS-D-PosiTector-6000-High-Range-Probe-FJS.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fjs3-g-positector-6000-fjs3-advanced-ferrous-coating-thickness-gage-p-1851.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1851 ]]>DeFelsko FJS3-G Positector 6000 FJS3 Advanced Coating Thickness Gage for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. Measuring Range: 0 - 1.0 in. | 0 - 25 mm Typical Applications: steel, iron, and other magnetic metals. Cabled Probe The DeFelsko FJS3-G PosiTector 6000 FJS3 Advanced Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector FJS3 is ideal for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. The FJS3 electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy. The DeFelsko PosiTector 6000 FJS3 Advanced features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FJS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFJS Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advaned Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 1.0 in. 0 - 25 mm *Accuracy: ± (0.01 in. + 3%) ± (0.2 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FJS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fjs3-g-positector-6000-fjs3-advanced-ferrous-coating-thickness-gage-p-1851.html Fri, 21 Oct 2022 13:38:28 +0000 USD 1851 DeFelsko 999 FJS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fjs3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fjs1-g-positector-6000-fjs1-standard-ferrous-coating-thickness-gage-p-1850.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1850 ]]>DeFelsko FJS1-G Positector 6000 FJS1 Standard Coating Thickness Gage for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. Model: FJS1 with Standard (1) Body Range: 0 - 1.0 in. | 0 - 25 mm The DeFelsko FJS1-G Positector 6000 FJS1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector FJS1 is ideal for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. The FJS1 electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy. The DeFelsko FJS1-G Positector 6000 FJS1 Standard Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FJS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFJS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,00 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 1.0 in. 0 - 25 mm *Accuracy: ± (0.01 in. + 3%) ± (0.2 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FJS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fjs1-g-positector-6000-fjs1-standard-ferrous-coating-thickness-gage-p-1850.html Fri, 21 Oct 2022 13:38:27 +0000 USD 1850 DeFelsko 998 FJS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fjs1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-prbf90es-d-positector-6000-f90es-cabled-90-extended-microprobe-only-p-1848.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1848 ]]>DeFelsko PRBF90ES-D Positector 6000 PRBF90ES-D Probe Coating Thickness Gage for small parts or hard-to-reach areas. Display Sold Separately The DeFelsko PRBF90ES-D PosiTector 6000 Cabled 90° Extended Microprobe is a right angle extended length (350 mm / 13.75") probe for measuring within areas of low headroom. With our smallest measuring tip, longest probe length and best thin-film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ *Accuracies are stated as a fixed value plus a percentage of the gage's actual reading. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products SmartLink Wirelessly connect PosiTector probes to smart devices Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- PRBF90ES Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-prbf90es-d-positector-6000-f90es-cabled-90-extended-microprobe-only-p-1848.html Tue, 18 Oct 2022 14:29:59 +0000 USD 1848 DeFelsko 1000 PRBF90ES https://www.abqindustrial.net/store/images/DeFelsko-PRBF90ES-D-PosiTector-6000-90-Extended-Microprobe.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90es3-g-positector-6000-f90es3-advanced-ferrous-coating-thickness-gage-p-1847.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1847 ]]>DeFelsko F90S3-EPositector 6000 F90S3 Advanced Coating Thickness Gage for small parts or hard-to-reach areas. Model: F90S3 with Advanced (3) Body Range: 0 - 45 mils (0 - 1150 µm) The DeFelsko F90ES3-G PosiTector 6000 F90ES3 Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The F90ES3 features an extended 90 degree microprobe for measuring non-magnetic coatings on steel substrates. With a small measuring tip, longest probe length and best thin film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko PosiTector 6000 F90ES3 Advanced Body features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 F90ES3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBF90ES-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features Includes ALL features as shown above plus: Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe NEW Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning NEW Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. Multiple stored calibration adjustments for measuring on a variety of substrate conditions SSPC-PA 2 feature determines if film thickness over a large area conforms to user-specified min/max levels PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings Onscreen Batch Annotation-add notes, change batch names and more with built-in QWERTY keyboard WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F90ES Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90es3-g-positector-6000-f90es3-advanced-ferrous-coating-thickness-gage-p-1847.html Fri, 21 Oct 2022 13:33:43 +0000 USD 1847 DeFelsko 999 F90ES3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f90es3-g-coating-thickness.jpg

The F90ES3 features an extended 90 degree microprobe for measuring non-magnetic coatings on steel substrates. With a small measuring tip, longest probe length and best thin film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges.

The DeFelsko PosiTector 6000 F90ES3 Advanced Body features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. ]]> https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90es1-e-positector-6000-f90es1-standard-ferrous-coating-thickness-gage-p-1846.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1846 ]]>DeFelsko F90ES1-G Positector 6000 F90ES1 Standard Coating Thickness Gage for small parts or hard-to-reach areas. Model: F90ES1 with Standard (1) Body Range: 0 - 45 mils (0 - 1150 µm) The DeFelsko F90ES1-G Positector 6000 F90ES1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on Ferrous Metals accurately and quickly using magnetic induction principles. The F90ES1 features an extended 90 degree cabled microprobe for measuring non-magnetic coatings on steel substrates. With a small measuring tip, longest probe length and best thin film accuracy, this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko F90ES1-G Positector 6000 F90ES1 Standard Ferrous Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 F90ES1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBF90ES-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F90ES Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90es1-e-positector-6000-f90es1-standard-ferrous-coating-thickness-gage-p-1846.html Fri, 21 Oct 2022 13:33:42 +0000 USD 1846 DeFelsko 1000 F90ES1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f90es1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-powder-comb-p-1845.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1845 ]]>Check Powder Thickness Before Curing to Ensure Correct Cured Film Thickness Protective leather pouch included with each gage Ideal for set-up and quality control Protective leather pouch included with each gage Check Powder Thickness Before Curing to Ensure Correct Cured Film Thickness Check Powder thickness with Powder Comb before curing to help ensure correctly cured film thickness the first time through the line.Avoid stripping and re-coating which can cause problems with adhesion and coating integrity. Works on a variety of part sizes, shapes and substrates such as metal, plastic, wood, glass, and more Broad stand-offs on both sides of teeth help keep gage perpendicular to surface when measuring Precision gage; manufactured to a tolerance ±5 microns or ±0.0002 inch Protective leather pouch included with each gage Features  Versatility Ideal for set-up and quality control Works on a variety of part sizes, shapes and substrates such as metal, plastic, wood, glass, and more Easy to carry; convenient shirt pocketsize Available in microns (metric) or mils (imperial) Quality Broad stand-offs on both sides of teeth help keep gage perpendicular to surface when measuring Rugged aluminum construction for long gage life and static control Precision gage; manufactured to a tolerance ±5 microns or ±0.0002 inch Protective leather pouch included with each gage Operation  Push the Powder Comb perpendicularly into the dry powder so that the two stand-offs (end tabs) on both sides of the teeth rest firmly on the substrate. Drag the Powder Comb along the surface of the coated part for at least 1 centimeter. Remove the Powder Comb from the surface and examine the marks left in the powder.The powder thickness is between the highest numbered tooth which made a mark and has powder clinging to it, and the next highest tooth which left no mark and has no powder clinging to it. Example: The 75 and 150 micron teeth both make lines and have powder clinging to them but the 225 mil tooth does not.The uncured powder thickness is determined to be between 150 and 225 microns.(see above image) Note - Most powders cure to approximately 50% of their dry thickness.Marks left by the gage may affect the characteristics of the cured film. Powder Comb Models    Height Tooth 1 Height Tooth 2 Height Tooth 3 Height Tooth 4 Model 1 (mils) 3 6 9 12 Model 2 (mils) 10 15 20 25 Model 3 (mils) 20 30 40 50 Model 4 (μm) 75 150 225 300 Model 5 (μm) 250 375 500 625 Model 6 (μm) 500 750 1000 1250 Downloads DeFelsko Powder Comb - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-powder-comb-p-1845.html Tue, 02 Apr 2024 16:25:28 +0000 USD 1845 DeFelsko 962 DPC https://www.abqindustrial.net/store/images/DeFelsko-Powder-Comb.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50tkit-50-mm-x-50-mm-tile-conversion-kit-for-positest-at-adhesion-testers-p-1844.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1844 ]]>DeFelsko AT50TKIT 50 mm x 50 mm Tile Conversion Kit for PosiTest AT Adhesion Testers Manufacturer: DeFelsko 50 mm x 50 mm Tile Conversion Kit Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm x 50 mm square dollies conforming to BS EN 12004-2 Ideal for measuring the tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives Includes 50 mm x 50 mm steel dollies (4), and 50 mm x 50 mm stand-off Downloads DeFelsko AT50TKIT 50 x 50 mm Tile Conversion Kit - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50tkit-50-mm-x-50-mm-tile-conversion-kit-for-positest-at-adhesion-testers-p-1844.html Mon, 21 Aug 2023 22:07:00 +0000 USD 1844 DeFelsko 1000 AT50TKIT https://www.abqindustrial.net/store/images/DeFelsko-Conversion-Kit-AT50TKIT-PosiTest-Adhesion-Testers.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50ckit-50-mm-c1583-conversion-kit-for-positest-atm-or-ata-adhesion-testers-p-1843.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1843 ]]>DeFelsko AT50CKIT 50 mm C1583 Conversion Kit for PosiTest ATM or ATA Adhesion Testers Manufacturer: DeFelsko 50 mm C1583 Conversion Kit Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm dollies conforming to ASTM C1583 Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) Downloads DeFelsko AT50CKIT 50 mm C1583 Conversion Kit - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50ckit-50-mm-c1583-conversion-kit-for-positest-atm-or-ata-adhesion-testers-p-1843.html Mon, 21 Aug 2023 22:06:59 +0000 USD 1843 DeFelsko 994 AT50CKIT https://www.abqindustrial.net/store/images/DeFelsko-Conversion-Kit-AT50CKIT-PosiTest-Adhesion-Testers.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50kit-50mm-conversion-kit-for-positest-atm20-or-ata20-adhesion-testers-p-1842.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1842 ]]>DeFelsko AT50KIT 50mm Conversion Kit for PosiTest ATM20 or ATA20 Adhesion Testers Manufacturer: DeFelsko 50 mm Conversion Kit Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatings on wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at50kit-50mm-conversion-kit-for-positest-atm20-or-ata20-adhesion-testers-p-1842.html Mon, 21 Aug 2023 22:06:57 +0000 USD 1842 DeFelsko 986 AT50KIT https://www.abqindustrial.net/store/images/DeFelsko-Conversion-Kit-AT50KIT-PosiTest-Adhesion-Testers.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at20kit-20mm-conversion-kit-for-positest-atm50-or-ata50-adhesion-testers-p-1841.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1841 ]]>DeFelsko AT20KIT 20mm Conversion Kit for PosiTest ATM50 or ATA50 Adhesion Testers Manufacturer: DeFelsko 20 mm Conversion Kit: Interchangeable stand-off allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-at20kit-20mm-conversion-kit-for-positest-atm50-or-ata50-adhesion-testers-p-1841.html Mon, 21 Aug 2023 22:06:56 +0000 USD 1841 DeFelsko 990 AT20KIT https://www.abqindustrial.net/store/images/DeFelsko-Conversion-Kit-AT20KIT-PosiTest-Adhesion-Testers.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28c-taper-gauge-gal-sub28c-inch-metric-p-1838.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1838 ]]>G.A.L. Gage Co. Cat # SUB 28c Taper Gauge GAL-SUB28c, Inch & Metric Taper Gauge Features 410 Stainless Steel Measurement Scale On side I: Inches On side II: Metric Specifications Inches Metric Max Range 2" 50mm Min Range 1-3/16" 30mm Graduations 1/64" 0.2mm Downloads G.A.L. Gage Co. Cat # SUB 28c Taper Gauge GAL-SUB28c - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28c-taper-gauge-gal-sub28c-inch-metric-p-1838.html Tue, 22 Feb 2022 21:57:59 +0000 USD 1838 G.A.L. Gage Co. 999 Cat # Sub 28 C https://www.abqindustrial.net/store/images/Gal-28C-Taper-Gauge.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28b-taper-gauge-gal-sub28b-inch-metric-p-1837.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1837 ]]>G.A.L. Gage Co. Cat # SUB 28b Taper Gauge GAL-SUB28b, Inch & Metric Taper Gauge Features 410 Stainless Steel Measurement Scale On side I: Inches On side II: Metric Specifications Inches Metric Max Range 1-3/16" 30mm Min Range 5/8" 15mm Graduations 1/64" 0.1mm Downloads G.A.L. Gage Co. Cat # SUB 28b Taper Gauge GAL-SUB28b, Inch & Metric - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28b-taper-gauge-gal-sub28b-inch-metric-p-1837.html Tue, 22 Feb 2022 21:57:25 +0000 USD 1837 G.A.L. Gage Co. 998 Cat # Sub 28 B https://www.abqindustrial.net/store/images/Gal-28B-Taper-Gauge.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28a-taper-gauge-gal-sub28a-inch-metric-p-1836.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1836 ]]>G.A.L. Gage Co. Cat # SUB 28a Taper Gauge GAL-SUB28a, Inch & Metric G.A.L. Gage Co. Weld Measuring Gaps Taper Gauge Features 410 Stainless Steel Measurement Scale On side I: Inches On side II: Metric Specifications Inches Metric Max Range 5/8" 15mm Min Range 1/32" 1.0mm Graduations 1/64" 0.1mm Downloads G.A.L. Gage Co. Cat # SUB 28a Taper Gauge GAL-SUB28a, Inch & Metric - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-sub-28a-taper-gauge-gal-sub28a-inch-metric-p-1836.html Tue, 22 Feb 2022 21:58:42 +0000 USD 1836 G.A.L. Gage Co. 959 Cat # Sub 28 A https://www.abqindustrial.net/store/images/Gal-28A-Taper-Gauge.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-positector-dpm-l-dew-point-meter-logger-p-1835.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1835 ]]>DeFelsko PosiTector DPM L Dew Point Meter Logger Fast response, precision sensors provide accurate, repeatable readings Environmentally sealed enclosure – weatherproof, dustproof, and shockproof - meets or exceeds IP65 Internal memory storage of 10,000 datasets (60,000 readings) The DeFelsko PosiTector DPM L Dew Point Meter Logger is a magnetic probe that attaches to steel structures for monitoring climatic conditions. Measures and records climatic conditions including: relative humidity, air temperature, surface temperature, dew point temperature, difference between surface and dew point temperatures, and wet bulb temperature. Fast response, precision sensors provide accurate, repeatable readings Environmentally sealed enclosure – weatherproof, dustproof, and shockproof - meets or exceeds IP65 Internal memory storage of 10,000 datasets (60,000 readings) Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPM L Dew Point Meter Logger Kit includes everything needed for testing: PosiTector DPM L Dew Point Meter Logger DPML Two CR2032 coin cell batteries Air/surface temperature sensors, RH sensor Long Form Certificate of Calibration traceable to NIST Storage container and instructions Two (2) year warranty Features Attaches to steel structures to measure and record environmental parameters independently for up to 200 days. Stored datasets can be downloaded using a PosiTector Advanced gage body or Apple/Android smart device. Records parameters at user selected intervals from 1 min. to 8 hrs. Environmentally sealed enclosure—weatherproof, dustproof, and shockproof—meets or exceeds IP65 Fast response precision sensors provide accurate, repeatable readings Internal memory storage of 10,000 datasets (60,000 readings) Kensington Security Slot for anti-theft protection. PosiTector DPM L Lock sold separately. Uses common lithium coin cell batteries (CR2032) Every stored dataset is date and time stamped Certificate of Calibration showing traceability to NIST included Conforms to national and international standards including ISO and ASTM Two year warranty Advanced Features PosiTector App and PosiTector Advanced Display and record climatic parameters from remote (wireless) PosiTector DPM L probes Automatically download readings once connected via Bluetooth 4.0 Technology (Bluetooth Smart) View live measurement data on screen Alarms indicate when climate conditions exceed user-selectable parameters Smart TrendTM indicators identify rising falling or stable readings Easily create reports and manage data with PosiSoft software PosiTector App An easy-to-use mobile app (iOS/Android) that wirelessly connects to PosiTector DPM L Smart Probes. Automatically generate user-formatted reports and share via email, text, cloud storage services like Dropbox, and more Easily synchronizing readings with PosiSoft Desktop software via PosiSoft.net PosiTector Advanced NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches On-screen graphing of measurement data Alarms indicate when climate conditions exceed user-selectable parameters Includes the entire PosiSoft Suite of solutions for analyzing and reporting data View and print readings and graphs using universal PC/Mac web browsers and file explorers Specifications   Range Accuracy ResolutionSurface Temperature -40° to 80° C 80° to 190° C -40° to 175° F 175° to 375° F ± 0.5° C ± 1.5° C ± 1° F ± 3° F 0.1° C 0.1° FAir Temperature -40° to 80° C -40° to 175° F ± 0.5° C ± 1° F 0.1° C 0.1° F Humidity 0 to 100% ± 3% 0.1% Dew Point -60° to 80° C -76° to 175° F ± 0.3° C* ± 5.4° F* 0.1° C 0.1° F * Dependent on RH. See Dew Point (Td) Accuracy for more information. Size Ø50 mm x 38 mm (Ø2" w x 1.5" h)Weight 50 g (1.8 oz.) without batteryOperating Range -10° to 60° CMemory 10,000 datasets@ 5 min interval = 34 days@ 10 min interval = 68 daysLogging Measurement Interval Adjustable from 1 min – 8 hoursIP Rating 65Battery Life^ @ 5 min interval = 120 days@ 1 hour interval = 200 days ^ The stated battery life is for unattended logging. Battery life is reduced while connected to the PosiTector App or instrument. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Related Products DeFelsko PosiTector DPM Measures and records climatic conditions Kensington Lock Optional Kensington Lock keeps the PosiTector DPM L safe and secure Downloads DeFelsko PosiTector DPM L Dew Point Meter Logger - Quick Guide DeFelsko PosiTector DPM L Dew Point Meter Logger - Data Sheet DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-positector-dpm-l-dew-point-meter-logger-p-1835.html Tue, 09 Apr 2024 07:49:54 +0000 USD 1835 DeFelsko 902 DPML https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-DPML.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-leather-c-107_140/delmhorst-jl-2000-digital-pin-type-leather-moisture-meter-p-1834.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1834 ]]>Delmhorst JL-2000 Digital Pin-Type Leather Moisture Meter Bright, clear digital display Averages up to 100 readings Moisture Range: 10%-28% on leather The Delmhorst JL-2000 Digital Pin-Type Leather Moisture Meter is the perfect quality control tool for tanneries everywhere. Don’t leave the quality of your product to chance. Check moisture content with the Delmhorst JL-2000 leather moisture meter. Kit Contents Delmhorst JL-2000 Digital Leather Moisture Meter Instructions Features Bright, clear digital display Averages up to 100 readings Moisture Range: 10%-28% on leather Built-in calibration check Integral contact pins mounted on top of meter provide 5/16” penetration Built-in connector accepts any Delmhorst electrode Size: 8” x 3” x 1 5/8” Weight: 10 oz Rugged construction ensures years of reliable use Sturdy plastic carrying case 9V battery 1-year warranty Accessories & Electrodes 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum MCS-JL-2000 This moisture content standard is great for verifying that your JL-2000 leather moisture meter is in calibration. With two electrical resistance values (13% and 21%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-JL-2000 is also available with a letter of certification traceable to NIST 4-E Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Useful for Leather producers: Use for tough leather Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration Downloads Delmhorst JL-2000 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Structurally sound and beautiful in appearance, wood is the ideal raw material. Delmhorst customers in the woodworking/lumber industry know that moisture content is the single most important factor affecting the quality of their products. To ensure quality, from the mill and dry kiln to the finishing floor, Delmhorst moisture meters help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade lumber cannot make a difference if moisture content goes unchecked. Are there different types of moisture meters? There are two types of moisture meters commonly used in lumber and woodworking applications. A pin-type uses two pins that penetrate into wood at the users desired depth. Pin-type meters are the only instruments that indicate the moisture conditions inside a board or a piece of wood. Using insulated pins, only the uncoated tips are exposed to the wood fiber, providing more accurate readings of moisture content at various levels of penetration. Using a pin type meter with insulated pins is still the most effective method to determine moisture gradient, which is the difference between shell and core moisture content. Pinless moisture meters read moisture closest to the source of the magnetic field, in this case, at the surface. For quickly scanning finished product, a pin-less meter is a convenient way to identify a problem area. However, a pinless meter cannot differentiate between shell and core moisture content and will not detect a moisture gradient. Also, readings provided by a pinless meters are affected by surface moisture. Please refer to the diagram below for a basic look at the difference between readings obtained from a pin-type meter compared to a surface meter. This diagram illustrates that pin-type meters and surface meters provide different information about the moisture content in a board. Each technology may be appropriate for different applications. Before choosing a meter, it is important to understand these differences in readings and choose the type of meter best suited for your particular application. How does a moisture meter work? Using the principle of electrical resistance, pin-type meters use the board as an element in a circuit by driving two pins or electrodes into it. This method works because moisture conducts electricity well and dry wood is an effective insulator. Most pinless meters use the capacitance method, which uses the relationship between the moisture content and the dielectric properties of the wood. Both the resistance and the dielectric properties of wood change in direct proportion to its moisture content, within a specific range. In what range of moisture content do pin-type meters operate? Resistance-type meters express moisture content as a percentage of the oven-dry weight of the wood. These meters work best from the range of fiber saturation point (25 to 30 percent) down to around 6 percent. Below 6 percent, it's tough to make accurate, repeatable readings because of the high electrical resistance in really dry wood. This is particulary true at low relative humidity levels, generally below 30 percent. Electrical accuracy of all Delmhorst meters is better than 0.5 percent between 6 and 12 percent moisture content; better than 1 percent between 12 and 20 percent moisture content; and better than 2 percent between 20 and 30 percent, or at fiber saturation point. You can check accuracy either through the internal check or with a Moisture Content Standard. At what moisture content level do i minimize defects? Acceptable moisture content depends on the final use of the wood. Wood for fine furniture should be dried to 6 to 8 percent in most areas of the country, with very little variation among pieces and between the shell and core. Appropriate moisture content is also climate-driven. To determine the attainable moisture content - or equilibrium moisture content (EMC) - in your part of the country, hang small, thin samples of a wood species in your shop or plant and taking daily readings. When the samples' moisture content remains constant, they have reached the equilibrium level. This level will change from season to season, but you'll know the range within which to work. (Figure III) How do i determine the distribution of moisture in a board? Here's where Delmhorst recommends the use of a pin-type moisture meter. First, to determine how the moisture is moving through a board, make a series of shell readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. The Delmhorst 26-ES electrode with insulated pins is the easiest and surest way to detect a moisture gradient. Since the 26-E pinpoints are not insulated, two or three quick readings at different levels of penetration will indicate if the board is well seasoned, or properly dried. A normal gradient usually develops from the wetter core to the drier surface, with an average reading at between 1/4 to 1/5 of the board thickness. Even non-insulated pins, which measure the wettest fibers, will provide a good indication of how the wood is drying. If you are using non-insulated pins, push the pins just about 1/16" into the surface, read the meter, and then push the pins to their full depth. For kiln-dried stock, the final reading should be between 6 and 12 percent; with your first reading about 1 percent lower. For air-dried stock, the final reading is typically between 12 and 19 percent, with the first reading between 2 and 3 percent lower. Meter readings outside of these ranges indicate that the board is poorly seasoned. Pin-less meters scan through the cross section of a board taking into account the moisture in the entire penetrated area. If there is a high concentration of moisture at the surface, the reading will be skewed to reflect this surface moisture. If the surface is dry and core moisture exists, the readings will be lower than the representative moisture levels throughout the board. Does surface moisture skew a delmhorst meter reading? Moisture caused by exposure to rain, fog or high relative humidity is easily and accurately detected with insulated pins. If you're using non-insulated pins, push them 1/16" into the wood and read the meter. Then push them to their full penetration. The meter reading should increase by 1 to 2 points, just because of the greater contact. If there is no increase, or the increase is less than 1 percent, the wood is wet on the surface and the readings are unreliable. As described in the answer to the question above, readings taken with a surface meter are affected by surface moisture, making it difficult to determine if the surface moisture is a result of standing water caused by rain, or if it is representative of the moisture content throughout the board. How many measurements does delmhorst recommend for an accurate sampling? Accuracy of the readings depends on how representative the samples are of the entire load. In an ideal situation, when all the boards in a load have the same moisture content, and the distribution in each board is uniform, only a few readings are needed. But since this ideal condition doesn't often happen, start by checking a large percentage of pieces. If the readings are within close range, it's apparent that the load is fairly uniform. For critical use, check 5 or 10 percent of the load, and be sure to look at boards from all parts of the load. Check slower drying quarter sawn boards as well as flat sawn lumber. If you can only drive pins into the edge, be sure to use the longest pins available to reach the fibers as deep as the board is thick. The Delmhorst RDM series moisture meters with data collection and statistical analysis capabilities are ideal for simplifying the entire sampling procedure and providing backup documentation. How far should i drive non-insulated pins into wood? To full depth if possible. However, at moisture levels below 10%, it is usually sufficient to make good, positive contact with the wood. At higher levels of moisture and especially if you have a steep gradient, full penetration is a must. Otherwise you can have discrepancies between meter readings and actual moisture content of as much as 5 or 6 points, especially in the range above 20 percent. For best results in such cases, use insulated pins. Do i get the same reading if i use 2-pin insulated or 4-pin non-insulated electrodes? The original Delmhorst calibration was developed with a 4-pin electrode - four non-insulated steel needles, with 5/16" penetration - in samples with uniform moisture distribution. For greatest accuracy, a small correction is necessary when using electrodes with two insulated pins. The latest Delmhorst models available are calibrated either for the 2-pin electrode only, or are programmable for both 2-pin and 4-pin electrodes. How does temperature affect the accuracy of meter readings? After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C). In field use, no correction is necessary if the wood temperature is between 50° F and 90° F. If the temperature correction is not built in the meter, use the slide rule or chart we supply with each meter. The temperature of the wood does not affect pin-less type meters, unless the lumber is frozen. Are delmhorst meters accurate on frozen lumber? As long as the wood is not frozen solid and remains conductive, a pin-type meter will give reliable readings. However, most instrumentation, unless specifically designed for extreme weather conditions, will not work well in constant sub-freezing temperatures. How do delmhorst meters correct for species variation? When using a pin-type meter, all species yield different readings at the same moisture content. This is due to the fact that the electrical characteristics of different wood species vary. Delmhorst uses the USDA standard - Douglas Fir - as the basis for all calibrations. When using a Delmhorst meter on other species, either refer to the species correction chart, or key in your species into one of our microprocessor-based meters for an automatic correction. Pinless meters also yield different readings for different species. However, instead of electrical characteristics affecting the readings, wood density affects the readings. Refer to the species correction chart enclosed with your meter to adjust the readings accordingly. Does a group species correction provide an accurate meter reading? Species corrections are most accurate when handled as an individual correction, either through the a species correction chart, or automatically, through software. While not as accurate as individual corrections, the group correction is adequate for practical purposes, as long as the correction is close to the individual factor for the species. What about exotic species or other species not on the charts? If the species correction is simply not available, you can take readings below 10 percent at face value. Any correction is so small that depending on the application; a correction may not be necessary. A good moisture meter is still valuable, even without a correction factor because you can use it to determine the equilibrium moisture content (EMC). A meter reading by itself is not always as important as allowing the wood to attain its EMC level where it won't change dimension, crack, or split. Does the glue used in plywood affect meter accuracy? In most cases, no. To verify this, use insulated pins to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the meter on plywood as you would any solid material and take the readings at face value, without species correction. What about the chemicals in treated lumber? Recent studies have shown that you can use a Delmhorst meter with confidence at the treating plant, job site, or when the wood is in service if the preservative is a "C oxide" formulation (CCA-C) widely used today. Our experience has shown that at higher moisture content levels (above 20 percent), chemically treated lumber tends to yield somewhat erratic readings. What about particleboard and other manufactured materials? Chemical additives may or may not affect meter readings. Use the meter to make qualitative, comparative readings. If greater accuracy is required, Delmhorst can help you to develop a specific calibration. How do delmhorst meters handle readings on rough-surfaced lumber and cupped boards? With a pin-type meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pin-less meters, however, need full exposure to a flat surface so their readings on some uneven surfaces may be unreliable. Are there board width limitations in using moisture meters? Board width is not a limiting factor when using a pin type moisture meter. As long as the pins make good contact, the meter can be used on anything from small dowels to wide planks. For accurate results with a pinless meter, the material you're testing must be at least the width of the scanning area on the bottom of the meter. What happens if i bring a delmhorst meter into a dry kiln? Moisture meters, like most precision instruments, are sensitive to moisture. We do not recommend taking a meter into a kiln, especially from cold surroundings. If you must, take a few minutes to warm up the meter and electrode to a maximum 100°F, so that the higher temperature and moisture levels in the kiln will not affect the meter for a few minutes. If you don't acclimate the meter, readings will be erratic at best. While Delmhorst meters are built for the harsh mill environment, continued exposure to high heat and humidity will invite corrosion and shorten the life of a meter's keypad, display and PC board components. How can i monitor moisture content during drying without going into the kiln? Use the Delmhorst Kil-Mo-Trol, a remote probe system that measures the moisture content of lumber during the drying process. Resistance probes or contact pins are located at various "stations" throughout the lumber packages to monitor shell and core or core only moisture content readings. This technique is proven for both hardwood and softwood drying, and can be used in any type of dry kiln, pre-dryer, or air-drying operation. For more information about Kil-Mo-Trol, please close this window and click on the Kil-Mo-Trol Moisture Monitor button. How does static electricity affect meter readings? In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. Depending on the conditions, any one of them can work, either alone or in combination with another. Why do meter readings not always agree? If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary. Assuming both meters are electrically correct, the difference usually can be attributed to use of different electrodes, pin penetration, and species and temperature corrections. When meters are used for lumber inspections by vendors and buyers, the two parties should have a basis for comparing readings obtained with the instruments they are using. How do i keep a delmhorst meter in good working condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-leather-c-107_140/delmhorst-jl-2000-digital-pin-type-leather-moisture-meter-p-1834.html Tue, 09 Apr 2024 21:51:09 +0000 USD 1834 Delmhorst 992 JL-2000 https://www.abqindustrial.net/store/images/Delmhorst-JL-2000-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-navpro-navigator-pro-3-in-1-moisture-meter-p-1833.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1833 ]]>Delmhorst NAVPRO Navigator Pro 3-in-1 Moisture Meter Simplified menu options in Basic Mode for quick and easy use Job definition of up to 5 jobs with unique Job ID numbers in Enhanced Mode Data grouping by specific rooms, with up to 32 rooms per job Meeting the restoration contractor's demand for detailed, accurate, and accessible information. The Navigator Pro, Delmhorst’s easy to use 3-in-1 meter, offers pin mode, scan mode, and thermo-hygrometer in a single handheld unit. The Navigator Pro also features advanced job definition that organizes readings of the floor, wall, and ceiling in affected rooms. Stored readings can be downloaded to a spreadsheet on your PC, providing clear, complete documentation of every job. With features you can't find anywhere else, plus Delmhorst's renowned quality and service, the Navigator Pro will guide you from wet to dry! The Delmhorst NAVPRO Navigator Moisture Meter Pro can be used to check moisture in drywall, insulation, wood, concrete, and plaster. It traces leaks to find exterior moisture and dry rot. Kit Contents Delmhorst NAVPROW/CS Navigator Pro 3-in-1 Moisture Meter Delmhorst NAVPRO Navigator Pro 3-in-1 Moisture Meter RHT-S1 Humidity Sensor Carrying Case Instructions Delmhorst NAVPRO/BP Navigator Pro 3-in-1 Moisture Meter, Basic Package Delmhorst NAVPRO Navigator Pro 3-in-1 Moisture Meter RHT-S1 Humidity Sensor 2-E Electrode contact pins PC/KIT Software Application Program Carrying Case Instructions Delmhorst NAVPRO/RP Navigator Pro 3-in-1 Moisture Meter, Restoration Package Delmhorst NAVPRO Navigator Pro 3-in-1 Moisture Meter 26-ES Electrode contact pins 2-E Electrode contact pins 21-E Electrode contact pins PC/KIT Software Application Program RHT-C1 Cable - Extension cable Carrying Case Instructions Features Simplified menu options in Basic Mode for quick and easy use Job definition of up to 5 jobs with unique Job ID numbers in Enhanced Mode Data grouping by specific rooms, with up to 32 rooms per job Pin mode: 5%-60% MC wood scale 0-100 numerical reference scale 0.1% - 6% drywall scale Scan Mode: 0-300 numerical reference scale Thermo-hygrometer: Measures temp/RH Calculates GPP/dew point Fast response time Store up to 1400 readings with date, time, room, and location stamp View stored readings on screen Optional software lets you download readings to your computer and generate Excel reports Size: 8 ½” x 3 3/8” x 1 ¾” Weight: 11 oz Rugged construction ensures years of reliable use Sturdy plastic carrying case 1-year warranty Accessories & Electrodes 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. PC/KIT Enables you to download stored readings from the meter to a PC via infrared linking. This software will enable you to: Export job data to Excel. Customize printing options. View readings and stats in the application program. Save and print individual or group job readings. Customize job title. View data in Fahrenheit or Celsius. Append notes to each job. Generate graphical histogram. All these features are provided in a easy to use GUI interface, and are compatible with Windows 95/98/ME/2000/XP/Vista/7/8/10. The PC/KIT is included in several of our moisture meter packages, or may be ordered separately. It can be used with the Moisture Check, Navigator Pro, RDM-3, RDM-3P, and Total Check moisture meters Relative Humidity Test Kit The relative humidity test kit is great for testing the accuracy of our detachable RH/T-S1 and RH/T-S3 relative humidity sensors. The air inside the test kit bottle is controlled by a salt solution, which keeps the relative humidity constant. The kit is available with either 33% or 75% relative humidity (Order asRH/TK/33 and RH/TK/75 respectively). RH/T-C1 Extension cable that connects to the RH/T-S3, allowing you to easily view your meter’s screen while performing ASTM F-2170 tests on concrete. RH/T-S1 Detachable relative humidity/temperature sensor that is included with Navigator Pro and HT-4000. Can be used to obtain ambient RH/T readings. Order individually or in packs of 5 as RH/T-S1/5 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration 22-E is also available as the 22- ET with a tapped handle for hard to reach areas 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration 22-E is also available as the 22-ET with a tapped handle for hard to reach areas 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Downloads Delmhorst Navigator Pro Moisture Meters - Instruction Manual Delmhorst Navigator Pro Moisture Meters - Relative Humidity Sensor Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-navpro-navigator-pro-3-in-1-moisture-meter-p-1833.html Wed, 16 Nov 2022 22:59:12 +0000 USD 1833 Delmhorst 994 NAVPRO https://www.abqindustrial.net/store/images/Delmhorst-NAVIGATOR-PRO-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-quicknav-3-in-1-moisture-meter-p-1832.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1832 ]]>Delmhorst QuickNav 3-in-1 Moisture Meter Scan depth of ¾" Correction scales for wood and drywall Moisture range of 6-60% on wood and 0.1-6% on drywall QuickNav, Delmhorst’s easy to use 3-in-1 meter, offers pin mode, scan mode, and thermo-hygrometer in a single handheld unit. The QuickNav will instantly calculate dewpoint, grains per pound (GPP) and vapor pressure for fast, accurate moisture measurement. QuickNav offers the same high performance pin mode, scan mode, and thermo-hygrometer as our industry leading NavigatorPro, in an easier to use format. If you are looking for the versatility of a 3-in-1 meter and do not need to store and download reading, QuickNav is the answer Kit Contents Delmhorst QUICKNAV/BP QuickNav Moisture Meter, Basic Package Delmhorst QuickNav 3-in-1 Moisture Meter RH Sensor 2-E Electrode Carrying Case Instructions Delmhorst QUICKNAV/CP QuickNav Moisture Meter, Complete Package Delmhorst QuickNav 3-in-1 Moisture Meter RH Sensor Carrying Case 2-E Electrode 26-ES Electrode 21-E Electrode Instructions Features Scan depth of ¾" Correction scales for wood and drywall Moisture range of 6-60% on wood and 0.1-6% on drywall Scan range of 0-300 numerical reference scale RH/T Range of 0-100% RH Measures temperature over the range of -40°F-255°F with accuracy of +/- 1.8°F over -4°F to 158F (range of -40°C - 124°C with accuracy of +/- 1°C over -20° to 70°C)   Dewpoint -40∘F - 176∘F Calculates Vapor Pressure Grains Per Pound (GPP) 0.1 – 3820 GPP (0.1 – 545GPK) Backlit LCD screen Hold feature that allows to hold the displayed reading when testing hard to reach areas Adjustable alarm alerts you when preselected moisture level is reached, easily compare to established dry standard Carrying Case 1 year warranty Accessories & Electrodes RH/T-S1 Detachable relative humidity/temperature sensor that is included with Navigator Pro and HT-4000. Can be used to obtain ambient RH/T readings. Order individually or in packs of 5 as RH/T-S1/5 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8" and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16" penetration 22-E is also available as the 22- ET with a tapped handle for hard to reach areas 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16" penetration 22-E is also available as the 22-ET with a tapped handle for hard to reach areas 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe" to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough Downloads Delmhorst QuickNav Moisture Meters - Instruction Manual Delmhorst QuickNav Moisture Meters - Relative Humidity Sensor Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-quicknav-3-in-1-moisture-meter-p-1832.html Wed, 16 Nov 2022 23:01:12 +0000 USD 1832 Delmhorst 989 QUICKNAV https://www.abqindustrial.net/store/images/Delmhorst-QUICKNAV-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-industrial-mill-c-107_138_152/delmhorst-rc-1e-wood-moisture-meter-p-1831.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1831 ]]>Delmhorst RC-1E Wood Moisture Meter Easy-to-read analog display Measures moisture in gypsum using a three-range scale: (0.2%-1%, 1%-8%, and 8%-50%) Built-in battery and calibration check Clad in a durable and beautifully finished hardwood case, the RC-1E’s classic design and wide moisture measurement range make it a valuable addition to your toolkit. The Delmhorst RC-1E Wood Moisture Meter has been a favorite among dry kiln operators for years. Kit Contents Delmhorst RC-1E Analog Wood Moisture Meter Delmhorst RC-1E Wood Moisture Meter Instructions Delmhorst RC-1E/PKG Analog Wood Moisture Meter Package Delmhorst RC-1E Wood Moisture Meter 26-ES Electrode 496 contact pins Instructions Delmhorst RC-1E/SP Analog Wood Moisture Meter Southern Pine Delmhorst RC-1E/SP Wood Moisture Meter Instructions Delmhorst RC-1E/SP/PKG Analog Wood Moisture Meter Package - Southern Pine Delmhorst RC-1E/SP Wood Moisture Meter 26-ES Electrode 496 contact pins Instructions Features Easy-to-read analog display. Measures moisture in Douglas Fir using a three-range scale (6%-80%, 6%-11%, 11%-25% , and 25%-80%). Also available with Southern Pine correction as RC-1E/SP. Built-in calibration check. Built-in battery check. Auto shut-off timer. Size: 6 1/2" X 8" X 3". Weight: 3 lbs. 8 oz. Rugged construction ensures years of reliable use. 9V battery. 1-year warranty. Accessories & Electrodes 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick 496/24 496/100 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001 A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer 18-ES Similar to 26-ES, the 18-ES has a 17" steel shaft. Comes with 608 insulated pins for 3 1/4" penetration. Ideal for timber, poles, and ties. Also offered - 18-ED - with depth gauge to measure pin penetration 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration 22-E is also available as the 22- ET with a tapped handle for hard to reach areas 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications: Home inspector: Use on wood joists and drywall. Paper producer: Use on curved surfaces such as cardboard and paper tubes. Woodworker: Use on timber, poles, and veneer. 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 42-E/B T-handle electrode with 3/8" penetration to check moisture in stacks in or out of the kiln. Stickers must be at least 5/8". Also offered in and 4 1/2 ft. length as 42-EB/4-5. 4-E Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Useful for Dry-kiln operators: Use on kiln-dried boards up to 2" and on air-dried boards up to 5/4 Leather producers: Use for tough leather Downloads Delmhorst RC-1E Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-industrial-mill-c-107_138_152/delmhorst-rc-1e-wood-moisture-meter-p-1831.html Wed, 16 Nov 2022 23:02:19 +0000 USD 1831 Delmhorst 968 RC-1E https://www.abqindustrial.net/store/images/Delmhorst-RC-1E-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hemp-c-107_135_145/delmhorst-f-2000-hemp-digital-moisture-meter-for-hemp-p-1830.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1830 ]]>Delmhorst F-2000 HEMP Digital Moisture Meter for Hemp Bright, clear digital display Averages up to 100 accumulated readings Displays average and highest of accumulated readings The Delmhorst F-2000 Digital Moisture Meter for Hemp is ideal for hemp producers looking to enhance quality control. The F-2000 has the versatility to check hemp in its various forms. Kit Contents Delmhorst F-2000/HEMP/PKG Digital Moisture Meter for Hemp, Hemp 10" Package Delmhorst F-2000 Digital Moisture Meter for Hemp H-4 Handle - Electrode handle 830-2 10" for testing standard and high density bales 831 Short Pin Probe for testing hemp volume in containers Carrying Case Instructions Delmhorst F-2000/HEMP/18/PKG Digital Moisture Meter for Hemp, Hemp 18" Package Delmhorst F-2000 Digital Moisture Meter for Hemp H-4 Handle - Electrode handle 830-3 18” Prod for testing standard and high density bales 831 Short Pin Probe for testing hemp volume in containers Carrying Case Instructions Features Bright, clear digital display. Averages up to 100 accumulated readings. Displays average and highest of accumulated readings. Moisture Range: 6%-40%.on hay. Hemp Moisture Range: 7%-34% Built-in calibration check. Audible, adjustable alarm alerts you when a pre-selected MC has been reached. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 3-year warranty. Accessories & Electrodes 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately MCS-44 This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops 831 Short Pin Prod For testing hemp volume in containers. (requires H-4 Handle) H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use in measuring moisture in the hemp flower Downloads Delmhorst F-2000 for Hemp Moisture Meters - Instruction Manual Delmhorst F-2000 for Hemp Moisture Meters - Conversion Chart Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hemp-c-107_135_145/delmhorst-f-2000-hemp-digital-moisture-meter-for-hemp-p-1830.html Tue, 09 Apr 2024 21:41:25 +0000 USD 1830 Delmhorst 984 F-2000 HEMP https://www.abqindustrial.net/store/images/Delmhorst-F-2000-Hemp-Moisture-Meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/delmhorst-proscan-pinless-wood-moisture-meter-p-1829.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1829 ]]>Delmhorst PROSCAN Pinless Wood Moisture Meter Fast, accurate and non-destructive Handheld, compact, lightweight Easy-to-read digital display The Delmhorst Proscan is a non-invasive pinless moisture meter for flooring installers, lumber manufactures, woodworkers and building inspectors who want to quickly find moisture in wood products and a variety of building materials. The non-invasive meter is made in the USA and uses radio frequency signals to quickly scan wood, drywall, concrete or other building materials without damaging the sample. Its built-in species corrections for woods with a specific gravity between .30 and .80, makes checking a variety of wood species a cinch. With ProScan professionals can work with confidence, save time, stay on budget and avoid call-backs. Kit Contents Delmhorst PROSCAN Pinless Wood Moisture Meter Instructions Features Fast, accurate and non-destructive Handheld, compact, lightweight Easy-to-read digital display Quickly scan large areas to find moisture hot spots Calibrated to minimize false high readings Built-in battery/calibration checks Adjustable alarm alerts you when a preselected moisture level has been reached Advanced RF technology quickly scans wood and other building materials Hold function makes taking readings in hard-to-reach places fast and easy Built-in species corrections over the range of .30-.80 SG 0–100 reference scale for non-wood building materials Measures %MC on wood over the range of 5%–30% Rugged, one-piece sensor measures moisture 3/4" deep without damaging sample  Size: 5-5/8” x 3-5/16” x 1-1/4” Weight: 8.5 oz. One 9-volt battery included Rugged carrying case 1-year warranty. Accessories SCB-1 The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the SCB-1 from a wood or metal tabletop surface. When using the SCB-1. the meter should display 18.0, +/-1.0 on the wood scale, and 51, +/-2.0 on the Reference scale Downloads Delmhorst Proscan Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/delmhorst-proscan-pinless-wood-moisture-meter-p-1829.html Wed, 23 Nov 2022 20:57:58 +0000 USD 1829 Delmhorst 993 PROSCAN https://www.abqindustrial.net/store/images/Delmhorst-PROSCAN-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-g-79-gypsum-moisture-meter-p-1828.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1828 ]]>Delmhorst G-79 Gypsum Moisture Meter Easy-to-read analog display Measures moisture in gypsum using a three-range scale: (0.2%-1%, 1%-8%, and 8%-50%) Built-in battery and calibration check The Delmhorst G-79 Gypsum Moisture Meter was designed specifically to read a wide range of moisture on gypsum. One of our first meters to feature our exclusive gypsum scale, the G-79 is still a favorite for its large analog display and classic design. Kit Contents Delmhorst G-79 Gypsum Moisture Meter Instructions Features Easy-to-read analog display. Measures moisture in gypsum using a three-range scale: (0.2%-1%, 1%-8%, and 8%-50%). Built-in battery and calibration check. Auto-shutoff timer saves battery life. Size: 7 3/8” x 3 7/8” x 2 3/4”. Weight: 1 lb. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories & Electrodes 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick 496/24 496/100 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications: Home inspector: Use on wood joists and drywall. Paper producer: Use on curved surfaces such as cardboard and paper tubes. Woodworker: Use on timber, poles, and veneer. 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Downloads Delmhorst G-79 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-g-79-gypsum-moisture-meter-p-1828.html Tue, 18 Jun 2024 19:21:03 +0000 USD 1828 Delmhorst 991 G-79 https://www.abqindustrial.net/store/images/Delmhorst-G-79-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-tobacco-c-107_135_149/delmhorst-f-2000t-digital-moisture-meter-for-tobacco-p-1827.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1827 ]]>Delmhorst F-2000T Digital Moisture Meter for Tobacco. Bright, clear digital display Averages up to 100 accumulated readings Displays average and highest of accumulated readings The Delmhorst F-2000T Digital Moisture Meter for Tobacco is ideal for tobacco growers. The Delmhorst F-2000T shares many of its features with the F-2000 hay meter. Calibrated for Burley tobacco, the F-2000T is just what you need to produce a high-quality crop every time. Features Bright, clear digital display. Averages up to 100 accumulated readings. Displays average and highest of accumulated readings. Moisture Range: 8% to 37% on burley tobacco. Built-in calibration check. Audible, adjustable alarm alerts you when a pre-selected MC has been reached. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 3-year warranty Accessories 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately MCS-44 This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops 831 Short Pin Prod For testing hemp volume in containers. (requires H-4 Handle) H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing 22-E Comes with A-111 uninsulated contact pins for 7/16" penetration. For use in measuring moisture in the hemp flower Downloads Delmhorst F-2000T Digital Moisture Meter for Tobacco - Instruction Manual Delmhorst F-2000T Digital Moisture Meter for Tobacco - Conversion Chart Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-tobacco-c-107_135_149/delmhorst-f-2000t-digital-moisture-meter-for-tobacco-p-1827.html Tue, 09 Apr 2024 21:45:00 +0000 USD 1827 Delmhorst 974 F-2000T https://www.abqindustrial.net/store/images/Delmhorst-F-2000T-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-temperature-c-107_135_150/delmhorst-tm-100-digital-thermometer-tm-100w-cs-p-1826.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1826 ]]>Delmhorst TM-100 Digital Thermometer TM-100W/CS Bright, clear digital display Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC) Fast response time Delmhorst brings its characteristic quality and support to temperature monitoring. The Delmhorst digital thermometer features rugged construction to withstand even the toughest work conditions offering years of use. Not only does this device monitor temperature in the air, it can also take temperature readings inside of various building materials with the use of special Delmhorst electrodes such as the TS-102 Sensor Kit Contents Delmhorst TM-100 Digital Thermometer TM-100W/CS Instructions Features Bright, clear digital display. Temperature Range: -40ºF to 300ºF (-40ºC to 150ºC). Fast response time: 2 minutes for 63% excursion. 4-5 minutes full excursion. Can be used to check temperature in the air or in penetrable solids. Size: 2 3/4” x 4 3/4” x 1 3/4”. Weight: 8 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Electrodes PE-22 Probe Extension Used with TS-107 Sensor. Available in 3 ft. length SH-44 Handle Used with TS-107 Sensor TS-102 Sensor Used for liquids, gases, ambient temperature. Stainless steel probe length 5". Delrin handle TS-107 Sensor Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle Downloads Delmhorst TM-100 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a moisture meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Delmhorst customers in the woodworking/lumber industry know that moisture content is the single most important factor affecting the quality of their products. To ensure quality, from the mill and dry kiln to the finishing floor, Delmhorst moisture meters help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade lumber cannot make a difference if moisture content goes unchecked. Are there different types of moisture meters? There are two types of moisture meters commonly used in lumber and woodworking applications. A pin-type uses two pins that penetrate into wood at the users desired depth. Pin-type meters are the only instruments that indicate the moisture conditions inside a board or a piece of wood. Using insulated pins, only the uncoated tips are exposed to the wood fiber, providing more accurate readings of moisture content at various levels of penetration. Using a pin type meter with insulated pins is still the most effective method to determine moisture gradient, which is the difference between shell and core moisture content. Pinless moisture meters read moisture closest to the source of the magnetic field, in this case, at the surface. For quickly scanning finished product, a pin-less meter is a convenient way to identify a problem area. However, a pinless meter cannot differentiate between shell and core moisture content and will not detect a moisture gradient. Also, readings provided by a pinless meters are affected by surface moisture. Please refer to the diagram below for a basic look at the difference between readings obtained from a pin-type meter compared to a surface meter. This diagram illustrates that pin-type meters and surface meters provide different information about the moisture content in a board. Each technology may be appropriate for different applications. Before choosing a meter, it is important to understand these differences in readings and choose the type of meter best suited for your particular application. How does a moisture meter work? Using the principle of electrical resistance, pin-type meters use the board as an element in a circuit by driving two pins or electrodes into it. This method works because moisture conducts electricity well and dry wood is an effective insulator. Most pinless meters use the capacitance method, which uses the relationship between the moisture content and the dielectric properties of the wood. Both the resistance and the dielectric properties of wood change in direct proportion to its moisture content, within a specific range. In what range of moisture content do pin-type meters operate? Resistance-type meters express moisture content as a percentage of the oven-dry weight of the wood. These meters work best from the range of fiber saturation point (25 to 30 percent) down to around 6 percent. Below 6 percent, it's tough to make accurate, repeatable readings because of the high electrical resistance in really dry wood. This is particulary true at low relative humidity levels, generally below 30 percent. Electrical accuracy of all Delmhorst meters is better than 0.5 percent between 6 and 12 percent moisture content; better than 1 percent between 12 and 20 percent moisture content; and better than 2 percent between 20 and 30 percent, or at fiber saturation point. You can check accuracy either through the internal check or with a Moisture Content Standard. At what moisture content level do i minimize defects? Acceptable moisture content depends on the final use of the wood. Wood for fine furniture should be dried to 6 to 8 percent in most areas of the country, with very little variation among pieces and between the shell and core. Appropriate moisture content is also climate-driven. To determine the attainable moisture content - or equilibrium moisture content (EMC) - in your part of the country, hang small, thin samples of a wood species in your shop or plant and taking daily readings. When the samples' moisture content remains constant, they have reached the equilibrium level. This level will change from season to season, but you'll know the range within which to work. (Figure III) How do i determine the distribution of moisture in a board? Here's where Delmhorst recommends the use of a pin-type moisture meter. First, to determine how the moisture is moving through a board, make a series of shell readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. The Delmhorst 26-ES electrode with insulated pins is the easiest and surest way to detect a moisture gradient. Since the 26-E pinpoints are not insulated, two or three quick readings at different levels of penetration will indicate if the board is well seasoned, or properly dried. A normal gradient usually develops from the wetter core to the drier surface, with an average reading at between 1/4 to 1/5 of the board thickness. Even non-insulated pins, which measure the wettest fibers, will provide a good indication of how the wood is drying. If you are using non-insulated pins, push the pins just about 1/16" into the surface, read the meter, and then push the pins to their full depth. For kiln-dried stock, the final reading should be between 6 and 12 percent; with your first reading about 1 percent lower. For air-dried stock, the final reading is typically between 12 and 19 percent, with the first reading between 2 and 3 percent lower. Meter readings outside of these ranges indicate that the board is poorly seasoned. Pin-less meters scan through the cross section of a board taking into account the moisture in the entire penetrated area. If there is a high concentration of moisture at the surface, the reading will be skewed to reflect this surface moisture. If the surface is dry and core moisture exists, the readings will be lower than the representative moisture levels throughout the board. Does surface moisture skew a delmhorst meter reading? Moisture caused by exposure to rain, fog or high relative humidity is easily and accurately detected with insulated pins. If you're using non-insulated pins, push them 1/16" into the wood and read the meter. Then push them to their full penetration. The meter reading should increase by 1 to 2 points, just because of the greater contact. If there is no increase, or the increase is less than 1 percent, the wood is wet on the surface and the readings are unreliable. As described in the answer to the question above, readings taken with a surface meter are affected by surface moisture, making it difficult to determine if the surface moisture is a result of standing water caused by rain, or if it is representative of the moisture content throughout the board. How many measurements does delmhorst recommend for an accurate sampling? Accuracy of the readings depends on how representative the samples are of the entire load. In an ideal situation, when all the boards in a load have the same moisture content, and the distribution in each board is uniform, only a few readings are needed. But since this ideal condition doesn't often happen, start by checking a large percentage of pieces. If the readings are within close range, it's apparent that the load is fairly uniform. For critical use, check 5 or 10 percent of the load, and be sure to look at boards from all parts of the load. Check slower drying quarter sawn boards as well as flat sawn lumber. If you can only drive pins into the edge, be sure to use the longest pins available to reach the fibers as deep as the board is thick. The Delmhorst RDM series moisture meters with data collection and statistical analysis capabilities are ideal for simplifying the entire sampling procedure and providing backup documentation. How far should i drive non-insulated pins into wood? To full depth if possible. However, at moisture levels below 10%, it is usually sufficient to make good, positive contact with the wood. At higher levels of moisture and especially if you have a steep gradient, full penetration is a must. Otherwise you can have discrepancies between meter readings and actual moisture content of as much as 5 or 6 points, especially in the range above 20 percent. For best results in such cases, use insulated pins. Do i get the same reading if i use 2-pin insulated or 4-pin non-insulated electrodes? The original Delmhorst calibration was developed with a 4-pin electrode - four non-insulated steel needles, with 5/16" penetration - in samples with uniform moisture distribution. For greatest accuracy, a small correction is necessary when using electrodes with two insulated pins. The latest Delmhorst models available are calibrated either for the 2-pin electrode only, or are programmable for both 2-pin and 4-pin electrodes. How does temperature affect the accuracy of meter readings? After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C). In field use, no correction is necessary if the wood temperature is between 50° F and 90° F. If the temperature correction is not built in the meter, use the slide rule or chart we supply with each meter. The temperature of the wood does not affect pin-less type meters, unless the lumber is frozen. Are delmhorst meters accurate on frozen lumber? As long as the wood is not frozen solid and remains conductive, a pin-type meter will give reliable readings. However, most instrumentation, unless specifically designed for extreme weather conditions, will not work well in constant sub-freezing temperatures. How do delmhorst meters correct for species variation? When using a pin-type meter, all species yield different readings at the same moisture content. This is due to the fact that the electrical characteristics of different wood species vary. Delmhorst uses the USDA standard - Douglas Fir - as the basis for all calibrations. When using a Delmhorst meter on other species, either refer to the species correction chart, or key in your species into one of our microprocessor-based meters for an automatic correction. Pinless meters also yield different readings for different species. However, instead of electrical characteristics affecting the readings, wood density affects the readings. Refer to the species correction chart enclosed with your meter to adjust the readings accordingly. Does a group species correction provide an accurate meter reading? Species corrections are most accurate when handled as an individual correction, either through the a species correction chart, or automatically, through software. While not as accurate as individual corrections, the group correction is adequate for practical purposes, as long as the correction is close to the individual factor for the species. What about exotic species or other species not on the charts? If the species correction is simply not available, you can take readings below 10 percent at face value. Any correction is so small that depending on the application; a correction may not be necessary. A good moisture meter is still valuable, even without a correction factor because you can use it to determine the equilibrium moisture content (EMC). A meter reading by itself is not always as important as allowing the wood to attain its EMC level where it won't change dimension, crack, or split. Does the glue used in plywood affect meter accuracy? In most cases, no. To verify this, use insulated pins to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the meter on plywood as you would any solid material and take the readings at face value, without species correction. What about the chemicals in treated lumber? Recent studies have shown that you can use a Delmhorst meter with confidence at the treating plant, job site, or when the wood is in service if the preservative is a "C oxide" formulation (CCA-C) widely used today. Our experience has shown that at higher moisture content levels (above 20 percent), chemically treated lumber tends to yield somewhat erratic readings. What about particleboard and other manufactured materials? Chemical additives may or may not affect meter readings. Use the meter to make qualitative, comparative readings. If greater accuracy is required, Delmhorst can help you to develop a specific calibration. How do delmhorst meters handle readings on rough-surfaced lumber and cupped boards? With a pin-type meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pin-less meters, however, need full exposure to a flat surface so their readings on some uneven surfaces may be unreliable. Are there board width limitations in using moisture meters? Board width is not a limiting factor when using a pin type moisture meter. As long as the pins make good contact, the meter can be used on anything from small dowels to wide planks. For accurate results with a pinless meter, the material you're testing must be at least the width of the scanning area on the bottom of the meter. What happens if i bring a delmhorst meter into a dry kiln? Moisture meters, like most precision instruments, are sensitive to moisture. We do not recommend taking a meter into a kiln, especially from cold surroundings. If you must, take a few minutes to warm up the meter and electrode to a maximum 100°F, so that the higher temperature and moisture levels in the kiln will not affect the meter for a few minutes. If you don't acclimate the meter, readings will be erratic at best. While Delmhorst meters are built for the harsh mill environment, continued exposure to high heat and humidity will invite corrosion and shorten the life of a meter's keypad, display and PC board components. How can i monitor moisture content during drying without going into the kiln? Use the Delmhorst Kil-Mo-Trol, a remote probe system that measures the moisture content of lumber during the drying process. Resistance probes or contact pins are located at various "stations" throughout the lumber packages to monitor shell and core or core only moisture content readings. This technique is proven for both hardwood and softwood drying, and can be used in any type of dry kiln, pre-dryer, or air-drying operation. For more information about Kil-Mo-Trol, please close this window and click on the Kil-Mo-Trol Moisture Monitor button. How does static electricity affect meter readings? In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. Depending on the conditions, any one of them can work, either alone or in combination with another. Why do meter readings not always agree? If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary. Assuming both meters are electrically correct, the difference usually can be attributed to use of different electrodes, pin penetration, and species and temperature corrections. When meters are used for lumber inspections by vendors and buyers, the two parties should have a basis for comparing readings obtained with the instruments they are using. How do i keep a delmhorst meter in good working condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-temperature-c-107_135_150/delmhorst-tm-100-digital-thermometer-tm-100w-cs-p-1826.html Wed, 16 Nov 2022 23:03:53 +0000 USD 1826 Delmhorst 1000 TM-100 https://www.abqindustrial.net/store/images/Delmhorst-TM-100-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-soil-c-107_135_148/delmhorst-ks-d1-soil-moisture-meter-p-1825.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1825 ]]>Delmhorst KS-D1 Soil Moisture Meter Bright, clear digital display Moisture Range: 0.1 - 15 Bars Tension 0-100 reference scale The Delmhorst KS-D1 Digital Soil Moisture Tester, used with the GB-1 Gypsum Sensor Blocks, make up a valuable system to monitor the soil moisture available to the plants. This system eliminates guesswork, so that irrigation can be effectively scheduled, according to plants' requirements Kit Contents Delmhorst KS-D1 Soil Moisture Meter Instructions Features Bright, clear digital display. Moisture Range: 0.1 - 15 Bars Tension. 0-100 reference scale. Spring-loaded binding posts allow for positive contact with the gypsum sensor blocks' leads. Built-in calibration check. Size: 2 3/4” x 4 3/4” x 1 3/4”. Weight: 8 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Electrodes GB-1 Gypsum Sensor Blocks The blocks are made of gypsum, cast around two concentric, stainless steel electrodes. They are manufactured under controlled conditions to obtain a maximum degree of uniformity and fast response to soil moisture changes. The GB-1 measures 7/8” dia. x 1 1/8” in height. It is the most widely used sensing unit, easy to install and especially suited for extensive sampling of soil at various depths. Downloads Delmhorst KS-D1 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-soil-c-107_135_148/delmhorst-ks-d1-soil-moisture-meter-p-1825.html Wed, 16 Nov 2022 22:58:39 +0000 USD 1825 Delmhorst 999 KS-D1 https://www.abqindustrial.net/store/images/Delmhorst-KS-D1-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hops-c-107_135_147/delmhorst-g-34-hops-moisture-meter-p-1824.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1824 ]]>Delmhorst G-34 Hops Moisture Meter Easy-to-read analog display Moisture Range: 7%-14% on hops Built-in battery and calibration check. The Delmhorst G-34 Hops Moisture Meter lets you easily check moisture levels in baled hops to assure high-quality harvest and safe storage. The large analog display and built-in battery check make this a favorite among hop growers worldwide. Kit Contents Delmhorst G-34W/CS Hops Moisture Meter Delmhorst G-34 Hops Moisture Meter Carrying Case Instructions Delmhorst G-34/PKG Hops Moisture Meter, Standard Package Delmhorst G-34 Hops Moisture Meter H-4 Handle - Electrode handle 830-5 12" Prod for testing standard and high density bales Carrying Case Instructions Features Easy-to-read analog display Moisture Range: 7%-14% on hops. Built-in battery and calibration check. Auto-shutoff timer saves battery life. Size: 7 3/8” x 3 7/8” x 2 3/4”. Weight: 1 lb. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories & Electrodes MCS-44 This moisture content standard is great for verifying that your G-34 hops moisture meter is in calibration. With two electrical resistance values (8% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-44 is also available with a letter of certification traceable to NIST. 30-E/C Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod  830-4 – 36” prod 830-5 – 12” for hops H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing Downloads Delmhorst G-34 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hops-c-107_135_147/delmhorst-g-34-hops-moisture-meter-p-1824.html Wed, 16 Nov 2022 22:49:08 +0000 USD 1824 Delmhorst 988 G-34 https://www.abqindustrial.net/store/images/Delmhorst-G-34-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-grain-c-107_135_146/delmhorst-g-7-grain-moisture-meter-p-1823.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1823 ]]>Delmhorst G-7 Grain Moisture Meter Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat. Built-in temperature correction over the range of 32 - 160° F (0 - 70° C). Programmable offset to match elevator. The Delmhorst G-7 is a rugged resistance-type meter, great for testing the moisture content of grain at harvest time and while in storage. The integral double-disc electrode cup holds only 3-4 grams, allowing for more uniform sampling and providing accurate and repeatable readings. You can even attach optional accessories to check moisture in bulk material and hay. The G-7 also provides useful statistics on stored readings Kit Contents Delmhorst G-7 Grain Moisture Meter Instructions Features Built-in calibrations for barley, coffee, corn, flax, hay, oats, pasta, rapeseed, rough rice, rye, sorghum, soybeans, and wheat. Built-in temperature correction over the range of 32 - 160° F (0 - 70° C). Programmable offset to match elevator. Stores up to 150 accumulated readings in user-defined batches by grain. Displays the average and highest readings, and standard deviation and co-efficient of variance of stored readings. Audible, adjustable alarm alerts you when a pre-selected MC has been reached. Built-in connector accepts any Delmhorst electrode. Built-in calibration check. Moisture Range: 9%-30% MC, depending on the grain. Size: 7 1/4” x 6” x 5 1/2”. Weight: 4 lbs. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories & Electrodes 303BRU-0012 Brush used to clear off 313CUP-0005 or 313CUP-0006 sample cups 324CAS-0016 This sturdy plastic carrying case fits the G-7 grain moisture meter. This case can be ordered separately 1900 The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup 313CUP-0005 Sample Cup The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly 313CUP-0006 Sample Cup The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly 315ELE-0024 The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod  830-4 – 36” prod 830-5 – 12” for hops 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle) 832 Long pin prod – for testing grain in bulk (requires H-4 Handle) H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing Downloads Delmhorst G-7 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-grain-c-107_135_146/delmhorst-g-7-grain-moisture-meter-p-1823.html Wed, 23 Nov 2022 20:24:01 +0000 USD 1823 Delmhorst 998 G-7 https://www.abqindustrial.net/store/images/Delmhorst-G-7-moisture-meters.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-cotton-c-107_135_144/delmhorst-c-2000-digital-moisture-meter-for-cotton-p-1822.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1822 ]]>Delmhorst C-2000 Digital Moisture Meter for Cotton Bright, clear digital display Four separate scales for testing lint cotton, seed cotton, wool and viscose/rayon Includes meter, and carrying case. Order as C-2000W/CS The Delmhorst C-2000 Moisture Meter is designed primarily to check the moisture content (%MC) in lint cotton and seed cotton. Versions 2.0 and higher include scales for viscose rayon and wool Kit Contents Delmhorst C-2000 Moisture Meter Instructions Features Bright, clear digital display. Four separate scales for testing lint cotton, seed cotton, wool and viscose/rayon. Audible, adjustable alarm alerts you when your pre-selected MC has been reached. Averages up to 100 accumulated readings. Built-in calibration check. Moisture Range: 4%-16% on lint cotton; 6%-20% on seed cotton; 12.3%-25.2% on wool and 6%-22.4% on viscose/rayon. Built-in connector accepts any Delmhorst electrode. Size: 8" x 3" x 1 5/8". Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year Warranty Accessories & Electrodes MCS-COTTON This moisture content standard is great for verifying that your C-2000 cotton moisture meter is in calibration. 30-E/C Used for bales, 9 1/2" insulated pins, with 8 1/4" penetration, eliminates the effect of surface moisture 37-E/C Used for yarn, 1 1/2" pins with 1" penetration 52-E/C Cup type electrode used for lint or seed cotton 830-T/C Used for modules, heavy duty steel, 36" T-handle Downloads Delmhorst C-2000 Moisture Meters - Instruction Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-cotton-c-107_135_144/delmhorst-c-2000-digital-moisture-meter-for-cotton-p-1822.html Tue, 09 Apr 2024 21:33:52 +0000 USD 1822 Delmhorst 967 C-2000 https://www.abqindustrial.net/store/images/Delmhorst-C-2000-moisture-meters.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf-positector-sst-soluble-salt-tester-posipatch-kit-and-probe-only-p-1821.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1821 ]]>DeFelsko SSTKITPF PosiTector SST Soluble Salt Tester PosiPatch Kit & Probe Only (Gauge not Included) Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Long Form Certificate of Calibration showing traceability to NIST included. DeFelsko SSTKITPF PosiTector SST Soluble Salt Tester PosiPatch Kit is ideal for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITPF Probe Only Soluble Salt Tester Kit includes: PosiTector SST Probe PRBSST PosiPatch (5) Flexible Magnetic Ring Syringe and Plastic Tip (2) 250 ml DI Water and Cup (5) Foam swabs (5) PosiSoft Software Certified conductivity standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Full Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf-positector-sst-soluble-salt-tester-posipatch-kit-and-probe-only-p-1821.html Wed, 23 Nov 2022 04:52:30 +0000 USD 1821 DeFelsko 996 SSTKITPF https://www.abqindustrial.net/store/images/DeFelsko-SSTKITF-PosiTector-SST-Soluble-Salt-Tester.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf3-g-positector-sst-soluble-salt-tester-posipatch-advanced-kit-p-1820.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1820 ]]>DeFelsko SSTKITPF3-G PosiTector SST Soluble Salt Tester PosiPatch Standard Kit with PosiTector Advanced Gage Body, PosiTector SST Probe, PosiPatch (5), Flexible Magnetic Ring*, Syringe and Plastic Tip (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITF3 Advanced Soluble Salt Tester Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SST Probe PRBSST PosiPatch (5) Flexible Magnetic Ring Syringe and Plastic Tip (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity Standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf3-g-positector-sst-soluble-salt-tester-posipatch-advanced-kit-p-1820.html Wed, 23 Nov 2022 05:06:14 +0000 USD 1820 DeFelsko 1000 SSTKITPF3-E https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitpf-advanced.jpeg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf1-g-positector-sst-soluble-salt-tester-posipatch-standard-kit-p-1819.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1819 ]]>DeFelsko SSTKITPF1-G PosiTector SST Soluble Salt Tester PosiPatch Standard Kit with PosiTector Standard Gage Body, PosiTector SST Probe, PosiPatch (5), Flexible Magnetic Ring*, Syringe and Plastic Tip (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof The DeFelsko SSTKITPF1-G PosiTector SST Soluble Salt Tester is ideal for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITF1 Standard Soluble Salt Tester Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SST Probe PRBSST PosiPatch (5) Flexible Magnetic Ring Syringe and Plastic Tip (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe—stored readings can be viewed or downloaded Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitpf1-g-positector-sst-soluble-salt-tester-posipatch-standard-kit-p-1819.html Wed, 23 Nov 2022 05:09:39 +0000 USD 1819 DeFelsko 996 SSTKITPF1-E https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitpf.jpeg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/paint-test-equipment-x3001-digital-adhesion-tester-p-1818.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1818 ]]>X3001 Digital Adhesion Tester (Standard) 0–20MPa (0–3000psi) The Adhesion Tester is compliant to ISO 4624 and ISO 16276-1. Gauge accuracy 0.05%FSD. The X3001 Adhesion Tester measures the adhesion pull-off of applied coatings. The X3001 is Fitted with a GE Druck DPI 104 digital pressure gauge.Adhesion Tester Models are available with an Intrinsically safe GE Druck DPI 104-IS digital pressure gauge (ATEX and IECEx approval). The X3001 Adhesion Tester is supplied in an industrial Carrying Case with 5 Flat Dollies, Turbo Fuse Adhesive, Heated Dolly Remover, Dolly Cleaning Tool, Dolly Plug.The Adhesion Tester Calibration Certificate with traceability to UKAS is an optional extra. The X3001 is compliant to ISO 4624 and ISO 16276-1. Also known as Pull-Off Adhesion Tester, Hydraulic Adhesion Tester and HATE Adhesion Tester. Features The adhesion is measured by the tensile pull on a Dolly glued to the coating surface.The force is applied through the centre of the Dolly by a hydraulically loaded pin.This ensures an exactly central point-loading of the force. The Right Angle version of the Adhesion Tester enables the user to test the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”). Gauge accuracy 0.05%FSD. Downloads Paint Test Equipment X3001 Digital Adhesion Tester- Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/paint-test-equipment-x3001-digital-adhesion-tester-p-1818.html Mon, 21 Aug 2023 22:04:07 +0000 USD 1818 Paint Test Equipment 999 X1001 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-Digital-Adhesion-Tester.jpg https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-r1004-testex-gauge-kit-p-1817.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1817 ]]>R1004. Testex Gauge Includes Testex Tape Coarse & Testex Tape X Coarse Compliant to ISO 8503-5 and NACE SP0287 Testex Gauge with the Testex Tape will measure the surface profile of blast-cleaned steel. NACE compliant Testex Tape. Compliant to ISO 8503-5 and NACE SP0287. Also known as Testex Thickness Gauge and Testex Profile Gauge Kit Contents Paint Test Equipment R1004 Testex Gauge Testex Tape X Coarse Testex Tape Coarse Burnishing Tool Calibration Certificate with traceability to UKAS Carrying Case Features Testex Tape measurements are made by placing the replicated area between the anvils and gently lower the moveable anvil onto the film The reading can now be taken, giving you the average peak-to-valley height of the blasted profile. Gauge accuracy ±1%FSD Downloads Paint Test Equipment R1004 Testex Gauge - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-r1004-testex-gauge-kit-p-1817.html Sun, 21 Nov 2021 14:44:21 +0000 USD 1817 Paint Test Equipment 987 R1004 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-R1004-Testex-Gauge.jpg R1004. Testex Gauge.

---

Includes Testex Tape Coarse & Testex Tape X Coarse

---

Compliant to ISO 8503-5 and NACE SP0287.

---

]]> https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-surface-roughness-comparator-p-1816.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1816 ]]>R2006 Surface Roughness Comparator Grit R2007 Surface Roughness Comparator Shot Compliant to ISO 8503-1 and ISO 8503-2 Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator. Surface Roughness Comparator for grit and shot-blast surface roughness comparison measurement of  blast-cleaned steel. The Surface Roughness Comparator is supplied in a protective Wallet. An X5 Illuminated Magnifier for viewing the Comparator is available as an optional extra. Compliant to ISO 8503-1 and ISO 8503-2. Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator Features When steel has been blast-cleaned, the surface consists of random irregularities with peaks and valleys that are not easily characterised. Because of this random nature, it is recommended that the profile should be identified as either angular (where grit abrasives have been used) or dimpled (where shot abrasives have been used) and that they should be graded as fine, medium or coarse using the four segments on the Comparator. Fine-grade profiles equal to segment 1 and up to but excluding segment 2. Medium-grade profiles equal to segment 2 and up to but excluding segment 3. Coarse-grade profiles equal to segment 3 and up to but excluding segment 4. Downloads Paint Test Equipment R2006. Surface Roughness Comparator Grit - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-surface-roughness-comparator-p-1816.html Sun, 21 Nov 2021 14:48:03 +0000 USD 1816 Paint Test Equipment 945 R2006 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-R2006-Surface-Comparator.jpg R2006 Surface Roughness Comparator Grit
R2007 Surface Roughness Comparator Shot

---

Compliant to ISO 8503-1 and ISO 8503-2

---

Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator.

---

]]> https://www.abqindustrial.net/store/industrial-maintenance-c-102/glossmeters-c-102_53/paint-test-equipment-e2001-electrostatic-gun-high-voltage-meter-p-1815.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1815 ]]>Paint Test Equipment E2001 Electrostatic Gun High Voltage Meter Electrostatic Gun High Voltage Meter will measure electrostatic spray gun high voltages and discharge currents Measurement accuracy ±1%. Paint Test Equipment E2001 Electrostatic Gun High Voltage Meter will measure electrostatic spray gun high voltages and discharge currents. With the Electrostatic Gun High Voltage Meter, the electrostatic sprayer can now quickly measure the voltage at the spray gun tip.  This corona point is where the electrostatic voltage must be maintained at the correct voltage. Supplied in an industrial Carrying Case with High Voltage Measuring Probe, Current Test Cable and Earth Cable. Calibration Certificate with traceability to UKAS is an optional extra. Features There can be many reasons why the spray gun voltage may not be correct: poor calibration, dirt and grease contamination, poor cable connections, and cable breakages, all of which could affect the actual gun voltage but not be shown on the spray equipment displays.  The Electrostatic Gun High Voltage Meter offers a safe, simple and quick test to establish the correct voltage and is particularly useful for multi-gun systems. The ability to accurately measure the discharge current during spraying is very important.  The Electrostatic Gun High Voltage Meter enables the operator to determine the optimum gun position and to detect the amount of powder applied before back-ionisation occurs.  This is useful to allow spray gun systems with a set discharge current control to be quickly and easily tested. Measurement accuracy ±1%. Downloads Paint Test Equipment E2001 Electrostatic Gun High Voltage Meter - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/glossmeters-c-102_53/paint-test-equipment-e2001-electrostatic-gun-high-voltage-meter-p-1815.html Mon, 26 Jun 2023 16:45:18 +0000 USD 1815 Paint Test Equipment 999 E2001 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-E2001-Electrostatic-Gun-Meter.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/paint-test-equipment-ps102-potassium-ferricyanide-test-papers-p-1814.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1814 ]]>PS102. Potassium Ferricyanide Test Papers (pack of 100) Spray a film of Deionised Water on an area of the blast-cleaned steel The Test Paper is then held against the surface for approximately 10 seconds The Paint Test Equipment PS102 Potassium Ferricyanide Test Papers is ideal to detect iron salts that form at the bottom of rust pits on blast-cleaned steel. If these iron salts are present, they rapidly induce corrosion. The test involves the reaction of soluble ferrous iron salts with potassium ferricyanide to form ferric hexacyanoferrate, which is commonly known as Prussian blue.  The relatively high tinting strength of Prussian blue enables the reaction to be used as a very sensitive test on ferrous irons. Supplied in packs of 100 Papers Features Spray a film of Deionised Water on an area of the blast-cleaned steel.  The Test Paper is then held against the surface for approximately 10 seconds.  Any soluble iron salts present are drawn out of the rust pits by capillary action and react with the potassium ferricyanide to form blue spots.  The presence of blue spots on the Test Paper indicates that the surface should be re-blasted We would recommend that the Test Papers are used within a 6-month period from the date of purchase Downloads Paint Test Equipment PS102 Potassium Ferricyanide Test Papers - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/paint-test-equipment-ps102-potassium-ferricyanide-test-papers-p-1814.html Thu, 30 Sep 2021 18:18:40 +0000 USD 1814 Paint Test Equipment 981 PS102 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-PS102-Potassium-Ferricyanide-Papers.jpg PS102. Potassium Ferricyanide Test Papers (pack of 100)

---

Spray a film of Deionised Water on an area of the blast-cleaned steel

---

The Test Paper is then held against the surface for approximately 10 seconds

---

]]> https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/paint-test-equipment-p4001-dust-test-tape-dust-test-charts-pack-of-50-p-1813.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1813 ]]>Paint Test Equipment P4001 Dust Test Tape & Dust Test Charts, Pack of 50 Compliant to ISO 8502-4. The Paint Test Equipment P4001 Dust Test using the Dust Test Tape and Dust Test Charts will allow you to assess the quantity and size of dust particles on blast-cleaned steel. Dust particles on blast-cleaned steel surfaces may reduce the adhesion of applied coatings, and by absorbing moisture may promote the corrosion of the steel surface. All items are supplied in an industrial Carrying Case with Dust Test Tape (60m), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier. Compliant to ISO 8502-3 Features Accumulation of dust particles occurs more naturally on horizontal surfaces, the interior of pipes and in structural cavities. Inspection should be carried out to ensure that such areas are adequately cleaned and free from dust particles before painting The pressure-sensitive Dust Test Tape is pressed onto the steel surface prepared for painting. The Tape with the dust particles adhering to it is removed and placed on the Dust Test Chart in a section which contrasts to that of the dust particles and is examined visually. The quantity of dust particles adhering to the Tape and the dust particle size is then compared The Dust Test Chart shows 5 classifications of dust particles and 4 sections of contrasting backgrounds where the Tape can be applied. All details necessary to identify the surface tested can be written on the Char Downloads Paint Test Equipment P4001 Dust Test - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/paint-test-equipment-p4001-dust-test-tape-dust-test-charts-pack-of-50-p-1813.html Thu, 30 Sep 2021 18:18:22 +0000 USD 1813 Paint Test Equipment 998 P4001 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-Dust-Test-P4001.jpg P4001. Dust Test. Includes Dust Test Tape & Dust Test Charts (pack of 50)

---

Compliant to ISO 8502-4.

---

]]> https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/dew-point-meters-c-103_166/paint-test-equipment-h4001-dewpoint-meter-p-1812.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1812 ]]>Paint Test Equipment H4001 Dewpoint Meter 0–100%rh/-10 to 70°C (14 to 160°F). Including Humidity Sensor & Surface Temp Probe Measurement accuracy ±2% Compliant to ISO 8502-4 The Paint Test Equipment H4001 Dewpoint Meter enables testing for the estimation of the probability of condensation on a surface to be painted and establishing whether conditions at the job site are suitable for painting or not. The steel surface temperature generally should be at least 3°C above the dew point when paints are applied. Below this temperature, the Dewpoint Meter will sound an alarm and the display colour will change to warn you that the surface conditions are not suitable to paint. Compliant to ISO 8502-4. Also known as Hygrometer, DIgital Hygrometer, Relative Humidity Meter, RH% Meter and Dew Check. Kit Contents Paint Test Equipment H4001 Dewpoint Meter Humidity Sensor Surface Temperature Probe Carrying Case Features Measurements of relative humidity, dew point and air temperature are shown. Surface temperature and surface temperature proximity to dew point are shown when using the surface temperature sensor. Interchangeable Humidity Sensor and Surface Temperature Probe allow the user to replace damaged or out-of-calibration-date Sensor and Probe. Measurement accuracy ±2% Downloads Paint Test Equipment H4001 Dewpoint Meter - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/dew-point-meters-c-103_166/paint-test-equipment-h4001-dewpoint-meter-p-1812.html Sun, 21 Nov 2021 17:34:05 +0000 USD 1812 Paint Test Equipment 998 H4001 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-Dewpoint-Meter-H4001.jpg H4001. Dewpoint Meter 0–100%rh/-10 to 70°C (14 to 160°F). Including Humidity Sensor & Surface Temp Probe

---

Measurement accuracy ±2%.

---

Compliant to ISO 8502-4.

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-walls-and-roofs-c-107_137_161/tramex-me5-moisture-encounter-non-destructive-moisture-meter-p-1811.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1811 ]]>Tramex ME5 Moisture Encounter Dual-Depth 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings. The Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter is a Dual-Depth, non-destructive moisture meter for instant moisture measurement and evaluation. Deep Depth penetration up to 1.25" (30mm) & Shallow Depth penetration up to 0.40” (10mm). 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry, making the Moisture Encounter ideal for testing in and through a wide range of materials in the building envelope. The Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter detects and evaluates moisture conditions within various building materials by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture in the material under test. The Tramex ME5 Moisture Encounter determines the strength of the current and converts this to a moisture content value, displaying it on a large clear analog dial. Kit Contents The Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter includes everything needed for testing: Tramex ME5 Moisture Encounter Tramex ALLPOUCH5 Single Meter Case​ Free App available for Android and iOS Operating Instructions Certificate of Calibration One (1) year warranty Features 5 Ranges of sensitivity: Wood & Timber / Shallow Depth / Drywall & Roofing / Plaster & Tile / Masonry Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings. Deep signal penetration, up to 1 1⁄4" (30mm) in wood and drywall, detects elevated moisture through most covering materials without having to damage or puncture the materials being tested. Shallow Depth scale is designed to have a field penetration of up to 10mm (0.4 inches). Wide range of readings from 5% to 30% on Wood Scale and 0 to 100 on comparative scale for all other materials. Detects moisture through paint, wallpaper, drywall, ceramic tiles, floor coverings, wood, ceiling tiles, roofing membranes, and asphalt composition shingles. Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.  Hold Function which enables the user to “freeze” the reading, useful when taking readings where the meter face may not be visible. High Moisture Audio Warning Tone which can be enabled or disabled. Large clear easy to read analog display giving meaningful readings. Rugged ergonomically designed enclosure. Specifications Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight  9.5oz (270g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration Shallow signal: up to 0.40” (10mm) Deep signal up to 1.25" (30mm) Wood Moisture Content 5 to 30% Reference scale for building materials 0 to 100 More Info Dual Depth Moisture Meter The Dual Depth feature of the Tramex ME5 Moisture Encounter Non-Destructive Moisture Meter makes it possible to determine where the moisture is located within the material. The shallow-depth readings, up to ⅜” (10mm),and deep-depth readings, up to 1¼" (30mm), can be used to compare surface moisture and core moisture and eliminate the influence of the substrate when testing coverings. This general moisture meter detects moisture through paint, wallpaper, drywall, ceramic tiles, floor coverings, wood, ceiling tiles, roofing membranes, and asphalt composition shingles and makes it the best moisture meter for testing in, through and behind a wide range of building materials. Moisture Mapping & Data Documentation Concrete moisture test results can be visualized with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos. Uses Used and trusted by generations of professionals worldwide for the purpose of: Locating moisture-related problems within and behind a variety of building materials in the building envelope. Mapping the extent of moisture damage caused to buildings. Monitoring progressive drying conditions in the drying process of building materials and surfaces. Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings. Related Products Tramex WDIK Water Damage Restoration Inspector Kit Industry: Water Damage Restoration Tramex WDMK Water Damage Restoration Master Kit Industry: Water Damage Restoration Tramex WDTK Water Damage Restoration Tech Kit Industry: Water Damage Restoration Tramex FMK Flooring Master Kit Industry: Flooring Inspection, Flooring Installation. Tramex AP-ME Accessory Pack for Moisture Encounter 5 The Accessory Pack for the Moisture Encounter 5 consists of a Calibration Check Plate, an extension handle and a handy holster pouch for the ME5 Order Code: AP-ME Tramex E5-HBS Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Tramex AP-F2170 ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Downloads Tramex ME5 Moisture Encounter- Quick Guide Tramex ME5 Moisture Encounter- Instruction Manual Tramex ME5 Moisture Encounter- Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-walls-and-roofs-c-107_137_161/tramex-me5-moisture-encounter-non-destructive-moisture-meter-p-1811.html Tue, 26 Sep 2023 16:57:49 +0000 USD 1811 Tramex 748 ME5 https://www.abqindustrial.net/store/images/Tramex-ME5-Moisture-Encounter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cme5-concrete-moisture-encounter-non-destructive-moisture-meter-p-1810.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1810 ]]>Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter Clear easy-to-read analog dial Instant and precise readings to a depth of approximately  3/4" into the slab. Reproducible and reliable results The Tramex CME5 Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds. Easy-to-use, giving precise and repeatable results, the Concrete Moisture Encounter allows the user to make multiple tests over a large area in the shortest possible time. The Tramex CME5 Concrete Moisture Encounter detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Tramex CME5 Concrete Moisture Encounter determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial. The Tramex CME5 Concrete Moisture Encounter also provides readings for gypsum floor screeds as well as comparative readings making this moisture meter suitable to perform a concrete moisture test as per ASTM F2659.  Kit Contents The Tramex CME5 Concrete Moisture Encounter Non Destructive Moisture Meter includes everything needed for testing: Tramex CME5 Concrete Moisture Encounter​ Tramex ALLPOUCH5 Single Meter Case​ Free App available for Android and iOS Operating Instructions​ Certificate of Calibration​ One (1) year warranty Features Non-destructive in operation with no need to probe, drill or mechanically damage the surface. Clear easy-to-read analog dial. Instant and precise readings to a depth of approximately  3⁄4" into the slab. Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.  Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data. Reproducible and reliable results. Spring-loaded contact pins compensate for uneven concrete and boost signal penetration. Rugged ergonomically designed enclosure. Specifications Size 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) Weight 12.1oz (344g) Construction ABS Body Power 2 x AALR6 ALKALINE (included) Display Analogue Depth of penetration approx. ¾" (20 mm) Moisture Content for Concrete 0 to 6 % Comparative for Gypsum floor screed 0 to 10 Reference scale 0 to 100 Mode Info The Tramex CME5 Concrete Moisture Encounter is a top quality concrete moisture meter and an essential tool for non-destructive testing of concrete for professionals in the concrete coatings or flooring industry to help prevent moisture problems on concrete floors. The use of the Tramex CME5 Concrete Moisture Encounter can be extended with the optional Tramex CDK Concrete Determinator Moisture Probe which detects in-situ quantitative moisture content within the concrete down to an extendable depth of up to 4" (100mm). Moisture Mapping & Data Documentation Concrete moisture test results can be visualized with the Tramex Meters App and turned into moisture maps, reports and charts for sharing. Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos. Concrete Moisture Meter Design The Tramex Concrete Moisture Encounter CME5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Tramex CME5 concrete moisture meter determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial. Concrete Moisture Meter - Operating procedure To carry out tests simply brush any dust from a smooth area of concrete and also from the electrodes, switch on the CME5 concrete moisture meter and place it firmly onto the surface, fully compressing the spring-loaded, signal-enhancing contacts on the base. Read the moisture content from the clear analogue dial. The Tramex Concrete Moisture Encounter CME5 is calibrated to give percentage moisture content readings on clean, bare dust free concrete floor slabs, with a depth of penetration of approx. ¾" (20 mm). Readings taken on concrete slabs through paint, coatings, adhesives or other materials on the surface should be regarded as qualitative or comparative and not quantitative. Related Products Tramex WDTK Water Damage Restoration Tech Kit Industry: Water Damage Restoration Tramex CCTK Concrete Coatings Tech Kit Industry: Flooring Inspection, Concrete Coatings, Water Damage Restoration Tramex FTK Flooring Tech Kit Industry: Flooring Inspection, Flooring Installation Tramex CDK Concrete Determinator Moisture Probe Providing In-Situ Moisture Content Readings In A Tramex Unified Moisture Content Test Method Tramex Accessory Pack for Concrete Moisture Encounter 5 and 5X For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex CALCRH Calibration Check for CME5, CMEX5 The Tramex CALCRH is a calibration check plate used to easily verify if moisture meters yield proper moisture readings, or if or needs to be sent to a calibration lab. Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use withMRH3 Order Code: HH14SP90 For use withCMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Tramex Extension Handle for ME5, CME5 and CMEX5  The Extension Handle can be used with the ME5, CME5 and CMEX5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling. Order Code: E5-HBS Downloads Tramex CME5 Concrete Moisture Encounter - Quick Guide Tramex CME5 Concrete Moisture Encounter - Instruction Manual Tramex CME5 Concrete Moisture Encounter - Data Sheet Tramex Meters App - Getting Started & Moisture Mapping Tramex Meters App - Visualizing, Photographing and Geo-tagging Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/tramex-cme5-concrete-moisture-encounter-non-destructive-moisture-meter-p-1810.html Wed, 16 Aug 2023 01:45:16 +0000 USD 1810 Tramex 868 CME5 https://www.abqindustrial.net/store/images/Tramex-CME5-Concrete-Moisture-Encounter.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-spi13-749-7-electronic-depth-pit-gauge-gal-spi13-749-7-p-1809.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1809 ]]>G.A.L. Gage Co. Cat # SPI13-749-7 Electronic Depth / Pit Gauge GAL SPI13-749-7 Measurement Scale: Inch / Metric Manufacturer: G.A.L. Gage Company Warranty: One Year Large LCD - 0.0005" (0.01mm) Resolution, ±0.001" (0.025mm) Accuracy, 0.06" Dia Probes, 2 3/8" Base, Kit Contents G.A.L. Gage Co. GAL SPI13-749-7 Electronic Depth / Pit Gauge Fitted Case & Battery Included Certificate of Calibration Traceable to NIST Measurement Scale: Inch / Metric Downloads G.A.L. Gage Co. Cat # SPI13-749-7 Electronic Depth / Pit Gauge GAL SPI13-749-7 - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-spi13-749-7-electronic-depth-pit-gauge-gal-spi13-749-7-p-1809.html Mon, 21 Feb 2022 21:44:10 +0000 USD 1809 G.A.L. Gage Co. 966 GAL-SPI13-749-7 https://www.abqindustrial.net/store/images/GAL-SPI13-749-7.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-31-multi-purpose-welding-gauge-gal-31-p-1808.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1808 ]]>G.A.L. Gage Co. Cat # 31 Multi-Purpose Welding Gauge GAL-31 Measurement Scale: Metric Manufacturer: G.A.L. Gage Company Warranty: One Year Multi-Purpose Welding Gauge Features Butt Weld Height Weld Leg Weld Throat  Width of Weld Seam Bevel Angle Under Cut  Gap Size Specifications Gauge Measures 7.62 cm x 6.35 cm • 3" x 2.5" Downloads G.A.L. Gage Co. Cat # 31 Multi-Purpose Welding Gauge GAL-31 - Data Sheet G.A.L. Gage Co. Cat # 31 Multi-Purpose Welding Gauge GAL-31 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-31-multi-purpose-welding-gauge-gal-31-p-1808.html Mon, 26 Jun 2023 16:43:48 +0000 USD 1808 G.A.L. Gage Co. 999 GAL-31 https://www.abqindustrial.net/store/images/GalGage-31.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-30-multi-purpose-welding-gauge-gal-30-p-1807.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1807 ]]>G.A.L. Gage Co. Cat # 30 Multi-Purpose Welding Gauge GAL-30 Measurement Scale: Inch Manufacturer: G.A.L. Gage Company Warranty: One Year Multi-Purpose Welding Gauge. Features Butt Weld Height Weld Leg Weld Throat  Width of Weld Seam Bevel Angle Under Cut  Gap Size Specifications Gauge Measures 2.75" x 2" • 6.985 cm x 5.08 cm Downloads G.A.L. Gage Co. Cat # 30 Multi-Purpose Welding Gauge GAL-30 - Data Sheet G.A.L. Gage Co. Cat # 30 Multi-Purpose Welding Gauge GAL-30 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-30-multi-purpose-welding-gauge-gal-30-p-1807.html Mon, 26 Jun 2023 16:43:44 +0000 USD 1807 G.A.L. Gage Co. 999 GAL-30 https://www.abqindustrial.net/store/images/GalGage-30.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-32-measuring-gauges-gal-32-p-1806.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1806 ]]>G.A.L. Gage Co. Cat # 32 Measuring Gauges Gal-32 Measurement Scale: Inch & Metric Manufacturer: G.A.L. Gage Company Warranty: One Year This gauge can be used to measure the offset between two plates over welds, fit-up bars, landing rings or any other object up to and including 1" that might obstruct quick measuring of two plates where the Bridgecam Gauge fails. It can also be used to measure offset of plates in gored elbows, as seen frequently in duct work, for fit-up including the angle of the parts. Downloads G.A.L. Gage Co. Cat # 32 Measuring Gauges Gal-32 - Data Sheet G.A.L. Gage Co. Cat # 32 Measuring Gauges Gal-32 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-32-measuring-gauges-gal-32-p-1806.html Sun, 07 Jul 2024 15:08:31 +0000 USD 1806 G.A.L. Gage Co. 1000 GAL-32 https://www.abqindustrial.net/store/images/GalGage-32.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/paint-test-equipment-bresle-patches-with-certificate-of-conformance-p-1805.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1805 ]]>Latex-free and contamination-free Patches The Bresle Patch has a test area of 1250m2 and is suitable for use with 2.5ml of water. The only degeneration on the Bresle Patches is the adhesive if exposed to extremes of temperature.It is recommended that the Patches are used within a 12-month period from the date of purchase. Bresle Patches will allow you to extract salts from blast-cleaned steel for measurement using the Horiba Conductivity Meter in the Bresle Patch Test. Salts are almost colourless and are localized at the lowest point of the rust pits.If they are not removed prior to painting, chemical reactions can result in blister formation and accumulations of rust that destroy the adhesion between the substrate and the applied protective coating. Supplied in packs of 35. Compliant to ISO 8502-6. Features Latex-free and contamination-free Patches. The Bresle Patch has a test area of 1250m2 and is suitable for use with 2.5ml of water. The only degeneration on the Bresle Patches is the adhesive if exposed to extremes of temperature.It is recommended that the Patches are used within a 12-month period from the date of purchase. Downloads Paint Test Equipment Bresle Patches with Certificate of Conformance - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/paint-test-equipment-bresle-patches-with-certificate-of-conformance-p-1805.html Mon, 28 Aug 2023 13:40:38 +0000 USD 1805 Paint Test Equipment 734 PS002 https://www.abqindustrial.net/store/images/products/bresle-patch.jpg https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-x-coarse-plus-grade-press-o-film-replica-tape-4-6-to-5-0-mils-116-to-127-microns-rtxcplus-a-p-1804.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1804 ]]>Testex X-Coarse Plus Grade Press-O-Film Replica Tape RTXCPLUS-A Range: 4.6 to 5.0 mils / 116 to 127 microns Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel. 50 tests per roll Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple Testex Micrometer or PosiTector RTR Replica Tape Reader will allow you to take accurate, low-cost blast-surface profile measurements. Testex Press-O-Film makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs. The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles. Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc. Specifications Testex Press-O-Film replica tape is available in a variety of thicknesses to facilitate profile measurement in differing ranges: Testex Press-O-Film Replica Tape Medium Grade Testex Press-O-Film Replica Tape Coarse Minus Grade Testex Press-O-Film Replica Tape Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Plus Grade Range When Used With Gauge (mils) / (microns) not applicable 0.5 to 1.0 / 12 to 25 0.8 to 2.5 / 20 to 64 1.5 to 4.5 / 38 to 115 4.6 to 5.0 / 116 to 127 Related Products Testex Micrometer Dial Thickness Gauge To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces. DeFelsko PosiTector RTR H Replica Tape Reader Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape DeFelsko Positector RTR 3D Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Download 3D .SDF image files for analysis in included software for Windows and Mac Downloads Testex X-Coarse Grade Press-O-Film Replica Tape - Brochure Replica Tape Article - A Source of New Surface Profile Information Testex Press-O-Film Replica Tape - Online Instructions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-x-coarse-plus-grade-press-o-film-replica-tape-4-6-to-5-0-mils-116-to-127-microns-rtxcplus-a-p-1804.html Wed, 22 May 2024 19:37:41 +0000 USD 1804 Testex 7907 Testex-X-Coarse-Plus https://www.abqindustrial.net/store/images/products/Testex-X-Coarse-Plus-Grade-Press-OFilm-Replica-Tape.jpg https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-coarse-grade-press-o-film-replica-tape-0-8-to-2-5-mils-20-to-64-microns-rtc-a-p-1803.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1803 ]]>Testex Coarse Grade Press-O-Film Replica Tape RTC-A Range: 0.8 to 2.5 mils / 20 to 64 microns Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel. 50 tests per roll Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple Testex Micrometer or PosiTector RTR Replica Tape Reader will allow you to take accurate, low-cost blast-surface profile measurements. Testex Press-O-Film makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs. The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles. Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc. Specifications Testex Press-O-Film replica tape is available in a variety of thicknesses to facilitate profile measurement in differing ranges: Testex Press-O-Film Replica Tape Medium Grade Testex Press-O-Film Replica Tape Coarse Minus Grade Testex Press-O-Film Replica Tape Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Plus Grade Range When Used With Gauge (mils) / (microns) not applicable 0.5 to 1.0 / 12 to 25 0.8 to 2.5 / 20 to 64 1.5 to 4.5 / 38 to 115 4.6 to 5.0 / 116 to 127 Related Products Testex Micrometer Dial Thickness Gauge To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces. DeFelsko PosiTector RTR H Replica Tape Reader Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape DeFelsko Positector RTR 3D Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Download 3D .SDF image files for analysis in included software for Windows and Mac Downloads Testex X-Coarse Grade Press-O-Film Replica Tape - Brochure Replica Tape Article - A Source of New Surface Profile Information Testex Press-O-Film Replica Tape - Online Instructions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-coarse-grade-press-o-film-replica-tape-0-8-to-2-5-mils-20-to-64-microns-rtc-a-p-1803.html Wed, 22 May 2024 19:38:12 +0000 USD 1803 Testex 7648 Testex-Coarse-Grade https://www.abqindustrial.net/store/images/products/Testex-Coarse-Grade-Press-O-Film-Replica-Tape.jpg https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-coarse-minus-grade-press-o-film-replica-tape-0-5-to-1-0-mils-12-to-25-microns-rtcmin-p-1802.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1802 ]]>Testex Coarse Minus Grade Press-O-Film Replica Tape Range: 0.5 to 1.0 mils / 12 to 25 microns Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel. 50 tests per roll Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple Testex Micrometer or PosiTector RTR Replica Tape Reader will allow you to take accurate, low-cost blast-surface profile measurements. Testex Press-O-Film makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs. The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles. Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc. Specifications Testex Press-O-Film replica tape is available in a variety of thicknesses to facilitate profile measurement in differing ranges: Testex Press-O-Film Replica Tape Medium Grade Testex Press-O-Film Replica Tape Coarse Minus Grade Testex Press-O-Film Replica Tape Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Plus Grade Range When Used With Gauge (mils) / (microns) not applicable 0.5 to 1.0 / 12 to 25 0.8 to 2.5 / 20 to 64 1.5 to 4.5 / 38 to 115 4.6 to 5.0 / 116 to 127 Related Products Testex Micrometer Dial Thickness Gauge To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces. DeFelsko PosiTector RTR H Replica Tape Reader Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape DeFelsko Positector RTR 3D Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Download 3D .SDF image files for analysis in included software for Windows and Mac Downloads Testex X-Coarse Grade Press-O-Film Replica Tape - Brochure Replica Tape Article - A Source of New Surface Profile Information Testex Press-O-Film Replica Tape - Online Instructions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-coarse-minus-grade-press-o-film-replica-tape-0-5-to-1-0-mils-12-to-25-microns-rtcmin-p-1802.html Wed, 19 Jul 2023 03:28:09 +0000 USD 1802 Testex 8019 Testex-Coarse-Minus https://www.abqindustrial.net/store/images/products/Testex-Coarse-Minus-Grade-Press-O-Film-Replica-Tape.jpg https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-medium-grade-press-o-film-replica-tape-range-5-to-75-microinch-0-1-to-2-microns-rtmed-p-1801.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1801 ]]>Testex Medium Grade Press-O-Film Replica Tape Range: 5 to 75 microinch / 0.1 to 2 microns Testex Press-O-Film Replica Tape can be used with a Testex Micrometer or PosiTector RTR Replica Tape Reader to measure the surface roughness ("profile") of blast-cleaned steel. 50 tests per roll Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple Testex Micrometer or PosiTector RTR Replica Tape Reader will allow you to take accurate, low-cost blast-surface profile measurements. Testex Press-O-Film makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs. The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles. Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc. Specifications Testex Press-O-Film replica tape is available in a variety of thicknesses to facilitate profile measurement in differing ranges: Testex Press-O-Film Replica Tape Medium Grade Testex Press-O-Film Replica Tape Coarse Minus Grade Testex Press-O-Film Replica Tape Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Grade Testex Press-O-Film Replica Tape X-Coarse Plus Grade Range When Used With Gauge (mils) / (microns) not applicable 0.5 to 1.0 / 12 to 25 0.8 to 2.5 / 20 to 64 1.5 to 4.5 / 38 to 115 4.6 to 5.0 / 116 to 127 Related Products Testex Micrometer Dial Thickness Gauge To be used with Testex replica Press-O-Film Tape to measure the surface roughness of blast cleaned surfaces. DeFelsko PosiTector RTR H Replica Tape Reader Surface Profile Gage for Blasted Steel and Textured Coatings Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape DeFelsko Positector RTR 3D Replica Tape Reader to Measure & Record 2D/3D Surface Profile Parameters Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film replica tape Download 3D .SDF image files for analysis in included software for Windows and Mac Downloads Testex X-Coarse Grade Press-O-Film Replica Tape - Brochure Replica Tape Article - A Source of New Surface Profile Information Testex Press-O-Film Replica Tape - Online Instructions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/testex-press-o-film-replica-tape-c-108_19/testex-medium-grade-press-o-film-replica-tape-range-5-to-75-microinch-0-1-to-2-microns-rtmed-p-1801.html Wed, 27 Mar 2024 22:35:51 +0000 USD 1801 Testex 8051 Testex-Medium-Grade https://www.abqindustrial.net/store/images/products/Testex-Medium-Grade-Press-O-Film-Replica-Tape.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgp-c-positector-utg-p-probe-only-ultrasonic-thickness-gage-p-1800.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1800 ]]>DeFelsko PRBUTGP PosiTector UTG P Probe Only Ultrasonic Thickness Gage, 15 MHz Single Element Delay Line Gage Sold Separately Steel Measuring Range: 0.008" to 0.475" - 0.2 to 12.0 mm | Plastic Measuring Range: 0.005" to 0.175" - 0.125 to 4.500 mm The DeFelsko PRBUTGP-C PosiTector UTG P Probe Only Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgp-c-positector-utg-p-probe-only-ultrasonic-thickness-gage-p-1800.html Fri, 21 Oct 2022 14:08:43 +0000 USD 1800 DeFelsko 997 PRBUTGP https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGP-Positector-UTG-P-Probe-Only.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgp3-g-positector-utg-p3-advanced-ultrasonic-thickness-gage-with-precision-probe-p-1799.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1799 ]]>DeFelsko UTGP3-G PosiTector UTG P3 Advanced Ultrasonic Thickness Gage with Precision Probe, 15 MHz Single Element Delay Line Steel Measuring Range: 0.008" to 0.475" - 0.2 to 12.0 mm | Plastic Measuring Range: 0.005" to 0.175" - 0.125 to 4.500 mm The DeFelsko UTGP3-G PosiTector UTG P3 Advanced Ultrasonic Thickness Gage with Precision Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG P3 Advaned Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG P Probe PRBUTGP Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgp3-g-positector-utg-p3-advanced-ultrasonic-thickness-gage-with-precision-probe-p-1799.html Fri, 21 Oct 2022 14:07:42 +0000 USD 1799 DeFelsko 989 UTGP3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-p.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgp1-g-positector-utg-p1-standard-ultrasonic-thickness-gage-with-precision-probe-p-1798.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1798 ]]>DeFelsko UTGP1-G PosiTector UTG P1 Standard Ultrasonic Thickness Gage with Precision Probe, 15 MHz Single Element Delay Line Steel Measuring Range: 0.008" to 0.475" - 0.2 to 12.0 mm | Plastic Measuring Range: 0.005" to 0.175" - 0.125 to 4.500 mm The DeFelsko UTGP1-G PosiTector UTG P1 Standard Ultrasonic Thickness Gage with Precision Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG P1 Standard Ultrasonic Thickness Gage Kit includes everything needed for testing:: PosiTector Standard Gage Body BDYSTD-G PosiTector UTG P Probe PRBUTGP Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgp1-g-positector-utg-p1-standard-ultrasonic-thickness-gage-with-precision-probe-p-1798.html Fri, 21 Oct 2022 14:07:47 +0000 USD 1798 DeFelsko 989 UTGP1 https://www.abqindustrial.net/store/images/defelsko-positector-utg-p.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgclf-c-positector-utg-clf-probe-only-ultrasonic-thickness-gage-p-1797.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1797 ]]>DeFelsko PRBUTGCLF PosiTector UTG CLF Probe Only Ultrasonic Thickness Gage, 2.25 MHz Dual Element Gage Sold Separately Measuring Range: 0.080" to 5.000" - 2.00 to 125.00 mm The DeFelsko PRBUTGCLF-C PosiTector UTG CLF Probe Only Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgclf-c-positector-utg-clf-probe-only-ultrasonic-thickness-gage-p-1797.html Tue, 18 Oct 2022 14:58:43 +0000 USD 1797 DeFelsko 997 PRBUTGCLF https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGCLF-Positector-UTG-CLF-Probe-Only.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgclf3-g-positector-utg-clf3-advanced-ultrasonic-thickness-gage-with-low-frequency-probe-p-1796.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1796 ]]>DeFelsko UTGCLF3-G PosiTector UTG CLF3 Advanced Ultrasonic Thickness Gage with Low Frequency Probe, 2.25 MHz Dual Element Measuring Range: 0.080" to 5.000" - 2.00 to 125.00 mm The DeFelsko UTGCLF3-G PosiTector UTG CLF3 Advanced Ultrasonic Thickness Gage with Low Frequency Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CLF3 Advaned Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG CLF Probe PRBUTGCLF Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgclf3-g-positector-utg-clf3-advanced-ultrasonic-thickness-gage-with-low-frequency-probe-p-1796.html Fri, 21 Oct 2022 14:07:43 +0000 USD 1796 DeFelsko 997 UTGCLF3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-clf.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgclf1-g-positector-utg-clf1-standard-ultrasonic-thickness-gage-with-low-frequency-probe-p-1795.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1795 ]]>DeFelsko UTGCLF1-G PosiTector UTG CLF1 Standard Ultrasonic Thickness Gage with Low Frequency Probe , 2.25 MHzDual Element Measuring Range: 0.080" to 5.000" - 2.00 to 125.00mm The DeFelsko UTGCLF1-G PosiTector UTG CLF1 Standard Ultrasonic Thickness Gage with Low Frequency Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CLF1 Standard Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector UTG CLF Probe PRBUTGCLF Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Large, easy-to-read, graphics LCD Pre-programmed velocities - Simply select from a list of common materials or enter your own with ease Smart Couple™ - Eliminates inadvertent decoupling - ideal for analyzing large areas using multiple passes Enhanced one-handed menu navigation Flashing display — ideal in a noisy environment RESET feature instantly restores factory settings Durable Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Impact resistant lens Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST included Conforms to national and international standards including ASTM E797 Built-in temperature compensation ensures measurement accuracy Versatile High contrast LCD with backlit display Single or two point adjustment Inch/mm switchable Selectable display languages Flip display enables right-side-up viewing Uses alkaline or rechargeable batteries (built-in charger) Powerful Min Scan - measurement rate of up to 20 readings per second with onscreen min and max for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits Sealed USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture - record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Standard Model Features Standard Models, includes ALL features as shown on left plus Storage of 250 readings per probe- stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgclf1-g-positector-utg-clf1-standard-ultrasonic-thickness-gage-with-low-frequency-probe-p-1795.html Fri, 21 Oct 2022 14:07:49 +0000 USD 1795 DeFelsko 995 UTGCLF1 https://www.abqindustrial.net/store/images/defelsko-positector-utg-clf.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgca-c-positector-utg-ca-probe-only-ultrasonic-thickness-gage-p-1794.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1794 ]]>DeFelsko PRBUTGCA PosiTector UTG CA Probe Only Ultrasonic Thickness Gage, 5 MHz Dual Element Gage Sold Separately Measuring Range: 0.040" to 5.000" - 1.00 to 125.00 mm The DeFelsko PRBUTGCA-C PosiTector UTG CA Probe Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgca-c-positector-utg-ca-probe-only-ultrasonic-thickness-gage-p-1794.html Tue, 18 Oct 2022 14:58:41 +0000 USD 1794 DeFelsko 996 PRBUTGCA https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGCA-Positecto.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgca3-g-positector-utg-ca3-advanced-ultrasonic-thickness-gage-integral-corrosion-probe-p-1793.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1793 ]]>DeFelsko UTGCA3-GPosiTectorUTG CA3 Advanced Ultrasonic Thickness Gage with Integral Probe, 5 MHz Dual Element Measuring Range: 0.040" to 5.000" - 1.00 to 125.00 mm The DeFelsko UTGCA3-G PosiTector UTG CA3 Advanced Ultrasonic Thickness Gage with Integral Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CA3 Advaned Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG CA Probe PRBUTGCA Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgca3-g-positector-utg-ca3-advanced-ultrasonic-thickness-gage-integral-corrosion-probe-p-1793.html Fri, 21 Oct 2022 14:07:45 +0000 USD 1793 DeFelsko 1000 UTGCA3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-ca.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgca1-g-positector-utg-ca1-standard-ultrasonic-thickness-gage-integral-corrosion-probe-p-1792.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1792 ]]>DeFelsko UTGCA1-G PosiTector UTG CA1 Standard Ultrasonic Thickness Gage with Integral Corrosion Probe, 5 MHz Dual Element Measuring Range: 0.040" to 5.000" - 1.00 to 125.00 mm The DeFelsko UTGCA1-G PosiTector UTG CA1 Standard Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CA1 Standard Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector UTG CA Probe PRBUTGCA Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgca1-g-positector-utg-ca1-standard-ultrasonic-thickness-gage-integral-corrosion-probe-p-1792.html Fri, 21 Oct 2022 14:07:51 +0000 USD 1792 DeFelsko 996 UTGCA1 https://www.abqindustrial.net/store/images/defelsko-positector-utg-ca.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgos-b-positector-spg-surface-profile-gage-cabled-probe-only-for-blasted-steel-p-1791.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1791 ]]>DeFelsko PRBSPGOS-B PosiTector SPG Surface Profile Gage Cabled Probe Only for Blasted Steel Range: 0 to 500 um (0-20 mils) The PosiTector SPG OS is a surface profile gage ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an OD above 3mm (0.125”) such as pipes and tanks Gage Body Sold Separately Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko PRBSPGOS-B PosiTector SPG Surface Profile Gage Cabled Probe is ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an OD above 3mm (0.125”) such as pipes and tanks. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Quick Guide DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Full Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages - Order Guide DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgos-b-positector-spg-surface-profile-gage-cabled-probe-only-for-blasted-steel-p-1791.html Tue, 30 Jul 2024 17:00:44 +0000 USD 1791 DeFelsko 991 PRBSPGOS https://www.abqindustrial.net/store/images/DeFelsko-PRBSPGOS-B-PosiTector-SPG-Surface.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgos3-g-positector-spg-os3-advanced-surface-profile-gage-for-blasted-steel-p-1790.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1790 ]]>DeFelsko SPGOS3-G PosiTector SPG OS3 Advanced Surface Profile Gage for Blasted Steel Range: 0 - 500 um 0 - 20 mils Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGOS3-G PosiTector SPG OS3 Advanced Surface Profile Gage for Blasted Steel is a surface profile gage ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an OD above 3mm (0.125”) such as pipes and tanks. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGOS 3 Advanced Surface Profile Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SPGOS E Probe PRBSPGOSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages - OS For Convex Surfaces DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgos3-g-positector-spg-os3-advanced-surface-profile-gage-for-blasted-steel-p-1790.html Tue, 30 Jul 2024 16:57:33 +0000 USD 1790 DeFelsko 999 SPGOS3 https://www.abqindustrial.net/store/images/defelsko-positector-spg-os.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgos1-g-positector-spg-os1-standard-surface-profile-gage-for-blasted-steel-p-1789.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1789 ]]>DeFelsko SPGOS1-G PosiTector SPG OS1 Standard Surface Profile Gage for Blasted Steel Range: 0 to 500 um (0-20 mils) Digital depth micrometer measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGOS1-G PosiTector SPG OS1 Standard Surface Profile Gage for Blasted Steel is a surface profile gage ideal for measuring the peak-to-valley surface profile height of flat or convex surfaces with an OD above 3mm (0.125”) such as pipes and tanks. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGOS 1 Standard Surface Profile Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SPGOS E Probe PRBSPGOSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages - OS For Convex Surfaces DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgos1-g-positector-spg-os1-standard-surface-profile-gage-for-blasted-steel-p-1789.html Tue, 30 Jul 2024 16:54:07 +0000 USD 1789 DeFelsko 994 SPGOS1 https://www.abqindustrial.net/store/images/defelsko-positector-spg-os.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/feedback-datalogger-kits-c-107_127_134/tramex-fbzk5-1-feedback-datalogger-ez-kit-p-1788.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1788 ]]>Ambient Relative Humidity, Temperature, Dew point, Grains per pound In Situ Relative Humidity, Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe) The Tramex FBZK5.1 Feedback Datalogger EZ Kit has been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology and performing ASTM F2170. The Tramex DL-RHTX Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualize Live Readings, Thermal Conditions and Psychrometric Charts, as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Feedback Data Logger App and a compatible iOS or Android mobile device. Kit Contents Tramex DL-RHTX Feedback DataLogger Tramex HIPP Hygro-i2 Relative Humidity Probe (5X) Tramex RHHL Hygro-i Hole Liners and Caps Tramex RHIE2 Electronic Interface Cable Tramex Free App available for Android and iOS (phone not included) Tramex ALLBAGP Carring Case Features Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries possible. Instant set up and start modes. Used to perform ASTM F2170. Ambient and In-situ RH and temperature logging Intuitive and instructive APP interface. Adjustable interactive chart, spreadsheet, report and easy-export functions. Connectivity up to 165ft (50 meters) for highly accessible data downloads. Specifications With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF. Size 3.94” x 3.54” x 1.38” (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included Wall Mounting and Tripod Stand Supported measurements Ambient Relative Humidity Temperature, Dew point, Grains per pound In Situ Relative Humidity Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe) Psychrometric chart showing Relative Humidity Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point Relative humidity sensor specifications Range 0 to 100%RH Accuracy ±1.5%RH Range 0% to 80% RH ±2.0%RH Range 80% to 99% RH (@ 77ºF (25ºC)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/feedback-datalogger-kits-c-107_127_134/tramex-fbzk5-1-feedback-datalogger-ez-kit-p-1788.html Mon, 21 Nov 2022 10:44:49 +0000 USD 1788 Tramex 999 FBZK5.1 https://www.abqindustrial.net/store/images/Tramex-FBZK51-Feedback-Datalogger-EZ-Kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/feedback-datalogger-kits-c-107_127_134/tramex-fbsk5-1-feedback-datalogger-starter-kit-p-1787.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1787 ]]>Bluetooth BLE enabled for use with mobile devices With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF. The Tramex FBSK5.1 Feedback Datalogger Starter Kit has been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology and performing ASTM F2170. The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualize Live Readings, Thermal Conditions and Psychrometric Charts, as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Feedback Data Logger App and a compatible iOS or Android mobile device. Kit Contents Tramex DL-RHTX Feedback DataLogger Tramex HIPP Hygro-i2 Relative Humidity Probe Tramex RHIE2 Electronic Interface Cable Free App available for Android and iOS Tramex ALLPOUCH Carrying Case Features Bluetooth BLE enabled for use with mobile devices. Up to 100,000 data point entries possible. Instant set up and start modes. Used to perform ASTM F2170. Ambient and In-situ RH and temperature logging Intuitive and instructive APP interface. Adjustable interactive chart, spreadsheet, report and easy-export functions. Connectivity up to 165ft (50 meters) for highly accessible data downloads Specifications With built-in Ambient RH + Temperature sensor; Plug-in RH + Temperature Sensor (optional); Contact Temperature Probe (optional) providing the best available accuracy tolerances of 1.5%RH & 0.1ºF. Size 3.94” x 3.54” x 1.38” (100mm x 90mm x35mm) Weight 3.53oz (100g) Construction ABS enclosure Power 1 x AA type battery 1.5 Volt Memory 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature) Logging Rate Logger interval adjustable between 5 minutes and 1 hour Transmission Range Up to 165ft (50m) line-of-sight Bluetooth BLE Bluetooth Low Energy 4.2 compliant, Bluetooth 5 advertising Included Wall Mounting and Tripod Stand Supported measurements Ambient Relative Humidity Temperature, Dew point, Grains per pound In Situ Relative Humidity Temperature, Dew point, Grains per pound (with optional plug-in RH Probe) Contact Temperature Estimated contact RH, Ambient Dew Point, Contact Delta Temperature (with optional contact Temperature Probe) Psychrometric chart showing Relative Humidity Specific Volume, Wet Bulb Temperature, Dry Bulb Temperature, Enthalpy, Humidity Ratio, Dew Point Relative humidity sensor specifications Range 0 to 100%RH Accuracy ±1.5%RH Range 0% to 80% RH ±2.0%RH Range 80% to 99% RH (@ 77ºF (25ºC)) Resolution 0.1% over the complete range Drift Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/feedback-datalogger-kits-c-107_127_134/tramex-fbsk5-1-feedback-datalogger-starter-kit-p-1787.html Mon, 21 Nov 2022 10:44:46 +0000 USD 1787 Tramex 997 FBSK5.1 https://www.abqindustrial.net/store/images/Tramex-FBSK51-Feedback-Datalogger-Starter-Kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsik5-1-building-survey-inspection-kit-p-1786.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1786 ]]>Tramex BSIK5.1 Building Survey Inspection Kit Warranty: All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary. The Tramex BSIK5.1 Building Survey Inspection Kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing. The Tramex MRH III Moisture and Humidity Meter and reusable relative humidity probe allow for testing relative humidity, temperature and dew point in the environment. When used in conjunction with the infrared surface thermometer, detrimental condensation conditions conducive to microbial growth can also be identified. The heavy-duty pin-probes measure moisture content in wood, and the insulated 7” pins allow for deep wall cavity probing. Concrete slab relative humidity testing to ASTM F2170 can also be performed with reusable relative humidity probes and hole liners (optional). Kit Contents Tramex MRH III Moisture and Humidity Meter Tramex RHP-SW Relative Humidity Probes Tramex Heavy-duty Pin-type Wood Probe Tramex HA21SP52 Hammer-Action Pin-Type Electrode Tramex SP52 Spare 1.5" Pins for Hammer Probe (pack of 10) Tramex HH14SP200 Spare 7" Pins for Pin Probe(pack of 2) Tramex IRT2 Infrared Surface Thermometer Tramex SAL75 Calibration Salt Check Tramex RHHLsR - Tramex HYGRO-i2® 16mm Hole Liners Tramex MAXMULTI Carring Case Features Deep signal, non-destructive penetration up to 1¼" in wood and drywall in non-destructive mode. Detects moisture through paint, wall coverings, drywall, ceramic tiles, floor coverings, wood, roof coverings and most building materials. Hold function “freezes” meter reading when inspecting areas where the meter face is not visible. Audio signal sounds when meter indicates high readings. Large clear backlit digital display giving meaningful readings. Accurate non-invasive moisture content readings from 5 to 55% MC in wood. Attachable pin-type wood probe for accessing hard to reach areas and for probing into wall cavities and wood. Attachable Relative Humidity probe for testing of relative humidity, temperature, dew point and grains per pound readings all shown on one clear display, (as well as in situ of concrete per ASTM F2170 with optional Hygro-I probes, hole liners and caps). Warranty: All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary Specifications Size 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm) Weight 8.2lbs (3.72kg) Power 2 x 9 volt PP3 Battery Included Measuring Range  MRH III Depth of penetration (NDT*) up to 1¼" (30mm) (in wood, drywall) Wood Non-invasive Mode 5 to 55% (at SG of 0.3) Wood Invasive Mode using Pin Probe 7 to 40% Reference scale for building materials 0 to 100 Relative Humidity (with Hygro-i2 ® probe) 0 to 99% Humidity accuracy 0% to 99%RH +/- 2% @ 25°C / 77°F Related Products Tramex MRH III Moisture and Humidity Meter Moisture testing of wood, drywall, masonry, roofing and other construction materials Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface Tramex SAL75 Calibration Salt Check Calibration Salt Check for Tramex Hygro-i2 Relative Humidity Probe. The calibration salt check allows for regular calibration checks. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i2®RH probe is optimum Order Code: SAL75, for Tramex RHP-LW Long RH Probe, Tramex RHP-SW Relative Humidity Probes Order Code: SAL75S, for Tramex RHP-NW Narrow Wand Relative Humidity Probe, Tramex RHP-SW Relative Humidity Probes Order Code: SAL75N for Tramex RHP-NW Narrow Wand Relative Humidity Probe, Tramex RHP-SNW Short Narrow Wand Relative Humidity Probe Order Code: SAL75-6 for Tramex Hygro-i2 Relative Humidity Probe for calibration checking of 6 probes at once. Tramex IRT2 Infrared Surface Thermometer his hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance. Tramex Heavy-duty Pin-type Wood Probe with Cable and Pins For use with CMEX5, CMEX2, MRH3 & PTM. Order Code: HH14TP30 (For use with CMEX2, MRH3 and PTM) Order Code: HH14TP30B (For use with CMEX5) Tramex HA21SP52 Hammer-Action Pin-Type Electrode Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX5, MRH3. Order Code: HA21SP52 (For use with MRH3) Order Code: HA21SP52B (For use with CMEX5) Tramex SP200 Spare 7" Pins for Pin Probe HH14SP200 Heavy-Duty Electrode with Cable and 7" (200mm) Long Pins for use with CMEX5, MRH Order Code: HH14SP200 For use with MRH3 Order Code: HH14SP200B For use with CMEX5 Tramex CALCRH Calibration Check for CME5, CMEX5 Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX5, MRH3 Order Code: HH14SP90 For use with MRH3 Order Code: HH14SP90 For use with CMEX5 Tramex ASTM F2170 Accessory Pack Accessory Pack for RH testing The AP-F2170-B for use with the: CMEX5 and DL-RHTX The AP-F2170 for use with the: CMEX2 and MRH3 Downloads Tramex BSIK5.1 Building Survey Inspection Kit - Data Sheet Tramex MRH III Moisture & Humidity Meter - Quick Guide Tramex MRH III Moisture & Humidity Meter - Instruction Manual Tramex MRH III Moisture & Humidity Meter - Data Sheet Tramex IRT2 Infrared Surface Thermometer - Data Sheet Accessories for Tramex Moisture Meters - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-inspection-kits-c-107_127/building-survey-inspection-kits-c-107_127_130/tramex-bsik5-1-building-survey-inspection-kit-p-1786.html Thu, 25 Jan 2024 03:13:54 +0000 USD 1786 Tramex 1000 BSIK5.1 https://www.abqindustrial.net/store/images/Tramex-BSIK51-Building-Survey-Inspection-Kit.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-gedore-rtu-dynamic-torque-limiter-p-1785.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1785 ]]>The Mountz Gedore RTU Dynamic Torque Limiter allows conventional hand and power tools to be easily converted into torque limiting tools Ranges up to 124 lb-in / 10 Nm The Mountz Gedore RTU Dynamic Torque Limiter allows conventional hand and power tools to be easily converted into torque limiting tools. Simply install the Mountz Gedore RTU to the end of a traditional power tool or hand tool to convert. Non-impact powered assembly applications can be performed quickly and accurately, including the tightening of bottles, caps and lids. Features Repeatability +/- 6% of reading ISO 6789 Classification 2F Ranges Part Number Model Range Max RPM Drive 018100 RTU 170 (SILVER) 20-170 cN.m / 1.8-15 lbf.in 500 3/8" M/F Square 018120 RTU 170 HEX (SILVER) 20-170 cN.m / 1.8-15 lbf.in 500 1/4" M/F Hex 018200 RTU 450 (SILVER) 1-4.5 N.m / 9-40 lbf.in 500 3/8" M/F Square 018220 RTU 450 HEX (SILVER) 1-4.5 N.m / 9-40 lbf.in 500 1/4" M/F Hex 018300 RTU 1000 (SILVER) 4-10 N.m / 36-88 lbf.in 250 3/8" M/F Square 018320 RTU 1000 HEX (SILVER) 4-10 N.m / 36-88 lbf.in 250 1/4" M/F Hex 019100 RTU 1 (BLUE) 0.1-1 N.m / 0.9-8.8 lbf.in 500 * 019200 RTU 4 (BLUE) 0.6-4.5 N.m / 5.5-39.8 lbf.in 500 * 019400 RTU 14 (BLUE) 2-14 N.m / 18-123.8 lbf.in 125 * *Input Drive 3/8" Female Square with 1/4" Adapter, Output 1/4" Male Square with 1/4" Female Hex Adapter Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/torque-wrenches-c-101_27/mountz-gedore-rtu-dynamic-torque-limiter-p-1785.html Wed, 03 Apr 2024 19:23:50 +0000 USD 1785 Gedore 996 RTU https://www.abqindustrial.net/store/images/Mountz-RTU-Dynamic-Torque-Limiter.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303h-advanced-motorized-horizontal-test-stand-p-1784.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1784 ]]>Mark-10 ESM303H Advanced Motorized Horizontal Test Stand Force Gauge sold Separately Selectable speed setting Right and left travel limit switches The Mark-10 ESM303H Advanced Motorized Horizontal Test Stand is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the load cell to move the crosshead at a variable rate of speed. With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save up to 50 profiles to accommodate a range of test methods. When the Mark-10 ESM303H’s clearance is insufficient for the application, its modular mechanical design allows for frame extensions. Modularity extends to the controller functions as well. Individual functions, such as travel measurement, cycling, loadholding, etc., may be purchased either upfront or enabled in the field through an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and budget. Collect force and travel data, plot and analyze the results, and control test stand motion via PC-based MESUR™gauge Plus software. Or, fully control the stand by a PC through a custom-written program in any language supporting ASCII communications. Kit Contents Mark-10 ESM303H Advanced Motorized Horizontal Test Stand G1024 extension rod, 2” G1028 small hook G1038 medium hook G1039 coupling, #10-32F/F G1009 compression plate, 2” dia. G1030 thread adapter, 5/16-18M to #10-32F (2- two) G1067 thread adapter, 1/2-20 to #10-32F G1069 thread adapter, 5/16-18F to 1/4-28M #10-32 studs with hex nuts (3 - three) Thumb screw for indicator (4 - four) Thumb screw for limit switches (2- two) Allen wrench set Control panel Control panel mounting bracket and hardware Power cord Features Selectable speed setting Right and left travel limit switches Adjustable, removable control panel may be mounted to the left or right end of the frame Password protection of test parameters Stepper motor-driven, producing smooth and quiet operation with no speed variation under load USB output of force or force vs. travel Compact footprint, suitable for crowded work benches Ergonomic design, with smart, clean cable management Integrated electronics assembly, easily removed and transported for service Adjustable mounting plate with T-slot base Specifications Load capacity 300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min)  200 lbF (1 kN) @ >24 in/min (610 mm/min) Maximum travel distance 18.0 in (457 mm) Speed range Standard: 0.5 - 13 in/min (13 - 330 mm/min)  Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min) Speed setting accuracy ±0.2% of setting Speed variation with load ±0% (stepper motor driven) Travel accuracy* ±0.002 in. per 10 in. (±0.05 mm per 250 mm) Travel resolution 0.001 in / 0.02 mm Limit switch repeatability 0.001 in (0.03 mm) Power Universal input 80-240 VAC, 50/60 Hz Weight 62.5 lb (28.4 kg) Warranty 3 years (see individual statement for further details) * Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance Hardware and Software Options Control panel tabletop mounting kit For applications requiring remote use of the control panel. Consists of a base with mounting hardware for the angle bracket (bracket is included with the test stand). Base contains thru holes for bench mounting. Data collection & motion control software Consider MESUR™gauge Plus for force vs. travel or force vs. time data acquisition, plotting, analysis, reporting, as well as motion control. The software coordinates motor start / stop and data acquisition with one click. Note: MESUR™gauge Plus does not require any optional test stand functions for motor control. Consider the Travel Indication option for force vs. travel vs. time output. See below section for details. Indicators Select from Models M7i or M5i. Both indicators mount directly to the crosshead adapter. Note: Force gauges cannot be mounted to the ESM303H test stand. Series R01 S-beam load cells Select from a range of capacities, from 50 lbF (250 N) and higher. Add suffix "-1" for shortened cable, for optimal mounting. Ex: MR01-100-1. Series R03 inline load cells Select from a range of capacities, from 0.25 lbF (1 N) and higher. Add suffix "-1" for short ened cable, for optimal mounting. Ex: MR03-50-1. Interface cable, indicator to test stand (09-1252) Connects an M7i or M5i indicator to the crosshead. This single cable is used to transmit data and power. The indicator's AC adapter is not required USB cable, test stand to PC (09-1158) For force and travel data output and PC control. Load cell hardware kit (AC1064) Set of mounting hardware to mount other manufacturers' load cells with #10-32, 1/4-28, or 1/2-20 mounting threads. Note: Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for an ESM303H. Frame extensions (ESM303-001-1 / -2 / -3) Increase the clearance for long samples. Multiple extensions may be stacked for very long samples. Three lengths are available: 6, 12 and 24 in [150, 300, and 600 mm] Eye end adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges Optional Functions Any of the below functions may be purchased at time of order or may be enabled in the field at a later date via a code activation process. The only exception is the AF009 travel measurement option, which additionally requires field hardware installation. A complete options package is also available, including all of the below functions at a discounted price. The test stand is shipped in Demo Mode, during which time all available functions are temporarily enabled for 160 hours of operation Function Part No. Description FollowMe™ AF008 Crosshead movement responds to manually pushing or pulling on the load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning. Travel indication AF009 Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated. Computer control AF010 The ESM303H may be fully controlled by a PC through a program written in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR™gauge Plus software. Prog. travel limits AF011 The stand stops at or cycles between programmable right and left travel distances. Overload protection AF012 Protects a load cell against overload. Program the desired percentage of full scale of the load cell. Adjustable analog voltage setting allows the stand to interface with virtually any instrument with analog output. Auto Return AF013 The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit. Cycling / dwell time AF014 Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for right and left limits (set independently) can be set up for up to 10,000 seconds. Independent right and left speeds AF016 Configurable speeds for right and left directions. Low Speed Extension AF017 Extends the standard speed range down to 0.02 in/min (0.5 mm/min). High Speed Extension AF018 Extends the standard speed range up to 45 in/min (1,100 mm/min). Break Detection AF019 Crosshead stops at a sudden drop in force. Programmable percentage of peak force. Load Holding AF020 Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time. Preload / Sample Touch AF021 Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping. Profiles AF022 Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored. Complete Options Package AFCOMP-H Includes all functions listed above, plus 09-1252 interface cable and 09-1158 USB cable.  Requires a Model M7i or M5i indicator Related Products Series-7 Professional Digital Force Gauge High-speed 14,000 Hz sampling rate Individual data point memory for up to 5,000 data points, downloadable to a PC Series-5 Advanced Digital Force Gauge - Model M5 High-speed 7,000 Hz peak sampling rate 1,000-point data memory with statistics and outputs ESM750 High Capacity Motorized Test Stand Compatible with indicators and load cells, as well as force gauges ESM1500 High Capacity Motorized Test Stand Compatible with indicators and load cells, as well as force gauges ESM303 High Performance Motorized Test Stand, 300lb Capacity Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min) USB output of force vs. time or force vs. travel (with optional travel measurement) MESURgauge MESURgauge / MESURgauge Plus Load & Travel Analysis Software MESURgauge Plus starts and stops models ESM303, ESM303H, and ESM1500 motorized test stands, coordinating motion control and data collection with just one click Downloads ESM303H Advanced Motorized Test Stand - Data Sheet ESM303H Advanced Motorized Test Stand - Instruction Manual ESM303H Advanced Motorized Test Stand- Code Example ESM303H Advanced Motorized Test Stand - Serial Write Read ESM303H Advanced Motorized Test Stand - Solid Models Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303h-advanced-motorized-horizontal-test-stand-p-1784.html Tue, 30 Jan 2024 03:42:47 +0000 USD 1784 Mark-10 999 ESM303H https://www.abqindustrial.net/store/images/mark-10-esm303h-advanced-motorized-horizontal-test-stand-300-lb-capacity.jpg https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/checkline-mtg-rings-stackable-ring-weight-set-for-mtg-thickness-gauge-p-1783.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1783 ]]>Stackable Ring Weight Set for the MTG thickness gauge MTG Test Sold Seperately The MTG-RINGS kit is designed to add flexibility in the amount of pressure applied by our MTG digital thickness gauge. The kit includes 10 ring weights with a total weight of 520g. 4 threaded column extensions are included to provide enough height to stack all weights if desired. Photo Gallery Related Products MTG Digital Material Thickness Gauge Optional Air Dampening feature allows for a repeatable, controlled rate of descent on to sample Complete Kit MTG-RINGS is supplied with: 1x 200g 2x 100g 1x 50g 4x column extension 2x 20g 2x 10g 2x 5g It is supplied secured in a custom cut foam tray Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/dial-thickness-gauges-c-57/checkline-mtg-rings-stackable-ring-weight-set-for-mtg-thickness-gauge-p-1783.html Wed, 21 Jun 2023 12:52:43 +0000 USD 1783 Checkline 995 MTG-RINGS https://www.abqindustrial.net/store/images/MTG-RINGS-Stackable-Ring-Weight-Set-for-MTG.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-ttc-digital-torque-tool-tester-p-1782.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1782 ]]>Shimpo TTC Digital Torque Tool Tester Strong, light-weight, compact aluminum enclosure allows portability and usage in any shop environment Flexible six modes of operation: Track, Peak, First Peak, Auto Peak, Auto First Peak, Double Peak The Shimpo TTC Digital Torque Tool Tester Series provides exceptional accuracy for measuring torque on various products including torque wrenches, manual screwdrivers, electric screwdrivers, pneumatic screwdrivers and other torque controlled power tools. The Shimpo TTC Digital Torque Tool Tester provide long operation life and power flexibility with the ability to work from the internal rechargeable battery or included AC adapter. The TTC's have six modes of operation: Track for live readings, Peak which records the highest level over a test, First Peak which records a reading after a programmed decrease, Auto Peak which resets after a period of time, Auto First Peak which resets the first peak after a period of time, Double Peak which provides two separate peak readings from programmed decreases. Preset operation with programmable tolerance thresholds for quick pass fail tool test is available in all modes. The analog bar graph on the backlit, reversible LCD aids users by providing the resultant torque’s current position compared to the full scale range along with the direction of the force. Pass/fail icons produce live test feedback allowing instant determination of the results. Every tester comes standard with USB and RS-232 outputs. The TTC's software enables the uploading of data and the additional statistical analysis with its auto-calculation of the selected values. These excellent features make the TTC Torque Tool Testers a valuable and versatile addition to the production and quality control departments. Kit Contents Shimpo TTC Digital Torque Tool Tester USB cable Charger adapter Calibration Certificate Printer cable Square driver adapter connector Features  Strong, light-weight, compact aluminum enclosure allows portability and usage in any shop environment Flexible six modes of operation: Track, Peak, First Peak, Auto Peak, Auto First Peak, Double Peak Backlit graphical, reversible display with analog bar graph plus CW/CCW directional indication provides fast interpretation of tool response. Selectable chart display mode aids viewing performance over the entire test Preset operation with Pass-Fail LED icons enable quick determination of tool performance acceptance Units come standard with USB or RS232 communication output for data upload 1000 memory record storage plus software provides easy data transfer 0.3% accuracy provides a standard for checking tools on ranges up to 590 ft-lb (800 N-m) Operation via the rechargeable battery or the AC Available rundown adapter for power tool testing on certain models Calibration certificate with data guarantees performance upon purchase Specifications Measuring Range 0.5% - 100% capacity Accuracy ± 0.3 % (5 to 100% capacity) Units of Measure N-cm, N-m, in-lb, ft-lb, kg-cm (depending on range) Measure Modes Track, Peak, First Peak, Auto Peak, Auto First Peak & Double Peak Tool Socket Size TTC-2/5/10: 1/4" & 1/2" (6.3 & 12.5 mm) TTC-20/50/100/200: 3/8" & 1/2" (10 & 12.5 mm) TTC-500/800: 3/4" (19 mm) Overload Protection 120% of Full Scale Sampling Rate 2000 Hz Peak Capture Rate 0.05 s Display 160* 128 Dot matrix backlit LCD Display Update Rate 10 times/sec Memory 1000 data Set Point Programmable High and Low Limits Battery Indication Battery icon flashes when low Charger/Adapter Universal USB charger, input 100 – 240 V ac 50/60 Hz Operating Temperature 14 to 104°F (-10 to 40°C) Humidity Limit 20 – 80% RH Power 3.6 V dc 1600 mAH Ni-MH Battery Life Approx. 16 Hours continuous on full charge Output USB, serial port RS-232, High and low limit NPN Dimensions Display TTC-I: 7.75 x 7 x 3.3" (197 x 180 x 83 mm) Display TTC-E: 7.75 x 7 x 3" (197 x 180 x 75 mm) External Sensor (50, 100 N-m): 4.3 x 3.3"(110 x 83 mm) External Sensor (200, 500 & 800 N-m): 4 x 3.8" (100 x 98 mm) Product Weight TTC-I: 3.3 lb (1.5 kg) TTC-E Display: 2.6 lb (1.2 kg) TTC-E-200/500/800 External Sensor: 4.4 lb (2 kg) Package Weight TTC-I: 6.5 lb (3 kg) TTC-E-200/500/800: 10.2 lb (4.6 kg) Warranty 1-Year Certification CE Ranges Model Ranges   Model Ranges TTC-I-2 2 (0.0002) N-m 200 (0.02) N-cm 20 (0.002)kgf-cm TTC-I-100 100 (0.02) N-m 10000 (1) N-cm 1000 (0.1) kgf-cm TTC-I-5 5 (0.001) N-m 500 (0.1) N-cm 50 (0.01) kgf-cm TTC-E-200 200 (0.02) N-m - N-cm 2000 (0.2) kgf-cm TTC-I-10 10 (0.01) N-m 1000 (1) N-cm 100 (0.1) kgf-cm TTC-E-500 500 (0.05) N-m - N-cm 5000 (0.5) kgf-cm TTC-I-20 20 (0.002) N-m 2000 (0.2) N-cm 200 (0.02) kgf-cm TTC-E-800 800 (0.1) N-m - N-cm 8000 (1) kgf-cm TTC-I-50 50 (0.01) N-m 5000 (1) N-cm 500 (0.1) kgf-cm     Downloads Shimpo TTC Digital Torque Tool Tester - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/digital-force-gages-c-101_15/shimpo-ttc-digital-torque-tool-tester-p-1782.html Fri, 06 Jan 2023 19:55:00 +0000 USD 1782 Shimpo 1000 TTC https://www.abqindustrial.net/store/images/Shimpo-TTC-Digital-Torque-Tool-Tester.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/defelsko-positector-irt-infrared-thermometer-p-1781.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1781 ]]>DeFelsko Positector IRT InfraRed Thermometer Button-activated laser pointer for accurate targeting Surface temperature is constantly updated and displayed simultaneously Solvent, acid, oil, water and dust resistant - weatherproof Infrared Thermometer Non-contact surface temperature measurement Button-activated laser pointer for accurate targeting Selectable emissivity values—choose from 7 preset material options, set a custom emissivity value, or adjust to a known temperature Statistics Scan mode—continually displays/updates average, standard deviation, min/max surface temperature and number of readings while measuring one reading per second Certificate of Calibration showing traceability to NIST included (Long Form) 5.7:1 distance to spot ratio—ideal for measuring large areas Smart Trend indicators identify rising, falling or stable readings Kit Contents PosiTector IRT Infrared Thermometer PosiTector IRT Probe PRBIRT Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Convenient carrying case and instructions Two (2) year warranty Features Simple Surface temperature is constantly updated and displayed simultaneously Button-activated laser pointer for simple, accurate targeting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Non-contact sensor won't get caught or worn Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST included (Long Form) Fast response precision sensor provides accurate, repeatable readings 5.7:1 distance to spot ratio—ideal for measuring large areas Smart Trend™ indicators identify rising, falling, or stable readings Versatile PosiTector body accepts all PosiTector IRT, DPM, 6000, 200, RTR, SPG, SST, SHD, and UTG probes easily converting from a infrared thermometer, to a dew point meter, coating thickness gage, surface profile gage, soluble salt tester, Shore hardness durometer or ultrasonic wall thickness gage Selectable emissivity values - choose from 7 preset material options, set a custom emissivity value, or adjust to a known temperature NEW Auto rotating display with Flip Lock Powerful Scanning Statistics Scan Mode—continually displays/updates average, standard deviation, min/max surface temperature, and number of readings while measuring one reading per second NEW Screen Capture—save 100 screen images for record keeping and review Pause function allows readings to be manually recorded HiLo alarm audibly and visibly alerts when readings exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing, analyzing & reporting data Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe—stored readings can be viewed or downloaded Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Store thickness, profile, environmental salt contamination, hardness, and wall thickness measurements in individual batches Models IRT1 IRT3 PRBIRT Distance to Spot Ratio (D:S) Distance to Spot Ratio (D:S) Distance to Spot Ratio (D:S) 5.7:1 5.7:1 5.7:1 Temperature Range Temperature Range Temperature Range -70° to 380° C -94° to 716° F -70° to 380° C -94° to 716° F -70° to 380° C -94° to 716° F Specifications Specifications Range Accuracy Resolution Temperature Range -70° to 380° C-94° to 716° F ±1° C + 1%*±1.8° F + 1%* 0.1° C0.1° F * At 23° C (73.4° F) ambient Laser Pointer Class 2 < 1mW Distance to Spot Ratio (D:S) 5.7:1 Emissivity Adjustable Response Time Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/thermometers-hand-held-c-103_4/defelsko-positector-irt-infrared-thermometer-p-1781.html Tue, 09 Apr 2024 13:39:40 +0000 USD 1781 DeFelsko 984 IRT https://www.abqindustrial.net/store/images/defelsko-positector-irt-infrared-thermometer.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstabrkit-positector-sst-abrasives-test-kit-p-1780.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1780 ]]>DeFelsko SSTABRKIT PosiTector SST Abrasives Test Kit Measures the concentration of water-soluble contaminates in blast cleaning abrasives Quickly test abrasives for soluble salt contamination in the field or in the laboratory Measures the concentration of water-soluble contaminates in blast cleaning abrasives The Abrasives Test Kit for the DeFelsko PosiTector SST was designed to determine the concentration of soluble salt contaminates in blast cleaning abrasives, in accordance with ASTM D4940 and ISO 11127-6. Kit Contents 600 ml glass beaker 100 ml glass beaker 600 ml plastic beaker Plastic funnel 60 ml Certified Conductivity Standard 1 liter deionized water (type II) 100 circle filters (125 mm) Stainless steel mixing rod Instruction card Certificate of Analysis Features  Simple Quickly test abrasives for soluble salt contamination in the field or in the laboratory Includes everything required to measure abrasive contamination using a PosiTector SST or other conductivity meter Portable - includes a durable, hard shell case Accurate Specifically designed for ASTM D4940 and ISO 11127-6 Includes certified conductivity standard (calibration solution) to verify meter accuracy. Certificate of Analysis included. Specifications Certified Conductivity Standard (60 ml) To verify meter accuracy Deionized Water (250 ml or 1L) Purified, ion-free water Circle Filters (100 pack): 125 mm for use with Abrasives Test Kit Case Size 43 x 36 x 17 mm (17" x 14" x 6.75") Weight 3.7 kg (8.25 lbs) Downloads DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstabrkit-positector-sst-abrasives-test-kit-p-1780.html Thu, 15 Jun 2023 22:27:09 +0000 USD 1780 DeFelsko 998 SSTABRKIT https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-SST-Abrasives-Test-Kit.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdkit-positest-hhd-kit-high-voltage-holiday-detector-p-1779.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1779 ]]>Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected The DeFelsko PosiTest HHD High voltage Holiday Detector uses pulse DC technology to detect holidays, pinholes, and other discontinuities on metal and concrete substrates Lightweight, ergonomic design provides comfortable all-day use, reducing operator fatigue Regulated pulse DC voltage output that won't change under load -±5% voltage accuracy Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Extensive electrode options - choose from a wide range of rolling spring and flat wire brush electrodes or use electrodes from other manufacturers with optional adaptors - custom sizes available upon request Long Form Certificate of Calibration included with each instrument Conforms to ASTM D4787/D5162/G62, ISO 29601, NACE SP0188/SP0274/SP0490, AS3894.1 Kit Contents DeFelsko PosiTest HHD High voltage Holiday Detector Stick-Type 7.6 m (25') ground (earth) cable with ground clip 72 Wh Li-ion battery pack with built-in charge state indicator Smart charger with universal AC voltage input Stainless steel fan brush 50 cm (20" ) electrode rod with thumb screw Shoulder strap Instruction Manual Durable Pelican Storm case Long Form Certificate of Calibration traceable to NIST Two year warranty Features Simple Easy-to-use with bright, color LCD Ready to measure - comes with everything needed for testing Audibly and visibly alerts when flaws/holidays are detected Lightweight, ergonomic design provides comfortable all-day use, reducing fatigue Voltage calculator feature - choose one of 11 international standards, and input the coating thickness to automatically calculate the required test voltage Durable Rugged, environmentally sealed ABS plastic enclosure Weatherproof, dustproof, and shockproof Included hard shell case with custom foam inserts for superior protection Two year warranty Accurate Built-in certified voltmeter (crest meter, jeep meter) displays and regulates the voltage at the electrode Long Form Certificate of Calibration included with each instrument Conforms to national and international standards including ISO, ASTM, and NACE Powerful Strobe light and loud audible alarms emitted when a holiday is detected. Audio alarm mode can be adjusted for differing environments. Removable Smart lithium-ion battery with built-in charge state indicator Versatile A wide range of rolling spring electrodes and wire brushes are available. Custom sizes available upon request. Optional handheld wand accessory coverts the detector into a wand configuration ideal for testing hard-to-reach areas (suitable for voltages < 15 kV) Industry-standard connectors and adaptors for compatibility with nearly all existing electrodes User adjustable voltage range from 0.5 – 35 kV Safe Press and hold Safety Trigger helps prevent accidental high voltage generation 7.6 m (25') ground (earth) cable with locking connector and spring clamp Shock proof/creep proof - internally sealed to minimize creep distance to high voltage components. Designed in accordance with IEC 61010-1. Specifications Output Voltage Range 0.5-35 kV Output Voltage Adjustment 0.5 kV-1 kV: 10 Volt Steps1 kV-35 kV: 100 Volt Steps Output Accuracy ±5% Pulse Duration 10 μs Pulse Repetition Rate 30 Hz Coating Thickness Range up to 20 mm (780 mils)* Operating Temperature -20° to 60°C (-4° to 140°F) Case Pelican Storm extreme duty waterproof case Included Electrode Rod 50 cm (20") Shoulder Strap Included Battery Size 72 Wh Li-ion Typical Battery Life for selected rolling springs @ 10 kV - Ø 12" 40 hrs. Typical Battery Life for selected rolling springs @ 10 kV - Ø 40" 30 hrs. Weight 12 kg (27 lbs.) Dimensional Weight 19 kg (42 lbs.) Electrodes Rolling Spring Electrodes Rolling Spring Coil for 4” pipe (102 mm) OD HHDSPRING4 Rolling Spring Coil for 6” pipe (152 mm) OD HHDSPRING6 Rolling Spring Coil for 8” pipe (203 mm) OD HHDSPRING8 Rolling Spring Coil for 12” pipe (304 mm) OD HHDSPRING12 Rolling Spring Coil for 14” pipe (356 mm) OD HHDSPRING14 Rolling Spring Coil for 16” pipe (406 mm) OD HHDSPRING16 Rolling Spring Coil for 20” pipe (508 mm) OD HHDSPRING20 Rolling Spring Coil for 24” pipe (610 mm) OD HHDSPRING24 Please Note: Each spring includes two pre-installed spring couplers. A spring connector (HHDCONNECT) is required to attach the PosiTest HHD to the spring couplers. Custom sizes and bulk pricing available. Additional couplers (HHDCOUPLER - 2 pack) are available. Flat Wire Brush Electrodes HHD Flat Brush 51 mm/2” HHDFLTBRSH2 HHD Flat Brush 152 mm/6” HHDFLTBRSH6 HHD Flat Brush 203 mm/8” HHDFLTBRSH8 HHD Flat Brush 305 mm/12” HHDFLTBRSH12 HHD Flat Brush 610 mm/24” HHDFLTBRSH24 HHD Flat Brush 914 mm/36” HHDFLTBRSH36 HHD Flat Brush 1219 mm/48” HHDFLTBRSH48 Half-Circle Neoprene Brush Electrode Half-Circle Neoprene Brush for 50-127 mm/2-5" pipe OD HHDHCBRSH5 Accessories Rolling Spring Electrodes Steel pipe electrodes-assorted sizes available: 10 to 60 cm (4 – 24”) Rolling springs include two pre-installed spring couplers Flat Wire Brush Electrodes Stainless steel-assorted sizes available: 5 to 120 cm (2 – 48”) Replacement Fan Brush Electrode Stainless steel-5 cm (2”) Handheld Wand Converts the PosiTest HHD to a wand-type instrument *PosiTest HHD sold separately Extension Rods Choose between 13 cm (5") and 50 cm (20") rods Electrode Adaptors Connect to spring and brush electrodes from other manufacturers PosiTest HHD Verifier Standalone voltmeter (crest meter, jeep meter) for verifying the accuracy and operation of ALL pulse type and DC holiday detectors Spring Couplers Thread onto rolling springs and attach to the Spring Connector Spring Connectors Connect the PosiTest HHD to DeFelsko or SPY rolling spring electrodes HHD Half-Circle Neoprene Brush 50–127mm/2-5" Neoprene half-circle brush electrode for PosiTest HHD series - good for pipes 50 to 127 mm / 2 to 5 inches Downloads DeFelsko PosiTest HHD High Voltage Holiday Detector - Data Sheet DeFelsko PosiTest HHD High Voltage Holiday Detector - Instruction Manual English, Spanish, German, French DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Chinese DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Arabic DeFelsko PosiTest HHD High Voltage Holiday Detector - Full Guide Korean Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/holiday-detectors-c-97_181/defelsko-positest-hhd-c-97_181_174/defelsko-hhdkit-positest-hhd-kit-high-voltage-holiday-detector-p-1779.html Thu, 21 Mar 2024 04:41:13 +0000 USD 1779 DeFelsko 941 HHDKIT https://www.abqindustrial.net/store/images/DeFelsko-PosiTest-HHD-High-voltage-Holiday-Detector.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-fiber-wire-and-cable-transducers-p-1778.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1778 ]]>Achieve continuous, measurable quality control with Tensitron transducers for fiber and wire Transducers can be customized for your specific material or environment Achieve continuous, measurable quality control with Tensitron Fiber, Wire and Cable Transducers. Permanently mount the sensors and convert the tension to a reliable signal that can be output for remote display, high-speed recording, or automatic tension control. Tensitron Transducers can be customized for your specific material or environment. For example, we can change the roller type and dimensions, or incorporate your own rollers. Shown below are some of Tensitron's standard line of transducers which range from 1/10th gram to 500 lbs. Many models are available. Transducers can be customized to meet your needs Features Continuously monitor and record tension Precise, measurable quality control Uniquely suited to your project requirements Dependable, Convenient Tension Measurement Precise, high-speed sensors Continuous monitoring and recording Remote display Automatic process control Permanently mounted for stable readings Wide variety of designs to match the needs of your installation Customized rollers and calibration for your application Continuous Monitoring Solutions Select from Tape, Web, and Belt Transducers or Fiber, Wire, and Cable Transducers Choose a Signal Conditioner to utilize the signal Transducer system will be customized for your application Models Small Space Fiber Transducer Tension Range = 5 - 5,000 g Tensitron Transducers - Fiber and Wire - FT-107 Low Profile 3 Roller Sensor Tension Range = 5 - 5,000 g Tensitron Transducers - Fiber and Wire - FT-116 Single Roller Sensing Beam Tension Range = 5 - 5,000 g Tensitron Transducers - Fiber and Wire - FT-117 Small Space Transducer with Single Roller Tension Range = 5 - 5,000 g Tensitron Transducers - Fiber and Wire - E-415-002 Platform Mounted Fiber Transducer Tension Range = 5 - 5,000 g Tensitron Transducers - Fiber and Wire - F-1806 Tensitron's Low Force Load Cells can be gauged to measure tension up to 150 lbs. Tensitron Transducers - Fiber and Wire - E-090-000 3 Roller Low Force Load Cell Tension Range = 1 - 100 lb. Tensitron Transducers - Fiber and Wire - E-091-00 Tensitron's Notched Beam Transducers measure up to 1,000 lbs tension over several models. Tensitron Transducers - Fiber and Wire - E-095-01 3 Roller Notched Beam Transducer Tension Range = 10 - 1000 lb. Tensitron Transducers - Fiber and Wire - E-095-03 Downloads Tensitron Transducers - Fiber and Wire - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-fiber-wire-and-cable-transducers-p-1778.html Tue, 23 Apr 2024 20:59:51 +0000 USD 1778 Tensitron 1000 TFW https://www.abqindustrial.net/store/images/Tensitron-Transducers-Fiber-Wire.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/physical-therapy-strength-test-c-101_69/mark-10-myometer-kit-series-ekm5-p-1777.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1777 ]]>Mark-10 Myometer Kit Series EKM5 Includes a Series 5 advanced force gauge, looped strap, hook, tabletop mount, and accessories 200 lbF (1,000 N) capacity The Mark-10 EKM5-200 Myometer Kit facilitates a wide range of strength assessments and ergonomics studies. Featuring a Mark-10 Series 5 force gauge with 200 lbF (1,000 N) range, tabletop mount, strap, and accessories, this kit is ideal for ergonomists and other professionals Kit Contents Mark-10 Myometer Kit Series EKM5 Carrying case Tabletop mounting kit for force gauge, for vertical or horizontal orientations Adjustable length looped strap Clevis and clasp hook attachments AC adapter/charger MESUR® Lite data collection software USB cable NIST-traceable certificate of calibration with data Features Measures real time, average, and peak pull and push forces 200 lbF (1,000 N) force capacity Accuracy of ±0.1% of full scale Sampling rate of 7,000 Hz USB, RS-232, and analog outputs High / low limit indicators, for pass / fail and minimum force testing 1,000-point data memory with statistical calculations. Data may be bulk downloaded to included MESUR® Lite data collection software. Force gauge is compatible with other Mark-10 grips and attachments Specifications Accuracy ±0.1% of full scale Sampling rate 7,000 Hz Power Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use Battery life Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use Capacity x Resolution 200 x 0.05 lbF 3200 x 1 ozF 100 x 0.02 kgF 1000 x 0.2 N 1 x 0.0002 kN Outputs USB / RS-232: Configurable up to 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 VDC, ±0.25% of full scale at capacity General purpose: Three open drain outputs, one input Set points: Three open drain lines Safe overload 200% of full scale (display shows "OVER" at 110% and above) Warranty 3 years (see individual statement for further details) Downloads Mark-10 Myometer Kit Series EKM5 - Data Sheet Mark-10 Myometer Kit Series EKM5- Instruction Manual Mark-10 Myometer Kit Series EKM5 - Ergo Gauge Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/physical-therapy-strength-test-c-101_69/mark-10-myometer-kit-series-ekm5-p-1777.html Wed, 12 Oct 2022 17:28:51 +0000 USD 1777 Mark-10 999 EKM5 https://www.abqindustrial.net/store/images/Mark-10-Myometer-Kit-Series-EKM5.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitl3-g-positector-sst-soluble-salt-tester-latex-patch-advanced-kit-p-1776.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1776 ]]>DeFelsko SSTKITL3-G PosiTector SST Soluble Salt Tester Latex Patch Advanced Kit with PosiTector Advanced Gage Body, PosiTector SST Probe, Latex Adhesive Patch (25), Syringe and Needle (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITL3 Advanced Soluble Salt Tester Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SST Probe PRBSST Latex Adhesive Patch (25) Syringe and Needle (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity Standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitl3-g-positector-sst-soluble-salt-tester-latex-patch-advanced-kit-p-1776.html Wed, 23 Nov 2022 06:01:05 +0000 USD 1776 DeFelsko 998 SSTKITL3-E https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitl-advanced.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitl1-g-positector-sst-soluble-salt-tester-latex-patch-standard-kit-p-1775.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1775 ]]>DeFelsko SSTKITL1-G PosiTector SST Soluble Salt Tester Latex Patch Standard Kit with PosiTector Standard Gage Body, PosiTector SST Probe, Latex Adhesive Patch (25), Syringe and Needle (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITL1 Standard Soluble Salt Tester Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SST Probe PRBSST Latex Adhesive Patch (25) Syringe and Needle (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe—stored readings can be viewed or downloaded Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitl1-g-positector-sst-soluble-salt-tester-latex-patch-standard-kit-p-1775.html Wed, 23 Nov 2022 06:04:08 +0000 USD 1775 DeFelsko 997 SSTKITL1-E https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitl.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitd3-g-positector-sst-soluble-salt-tester-adhesive-patch-advanced-kit-p-1774.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1774 ]]>DeFelsko SSTKITD3-G PosiTector SST Soluble Salt Tester Adhesive Patch Advanced with PosiTector Advanced Gage Body, PosiTector SST Probe, DeFelsko Adhesive Patch (25), Syringe and Needle (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Long Form Certificate of Calibration showing traceability to NIST included. Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITD3 Advanced Soluble Salt Tester Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SST Probe PRBSST DeFelsko Adhesive Patch (25) Syringe and Needle (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity Standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitd3-g-positector-sst-soluble-salt-tester-adhesive-patch-advanced-kit-p-1774.html Fri, 21 Oct 2022 13:51:32 +0000 USD 1774 DeFelsko 1000 SSTKITD-3 https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitd-advanced.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitd1-g-positector-sst-soluble-salt-tester-adhesive-patch-standard-kit-p-1773.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1773 ]]>DeFelsko SSTKITD1-G PosiTector SST Soluble Salt Tester Adhesive Patch Standard Kit with PosiTector Standard Gage Body, PosiTector SST Probe, DeFelsko Adhesive Patch (25), Syringe and Needle (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Long Form Certificate of Calibration showing traceability to NIST included. Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITD1 Standard Soluble Salt Tester Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SST Probe PRBSST DeFelsko Adhesive Patch (25) Syringe and Needle (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Photo Gallery Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe—stored readings can be viewed or downloaded Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitd1-g-positector-sst-soluble-salt-tester-adhesive-patch-standard-kit-p-1773.html Tue, 18 Oct 2022 14:36:34 +0000 USD 1773 DeFelsko 994 SSTKITD-1 https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitd.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitp-positector-sst-soluble-salt-tester-posipatch-kit-and-probe-only-p-1772.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1772 ]]>DeFelsko SSTKITP PosiTector SST Soluble Salt Tester PosiPatch Kit & Probe Only (Gauge not Included) Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Long Form Certificate of Calibration showing traceability to NIST included. The DeFelsko SSTKITP PosiTector SST Soluble Salt Tester is ideal for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITPF Probe Only Soluble Salt Tester Kit includes: PosiTector SST Probe PRBSST PosiPatch (5) Standard Magnetic Ring Syringe and Plastic Tip (2) 250 ml DI Water and Cup (5) Foam swabs (5) PosiSoft Software Certified conductivity standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Full Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitp-positector-sst-soluble-salt-tester-posipatch-kit-and-probe-only-p-1772.html Tue, 18 Oct 2022 14:36:31 +0000 USD 1772 DeFelsko 957 SSTKITP https://www.abqindustrial.net/store/images/DeFelsko%20SSTKITP%20PosiTector%20Soluble%20Salt%20Tester.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitp3-g-positector-sst-soluble-salt-tester-posipatch-advanced-kit-p-1771.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1771 ]]>DeFelsko SSTKITP3-G PosiTector SST Soluble Salt Tester PosiPatch Advanced Kit with PosiTector Advanced Gage Body, PosiTector SST Probe, PosiPatch (5), Standard Magnetic Ring*, Syringe and Plastic Tip (2), 250 ml DI Water, Cup (5), Hard-shell Carrying Case Conductivity probe specifically designed for ISO 8502-6,9 Solvent, acid, oil, water and dust resistant – weatherproof Long Form Certificate of Calibration showing traceability to NIST included. Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. Kit Contents The DeFelsko PosiTector SSTKITP3 Advanced Soluble Salt Tester Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SST Probe PRBSST PosiPatch (5) Standard Magnetic Ring Syringe and Plastic Tip (2) 250 ml DI Water and Cup (5) Protective rubber holster Wrist strap and protective lens shield Foam swabs (5), belt clip 3 AAA alkaline batteries PosiSoft Software and USB cable Certified conductivity Standard Long Form Certificate of Calibration traceable to NIST Convenient Hard-shell Carrying Case and instructions Two (2) year warranty Features  Simple Conductivity probe specifically designed for ISO 8502-6,9 Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2) NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Easy 1-2-3 gage interface guides users through the Bresle test method Automatic storage of a background (blank) measurement—handy when performing multiple tests Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration showing traceability to NIST included Includes certified conductivity standard (calibration solution) to verify probe accuracy. Certificate included. Automatic temperature normalization and sample temperature reporting Conforms to ISO 8502-6/8502-9, US Navy NSI 009-32, US Navy PPI 63101-000, AS 3894.6, IMO MSC.215(82), IMO MSC.244(83), SSPC Guide 15, ISO 11127-6, ASTM D4940 Versatile PosiTector body accepts all PosiTector SST, 6000, 200, DPM, IRT, RTR, SPG, SHD, BHI, and UTG probes easily converting from a soluble salt tester to a coating thickness gage, dew point meter, surface profile gage, hardness tester, or ultrasonic wall thickness gage Ideal for determination of water-soluble contaminants in non-metallic blast media A selection of kits include everything needed to retrieve and analyze soluble salts on surfaces Adjustable for various patch volumes Selectable display languages NEW Auto rotating display with Flip Lock Powerful Track and record test duration in accordance with ISO 8502-6 NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Includes PosiSoft suite of software for viewing and reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Bresle Method Patch Options PosiPatch™ DeFelsko Adhesive Patch Latex Adhesive Patch Reusable patch with Standard or Flexible magnetic ring Self-adhesive, polyurethane patches Latex patch with easy-open tabs and low-tack adhesive for easy removal PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko SST Soluble Salt Tester Frequently Asked Questions Related Products DeFelsko PosiTector SST Bresle Method Patches For general purpose paint and coating applications. Downloads DeFelsko PosiTector SST Soluble Salt Tester - Literature DeFelsko PosiTector SST Soluble Salt Tester - Instruction Manual DeFelsko PosiTector SST Soluble Salt Tester - Online Instruction Manual with Videos Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-sst-c-97_54/defelsko-sstkitp3-g-positector-sst-soluble-salt-tester-posipatch-advanced-kit-p-1771.html Fri, 21 Oct 2022 13:51:29 +0000 USD 1771 DeFelsko 993 SSTKITP3-E https://www.abqindustrial.net/store/images/defelsko-positector-sst-kitp-advanced.jpeg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis4pk-positector-cmm-is-expansion-pack-4-pack-p-1768.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1768 ]]>DeFelsko CMMIS4PK PosiTector CMM IS Expansion Pack, 4 Pack: 4 CMM IS probes, 4 Saturated Salt Solutions, 4 Calibration Check Chambers, 4 Caps, 10 coin cell batteries Easily collect and report measurements in conformance with ASTM F2170 In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS 4PK In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: 4 CMM IS probes 4 Saturated Salt Solutions 4 Calibration Check Chambers 4 Caps 8 Stackable Probe Extensions 10 coin cell batteries *Add additional probes as required Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* 0.1% * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis4pk-positector-cmm-is-expansion-pack-4-pack-p-1768.html Fri, 12 Apr 2024 16:58:48 +0000 USD 1768 DeFelsko 998 CMMIS4PK https://www.abqindustrial.net/store/images/DeFelsko%20PosiTector%20CMMIS4PK%20In%20Situ%20Concrete%20Moisture.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis1pk-positector-cmm-is-expansion-kit-1-pack-p-1767.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1767 ]]>DeFelsko CMMISKITB PosiTector CMM IS Expansion Pack, 1 Pack: 1 CMM IS probe, 1 Saturated Salt Solution, 1 Calibration Check Chamber, 1 Cap, 2 coin cell batteries Easily collect and report measurements in conformance with ASTM F2170 In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS 1PK In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: 1 CMM IS probe 1 Saturated Salt Solution 1 Calibration Check Chamber 1 Cap 2 Stackable Probe Extensions 2 coin cell batteries *Add additional probes as required Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* 0.1% * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis1pk-positector-cmm-is-expansion-kit-1-pack-p-1767.html Fri, 12 Apr 2024 16:56:07 +0000 USD 1767 DeFelsko 998 CMMIS1PK https://www.abqindustrial.net/store/images/defelsko-positector-cmmis1pk-in-situ-concrete-moisture.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitp3-e-positector-cmm-is-in-situ-concrete-moisture-rh-meter-pro-kit-p-1766.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1766 ]]>DeFelsko CMMISKITP3-E PosiTector CMM IS In Situ Concrete Moisture RH Meter, Pro Kit: PosiTector DPM3 Advanced, 5 CMM IS probes, 5 Saturated Salt Solutions, 5 Calibration Check Chambers, 5 Caps, Extraction Tool, Tape Measure, Vacuum Tool Attachments, Ten A-76/LR-44 coin cell batteries, Hard shell carrying case Easily collect and report measurements in conformance with ASTM F2170 Combined sleeve and probe design simplifies the installation process and does not require consumables In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS KIT P3-E In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: PosiTector DPM3 Advanced 5 CMM IS probes 5 Saturated Salt Solutions 5 Calibration Check Chambers 5 Caps 10 Stackable Probe Extensions Extraction Tool Tape Measure Vacuum Tool Attachments Ten A-76/LR-44 coin cell batteries Hard shell carrying case Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitp3-e-positector-cmm-is-in-situ-concrete-moisture-rh-meter-pro-kit-p-1766.html Thu, 04 May 2023 23:22:09 +0000 USD 1766 DeFelsko 999 CMMISKITP3-E https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-CMMISKITP3-E-In-Situ-Concrete-Kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitc-positector-cmm-is-in-situ-concrete-moisture-rh-meter-complete-kit-p-1765.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1765 ]]>DeFelsko CMMISKITC PosiTector CMM IS In Situ Concrete Moisture RH Meter, Complete Kit: 5 CMM IS probes, 5 Saturated Salt Solutions, 5 Calibration Check Chambers, 5 Caps, Extraction Tool, Tape Measure, Vacuum Tool Attachments, Ten A-76/LR-44 coin cell batteries, Hard shell carrying case Easily collect and report measurements in conformance with ASTM F2170 Combined sleeve and probe design simplifies the installation process and does not require consumables In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS KIT C In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: 5 CMM IS probes 5 Saturated Salt Solutions 5 Calibration Check Chambers 5 Caps 10 Stackable Probe Extensions Extraction Tool Tape Measure Vacuum Tool Attachments Ten A-76/LR-44 coin cell batteries Hard shell carrying case Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitc-positector-cmm-is-in-situ-concrete-moisture-rh-meter-complete-kit-p-1765.html Thu, 04 May 2023 23:21:30 +0000 USD 1765 DeFelsko 989 CMMISKITC https://www.abqindustrial.net/store/images/DeFelsko%20PosiTector%20CMMISKITC%20In%20Situ%20Concrete%20Kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitb-positector-cmm-is-in-situ-concrete-moisture-rh-meter-basic-kit-p-1764.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1764 ]]>DeFelsko CMMISKITB PosiTector CMM IS In Situ Concrete Moisture RH Meter, Basic Kit: 3 CMM IS probes, 3 Saturated Salt Solutions, 3 Calibration Check Chambers, 3 Caps, Extraction Tool, Tape Measure, Ten A-76 / LR-44 coin cell batteries Easily collect and report measurements in conformance with ASTM F2170 Combined sleeve and probe design simplifies the installation process and does not require consumables In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS KIT B In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: 3 CMM IS probes 3 Saturated Salt Solutions 3 Calibration Check Chambers 3 Caps 6 Stackable Probe Extensions Extraction Tool Tape Measure Ten A-76/LR-44 coin cell batteries Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmiskitb-positector-cmm-is-in-situ-concrete-moisture-rh-meter-basic-kit-p-1764.html Thu, 04 May 2023 23:21:05 +0000 USD 1764 DeFelsko 994 CMMISKITB https://www.abqindustrial.net/store/images/DeFelsko%20PosiTector%20CMMISKITB%20In%20Situ%20Concrete%20Kit.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-dl-pzx-7dl-data-logging-precision-z-308-0001-z-308-0002-with-t-402-5507-p-1763.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1763 ]]>Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger with USB Output Resolution: .0001" (0.001 mm) Calibrate to known thickness or Select Material from 8 Presets 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Range with Standard Delay Line Transducer0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducersup to 36.00" / 915.0 mm The Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The PZX-7DL does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software. The PZX-7DL has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The PZX-7DL can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Kit Contents Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger With T-402-5507 Probe With Built-In Datalogger 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Large, backlit LCD display retains last reading Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm Includes NIST Traceable Calibration Certificate IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Optional serial RS-232 or Bluetooth output Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory)TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25"(64 x 131 x 32 mm) Warranty Gauge: 5 YearsProbes: 90 Days Total Measuring Range(Steel) 0.006 - 36.000 inches0.15 - 924 mm(depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Delay Line Tips for PZX-7DL P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - Instruction Manual (NEW MODEL) PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Data Sheet PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Instruction Manual (OLD MODEL) Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-dl-pzx-7dl-data-logging-precision-z-308-0001-z-308-0002-with-t-402-5507-p-1763.html Tue, 04 Jun 2024 20:35:21 +0000 USD 1763 Dakota Ultrasonics 999 PZX-7DL https://www.abqindustrial.net/store/images/PZX-7-Series-Precision-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-pzx-7-precision-ultrasonic-wall-thickness-gauge-z-307-0001-z-307-0002-p-1762.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1762 ]]>Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 for Thin Walls Resolution: .0001" (0.001 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Range with Standard Delay Line Transducer0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducersup to 36.00" / 915.0 mm The Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The PZX-7 has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The PZX-7 can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the PZX-7 does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required Kit Contents Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 T-402-5507 Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.0001 inch (0.001 mm) Large, backlit LCD display retains last reading Selectable units of inch or mm Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity USB Data output of single values for transfer to data collection devices (no internal memory) Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Optional serial RS-232 or Bluetooth output Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory)TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25"(64 x 131 x 32 mm) Warranty Gauge: 5 YearsProbes: 90 Days Total Measuring Range(Steel) 0.006 - 36.000 inches0.15 - 924 mm(depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Delay Line Tips for PZX-7 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - Instruction Manual (NEW MODEL) PZX-7 Precision Ultrasonic Wall Thickness Gauge - Data Sheet PZX-7 Precision Ultrasonic Wall Thickness Gauge - Instruction Manual (OLD MODEL) Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-pzx-7-precision-ultrasonic-wall-thickness-gauge-z-307-0001-z-307-0002-p-1762.html Tue, 04 Jun 2024 20:34:39 +0000 USD 1762 Dakota Ultrasonics 988 PZX-7 https://www.abqindustrial.net/store/images/PZX-7-Series-Precision-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dlx-data-logging-precision-ultrasonic-wall-thickness-gauge-with-usb-output-p-1761.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1761 ]]>Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output Resolution: .0001" (0.001 mm) Calibrate to known thickness or Select Material from 8 Presets 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducers up to 36.00" / 915.0 mm The Checkline TI-007DLX is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The TI-007DLX does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software. The TI-007DLX has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The TI-007DLX can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Kit Contents TI-007DLX Precision Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Large, backlit LCD display retains last reading Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Optional serial RS-232 or Bluetooth output IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25" (64 x 131 x 32 mm) Warranty Gauge: 5 Years Probes: 90 Days Total Measuring Range (Steel) 0.006 - 36.000 inches 0.15 - 924 mm (depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Delay Line Tips for TI-007DLX P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Data Sheet Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Instruction Manual Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Add Couplant Notice Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dlx-data-logging-precision-ultrasonic-wall-thickness-gauge-with-usb-output-p-1761.html Thu, 24 Feb 2022 20:24:42 +0000 USD 1761 Checkline 999 TI-007DLX https://www.abqindustrial.net/store/images/TI-25DLX-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6dl-thru-paint-ultrasonic-wall-thickness-gauge-z-306-0001-z-306-0003-p-1759.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1759 ]]>Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 with built-in memory & USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Built-in datalogging for 10,000 data values with USB Output Total Measuring Range Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.025 to 36.000 inches0.63 to 914.4 mmEcho-Echo Mode (Through Paint & Coatings) Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm (Acutal range depends upon probe selected) - five probes to choose from Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.040 to 8.00 inches1.00 to 199.9mm Echo-Echo Mode (Through Paint & Coatings)EE Mode0.100 to 1.000 inch2.54 to 25.40 mm The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in DAKVIEW4 Software (free download) The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 can be used with any of the following hi-damped dual-element transducers specifically designed for use when employing the E-E Thru-Paint Mode. Probes possibilities include: T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 Probe T-102-2700 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying Case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data values Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Includes NIST Traceable Calibration Certificate Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters)(range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 - Instruction Manual (NEW MANUAL) Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 - Data Sheet Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 - Instruction Manual (OLD MANUAL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6dl-thru-paint-ultrasonic-wall-thickness-gauge-z-306-0001-z-306-0003-p-1759.html Mon, 03 Jun 2024 17:58:44 +0000 USD 1759 Dakota Ultrasonics 996 ZX-6DL https://www.abqindustrial.net/store/images/ZX-6DL-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6-through-paint-ultrasonic-thickness-gauge-z-305-0001-z-305-0003-p-1758.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1758 ]]>Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NOSingle - Value USB Output Total Measuring Range Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.025 to 36.000 inches0.63 to 914.4 mm Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm Acutal range depends upon probe selected) - five probes to choose from Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo Mode (Pit & Flaw Detection) PE Mode0.040 to 8.00 inches1.00 to 199.9mm Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 Features include Automatic or Manual Probe Zero maximizing accuracy, 5-position Gain Adjustment to help located the correct backwall echo and to penetrate the walls on sound-attenuating materials such as cast metals and thick materials. It also features Differential mode, Hi-Low Alarms with audible and visual indicators and Scan mode that captures the minimum thickness at 100 measurements per second (100 Hz). It also includes a special Velocity Mode to measure in terms of velocity for nodularity testing. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The gauge and probe have a protection rating of IP67, is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 is covered by a 5-Year Limited Warranty, CE-certified and is proudly Made in the USA. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 can be used with any of the following hi-damped dual-element transducers specifically designed for use when employing the E-E Thru-Paint Mode. Probes possibilities include: T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Differential mode, Hi-Low Alarms with audible and visual indicators User-selected Manual or Auto Zero of Transducer The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Single value data output via USB port Selectable Backlight ON/OFF/AUTO Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Includes NIST Traceable Calibration Certificate Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters)(range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Time Dependent Gain (TDG) Used in both pulse-echo (P-E) and Echo-Echo (E-E) modes depending on transducer and frequency selected Pulser 150 volt square wave pulser Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 - Instruction Manual (NEW MANUAL) Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 - Data Sheet Dakota Ultrasonics ZX-6 Thru-Paint Ultrasonic Wall Thickness Gauge Z-305-0001 - Instruction Manual (OLD MANUAL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6-through-paint-ultrasonic-thickness-gauge-z-305-0001-z-305-0003-p-1758.html Mon, 03 Jun 2024 17:56:06 +0000 USD 1758 Dakota Ultrasonics 989 ZX-6 https://www.abqindustrial.net/store/images/ZX-6-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5dl-data-logging-ultrasonic-wall-thickness-gauge-z-304-0001-z-304-0003-p-1757.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1757 ]]>Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: YES Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 Probe Z-304-0001 with USB Output permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Includes NIST Traceable Calibration Certificate Data can be transferred into any program in ".csv" format or viewed in DAKVIEW4 Software (free download) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data values Selectable Backlight ON/OFF/AUTO User-selected Manual or Auto Zero of Transducer Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Update Rate 10 Hz (10 updates/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E) Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output - Data Sheet Dakota Ultrasonics ZX-5DL Data Logging Wall Thickness Gauge Z-304-0001 with USB Output - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5dl-data-logging-ultrasonic-wall-thickness-gauge-z-304-0001-z-304-0003-p-1757.html Mon, 03 Jun 2024 17:54:29 +0000 USD 1757 Dakota Ultrasonics 997 ZX-5DL https://www.abqindustrial.net/store/images/ZX-5DL-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5-ultrasonic-wall-thickness-gauge-z-303-0001-z-303-0003-p-1756.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1756 ]]>Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 / Z-303-0003 with T-102-2000 Probe with Single-Value USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO | Single-Value USB Output Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm  The Dakota Ultrasonics ZX-5 Wall Thickness GaugeZ-303-0001 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 is supplied with a USB-C port for transfer of a single data value to a PC or desired data collection program. It does NOT have any built-in memory. The ZX-5 permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-5 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 With T-102-2000 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Hi/Low Alarm Limits with Visual Indicator of Out of Tolerance Readings Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Single value data output via USB port Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA User-selected Manual or Auto Zero of Transducer Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range(Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range(Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Modes Pulse-Echo (P-E), Differential Output Type USB-C (single data value transfer, no built-in memory) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 / Z-303-0003 with T-102-2000 Probe - Instruction Manual (NEW MODEL) Dakota Ultrasonic Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 - Data Sheet Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 with T-102-2000 Probe - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5-ultrasonic-wall-thickness-gauge-z-303-0001-z-303-0003-p-1756.html Mon, 03 Jun 2024 17:53:01 +0000 USD 1756 Dakota Ultrasonics 991 ZX-5 https://www.abqindustrial.net/store/images/ZX-5-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-3-ultrasonic-wall-thickness-gauge-z-302-0001-z-302-0003-p-1755.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1755 ]]>Calibrate to known thickness or Select Material from 8 Presets Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe combines the best features of the ZX-2 allowing the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-3 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions Kit Contents Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm User-selected Manual or Auto Zero of Transducer User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe - Data Sheet Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-3-ultrasonic-wall-thickness-gauge-z-302-0001-z-302-0003-p-1755.html Mon, 03 Jun 2024 17:51:27 +0000 USD 1755 Dakota Ultrasonics 973 ZX-3 https://www.abqindustrial.net/store/images/ZX-3-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-2-ultrasonic-wall-thickness-gauge-z-301-0001-z-301-0003-p-1754.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1754 ]]>Manual Velocity Adjustment or Select Material from 8 Presets Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches0.60 - 199.9 mm  The Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The programmed velocity can be locked to prevent accidental adjustment. The preset materials are as follows: Steel 4340 .2330 n/μs / 5918 m/sec Stainless 303 .2230 / 5664 Aluminum 2024 .2510 / 6375 Cast Iron .1800 / 4572 Plexiglass .1060 / 2692 PVC .0940 / 2388 Polystyrene .0920 / 2337 Polyurethane .0700 / 1778 Custom Custom Kit Contents Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.001 inch (0.01 mm) The Transducer (probe) is waterproof and can be submerged in shallow water Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Switch-selected units for inches or mm The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Acoustic Velocity (calibration) is manually adjusted via the keypad 5 Year Warranty, CE-Certified and Made in USA Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.004 inch (0.1 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003- Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 - Data Sheet Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-2-ultrasonic-wall-thickness-gauge-z-301-0001-z-301-0003-p-1754.html Mon, 03 Jun 2024 17:50:30 +0000 USD 1754 Dakota Ultrasonics 978 ZX-2 https://www.abqindustrial.net/store/images/ZX-2-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-1-ultrasonic-wall-thickness-gauge-z-300-0001-z-300-0003-p-1753.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1753 ]]>Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 Manually adjust velocity to calibrate to any material type Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range in Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm  The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003allows the operator to adjust the acoustic velocity (speed of sound through a given material) from 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec to calibrate the gauge for use on a wide variety of materials. The programmed velocity can be locked to prevent accidental adjustment. Typically used on applications where a single material type is tested. It is designed for measuring wall thickness and the extent of corrosion on a wide range of materials. It is commonly used for checking the thickness of pipes, tanks, plates and other objects. It is designed and built to withstand harsh industrial conditions and is backed by a 5 year limited warranty. Kit Contents Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Selectable Backlight ON/OFF/AUTO Acoustic Velocity (calibration) is manually adjusted via the keypad Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The Transducer (probe) is waterproof and can be submerged in shallow water The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Operates on two (2) AA Batteries - 45 hours continuous operation Specifications Total Measuring Range (steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Weight 308 grams (11 ounces) Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Certifications NIST Traceable and MIL-STD-45662A To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 - Data Sheet Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-1-ultrasonic-wall-thickness-gauge-z-300-0001-z-300-0003-p-1753.html Mon, 03 Jun 2024 17:48:56 +0000 USD 1753 Dakota Ultrasonics 959 ZX-1 https://www.abqindustrial.net/store/images/Dakota-ZX-1-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlxt-thru-paint-ultrasonic-wall-thickness-gauge-with-datalogging-and-usb-output-p-1752.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1752 ]]>Checkline TI-25DLXT Data-Logging Thru-Paint Ultrasonic Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.040 to 8.00 inches / 1.00 to 199.9mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm Total Measuring Range (Probe Dependant) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.025 to 36.000 inches / 0.63 to 914.4 mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm The Checkline TI-25DLXT Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from one side. When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. The Checkline TI-25DLXT offers datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches and USB Output. Data can be transferred into any program in CSV format or viewed in Datacomm Software (free download). The TI-25DLXT permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocityand allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLXT's probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. The TI-25DLXT can be used with any of the following hi-damped dual-element transducers specifically designed for use with E-E Thru-Paint Mode. T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches  (0.63 to 500 millimeters) Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch  (2.54 to 25.40 millimeters) (range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge with Datalogging and USB Output - Data Sheet Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge with Datalogging and USB Output - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlxt-thru-paint-ultrasonic-wall-thickness-gauge-with-datalogging-and-usb-output-p-1752.html Thu, 24 Feb 2022 20:24:44 +0000 USD 1752 Checkline 997 TI-25DLXT https://www.abqindustrial.net/store/images/TI-25DLXT-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlx-data-logging-wall-thickness-gauge-with-usb-output-p-1751.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1751 ]]>Checkline TI-25DLX Data-Logging Ultrasonic Wall Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm  The Checkline TI-25DLX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) The Checkline TI-25DLX permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The calibration and other setup parameters can be locked to prevent any accidental adjustments. The TI-25DLX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions Kit Contents Checkline TI-25DLX Data Logging Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Hi/Low Alarm Limits with Visual Indicator of Out of Tolerance Readings Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO User-selected Manual or Auto Zero of Transducer Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Modes Pulse-Echo (P-E), Differential Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25DLX Data Logging Wall Thickness Gauge with USB Output - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlx-data-logging-wall-thickness-gauge-with-usb-output-p-1751.html Thu, 24 Feb 2022 20:24:43 +0000 USD 1751 Checkline 1000 TI-25DLX https://www.abqindustrial.net/store/images/TI-25DLX-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mxt-thru-paint-ultrasonic-wall-thickness-gauge-p-1750.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1750 ]]>Checkline TI-25MXT Thru-Paint Ultrasonic Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.040 to 8.00 inches / 1.00 to 199.9mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm Total Measuring Range (Probe Dependant) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.025 to 36.000 inches / 0.63 to 914.4 mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm The Checkline TI-25MXT Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from one side. When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. Checkline TI-25MXT Features include Automatic or Manual Probe Zero maximizing accuracy, 5-position Gain Adjustment to help located the correct backwall echo and to penetrate the walls on sound-attenuating materials such as cast metals and thick materials. It also features Differential mode, Hi-Low Alarms with audible and visual indicators and Scan mode that captures the minimum thickness at 100 measurements per second (100 Hz). It also includes a special Velocity Mode to measure in terms of velocity for nodularity testing. The gauge and probe have a protection rating of IP67, is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The TI-25MXT is covered by a 5-Year Limited Warranty, CE-certified and is proudly Made in the USA. The TI-25MXT can be used with any of the following hi-damped dual-element transducers specifically designed for use with E-E Thru-Paint Mode. T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Differential mode, Hi-Low Alarms with audible and visual indicators User-selected Manual or Auto Zero of Transducer The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Selectable Backlight ON/OFF/AUTO Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches  (0.63 to 500 millimeters) Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch  (2.54 to 25.40 millimeters) (range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Time Dependent Gain (TDG) Used in both pulse-echo (P-E) and Echo-Echo (E-E) modes depending on transducer and frequency selected Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Pulser 150 volt square wave pulser Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mxt-thru-paint-ultrasonic-wall-thickness-gauge-p-1750.html Thu, 24 Feb 2022 20:24:46 +0000 USD 1750 Checkline 994 TI-25MXT https://www.abqindustrial.net/store/images/TI-25MXT-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mx-ultrasonic-wall-thickness-gauge-p-1749.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1749 ]]>Checkline TI-25MX Ultrasonic Wall Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm  The Checkline TI-25MX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Checkline TI-25MX combines the best features of the TI-25SX allowing the operator to select from 8 preset materials as well as program 2 custom material velocities. The preset materials are as follows: Steel 4340 Stainless 303 Aluminum 2024 Cast Iron Plexiglass PVC Polystyrene Polyurethane Custom1 Custom2 Additionally, the user can adjustment of the velocity as desired and calibrate to a sample of known thickness - the optimal acoustic velocity is automatically calculated. In special circumstances, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The calibration and other setup parameters can be locked to prevent any accidental adjustments. The calibration can be locked to prevent any accidental adjustments. The TI-25MX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25MX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Checkline TI-25MX Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm User-selected Manual or Auto Zero of Transducer User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Scan Mode 100 Hz (100 updates/sec), Displays the lowest reading found during a scan Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 64 x 131 x 32 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Warranty Gauge: 5 Years Probes: 90 Days Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge Downloads Checkline TI-25MX Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25MX Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mx-ultrasonic-wall-thickness-gauge-p-1749.html Thu, 24 Feb 2022 20:24:45 +0000 USD 1749 Checkline 995 TI-25MX https://www.abqindustrial.net/store/images/TI-25MX-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25sx-general-purpose-ultrasonic-wall-thickness-gauge-p-1748.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1748 ]]>Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge with 8 Presets and Adjustable Velocity Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm  The Checkline TI-25SX allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The calibration can be locked to prevent any accidental adjustments. The preset materials are as follows: Steel 4340 Stainless 303 Aluminum 2024 Cast Iron Plexiglass PVC Polystyrene Polyurethane Custom1 Custom2 Kit Contents Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.001 inch (0.01 mm) The Transducer (probe) is waterproof and can be submerged in shallow water Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Switch-selected units for inches or mm The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Acoustic Velocity (calibration) is manually adjusted via the keypad 5 Year Warranty, CE-Certified and Made in USA Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.004 inch (0.1 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25sx-general-purpose-ultrasonic-wall-thickness-gauge-p-1748.html Thu, 24 Feb 2022 20:24:47 +0000 USD 1748 Checkline 981 TI-25SX https://www.abqindustrial.net/store/images/TI-25SX-General-Purpose-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25px-adjustable-velocity-ultrasonic-wall-thickness-gauge-p-1747.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1747 ]]>Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm The Checkline TI-25PX Wall Thickness Gauge is designed for measuring wall thickness and the extent of corrosion on a wide range of materials. It is commonly used for checking the thickness of pipes, tanks, plates and other objects. It is designed and built to withstand harsh industrial conditions and is backed by a 5 year limited warranty. The Checkline TI-25PX allows the operator to adjust the acoustic velocity (speed of sound through a given material) from 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec. The programmed velocity can be locked to prevent accidental adjustment. It is commonly used for applications where only a single material type is tested. Kit Contents Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Selectable Backlight ON/OFF/AUTO Acoustic Velocity (calibration) is manually adjusted via the keypad Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The Transducer (probe) is waterproof and can be submerged in shallow water The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)  to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Operates on two (2) AA Batteries - 45 hours continuous operation Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.040-6.000 inches 1.00-150.0 mm (with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Weight 308 grams (11 ounces) Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Certifications NIST Traceable and MIL-STD-45662A To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25px-adjustable-velocity-ultrasonic-wall-thickness-gauge-p-1747.html Tue, 07 Feb 2023 19:18:17 +0000 USD 1747 Checkline 993 TI-25PX https://www.abqindustrial.net/store/images/TI-25PX-Adjustable-Velocity-Ultrasonic-Wall-Thickness-Gauge.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-tape-belt-and-web-transducers-p-1746.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1746 ]]>Transducers - Web and Belt Remote Monitoring Transducers can be customized for your specific material or environment Remote Monitoring Achieve continuous, measurable quality control with Tensitron Tape, Belt and Web Transducers. Permanently mount the sensors and convert the tension to a reliable signal that can be output for remote display, high-speed recording, or automatic tension control. Tensitron Transducers can be customized for your specific material or environment. For example, we can change the roller type and dimensions, or incorporate your own rollers Features Continuously monitor and record tension Precise, measurable quality control Uniquely suited to your project requirements Dependable, Convenient Tension Measurement Precise, high-speed sensors Continuous monitoring and recording Remote display Automatic process control Permanently mounted for stable readings Wide variety of designs to match the needs of your installation Customized rollers and calibration for your application Continuous Monitoring Solutions Select from Tape, Web, and Belt Transducers or Fiber, Wire, and Cable Transducers Choose a Signal Conditioner to utilize the signal Transducer system will be customized for your application Applications Small Space Transducer with 3 Rollers. Typical range = 5-5000 g. Tensitron E-415-003 Transducer, Small Space, 3 Roller - Click to view 360° Low Force Load Cell with Cyindrical Rollers. Typical range = 1-100 lb. Tensitron E-091-02 Transducer, LFLC, Cylindrical Rollers - Click to view 360° S Column Transducer. Typical range = 5-250 lb. Tensitron E-210-00 Transducer, S Column - Click to view 360° Cantilever Transducer. Typical range = 1-25 lb. Tensitron E-200-00 Transducer, Cantilever - Click to view 360° Single Roller Web Transducer. Typical range = 2-200 lb. Tensitron 4260 Transducer, Web, Single Roller - Click to view 360° Pillow Block Load Cell Transducer. Typical range = 25-1,000 lb. Tensitron E-202-00 Transducer, Pillow Block - Click to view 360° Notched Beam Transducer with Cylindrical Roller. For web applications from 25-250 lb. Tensitron E-095-04 Transducer, Notched Beam, Cylindrical Roller - Click to view 360° Downloads Tensitron Transducers - Fiber and Wire - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-tape-belt-and-web-transducers-p-1746.html Thu, 15 Jun 2023 22:11:47 +0000 USD 1746 Tensitron 1000 4260 https://www.abqindustrial.net/store/images/Tensitron-Transducers-Web-Belt-Applications.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-transducers-signal-conditioners-p-1745.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1745 ]]>Process Signal From Transducers INFCS Series made by Omega-Newport Use Tensitron's signal conditioners/indicators with transducers for continuous monitoring applications. Signal Conditioners provide the necessary excitation, amplification, signal conditioning, calibration functions, display/readout and other options necessary to operate strain gauged transducers. The INFCS Series made by Omega-Newport is our best selling signal conditioner. It is a basic panel-mounted indicator with additional functions including scalable analog outputs, setpoints, and splash-proof NEMA-4 front covers. Description Model Description INFCS-000 B Basic Signal Conditioner, 115 VAC INFCS-001 B Basic Signal Conditioner, 115 VAC with Analog Out INFCS-010 B Basic Signal Conditioner, 115 VAC with dual 5A Relays INFCS-011 B Basic Signal Conditioner, 115 VAC with Analog Out and dual 5A Relays INFCS-100 B Basic Signal Conditioner, 230 VAC INFCS-101 B Basic Signal Conditioner, 230 VAC with Analog Out INFCS-110 B Basic Signal Conditioner, 230 VAC with dual 5A Relays INFCS-111 B Basic Signal Conditioner, 230 VAC with Analog Out and dual 5A Relays INFCS-411 B Basic Signal Conditioner, 10 to 30 VDC with Analog Out and dual 5A Relays Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-transducers-signal-conditioners-p-1745.html Wed, 07 Feb 2024 20:14:48 +0000 USD 1745 Tensitron 1000 INFCS https://www.abqindustrial.net/store/images/Tensitron-INFCS-Transducers-Signal-Conditioners.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-tr-mechanical-trigger-tension-meter-for-fine-wire-filaments-p-1744.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1744 ]]>Quick, easy, one-handed operation Lightweight, portable, and compact Durable construction Maintain process and quality control in manufacturing and testing environments with the Tensitron TR tension meters. The Mechanical Trigger Tension Meter for Fine Wire & Filaments is used to check tensions on wire, yarn, fiber optics, film, tape, narrow fabrics, and flat materials. TR instruments provide measurable tension control for the major wire, textile, coil winding, EDM, fiber optic, and synthetic materials industries. For EDM wire, order TR-4000. TR tension gauges are calibrated to one specific material for a direct tension reading. Digital instruments can be calibrated for up to ten different materials Kit Contents Tensitron TR Wire Filament Mechanical Tension Meter NIST-Traceable Calibration Certificate Operating Instructions Durable lightweight carrying case with protective foam inserts Features Quick, easy tension testing for fine wires, filaments, and other materials Improves yields and first quality Ensures consistency in your manufacturing or testing environments Dependable, Convenient Tension Measurement Quick, easy, one-handed operation Lightweight, portable, and compact Durable construction Measures moving or stationary materials Tension ranges from 0 to 5,000 grams Equipped with rollers for dynamic or static measurement Custom rollers available for specialized applications Mounting Bracket allows for continuous, hands-free monitoring (optional) Magnetic dampening stabilizes readings Right- or Left-Hand Operation Corrosion-resistant versions available for damp environments Includes carrying case and NIST-traceable calibration certificate Warrantied for one year against factory defects Versatile Tension Measurement for: Copper wire (up to 20 AWG) EDM wire, magnet wire (up to .8mm) Solid steel wire (up to .02”, .5mm) Stranded steel wire (up to .04”, 1mm) Yarn, thread, fibers, filaments Fiberglass roving Carbon fiber Fiber optic strands and thin cables Film, tape, ribbon (up to 1-1/2”, 38mm wide) Tubing (up to .2”, 6mm) Specifications Material TR meters are calibrated for a single material. For other materials, the meter will provide a repeatable reference but not a direct tension reading. The standard calibration is a textile filament. For other materials, send Tensitron a sample of your material and request a special calibration Dial TR meters have dial faces with black numbers for the first revolution of the pointer and red numbers for the second revolution Accuracy With standard calibration, accuracy is +/-8% full-scale. Higher accuracy (up to +/- 2%) may be achieved with a special calibration for your material and tension range Comparison Chart Model Range Minimum (Grams) Range Maximum (Grams) Accuracy (+/- 8% full scale) TR-25 3 25 +/- 2g TR-125 3 125 +/- 10g TR-250 3 250 +/- 20 TR-1000 5 1000 +/- 80g TR-2000 25 2000 +/- 160g TR-4000 50 4000 +/- 320g TR-5000 100 5000 +/- 400g * Calibrated for 1 material. Standard calibration is textile filament. Static or dynamic. For EDM wire, order TR-4000. V-groove roller for wire or filaments are standard. For other materials order Custom Roller Option. Downloads Tensitron TR Wire Filament Mechanical Tension Meter - Data Sheet Tensitron TR Wire Filament Mechanical Tension Meter - Operating Instructions Tensitron TR Wire Filament Mechanical Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-tr-mechanical-trigger-tension-meter-for-fine-wire-filaments-p-1744.html Tue, 09 Apr 2024 21:53:41 +0000 USD 1744 Tensitron 966 TR https://www.abqindustrial.net/store/images/Tensitron-TR-Wire-Filament-Mechanical-Tension-Meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-wx-1-digital-tension-meter-for-fabric-sheet-and-web-materials-p-1743.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1743 ]]>Up to 10 Calibrations - 1 Free Quick, easy operation Lightweight, portable Durable construction Ensure consistency in your manufacturing process with the Tensitron WX-1 tension meter. The Tensitron WX-1 Digital Fabric and Web Tension Meter measures the tension of wide, flexible, flat materials with thickness up to 1/8 inch. Use the WX-1 gauge to control quality for paper, film, plastic sheets, fabric, web, loom beams, metal foils, or winding electrical condensers Kit Contents Tensitron WX-1 Fabric and Web Tension Meter Re-chargeable NIMH battery assembly NIST-Traceable Calibration Certificate Power supply Operating Instructions Durable lightweight carrying case with protective foam inserts Features Fast & Versatile Quickly and easily test tension Quick, easy, one-handed operation Versatile measurement for: Fabric Paper Film Plastic sheets Metal foils Conveyor belts Accurate Improve safety and performance Measures wide, flat materials Custom-calibrated for your application Tension ranges from 0.5 to 1000 lb. Selectable units (lb, kg, or daN) Analog or serial output (optional) Dependable Save time and costs with durable construction Long-lasting durable construction Continuous or single-point data storage Includes carrying case and NIST-traceable calibration certificate Convenient User-friendly and easy to use Onboard data statistics Lightweight, portable Data averaging function evens out readings in fast-moving applications Easy-to-read, digital display Color-bar graphic provides quick visual of tension Specifications Accuracy Standard accuracy is +/- 2% full-scale. Accuracy may vary depending on the properties of the material measured. Rollers 1.44” overall length (contact surface 1.15”) at the end of 4” extensions Data Output Request Analog (Option A) OR RS-232 Serial (Option E) Battery NiMH (NOT lithium ion). Rechargeable. Up to 8 hours continuous use per charge Warranty One year, against factory defects Comparison Chart Model Range Min Range Max Resolution Lb Tolerance (+/-Full Scale) Lb WX-25-1 0.5 25 0.2 0.5 WX-50-1 5 50 0.2 1 WX-100-1 5 100 0.2 2 WX-250-1 5 250 0.2 5 WX-500-1 25 500 1 10 WX-1000-1 50 1000 5 20 *Contact about measuring more rigid materials and/or diameters up to 3/4 in. (19mm) Downloads Tensitron WX-1 Digital Tension Meter - Data Sheet Tensitron WX-1 Digital Tension Meter - Operating Instructions Tensitron WX-1 Digital Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/cable-tension-meters-c-98_31/tensitron-wx-1-digital-tension-meter-for-fabric-sheet-and-web-materials-p-1743.html Mon, 22 Apr 2024 22:45:02 +0000 USD 1743 Tensitron 990 WX-1 https://www.abqindustrial.net/store/images/Tensitron-WX-1-Fabric-Web-Tension-Meter.jpg https://www.abqindustrial.net/store/tension-meters-c-98/belt-tension-meters-c-98_6/tensitron-btx-1-digital-band-tension-meter-p-1742.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1742 ]]>Up to 10 Calibrations - 1 Free Quick, easy operation Lightweight, portable Durable construction Improve process control and production quality with the Tensitron BTX-1 tension meter. The Tensitron BTX-1 Digital Band Tension Meter measures the tension of narrow, flat materials, moving or stationary. The BTX-1 is ideal for nylon straps, seat belts, narrow poly web, flat drive belts, small V belts (up to 1/8 inch stationary), wide tape, and more. For stationary tie-down or ratchet straps up to 4 inches wide and 1/4 inch thick, use the Tensitron STX-1 strap tension meter. Kit Contents Tensitron BTX-1 Band Tension Meter Re-chargeable NIMH battery assembly NIST-Traceable Calibration Certificate Power supply Operating Instructions Durable lightweight carrying case with protective foam inserts Features Fast & Versatile Quickly and easily test band tension Quick, easy, one-handed operation Versatile measurement for: Nylon straps Seat belts Narrow poly web Flat drive belts Small V belts (up to 1/8” stationary) Accurate Improve safety and performance Custom-calibrated for your application Tension ranges from 0.51 to 500 lb. Selectable units (lb, kg, or daN) Analog or serial output (optional) Dependable Save time and costs with durable construction Long-lasting durable construction Secure-grip handle Continuous or single-point data storage Includes carrying case and NISTtraceable calibration certificate Convenient User-friendly and easy to transport Lightweight, portable Data averaging function evens out readings in fast-moving applications Easy-to-read, digital display Color-bar graphic provides quick visual of tension Specifications Full Scale Accuracy For the accuracy of each BTX-1 mode Power Requirements for Instrument Input* 9 VDC…2.2A Power Requirements for AC Adapter* 100-240V~50-60Hz 0.48A Battery Rechargeable NiMH, custom proprietary design Battery Life Battery lasts approximately 8 hours between charges, depending on backlighting intensity. Weight 3.1 lb Dimensions Dimensions 3.8” x 11.4” x 4.7” Environment Indoor or outdoor use, dust-free environment * Power Supply operates with input voltages from 100 –240V and includes several interchangeable adapters allowing use with European, U.S., Australian, English and other plug configurations. Comparison Chart Model Range Resolution Tolerance (+/- Full-Scale) Min Max Lb Lb BTX-25-1 3 25 0.2 0.5 BTX-50-1 5 50 0.2 1 BTX-100-1 5 100 0.2 2 BTX-250-1 5 250 0.2 5 BTX-500-1 25 500 1 10 Calibration BTX-1 meters are custom- calibrated for each material to be measured. See box below for details. Downloads Tensitron BTX-1 Band Tension Meter - Data Sheet Tensitron BTX-1 Band Tension Meter - Instructions Manual Tensitron BTX-1 Band Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/belt-tension-meters-c-98_6/tensitron-btx-1-digital-band-tension-meter-p-1742.html Mon, 22 Apr 2024 17:48:31 +0000 USD 1742 Tensitron 973 BTX-1 https://www.abqindustrial.net/store/images/Tensitron-BTX-1-Band-Tension-Meter.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/physical-therapy-strength-test-c-101_69/mark-10-series-e-ergonomics-force-gauges-kit-eke-p-1741.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1741 ]]>Mark-10 Series E Ergonomics Force Gauges Kit EKE Measure real time and peak push and pull forces Click-LockTM accessory mounting technology USB data output Mark-10 Series E Ergonomics Force Gauge make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. The Mark-10 Series E presents the ergonomist and other professionals with a simple and economical testing solution. 100 lbF, 200 lbF and 500 lbF (500, 2,500, and 5,000 N) capacity force gauges are available, along with a wide range of attachments for various applications. Select a pre-configured kit, including a gauge, accessories, and carrying case, or select each item individually to suit your needs. Attachments click and lock into place via innovative Click-Lock™ technology, a rugged anti-rotation locking mechanism. The attachments may be clicked into 90° or 180° orientations. No fastening is required, as with conventional force gauges, thereby reducing the risk of damage to the instrument. Kit Contents Advanced Kits: Mark-10 ME Digital Force Gage E1003 Rectangular Padded attach E1004 Curved Padded attach E1006 Hook E1009 Double Handle Grip E1000 Small Carrying Case  Professional Kits: Mark-10 ME Digital Force Gage E1002 Square Padded attach E1003 Rectangular Padded attach E1004 Curved Padded attach E1005 Circular Padded attach E1006 Hook E1007 Chain / Hook Assembly E1008 Single Handle Grip E1009 Double Handle Grip E1010 Pistol Grip E1001 Large Carrying Case  * Kits include a force gauge with 110V AC adapter. Features Measure real time and peak push and pull forces Three measuring ranges: 100, 200, and 500 lbF (500, 1000, and 2,500 N) Click-Lock™ accessory mounting technology USB data output High / low limit indicators, for pass / fail and minimum force testing Averaging mode calculates average force over a period of time 5,000-point data memory - data points may be saved individually orlogged continuously at up to 7,000 Hz. Data points may be bulk downloaded to included MESUR™ Lite data collection software. Statistical calculations for saved data points Specifications Accuracy ±0.2% of Full Scale Sampling rate 7,000 Hz Power AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. Battery Life Backlight on: up to 7 hours of continuous useBacklight off: up to 24 hours of continuous use Measurement units lbF, ozF, gF, kgF, N, kN (depending on model) USB Output Configurable up to 115,200 baud Safe overload 200% of full scale (display shows "OVER" at 110% and above) Weight 1.7 lb (0.8 kg) Included items Carrying case, universal voltage AC adapter, battery, USB cable, resource CD (USB driver, MESUR™Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user's guide), NIST-traceable certificate of calibration with data Warranty 3 years Ranges (Capacity / Resolution) Model lbF ozF kgF gF N kN ME-100 1000.002 16000.5 500.01 5000010 5000.1 - ME-200 2000.05 32001 1000.02 - 10000.2 10.0002 ME-500 5000.1 80002 2500.2 - 25000.5 2.50.0005 Ordering Guide EKE-100-1 Advanced ergonomics kit, 100 lbF / 500 N EKE-200-1 Advanced ergonomics kit, 200 lbF / 1,000 N EKE-500-1 Advanced ergonomics kit, 500 lbF / 2,500 N EKE-100-2 Professional ergonomics kit, 100 lbF / 500 N EKE-200-2 Professional ergonomics kit, 200 lbF / 1,000 N EKE-500-2 Professional ergonomics kit, 500 lbF / 2,500 N Related Products Mark-10 Series E Ergonomics Force Gauge ME 3 Capacities up to 500 Accessories         Model Description Advanced Kit1EKE-100-1EKE-200-1EKE-500-1 Professional Kit1EKE-100-2EKE-200-2EKE-500-2 ME-100ME-200ME-500 Ergonomics force gauge E1002 Padded attach., square   E1003 Padded attach., rectangular E1004 Padded attach., curved E1005 Padded attach., circular   E1006 Hook E1007 Chain / hook assembly   E1008 Single handle grip   E1009 Double handle grip E1010 Pistol grip   E1011 Grip adapter     E1012 Looped cable2     E1013 Myometer kit3     E1000 Carrying case, small   E1001 Carrying case, large   Kits include a force gauge with 110V AC adapter. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or ‘A’ for Australian plug. Ex: EKE-100-1E Does not fit into carrying cases Does not fit into carrying cases. Requires E1006 hook Downloads Mark-10 Series E Ergonomics Force Gauges Kit EKE - Data Sheet Mark-10 Series E Ergonomics Force Gauges Kit EKE - Instruction Manual Mark-10 Series E Ergonomics Force Gauges Kit EKE - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/physical-therapy-strength-test-c-101_69/mark-10-series-e-ergonomics-force-gauges-kit-eke-p-1741.html Mon, 05 Aug 2024 20:43:16 +0000 USD 1741 Mark-10 988 Series-E https://www.abqindustrial.net/store/images/Mark-10-Ergonomics%20Force%20Gauges-01.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcdftc-positest-pc-powder-inspection-kit-with-positest-dft-combo-p-1740.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1740 ]]>DeFelsko KITPCDFTC PosiTest PC Powder Inspection Kit with PosiTest DFT Combo Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* — ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko KITPCDFTC PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage DeFelsko PosiTest DFT Combo Gage Choice of dry film thickness gage Two DeFelsko Powder Combs(models 1 and 4) Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Literature DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcdftc-positest-pc-powder-inspection-kit-with-positest-dft-combo-p-1740.html Tue, 18 Oct 2022 14:41:43 +0000 USD 1740 DeFelsko 1000 KITPCDFTC https://www.abqindustrial.net/store/images/DeFelsko-KITPCDFTC-PosiTest-PC-Powder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfns1-positest-pc-powder-inspection-kit-with-positector-6000-fns1-standard-p-1739.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1739 ]]>DeFelsko KITPCFNS1 PosiTest PC Powder Inspection Kit with PosiTector 6000 FNS1 Standard Body All Metals Coating Thickness Gage Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* — ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko KITPCFNS1 PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage DeFelsko PosiTector 6000 FNS1 Standard Coating Thickness Gage (ferrous & non-ferrous) Choice of dry film thickness gage Two DeFelsko Powder Combs(models 1 and 4) Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Literature DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfns1-positest-pc-powder-inspection-kit-with-positector-6000-fns1-standard-p-1739.html Tue, 18 Oct 2022 14:41:45 +0000 USD 1739 DeFelsko 997 KITPCFNS1 https://www.abqindustrial.net/store/images/DeFelsko-KITPCFNS1-PosiTest-PC-Powder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfs1-positest-pc-powder-inspection-kit-with-positector-6000-fs1-standard-p-1738.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1738 ]]>DeFelsko KITPCFS1 PosiTest PC Powder Inspection Kit with PosiTector 6000 FS1 Standard Body Ferrous Metals Coating Thickness Gage Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* — ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko KITPCFS1 PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage DeFelsko PosiTector 6000 FS1 Standard Coating Thickness Gage (ferrous only) Choice of dry film thickness gage Two DeFelsko Powder Combs(models 1 and 4) Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Literature DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfs1-positest-pc-powder-inspection-kit-with-positector-6000-fs1-standard-p-1738.html Tue, 18 Oct 2022 14:41:44 +0000 USD 1738 DeFelsko 999 KITPCFS1 https://www.abqindustrial.net/store/images/DeFelsko-KITPCFS1-PosiTest-PC-Powder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfns3-positest-pc-powder-inspection-kit-with-positector-6000-fns3-advanced-p-1737.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1737 ]]>DeFelsko KITPCFNS3 PosiTest PC Powder Inspection Kit with PosiTector 6000 FNS3 Advanced Ferrous & Non-ferrous Coating Thickness Gage Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* — ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko KITPCFNS3 PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage DeFelsko PosiTector 6000 FNS3 Advanced Coating Thickness Gage (ferrous & non-ferrous) Choice of dry film thickness gage Two DeFelsko Powder Combs(models 1 and 4) Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Literature DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcfns3-positest-pc-powder-inspection-kit-with-positector-6000-fns3-advanced-p-1737.html Tue, 18 Oct 2022 14:41:46 +0000 USD 1737 DeFelsko 996 KITPCFNS3 https://www.abqindustrial.net/store/images/DeFelsko-KITPCFNS3-PosiTest-PC-Powder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-gm-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-8-mils-p-1736.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1736 ]]>DeFelsko PosiTest GM Magnetic Pull-Off Coating Thickness Gage for Non-Magnetic Coatings on Steel Banana Gauge Application: Electroplating, thin paint films, phosphating on steel Scale GM: 0-8 mils Strong, wear resistant, ruby-tipped probe The DeFelsko PosiTest GM magnetic pull-off thickness gage is ideal for the non-destructive measurement of non-magnetic coatings (Electroplating, thin paint films, phosphating) on steel. Kit Content The DeFelsko PosiTest GM Coating Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest GM Magnetic Pull-Off Coating Thickness Gage Wrist strap and instructions in a high quality leather case with belt loops for your convenience Certificate of Calibration showing traceability to PTB Two (2) year warranty Features Simple Positive visual and audible indicators to designate when thickness reading is established “V” grooves in probe housing and Gage base allow correct positioning on cylindrical objects Compact, lightweight, precisely balanced, independent of gravity – can be used in any position GO/NO-GO button can be pre-set for rapid measurement Probe contact and dial rotation all in a one-finger operation Furnished with wrist strap and instructions in a high quality leather case with belt loops for your convenience Durable Extra rugged housing, not affected by mechanical shock, water, acid or solvents Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement Can be used fully supported or with only the front probe area contacting the surface Functions on a permanent rare-earth cobalt magnet No batteries/electronics 2 year warranty Accurate Certificate of Calibration showing traceability to PTB included with every gage Matching Calibration Standards and Procedures available for every model Highly wear resistant Carbide Probe for longest life and continuous accuracy Remove center of dial cover for easy calibration adjustment Conforms to national and international standardsle Downloads DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Stee - Instruction Manual DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-gm-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-8-mils-p-1736.html Tue, 02 Apr 2024 16:30:56 +0000 USD 1736 DeFelsko 994 PosiTestGM https://www.abqindustrial.net/store/images/PosiTest-Magnetic-Pull-Off-Coating-Thickness-Gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-f-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-2000-microns-p-1735.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1735 ]]>DeFelsko PosiTest F Magnetic Pull-Off Coating Thickness Gages for Non-Magnetic Coatings on Steel Banana Gauge Application: Hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings on steel Scale F: 0-2000 µm Strong, wear resistant, ruby-tipped probe The DeFelsko PosiTest F magnetic pull-off thickness gage, Banana Gauge, is ideal for the non-destructive measurement of non-magnetic coatings (hot dip galvanizing, hard chrome metalizing, paint, enamel, plastic coatings) on steel. Kit Content The DeFelsko PosiTest F Coating Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest F Magnetic Pull-Off Coating Thickness Gage Wrist strap and instructions in a high quality leather case with belt loops for your convenience Certificate of Calibration showing traceability to PTB Two (2) year warranty Features Simple Positive visual and audible indicators to designate when thickness reading is established “V” grooves in probe housing and Gage base allow correct positioning on cylindrical objects Compact, lightweight, precisely balanced, independent of gravity – can be used in any position GO/NO-GO button can be pre-set for rapid measurement Probe contact and dial rotation all in a one-finger operation Furnished with wrist strap and instructions in a high quality leather case with belt loops for your convenience Durable Extra rugged housing, not affected by mechanical shock, water, acid or solvents Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement Can be used fully supported or with only the front probe area contacting the surface Functions on a permanent rare-earth cobalt magnet No batteries/electronics 2 year warranty Accurate Certificate of Calibration showing traceability to PTB included with every gage Matching Calibration Standards and Procedures available for every model Highly wear resistant Carbide Probe for longest life and continuous accuracy Remove center of dial cover for easy calibration adjustment Conforms to national and international standardsle Downloads DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Stee - Instruction Manual DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-f-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-2000-microns-p-1735.html Tue, 02 Apr 2024 16:30:55 +0000 USD 1735 DeFelsko 1000 PosiTestF https://www.abqindustrial.net/store/images/PosiTest-Magnetic-Pull-Off-Coating-Thickness-Gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-g-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-200-microns-p-1734.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1734 ]]>DeFelsko PosiTest G Magnetic Pull-Off Coating Thickness Gages for Non-Magnetic Coatings on Steel Banana Gauge Application: Electroplating, thin paint films, phosphating on steel Scale G: 0-200 µm Strong, wear resistant, ruby-tipped probe The DeFelsko PosiTest GM magnetic pull-off thickness gage, Banana Gauge, is ideal for the non-destructive measurement of non-magnetic coatings (Electroplating, thin paint films, phosphating) on steel. Kit Content The DeFelsko PosiTest F Coating Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest G Magnetic Pull-Off Coating Thickness Gage Wrist strap and instructions in a high quality leather case with belt loops for your convenience Certificate of Calibration showing traceability to PTB Two (2) year warranty Features Simple Positive visual and audible indicators to designate when thickness reading is established “V” grooves in probe housing and Gage base allow correct positioning on cylindrical objects Compact, lightweight, precisely balanced, independent of gravity – can be used in any position GO/NO-GO button can be pre-set for rapid measurement Probe contact and dial rotation all in a one-finger operation Furnished with wrist strap and instructions in a high quality leather case with belt loops for your convenience Durable Extra rugged housing, not affected by mechanical shock, water, acid or solvents Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement Can be used fully supported or with only the front probe area contacting the surface Functions on a permanent rare-earth cobalt magnet No batteries/electronics 2 year warranty Accurate Certificate of Calibration showing traceability to PTB included with every gage Matching Calibration Standards and Procedures available for every model Highly wear resistant Carbide Probe for longest life and continuous accuracy Remove center of dial cover for easy calibration adjustment Conforms to national and international standardsle Downloads DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Stee - Instruction Manual DeFelsko PosiTest Pull-off Gages Magnetic Coating Thickness Gages for Non-Magnetic Coatings on Steel - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pull-off-gages-c-97_119/defelsko-positest-g-magnetic-pull-off-coating-thickness-gage-banana-gauge-scale-0-200-microns-p-1734.html Tue, 02 Apr 2024 16:30:54 +0000 USD 1734 DeFelsko 993 PosiTestG https://www.abqindustrial.net/store/images/PosiTest-Magnetic-Pull-Off-Coating-Thickness-Gauge.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-dft-c-97_120/defelsko-dftc-positest-dft-combo-coating-thickness-gage-dry-film-thickness-gauge-p-1733.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1733 ]]>DeFelsko DFTC PosiTest DFT Combo Coating Thickness Gage for ferrous and non-ferrous metal substrates Dry Film Thickness Gauge Measures both non-magnetic coatings on steel and non-conductive coatings on aluminum, brass, etc. The DeFelsko DFT is the ideal instrument for Powder Coaters, Paint Applicators, Coating Inspectors, Automotive Detailers, Refinishers and Inspectors Automatically recognizes the substrate and takes a measurement Measuring Range: 0-40 mils (0-1000 um) Zero or 1 Point Calibration Adjustment for complex applications Strong, wear resistant, ruby-tipped probe The DeFelsko DFTC-C PosiTest DFT Combo Coating Thickness Gage, Dry Film Thickness Gauge, measures both non-magnetic coatings on steel AND non-conductive coatings on aluminum, brass, etc. It is the economical choice that retains the uncompromising quality of DeFelsko coating thickness and inspection instruments. Accurate and economical the DFT is the ideal instrument for Powder Coaters, Paint Applicators, Coating Inspectors, Automotive Detailers, Refinishers and Inspectors... Easy-to-read oversized LCD display is reversible for reading when inverted. Kit Contents The DeFelsko PosiTest DFT C Combo Coating Thickness Gage Kit includes everything needed for testing: PosiTest DFTF-C Combo Coating Thickness Gage Wrist strap, precision plastic shims Hard shell storage case, 2 AAA alkaline Batteries, instructions, Long Form Certificate of Calibration traceable to PTB Two year warranty Features Simple Fast, repeatable measurements - 60+ readings per minute Ready to measure - No adjustment required for most applications Durable Strong, wear-resistant, ruby-tipped probe Two year warranty Accurate Zero or 1 Point Calibration Adjustment for complex applications Onscreen averaging for up to 99 readings Versatile V-groove in probe for positioning on curved parts High contrast color display Adjustable display brightness for optimal visibility in all environments Auto rotating display with rotation lock Simple icon based menu Mils/microns switchable Built-in wrist strap for added convenience and safety Mils/Microns switchable Ideal For: Powder Coaters Paint Applicators and Contractors Coating Inspectors Automotive Detailers, Refinishers and Inspectors Specifications Measurement Range 0 – 40 mils 0 – 1000 μm Accuracy ± (0.1 mils + 3%) ± (2 μm + 3%) Size 108 x 43 x 20 mm (4.25 " x 1.7" x 0.8") Weight 54 g (1.9 oz.) without batteries FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest DFT Frequently Asked Questions Downloads DeFelsko DFTC-C PosiTest DFT Combo Coating Thickness Gage DFT for ALL Metal Substrates - Literature DeFelsko DFTC-C PosiTest DFT Combo Coating Thickness Gage DFT for ALL Metal Substrates - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-dft-c-97_120/defelsko-dftc-positest-dft-combo-coating-thickness-gage-dry-film-thickness-gauge-p-1733.html Wed, 14 Feb 2024 17:37:35 +0000 USD 1733 DeFelsko 859 DFTC https://www.abqindustrial.net/store/images/DeFelsko-PosiTest-DFT-Combo.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgts-b-positector-spg-surface-profile-gage-cabled-probe-only-for-concrete-profile-p-1732.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1732 ]]>DeFelsko PRBSPGTS-B PosiTector SPG Surface Profile Gage Cabled Probe Only for Concrete Profile Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others Gage Body Sold Separately The DeFelsko PRBSPGTS-B PosiTector SPG Surface Profile Gage Cabled Probe for Concrete Profile is designed to measure and record peak to valley surface profile heights on concrete surfaces. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Quick Guide DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Full Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages - Order Guide DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgts-b-positector-spg-surface-profile-gage-cabled-probe-only-for-concrete-profile-p-1732.html Tue, 30 Jul 2024 17:02:00 +0000 USD 1732 DeFelsko 999 PRBSPGTS https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-PRBSPGTS-Probe-Separate.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgcs-b-positector-spg-surface-profile-gage-cabled-probe-only-for-textured-coatings-p-1731.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1731 ]]>DeFelsko PRBSPGCS-B PosiTector SPG Surface Profile Gage Cabled Probe Only for Textured Coatings Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others PosiTector gage bodies are compatible with the full range of PosiTector 6000, 200, DPM, IRT, SPG, RTR, SST, SHD, BHI and UTG probes The DeFelsko PRBSPGCS-B PosiTector SPG Surface Profile Gage Cabled Probe is designed to measure and record peak to valley surface profile heights on textured coatings. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Quick Guide DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Full Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages - Order Guide DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-prbspgcs-b-positector-spg-surface-profile-gage-cabled-probe-only-for-textured-coatings-p-1731.html Tue, 30 Jul 2024 17:01:20 +0000 USD 1731 DeFelsko 997 PRBSPGCS https://www.abqindustrial.net/store/images/DeFelsko-PosiTector-PRBSPGCS-Probe-Separate.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgs1-g-positector-spg-s1-standard-surface-profile-gage-for-blasted-steel-p-1728.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1728 ]]>DeFelsko SPGS1-G PosiTector SPG S1 Standard Surface Profile Gage with PRBSPGS-B Cabled Probe for Blasted Steel, Range: 0 to 500 um (0-20 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGS1-G PosiTector SPG S1 Standard Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on blasted steel. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPG S1 Standard Surface Profile Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SPGS E Probe PRBSPGSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgs1-g-positector-spg-s1-standard-surface-profile-gage-for-blasted-steel-p-1728.html Wed, 19 Jul 2023 03:31:32 +0000 USD 1728 DeFelsko 980 SPGS1 https://www.abqindustrial.net/store/images/defelsko-positector-spg-s.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spg3-g-positector-spg-3-advanced-surface-profile-gage-for-blasted-steel-p-1727.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1727 ]]>DeFelsko SPG3-G PosiTector SPG 3 Advanced Surface Profile Gage with PRBSPG-B Integral Probe for Blasted Steel, Range: 0 to 500 um (0-20 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPG3-G PosiTector SPG 3 Advanced Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on blasted steel. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPG 3 Advanced Surface Profile Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SPG E Probe PRBSPGE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spg3-g-positector-spg-3-advanced-surface-profile-gage-for-blasted-steel-p-1727.html Tue, 30 Jul 2024 16:56:11 +0000 USD 1727 DeFelsko 1000 SPG3-E https://www.abqindustrial.net/store/images/defelsko-positector-spg.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgcs3-g-positector-spg-cs-advanced-surface-profile-gage-for-textured-coatings-p-1726.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1726 ]]>Price: $ 1,175.00 DeFelsko SPGCS3-G PosiTector SPG CS Advanced Surface Profile Gage with PRBSPGCS-B Cabled Probe for Textured Coatings, Range: 0 to 1500 um (0-60 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGCS3-G PosiTector SPG CS Advanced Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on textured coatings. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGS 3 Advanced Surface Profile Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SPGCS E Probe PRBSPGCSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgcs3-g-positector-spg-cs-advanced-surface-profile-gage-for-textured-coatings-p-1726.html Tue, 30 Jul 2024 16:58:15 +0000 USD 1726 DeFelsko 1000 SPGCS3 https://www.abqindustrial.net/store/images/products/defelsko-positector-spg-cs.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgts3-g-positector-spg-ts-advanced-surface-profile-gage-for-concrete-surface-profile-p-1725.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1725 ]]>DeFelsko SPGTS3-G PosiTector SPG TS Advanced Surface Profile Gage with PRBSPGTS-B Cabled Probe for Concrete Surface Profile, Range: 0 to 6 mm (0-250 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGTS3-G PosiTector SPG TS Advanced Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on concrete surfaces. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGTS 1 Standard Surface Profile Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SPGTS E Probe PRBSPGTSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgts3-g-positector-spg-ts-advanced-surface-profile-gage-for-concrete-surface-profile-p-1725.html Tue, 30 Jul 2024 16:58:54 +0000 USD 1725 DeFelsko 997 SPGTS3 https://www.abqindustrial.net/store/images/defelsko-positector-spg-ts.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgs3-g-positector-spg-s3-advanced-surface-profile-gage-for-blasted-steel-p-1724.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1724 ]]>DeFelsko SPGS3-G PosiTector SPG S3 Advanced Surface Profile Gage with PRBSPGS-B Cabled Probe for Blasted Steel, Range: 0 to 500 um (0-20 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGS3-G PosiTector SPG S3 Advanced Surface Profile Gage for Blasted Steel is a precise, rugged tester designed to measure and record peak to valley surface profile heights on blasted steel. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPG S3 Advanced Surface Profile Gages Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector SPGS E Probe PRBSPGSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches SmartBatch™ allows entry of user-defined parameters and criteria to for quick statistical analysis comply with standards such as ASTM D4417 and SSPC PA-17 Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and. more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgs3-g-positector-spg-s3-advanced-surface-profile-gage-for-blasted-steel-p-1724.html Tue, 30 Jul 2024 16:56:50 +0000 USD 1724 DeFelsko 999 SPGS3 https://www.abqindustrial.net/store/images/defelsko-positector-spg-s.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgts1-g-positector-spg-ts-standard-surface-profile-gage-for-concrete-surface-profile-p-1723.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1723 ]]>DeFelsko SPGTS1-G PosiTector SPG TS Standard Surface Profile Gage with PRBSPGTS-B Cabled Probe for Concrete Surface Profile, Range: 0 to 6 mm (0-250 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGTS1-G PosiTector SPG TS Standard Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on concrete surfaces. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGTS 1 Standard Surface Profile Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SPGTS E Probe PRBSPGTSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgts1-g-positector-spg-ts-standard-surface-profile-gage-for-concrete-surface-profile-p-1723.html Tue, 30 Jul 2024 16:55:32 +0000 USD 1723 DeFelsko 1000 SPGTS1 https://www.abqindustrial.net/store/images/defelsko-positector-spg-ts.jpg https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgcs1-g-positector-spg-cs-standard-surface-profile-gage-for-textured-coatings-p-1722.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1722 ]]>DeFelsko SPGCS1-G PosiTector SPG CS Standard Surface Profile Gage with PRBSPGCS-B Cabled Probe for Textured Coatings, Range: 0 to 1500 um (0-60 mils) Measures and records peak to valley surface profile heights Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others The DeFelsko SPGCS1-G PosiTector SPG CS Standard Surface Profile Gage is a precise, rugged tester designed to measure and record peak to valley surface profile heights on textured coatings. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip), U.S. Navy NSI 009-32, SANS 5772 and others. Kit Contents  The DeFelsko PosiTector SPGS 1 Standard Surface Profile Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector SPGCS E Probe PRBSPGCSE Glass zero plate and metal check shim Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to PTB Nylon carrying case and instructions Two (2) year warranty Features Simple Fast measurement rate of over 50 readings per minute—ideal for quickly and accurately measuring large surfaces NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable Alumina wear face and tungsten carbide tip for long life and continuous accuracy—field replaceable tips NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Rugged, indoor/outdoor instrument - ideal for field or shop use Shock-absorbing protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to PTB included Built-in temperature compensation ensures measurement accuracy Glass Zero Plate and metal check shim included Conforms to national and international standards including ASTM D4417 Method B and SSPC-PA17 Versatile PosiTector body accepts all PosiTector SPG, RTR, 6000, 200, DPM, IRT, SST, SHD, BHI, and UTG probes easily converting from a surface profile gage to a coating thickness gage, dew point meter, soluble salt tester, hardness tester, or ultrasonic wall thickness gage 30º angle interchangeable probe tip available for special surface profile applications Cabled probes available for blasted steel, textured coatings, and concrete profile NEW Auto rotating display with Flip Lock Selectable display languages Mils/Microns switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped Includes PosiSoft Software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector SPG Frequently Asked Questions Downloads DeFelsko Positector SPG Surface Profile Gages - Literatute DeFelsko Positector SPG Surface Profile Gages - Instruction Manual DeFelsko Positector SPG Surface Profile Gages - Certified Literature DeFelsko Positector SPG Surface Profile Gages for Blasted Steel, Textured Coatings and Concrete Profile - Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/defelsko-positector-spg-c-108_115/defelsko-spgcs1-g-positector-spg-cs-standard-surface-profile-gage-for-textured-coatings-p-1722.html Tue, 30 Jul 2024 16:54:50 +0000 USD 1722 DeFelsko 991 SPGCS1 https://www.abqindustrial.net/store/images/defelsko-positector-spg-cs.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitfts3-positector-inspection-kit-with-advanced-gage-body-6000-fts-dpm-and-spg-probes-p-1721.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1721 ]]>DeFelsko KITFTS3 PosiTector Inspection Kit contains: DeFelsko BDYADV-G PosiTector Advanced Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 250,000 data points, USB, WiFi and Bluetooth output DeFelsko PRBFTS-D PosiTector 6000 Coating Thickness Cabled Probe, 0 - 250 mils (0 - 6 mm), Ferrous Metals DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe The DeFelsko KITFTS3 PosiTector Inspection Kit contains a DeFelsko BDYADV-G PosiTector Advanced Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 250,000 data points, USB, WiFi and Bluetooth output and 3 Probes: PosiTector PRBFTS-D coating thickness cabled probe 0 - 250 mils (0 - 6 mm) Ferrous Metals, PosiTector PRBDPM-C environmental dew point meter probe and PosiTector PRBSPG-B surface profile probe. The PosiTector body accepts the PosiTector 6000, DPM, and SPG probes included in the kit easily converting from a coating thickness gauge to a dew point meter or surface profile gauge. Kit Content The DeFelsko KITFTS3 PosiTector Inspection Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G DeFelsko PRBFTS-D PosiTector 6000 Coating ThicknessHigh Range Cabled Probe 6000-FTS, 6000 μm (0 - 250 mils), Ferrous only DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe PRBDPM DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe PRBSPG Precision plastic shims, glass zero plate and metal shim Protective rubber holster with belt clip, wrist strap Protective lens shield, 3 AAA alkaline batteries PosiSoft Software and USB cable 3 Long Form Certificates of Calibration traceable to NIST Convenient hard shell case and 3 instruction manuals Two (2) year warranty on gauge body and probes PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector Inspection KitFrequently Asked Questions Related Products DeFelsko Positector DPM Environment Meter / Dew Point Meter DeFelsko Positector SPG Surface Profile Gauge DeFelsko PosiTector 6000 Coating Thickness Gauge For general purpose paint and coating applications. Downloads DeFelskoPosiTector Inspection Kit - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitfts3-positector-inspection-kit-with-advanced-gage-body-6000-fts-dpm-and-spg-probes-p-1721.html Wed, 13 Dec 2023 19:23:47 +0000 USD 1721 DeFelsko 985 DeFelsko-KITFTS3 https://www.abqindustrial.net/store/images/defelsko-kitfts3-positector-inspection-kit.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitfts1-positector-inspection-kit-with-standard-gage-body-6000-fts-dpm-and-spg-probes-p-1720.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1720 ]]>DeFelsko KITFTS1 PosiTector Inspection Kit contains: DeFelsko BDYSTD-G PosiTector Standard Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 1000 data points and USB data output DeFelsko PRBFTS-D PosiTector 6000 Coating Thickness Cabled Probe, 0 - 250 mils (0 - 6 mm), Ferrous Metals DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe The DeFelsko KITFTS1 PosiTector Inspection Kit contains a DeFelsko BDYSTD-G PosiTector Standard Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 1000 data points, USB data output and 3 Probes: PosiTector PRBFTS-D coating thickness cabled probe 0 - 250 mils (0 - 6 mm), Ferrous Metals, PosiTector PRBDPM-C environmental dew point meter probe and PosiTector PRBSPG-B surface profile probe. The PosiTector body accepts the PosiTector 6000, DPM, and SPG probes included in the kit easily converting from a coating thickness gauge to a dew point meter or surface profile gauge. Kit Content The DeFelsko KITFTS1 PosiTector Inspection Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G DeFelsko PRBFTS-D PosiTector 6000 Coating ThicknessHigh Range Cabled Probe 6000-FTS, 6000 μm (0 - 250 mils), Ferrous only DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe PRBDPM DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe PRBSPG Precision plastic shims, glass zero plate and metal shim Protective rubber holster with belt clip, wrist strap Protective lens shield, 3 AAA alkaline batteries PosiSoft Software and USB cable 3 Long Form Certificates of Calibration traceable to NIST Convenient hard shell case and 3 instruction manuals Two (2) year warranty on gauge body and probes FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector Inspection KitFrequently Asked Questions Related Products DeFelsko Positector DPM Environment Meter / Dew Point Meter DeFelsko Positector SPG Surface Profile Gauge DeFelsko PosiTector 6000 Coating Thickness Gauge For general purpose paint and coating applications. Downloads DeFelskoPosiTector Inspection Kit - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitfts1-positector-inspection-kit-with-standard-gage-body-6000-fts-dpm-and-spg-probes-p-1720.html Wed, 13 Dec 2023 19:23:14 +0000 USD 1720 DeFelsko 954 DeFelsko-KITFTS1 https://www.abqindustrial.net/store/images/defelsko-kitfts1-positector-inspection-kit.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitft3-positector-inspection-kit-with-advanced-gage-body-6000-ft-dpm-and-spg-probes-p-1719.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1719 ]]>DeFelsko KITFT3 PosiTector Inspection Kit contains: DeFelsko BDYADV-G PosiTector Advanced Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 250,000 data points, USB, WiFi and Bluetooth output DeFelsko PRBFT-D PosiTector 6000 Coating Thickness Integral Probe, 0 - 250 mils (0 - 6 mm), Ferrous Metals DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe The DeFelsko KITFT3 PosiTector Inspection Kit contains a DeFelsko BDYADV-G PosiTector Advanced Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 250,000 data points, USB, WiFi and Bluetooth output and 3 Probes: PosiTector PRBFT-D coating thickness integral probe 0 - 250 mils (0 - 6 mm), Ferrous Metals, PosiTector PRBDPM-C environmental dew point meter probe and PosiTector PRBSPG-B surface profile probe. The PosiTector body accepts the PosiTector 6000, DPM, and SPG probes included in the kit easily converting from a coating thickness gauge to a dew point meter or surface profile gauge. Kit Content The DeFelsko KITFT3 PosiTector Inspection Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G DeFelsko PRBFT-D PosiTector 6000 Coating Thickness Integral High Range Probe 6000-FS, 6000 μm (0 - 250 mils), Ferrous only DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe PRBDPM DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe PRBSPG Precision plastic shims, glass zero plate and metal shim Protective rubber holster with belt clip, wrist strap Protective lens shield, 3 AAA alkaline batteries PosiSoft Software and USB cable 3 Long Form Certificates of Calibration traceable to NIST Convenient hard shell case and 3 instruction manuals Two (2) year warranty on gauge body and probes PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector Inspection KitFrequently Asked Questions Related Products DeFelsko Positector DPM Environment Meter / Dew Point Meter DeFelsko Positector SPG Surface Profile Gauge DeFelsko PosiTector 6000 Coating Thickness Gauge For general purpose paint and coating applications. Downloads DeFelskoPosiTector Inspection Kit - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitft3-positector-inspection-kit-with-advanced-gage-body-6000-ft-dpm-and-spg-probes-p-1719.html Wed, 13 Dec 2023 19:21:23 +0000 USD 1719 DeFelsko 979 DeFelsko-KITFT3 https://www.abqindustrial.net/store/images/defelsko-kitft3-positector-inspection-kit.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitft1-positector-inspection-kit-with-standard-gage-body-6000-ft-dpm-and-spg-probes-p-1718.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1718 ]]>DeFelsko KITFT1 PosiTector Inspection Kit contains: DeFelsko BDYSTD-G PosiTector Standard Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 1000 data points and USB data output DeFelsko PRBFT-D PosiTector 6000 Coating Thickness Integral Probe, 0 - 250 mils (0 - 6 mm), Ferrous Metals DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe The DeFelsko KITFT1 PosiTector Inspection Kit contains a DeFelsko BDYSTD-G PosiTector Standard Body with NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, memory for 1000 data points, USB data output and 3 Probes: PosiTector PRBFT-D coating thickness integral probe 0 - 6 mm Ferrous Metals, PosiTector PRBDPM-C environmental dew point meter probe and PosiTector PRBSPG-B surface profile probe The PosiTector body accepts the PosiTector 6000, DPM, and SPG probes included in the kit easily converting from a coating thickness gauge to a dew point meter or surface profile gauge. Kit Content The DeFelsko KITFT1 PosiTector Inspection Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G DeFelsko PRBFT-D PosiTector 6000 Coating Thickness High Integral High Range 6000-FT, 6000 μm (0 - 250 mils), Ferrous only DeFelsko PRBDPM-C PosiTector DPM Environmental Dew Point Meter Probe PRBDPM DeFelsko PRBSPG-B PosiTector SPG Surface Profile Probe PRBSPG Precision plastic shims, glass zero plate and metal shim Protective rubber holster with belt clip, wrist strap Protective lens shield, 3 AAA alkaline batteries PosiSoft Software and USB cable 3 Long Form Certificates of Calibration traceable to NIST Convenient hard shell case and 3 instruction manuals Two (2) year warranty on gauge body and probes FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector Inspection KitFrequently Asked Questions Related Products DeFelsko Positector DPM Environment Meter / Dew Point Meter DeFelsko Positector SPG Surface Profile Gauge DeFelsko PosiTector 6000 Coating Thickness Gauge For general purpose paint and coating applications. Downloads DeFelskoPosiTector Inspection Kit - Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-inspection-kits-c-97_114/defelsko-kitft1-positector-inspection-kit-with-standard-gage-body-6000-ft-dpm-and-spg-probes-p-1718.html Wed, 13 Dec 2023 19:20:45 +0000 USD 1718 DeFelsko 971 DeFelsko-KITFT1 https://www.abqindustrial.net/store/images/defelsko-kitft1-positector-inspection-kit.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-1235-electrode-for-hay-moisture-meter-p-1716.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1716 ]]>Delmhorst 1235 Electrode for Hay Moisture Meter 10” prod used for testing standard bales Attaches directly to the connector on top of the meter Delmhorst 1235 Electrode for Hay Moisture Meter is used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-1235-electrode-for-hay-moisture-meter-p-1716.html Wed, 23 Nov 2022 20:54:14 +0000 USD 1716 Delmhorst 912 1235 https://www.abqindustrial.net/store/images/Delmhorst%201235%20Electrode%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-608-replacement-moisture-pins-p-1715.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1715 ]]>Price: $60.00 to $75.00 Delmhorst 608 Replacement Moisture Pins Description: 21E replacement moisture pins Measurement Type: pin The Delmhorst 608 Replacement Moisture Pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-608-replacement-moisture-pins-p-1715.html Wed, 16 Nov 2022 23:07:13 +0000 USD 1715 Delmhorst 947 608 https://www.abqindustrial.net/store/images/Delmhorst%20608%20Accessories%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-496-replacement-moisture-pins-p-1714.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1714 ]]>Delmhorst 496 Replacement Moisture Pins Product Type: replacement pins, retainers, and sleeves Measurement Type: pin Delmhorst 496 Replacement Moisture Pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-496-replacement-moisture-pins-p-1714.html Wed, 23 Nov 2022 20:54:43 +0000 USD 1714 Delmhorst 972 496 https://www.abqindustrial.net/store/images/Delmhorst%20496%20Accessories%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-26-es-2-pin-electrode-p-1713.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1713 ]]>Delmhorst 26-ES 2-Pin Electrode The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern The 496 contact pins that come with the Delmhorst 26-ES 2-Pin Electrode penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications. Applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen:Easily check high density hardwood that short pins are unable to penetrate. Also available as the 26-ED, which includes gauge to measure pin penetration depth Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-26-es-2-pin-electrode-p-1713.html Wed, 23 Nov 2022 20:55:12 +0000 USD 1713 Delmhorst 967 26-ES https://www.abqindustrial.net/store/images/Delmhorst%2026-ES%20Electrode%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-ht-3000-thermo-hygrometer-p-1712.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1712 ]]>Delmhorst HT-3000 Thermo-Hygrometer Bright, clear digital display. Fast response time. Relative Humidity Range: 0%-100%. The Delmhorst HT-3000 thermo-hygrometer moisture meter is a great tool for monitoring the level of humidity in flooring installations, building inspections, restoration jobs, and even agriculture operations. With a simple interface, fast acclimation, and useful statistics like dewpoint and grains per pound, the Delmhorst HT-3000 moisture meter is a great value at an economical price. Use the HT-3000 in conjunction with one of our moisture meters for a thorough assessment of every job. Kit Contents Delmhorst HT-3000 Thermo-Hygrometer Instructions Features Bright, clear digital display. Fast response time. Relative Humidity Range: 0%-100%. Temperature Range: -4°F - 158°F (-20°C - 70°C). Dew Point Range: -40°F - 158°F (-40°C - 70°C). GPP Range: 1 GPP – 2000 GPP (.1 GPK – 285 GPK). Automatic power down. Reading HOLD feature. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Downloads Delmhorst HT-3000 Thermo-Hygrometer - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact.   WOODWORKING, INDUSTRIAL & MILL: Why should i use a moisture meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Delmhorst customers in the woodworking/lumber industry know that moisture content is the single most important factor affecting the quality of their products. To ensure quality, from the mill and dry kiln to the finishing floor, Delmhorst moisture meters help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade lumber cannot make a difference if moisture content goes unchecked. Are there different types of moisture meters? There are two types of moisture meters commonly used in lumber and woodworking applications. A pin-type uses two pins that penetrate into wood at the users desired depth. Pin-type meters are the only instruments that indicate the moisture conditions inside a board or a piece of wood. Using insulated pins, only the uncoated tips are exposed to the wood fiber, providing more accurate readings of moisture content at various levels of penetration. Using a pin type meter with insulated pins is still the most effective method to determine moisture gradient, which is the difference between shell and core moisture content. Pinless moisture meters read moisture closest to the source of the magnetic field, in this case, at the surface. For quickly scanning finished product, a pin-less meter is a convenient way to identify a problem area. However, a pinless meter cannot differentiate between shell and core moisture content and will not detect a moisture gradient. Also, readings provided by a pinless meters are affected by surface moisture. Please refer to the diagram below for a basic look at the difference between readings obtained from a pin-type meter compared to a surface meter. This diagram illustrates that pin-type meters and surface meters provide different information about the moisture content in a board. Each technology may be appropriate for different applications. Before choosing a meter, it is important to understand these differences in readings and choose the type of meter best suited for your particular application. How does a moisture meter work? Using the principle of electrical resistance, pin-type meters use the board as an element in a circuit by driving two pins or electrodes into it. This method works because moisture conducts electricity well and dry wood is an effective insulator. Most pinless meters use the capacitance method, which uses the relationship between the moisture content and the dielectric properties of the wood. Both the resistance and the dielectric properties of wood change in direct proportion to its moisture content, within a specific range. In what range of moisture content do pin-type meters operate? Resistance-type meters express moisture content as a percentage of the oven-dry weight of the wood. These meters work best from the range of fiber saturation point (25 to 30 percent) down to around 6 percent. Below 6 percent, it's tough to make accurate, repeatable readings because of the high electrical resistance in really dry wood. This is particulary true at low relative humidity levels, generally below 30 percent. Electrical accuracy of all Delmhorst meters is better than 0.5 percent between 6 and 12 percent moisture content; better than 1 percent between 12 and 20 percent moisture content; and better than 2 percent between 20 and 30 percent, or at fiber saturation point. You can check accuracy either through the internal check or with a Moisture Content Standard. At what moisture content level do i minimize defects? Acceptable moisture content depends on the final use of the wood. Wood for fine furniture should be dried to 6 to 8 percent in most areas of the country, with very little variation among pieces and between the shell and core. Appropriate moisture content is also climate-driven. To determine the attainable moisture content - or equilibrium moisture content (EMC) - in your part of the country, hang small, thin samples of a wood species in your shop or plant and taking daily readings. When the samples' moisture content remains constant, they have reached the equilibrium level. This level will change from season to season, but you'll know the range within which to work. (Figure III) How do i determine the distribution of moisture in a board? Here's where Delmhorst recommends the use of a pin-type moisture meter. First, to determine how the moisture is moving through a board, make a series of shell readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. The Delmhorst 26-ES electrode with insulated pins is the easiest and surest way to detect a moisture gradient. Since the 26-E pinpoints are not insulated, two or three quick readings at different levels of penetration will indicate if the board is well seasoned, or properly dried. A normal gradient usually develops from the wetter core to the drier surface, with an average reading at between 1/4 to 1/5 of the board thickness. Even non-insulated pins, which measure the wettest fibers, will provide a good indication of how the wood is drying. If you are using non-insulated pins, push the pins just about 1/16" into the surface, read the meter, and then push the pins to their full depth. For kiln-dried stock, the final reading should be between 6 and 12 percent; with your first reading about 1 percent lower. For air-dried stock, the final reading is typically between 12 and 19 percent, with the first reading between 2 and 3 percent lower. Meter readings outside of these ranges indicate that the board is poorly seasoned. Pin-less meters scan through the cross section of a board taking into account the moisture in the entire penetrated area. If there is a high concentration of moisture at the surface, the reading will be skewed to reflect this surface moisture. If the surface is dry and core moisture exists, the readings will be lower than the representative moisture levels throughout the board. Does surface moisture skew a delmhorst meter reading? Moisture caused by exposure to rain, fog or high relative humidity is easily and accurately detected with insulated pins. If you're using non-insulated pins, push them 1/16" into the wood and read the meter. Then push them to their full penetration. The meter reading should increase by 1 to 2 points, just because of the greater contact. If there is no increase, or the increase is less than 1 percent, the wood is wet on the surface and the readings are unreliable. As described in the answer to the question above, readings taken with a surface meter are affected by surface moisture, making it difficult to determine if the surface moisture is a result of standing water caused by rain, or if it is representative of the moisture content throughout the board. How many measurements does delmhorst recommend for an accurate sampling? Accuracy of the readings depends on how representative the samples are of the entire load. In an ideal situation, when all the boards in a load have the same moisture content, and the distribution in each board is uniform, only a few readings are needed. But since this ideal condition doesn't often happen, start by checking a large percentage of pieces. If the readings are within close range, it's apparent that the load is fairly uniform. For critical use, check 5 or 10 percent of the load, and be sure to look at boards from all parts of the load. Check slower drying quarter sawn boards as well as flat sawn lumber. If you can only drive pins into the edge, be sure to use the longest pins available to reach the fibers as deep as the board is thick. The Delmhorst RDM series moisture meters with data collection and statistical analysis capabilities are ideal for simplifying the entire sampling procedure and providing backup documentation. How far should i drive non-insulated pins into wood? To full depth if possible. However, at moisture levels below 10%, it is usually sufficient to make good, positive contact with the wood. At higher levels of moisture and especially if you have a steep gradient, full penetration is a must. Otherwise you can have discrepancies between meter readings and actual moisture content of as much as 5 or 6 points, especially in the range above 20 percent. For best results in such cases, use insulated pins. Do i get the same reading if i use 2-pin insulated or 4-pin non-insulated electrodes? The original Delmhorst calibration was developed with a 4-pin electrode - four non-insulated steel needles, with 5/16" penetration - in samples with uniform moisture distribution. For greatest accuracy, a small correction is necessary when using electrodes with two insulated pins. The latest Delmhorst models available are calibrated either for the 2-pin electrode only, or are programmable for both 2-pin and 4-pin electrodes. How does temperature affect the accuracy of meter readings? After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C). In field use, no correction is necessary if the wood temperature is between 50° F and 90° F. If the temperature correction is not built in the meter, use the slide rule or chart we supply with each meter. The temperature of the wood does not affect pin-less type meters, unless the lumber is frozen. Are delmhorst meters accurate on frozen lumber? As long as the wood is not frozen solid and remains conductive, a pin-type meter will give reliable readings. However, most instrumentation, unless specifically designed for extreme weather conditions, will not work well in constant sub-freezing temperatures. How do delmhorst meters correct for species variation? When using a pin-type meter, all species yield different readings at the same moisture content. This is due to the fact that the electrical characteristics of different wood species vary. Delmhorst uses the USDA standard - Douglas Fir - as the basis for all calibrations. When using a Delmhorst meter on other species, either refer to the species correction chart, or key in your species into one of our microprocessor-based meters for an automatic correction. Pinless meters also yield different readings for different species. However, instead of electrical characteristics affecting the readings, wood density affects the readings. Refer to the species correction chart enclosed with your meter to adjust the readings accordingly. Does a group species correction provide an accurate meter reading? Species corrections are most accurate when handled as an individual correction, either through the a species correction chart, or automatically, through software. While not as accurate as individual corrections, the group correction is adequate for practical purposes, as long as the correction is close to the individual factor for the species. What about exotic species or other species not on the charts? If the species correction is simply not available, you can take readings below 10 percent at face value. Any correction is so small that depending on the application; a correction may not be necessary. A good moisture meter is still valuable, even without a correction factor because you can use it to determine the equilibrium moisture content (EMC). A meter reading by itself is not always as important as allowing the wood to attain its EMC level where it won't change dimension, crack, or split. Does the glue used in plywood affect meter accuracy? In most cases, no. To verify this, use insulated pins to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the meter on plywood as you would any solid material and take the readings at face value, without species correction. What about the chemicals in treated lumber? Recent studies have shown that you can use a Delmhorst meter with confidence at the treating plant, job site, or when the wood is in service if the preservative is a "C oxide" formulation (CCA-C) widely used today. Our experience has shown that at higher moisture content levels (above 20 percent), chemically treated lumber tends to yield somewhat erratic readings. What about particleboard and other manufactured materials? Chemical additives may or may not affect meter readings. Use the meter to make qualitative, comparative readings. If greater accuracy is required, Delmhorst can help you to develop a specific calibration. How do delmhorst meters handle readings on rough-surfaced lumber and cupped boards? With a pin-type meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pin-less meters, however, need full exposure to a flat surface so their readings on some uneven surfaces may be unreliable. Are there board width limitations in using moisture meters? Board width is not a limiting factor when using a pin type moisture meter. As long as the pins make good contact, the meter can be used on anything from small dowels to wide planks. For accurate results with a pinless meter, the material you're testing must be at least the width of the scanning area on the bottom of the meter. What happens if i bring a delmhorst meter into a dry kiln? Moisture meters, like most precision instruments, are sensitive to moisture. We do not recommend taking a meter into a kiln, especially from cold surroundings. If you must, take a few minutes to warm up the meter and electrode to a maximum 100°F, so that the higher temperature and moisture levels in the kiln will not affect the meter for a few minutes. If you don't acclimate the meter, readings will be erratic at best. While Delmhorst meters are built for the harsh mill environment, continued exposure to high heat and humidity will invite corrosion and shorten the life of a meter's keypad, display and PC board components. How can i monitor moisture content during drying without going into the kiln? Use the Delmhorst Kil-Mo-Trol, a remote probe system that measures the moisture content of lumber during the drying process. Resistance probes or contact pins are located at various "stations" throughout the lumber packages to monitor shell and core or core only moisture content readings. This technique is proven for both hardwood and softwood drying, and can be used in any type of dry kiln, pre-dryer, or air-drying operation. For more information about Kil-Mo-Trol, please close this window and click on the Kil-Mo-Trol Moisture Monitor button. How does static electricity affect meter readings? In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. Depending on the conditions, any one of them can work, either alone or in combination with another. Why do meter readings not always agree? If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary. Assuming both meters are electrically correct, the difference usually can be attributed to use of different electrodes, pin penetration, and species and temperature corrections. When meters are used for lumber inspections by vendors and buyers, the two parties should have a basis for comparing readings obtained with the instruments they are using. How do i keep a delmhorst meter in good working condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-ht-3000-thermo-hygrometer-p-1712.html Sat, 23 Mar 2024 02:09:34 +0000 USD 1712 Delmhorst 978 HT-3000 https://www.abqindustrial.net/store/images/Delmhorst%20HT-3000%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-woodworking-c-107_138_154/delmhorst-j-lite-pin-type-wood-moisture-meter-p-1711.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1711 ]]>Delmhorst J-Lite Pin-Type Wood Moisture Meter 12 bright LEDs - Great for reading in direct sunlight or dark areas. Moisture Range: 6% - 30%. Built-in calibration check. The Delmhorst J-Lite Pin-Type Wood Moisture Meter is a great all-around tool for any situation! Whether you're experienced or just starting out, you can't go wrong with the Demhorst J-Lite moisture meter! With J-Lite's unique LED display, you'll be in the know no matter where the job takes you. Kit Contents Delmhorst J-Lite Moisture Meter Instructions Features 12 bright LEDs - Great for reading in direct sunlight or dark areas. Moisture Range: 6% - 30%. Built-in calibration check. Integral contact pins mounted on the meter prove 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 3-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4". Great for use on roofs, insulation, or EIFS. 21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration. 22-E is also available as the 22-ET with a tapped handle for hard to reach areas. 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding. 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough Downloads Delmhorst J-Lite Moisture Meter - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-woodworking-c-107_138_154/delmhorst-j-lite-pin-type-wood-moisture-meter-p-1711.html Wed, 16 Nov 2022 22:56:37 +0000 USD 1711 Delmhorst 995 J-Lite https://www.abqindustrial.net/store/images/Delmhorst%20J-Lite%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-gb-1-gypsum-sensor-blocks-for-soil-moisture-meter-p-1710.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1710 ]]>Delmhorst GB-1 Gypsum Sensor Blocks for Soil Moisture Meter The blocks are made of gypsum, cast around two concentric, stainless steel electrodes. The GB-1 measures 7/8” dia. x 1 1/8” in height. The Delmhorst GB-1 Gypsum Sensor Blocks for Soil Moisture Meter are made of gypsum, cast around two concentric, stainless steel electrodes. They are manufactured under controlled conditions to obtain a maximum degree of uniformity and fast response to soil moisture changes. The Delmhorst GB-1 measures 7/8” dia. x 1 1/8” in height. It is the most widely used sensing unit, easy to install and especially suited for extensive sampling of soil at various depths. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-by-manufacturer-c-107_125/delmhorst-moisture-meters-c-107_125_113/delmhorst-gb-1-gypsum-sensor-blocks-for-soil-moisture-meter-p-1710.html Wed, 23 Nov 2022 20:55:43 +0000 USD 1710 Delmhorst 820 GB-1 https://www.abqindustrial.net/store/images/Delmhorst%20GB-1%20Gypsum%20Sensor%20Blocks%20Electrode%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-woodworking-c-107_138_154/delmhorst-j-4-analog-pin-type-wood-moisture-meter-p-1709.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1709 ]]>Delmhorst J-4 Analog Pin-Type Wood Moisture Meter Easy-to-read analog display. Moisture Range: 6%-30% on wood. Built-in calibration check. The Delmhorst J-4 Analog Pin-Type Wood Moisture Meter is a user-friendly meter that you’ll pick up with ease, but never want to put down! The Delmhorst J-4 Wood Moisture Meter is a tried and true solution for installers, woodworkers, and small shops. Kit Contents Delmhorst J-4W/CS Analog Pin-Type Wood Moisture Meter Delmhorst J-4 Analog Wood Moisture Meter Extra Contact Pins for the Meter Carrying Case Instructions Delmhorst J-4/PKG Analog Pin-Type Wood Moisture Meter Package Delmhorst J-4 Analog Wood Moisture Meter 26-ES Electrode Extra Contact Pins for the Meter 496 Pins for the 26-ES Electrode Carrying Case Instructions Features Easy-to-read analog display. Moisture Range: 6%-30% on wood. Built-in calibration check. Integral contact pins mounted on the meter prove 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certification traceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth Downloads Delmhorst J-4 Moisture Meter - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-flooring-wood-products-c-107_138/moisture-meters-for-woodworking-c-107_138_154/delmhorst-j-4-analog-pin-type-wood-moisture-meter-p-1709.html Wed, 16 Nov 2022 22:55:52 +0000 USD 1709 Delmhorst 985 J-4 https://www.abqindustrial.net/store/images/Delmhorst%20J-4%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-2000-digital-moisture-meter-for-hay-p-1708.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1708 ]]>Delmhorst FX-2000 Digital Moisture Meter for Hay Bright, clear digital display. Can be used for on-the-go moisture monitoring or as a portable meter. Moisture Range: 6%-40% on hay. The Delmhorst FX-2000 Digital Moisture Meter is ideal for high-volume producers who need the time-saving convenience of on-the-go monitoring. Whether in the windrow, on-the-go while baling, or in the bale, the Delmhorst FX-2000 moisture meter gives clear, accurate moisture readings every step of the way! Kit Contents Delmhorst FX-2000W/PS Digital Moisture Meter for Hay Delmhorst FX-2000 Digital Moisture Meter for Hay Power Supply Instructions Delmhorst FX-2000/1986 Digital Moisture Meter for Hay, Value Package Delmhorst FX-2000 Digital Moisture Meter for Hay 1986 Bale Sensor with Cable and Mounting Bracket Power Supply Instructions Delmhorst FX-2000/PKG Digital Moisture Meter for Hay, Deluxe Package Delmhorst FX-2000 Digital Moisture Meter for Hay 1986 Bale Sensor with Cable and Mounting Bracket H-4 Handle - Electrode handle 830-3 10” Probe for testing standard and high density bales 831 Windrow Probe Power Supply Carrying Case Instructions Delmhorst FX-2000/18/PKG Digital Moisture Meter for Hay, Deluxe 18” Package Delmhorst FX-2000 Digital Moisture Meter for Hay 1986 Bale Sensor with Cable and Mounting Bracket H-4 Handle - Electrode handle 830-3 18” Probe for testing standard and high density bales 831 Windrow Probe Power Supply Carrying Case Instructions Features Bright, clear digital display. Can be used for on-the-go moisture monitoring or as a portable meter. In continuous mode: Takes two readings every second. Displays the average and highest of eight accumulated readings. Readings updated every 4 seconds. Built-in back light. Connects to tractor power supply. In portable mode: Averages up to 100 accumulated readings. Displays average and highest of accumulated readings. Moisture Range: 6%-40% on hay. Built-in calibration check. Audible, adjustable alarm alerts you when a pre-selected MC has been reached. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 3-year warranty Accessories 1985 The 1985 is a replacement 30ft coaxial cable for the 1986 bale chamber sensor. Also available in 36ft and 40ft lengths as 1985/36 and 1985/40 respectively. 1986/EXTENSION Extends mounting bolts used when installing 1986 bale chamber sensor. Used for newer balers with thick chamber walls. 315ACC-0003 This kit includes the power supply cable and mounting hardware necessary to install the FX-2000 in your tractor cab. 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. MCS-4 This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. 1986 Bale Sensor For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000. Also available as 1986/40 with 40’ cable for larger balers. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod. 830-3 – 18” prod. 830-4 – 36” prod. 830-5 – 12” for hops. 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing. 2110 Split bale chamber sensor for use with Freeman balers Downloads Delmhorst FX-2000 Moisture Meter for Hay - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-fx-2000-digital-moisture-meter-for-hay-p-1708.html Fri, 12 Apr 2024 17:16:28 +0000 USD 1708 Delmhorst 944 FX-2000 https://www.abqindustrial.net/store/images/Delmhorst%20FX-2000%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/delmhorst-j-2000-digital-pin-type-wood-moisture-meter-p-1707.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1707 ]]>Delmhorst J-2000 Digital Pin-Type Wood Moisture Meter Bright, clear digital display. Corrects for 50 individual wood species and temperature (°F and °C). Averages up to 100 accumulated readings. For flooring contractors, woodworkers, furniture manufacturers, QC inspectors and small mills, the Delmhorst J-2000 Digital Pin-Type Wood Moisture Testerhelps to keep up with ever-changing job conditions. With built-in wood species correction and temperature correction, along with storage and informative reading statistics the Delmhorst J-2000 wood moisture meter is an extremely versatile tool at a great value. Kit Contents Delmhorst J-2000W/CS Digital Pin-Type Wood Moisture Meter Delmhorst J-2000 Digital Pin-Type Wood Moisture Meter Carrying Case Instructions Delmhorst J-2000/PKG Digital Pin-Type Wood Moisture Meter, Deluxe Package Delmhorst J-2000 Digital Pin-Type Wood Moisture Meter 26-ES Electrode Carrying Case Instructions Features Bright, clear digital display. Corrects for 50 individual wood species and temperature (°F and °C). Averages up to 100 accumulated readings. Moisture Range: 6%-40% on wood. Also available with 6%-60% MC range as J-2000/X. Built-in calibration check. Integral contact pins mounted on top of meter provide 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. Used for veneer. 18-ES Similar to 26-ES, the 18-ES has a 17" steel shaft. Comes with 608 insulated pins for 3 1/4" penetration. Ideal for timber, poles, and ties. Also offered - 18-ED - with depth gauge to measure pin penetration. 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration. 22-E is also available as the 22- ET with a tapped handle for hard to reach areas. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 42-E/B T-handle electrode with 3/8" penetration and 3 ft. length to check moisture in stacks in or out of the kiln. Stickers must be at least 5/8". Also offered in a 4 1/2 ft. length as 42-EB/4-5 4-E Comes with 4 uninsulated 2497/A-100 contact pins for 5/16" penetration. Useful for: Dry-kiln operators: Use on kiln-dried boards up to 2" and on air-dried boards up to 5/4. Leather producers: Use for tough leather Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. Downloads Delmhorst J-2000 Moisture Meter - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-wood-c-107_137_124/delmhorst-j-2000-digital-pin-type-wood-moisture-meter-p-1707.html Sat, 04 May 2024 21:30:52 +0000 USD 1707 Delmhorst 905 J-2000 https://www.abqindustrial.net/store/images/Delmhorst%20J-2000%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-ht-4000f-thermo-hygrometer-p-1706.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1706 ]]>Delmhorst HT-4000F Thermo-Hygrometer Bright, clear digital display. Relative Humidity Range: 0% - 100%, sensor can be used for in-situ concrete testing following the ASTM F2170 standard Temperature Range: -40°F - 255°F (-40°C - 124°C). The Delmhorst HT-4000F moisture meter is a stand-alone thermo-hygrometer for flooring installers and inspectors. The meter’s detachable sensor makes the Delmhorst HT-4000F moisture meter ideal for testing a concrete slab according to the ASTM F2170 standard. It has the same fast acclimating RH/T sensor found in our popular TotalCheck 3-in-1 moisture meter. For flooring contractors who prefer having separate meters to one combination meter, the HT-4000F is the perfect solution Kit Contents Delmhorst HT-4000F Thermo-Hygrometer RH/T-S3 Sensors - Detachable relative humidity/temperature sensor RH/T-C1 Cable for Easy Reading While Sensor is in Concrete CS-3 Concrete Sleeves for Testing in Multiple sites (10 - ten) Carrying Case Instructions Features Bright, clear digital display. Relative Humidity Range: 0% - 100%, sensor can be used for in-situ concrete testing following the ASTM F2170 standard Temperature Range: -40°F - 255°F (-40°C - 124°C). Dew Point Range: -40°F - 176°F (-40°C - 80°C). GPP Range: 0.1 - 3820 GPP (Grains Per Pound). GPK Range: 0.01 - 545 GPK (Grains Per Kilogram). Vapor Pressure Range: 0 - 7 PSI (Pounds Per Square Inch). Vapor Pressure Range: 0 - 47 KPA (Kilopascals). Built-in back-light makes reading in dark places a cinch. Auto shut-off timer saves battery life. Reading HOLD Feature. Size: 8 ½” x 3 3/8” x 1 ¾”. Weight: 11 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories CS-3 Plastic sleeve required when performing ASTM F-2170 tests on concrete. Used with the RH/T-S3 attachment included with Total Check and HT-4000F. Order in packs of 20 CS-3/20 Relative Humidity Test Kit The relative humidity test kit is great for testing the accuracy of our detachable RH/T-S1 and RH/T-S3 relative humidity sensors. The air inside the test kit bottle is controlled by a salt solution, which keeps the relative humidity constant. The kit is available with either 33% or 75% relative humidity (Order asRH/TK/33 and RH/TK/75 respectively). RH/T-C1 Extension cable that connects to the RH/T-S3, allowing you to easily view your meter’s screen while performing ASTM F-2170 tests on concrete. RH/T-S3 Detachable relative humidity/temperature sensor that is included with Total Check and HT-4000F. Can be used to obtain ambient RH/T readings, or for performing ASTM F-2170 tests on concrete. Order individually or in packs of 5 as RH/T-S3/5. Downloads Delmhorst HT-4000F Thermo-Hygrometer - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact.   WOODWORKING, INDUSTRIAL & MILL: Why should i use a moisture meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Delmhorst customers in the woodworking/lumber industry know that moisture content is the single most important factor affecting the quality of their products. To ensure quality, from the mill and dry kiln to the finishing floor, Delmhorst moisture meters help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade lumber cannot make a difference if moisture content goes unchecked. Are there different types of moisture meters? There are two types of moisture meters commonly used in lumber and woodworking applications. A pin-type uses two pins that penetrate into wood at the users desired depth. Pin-type meters are the only instruments that indicate the moisture conditions inside a board or a piece of wood. Using insulated pins, only the uncoated tips are exposed to the wood fiber, providing more accurate readings of moisture content at various levels of penetration. Using a pin type meter with insulated pins is still the most effective method to determine moisture gradient, which is the difference between shell and core moisture content. Pinless moisture meters read moisture closest to the source of the magnetic field, in this case, at the surface. For quickly scanning finished product, a pin-less meter is a convenient way to identify a problem area. However, a pinless meter cannot differentiate between shell and core moisture content and will not detect a moisture gradient. Also, readings provided by a pinless meters are affected by surface moisture. Please refer to the diagram below for a basic look at the difference between readings obtained from a pin-type meter compared to a surface meter. This diagram illustrates that pin-type meters and surface meters provide different information about the moisture content in a board. Each technology may be appropriate for different applications. Before choosing a meter, it is important to understand these differences in readings and choose the type of meter best suited for your particular application. How does a moisture meter work? Using the principle of electrical resistance, pin-type meters use the board as an element in a circuit by driving two pins or electrodes into it. This method works because moisture conducts electricity well and dry wood is an effective insulator. Most pinless meters use the capacitance method, which uses the relationship between the moisture content and the dielectric properties of the wood. Both the resistance and the dielectric properties of wood change in direct proportion to its moisture content, within a specific range. In what range of moisture content do pin-type meters operate? Resistance-type meters express moisture content as a percentage of the oven-dry weight of the wood. These meters work best from the range of fiber saturation point (25 to 30 percent) down to around 6 percent. Below 6 percent, it's tough to make accurate, repeatable readings because of the high electrical resistance in really dry wood. This is particulary true at low relative humidity levels, generally below 30 percent. Electrical accuracy of all Delmhorst meters is better than 0.5 percent between 6 and 12 percent moisture content; better than 1 percent between 12 and 20 percent moisture content; and better than 2 percent between 20 and 30 percent, or at fiber saturation point. You can check accuracy either through the internal check or with a Moisture Content Standard. At what moisture content level do i minimize defects? Acceptable moisture content depends on the final use of the wood. Wood for fine furniture should be dried to 6 to 8 percent in most areas of the country, with very little variation among pieces and between the shell and core. Appropriate moisture content is also climate-driven. To determine the attainable moisture content - or equilibrium moisture content (EMC) - in your part of the country, hang small, thin samples of a wood species in your shop or plant and taking daily readings. When the samples' moisture content remains constant, they have reached the equilibrium level. This level will change from season to season, but you'll know the range within which to work. (Figure III) How do i determine the distribution of moisture in a board? Here's where Delmhorst recommends the use of a pin-type moisture meter. First, to determine how the moisture is moving through a board, make a series of shell readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. The Delmhorst 26-ES electrode with insulated pins is the easiest and surest way to detect a moisture gradient. Since the 26-E pinpoints are not insulated, two or three quick readings at different levels of penetration will indicate if the board is well seasoned, or properly dried. A normal gradient usually develops from the wetter core to the drier surface, with an average reading at between 1/4 to 1/5 of the board thickness. Even non-insulated pins, which measure the wettest fibers, will provide a good indication of how the wood is drying. If you are using non-insulated pins, push the pins just about 1/16" into the surface, read the meter, and then push the pins to their full depth. For kiln-dried stock, the final reading should be between 6 and 12 percent; with your first reading about 1 percent lower. For air-dried stock, the final reading is typically between 12 and 19 percent, with the first reading between 2 and 3 percent lower. Meter readings outside of these ranges indicate that the board is poorly seasoned. Pin-less meters scan through the cross section of a board taking into account the moisture in the entire penetrated area. If there is a high concentration of moisture at the surface, the reading will be skewed to reflect this surface moisture. If the surface is dry and core moisture exists, the readings will be lower than the representative moisture levels throughout the board. Does surface moisture skew a delmhorst meter reading? Moisture caused by exposure to rain, fog or high relative humidity is easily and accurately detected with insulated pins. If you're using non-insulated pins, push them 1/16" into the wood and read the meter. Then push them to their full penetration. The meter reading should increase by 1 to 2 points, just because of the greater contact. If there is no increase, or the increase is less than 1 percent, the wood is wet on the surface and the readings are unreliable. As described in the answer to the question above, readings taken with a surface meter are affected by surface moisture, making it difficult to determine if the surface moisture is a result of standing water caused by rain, or if it is representative of the moisture content throughout the board. How many measurements does delmhorst recommend for an accurate sampling? Accuracy of the readings depends on how representative the samples are of the entire load. In an ideal situation, when all the boards in a load have the same moisture content, and the distribution in each board is uniform, only a few readings are needed. But since this ideal condition doesn't often happen, start by checking a large percentage of pieces. If the readings are within close range, it's apparent that the load is fairly uniform. For critical use, check 5 or 10 percent of the load, and be sure to look at boards from all parts of the load. Check slower drying quarter sawn boards as well as flat sawn lumber. If you can only drive pins into the edge, be sure to use the longest pins available to reach the fibers as deep as the board is thick. The Delmhorst RDM series moisture meters with data collection and statistical analysis capabilities are ideal for simplifying the entire sampling procedure and providing backup documentation. How far should i drive non-insulated pins into wood? To full depth if possible. However, at moisture levels below 10%, it is usually sufficient to make good, positive contact with the wood. At higher levels of moisture and especially if you have a steep gradient, full penetration is a must. Otherwise you can have discrepancies between meter readings and actual moisture content of as much as 5 or 6 points, especially in the range above 20 percent. For best results in such cases, use insulated pins. Do i get the same reading if i use 2-pin insulated or 4-pin non-insulated electrodes? The original Delmhorst calibration was developed with a 4-pin electrode - four non-insulated steel needles, with 5/16" penetration - in samples with uniform moisture distribution. For greatest accuracy, a small correction is necessary when using electrodes with two insulated pins. The latest Delmhorst models available are calibrated either for the 2-pin electrode only, or are programmable for both 2-pin and 4-pin electrodes. How does temperature affect the accuracy of meter readings? After moisture content and a moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated moisture content rises. The lower the temperature, the lower the indicated moisture content. Depending on the temperature and moisture content, you may have to make a correction. Delmhorst meters are calibrated at 70° F (20° C). In field use, no correction is necessary if the wood temperature is between 50° F and 90° F. If the temperature correction is not built in the meter, use the slide rule or chart we supply with each meter. The temperature of the wood does not affect pin-less type meters, unless the lumber is frozen. Are delmhorst meters accurate on frozen lumber? As long as the wood is not frozen solid and remains conductive, a pin-type meter will give reliable readings. However, most instrumentation, unless specifically designed for extreme weather conditions, will not work well in constant sub-freezing temperatures. How do delmhorst meters correct for species variation? When using a pin-type meter, all species yield different readings at the same moisture content. This is due to the fact that the electrical characteristics of different wood species vary. Delmhorst uses the USDA standard - Douglas Fir - as the basis for all calibrations. When using a Delmhorst meter on other species, either refer to the species correction chart, or key in your species into one of our microprocessor-based meters for an automatic correction. Pinless meters also yield different readings for different species. However, instead of electrical characteristics affecting the readings, wood density affects the readings. Refer to the species correction chart enclosed with your meter to adjust the readings accordingly. Does a group species correction provide an accurate meter reading? Species corrections are most accurate when handled as an individual correction, either through the a species correction chart, or automatically, through software. While not as accurate as individual corrections, the group correction is adequate for practical purposes, as long as the correction is close to the individual factor for the species. What about exotic species or other species not on the charts? If the species correction is simply not available, you can take readings below 10 percent at face value. Any correction is so small that depending on the application; a correction may not be necessary. A good moisture meter is still valuable, even without a correction factor because you can use it to determine the equilibrium moisture content (EMC). A meter reading by itself is not always as important as allowing the wood to attain its EMC level where it won't change dimension, crack, or split. Does the glue used in plywood affect meter accuracy? In most cases, no. To verify this, use insulated pins to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the meter on plywood as you would any solid material and take the readings at face value, without species correction. What about the chemicals in treated lumber? Recent studies have shown that you can use a Delmhorst meter with confidence at the treating plant, job site, or when the wood is in service if the preservative is a "C oxide" formulation (CCA-C) widely used today. Our experience has shown that at higher moisture content levels (above 20 percent), chemically treated lumber tends to yield somewhat erratic readings. What about particleboard and other manufactured materials? Chemical additives may or may not affect meter readings. Use the meter to make qualitative, comparative readings. If greater accuracy is required, Delmhorst can help you to develop a specific calibration. How do delmhorst meters handle readings on rough-surfaced lumber and cupped boards? With a pin-type meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pin-less meters, however, need full exposure to a flat surface so their readings on some uneven surfaces may be unreliable. Are there board width limitations in using moisture meters? Board width is not a limiting factor when using a pin type moisture meter. As long as the pins make good contact, the meter can be used on anything from small dowels to wide planks. For accurate results with a pinless meter, the material you're testing must be at least the width of the scanning area on the bottom of the meter. What happens if i bring a delmhorst meter into a dry kiln? Moisture meters, like most precision instruments, are sensitive to moisture. We do not recommend taking a meter into a kiln, especially from cold surroundings. If you must, take a few minutes to warm up the meter and electrode to a maximum 100°F, so that the higher temperature and moisture levels in the kiln will not affect the meter for a few minutes. If you don't acclimate the meter, readings will be erratic at best. While Delmhorst meters are built for the harsh mill environment, continued exposure to high heat and humidity will invite corrosion and shorten the life of a meter's keypad, display and PC board components. How can i monitor moisture content during drying without going into the kiln? Use the Delmhorst Kil-Mo-Trol, a remote probe system that measures the moisture content of lumber during the drying process. Resistance probes or contact pins are located at various "stations" throughout the lumber packages to monitor shell and core or core only moisture content readings. This technique is proven for both hardwood and softwood drying, and can be used in any type of dry kiln, pre-dryer, or air-drying operation. For more information about Kil-Mo-Trol, please close this window and click on the Kil-Mo-Trol Moisture Monitor button. How does static electricity affect meter readings? In cold and/or dry climates, static charges may cause erratic meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the meter turned off, and then turn the meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. Depending on the conditions, any one of them can work, either alone or in combination with another. Why do meter readings not always agree? If two meters are not of the same manufacturer, readings will likely not correspond, because of the different calibrations used. Made in the USA, Delmhorst meters are calibrated on the USDA standard, while foreign made meters use other standards and often have different species and temperature correction factors. Even readings on two meters of the same manufacturer may vary. Assuming both meters are electrically correct, the difference usually can be attributed to use of different electrodes, pin penetration, and species and temperature corrections. When meters are used for lumber inspections by vendors and buyers, the two parties should have a basis for comparing readings obtained with the instruments they are using. How do i keep a delmhorst meter in good working condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-ht-4000f-thermo-hygrometer-p-1706.html Wed, 16 Nov 2022 22:51:25 +0000 USD 1706 Delmhorst 995 HT-4000F https://www.abqindustrial.net/store/images/Delmhorst%20HT-4000F%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-f-6-6-30-analog-moisture-meter-for-hay-p-1705.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1705 ]]>Delmhorst F-6/6-30 Analog Moisture Meter for Hay Easy-to-read analog display. Moisture Range: 6%-30% on hay. Also available with 13%-40% MC range as F-6. With simplified controls, the Delmhorst F-6/6-30 Analog Moisture Meter for Hay is a great entry-level meter for value-minded hay producers. The Delmhorst F-6/6-30 moisture meter is also a favorite among those serving the export markets that require lower MC range readings. Kit Contents Delmhorst F-6/6-30 Analog Moisture Meter for Hay Delmhorst F-6/6-30 Analog Moisture Meter for Hay Instructions Delmhorst F-6/6-30/1235 Analog Moisture Meter for Hay, 10-inch Value Package Delmhorst F-6/6-30 Analog Moisture Meter for Hay 1235 10” Probe for testing standard bales Instructions Delmhorst F-6/6-30/1235/18 Analog Moisture Meter for Hay, 18-inch Value Package Delmhorst F-6/6-30 Analog Moisture Meter for Hay 1235 18” Probe for testing Instructions Delmhorst F-6/6-30/PKG Analog Moisture Meter for Hay, Deluxe 10-inch Package Delmhorst F-6/6-30 Analog Moisture Meter for Hay H-4 Handle - Electrode handle 830-2 10” Probe - for testing standard and high density bales 831 Windrow Probe Carrying Case Instructions Delmhorst F-6/6-30/18/PKG Analog Moisture Meter for Hay, Deluxe 18-inch Package Delmhorst F-6/6-30 Analog Moisture Meter for Hay H-4 Handle - Electrode handle 830-3 18” Probe - for testing standard and high density bales 831 Short Pin Prod Carrying Case Instructions Features Easy-to-read analog display. Moisture Range: 6%-30% on hay. Also available with 13%-40% MC range as F-6. Built-in calibration check. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 1-year warranty Accessories 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. MCS-4 This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the metercasing. Downloads Delmhorst F-6/6-30 Moisture Meter for Hay - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-f-6-6-30-analog-moisture-meter-for-hay-p-1705.html Wed, 10 Apr 2024 11:59:17 +0000 USD 1705 Delmhorst 844 F-6/6-30 https://www.abqindustrial.net/store/images/Delmhorst%20F-6-6-30%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-f-2000-digital-moisture-meter-for-hay-p-1704.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1704 ]]>Delmhorst F-2000 Digital Moisture Meter for Hay Bright, clear digital display. Averages up to 100 accumulated readings. Displays average and highest of accumulated readings. The Delmhorst F-2000 Digital Moisture Meter for Hay is great for hay producers looking to enhance quality control. The Delmhorst F-2000 moisture meter checks hay moisture in the windrow or in bales, and comes with the same accuracy and clarity as the FX-2000! Kit Contents Delmhorst F-2000 Digital Moisture Meter for Hay, Individual Instrument Delmhorst F-2000 Moisture Meter for Hay Instructions Delmhorst F-2000/1235 Digital Moisture Meter for Hay, Value 10" Package (Sword Type) Delmhorst F-2000 Moisture Meter for Hay Instructions 1235/10 Probe 10" Delmhorst F-2000/1235/18 Digital Moisture Meter for Hay, Value 18" Package (Sword Type) Delmhorst F-2000 Moisture Meter for Hay Instructions 1235/18 Probe 18" Delmhorst F-2000/PKG Digital Moisture Meter for Hay, Deluxe Package Delmhorst F-2000 Moisture Meter for Hay Carrying case H-4 Handle 830-2 10” 831 Short Pin Prod Instructions Delmhorst F-2000/18/PKG Digital Moisture Meter for Hay, Deluxe 18” Package Delmhorst F-2000 Moisture Meter for Hay Carrying case H-4 Handle 830-3 - 18” 831 Short Pin Prod Instructions Features Bright, clear digital display. Averages up to 100 accumulated readings. Displays average and highest of accumulated readings. Moisture Range: 6%-40%.on hay. Built-in calibration check. Audible, adjustable alarm alerts you when a pre-selected MC has been reached. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Optional sturdy plastic carrying case. 9V battery. 3-year warranty Accessories 324CAS-0065 Carrying Case This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately. MCS-4 This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (16% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-4 is also available with a letter of certification traceable to NIST Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 1235 10” prod used for testing standard bales. Attaches directly to the connector on top of the meter. Also available in 18” length as 1235/18. 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops 831 Short Pin Prod For testing hay in the windrow (requires H-4 Handle). H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the metercasing. Downloads Delmhorst F-2000 Moisture Meter for Hay - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-agriculture-c-107_135/moisture-meters-for-hay-c-107_135_136/delmhorst-f-2000-digital-moisture-meter-for-hay-p-1704.html Fri, 21 Jun 2024 16:57:45 +0000 USD 1704 Delmhorst 645 F-2000 https://www.abqindustrial.net/store/images/Delmhorst%20F-2000%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bd-10-analog-pin-type-moisture-meter-for-building-inspection-p-1703.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1703 ]]>Delmhorst BD-10 Analog Pin-Type Moisture Meter for Building Inspection Easy-to-read analog display. Built-in calibration check. Integral contact pins mounted on top of meter provide 5/16” penetration. Easy to operate and easy to read, the Delmhorst BD-10 analog pin-type moisture meter measures moisture in wood and other non-wood building materials. For those who prefer an analog display, the Demhorst BD-10 moisture meter is a great alternative to the digital BD-2100. The Delmhorst BD-10 is a great entry level meter, and is ready to go with a single button press! Kit Contents Delmhorst BD-10W/CS Analog Pin-Type Moisture Meter for Building Inspection, Individual Instrument Delmhorst BD-10 Carrying case Extra contact pins for the meter Instructions Manual Delmhorst BD-10/PKG Analog Pin-Type Moisture Meter for Building Inspection, Standard Package Delmhorst BD-10 Carrying case Extra contact pins for the meter 21-E Electrode Instructions Manual Delmhorst BD-10/26/PKG Analog Pin-Type Moisture Meter for Building Inspection, Flooring Package Delmhorst BD-10 Carrying case Extra contact pins for the meter 26-ES Electrode 496 contact pins for the 26-ES eletrode Instructions Manual Delmhorst BD-10/EIFS/PKG Analog Pin-Type Moisture Meter for Building Inspection, EIFS Package Delmhorst BD-10 Carrying case Extra contact pins for the meter 608/001 Contact Pins - 2 (two) 21-E Electrode HP-1 Hole Punch Instructions Manual Delmhorst BD-10/26/21/PKG Analog Pin-Type Moisture Meter for Building Inspection, 26/21 Package Delmhorst BD-10 Carrying case Extra contact pins for the meter 26-ES Electrode 21-E Electrode 496 pins for the 26-ES electrode Instructions Manual Features Easy-to-read analog display. Two scales: Wood Scale - 6% - 40% moisture range. Use for flooring and building material such as wood studs, floor joists, subfloors. Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials such as concrete, plaster, and insulation. Built-in calibration check. Integral contact pins mounted on top of meter provide 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4". Great for use on roofs, insulation, or EIFS. 21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration. 22-E is also available as the 22-ET with a tapped handle for hard to reach areas. 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding. 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst BD-10 Moisture Meter for Building Inspection - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bd-10-analog-pin-type-moisture-meter-for-building-inspection-p-1703.html Wed, 16 Nov 2022 22:44:21 +0000 USD 1703 Delmhorst 966 BD-10 https://www.abqindustrial.net/store/images/Delmhorst%20BD-10%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-totalcheck-3-in-1-moisture-meter-for-building-inspection-p-1702.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1702 ]]>Delmhorst TotalCheck 3-in-1 Moisture Meter for Building Inspection Bright, clear digital display Scan Mode: 0–300 numerical reference scale Store up to 1400 readings with date and time stamp Delmhorst’s TotalCheck 3-in-1 moisture meter measures moisture by pin and scan modes, and is fast acting, accurate, thermo-hygrometer. The removable RH sensor measures ambient temperature and RH, and calculate dew point and GPP. High levels of ambient humidity can be a warning sign at inspection jobs. RH is also a major concern when testing a concrete sub-floor. To address this concern, Delmhorst TotalCheck moisture meter is designed to conform to the ASTM F-2170 standard to determine RH in a concrete slab using in-situ probes. Using TotalCheck to follow the ASTM F-2170 will provide useful information to minimize moisture-related flooring problemsand failures Kit Contents Delmhorst TCHECK/CP TotalCheck Concrete Package 3-in-1 Moisture Meter for Building Inspection Delmhorst TotalCheck 3-in-1 Moisture Meter for Building Inspection RHT-S3 Humidity Sensor 26-ES Electrode RH/T-C1 Cable 496 Pins (10 ten) CS-3 Sleeves (10 ten) Carrying Case Instructions Delmhorst TCHECK/S1/WD/PKG TotalCheck Wood Package 3-in-1 Moisture Meter for Building Inspection Delmhorst TotalCheck 3-in-1 Moisture Meter for Building Inspection RHT-S1 Humidity Sensor 26-ES Electrode 2-E Electrode 496 Pins (10 ten) MCS-1 Moisture Content Standard Carrying Case Instructions Delmhorst TCHECK/FP TotalCheck Flooring Package 3-in-1 Moisture Meter for Building Inspection Delmhorst TotalCheck 3-in-1 Moisture Meter for Building Inspection RHT-S3 Humidity Sensor RHT-C1 Cable 26-ES Electrode 496 Pins (10 ten) CS-3 Sleeves (10 ten) PC/KIT Software Carrying Case Instructions Features Bright, clear digital display. Pin Mode: 5%-60% wood scale. Corrects for 69 individual wood species and temperature (°F and °C). 0.1% – 6% drywall scale. 0–100 numerical reference scale for non-wood building materials. Built-in connector accepts any Delmhorst electrode. Scan Mode: 0–300 numerical reference scale. Thermo-hygrometer with RH sensor: Temperature Range: -40°F - 255°F (-40°C - 124°C). Relative Humidity Range: 0%–100%. Dew Point Range: -40°F - 176°F (-40°C - 80°C). GPP Range: 0.1 - 3820 GPP (Grains Per Pound). Sensor can be used for in-situ concrete testing following the ASTM F2170 standard. Store up to 1400 readings with date and time stamp. View stored readings on screen. Organize readings by job for easy reference. Optional software lets you download readings to your computer and generate Excel reports. Size: 8 ½” x 3 3/8” x 1 ¾”. Weight: 11 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. CS-3 Plastic sleeve required when performing ASTM F-2170 tests on concrete. Used with the RH/T-S3 attachment included with Total Check and HT-4000F. Order in packs of 20 CS-3/20 HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. PC/KIT Enables you to download stored readings from the meter to a PC via infrared linking. This software will enable you to: Export job data to Excel. Customize printing options. View readings and stats in the application program. Save and print individual or group job readings. Customize job title. View data in Fahrenheit or Celsius. Append notes to each job. Generate graphical histogram. All these features are provided in a easy to use GUI interface, and are compatible with Windows 95/98/ME/2000/XP/Vista/7/8/10. The PC/KIT is included in several of our moisture meter packages, or may be ordered separately. It can be used with the Moisture Check, Navigator Pro, RDM-3, RDM-3P, and Total Check moisture meters Relative Humidity Test Kit The relative humidity test kit is great for testing the accuracy of our detachable RH/T-S1 and RH/T-S3 relative humidity sensors. The air inside the test kit bottle is controlled by a salt solution, which keeps the relative humidity constant. The kit is available with either 33% or 75% relative humidity (Order asRH/TK/33 and RH/TK/75 respectively). RH/T-C1 Extension cable that connects to the RH/T-S3, allowing you to easily view your meter’s screen while performing ASTM F-2170 tests on concrete. RH/T-S3 Detachable relative humidity/temperature sensor that is included with Total Check and HT-4000F. Can be used to obtain ambient RH/T readings, or for performing ASTM F-2170 tests on concrete. Order individually or in packs of 5 as RH/T-S3/5. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4". Great for use on roofs, insulation, or EIFS. 21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding. Downloads Delmhorst TechCheck Plus Moisture Meter for Building Inspection - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-totalcheck-3-in-1-moisture-meter-for-building-inspection-p-1702.html Wed, 16 Nov 2022 23:04:25 +0000 USD 1702 Delmhorst 989 TCHECK https://www.abqindustrial.net/store/images/Delmhorst%20TotalCheck%203-in-1%20Moisture%20Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-techscan-moisture-meter-for-building-inspection-p-1701.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1701 ]]>Delmhorst TechScanMoisture Meter for Building Inspection Easy to read analog display. Handheld, compact and lightweight. Temperature Range: -4 to 158°F/-20 to 70°C Introducing Delmhorst TechScan Pinless Moisture Meter. The fast, accurate, non-destructive way to check for moisture in walls and floors. Save time, and work with confidence, with TechScan. It's the next generation of pinless moisture meters designed for restoration professionals, flooring installers, and home inspectors. The right diagnostic tools are a must when addressing water damage, testing sub and top floors to ensure similar % moisture content, or assuring a home buyer of structural integrity before purchase. The Delmhorst TechScan pinless moisture meter make it easy to find moisture "hot spots" and narrow down areas affected by moisture. Use it as a stand-alone tool or with our pin-type moisture meter for further precise diagnosis. Kit Contents Delmhorst TechScanMoisture Meter for Building Inspection Instructions Features Easy to read analog display. Handheld, compact and lightweight. Two scales: Wood Scale - 5% - 30% moisture range for wood. Reference Scale - 0-100 color coded reference scale for non-wood building materials Temperature Range: -4 to 158°F/-20 to 70°C Calibrated to minimize false high readings Built-in calibration check. Rugged, one-piece sensor measures moisture up to 3/4" deep without damaging sample Take reading in hard-to-reach places easily with hold function  Adjustable alarm alerts you when preselected moisture level is reached, easily compare to established dry standard Advanced RF technology quickly scans wood, drywall, concrete, and other building materials Size: 5- 5/8" x 3- 5/16" x 1- 1/4" Weight: 8.5oz Rugged construction ensures years of reliable use.  Sturdy plastic carrying cse.  9V battery. 1-year warranty. Accessories SCB-1 The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the SCB-1 from a wood or metal tabletop surface. When using the SCB-1. the meter should display 18.0, +/-1.0 on the wood scale, and 51, +/-2.0 on the Reference scale Downloads Delmhorst TechCheck Plus Moisture Meter for Building Inspection - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-techscan-moisture-meter-for-building-inspection-p-1701.html Wed, 07 Feb 2024 19:41:46 +0000 USD 1701 Delmhorst 996 TECHSCANW https://www.abqindustrial.net/store/images/Delmhorst-TechScan-Moisture-Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-techcheck-plus-pin-type-moisture-meter-for-building-inspection-p-1700.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1700 ]]>Delmhorst TechCheck Plus Pin-Type Moisture Meter for Building Inspection Bright, clear digital display Scan Mode: (0-300 numerical reference scale) Spanish language option Given the challenging conditions of building inspection, installation, and drying jobs, it pays to have an easy-to-use moisture meter that you can depend on. The easy-to-use 2-in-1 Delmhorst TechCheck PLUS pin-type moisture meter was designed with simplicity in mind and helps to make even the most demanding job simple. The newly updated Delmhorst TechCheck PLUS moisture meter has all the great features you've come to expect, along with some new ones. Kit Contents Delmhorst TECHCHECK-PLUSW/CS TechCheck Plus Pin-Type Moisture Meter for Building Inspection Delmhorst TechCheck Plus Moisture Meter for Building Inspection Additional Contact Pins Carrying Case Instructions Delmhorst TECHCHECK-PLUS/PKG TechCheck Plus Pin-Type Moisture Meters for Building Inspection, Insulation Package Delmhorst TechCheck Plus Moisture Meter for Building Inspection 21-E Electrode Extra Contact Pins for the Meter Carrying Case Instructions Features Bright, clear digital display. Pin mode: 0.1% - 6% drywall scale, Delmhorst Exclusive. 6%-60% MC wood scale. Integral Contact pins mounted on top of meter provide 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Scan Mode: (0-300 numerical reference scale). Spanish language option. Built-in back-light makes reading in dark places a cinch. Auto-shutoff timer saves battery life. Audible, adjustable alarm alerts you when your pre-selected MC has been reached.     Size: 8 ½” x 3 3/8” x 1 ¾”. Weight: 11 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4". Great for use on roofs, insulation, or EIFS. 21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration. 22-E is also available as the 22-ET with a tapped handle for hard to reach areas. 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding. 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contactspins aren’t long enough Downloads Delmhorst TechCheck Plus Moisture Meter for Building Inspection - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-techcheck-plus-pin-type-moisture-meter-for-building-inspection-p-1700.html Wed, 16 Nov 2022 23:03:19 +0000 USD 1700 Delmhorst 978 TECHCHECK-PLUS https://www.abqindustrial.net/store/images/Delmhorst-TechCheckPlus-Moisture-Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bd-2100-digital-pin-type-moisture-meter-for-building-inspection-p-1699.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1699 ]]>Delmhorst BD-2100 Digital Pin-Type Moisture Meter for Building Inspection Bright, clear digital display Averages up to 100 accumulated readings Built-in calibration check The best-selling Delmhorst BD-2100 digital pin-type moisture meter is great for measuring moisture in a variety of different building materials, including wood, concrete, drywall, EIFS, roofing, insulation, and flooring. The Delmhorst BD-2100 moisture meter has a digital display, an adjustable alarm, and Delmhorst’s exclusive calibrated drywall scale. Kit Contents  Delmhorst BD-2100W/CS Digital Pin-Type Moisture Meter for Building Inspection Delmhorst BD-2100 Carrying case Extra Contact Pins Instructions Manual Delmhorst BD-2100/PKG Digital Pin-Type Moisture Meter for Building Inspection, Standard Package Delmhorst BD-2100 Carrying case Extra Contact Pins 21-E Electrode Instructions Manual Delmhorst BD-2100/26/PKG Digital Pin-Type Moisture Meter for Building Inspection, Flooring Package Delmhorst BD-2100 Carrying case Extra Contact Pins 26-ES Electrode 496 pins for the 26-ES electrode Instructions Manual Delmhorst BD-2100/EIFS/PKG Digital Pin-Type Moisture Meter for Building Inspection, EIFS Package Delmhorst BD-2100 Carrying case Extra Contact Pins 21-E Electrode 2 (two) 608/001 contact pins HP-1 Hole Punch Instructions Manual Delmhorst BD-2100/26/21/PKG Digital Pin-Type Moisture Meter for Building Inspection, Complete Package Delmhorst BD-2100 Carrying case Extra Contact Pins 26-ES Electrode 21-E Electrode 496 pins for the 26-ES electrode Instructions Manual Features Bright, clear digital display. Three scales: Wood Scale - 6% - 40% moisture range. Use for flooring and building material, such as wood studs, floor joists, subfloors. Reference Scale - Reads from 0 - 100 on a relative basis. Use on non-wood materials, such as concrete, plaster, and insulation. Gypsum Scale - 0.2%-50% moisture range. Use on drywall. Averages up to 100 accumulated readings. Built-in calibration check. Audible, adjustable alarm alerts you when your pre-selected MC has been reached. Integral contact pins mounted on top of meter provide 5/16” penetration. Built-in connector accepts any Delmhorst electrode.  Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty. Accessories 1849 An alternate to the 496 pin for the 26-ES, the 1849 is a 1 ½” insulated pin with 1/2" penetration. The 1849 is suitable for wood up to 2" thick. 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum 305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4. 496 496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick. 608 The 608 insulated contact pins measure 4" overall, and penetrate 3 1/4". Standard on 21-E and 18-ES electrodes, and can be used on roofing, insulation, timber, poles, and EIFS. Also available in 7” length with 6” penetration as 608/001. 632 Retainer used to hold contact pins in place. Used with #496, #1849, and #A-111 pins. Available in packs of 4 as 632/4. A-111 Another alternative to the 496, the A-111 is an uninsulated contact pin measures 1 7/16” and has 1/2" penetration. The A-111 is compatible with both the 26-ES and the 22-E, and its tapered point makes it easier to penetrate into hard surfaces. Can be used on wood up to 2" thick. HP-1 Makes pilot holes in stucco to reduce pin damage MCS-1 Moisture content standards are great for verifying that your Delmhorst moisture meter is in calibration. The MCS-1 can be used on any meter with a wood scale. With two electrical resistance values (12% and 22%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-1 is also available with a letter of certificationtraceable to NIST. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 26-ES The 496 contact pins that come with the 26-ES penetrate 1 1/8” and have insulated shanks so that only the tips are exposed. The pins make contact only at their uncoated tips and provide much more accurate readings of moisture content at various levels of penetration. This feature is useful for a variety of different applications Flooring installers: Penetrate through flooring to plywood sub-floor, or concrete. Dry kiln operators: Identify moisture gradients which helps to identify the drying pattern. Furniture manufacturers and craftsmen: Easily check high density hardwood that short pins are unable to penetrate Also available as the 26-ED, which includes gauge to measure pin penetration depth 21-E The 608 pins that come with the 21-E are insulated, except at the tips, and can reach a maximum penetration of 3-1/4". Great for use on roofs, insulation, or EIFS. 21-E is also available as the 21-E/001 with 6" penetration, or as the 21-ET with a tapped handle for hard to reach areas. 22-E Comes with A-111 uninsulated contact pins for 1 1/2" penetration. For use on plaster, masonry and wood. Will also accept 496, insulated pins; 1 1/16” penetration. 22-E is also available as the 22-ET with a tapped handle for hard to reach areas. 19-E/STC Features two 5'' long blades, bent to a 35° angle, and coated in Teflon except for the tips. Great for checking behind trim and baseboard molding. 2-E/SPLIT Makes moisture testing in hard to reach places a breeze. Simply attach any length metal “probe” to the alligator clips on the end of the 2-E/Split and test behind toe kicks, through drywall, or any other area where our standard length contacts pins aren’t long enough. Downloads Delmhorst BD-2100 Moisture Meter for Building Inspection - Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online F.A.Q. BUILDING INSPECTION: Why should i use a Moisture Meter? Home Inspectors, Pest Control Operators and EIFS inspectors know that Moisture intrusion is the single most important factor affecting the integrity of building structures. Delmhorst Instrument Company offers Moisture Meter packages specifically manufactured to meet the needs of inspectors. Proper use of a Moisture Meter allows the inspector to easily identify the source of Moisture and to locate areas in the building that have been affected by moisture. How does a Moisture Meter work? There are two types of Moisture Meters typically used by the home inspector. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Can i use a Moisture Meter to check for pest infestation? Yes -- a few Meter readings in key locations of the structure will quickly indicate if the areas are safe or in danger of infestation. We recommend using pin-type Meters for pest control applications as the best way to identify the exact point of infestation behind walls and ceilings. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at different depths, noting readings at each level of penetration. A pinless Meter is a good way to identify infested areas, as long as you do not have to penetrate into a hidden material. At what level of Moisture does infestation or decay occur? Wood technologists and pest control experts agree that most fungi need at least 20% MC. Readings higher then 20% is susceptible to mold growth and decay. Readings in the 17%-20% are borderline and normally require further testing. On the other hand infestation can occur at much lower levels, especially in humid conditions. Old House Borer and Powderpost Beetles can attack wood that falls in the 12-13% range. Which type of Moisture Meter works best for EIFS? To quickly identify wet areas, a pinless Meter is easy to use. Pinless Meters offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. Pinless Meters read Moisture closest to the source of the magnetic field, in this case, at the surface. Most pin-less Meters read at a depth from 1/2" to 1". Moisture that resides in the substrate or insulation may go undetected without using a deep penetrating electrode. It is also important to remember that any metal or other conductive material behind the EIFS may give false readings. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in the substrate and framing. A pin-type uses two pins that penetrate into the building at the users desired depth. When insulated contact pins are used, only the uncoated tips are exposed to the wood fiber, providing an accurate reading of Moisture content at various levels of penetration. Pin-type Meters are the only instruments that allow the inspector to identify exact location of Moisture at a given point. Many EIFS inspectors use both types of Meters. They can quickly identify problem areas using a pin-less Meter, and also use a pin-type Meter to identify exact location of Moisture in the wood substrate. Where does most Moisture intrusion occur in eifs clad houses? Most Moisture intrusion occurs around windows, doors and any flashing. In many cases the Moisture intrusion is directly related to poor installation practices. How can i find Moisture in the substrate or frame of the house. The most effective way to check for Moisture in the substrate or frame is to us our 21-E electrode with 6" penetration pins. This method allows you to locate Moisture behind the EIFS without it having to be torn away. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst Moisture Meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the Meter in clean, dry place Change batteries and pins as needed Keep the Meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any doubt about the working condition of your Meter, send it to Delmhorst. We can repair and re-calibrate your instrument to its original standards and return it to you quickly.   FLOORING & WOOD PRODUCTS: Why should i use a Moisture Meter? Structurally sound and beautiful in appearance, wood is the ideal raw material. Flooring professionals know that Moisture content is the single most important factor affecting the quality of a wood flooring installation. To ensure quality from the manufacturer to the final installation, Delmhorst offers a full range of Moisture Meters that help minimize defects such as shrinkage, cracks, and splits. Years of experience, high-tech tools and controls, and premium grade wood cannot make a difference if Moisture content goes unchecked. How does a Moisture Meter work? There are two types of Moisture Meters typically used in the flooring industry. Pin-type Meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless Meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. Which type of Moisture Meter works best for a flooring job? To quickly identify wet areas in floors, pinless Meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pinless Meter may also be used to determine if water-born finishes are dry and ready for a second application. A pin type Meter, on the other hand, is the best way to identify the exact location of Moisture in sub-floors. The key to finding hidden Moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into the floor and through to the sub-floor, noting readings at each level of penetration. What are the ideal Moisture conditions for the sub-floor and wood flooring so problems can be avoided? Flooring strips or planks - and the sub-floor - should be brought to equilibrium before installation. Best results are obtained when the wood sub-floor is within 4% MC of the flooring, maximum. If the floor is on concrete, especially a slab on grade, the challenge is to be sure that the slab is dry and not likely to pick up Moisture later on. Please refer to the Operating Instructions section under PRODUCT SUPPORT for more info. Why doesn't the Meter give Moisture content in percent on concrete? Because the exact makeup of concrete is usually unknown, it is virtually impossible to provide a %MC calibration. Delmhorst Moisture Meters feature a 0-100 reference scale that provides “dry to wet” indications of the presence of Moisture. Factors that affect concrete Moisture readings include it's mix ratio and type, voids, and depth that the pin penetrates. How does static electricity affect Meter readings? In cold and/or dry climates, static charges may cause erratic Meter readings in the range below 8 percent. Measuring such high resistance under these conditions is difficult enough, but the winter months can make it more so. The analog Meter pointer "jumps" all over the scale or the digital display may flash erratic numbers. To minimize the effect of static: Try not to let the electrode cable dangle. Drive the electrode pins into the wood with the Meter turned off, and then turn the Meter on when you are ready to take the reading. After driving the pins, place your hands next to them on each side of the electrode to help discharge the static from the board. You can also try passing a damp cloth over the board's surface to pick up any static charges before driving the pins. These suggestions are not guaranteed. However, depending on the conditions, any one of them can work, either alone or in combination with another. Are there board width limitations in using Moisture Meters? Board width is not a limiting factor when using a pin type Moisture Meter. As long as the pins make good contact, the Meter can be used on anything from small dowels to wide planks. For accurate results with a pinless Meter, the material you're testing must be at least the width of the scanning area on the bottom of the Meter. Otherwise the Meter will not make firm contact with the board and may provide inconsistent, unreliable readings. How Do Delmhorst Meters Handle Readings on Rough-Surfaced Lumber and Cupped Boards? With a pin-type Meter, these conditions are not a problem. Just drive the pins as you would normally, insuring firm, positive contact and detect unknown gradients. Pinless Meters, however, need firm contact to a flat surface so their readings on uneven surfaces may be unreliable. How do i determine if the Moisture problem is in the finished floor or the sub floor? In order to find this out, you must use a pin type Meter with insulated contact pins. First, take several readings in the layer just below the surface; then make a series of core readings, closer to the center of the board thickness. After you have noted these readings, hammer the pins through the flooring material until you make contact with the sub floor. If your readings throughout this process are uniform, then there is not a Moisture problem. If readings increase as you go further into the floor, and again in the sub floor, this indicates that the sub floor is a source of Moisture. How does temperature affect the accuracy of Meter readings? After Moisture content and a Moisture gradient, if one exists, wood temperature is the most important factor affecting the accuracy of your readings. As wood temperature increases its electrical resistance decreases and indicated Moisture content rises. The lower the temperature, the lower the indicated Moisture content. Depending on the temperature and Moisture content, you may have to make a correction. Does the glue used in plywood affect Meter accuracy? In most cases, no. To verify this, use insulated pin to make individual tests by touching the outer ply, glue lines, and center plys. If the glue reads the same as wood, use the Meter on plywood as you would any solid material and take the readings at face value, without species correction. How Do I Keep a Delmhorst Meter in Good Working Condition? Delmhorst moisture meters are well known for their ruggedness and ability to withstand years of rough handling. Like any testing instrument, a little care goes a long way toward trouble-free service: Store the meter in clean, dry place Change batteries and pins as needed Keep the meter and electrode clean by using any biodegradable cleanser sparingly on external parts only. If you have any further questions on using a moisture meter for flooring applications   RESTORATION: Why should I use a moisture meter for a water-damaged structure? The only way to be sure you are properly drying a structure after water damage is to monitor the drying process with a moisture meter. Even if you have the most advanced drying equipment, you cannot be sure they are working effectively without the use of a moisture meter. How does a moisture meter work? There are two types of moisture meters typically used in the restoration industry. Pin-type meters, which utilize the principle of electrical resistance, use wood or other hygroscopic materials as an element in a circuit by driving two pins or electrodes into it. Pinless meters use radio frequency signals to penetrate the material being tested. There is no pin intrusion into the surface of the material you are checking. What type of meter works best for water-damaged structures? To quickly identify wet areas in walls and floors, pinless meters are easy to use. They offer the convenience of testing a large area quickly, and help you determine if further testing is required in certain spots. A pin type meter, on the other hand, is the best way to identify the exact location of water damage behind walls, in sub-floors, or in any other area where moisture may be hidden behind another surface. The key to finding hidden moisture is to use an electrode with insulated contact pins. These pins read only at their un-insulated pin tips, allowing the contractor to drive the pins into material at various depths, noting readings at each level of penetration. When do I check the moisture of a structure? As soon as you arrive at a job-site. It is crucial to check moisture levels in both water-damaged areas and areas that were not exposed to water. This enables you to establish a benchmark or target moisture level to reach at the end of the drying process. Use the meter continuously while drying, to confirm the progress of your work, and again before signing off. Remember, without a moisture meter, you have no way of knowing that you have dried the structure properly to "pre-loss" conditions. What areas of a structure can be monitored using a moisture meter? Check any area that has been exposed to water damage, namely wood floors, sub-floor, joists, studs or paneling. Also check for moisture in concrete sub-floors, drywall, insulation and behind trim and moldings. Because Delmhorst moisture meters have different scales to measure %MC in wood, gypsum, and other non-wood building materials, it's easy to check all these areas with one moisture meter. How can I check moisture levels behind baseboards and trim molding without removing them? Use our 19-E/ST electrode. The flat blades of this electrode can be slid easily between the wall and trim, making it easy to check these hard to reach places, while leaving everything in tact. Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-water-damage-restoration-c-107_139/delmhorst-bd-2100-digital-pin-type-moisture-meter-for-building-inspection-p-1699.html Tue, 09 Apr 2024 21:21:25 +0000 USD 1699 Delmhorst 659 BD-2100 https://www.abqindustrial.net/store/images/Delmhorst-BD-2100-Moisture-Meter.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-p-2000-digital-pin-type-paper-moisture-meter-p-1698.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1698 ]]>Delmhorst P-2000 Digital Pin-Type Paper Moisture Meter Built-in calibration check Averages up to 100 accumulated readings The DelmhorstP-2000 pin-type paper moisture meter is an electrical resistance-type moisture meter, utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Various external electrodes are also available for specific applications. The Delmhorst P-2000 Moisture Meter is especially useful for testing paperboard, corrugated stock, and paper tubes. It is ideal for plant superintendents, inspectors, buyers, and sales people. Kit Contents Delmhorst P-2000W/CS Digital Pin-Type Paper Moisture Meter Delmhorst P-2000 Digital Pin Type Paper Moisture Meter Instructions Delmhorst P-2000/PKG Digital Pin-Type Paper Moisture Meter Package Delmhorst P-2000 Digital Pin Type Paper Moisture Meter 830-2 Prod for testing standard and high density bales H-4 Handle - Electrode handle Carrying Case Instructions Features Bright, clear digital display. Three scales: 4.3%-18% MC for paper. 5%-40%, for baled scrap paper. 0 - 100 arbitrary scale, for obtaining relative moisture indications on other material. Built-in calibration check. Averages up to 100 accumulated readings. Audible, adjustable alarm alerts you when your pre-selected MC has been reached. Integral contact pins mounted on top of meter provide 5/16” penetration. Built-in connector accepts any Delmhorst electrode. Size: 8” x 3” x 1 5/8”. Weight: 10 oz. Rugged construction ensures years of reliable use. Sturdy plastic carrying case. 9V battery. 1-year warranty Accessories 2497/A-100 Uninsulated pin and retainer with 5/16" penetration. Standard on all meters with built-in pins and the 2-E and 4-E electrodes. Used on wood up to 6/4 (1 ½”), concrete and gypsum MCS-2 This moisture content standard is great for verifying that your P-2000 or RDM-3P paper moisture meters are in calibration. With two electrical resistance values (6% and 10%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-2 is also available with a letter of certification traceable to NIST. For P-2000 meters with serial numbers up to 19389, please order the MCS-2 For P-2000 meters with serial numbers of 19390 and above, please order the MCS-2X. Eletrodes Delmhorst offers a wide assortment of electrodes known throughout the industry for their durability. All Delmhorst electrodes fit any Delmhorst moisture meter. Below are electrodes that are typically used for this model: 12-E Double roller type for measuring moisture content on a moving web 15-E Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block. 19-E Blade type electrode for measuring of paper on skids. Blades are 5" long. Longer blades available on special order 2-E Fitted with the same 5/16" penetration pins that are mounted on our pin type meters. This electrode is great for a variety of different applications Home inspector: use on wood joists and drywall. Paper producer: use on curved surfaces such as cardboard and paper tubes. Woodworker: use on timber, poles, and veneer/ 2-E is also available as the 2- ET with a tapped handle for hard to reach areas. Can also be fitted with A-103 uninsulated pins with 1 3/32” length and 11/16” penetration. 43-E Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs. 55-E Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation 830 Series Prods for testing standard and high density bales (requires H-4 Handle). Available as: 830-2 – 10” prod 830-3 – 18” prod 830-4 – 36” prod 830-5 – 12” for hops H-4 Handle Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing Downloads Delmhorst P-2000 Moisture Meter- Owner’s Manual Delmhorst Accessories & Electrodes - Catalog Online Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/delmhorst-p-2000-digital-pin-type-paper-moisture-meter-p-1698.html Tue, 09 Apr 2024 22:44:11 +0000 USD 1698 Delmhorst 947 P-2000 https://www.abqindustrial.net/store/images/Delmhorst-P-2000-1.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50t-positest-at-a-automatic-pull-off-adhesion-tester-50x50mm-dollies-tile-kit-ata50t-p-1697.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1697 ]]>DeFelsko ATA50T PosiTest AT-A Automatic Pull-off Adhesion Tester 50mm Dollies C1583 Kit # ATA50T-B Typical Applications: Concrete Surfaces & Overlays Range 0.4 - 3.8 MPa / 50 - 560 psi / 100 - 7550 N Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at a user-specified rate Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The DeFelsko ATA50T-B PosiTest AT-A Automatic Pull-off Adhesion Tester with 50mm C1583 Kit measures the force required to pull a specified test area of coating away from a substrate using hydraulic pressure. An electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. The pump greatly reduces user effort and the risk of influencing the pulling process. The AT-A's built-in rechargeable battery performs over 200 tests per charge. The supplied AC adapter / charger allows you to continue testing with AC power while the battery recharges. The DeFelsko Positest AT-A features an environmentally sealed enclosure. It is weatherproof, dustproof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATA50T (ASTM C1583 and EN 1542) PosiTest AT-A Adhesion Tester 50mm C1583 Kit includes everything needed for testing: PosiTest AT-A Automatic Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger C1583 stand-off (NOTE: drill required-not included) 50mm C1583 steel dollies (4) 50mm diamond grit cutting tool with arbor Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case, instruction booklet and shoulder strap Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-A Automatic Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process User adjustable pull rate, pull limit and hold time Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches Impact and scratch resistant color touch screen with keypad for operation with or without gloves Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) Key Features Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process Impact and scratch resistant color touch screen with keypad for operation with or without gloves Built-in rechargeable battery performs over 200 tests per charge. Continue testing with AC power while the battery recharges. Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Rubberized, shock absorbing grips provide a stable, skid-resistant footing Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths. Maximum pull-off pressure by dolly size 10 mm: 14000 psi (96 MPa) 14 mm: 7000 psi (50 MPa) 20 mm: 3500 psi (24 MPa) 50 mm: 560 psi (3.8 MPa) User selectable measurement units: psi (pounds per square inch), MPa (Megapascal), Nmm2 (Newtons per millimeter square) or Newton (force) User adjustable pull rate, pull limit and hold time Rotating display for horizontal and vertical use Calibrated and certified to ± 1% accuracy using a NIST traceable load cell * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others Memory and Reporting Features Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for 100,000 pulls in up to 1,000 batches Record the results as pass/fail and the nature of fracture - cohesive, adhesive and glue failures Wirelessly connect to your smart device using our free PosiTector App (Apple iOS and Android) WiFi technology wirelessly communicates with PosiSoft.net, downloads software updates and allows access to stored measurement data using standard web browsers (see WiFi Features for full details) PosiSoft USB Drive—stored readings and graphs can be accessed via USB using universal PC/Mac web browsers or file explorers. No software required Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) software solutions PosiTector App Add images and notes using the camera or keyboard Create customized, professional PDF reports Share, backup, synchronize and report measurement data Auto-pairing Bluetooth (BLE) connection See the Help File to learn about how it works Touch Screen Display Use the touch screen to interact with menu options. Swipe horizontally to navigate between views or vertically to move between batch readings. Alternatively, the keypad can be used for navigation and selection. User adjustable dolly size, pull rate,  pull limit and hold time. Batch summary provides an at-a-glance review of test results. View test parameters and reading results. Reading is recorded as pass or fail based on set test parameters. The pass/fail results can be revised. Notes can be added for each reading. Include a note for a batch (group) of readings. Record the nature of failure - cohesive, adhesive and glue failures. Recording the Nature of the Fracture Upon completion of a pull-off test, the dolly and coated surface should be examined. In addition to pull-off force, many National and International standards such as ASTM D4541 and ISO 4624 require the nature of the fracture to be recorded.‍ Cohesive fracture: fracture occurs within a coating layer (same coating on dolly face and coated surface). Adhesive fracture: fracture occurs at the interface between layers (coating on dolly face differs from surface). Glue failure: visible separation of the glue from itself, the coating or dolly (no coating visible on the dolly face). The cohesive and adhesive fracture visual analysis can be recorded using the PosiTest AT-A's keypad or touch screen display. Alternatively, the information can be reported using the PosiTector App. Fractures are visually estimated and recorded as a percent of each. The two layer example below illustrates a cohesive fracture within coating layer 1 and layer 2 (visually estimated at 50% each). Recorded results are included in reports. The PosiTest AT-A can record fracture information for up to five layers. For full details and examples see Visual Analysis and Recording of Test Results. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Full Instruction Manual DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Literature DeFelsko PosiTest-AT Pull Off Adhesion - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50t-positest-at-a-automatic-pull-off-adhesion-tester-50x50mm-dollies-tile-kit-ata50t-p-1697.html Mon, 21 Aug 2023 22:06:54 +0000 USD 1697 DeFelsko 997 PosiTest ATA50T-B https://www.abqindustrial.net/store/images/DeFelsko-ATA50T-B-PosiTest-ATA50T-Automatic-Pull.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50c-positest-at-a-automatic-pull-off-adhesion-tester-50mm-dollies-c1583-kit-ata50c-b-p-1696.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1696 ]]>DeFelsko ATA50C PosiTest AT-A Automatic Pull-off Adhesion Tester 50mm Dollies C1583 Kit # ATA50C-B Typical Applications: Concrete Surfaces & Overlays Range 0.4 - 3.8 MPa / 50 - 560 psi / 100 - 7550 N Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at a user-specified rate Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The DeFelsko ATA50C-B PosiTest AT-A Automatic Pull-off Adhesion Tester with 50mm C1583 Kit measures the force required to pull a specified test area of coating away from a substrate using hydraulic pressure. An electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. The pump greatly reduces user effort and the risk of influencing the pulling process. The AT-A's built-in rechargeable battery performs over 200 tests per charge. The supplied AC adapter / charger allows you to continue testing with AC power while the battery recharges. The DeFelsko Positest AT-A features an environmentally sealed enclosure. It is weatherproof, dustproof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATA50C (ASTM C1583 and EN 1542) PosiTest AT-A Adhesion Tester 50mm C1583 Kit includes everything needed for testing: PosiTest AT-A Automatic Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger C1583 stand-off (NOTE: drill required-not included) 50mm C1583 steel dollies (4) 50mm diamond grit cutting tool with arbor Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case, instruction booklet and shoulder strap Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-A Automatic Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process User adjustable pull rate, pull limit and hold time Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches Impact and scratch resistant color touch screen with keypad for operation with or without gloves Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) Key Features Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process Impact and scratch resistant color touch screen with keypad for operation with or without gloves Built-in rechargeable battery performs over 200 tests per charge. Continue testing with AC power while the battery recharges. Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Rubberized, shock absorbing grips provide a stable, skid-resistant footing Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths. Maximum pull-off pressure by dolly size 10 mm: 14000 psi (96 MPa) 14 mm: 7000 psi (50 MPa) 20 mm: 3500 psi (24 MPa) 50 mm: 560 psi (3.8 MPa) User selectable measurement units: psi (pounds per square inch), MPa (Megapascal), Nmm2 (Newtons per millimeter square) or Newton (force) User adjustable pull rate, pull limit and hold time Rotating display for horizontal and vertical use Calibrated and certified to ± 1% accuracy using a NIST traceable load cell * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others Memory and Reporting Features Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for 100,000 pulls in up to 1,000 batches Record the results as pass/fail and the nature of fracture - cohesive, adhesive and glue failures Wirelessly connect to your smart device using our free PosiTector App (Apple iOS and Android) WiFi technology wirelessly communicates with PosiSoft.net, downloads software updates and allows access to stored measurement data using standard web browsers (see WiFi Features for full details) PosiSoft USB Drive—stored readings and graphs can be accessed via USB using universal PC/Mac web browsers or file explorers. No software required Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) software solutions PosiTector App Add images and notes using the camera or keyboard Create customized, professional PDF reports Share, backup, synchronize and report measurement data Auto-pairing Bluetooth (BLE) connection See the Help File to learn about how it works Touch Screen Display Use the touch screen to interact with menu options. Swipe horizontally to navigate between views or vertically to move between batch readings. Alternatively, the keypad can be used for navigation and selection. User adjustable dolly size, pull rate,  pull limit and hold time. Batch summary provides an at-a-glance review of test results. View test parameters and reading results. Reading is recorded as pass or fail based on set test parameters. The pass/fail results can be revised. Notes can be added for each reading. Include a note for a batch (group) of readings. Record the nature of failure - cohesive, adhesive and glue failures. Recording the Nature of the Fracture Upon completion of a pull-off test, the dolly and coated surface should be examined. In addition to pull-off force, many National and International standards such as ASTM D4541 and ISO 4624 require the nature of the fracture to be recorded.‍ Cohesive fracture: fracture occurs within a coating layer (same coating on dolly face and coated surface). Adhesive fracture: fracture occurs at the interface between layers (coating on dolly face differs from surface). Glue failure: visible separation of the glue from itself, the coating or dolly (no coating visible on the dolly face). The cohesive and adhesive fracture visual analysis can be recorded using the PosiTest AT-A's keypad or touch screen display. Alternatively, the information can be reported using the PosiTector App. Fractures are visually estimated and recorded as a percent of each. The two layer example below illustrates a cohesive fracture within coating layer 1 and layer 2 (visually estimated at 50% each). Recorded results are included in reports. The PosiTest AT-A can record fracture information for up to five layers. For full details and examples see Visual Analysis and Recording of Test Results. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Full Instruction Manual DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Literature DeFelsko PosiTest-AT Pull Off Adhesion - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50c-positest-at-a-automatic-pull-off-adhesion-tester-50mm-dollies-c1583-kit-ata50c-b-p-1696.html Mon, 21 Aug 2023 22:06:53 +0000 USD 1696 DeFelsko 971 PosiTest ATA50C-B https://www.abqindustrial.net/store/images/DeFelsko-ATA50C-B-PosiTest-ATA50C-Automatic-Pull.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50-positest-at-a-automatic-pull-off-adhesion-tester-with-50mm-dollies-kit-ata50a-b-p-1695.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1695 ]]>DeFelsko ATA50 PosiTest AT-A Automatic Pull-off Adhesion Tester with 50mm Dollies Kit # ATA50A-B Typical Applications: Coatings on Concrete, Wood and Plastic Range 0.4 - 3.8 MPa / 50 - 560 psi / 100 - 7550 N Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at a user-specified rate Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The DeFelsko ATA50 PosiTest AT-A Automatic Pull-off Adhesion Tester ATA50A-B with 50mm Kit measures the force required to pull a specified test area of coating away from a substrate using hydraulic pressure. An electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. The pump greatly reduces user effort and the risk of influencing the pulling process. The AT-A's built-in rechargeable battery performs over 200 tests per charge. The supplied AC adapter / charger allows you to continue testing with AC power while the battery recharges. The DeFelsko Positest AT-A features an environmentally sealed enclosure. It is weatherproof, dustproof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATA50 PosiTest AT-A Adhesion Tester 50mm Kit includes everything needed for testing: PosiTest AT-A Automatic Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger 50mm stand-off 50mm dollies (8) 50mm cutting tool Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB Cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case, instruction booklet and shoulder strap Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-A Automatic Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process User adjustable pull rate, pull limit and hold time Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches Impact and scratch resistant color touch screen with keypad for operation with or without gloves Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) Key Features Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process Impact and scratch resistant color touch screen with keypad for operation with or without gloves Built-in rechargeable battery performs over 200 tests per charge. Continue testing with AC power while the battery recharges. Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Rubberized, shock absorbing grips provide a stable, skid-resistant footing Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths. Maximum pull-off pressure by dolly size 10 mm: 14000 psi (96 MPa) 14 mm: 7000 psi (50 MPa) 20 mm: 3500 psi (24 MPa) 50 mm: 560 psi (3.8 MPa) User selectable measurement units: psi (pounds per square inch), MPa (Megapascal), Nmm2 (Newtons per millimeter square) or Newton (force) User adjustable pull rate, pull limit and hold time Rotating display for horizontal and vertical use Calibrated and certified to ± 1% accuracy using a NIST traceable load cell * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others Memory and Reporting Features Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for 100,000 pulls in up to 1,000 batches Record the results as pass/fail and the nature of fracture - cohesive, adhesive and glue failures Wirelessly connect to your smart device using our free PosiTector App (Apple iOS and Android) WiFi technology wirelessly communicates with PosiSoft.net, downloads software updates and allows access to stored measurement data using standard web browsers (see WiFi Features for full details) PosiSoft USB Drive—stored readings and graphs can be accessed via USB using universal PC/Mac web browsers or file explorers. No software required Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) software solutions PosiTector App Add images and notes using the camera or keyboard Create customized, professional PDF reports Share, backup, synchronize and report measurement data Auto-pairing Bluetooth (BLE) connection See the Help File to learn about how it works Touch Screen Display Use the touch screen to interact with menu options. Swipe horizontally to navigate between views or vertically to move between batch readings. Alternatively, the keypad can be used for navigation and selection. User adjustable dolly size, pull rate,  pull limit and hold time. Batch summary provides an at-a-glance review of test results. View test parameters and reading results. Reading is recorded as pass or fail based on set test parameters. The pass/fail results can be revised. Notes can be added for each reading. Include a note for a batch (group) of readings. Record the nature of failure - cohesive, adhesive and glue failures. Recording the Nature of the Fracture Upon completion of a pull-off test, the dolly and coated surface should be examined. In addition to pull-off force, many National and International standards such as ASTM D4541 and ISO 4624 require the nature of the fracture to be recorded.‍ Cohesive fracture: fracture occurs within a coating layer (same coating on dolly face and coated surface). Adhesive fracture: fracture occurs at the interface between layers (coating on dolly face differs from surface). Glue failure: visible separation of the glue from itself, the coating or dolly (no coating visible on the dolly face). The cohesive and adhesive fracture visual analysis can be recorded using the PosiTest AT-A's keypad or touch screen display. Alternatively, the information can be reported using the PosiTector App. Fractures are visually estimated and recorded as a percent of each. The two layer example below illustrates a cohesive fracture within coating layer 1 and layer 2 (visually estimated at 50% each). Recorded results are included in reports. The PosiTest AT-A can record fracture information for up to five layers. For full details and examples see Visual Analysis and Recording of Test Results. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Full Instruction Manual DeFelsko ATA PosiTest AT-A Automatic Pull-off Adhesion Tester - Literature DeFelsko PosiTest-AT Pull Off Adhesion - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-ata50-positest-at-a-automatic-pull-off-adhesion-tester-with-50mm-dollies-kit-ata50a-b-p-1695.html Mon, 21 Aug 2023 22:06:52 +0000 USD 1695 DeFelsko 933 PosiTest ATA50A-B https://www.abqindustrial.net/store/images/DeFelsko-ATA50A-B-PosiTest-ATA50-Automatic-Pull.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50t-positest-at-m-manual-pull-off-adhesion-tester-with-50x50mm-dollies-tile-kit-atm50t-b-p-1694.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1694 ]]>DeFelsko ATM50T PosiTest AT-M Manual Pull-off Adhesion Tester with 50x50mm Dollies Tile Kit Typical Applications: Cementitious Adhesives for Tiles Range 0.4 - 2.585 MPa / 50 - 37580 psi Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The Positest ATM50T Measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements. A manual hydraulic pump is designed to apply smooth and continuous pressure with a single stroke. The AT-M is features an environmentally sealed enclosure. It is weatherproof, dustproof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATM50T (EN 12004-2) PosiTest AT-M Adhesion Tester 50 x 50mm Tile Kit includes everything needed for testing: PosiTest AT-M Manual Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger 50mm x 50mm stand-off 50mm x 50mm steel dollies (4) Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case and instruction booklet Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-M Manual Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls Compatible with PosiSoft Desktop for viewing, printing and storing measurement data Key Features Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke NEW High-contrast, easy to read color display Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls NEW Field replaceable AAA alkaline batteries provide up to 16 hours of testing 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths 10 mm: 10000 psi (70 MPa) 14 mm: 6000 psi (40 MPa) 20 mm: 3000 psi (20 MPa) 50 mm: 480 psi (3.3 MPa) 50x50 mm: 375 psi (2.585 MPa) User selectable measurement units: psi (pounds per square inch) or MPa (Megapascal) Every PosiTest Adhesion Tester is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products PosiTest AT-A Automatic Pull Off Adhesion Tester AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko PosiTest-ATPull-off Adhesion Tester - Full Instruction Manual DeFelsko PosiTest-ATPull-off Adhesion Tester - Literature DeFelsko PosiTest-ATPull-off Adhesion Tester - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50t-positest-at-m-manual-pull-off-adhesion-tester-with-50x50mm-dollies-tile-kit-atm50t-b-p-1694.html Mon, 21 Aug 2023 22:06:48 +0000 USD 1694 DeFelsko 988 PosiTest ATM50T-B https://www.abqindustrial.net/store/images/defelsko-positest-atm50t.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50c-positest-at-m-manual-pull-off-adhesion-tester-with-50mm-dollies-c1583-kit-atm50c-b-p-1693.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1693 ]]>DeFelsko ATM50C PosiTest AT-M Manual Pull-off Adhesion Tester with 50mm Dollies C1583 Kit Typical Applications: Concrete Surfaces & Overlays Range: 0.4 - 3.5 MPa / 50 - 480 psi Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The DeFelsko AT-M PosiTest AT-M Manual Pull Off Adhesion Tester with 50mm C1583 Kit measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements. A manual hydraulic pump is designed to apply smooth and continuous pressure with a single stroke. The DeFelsko ATM50C PosiTest AT-M Manual Pull Off Adhesion Tester with 50mm C1583 Kit features an environmentally sealed enclosure. It is weatherproof, dust proof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATM50C (ASTM C1583 and EN 1542) PosiTest AT-M Adhesion Tester 50mm C1583 Kit includes everything needed for testing: PosiTest AT-M Manual Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger C1583 stand-off (NOTE: drill required-not included) 50mm C1583 steel dollies (4) 50mm diamond grit cutting tool with arbor Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB Cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case and instruction booklet Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-M Manual Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls Compatible with PosiSoft Desktop for viewing, printing and storing measurement data Key Features Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke NEW High-contrast, easy to read color display Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls NEW Field replaceable AAA alkaline batteries provide up to 16 hours of testing 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths 10 mm: 10000 psi (70 MPa) 14 mm: 6000 psi (40 MPa) 20 mm: 3000 psi (20 MPa) 50 mm: 480 psi (3.3 MPa) 50x50 mm: 375 psi (2.585 MPa) User selectable measurement units: psi (pounds per square inch) or MPa (Megapascal) Every PosiTest Adhesion Tester is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products PosiTest AT-A Automatic Pull Off Adhesion Tester AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko PosiTest-ATPull-off Adhesion Tester - Full Instruction Manual DeFelsko PosiTest-ATPull-off Adhesion Tester - Literature DeFelsko PosiTest-ATPull-off Adhesion Tester - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50c-positest-at-m-manual-pull-off-adhesion-tester-with-50mm-dollies-c1583-kit-atm50c-b-p-1693.html Mon, 21 Aug 2023 22:06:47 +0000 USD 1693 DeFelsko 986 PosiTest ATM50C-B https://www.abqindustrial.net/store/images/defelsko-positest-atm50c.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50-positest-at-m-manual-pull-off-adhesion-tester-with-50mm-dollies-kit-atm50a-b-p-1692.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1692 ]]>DeFelsko ATM50 PosiTest AT-M Manual Pull-off Adhesion Tester with 50mm Dollies Kit # ATM50A Typical Applications: Lower bond strength coating on wood, concrete and plastic Range: 0.4 - 3.3 MPa / 50 - 480 psi Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12 The DeFelsko ATM50 PosiTest AT-M Manual Pull Off Adhesion Tester with 50mm Kit Measures adhesion of coatings to metal, wood, concrete and other substrates - Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements. A manual hydraulic pump is designed to apply smooth and continuous pressure with a single stroke. The DeFelsko ATM50A PosiTest AT-M Manual Pull Off Adhesion Tester with 50mm Kit features an environmentally sealed enclosure. It is weatherproof, dustproof and shockproof. Meeting or exceeding IP65 rating. Kit Contents The DeFelsko ATM50 PosiTest AT-M Adhesion Tester 50mm Kit includes everything needed for testing: PosiTest AT-M50 Manual Pull-Off Adhesion Tester Built-in rechargeable NiMH battery with charger 50mm stand-off 50mm dollies (8) 50mm cutting tool Abrasive pad, cotton swabs, glue with mixing sticks and palettes PosiSoft Software and USB cable Certificate of Calibration traceable to NIST Sturdy, lightweight carrying case and instruction booklet Two-year warranty Features Simple Easily select dolly sizes, change measurement units, or store readings with the touch of a button Inexpensive, single-use dollies and plates eliminate cleaning for re-use and can be kept as a permanent record Each kit comes with everything needed for testing Durable Environmentally sealed enclosure—weatherproof, dustproof and shockproof - meets or exceeds IP65 Hard-shell carrying case included, with optional upgrade to a heavy-duty Pelican case (Automatic models only) Two year warranty Accurate Calibrated and certified to ± 1% accuracy using a NIST traceable load cell Certificate of Calibration showing traceability to NIST included Self-aligning dolly enables accurate measurements on smooth or uneven surfaces Conforms to national and international standards including ASTM C1583/ D4541/D7234, ISO 4624/16276-1, BS EN 12004-2, AS/NZS 1580.408.5, and others Versatile Select from four stand-offs to suit nearly any application Internal memory stores maximum pull-off pressure, rate of pull, test duration, and dolly size 10 mm, 14 mm, 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 dollies maximize capability and measurement resolution across a wide range of bond strengths Powerful Sealed USB port for fast, simple connection to a PC Includes PosiSoft suite of software for viewing and reporting data PosiTest AT-M Manual Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls Compatible with PosiSoft Desktop for viewing, printing and storing measurement data Key Features Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke NEW High-contrast, easy to read color display Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65 Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces Pull Rate Indicator to manually monitor and adjust the rate of pull Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls NEW Field replaceable AAA alkaline batteries provide up to 16 hours of testing 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths 10 mm: 10000 psi (70 MPa) 14 mm: 6000 psi (40 MPa) 20 mm: 3000 psi (20 MPa) 50 mm: 480 psi (3.3 MPa) 50x50 mm: 375 psi (2.585 MPa) User selectable measurement units: psi (pounds per square inch) or MPa (Megapascal) Every PosiTest Adhesion Tester is calibrated and certified to ± 1% accuracy using a NIST traceable load cell Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data * Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off). Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest AT Frequently Asked Questions Optional Accessories DeFelsko Dollies for PosiTest AT Adhesion Testers Loading fixtures, stubs for adhesion testing. Choose from the following sizes and quantities: Size Quantity Order Code 10 mm 10 DOLLY10 14 mm 10 DOLLY14 20 mm 10 DOLLY20 50 mm 4 DOLLY50 DeFelsko Dolly Multipacks for PosiTest AT Adhesion Testers Larger quantity of dollies at a reduced cost. Select from the following multipacks Size Quantity Order Code 10 mm 100 DOLLY10APK100 14 mm 100 DOLLY14APK100 20 mm 100 DOLLY20APK100 50 mm 50 DOLLY50APK50 DeFelsko Conversion Kit AT20KIT for PosiTest Adhesion Testers Order Code: AT20KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) DeFelsko Conversion Kit AT50KIT for PosiTest Adhesion Testers  Order Code: AT50KIT Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies Ideal for lower bond strength finishes such as coatingson wood, concrete and plastic Larger surface area of dolly provides improved low range precision and repeatability Includes 50 mm stand-off, 50 mm hole saw and 50 mm aluminum test dollies (12) DeFelsko Conversion Kit AT50CKIT for PosiTest Adhesion Testers Order Code: AT50CKIT Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials Conforms to ASTM C1583 Includes 50 mm C1583 steel dollies (4), 50 mm diamond grit cutting tool with arbor and 50 mm C1583 stand-off NOTE: Drill required (not included) DeFelsko Conversion Kit AT50TKIT for PosiTest Adhesion Testers Order Code: AT50TKIT Interchangeable standoff allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies Ideal for high bond strength finishes such as coatings on metal Includes 20 mm stand-off, 20 mm hole saw and 20 mm aluminum test dollies (20) Drilling Template for 50 mm Dollies  Order Code: TMPLTAS Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete Includes (10) drill bits 5/32" (4 mm) Glue Kit Order Code: ATADHESIVEKIT ResinLab EP11HT 2-Part Epoxy Additional glue, mixing sticks, palettes and cotton swabs Pelican Case for PosiTest AT Pull-Off Adhesion Testers Order Code: CASEATAB-P Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTest instrument Related Products PosiTest AT-A Automatic Pull Off Adhesion Tester AT-VERIFY Adhesion Tester Accuracy Verification Kit Downloads DeFelsko PosiTest-ATPull-off Adhesion Tester - Full Instruction Manual DeFelsko PosiTest-ATPull-off Adhesion Tester - Literature DeFelsko PosiTest-ATPull-off Adhesion Tester - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-at-adhesion-testers-c-97_10/defelsko-atm50-positest-at-m-manual-pull-off-adhesion-tester-with-50mm-dollies-kit-atm50a-b-p-1692.html Mon, 21 Aug 2023 22:06:46 +0000 USD 1692 DeFelsko 961 PosiTest ATM50A-B https://www.abqindustrial.net/store/images/defelsko-positest-atm50.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200d-c-positector-200-d-probe-only-ultrasonic-coating-thickness-gage-p-1690.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1690 ]]>DeFelsko PRB200D-C Positector PRB200D Probe Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 2 to 300 mils (50 to 7600 μm) Display Sold Separately The DeFelsko PosiTector PRB200D-C non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector PRB200D-C measures thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers. Conforms to ASTM D6132 and ISO 2808 FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products DeFelsko PosiTector 200  Ultrasonic Coating Thickness Gauge Ultrasonic Coating Thickness Gauge for wood, concrete, plastic and more Separate Probe Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko PRB200D-C Positector 200 D Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- 200 D Ordering Guide DeFelsko PRB200D-C Positector 200 D Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Full Instruction Manual DeFelsko PRB200D-C Positector 200 D Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200d-c-positector-200-d-probe-only-ultrasonic-coating-thickness-gage-p-1690.html Fri, 21 Oct 2022 13:18:55 +0000 USD 1690 DeFelsko 984 PRB200D https://www.abqindustrial.net/store/images/PRB200D.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200c-c-positector-200-c-probe-only-ultrasonic-coating-thickness-gage-p-1689.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1689 ]]>DeFelsko PRB200C-C Positector PRB200C Probe Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 2 - 150 mils (50 - 3800 µm) Display Sold Separately The DeFelsko PosiTector PR200C-C probe non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector PRB200C-C model measures coating thickness on concrete, fiberglass, etc. Conforms to ASTM D6132 and ISO 2808 FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products DeFelsko PosiTector 200  Ultrasonic Coating Thickness Gauge Ultrasonic Coating Thickness Gauge for wood, concrete, plastic and more Separate Probe Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko PRB200C-C Positector 200 C Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- 200 C Ordering Guide DeFelsko PRB200C-C Positector 200 C Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Full Instruction Manual DeFelsko PRB200C-C Positector 200 C Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200c-c-positector-200-c-probe-only-ultrasonic-coating-thickness-gage-p-1689.html Fri, 21 Oct 2022 13:18:56 +0000 USD 1689 DeFelsko 980 PRB200C https://www.abqindustrial.net/store/images/PRB200C.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200d3-g-positector-200-d3-advanced-ultrasonic-coating-thickness-gage-p-1688.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1688 ]]>DeFelsko 200D3-G Positector 200 D3 Advanced Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 0.5 - 150 mils (13 - 3800 µm) Separate Probe The DeFelsko PosiTector 200D3-G non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector 200D3-G measures thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers. Advanced models of the PosiTector 200 measure up to 3 layers with graphics. Conforms to ASTM D6132 and ISO 2808 Kit Contents The DeFelsko PosiTector 200 D3 Advanced Ultrasonic Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 200 D Probe PRB200D Couplant (ultrasonic gel) and precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Ready to measure—no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Responsive transducers provide fast, accurate readings Certificate of Calibration showing traceability to NIST or PTB included Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808 Versatile PosiTector body accepts all PosiTector 200, 6000, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage NEW Auto rotating display with Flip Lock Mils/Microns switchable Selectable display languages Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Max Thick Mode displays the deepest ultrasonic echo eliminating the need to adjust the Lo Range—ideal for ignoring unwanted surface echos NEW Screen Capture – save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: Measure the total thickness of a coating system or up to 3 individual layer thicknesses in a multi-layer system. Graphics mode with screen capture for detailed analysis of the coating system NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Full Instruction Manual DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Literature DeFelsko PosiTector Coating Thickness Gages - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200d3-g-positector-200-d3-advanced-ultrasonic-coating-thickness-gage-p-1688.html Fri, 21 Oct 2022 13:18:58 +0000 USD 1688 DeFelsko 975 PosiTector 200D3 https://www.abqindustrial.net/store/images/defelsko-positector-200-d.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200c3-g-positector-200-c3-advanced-ultrasonic-coating-thickness-gage-p-1687.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1687 ]]>DeFelsko 200C3-G Positector 200 C3 Advanced Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 2 - 150 mils (50 - 3800 µm) Separate Probe The DeFelsko PosiTector 200C3-G non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector 200C3-G model measures coating thickness on concrete, fiberglass, etc. Advanced models measure up to 3 layers with graphics. Conforms to ASTM D6132 and ISO 2808 Kit Contents The DeFelsko PosiTector 200 C3 Advanced Ultrasonic Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 200 C Probe PRB200C Couplant (ultrasonic gel) and precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Ready to measure—no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Responsive transducers provide fast, accurate readings Certificate of Calibration showing traceability to NIST or PTB included Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808 Versatile PosiTector body accepts all PosiTector 200, 6000, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage NEW Auto rotating display with Flip Lock Mils/Microns switchable Selectable display languages Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Max Thick Mode displays the deepest ultrasonic echo eliminating the need to adjust the Lo Range—ideal for ignoring unwanted surface echos NEW Screen Capture – save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: Measure the total thickness of a coating system or up to 3 individual layer thicknesses in a multi-layer system. Graphics mode with screen capture for detailed analysis of the coating system NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Full Instruction Manual DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Literature DeFelsko PosiTector Coating Thickness Gages - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200c3-g-positector-200-c3-advanced-ultrasonic-coating-thickness-gage-p-1687.html Fri, 21 Oct 2022 13:18:59 +0000 USD 1687 DeFelsko 973 PosiTector 200C3 https://www.abqindustrial.net/store/images/defelsko-positector-200-c.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200b3-g-positector-200-b3-advanced-ultrasonic-coating-thickness-gage-p-1686.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1686 ]]>DeFelsko 200B3-G Positector 200 B3 Advanced Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 0.5 - 40 mils (13 - 1000 µm) The DeFelsko PosiTector 200B3-G non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector 200B3-G model measures polymer coating on wood, plastic, etc. Advanced models of the PosiTector 200 measure up to 3 layers with graphics. Conforms to ASTM D6132 and ISO 2808 Kit Contents The DeFelsko PosiTector 200 B3 Advanced Ultrasonic Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 200 B Probe PRB200B Couplant (ultrasonic gel) and precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Ready to measure—no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Responsive transducers provide fast, accurate readings Certificate of Calibration showing traceability to NIST or PTB included Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808 Versatile PosiTector body accepts all PosiTector 200, 6000, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage NEW Auto rotating display with Flip Lock Mils/Microns switchable Selectable display languages Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Max Thick Mode displays the deepest ultrasonic echo eliminating the need to adjust the Lo Range—ideal for ignoring unwanted surface echos NEW Screen Capture – save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Advanced Models Features Includes ALL features as shown above plus: Measure the total thickness of a coating system or up to 3 individual layer thicknesses in a multi-layer system. Graphics mode with screen capture for detailed analysis of the coating system NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Full Instruction Manual DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Literature DeFelsko PosiTector Coating Thickness Gages - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200b3-g-positector-200-b3-advanced-ultrasonic-coating-thickness-gage-p-1686.html Fri, 21 Oct 2022 13:19:01 +0000 USD 1686 DeFelsko 958 PosiTector 200B3 https://www.abqindustrial.net/store/images/defelsko-positector-200-b.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200d1-g-positector-200-d1-standard-ultrasonic-coating-thickness-gage-p-1685.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1685 ]]>DeFelsko 200D1-G Positector 200 D1 Standard Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 2 - 300 mils (50 - 7600 µm) The DeFelsko PosiTector 200D1-G non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector 200D1-G measures thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers. Conforms to ASTM D6132 and ISO 2808 Kit Contents The DeFelsko PosiTector 200 D1 Standard Ultrasonic Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 200 D Probe PRB200D Couplant (ultrasonic gel) and precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Ready to measure—no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Responsive transducers provide fast, accurate readings Certificate of Calibration showing traceability to NIST or PTB included Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808 Versatile PosiTector body accepts all PosiTector 200, 6000, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage NEW Auto rotating display with Flip Lock Mils/Microns switchable Selectable display languages Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Max Thick Mode displays the deepest ultrasonic echo eliminating the need to adjust the Lo Range—ideal for ignoring unwanted surface echos NEW Screen Capture – save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Full Instruction Manual DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Literature DeFelsko PosiTector Coating Thickness Gages - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200d1-g-positector-200-d1-standard-ultrasonic-coating-thickness-gage-p-1685.html Wed, 19 Oct 2022 19:46:59 +0000 USD 1685 DeFelsko 991 PosiTector 200D1 https://www.abqindustrial.net/store/images/defelsko-positector-200-d.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200c1-g-positector-200-c1-standard-ultrasonic-coating-thickness-gage-p-1684.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1684 ]]>DeFelsko 200C1-G Positector 200 C1 Standard Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 2 - 150 mils (50 - 3800 µm) Separate Probe The DeFelsko PosiTector 200C1-G non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector 200C1-G model measures coating thickness on concrete, fiberglass, etc. Kit Contents The DeFelsko PosiTector 200 C1 Standard Ultrasonic Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 200 C Probe PRB200C Couplant (ultrasonic gel) and precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Ready to measure—no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Responsive transducers provide fast, accurate readings Certificate of Calibration showing traceability to NIST or PTB included Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808 Versatile PosiTector body accepts all PosiTector 200, 6000, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, hardness tester, or ultrasonic wall thickness gage NEW Auto rotating display with Flip Lock Mils/Microns switchable Selectable display languages Powerful Statistics mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring Max Thick Mode displays the deepest ultrasonic echo eliminating the need to adjust the Lo Range—ideal for ignoring unwanted surface echos NEW Screen Capture – save 100 screen images for record keeping and review NEW up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Full Instruction Manual DeFelsko 200 Positector Coating Thickness Gages for Non-Metal Substrates - Literature DeFelsko PosiTector Coating Thickness Gages - Online Instructions Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-200c1-g-positector-200-c1-standard-ultrasonic-coating-thickness-gage-p-1684.html Wed, 19 Oct 2022 19:47:03 +0000 USD 1684 DeFelsko 966 PosiTector 200C1 https://www.abqindustrial.net/store/images/defelsko-positector-200-c.jpg https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-2pro-professional-single-purpose-hi-lo-welding-gauge-gal-2pro-p-1683.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1683 ]]>G.A.L. Gage Co. Cat # 2Pro Professional Single Purpose HI-LO Welding Gauge GAL-2Pro G.A.L. Gage Co. Cat # 2Pro Professional Single Purpose HI-LO Welding Gauge GAL-2Pro - Made in USA Features Measurement Scale: Inch or Metric Root Weld Space Eliminates Rejects - Improves Productivity Internal Misalignment Downloads G.A.L. Gage Co. Cat # 2Pro Professional Single Purpose HI-LO Welding Gauge GAL-2Pro - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/industrial-maintenance-c-102/g-a-l-gage-co-weld-measuring-c-102_91/g-a-l-gage-co-cat-2pro-professional-single-purpose-hi-lo-welding-gauge-gal-2pro-p-1683.html Tue, 22 Feb 2022 21:38:49 +0000 USD 1683 G.A.L. Gage Co. 961 GAL-2 https://www.abqindustrial.net/store/images/SinglePurposeHiLo_GAL-CAT02.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmd3-g-positector-dpmd3-advanced-dew-point-meter-with-prbdpmd-c-cabled-probe-p-1682.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1682 ]]>DeFelsko DPMD3-G Positector DPMD3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMD-C Cabled Probe with 1/2" NPT Threads. The DeFelsko DPMD3-G Positector DPMD3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMD-C Cabled Probe with 1/2" NPT Threads measures and records climatic parameters including: Air temperature, relative humidity and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMD3 Advanced Dew Point Meters Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector DPMS3 Probe PRBDPMD Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 datasets in up to 1,000 batches Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly intervals. User defined limits for all parameters—visible and audible warnings. Receive email alerts when connected to WiFi. Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Wet bulb temperature can be displayed and recorded WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmd3-g-positector-dpmd3-advanced-dew-point-meter-with-prbdpmd-c-cabled-probe-p-1682.html Fri, 21 Oct 2022 14:13:35 +0000 USD 1682 DeFelsko 978 PosiTector DPMD3 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-d.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpma3-g-positector-dpma3-advanced-dew-point-meter-with-prbdpma-c-integral-probe-p-1681.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1681 ]]>DeFelsko DPMA3-G PosiTector DPMA3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMA-C Integral Probe with Wind Speed Sensor. Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPMA3-G PosiTector DPMA3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMA-C Integral Probe with Wind Speed Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, wind speed, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMA3 Advanced Dew Point Meters Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector DPMS3 Probe PRBDPMA Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 datasets in up to 1,000 batches Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly intervals. User defined limits for all parameters—visible and audible warnings. Receive email alerts when connected to WiFi. Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Wet bulb temperature can be displayed and recorded WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpma3-g-positector-dpma3-advanced-dew-point-meter-with-prbdpma-c-integral-probe-p-1681.html Fri, 21 Oct 2022 14:13:34 +0000 USD 1681 DeFelsko 1000 PosiTector DPMA3 https://www.abqindustrial.net/store/images/products/defelsko-positector-dpm-a.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpms3-g-positector-dpms3-advanced-dew-point-meter-with-prbdpms-c-cabled-probe-p-1680.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1680 ]]>DeFelsko DPMS3-G PosiTector DPMS3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMS-C Cabled Probe with Surface Temperature Sensor. Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPMS3-G PosiTector DPMS3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMS-C Cabled Probe with Surface Temperature Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMS3 Advanced Dew Point Meters Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector DPMS3 Probe PRBDPMS Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Hard shell carrying caseand instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 datasets in up to 1,000 batches Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly intervals. User defined limits for all parameters—visible and audible warnings. Receive email alerts when connected to WiFi. Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Wet bulb temperature can be displayed and recorded WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared SurfaceTemperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpms3-g-positector-dpms3-advanced-dew-point-meter-with-prbdpms-c-cabled-probe-p-1680.html Fri, 21 Oct 2022 14:13:34 +0000 USD 1680 DeFelsko 994 PosiTector DPMS3 https://www.abqindustrial.net/store/images/products/defelsko-positector-dpm-s.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmir3-g-positector-dpmir3-advanced-dew-point-meter-with-prbdpmir-c-integral-probe-p-1679.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1679 ]]>DeFelsko DPMIR3-G Positector DPMIR3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMIR-C Integral Probe with Infrared Surface Temperature Sensor Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPMIR3-G Positector DPMIR3 Advanced Dew Point Meter for Environmental Monitoring with PRBDPMIR-C Integral Probe with Infrared Surface Temperature Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPM3 Advanced Dew Point Meters Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV PosiTector DPMR3 Probe PRBDPMIR Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 datasets in up to 1,000 batches Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly intervals. User defined limits for all parameters—visible and audible warnings. Receive email alerts when connected to WiFi. Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Wet bulb temperature can be displayed and recorded WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmir3-g-positector-dpmir3-advanced-dew-point-meter-with-prbdpmir-c-integral-probe-p-1679.html Wed, 09 Nov 2022 17:37:21 +0000 USD 1679 DeFelsko 991 PosiTector DPMIR3 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-ir.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpm3-g-positector-dpm3-advanced-dew-point-meter-with-prbdpm-c-integral-probe-p-1678.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1678 ]]>The DeFelsko DPM3-G PosiTector DPM3 Advanced Dew Point Meters for Environmental Monitoring with PRBDPM-C Integral Probe Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPM3-G PosiTector DPM3 Advanced Dew Point Meters for Environmental Monitoring with PRBDPM-C Integral Probe measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPM3 Advanced Dew Point Meters Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV PosiTector DPM3 Probe PRBDPM Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 datasets in up to 1,000 batches Enhanced Auto Log mode turns the gage off between readings for up to 8 months of battery life. Each reading can be uploaded to PosiSoft.net or an FTP server using WiFi. Automatically group readings into batches at daily, weekly, or monthly intervals. User defined limits for all parameters—visible and audible warnings. Receive email alerts when connected to WiFi. Trend Charts graph readings in real-time NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Wet bulb temperature can be displayed and recorded WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpm3-g-positector-dpm3-advanced-dew-point-meter-with-prbdpm-c-integral-probe-p-1678.html Fri, 21 Oct 2022 14:13:32 +0000 USD 1678 DeFelsko 989 PosiTector DPM3 https://www.abqindustrial.net/store/images/defelsko-positector-dpm.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmd1-g-positector-dpmd1-standard-dew-point-meter-with-prbdpmd-c-cabled-probe-p-1677.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1677 ]]>The DeFelsko DPMD1-G PosiTector DPMD1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMD-C Cabled Probe with 1/2" NPT Threads Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPMD1-G PosiTector DPMD1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMD-C Cabled Probe with 1/2" NPT Threads measures and records climatic parameters including: Air temperature, relative humidity and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMD1 Standard Dew Point Meters Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector DPMD1 Probe PRBDPMD Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 2,500 datasets—stored readings can be viewed or downloaded Auto Log mode runs unattended on batteries for up to 60 hours or continuously via USB Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmd1-g-positector-dpmd1-standard-dew-point-meter-with-prbdpmd-c-cabled-probe-p-1677.html Tue, 18 Oct 2022 14:54:58 +0000 USD 1677 DeFelsko 841 PosiTector DPMD1 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-d.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpma1-g-positector-dpma1-standard-dew-point-meter-with-prbdpma-c-integral-probe-p-1676.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1676 ]]>DeFelsko DPMA1-G PosiTector DPMA1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMA-C Integral Probe with Wind Speed Sensor Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes DeFelsko DPMA1-G PosiTector DPMA1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMA-C Integral Probe with Wind Speed Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, wind speed, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMA1 Standard Dew Point Meters Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector DPMS1 Probe PRBDPMA Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 2,500 datasets—stored readings can be viewed or downloaded Auto Log mode runs unattended on batteries for up to 60 hours or continuously via USB Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpma1-g-positector-dpma1-standard-dew-point-meter-with-prbdpma-c-integral-probe-p-1676.html Tue, 18 Oct 2022 14:54:57 +0000 USD 1676 DeFelsko 981 PosiTector DPMA1 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-a.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpms1-g-positector-dpms1-standard-dew-point-meter-with-prbdpms-c-cabled-probe-p-1675.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1675 ]]>DeFelsko DPMS1-G PosiTector DPMS1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMS-C Cabled Probe with Surface Temperature Sensor Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes The DeFelsko DPMS1-G PosiTector DPMS1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMS-C Cabled Probe with Surface Temperature Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMS1 Standard Dew Point Meters Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector DPMS1 Probe PRBDPMS Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Hard shell carrying caseand instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 2,500 datasets—stored readings can be viewed or downloaded Auto Log mode runs unattended on batteries for up to 60 hours or continuously via USB Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F *DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpms1-g-positector-dpms1-standard-dew-point-meter-with-prbdpms-c-cabled-probe-p-1675.html Tue, 18 Oct 2022 14:54:56 +0000 USD 1675 DeFelsko 993 PosiTector DPMS1 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-s.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmir1-g-positector-dpmir1-standard-dew-point-meter-with-prbdpmir-c-integral-probe-p-1674.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1674 ]]>DeFelsko DPMIR1-G PosiTector DPMIR1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMIR-C Integral Probe with Infrared Surface Temperature Sensor Universal body accepts all PosiTector SPG, DPM, UTG and 6000 probes >p>The DeFelsko DPMIR1-G PosiTector DPMIR1 Standard Dew Point Meter for Environmental Monitoring with PRBDPMIR-C Integral Probe with Infrared Surface Temperature Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Conforms to ISO 8502-4, BS 7079-B4, ASTM D3276, IMO PSPC, SSPC-PA7 and US Navy NSI 009-32 Kit Contents The DeFelsko PosiTector DPMIR1 Standard Dew Point Meters Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector DPMIR1 Probe PRBDPMIR Temperature Sensors Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple All readings are constantly updated and displayed simultaneously Alarms indicate when climate conditions are unsuitable for painting NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button No need to consult complex tables or use a slide rule calculator Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Fast response precision sensors provide accurate, repeatable readings SmartTrend™ Indicators identify rising, falling, or stable readings Certificate of Calibration included showing traceability to NIST Conforms to national and international standards including ISO and ASTM Powerful NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for viewing and reporting data Software Updates via web keep your gage current Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 2,500 datasets—stored readings can be viewed or downloaded Auto Log mode runs unattended on batteries for up to 60 hours or continuously via USB Specifications Specifications Range Accuracy Resolution Surface Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C 80˚ to 190˚ C ± 1.5˚ C 0.1˚ F –40˚ to 175˚ F ± 1˚ F 0.1˚ C 175˚ to 375˚ F ± 3˚ F 0.1˚ F Infrared Surface Temperature* –70˚ to 380˚ C ± 1˚C + 1%** 0.1˚ C –94˚ to 716˚ F 0.1˚ F Air Temperature –40˚ to 80˚ C ± 0.5˚ C 0.1˚ C –40˚ to 175˚ F ± 1˚ F 0.1˚ F Humidity 0 to 100% ± 3% 0.1% Wind Speed† 0 to 20 m/s ± 3% Full Scal 0.1 m/s 0 to 44 mph 0.1 mph Dew Point –60˚ to 80˚ C ± 3˚ C‡ 0.1˚ C –76˚ to 175˚ F ± 5.4˚ F‡ 0.1˚ F * DPM IR models only ** At 23˚ C ambient † DPM A models only ‡dependent on RH. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Instruction Manual DeFelsko PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-dpmir1-g-positector-dpmir1-standard-dew-point-meter-with-prbdpmir-c-integral-probe-p-1674.html Wed, 09 Nov 2022 17:37:26 +0000 USD 1674 DeFelsko 989 PosiTector DPMIR1 https://www.abqindustrial.net/store/images/defelsko-positector-dpm-ir.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpmd-c-positector-prbdpmd-dew-point-meter-cabled-probe-with-1-2-inch-npt-threads-p-1673.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1673 ]]>The DeFelsko PRBDPMD-C Cabled Probe Only with 1/2" NPT Threads measures and records climatic parameters including: Air temperature, relative humidity and dew point temperatures. Gage Body Sold Separately Includes built-in air temperature/humidity sensor and thermocouple surface temperature sensor. A surface temperature thermocouple is located on the tip of the silver probe (built-in probe model). It is spring loaded and designed to quickly self-align on a surface. Press it against a surface and allow a few seconds for the value to stabilze. Do not drag the sensor over the surface, Wet the surface for a faster response. Cover with the included protective plastic cap when not in use. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector DPM Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Quick Guide DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Full Guide DeFelsko PosiTector DPM Dew Point Meter - Ordering Guide Probe Only PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpmd-c-positector-prbdpmd-dew-point-meter-cabled-probe-with-1-2-inch-npt-threads-p-1673.html Tue, 18 Oct 2022 14:55:06 +0000 USD 1673 DeFelsko 980 PRBDPMD https://www.abqindustrial.net/store/images/DeFelsko-PRBDPMD-C-PosiTector-PRBDPMD-Dew-Point-Meter.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpmir-c-positector-dew-point-meter-probe-only-infrared-surface-temperature-sensor-p-1672.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1672 ]]>DeFelsko PRBDPMIR-C PosiTector PRBDPMIR Dew Point Meter Integral Probe Only with Infrared Surface Temperature Sensor Gage Body Sold Separately The DeFelsko PRBDPMIR-C Integral Probe Only with Infrared Surface Temperature Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures. Includes built-in air temperature/humidity sensor and thermocouple surface temperature sensor. A surface temperature thermocouple is located on the tip of the silver probe (built-in probe model). It is spring loaded and designed to quickly self-align on a surface. Press it against a surface and allow a few seconds for the value to stabilze. Do not drag the sensor over the surface, Wet the surface for a faster response. Cover with the included protective plastic cap when not in use. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Quick Guide DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Full Guide DeFelsko PosiTector DPM Dew Point Meter - Ordering Guide Probe Only PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpmir-c-positector-dew-point-meter-probe-only-infrared-surface-temperature-sensor-p-1672.html Wed, 09 Nov 2022 17:37:55 +0000 USD 1672 DeFelsko 981 PRBDPMIR https://www.abqindustrial.net/store/images/DeFelsko-PRBDPMIR-C-PosiTector-PRBDPMIR-Dew-Point-Meter.jpg https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpma-c-positector-prbdpma-dew-point-meter-integral-probe-with-wind-speed-sensor-p-1671.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1671 ]]>The DeFelsko PRBDPMA-C Integral Probe Only with Wind Speed Sensor measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, wind speed, dew point temperature and difference between surface and dew point temperatures. Gage Body Sold Separately Includes built-in air temperature/humidity sensor and thermocouple surface temperature sensor. A surface temperature thermocouple is located on the tip of the silver probe (built-in probe model). It is spring loaded and designed to quickly self-align on a surface. Press it against a surface and allow a few seconds for the value to stabilize. Do not drag the sensor over the surface, Wet the surface for a faster response. Cover with the included protective plastic cap when not in use. PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector DPM Frequently Asked Questions Downloads DeFelsko PosiTector DPM Dew Point Meter - Quick Guide DeFelsko PosiTector DPM Dew Point Meter - Literature DeFelsko PosiTector DPM Dew Point Meter - Full Guide DeFelsko PosiTector DPM Dew Point Meter - Ordering Guide Probe Only PosiTector DPM Dew Point Meter - Online Instructions Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/temperature-humidity-measurement-c-103/defelsko-positector-dpm-c-103_18/defelsko-prbdpma-c-positector-prbdpma-dew-point-meter-integral-probe-with-wind-speed-sensor-p-1671.html Tue, 18 Oct 2022 14:55:05 +0000 USD 1671 DeFelsko 989 PRBDPMA https://www.abqindustrial.net/store/images/DeFelsko-PRBDPMA-C-PosiTector-PRBDPMA-Dew-Point-Meter.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgcx-c-positector-utg-cx-probe-only-ultrasonic-thickness-gage-p-1670.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1670 ]]>DeFelsko PRBUTGCX-C PosiTector UTG CX Xtreme Corrosion Probe Ultrasonic Thickness Gage (Gage not Included), 5 MHz Dual Element Gage Sold Separately Measuring Range: 0.040" - 5.000" (1.00 - 125 mm) The DeFelsko PRBUTGCX-C Positector UTG CX Xtreme Corrosion Probe Ultrasonic Thickness Gage easures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgcx-c-positector-utg-cx-probe-only-ultrasonic-thickness-gage-p-1670.html Tue, 18 Oct 2022 14:58:42 +0000 USD 1670 DeFelsko 987 PRBUTGCX https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGCX-C-Positector-PRBUTGCX-Probe-Ultrasonic.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgm-c-positector-utg-m-probe-only-ultrasonic-thickness-gage-p-1669.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1669 ]]>DeFelsko PRBUTGM-C PosiTector UTG M Multiple Echo Probe Ultrasonic Thickness Gage, 5 MHz Contact Gage Sold Separately Measuring Range Multiplo Echo: 0.100" to 2.500" (2.50 to 60.00 mm) Thru-Paint Capability (Multiple Echo): Measures the metal thickness of a painted structure without having to remove the coating. The DeFelsko PRBUTGM-C Positector UTG M Multiple Echo Probe Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgm-c-positector-utg-m-probe-only-ultrasonic-thickness-gage-p-1669.html Fri, 21 Oct 2022 14:08:41 +0000 USD 1669 DeFelsko 985 PRBUTGM https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGM-C-Positector-PRBUTGM--Probe-Ultrasonic.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgm3-g-positector-utg-m3-advanced-ultrasonic-thickness-gage-with-multiple-echo-probe-p-1668.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1668 ]]>DeFelsko UTGM3-G PosiTector UTG M3 Advanced Ultrasonic Thickness Gage with PRBUTGM-C Multiple Echo Probe, 5 MHz Contact Measuring Range Multiplo Echo: 0.100" to 2.500" (2.50 to 60.00 mm) Thru-Paint Capability (Multiple Echo): Measures the metal thickness of a painted structure without having to remove the coating. The DeFelsko UTGM3-G Positector UTG M3 Advanced Ultrasonic Thickness Gage with PRBUTGM-C Multiple Echo Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG M3 Advaned Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG M Probe PRBUTGM Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgm3-g-positector-utg-m3-advanced-ultrasonic-thickness-gage-with-multiple-echo-probe-p-1668.html Fri, 21 Oct 2022 14:07:42 +0000 USD 1668 DeFelsko 977 UTGM3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-m.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgcx3-g-positector-utg-cx3-advanced-ultrasonic-thickness-gage-with-xtreme-corrosion-probe-p-1667.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1667 ]]>DeFelsko UTGCX3-G PosiTector UTG CX3 Standard Ultrasonic Thickness Gage with PRBUTGCX-C Xtreme Corrosion Probe, 5 MHz Dual Element Measuring Range: 0.040" - 5.000" (1.00 - 125 mm) The DeFelsko UTGCX3-G Positector UTG CX3 Advanced Ultrasonic Thickness Gage with PRBUTGCX-C Xtreme Corrosion Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CX3 Advaned Ultrasonic Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG CX Probe PRBUTGCX Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgcx3-g-positector-utg-cx3-advanced-ultrasonic-thickness-gage-with-xtreme-corrosion-probe-p-1667.html Tue, 20 Jun 2023 23:18:04 +0000 USD 1667 DeFelsko 993 UTGCX3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-cx.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgm1-g-positector-utg-m1-standard-ultrasonic-thickness-gage-with-multiple-echo-probe-p-1666.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1666 ]]>DeFelsko UTGM1-G PosiTector UTG M1 Standard Ultrasonic Thickness Gage with PRBUTGM-C Multiple Echo Probe, 5 MHz Contact Measuring Range Multiplo Echo: 0.100" to 2.500" (2.50 to 60.00 mm) Thru-Paint Capability (Multiple Echo): Measures the metal thickness of a painted structure without having to remove the coating. The DeFelsko UTGM1-G PosiTector UTG M1 Standard Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG M1 Standard Ultrasonic Thickness Gage Kit includes everything needed for testing:: PosiTector Standard Gage Body BDYSTD-G PosiTector UTG M Probe PRBUTGM Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgm1-g-positector-utg-m1-standard-ultrasonic-thickness-gage-with-multiple-echo-probe-p-1666.html Fri, 21 Oct 2022 14:07:48 +0000 USD 1666 DeFelsko 936 UTGM1 https://www.abqindustrial.net/store/images/defelsko-positector-utg-m.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgcx1-g-positector-utg-cx1-standard-ultrasonic-thickness-gage-with-xtreme-corrosion-probe-p-1665.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1665 ]]>DeFelsko UTGCX1-G PosiTector UTG CX1 Standard Ultrasonic Thickness Gage with PRBUTGCX-C Xtreme Corrosion Probe, 5 MHz Dual Element Measuring Range: 0.040" - 5.000" (1.00 - 125 mm) The DeFelsko UTGCX1-G PosiTector UTG CX1 Standard Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG CX1 Standard Ultrasonic Thickness Gage Kit includes everything needed for testing:: PosiTector Standard Gage Body BDYSTD-G PosiTector UTG CX Probe PRBUTGCX Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Standard Models Features Includes ALL features as shown above plus: NEW Storage of 1,000 readings per probe-stored readings can be viewed or downloaded PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgcx1-g-positector-utg-cx1-standard-ultrasonic-thickness-gage-with-xtreme-corrosion-probe-p-1665.html Wed, 23 Nov 2022 05:22:52 +0000 USD 1665 DeFelsko 998 UTGCX1 https://www.abqindustrial.net/store/images/defelsko-positector-utg-cx.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nks3-g-positector-6000-nks3-advanced-non-ferrous-coating-thickness-gage-p-1662.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1662 ]]>DeFelsko NKS3-G PosiTector 6000 NKS3 Advanced Non-Ferrous Coating Thickness Gauge with cabled probe for extra thick protective paint and coatings, epoxy, rubber, in-tumescent fire proofing and more Model: NKS3-G with Advanced Body Substrate: Non-Ferrous Metals Measuring Range:0 - 500 mils (0 - 13 mm) The DeFelsko NKS3-G PosiTector 6000 NKS3 Advanced Coating Thickness Gage is a versatile, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles.  The NKS3 features a high-range cabled probe ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko PosiTector 6000 NKS3 Advanced Coating Thickness Gauge features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 NKS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBNKS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 500 mils 0 - 13 mm *Accuracy: ± (1 mils + 3%) ± (0.02 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages -NKS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nks3-g-positector-6000-nks3-advanced-non-ferrous-coating-thickness-gage-p-1662.html Fri, 21 Oct 2022 13:44:26 +0000 USD 1662 DeFelsko 1000 NKS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-nks3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fks3-g-positector-6000-fks3-advanced-ferrous-coating-thickness-gage-p-1661.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1661 ]]>DeFelsko FKS3-G PosiTector 6000 FKS3 Advanced Ferrous Coating Thickness Gage with cabled probe for extra thick protective paint and coatings, epoxy, rubber, in-tumescent fire proofing and more Model: FKS3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Ferrous Metals Range: 0 - 500 mils (0 - 13 mm) The DeFelsko FKS3-G PosiTector 6000 FKS3 Ferrous Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The FKS3 features a high-range cabled probe ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko PosiTector 6000 FKS3 Advanced Body features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FKS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFKS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 500 mils 0 - 13 mm Accuracy: ± (1 mils + 3%) ± (0.02 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FKS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fks3-g-positector-6000-fks3-advanced-ferrous-coating-thickness-gage-p-1661.html Fri, 21 Oct 2022 13:38:26 +0000 USD 1661 DeFelsko 976 FKS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fks3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nks1-g-positector-6000-nks1-standard-non-ferrous-coating-thickness-gage-p-1660.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1660 ]]>DeFelsko NKS1-G Positector 6000 NKS1 Standard Non-Ferrous Coating Thickness Gauge with separate probe for extra thick protective paint and coatings; epoxy, rubber, intumescent fire proofing and more Model: NKS1 with Standard Body Substrate: Non-Ferrous Metals Range:0 - 500 mils (0 - 13 mm) The DeFelsko NKS1-G Positector 6000 NKS1 Standard Coating Thickness Gage is a versatile, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The NKS1 features a high-range cabled probe ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko Positector 6000 NKS1 Standard Non-Ferrous Coating Thickness Gage features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 NKS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBNKS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 500 mils 0 - 13 mm *Accuracy: ± (1 mils + 3%) ± (0.02 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - NKS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nks1-g-positector-6000-nks1-standard-non-ferrous-coating-thickness-gage-p-1660.html Tue, 18 Oct 2022 14:26:12 +0000 USD 1660 DeFelsko 999 NKS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-nks1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fks1-g-positector-6000-fks1-standard-ferrous-coating-thickness-gage-p-1659.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1659 ]]>DeFelsko FKS1-G Positector 6000 FKS1 Standard Ferrous Coating Thickness Gauges with cabled probe for extra thick protective paint and coatings; epoxy, rubber, intumescent fire proofing and more Model: FKS1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Ferrous Metals Range: 0 - 500 mils (0 - 13 mm) The DeFelsko FKS1-G Positector 6000 FKS1 Standard Coating Thickness Gauges is a precise, rugged tester designed to measure coating thickness on Ferrous accurately and quickly using magnetic induction principles. The FKS1 features a high-range cabled probe ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more. The DeFelsko FKS1-G Positector 6000 modelo1 Standard Ferrous Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FKS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFKS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 500 mils 0 - 13 mm Accuracy: ± (1 mils + 3%) ± (0.02 mm + 3%) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FKS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fks1-g-positector-6000-fks1-standard-ferrous-coating-thickness-gage-p-1659.html Tue, 18 Oct 2022 14:21:51 +0000 USD 1659 DeFelsko 925 FKS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fks1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n90s3-g-positector-6000-n90s3-advanced-non-ferrous-coating-thickness-gage-p-1658.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1658 ]]>DeFelsko N90S3-G PosiTector 6000 N90S3 Advanced Non-Ferrous Coating Thickness Gauges with separate 90 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N90S3 with Advanced Body Substrate: Non-Ferrous Metals Range: 0-25 mils (0-625 µm) The DeFelsko N90S3-G PosiTector 6000 N90S3 Advanced Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous and or non-ferrous metals accurately and quickly using eddy current principles.  The N90S3 features a right angle probe for measuring within areas of low headroom. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N90S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko N90S3-G PosiTector 6000 N90S3 Advanced Non-Ferrous Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000N90S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBN90S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 25 mils 0 - 625 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages -N90S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n90s3-g-positector-6000-n90s3-advanced-non-ferrous-coating-thickness-gage-p-1658.html Fri, 21 Oct 2022 13:44:28 +0000 USD 1658 DeFelsko 997 N90S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n90s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90s3-g-positector-6000-f90s3-advanced-ferrous-coating-thickness-gage-p-1657.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1657 ]]>DeFelsko F90S3-G PosiTector 6000 F90S3 Advanced Ferrous Coating Thickness Gauges with separate 90 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F90S3 with Advanced Body Range: 0-45 mils (0-1150 µm) DeFelsko F90S3-G PosiTector 6000 F90S3 Advanced Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The F90S3 features a right angle probe for measuring within areas of low headroom. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 F90S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko F90S3-G PosiTector 6000 F90S3 Advanced Coating Thickness Gauge has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 F90S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBF90S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - F90S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90s3-g-positector-6000-f90s3-advanced-ferrous-coating-thickness-gage-p-1657.html Fri, 21 Oct 2022 13:33:41 +0000 USD 1657 DeFelsko 998 F90S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f90s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n90s1-g-positector-6000-n90s1-standard-non-ferrous-coating-thickness-gage-p-1656.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1656 ]]>DeFelsko N90S1-G Positector 6000 N90S1 Standard Non-Ferrous Coating Thickness Gauges with separate 90 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N90S1 with Standard (1) Body Substrate: Non-Ferrous Metals Measuring Range: 0-25 mils (0-625 µm) The DeFelsko N90S1-G Positector 6000 N90S1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles.  The N90S1 features a right angle probe for measuring within areas of low headroom. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N90S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko N90S1-G Positector 6000 N90S1 Standard Coating Thickness Gauges features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 N90S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBN90S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 25 mils 0 - 625 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N90S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n90s1-g-positector-6000-n90s1-standard-non-ferrous-coating-thickness-gage-p-1656.html Fri, 21 Oct 2022 13:44:30 +0000 USD 1656 DeFelsko 999 N90S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n90s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90s1-g-positector-6000-f90s1-standard-ferrous-coating-thickness-gage-p-1655.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1655 ]]>DeFelsko F90S1-G Positector 6000 F90S1 Standard Ferrous Coating Thickness Gauges with separate 90 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F90S1 with Standard (1) Body Range: 0-45 mils (0-1150 µm) The DeFelsko F90S1-G Positector 6000 F90S1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on Ferrous metals accurately and quickly using magnetic induction principles. The F90S1 features a right angle probe for measuring within areas of low headroom. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 F90S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko F90S1-G Positector 6000 F90S1 Standard Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 F90S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBF90S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - F90S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f90s1-g-positector-6000-f90s1-standard-ferrous-coating-thickness-gage-p-1655.html Fri, 21 Oct 2022 13:33:40 +0000 USD 1655 DeFelsko 995 F90S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f90s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n45s3-g-positector-6000-n45s3-advanced-non-ferrous-coating-thickness-gage-p-1654.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1654 ]]>Price: $ 1,375.00 DeFelsko N45S3-G PosiTector 6000 N45S3 Advanced Non-Ferrous Coating Thickness Gauges with cabled 45 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N45S3-E with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Non-Ferrous Metals Ranges: 0 - 25 mils (0 - 625 µm) The DeFelsko N45S3-G PosiTector 6000 N45S3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles.  With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N45S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko PosiTector 6000 N45S3 Advanced Non-Ferrous Coating Thickness Gauges features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 N45S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBN45S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 25 mils 0 - 625 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N45S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n45s3-g-positector-6000-n45s3-advanced-non-ferrous-coating-thickness-gage-p-1654.html Fri, 21 Oct 2022 13:44:32 +0000 USD 1654 DeFelsko 1000 N45S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n45s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f45s3-g-positector-6000-f45s3-advanced-ferrous-coating-thickness-gage-p-1653.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1653 ]]>DeFelsko F45S3-G PosiTector 6000 F45S3 Advanced Ferrous Coating Thickness Gage with separate 45 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F45S3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Ferrous Metals Range: 0 - 45 mils (0 - 1150 µm) The DeFelsko F45S3-G PosiTector 6000 F45S3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 F45S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko PosiTector 6000 F45S3 Advanced Ferrous Coating Thickness Gage features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 F45S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBF45S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F45S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f45s3-g-positector-6000-f45s3-advanced-ferrous-coating-thickness-gage-p-1653.html Fri, 21 Oct 2022 13:30:25 +0000 USD 1653 DeFelsko 1000 F45S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f45s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n45s1-g-positector-6000-n45s1-standard-non-ferrous-coating-thickness-gage-p-1652.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1652 ]]>DeFelsko N45S1-G Positector 6000 N45S1 Standard Non-Ferrous Coating Thickness Gauges with cabled 45 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N45S1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Non-Ferrous Metals Range: 0 - 25 mils (0 - 625 µm) The DeFelsko N45S1-G Positector 6000 N45S1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness non-ferrous metals accurately and quickly using eddy current principles.  With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N45S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko N45S1-G Positector 6000 N45S1 Standard Coating Thickness Gauges has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 N45S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBN45S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 25 mils 0 - 625 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N45S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n45s1-g-positector-6000-n45s1-standard-non-ferrous-coating-thickness-gage-p-1652.html Fri, 21 Oct 2022 13:44:35 +0000 USD 1652 DeFelsko 999 N45S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n45s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f45s1-g-positector-6000-f45s1-standard-ferrous-coating-thickness-gage-p-1651.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1651 ]]>DeFelsko F45S1-G Positector 6000 F45S1 Standard Ferrous Coating Thickness Gauges with Cabled 45 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F45S1-G with Standard Body Storage: 250 readings per probe - stored readings can be viewed or downloaded Substrate: Ferrous Metals Range: 0 - 45 mils (0 - 1150 µm) The DeFelsko F45S1-G Positector 6000 F45S1 Standard Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 F45S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. The DeFelsko Positector 6000 F45S1 Standard Ferrous Coating Thickness Gage features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 F45S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBF45S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 250 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F45S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f45s1-g-positector-6000-f45s1-standard-ferrous-coating-thickness-gage-p-1651.html Fri, 21 Oct 2022 13:30:28 +0000 USD 1651 DeFelsko 998 F45S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f45s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n0s3-g-positector-6000-n0s3-advanced-non-ferrous-coating-thickness-gage-p-1650.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1650 ]]>DeFelsko N0S3-G PosiTector 6000 N0S3 Advanced Non-Ferrous Coating Thickness Gage with separate 0 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N0S3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Non-Ferrous Metals Range: 0 - 25 mils (0 - 625 µm) The DeFelsko N0S3-G PosiTector 6000 N0S3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N0S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. This straight microprobe has a quick release adapter that makes it a constant pressure probe for alignment on small, flat or curved parts. The adapter is held in place by a spring. If the sleeve is not required, it can be removed by simply pulling it off the probe. The DeFelsko PosiTector 6000 N0S3 Advanced Non-Ferrous Coating Thickness Gage features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 N0S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBN0S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N0S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n0s3-g-positector-6000-n0s3-advanced-non-ferrous-coating-thickness-gage-p-1650.html Fri, 21 Oct 2022 13:44:37 +0000 USD 1650 DeFelsko 997 N0S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n0s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f0s3-g-positector-6000-f0s3-advanced-ferrous-coating-thickness-gage-p-1649.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1649 ]]>DeFelsko F0S3-G PosiTector 6000 F0S3 Advanced Ferrous Coating Thickness Gage with Cabled 0 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F0S3-G with Advanced Body Storage: 100,000 readings in up to 1,000 batches and sub-batches Substrate: Ferrous Metals Range: 0 - 45 mils (0 - 1150 µm) The DeFelsko F0S3-G PosiTector 6000 F0S3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. With a small measuring tip and best thin-film accuracy, the DeFelsko Positector 6000 F0S3 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. This straight microprobe has a quick release adapter that makes it a constant pressure probe for alignment on small, flat or curved parts. The adapter is held in place by a spring. If the sleeve is not required, it can be removed by simply pulling it off the probe. The DeFelsko PosiTector 6000 F0S3 Advanced Coating Thickness Gauges features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 F0S3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBF0S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F0S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f0s3-g-positector-6000-f0s3-advanced-ferrous-coating-thickness-gage-p-1649.html Fri, 21 Oct 2022 13:30:30 +0000 USD 1649 DeFelsko 987 F0S3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f0s3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n0s1-g-positector-6000-n0s1-standard-non-ferrous-coating-thickness-gage-p-1648.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1648 ]]>DeFelsko N0S1-G Positector 6000 N0S1 Standard Non-Ferrous Coating Thickness Gauges with separate 0 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: N0S1-E with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Ferrous Metals Range: 0-25 mils (0-625 µm) The DeFelsko N0S1-G PosiTector 6000 N0S1 Standard Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles.  With a small measuring tip and best thin-film accuracy, the DeFelsko PosiTector 6000 N0S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. This straight microprobe has a quick release adapter that makes it a constant pressure probe for alignment on small, flat or curved parts. The adapter is held in place by a spring. If the sleeve is not required, it can be removed by simply pulling it off the probe. The DeFelsko Positector 6000 N0S1 Standard Non-Ferrous Coating Thickness Gauges features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 N0S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBN0S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N0S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n0s1-g-positector-6000-n0s1-standard-non-ferrous-coating-thickness-gage-p-1648.html Fri, 21 Oct 2022 13:44:39 +0000 USD 1648 DeFelsko 993 N0S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-n0s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f0s1-g-positector-6000-f0s1-standard-ferrous-coating-thickness-gage-p-1647.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1647 ]]>DeFelsko F0S1-G Positector 6000 F0S1 Standard Ferrous Coating Thickness Gage with Cabled 0 degree Micro Probe for measuring thin coatings and small parts in hard-to-reach areas Model: F0S1 with Standard Body Storage: 250 readings per probe - stored readings can be viewed or downloaded Substrate: Ferrous Metals Range: 0-45 mils (0 - 1150 µm) The DeFelsko F0S1-G Positector 6000 F0S1 Standard Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. With a small measuring tip and best thin-film accuracy, the DeFelsko Positector 6000 F0S1 is ideal for measuring on small parts, hard-to-reach areas, or close to edges. This straight microprobe has a quick release adapter that makes it a constant pressure probe for alignment on small, flat or curved parts. The adapter is held in place by a spring. If the sleeve is not required, it can be removed by simply pulling it off the probe. The DeFelsko Positector 6000 F0S1 Standard Ferrous Coating Thickness Gage has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 F0S1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBF0S-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 250 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 45 mils 0 - 1150 μ *Accuracy: ± (0.02 mils + 1%) 0 - 4 mils ± (0.1 mils + 3%) > 4 mils ± (.5 μ + 1%) 0 - 100 μ ± (2 μ + 3%) > 100 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- F0S Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-f0s1-g-positector-6000-f0s1-standard-ferrous-coating-thickness-gage-p-1647.html Fri, 21 Oct 2022 13:30:32 +0000 USD 1647 DeFelsko 995 F0S1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-f0s1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fn3-g-positector-6000-fn3-advanced-all-metals-coating-thickness-gage-p-1646.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1646 ]]>DeFelsko FN3-G PosiTector 6000 FN3 Coating Thickness Gauge Advanced Body with Removable Built-in Ferrous and Non-Ferrous Probe for one hand use on paint and coating applications Model: FN3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: All Metals Range: 0 - 60 mils (1500 µm) The DeFelsko FN3-G PosiTector 6000 FN3 Advanced Coating Thickness Gauges is a precise, rugged tester designed to measure coating thickness on ferrous and non-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The PosiTector 6000 FN3 Integral Probe design offers maximum convenience and simplicity allowing for one-hand use, eliminating the external probe and cable which can be cumbersome in certain applications.  The PosiTector 6000 FN3 advanced body features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FN3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFN-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FN Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fn3-g-positector-6000-fn3-advanced-all-metals-coating-thickness-gage-p-1646.html Fri, 21 Oct 2022 13:38:31 +0000 USD 1646 DeFelsko 991 FN3 https://www.abqindustrial.net/store/images/defelsko-fn3-g-positector-6000-fn3-advanced-all-metals.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n3-g-positector-6000-n3-advanced-non-ferrous-coating-thickness-gage-p-1645.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1645 ]]>DeFelsko N3-G PosiTector 6000 N3 Advanced Coating Thickness Gauges Advanced Body with Removable Built-in Non-Ferrous Probe for one hand use on paint and coating applications Model: N3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko N3-G PosiTector 6000 N3 Advanced Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The DeFelsko PosiTector 6000 N3 Integral Probe design offers maximum convenience and simplicity allowing for one-hand use, eliminating the external probe and cable which can be cumbersome in certain applications.  The DeFelsko PosiTector 6000 N3 Advanced Body features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 N3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBN-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n3-g-positector-6000-n3-advanced-non-ferrous-coating-thickness-gage-p-1645.html Fri, 21 Oct 2022 13:42:15 +0000 USD 1645 DeFelsko 1000 N3 https://www.abqindustrial.net/store/images/defelsko-n3-g-positector-6000-n3-advanced-non-ferrous.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fn1-g-positector-6000-fn1-standard-all-metals-coating-thickness-gage-p-1643.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1643 ]]>DeFelsko FN1-G PosiTector 6000 FN1 Coating Thickness Gauge Standard Body with Removable Built-in Ferrous and Non-Ferrous Probe for one hand use on paint and coating applications Model: FN1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: All Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FN1-G PosiTector 6000 FN1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous and non-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The DeFelsko PosiTector 6000 FN1 Integral Probe design offers maximum convenience and simplicity allowing for one-hand use, eliminating the external probe and cable which can be cumbersome in certain applications. The DeFelsko PosiTector 6000 FN1 features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FN1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFN-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FN Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fn1-g-positector-6000-fn1-standard-all-metals-coating-thickness-gage-p-1643.html Fri, 21 Oct 2022 13:38:30 +0000 USD 1643 DeFelsko 964 FN1 https://www.abqindustrial.net/store/images/defelsko-fn1-e-positector-6000-fn1-standard-all-metals.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n1-g-positector-6000-n1-standard-non-ferrous-coating-thickness-gage-p-1642.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1642 ]]>DeFelsko N1-G Positector 6000 N1 Coating Thickness Gauge Standard Body with Removable Built-in Non-Ferrous Probe for one hand use on paint and coating applications Model: N1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko N1-G Positector 6000 N1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The DeFelsko Positector 6000 N1 Integral Probe design offers maximum convenience and simplicity allowing for one-hand use, eliminating the external probe and cable which can be cumbersome in certain applications. The DeFelsko Positector 6000 N1 has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 N1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBN-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - N Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-n1-g-positector-6000-n1-standard-non-ferrous-coating-thickness-gage-p-1642.html Tue, 18 Oct 2022 14:24:18 +0000 USD 1642 DeFelsko 992 N1 https://www.abqindustrial.net/store/images/defelsko-positector-6000-standard-n1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fns3-g-positector-6000-fns3-advanced-all-metals-coating-thickness-gage-p-1640.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1640 ]]>DeFelsko FNS3-G PosiTector 6000 FNS3 Advanced All Metals Coating Thickness Gage with separate regular probe for general purpose paint and coating applications Model: FNS3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: All Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FNS3-G PosiTector 6000 FNS3 Advanced Coating Thickness Gauges is a precise, rugged tester designed to measure coating thickness on ferrous and non-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The DeFelsko PosiTector 6000 FNS3 features a constant-pressure, stainless steel cabled probe hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko FNS3-G PosiTector 6000 FNS3 Advanced Coating Thickness Gauge features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FNS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFNS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FNS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fns3-g-positector-6000-fns3-advanced-all-metals-coating-thickness-gage-p-1640.html Fri, 21 Oct 2022 13:38:33 +0000 USD 1640 DeFelsko 976 FNS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fns3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ns3-g-positector-6000-ns3-advanced-non-ferrous-coating-thickness-gage-p-1639.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1639 ]]>DeFelsko NS3-G PosiTector 6000 N3 Advanced Coating Thickness Gauges Advanced Body with Removable Built-in Non-Ferrous Probe for one hand use on paint and coating applications Model: NS3-G with Advanced Body Storage: 100,000 readings in up to 1,000 batches and sub-batches Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko NS3-G PosiTector 6000 NS3 Advanced Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles.  The DeFelsko PosiTector 6000 NS3 features a constant-pressure, stainless steel cabled probe hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko NS3-G PosiTector 6000 NS3 Advanced Non-Ferrous Coating Thickness Gauges for general purpose applications has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 NS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBNS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple NEW Faster measurement speed - 60+ readings per minute Ready to measure - no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for use on applications that require greater precision Conforms to national and international standards including ISO and ASTM Versatile Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Uses alkaline or rechargeable batteries (built-in charger) Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Enhanced FAST mode - 90+ readings per minute for quick inspection Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture – record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe NEW Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning NEW Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. Multiple stored calibration adjustments for measuring on a variety of substrate conditions SSPC-PA 2 feature determines if film thickness over a large area conforms to user-specified min/max levels PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings Onscreen Batch Annotation-add notes, change batch names and more with built-in QWERTY keyboard WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - NS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ns3-g-positector-6000-ns3-advanced-non-ferrous-coating-thickness-gage-p-1639.html Fri, 21 Oct 2022 13:42:18 +0000 USD 1639 DeFelsko 998 NS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-ns3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fs3-g-positector-6000-fs3-advanced-ferrous-coating-thickness-gage-p-1638.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1638 ]]>DeFelsko FS3-G PosiTector 6000 FS3 Advanced Ferrous Coating Thickness Gage with Cabled Probe for general purpose paint and coating applications Model: FS3-E with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FS3-G PosiTector 6000 FS3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The DeFelsko PosiTector 6000 FS3 features a constant-pressure, stainless steel cabled probe hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko FS3-G PosiTector 6000 FS3 Advanced Coating Thickness Gauge features a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFS3-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ±(2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fs3-g-positector-6000-fs3-advanced-ferrous-coating-thickness-gage-p-1638.html Thu, 17 Nov 2022 00:40:59 +0000 USD 1638 DeFelsko 990 FS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fs3-g-coating-thickness.jpg.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fns1-g-positector-6000-fns1-standard-all-metals-coating-thickness-gage-p-1637.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1637 ]]>DeFelsko FNS1-G PosiTector 6000 FNS1 Coating Thickness Gage Standard Body with Cabled Ferrous and Non-Ferrous Probe for general purpose paint and coating applications. Model: FNS1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: All Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FNS1-G PosiTector 6000 FNS1 Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous and non-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The DeFelsko PosiTector 6000 FNS1 features a constant-pressure, stainless steel cabled probe hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 FNS1 has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FNS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFNS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FNS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fns1-g-positector-6000-fns1-standard-all-metals-coating-thickness-gage-p-1637.html Fri, 21 Oct 2022 13:38:32 +0000 USD 1637 DeFelsko 937 FNS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fns1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ns1-g-positector-6000-ns1-standard-non-ferrous-coating-thickness-gage-p-1636.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1636 ]]>DeFelsko NS1-GPositector 6000 NS1 Coating Thickness Gauge Standard Body with Cabled Non-Ferrous Probe for general purpose paint and coating applications. Model: NS1 with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko NS1-GPositector 6000 NS1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The DeFelsko PosiTector 6000 NS1 features a constant-pressure, stainless steel cabled probe hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko Positector 6000 NS1 has a large 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 NS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBNS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple NEW Faster measurement speed - 60+ readings per minute Ready to measure - no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for use on applications that require greater precision Conforms to national and international standards including ISO and ASTM Versatile Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Uses alkaline or rechargeable batteries (built-in charger) Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Enhanced FAST mode - 90+ readings per minute for quick inspection Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture – record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - NS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-ns1-g-positector-6000-ns1-standard-non-ferrous-coating-thickness-gage-p-1636.html Tue, 18 Oct 2022 14:24:19 +0000 USD 1636 DeFelsko 997 NS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-ns1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fnrs3-e-positector-6000-fnrs3-advanced-all-metals-coating-thickness-gage-p-1634.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1634 ]]>DeFelsko FNRS3-G PosiTector 6000 FNRS3 Advanced All Metals Coating Thickness Gauge with right angle cabled probe for general purpose paint and coating applications Model: FNRS3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: All Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FNRS3-G PosiTector 6000 FNRS3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous andnon-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The DeFelsko PosiTector 6000 FNRS3 Advanced Coating Thickness Gauge features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FNRS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFNRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advanced Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FNRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fnrs3-e-positector-6000-fnrs3-advanced-all-metals-coating-thickness-gage-p-1634.html Fri, 21 Oct 2022 13:38:34 +0000 USD 1634 DeFelsko 985 FNRS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fnrs-3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nrs3-g-positector-6000-nrs3-advanced-non-ferrous-coating-thickness-gage-p-1633.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1633 ]]>DeFelsko NRS3-G PosiTector 6000 NRS3 Advanced Non-Ferrous Coating Thickness Gauges with separate regular probe for general purpose paint and coating applications Model: NRS3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko NRS3-G PosiTector 6000 NRS3 Advanced Non-Ferrous Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The PosiTector 6000 NRS3 features a right angle probe for measuring within areas of low headroom. This constant-pressure, stainless steel probe is hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 NRS3 Advanced Coating Thickness Gage features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 NRS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBNRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Advaned Model Features NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Prompted Batch Mode-create pre-defined batches with on-screen text and image prompts for each reading 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more Multiple stored calibration adjustments for measuring on a variety of substrate conditions NEW SSPC-PA 2, ISO 19840, and IMO PSPC 90/10 modes help users comply with standards by prompting for min/max specifications, displaying the necessary readings, and automatically calculating statistics with a pass/fail result WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - NRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nrs3-g-positector-6000-nrs3-advanced-non-ferrous-coating-thickness-gage-p-1633.html Fri, 21 Oct 2022 13:42:20 +0000 USD 1633 DeFelsko 1000 NRS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-nrs-3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-frs3-g-positector-6000-frs3-advanced-ferrous-coating-thickness-gage-p-1632.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1632 ]]>DeFelsko FRS3-G PosiTector 6000 FRS3 Advanced Ferrous Coating Thickness Gage with right angle cabled probe for general purpose paint and coating applications Model: FRS3-G with Advanced Body Storage: 250,000 readings in up to 1,000 batches and sub-batches Substrate: Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FRS3-G PosiTector 6000 FRS3 Advanced Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector 6000 FRS3 features a right angle probe for measuring within areas of low headroom. This constant-pressure, stainless steel probe is hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 FRS3 Advanced Ferrous Coating Thickness Gage for general purpose applications features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 250,000 in up to 1000 groups memory reading storage capacity, USB data output, Scan Mode, Real-Time Graphing Bluetooth output and more. Kit Contents The DeFelsko PosiTector 6000 FRS3 Advanced Coating Thickness Gage Kit includes everything needed for testing: PosiTector Advanced Gage Body BDYADV-G PosiTector 6000 Probe PRBFRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple NEW Faster measurement speed - 60+ readings per minute Ready to measure - no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for use on applications that require greater precision Conforms to national and international standards including ISO and ASTM Versatile Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Uses alkaline or rechargeable batteries (built-in charger) Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Enhanced FAST mode - 90+ readings per minute for quick inspection Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture – record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown above plus: Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data 3 Scan Modes - increase measurement speed to 180+ readings per minute Normal - take continuous readings without lifting the probe NEW Statistics - take continuous readings and record average, standard deviation, min/max thickness and number of readings while scanning NEW Limited Count Average - take continuous readings up to a user-specified count. The gage displays and records the average of the readings. Multiple stored calibration adjustments for measuring on a variety of substrate conditions SSPC-PA 2 feature determines if film thickness over a large area conforms to user-specified min/max levels PSPC 90/10 feature determines if a coating system complies with an IMO performance standard for protective coatings Onscreen Batch Annotation-add notes, change batch names and more with built-in QWERTY keyboard WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-frs3-g-positector-6000-frs3-advanced-ferrous-coating-thickness-gage-p-1632.html Fri, 21 Oct 2022 13:30:39 +0000 USD 1632 DeFelsko 997 FRS3 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-frs-3-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fnrs1-g-positector-6000-fnrs1-standard-all-metals-coating-thickness-gage-p-1631.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1631 ]]>DeFelsko FNRS1-G PosiTector 6000 FNRS1 Standard All Metals Coating Thickness Gauge with separate right angle probe for general purpose paint and coating applications Model: FNRS1-G with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: All Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FNRS1-G PosiTector 6000 FNRS1 Standard Coating Thickness Gauge is a precise, rugged tester designed to measure coating thickness on ferrous and non-ferrous metals accurately and quickly using magnetic induction and eddy current principles. The PosiTector 6000 FNRS1 features a right angle probe for measuring within areas of low headroom. This constant-pressure, stainless steel probe is hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 FNRS1 Standard Coating Thickness Gauge features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FNRS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFNRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - FNRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-fnrs1-g-positector-6000-fnrs1-standard-all-metals-coating-thickness-gage-p-1631.html Fri, 21 Oct 2022 13:38:34 +0000 USD 1631 DeFelsko 990 FNRS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-fnrs-1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-frs1-g-positector-6000-frs1-standard-ferrous-coating-thickness-gage-p-1630.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1630 ]]>DeFelsko FRS1-G PosiTector 6000 FRS1 Standard Ferrous Coating Thickness Gage with right angle cabled probe for general purpose paint and coating applications Model: FRS1-G with Standard Body Storage: 1000 readings per probe - stored readings can be viewed or downloaded Substrate: Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko FRS1-G PosiTector 6000 FRS1 Standard Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on ferrous metals accurately and quickly using magnetic induction principles. The PosiTector 6000 FRS1 features a right angle probe for measuring within areas of low headroom. This constant-pressure, stainless steel probe is hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 FRS1 Standard Ferrous Coating Thickness Gagefeatures a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 FRS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBFRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple NEW Faster measurement speed - 60+ readings per minute Ready to measure - no calibration adjustment required for most applications Enhanced one-handed menu navigation Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Wear-resistant probe tip Shock-absorbing, protective rubber holster with belt clip Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included (Long Form) Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for use on applications that require greater precision Conforms to national and international standards including ISO and ASTM Versatile Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Uses alkaline or rechargeable batteries (built-in charger) Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Enhanced FAST mode - 90+ readings per minute for quick inspection Sealed USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Software Updates via web keep your gage current Screen Capture – record and save image into USB flash memory for record keeping and review Software Solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Standard Model Features Includes ALL features as shown above plus: Storage of 1000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages- FRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages- Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages- Literature DeFelsko PosiTector 6000 Coating Thickness Gages- Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-frs1-g-positector-6000-frs1-standard-ferrous-coating-thickness-gage-p-1630.html Tue, 18 Oct 2022 14:18:03 +0000 USD 1630 DeFelsko 986 FRS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-frs-1-g-coating-thickness.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nrs1-g-positector-6000-nrs1-standard-non-ferrous-coating-thickness-gage-p-1629.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1629 ]]>DeFelsko NRS1-G PosiTector 6000 NRS1 Standard Non-Ferrous Coating Thickness Gage with separate right angle cabled probe for general purpose paint and coating applications Model: NRS1 with Standard Body Storage: 1,000 readings per probe - stored readings can be viewed or downloaded Substrate: Non-Ferrous Metals Range: 0 - 60 mils (0 - 1500 µm) The DeFelsko NRS1-G PosiTector 6000 NRS1 Standard Non-Ferrous Coating Thickness Gage is a precise, rugged tester designed to measure coating thickness on non-ferrous metals accurately and quickly using eddy current principles. The PosiTector 6000 NRS1 features a right angle probe for measuring within areas of low headroom. This constant-pressure, stainless steel probe is hermetically sealed to be totally waterproof - ideal for underwater use. The DeFelsko PosiTector 6000 NRS1 Standard Coating Thickness Gage features a NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation, 1,000 in one group memory reading storage capacity and USB data output. Kit Contents The DeFelsko PosiTector 6000 NRS1 Standard Coating Thickness Gage Kit includes everything needed for testing: PosiTector Standard Gage Body BDYSTD-G PosiTector 6000 Probe PRBNRS-D Precision plastic shims Protective rubber holster with belt clip Wrist strap and protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST or PTB Convenient carrying case and instructions Two (2) year warranty Features  Simple Fast measurement speed - 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection. Ready to measure - no adjustment required for most applications NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button Flashing display - ideal in a noisy environment RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant - IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Wear-resistant probe tip Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Certificate of Calibration showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Hi-RES mode increases displayed resolution for precision applications Conforms to national and international standards including ISO and ASTM Versatile PosiTector body accepts all PosiTector 6000, 200, DPM, IRT, RTR, SPG, SST, SHD, BHI, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage, soluble salt tester, ultrasonic wall thickness gage, or hardness tester Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors Selectable display languages NEW Auto rotating display with Flip Lock Extended cables available (up to 75 m/250 ft) for underwater or remote measuring Mils/Microns/mm switchable Powerful Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring NEW Screen Capture - save 100 screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Every stored measurement is date and time stamped Software Updates via web keep your gage current Software Solutions for viewing, analyzing & reporting data Standard Model Features Includes ALL features as shown above plus: Storage of 1,000 readings per probe - stored readings can be viewed or downloaded Specifications Measuring principle magnetic induction principle (Ferrous) eddy-current principle (Non-Ferrous) Display High contrast, reversible color LCD Data Output USB - "1" & "3" Models Bluetooth - "3" Models Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years Calibration Certificate Certificate of Calibration showing traceability to NIST included Probe Specifications Range: 0 - 60 mils 0 - 1500 μ *Accuracy: ± (0.05 mils + 1%) 0 - 2 mils ± (0.1 mils + 1%) > 2 mils ± (1 μ + 1%) 0 - 50 μ ± (2 μ + 1%) > 50 μ PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 6000 Frequently Asked Questions Related Products DeFelsko Certified Coated Metal Plates Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage DeFelsko SMLINK PosiTector SmartLink Wireless Module Wirelessly connect PosiTector probes to smart devices wit the Positector SmartLink Downloads DeFelsko PosiTector 6000 Coating Thickness Gages - NRS Ordering Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Full Instruction Manual DeFelsko PosiTector 6000 Coating Thickness Gages - Literature DeFelsko PosiTector 6000 Coating Thickness Gages - Quick Guide DeFelsko PosiTector 6000 Coating Thickness Gages - Online Instructions Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-6000-c-97_80/defelsko-nrs1-g-positector-6000-nrs1-standard-non-ferrous-coating-thickness-gage-p-1629.html Tue, 18 Oct 2022 14:24:21 +0000 USD 1629 DeFelsko 997 NRS1 https://www.abqindustrial.net/store/images/defelsko-positetor-6000-nrs-1-g-coating-thickness.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgc-c-positector-utg-c-probe-only-ultrasonic-thickness-gage-p-1628.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1628 ]]>DeFelsko PRBUTGC-C PosiTector UTC C Corrosion Probe Ultrasonic Thickness Gage, 5 MHz Dual Element Gage Sold Separately Measuring Range: 0.040" - 5.000" (1.00 - 125 mm) Available in Standard and Thru-Paint(Multiple Echo) models The DeFelsko PRBUTGC-C PosiTector UTG C measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko PosiTector UTGUltrasonic Thickness Gage - Ordering Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage - Full Instruction Manual DeFelsko PosiTector UTGUltrasonic Thickness Gage - Literature DeFelsko PosiTector UTGUltrasonic Thickness Gage - Quick Guide DeFelsko PosiTector UTGUltrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-prbutgc-c-positector-utg-c-probe-only-ultrasonic-thickness-gage-p-1628.html Tue, 18 Oct 2022 14:58:40 +0000 USD 1628 DeFelsko 925 PRBUTGC https://www.abqindustrial.net/store/images/DeFelsko-PRBUTGC-C-Positector-PRBUTGC-Probe-Ultrasoni.jpg https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgc3-g-positector-utg-c3-advanced-ultrasonic-thickness-gage-with-cabled-corrosion-probe-p-1627.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1627 ]]>DeFelsko UTGC3-G PosiTector UTG C3 Advanced Ultrasonic Thickness Gage with PRBUTGC-C Corrosion Probe, 5 MHz Dual Element Measuring Range: 0.040" - 5.000" (1.00 - 125 mm) Available in Advanced and Thru-Paint(Multiple Echo) models The DeFelsko UTGC3-G PosiTector UTG C3 Advanced Ultrasonic Thickness Gage measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating. Kit Contents The DeFelsko PosiTector UTG C3 Advanced Ultrasonic Thickness Gage Kit includes everything needed for testing:: PosiTector Advanced Gage Body BDYADV-G PosiTector UTG C Probe PRBUTGC Couplant (ultrasonic gel) Precision plastic shims Protective rubber holster with belt clip Wrist strap 3 AAA alkaline batteries Protective lens shield PosiSoft Software and USB cable Long Form Certificate of Calibration traceable to NIST Nylon carrying case with shoulder strap and instructions Two (2) year warranty Features Simple Pre-programmed velocities—simply select from a list of common materials or enter your own with ease Smart Couple™ mode eliminates unintentional decoupling—ensure continuous measurements while measuring on scaled or pitted surfaces—ideal for analyzing large areas using multiple passes NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation NEW On-gage help explains menu items at the touch of a button RESET feature instantly restores factory settings Durable NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure NEW Ergonomic design with durable rubberized grip Braided stainless steel cable and heavy-duty strain reliefs for demanding applications (PosiTector UTG CX only) Shock-absorbing, protective rubber holster for added impact resistance Two year warranty on gage body AND probe Accurate Precision ultrasonic transducers provide fast, accurate readings Certificate of Calibration (Long Form) showing traceability to NIST or PTB included Built-in temperature compensation ensures measurement accuracy Conforms to national and international standards including ASTM E797 Versatile PosiTector body accepts all PosiTector probes easily converting from an ultrasonic wall thickness gage to a coating thickness gage, surface profile gage, dew point meter, soluble salt tester, or hardness tester NEW Auto rotating display with Flip Lock Single or two point adjustment Inch/mm switchable Selectable display languages Extended cables available (up to 20 m/60 ft) for underwater or remote measuring Powerful Min Scan mode—take continuous readings and record min/max thicknesses—ideal for quick inspection over a large area Statistics Mode continually displays/updates average, standard deviation, min/max, and number of readings while measuring NEW Screen Capture—save 100 screen images for record keeping and review NEW Instant-on feature quickly powers up the gage if recently powered down NEW Up to 30% longer battery life USB Port for fast, simple connection to a PC and to supply continuous power. USB cable included. PosiSoft USB Drive—stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Includes PosiSoft suite of software for reviewing and reporting data Every stored measurement is date and time stamped Advanced Models Features Includes ALL features as shown above plus: NEW Storage of 250,000 readings in up to 1,000 batches and sub-batches Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more A-Scan with adjustable Gain and screen capture. UTG M and UTG P probes include dual cursors to measure the distance between echoes B-Scan—displays a cross sectional profile of the test material WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector UTGFrequently Asked Questions Downloads DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Instruction Manual DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Literature DeFelsko UTG PosiTector Ultrasonic Thickness Gage - Order Guide DeFelsko PosiTector UTG Ultrasonic Thickness Gage- Online Instruction Manual with Videos DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/defelsko-positector-utg-c-100_111/defelsko-utgc3-g-positector-utg-c3-advanced-ultrasonic-thickness-gage-with-cabled-corrosion-probe-p-1627.html Fri, 21 Oct 2022 14:07:46 +0000 USD 1627 DeFelsko 994 UTGC3 https://www.abqindustrial.net/store/images/defelsko-positector-utg-c.jpg https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-wc-42-european-ac-safety-yoke-p-1625.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1625 ]]>Electric Power Cord and mains plug Activation Switch and Switch Cover Yoke Legs and feet The Western Instruments WC-42 European AC Safety Yoke, complies with safety regulations in different parts of the World. . These models are not used in North America due to the use of lower voltages (nominally 115 Volts), with excellent grounding systems on convenience (“Mains”) outlets.To ensure even greater safety, GFCI’s (Ground Fault Current Interrupters) are installed on Outdoor and in most Industrial Outlets, to further protect workers and the general public. The WC-42 is based on the WC-6, and is supplied from a standard 42 Volt Power Supply (7.5 Amps Minimum), or Western Instruments PD-42 power supply ,with an input Voltage of 230/50. The Switching System of the Western Instruments WC-42 European AC Safety Yoke is designed to handle these higher amperages, with a greater degree of reliability. The electronic module used in the WC-42 is onlyable to operate from an AC power supply, thus DC is not an option. Due to the nature of the intended environment, a confined space, the AC Field provides an ease of use and maximum particle mobility. The 42 Power Supply permits a minimum 4.6kg (10 pound) lift when supplying a low voltage AC current to the WC-42 Yoke. Related Products Portable MPI Yoke Inspection Kits Western Instruments' Yokes are offered in a wide variety of configurations, more than any other manufacturer of Portable Yoke Kits. No matter the need, Western's Kits are offered in Dry Method, Wet Visible Method (Black or White), or Wet Fluorescent Method. The End User simply chooses his Yoke, and his model of Kit, and they arrive in the same custom Carrying Case. Western Instruments W-PPS Portable Inverter Power Supply The W-PPS (W-PPSK) is a Portable Power Supply designed to operate any of Western Instruments’ standard AC or AC/DC Yokes. The W-PPS is equipped with an appropriately sized Battery, Battery Charger, and Inverter which should be used within the parameters in the manual. Accessories for Western Instruments Magnetic Yokes: Western Instruments W-FI Magnetometers Western Instruments W-PT Pull Test Bars Western Instruments SPR-365 UV Inspection Kit Western Instruments W-PB Powder Bulb Western Instruments QQI’s Quantitative Quality Indicators Western Instruments Castrol Strips Flexible Magnetic Flux Indicators Western Instruments W-PG Pie Gauge Western Instruments W-CT Centrifuge Tube Western Instruments W-CC Fluorescent Crack Comparators Western Instruments MTU Test Piece Western Instruments W-KT Ketos Ring Western Instruments WM-Series Permanent Magnet Yokes Downloads Western Instruments Yoke WC-42- Instruction Manual Western Instruments Yoke WC-42- Low Voltage Yokes Western Instruments Yoke WC-42- Trouble Shooting Western Instruments Yoke WC-42- Power Cord Western Instruments Yoke WC-42- Power Cord Trouble Shooting Western Instruments Yoke WC-42- Switch Replacement Western Instruments Yoke WC-42- Measuring Amperage Draw Western Instruments Yoke WC-42- Cleaning Yokes Albuquerque Industrial https://www.abqindustrial.net/store/magnetic-particle-inspection-c-109/magnetic-yokes-c-109_61/western-instruments-wc-42-european-ac-safety-yoke-p-1625.html Thu, 04 Apr 2024 22:31:26 +0000 USD 1625 Western Instruments 1000 WC-42 https://www.abqindustrial.net/store/images/Yoke%20WC-42%20Western%20Instruments.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcdftf-positest-pc-powder-inspection-kit-with-positest-dft-ferrous-p-1624.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1624 ]]>DeFelsko KITPCDFTF PosiTest PC Powder Inspection Kit with PosiTest DFT Ferrous G Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* — ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko KITPCDFTF PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage DeFelsko PosiTest DFT Ferrous Gage Choice of dry film thickness gage Two DeFelsko Powder Combs(models 1 and 4) Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Literature DeFelsko DeFelsko PosiTest PC Non-contact Uncured Powder Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-kitpcdftf-positest-pc-powder-inspection-kit-with-positest-dft-ferrous-p-1624.html Tue, 18 Oct 2022 14:41:42 +0000 USD 1624 DeFelsko 998 KITPCDFTF https://www.abqindustrial.net/store/images/DeFelsko-KITPCDFTF-PosiTest-PC-Powder.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-pc-b-positest-pc-non-contact-uncured-powder-thickness-gage-p-1622.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1622 ]]>DeFelsko PC-B PosiTest PC Non-contact Uncured Powder Thickness Gage Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts *Conforms to ASTM D7378 Non-contact Uncured Powder Thickness Gage Complete solutions for measuring powder coating before and after cure Kit Content The DeFelsko PosiTest PC Uncured Powder Thickness Gage Kit includes everything needed for testing: DeFelsko PosiTest PC Uncured Powder Thickness Gage Flat-head screwdriver Replacement probe screen Protective lens shield 4 AAA batteries PosiSoft Software and USB cable Convenient hard shell case and instructions Two (2) year warranty Features Features Simple Dedicated stand-alone unit is ready to measure right out of the box Up to 4x faster measurement speed* - ideal for moving lines and swinging parts Easy-to-read digital display with a simple, icon based menu Hand-held, battery operated Ergonomic and lightweight No calibration adjustment required for most powders Target Grid simultaneously displays distance to the part and alignment, making measurements easy RESET features instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - ideal for harsh powder coating environments Hard-shell carrying case included Replaceable screen protects the sensor Two year warranty Accurate Improved sensor technology allows easier measurement on small tubes, odd shapes and moving parts Easy 1 and 2 point calibration adjustment options with Cal Reset to improve accuracy on unusual powders or substrates Conforms to ASTM D7378 Versatile No cable to risk disturbing the applied powder Mils/microns switchable High contrast color display Adjustable display brightness for optimal visibility in any environment Toggle sound On and Off Uses alkaline or rechargeable batteries Powerful Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop software Scan Mode continuously takes measurements - ideal for analyzing large areas USB Keyboard Mode emulates keystrokes to easily stream readings to a PC or PLC USB port for fast, simple connection to a PC and to supply continuous power Software updates keep your instrument current Specifications Range* 20 – 100 µm (0.8–4.0 mils) Resolution 1 µm (0.1 mil) Accuracy ±5 µm (±0.2 mil) Measurement Time 1–3 seconds Measurement Distance to Powder 19 mm (0.75 inch) Measurement Area 2 mm (0.08 inch) Size 241 x 64 x 51 mm (9.5" x 2.5" x 2.0") Weight 180 g (6.4 oz.) without batteries * Based on TGIC-Free polyester powder PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTest PC Powder Inspection Kits Frequently Asked Questions Related Products DeFelsko PosiTest DFT Coating Thickness Gage For ALL Metal Substrates Accessories Replacement Probe Screens KITPCSCRN Used to protect the probe transducer (Qty. 2) USB Retention Fixture Includes a USB retaining clip, torx head screwdriver, 3m (10 ft) USB cable, label and instructions. Ideal for applications where the USB cable will stay connected whiletaking measurements. Downloads DeFelsko PC-B PosiTest PC Non-contact Uncured Powder Coating Thickness Gage - Literature DeFelsko PC-B PosiTest PC Non-contact Uncured Powder Coating Thickness Gage - Instruction Manual Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positest-pc-c-97_116/defelsko-pc-b-positest-pc-non-contact-uncured-powder-thickness-gage-p-1622.html Tue, 18 Oct 2022 14:41:41 +0000 USD 1622 DeFelsko 944 PC-B https://www.abqindustrial.net/store/images/DeFelsko-PosiTest-PC-Non-contact-Uncured-Powder.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-1619.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1619 ]]>Compact Torque Actuator Hysteresis brake, electrically adjustable Hysteresis brake, electrically adjustable CTA is an electrically adjustable brake without the need of any external power supply for generating the braking force Features continuous adjustment of the braking force, electromotive adjusted brake torque remains even without external power supply cost-effective actuator for tension control durable, wearless and maintenance-free very smooth running and steady brake moment even at low rotational speeds compact design requires little space torque is independent of rotational speed in a wide range Applications tension controlled unwinding actuating element for tension control simulation of load torques Downloads CTA Compact Torque Actuator - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-1619.html Thu, 13 Jan 2022 16:24:17 +0000 USD 1619 1000 https://www.abqindustrial.net/store/images/CTA.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsr-online-tension-sensor-p-1617.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1617 ]]>Online Tension Sensor Tension sensor with integrated measuring amplifier Stationary electronic tension sensor, single roller system, for mounting at an existing deflection pulley  Large, hardened guide rollers for minimized material deflection with 29.5 mm groove ⌀  Tension meter is available with digital output for data processing with PC Features V-grooved guide rollers, ball-bearing mounted Tension sensor with integrated measuring amplifier Various output signals: analog, digital (optional), current (optional), analog DMS (optional) Many configurations are possible Easy calibration to customized material by operator Tension sensor with mechanical overload protection Wide variety of roller types can be specified Guide rollers 30 or 70 mm ⌀, made of Aluminium or steel In- and outcoming angle β min 20° Rugged aluminium housing Certificate of Compliance with the order 2.1 according EN 10204 is included Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report Specifications Accuracy factory calibration material: ±1 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Temperature drift Less than ±0.05 % full scale/°C Output signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 250 g (approx. 400 g) Available Models Model Resultant Force Capacity (G/KG) Resultant Force Capacity (Newtons) TSR-1000 1000 grams 10 N TSR-2000 2000 grams 20 N TSR-5K 5 Kg 50 N TSR-10K 10 Kg 100 N Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 4000 Hardened steel Code F 4000 Hard-coated aluminium Code FB 4000 Tempered steel Output Signal Standard Output signal: 0 - 1 VDC Click image for more information   Code A2 Output signal: 0 - 10 VDC Click image for more information   Code A3 Output signal: 4 - 20 mA DC Click image for more information   Code A10 Output signal: mV/V for sensors without amplifier Click image for more information   Code 232 Output signal digital: RS 232 analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Click image for more information   Code 232-H Output signal digital: RS 232 analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Please contact us for details Click image for more information Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsr-online-tension-sensor-p-1617.html Thu, 13 Jan 2022 16:29:41 +0000 USD 1617 1000 TSR https://www.abqindustrial.net/store/images/TSR.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsb-narrow-tape-tow-digital-hand-held-tension-meter-p-1616.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1616 ]]>General Purpose Digital Tension Meter 10 Tension ranges available from 5.0 - 200 cN up to 0.6 - 60 daN For use with ribbons, filaments, carbon strands, foils and similar flat materials Stationary electronic tension sensor for measuring tensions of textile ribbons, films, foils, tows, rovings, fiber bunches and more. 10 Tension ranges available from 5.0 - 500 cN up to 0.5 - 50 daN Electronic tension meter for applications in textile and wire industry. Versatile applicable hand-held unit. Kit Contents DTSB - Narrow Tape / Digital Hand-Held Tension Meter Four (4) AA batteries Accumulator AC adapter Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction manual Carrying case Features Dual-flanged outer guide rollers with various widths, from 7 mm to 30 mm (single-flanged rollers optional) For certain tension ranges and materials, it is possible to supply roller widths of 41 mm. Inquire. Large, backlight LCD-display with 3 different displays: numeric, numeric with live load bar, numeric with graph (time-tension) Display automatically rotates in 90° steps (or can be locked in any desired position) Built-in Diameter Compensator System is used to adjust calibration curve for highest accuracy. Diameter is set with wheel and shown on display Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor 4 Seperate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name) Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks User-set Min and Max alarms with indication on LCD if reading is out of limits User-adjustable DAMPING is used to minimize tension fluctuations User-Selectable units of measurement: cN, daN, g, kg, N, lb Setup parameters can be password protected so they are not accidentally changed by the user Re-chargeable Lithium Polymer battery lasts 40 hours (continuous use, approx) Rugged aluminium housing with rubberized handle provides a secure and comfortable grip NIST-Traceable Calibration Certification in optionally availableSpecifications Accuracy For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for factory calibration plus 4 for customized calibrations Measuring units Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected) Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.2 mm Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Display Graphic LCD, Backlit (user-set: on/off/auto) 3 different displays Numeric, Numeric with graph (time-tension), X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping User-adjustable electronic damping (averaging)  calculated by [X-Values OLD + Y-Values NEW] ÷ 9 Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point: less than ± 0.3 % FS* /°C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) Housing material Die-cast aluminium Weight, net (gross) Up to DTS-50K approx. 875 g / 1550 g DTS-60K-V1 approx. 1040 g / 2700 g Ranges Model Range Res Measuring Head Width** Roller Widths (mm) DTSB-500 5.0 - 500 grams or cN 0.1 g or cN 55 mm 7, 10, 15, 20 mm DTSB-1000 50 - 1000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTSB-2000 100 - 2000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTSB-2500 150 - 2500 grams or cN 1 g or cN 117 mm 7, 10, 15, 20, 30, 41 mm DTSB-4000 200 - 4000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTSB-5000 250 - 5000 grams or cN 1 g or cN 117 mm 7, 10, 15, 20, 30, 41 mm DTSB-10K 0.50 - 10.00 kg or daN 0.01 kg or daN 117 mm 7, 10, 15, 20, 30, 41 mm DTSB-20K*** 1.00 - 20.00 kg or daN 0.01 kg or daN 167 mm 7, 10, 15, 20, 30 mm DTSB-30K*** 1.50 - 30.00 kg or daN 0.01 kg or daN 217 mm 7, 10, 15 mm DTSB-50K*** 2.50 - 50 kg or daN 0.01 kg or daN 217 mm 7, 10 mm Notes * Factory calibration material textile ribbon or film, depending on tension range and roller width ** Outer distance between outside guide rollers ***Lever no longer required for high capacity models Roller Guide Roller Widths Line Speed VMax ...M/Min Roller Material* 7 mm 2000 Nickel-plated steel 10 mm 1000 Hard-coated aluminium 15 mm 1000 Hard-coated aluminium 20 mm 1000 Hard-coated aluminium 30 mm 1000 Hard-coated aluminium Other roller materials (nickel-plated steel or plastic), as well as special coatings (Code CF – for carbon fibre, NAV optimized, Code KE – ceramic, Code AH – anti adhesive) are available on request. Related Products Roller GuideAvailable Rollers for Hand-Held Tension Meters Downloads DTSB - Narrow Tape/Tow Digital Hand-Held Tension Meter- Instruction Manual DTSB - Narrow Tape/Tow Digital Hand-Held Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsb-narrow-tape-tow-digital-hand-held-tension-meter-p-1616.html Fri, 12 Apr 2024 21:51:28 +0000 USD 1616 Honigmann 1000 DTSB https://www.abqindustrial.net/store/images/DTSB.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxb-narrow-tape-tow-hand-held-digital-tension-meter-with-datalogging-p-1615.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1615 ]]>General Purpose Data-Logging Digital Tension Meter For measuring tensions of textile ribbons, films, foils, fibre bunches etc. 10 Tension ranges available from 5.0 - 500 cN up to 0.5 - 50 daN Memory for 60,000 readings Stationary electronic tension sensor for measuring tensions of textile ribbons, films, foils, fibre bunches etc.  10 Tension ranges available from 5.0 - 500 cN up to 0.5 - 50 daN Electronic tension meter for applications in textile and wire industry. Versatile applicable hand-held unit. Kit Contents DTXB - Narrow Tape / Tow Hand-Held Digital Tension Meter With Datalogging Accumulator Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction Manual Carrying case Features Dual-flanged outer guide rollers with various widths, from 7 mm to 30 mm (single-flanged rollers optional) For certain tension ranges and materials, it is possible to supply roller widths of 41 mm. Inquire. Memory for 60,000 data points with USB output with sample rates up to 1kHz Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Optional Wi-Fi for wireless communication to a PC Large, backlight LCD-display with 3 different displays: numeric, numeric with live load bar, numeric with graph (time-tension) Display automatically rotates in 90° steps (or can be locked in any desired position) Built-in Diameter Compensator System is used to adjust calibration curve for highest accuracy. Diameter is set with wheel and shown on display Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor 9 Separate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name) Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Selectable units of measurement: Grams, cN, Kg, daN, Lbs and Newtons (N) Setup parameters can be password protected if desired so they are not accidentally changed by the user User-set Min and Max alarms with indication on LCD if reading is out of limits User-adjustable DAMPING is used to minimize tension fluctuations Re-chargeable Lithium Polymer battery lasts 40 hours (continuous use, approx) Rugged aluminium housing with rubberized handle provides a secure and comfortable grip NIST-Traceable Calibration Certification in optionally available Specifications Accuracy For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for factory calibration plus 4 for customized calibrations Measuring units Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected) Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.2 mm Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Display Graphic LCD, Backlit (user-set: on/off/auto) 3 different displays Numeric, Numeric with graph (time-tension), X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping User-adjustable electronic damping (averaging)  calculated by [X-Values OLD + Y-Values NEW] ÷ 9 Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point: less than ± 0.3 % FS* /°C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) Housing material Die-cast aluminium Weight, net (gross) Up to DTS-50K approx. 875 g / 1550 g DTS-60K-V1 approx. 1040 g / 2700 g Output Signal USB Memory 60,000 values at 255 measuring periods Memory Modes 4 memory modes with statistical evaluation Ranges Model Tension Range* Resolution Measuring Head Width** Roller Widths (mm) DTXB-500 5.0 - 500 grams or cN 0.1 g or cN 55 mm 7, 10, 15, 20 mm DTXB-1000 50 - 1000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTXB-2000 100 - 2000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTXB-2500 150 - 2500 grams or cN 1 g or cN 117 mm 7, 10, 15, 20, 30, 41 mm DTXB-4000 200 - 4000 grams or cN 1 g or cN 55 mm 7, 10, 15, 20, 30, 41 mm DTXB-5000 250 - 5000 grams or cN 1 g or cN 117 mm 7, 10, 15, 20, 30, 41 mm DTXB-10K 0.5 - 10 Kg or daN 0.01 Kg or daN 117 mm 7, 10, 15, 20, 30, 41 mm DTXB-20K*** 1 - 20 Kg or daN 0.01 Kg or daN 167 mm 7, 10, 15, 20, 30 mm DTXB-30K*** 1.5 - 30 Kg or daN 0.01 Kg or daN 217 mm 7, 10, 15 mm DTXB-50K*** 2.5 - 50 Kg or daN 0.01 Kg or daN 217 mm 7, 10 mm * Depending on model, either width of filament guide or outer distance between outside guide rollers  ** Outer distance between outside guide rollers ***Lever no longer required for high capacity models Memory Modes - 60,000 data point capacity 4 Memory Modes: Mode S: statistics only (Last, Avg, Max. Min, Peak-Max, Peak-Min, Std Dev, # of records) Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurements Mode C: continuous logging over a user set time and different series of measurement (2 Hz) Mode F: fast, continuous logging at 1 kHz over a user set time and different batches (1000 samples/sec) Related Products Roller Guide Available Rollers for Hand-Held Tension Meters Downloads DTXB - Narrow Tape/Tow Hand-Held Digital Tension Meter with Datalogging- Instruction Manual DTXB - Narrow Tape/Tow Hand-Held Digital Tension Meter with Datalogging - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxb-narrow-tape-tow-hand-held-digital-tension-meter-with-datalogging-p-1615.html Thu, 13 Jan 2022 16:12:40 +0000 USD 1615 1000 DTXB https://www.abqindustrial.net/store/images/DTXB.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsf-optic-fiber-hand-held-digital-tension-meter-p-1614.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1614 ]]>For use on Optical fibers, glass fibers and fragile materials 3 Tension ranges available from 1 - 200g up to 10 - 1000g For diameters up to 1.5mm (0.060") 3 Tension ranges available from 1 - 200 g up to 10 - 1000 g 32 mm Diameter Lightweight Rollers minimize bend on fragile materials (Rollers are offered in Hardcaot Anodized Aluminum or Delrin Plastic). Kit Contents DTSF - Optic Fiber Hand-Held Digital Tension Meter AC adapter Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction manual Carrying case Features 32mm diameter V-grooved rollers are lightweight & ball bearing mounted for material speeds up to 4000 m/min Large bending radius assures gentle handling of the material (rollers in Hardcoat Anodized Aluminum or Delrin Plastic) Built-in memory for 60,000 data points with USB output with sample rates up to 1kHz 10 Material Calibration locations for customer calibrations Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Optional Wi-Fi for wireless data transfer to a PC Large, backlight LCD-display rotates in 90° steps for optimal viewing 3 different display modes: numeric  numeric with bargraph  numeric with graph (Time-Tension) Automatic "Zero-Setting“ in each measuring position User-set Min and Max alarms with indication on LCD if reading is out of limits High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Selectable units of measurement: cN, daN, g, kg, N, lb Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Some menu functions can be password protected Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation CE certified with 1-Year Warranty NIST-Traceable Calibration Certification in optionally availableSpecifications Calibration According factory calibration procedure Accuracy For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for factory calibration plus 4 for customized calibrations Measuring units Tension: cN, daN, g, kg, N, lb (user-selected)Thickness : mm, inch (user-selected) Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graphic LCD, Backlit (user-set: on/off/auto) 3 different displays Numeric, Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping User-adjustable electronic damping (averaging) calculated by [X-Values OLD + Y-Values NEW] ÷ 9 Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 – 45 °C Air humidity 85 % RH, max. Power supply Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) Housing material Die-cast aluminium Weight, net (gross) approx. 845 g / 1520 g Ranges Model Range Res Head Width* Caliration PA** DTXF-200 1 – 200.0 grams or cN 0.1 g or cN 140 mm 0.12 mm Ø (PA) DTXF-500 1 – 500.0 grams or cN 0.1 g or cN 140 mm 0.20 mm Ø (PA) DTXF-1000 10 – 1000 grams cN 1 g or cN 140 mm 0.30 mm Ø (PA) DTXF-2000 20 – 2000 grams or cN 1 g or cN 140 mm 0.50 mm Ø (PA) Notes * Outer distance between outside guide rollers** Suitable for 95 % of applications*** PA is Polyamide Monofilament Roller Guide Roller Widths Line SpeedVMax ...M/Min Roller Material* Standard 4000 Hard-coated aluminium Code T 4000 Plastic (PVC) red Related Products Roller GuideAvailable Rollers for Hand-Held Tension Meters Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsf-optic-fiber-hand-held-digital-tension-meter-p-1614.html Fri, 12 Apr 2024 22:02:42 +0000 USD 1614 Honigmann 1000 DTSF https://www.abqindustrial.net/store/images/DTSF.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxf-optic-fiber-hand-held-digital-tension-meter-with-datalogging-p-1613.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1613 ]]>For use on Optical fibers, glass fibers and fragile materials 3 Tension ranges available from 1 - 200g up to 10 - 1000g For diameters up to 1.5mm (0.060") Memory for 60,000 data points with USB output Optional Wi-Fi wireless data output 3 Tension ranges available from 1 - 200 g up to 10 - 1000 g 32 mm Diameter Lightweight Rollers minimize bend on fragile materials (Rollers are offered in Hardcaot Anodized Aluminum or Delrin Plastic) Kit Contents DTXF - Optic Fiber, Hand-Held Digital Tension Meter With Datalogging Accumulator Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction Manual Carrying case Features 32mm diameter V-grooved rollers are lightweight & ball bearing mounted for material speeds up to 4000 m/min Large bending radius assures gentle handling of the material (rollers in Hardcoat Anodized Aluminum or Delrin Plastic) Built-in memory for 60,000 data points with USB output with sample rates up to 1kHz 10 Material Calibration locations for customer calibrations Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Optional Wi-Fi for wireless data transfer to a PC Large, backlight LCD-display rotates in 90° steps for optimal viewing 3 different display modes: numeric  numeric with bargraph  numeric with graph (Time-Tension) Automatic "Zero-Setting“ in each measuring position User-set Min and Max alarms with indication on LCD if reading is out of limits High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Selectable units of measurement: cN, daN, g, kg, N, lb Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Some menu functions can be password protected Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation CE certified with 1-Year Warranty NIST-Traceable Calibration Certification in optionally available Specifications Calibration According to factory procedure Accuracy For PA from 5 % up to 100 % FS*:  ± 0.5 % FS* ± 1 digit  remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for factory calibration plus 4 for customized calibrations Measuring units Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected) Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graphic LCD, Backlit (user-set: on/off/auto) 3 different displays Numeric,  Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping User-adjustable electronic damping (averaging)  calculated by [X-Values OLD + Y-Values NEW] ÷ 9 Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 – 45 °C Air humidity 85 % RH, max. Power supply Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) Housing material Die-cast aluminium Housing dimensions (see Dimensions) Weight, net (gross) approx. 780 g / 1460 g Ranges Model Tension Range Resolution Measuring Head Width* Factory Calibration Material *** DTXF-200 1 – 200.0 grams or cN 0.1 g or cN 140 mm 0.12 mm Ø (PA) DTXF-500 1 – 500.0 grams or cN 0.1 g or cN 140 mm 0.20 mm Ø (PA) DTXF-1000 10 – 1000 grams cN 1 g or cN 140 mm 0.30 mm Ø (PA) DTXF-2000 20 – 2000 grams or cN 1 g or cN 140 mm 0.50 mm Ø (PA) * Outer distance between outside guide rollers ** Suitable for 95 % of applications *** PA is Polyamide Monofilament Roller Guide Standard 4000 Hard-coated aluminium Code T 4000  Plastic (PVC) red Memory Modes - 60,000 data point capacity 4 Memory Modes: Mode S: statistics only (Last, Avg, Max. Min, Peak-Max, Peak-Min, Std Dev, # of records) Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurements Mode C: continuous logging over a user set time and different series of measurement (2 Hz) Mode F: fast, continuous logging at 1 kHz over a user set time and different batches (1000 samples/sec) Related Products Roller Guide Available Rollers for Hand-Held Tension Meters Downloads DTXF - Optic Fiber, Hand-Held Digital Tension Meter with Datalogging - Instruction Manual DTXF - Optic Fiber, Hand-Held Digital Tension Meter with Datalogging - Software Manual DTXF - Optic Fiber, Hand-Held Digital Tension Meter with Datalogging - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxf-optic-fiber-hand-held-digital-tension-meter-with-datalogging-p-1613.html Thu, 13 Jan 2022 16:12:41 +0000 USD 1613 1000 DTXF https://www.abqindustrial.net/store/images/DTXF.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtse-limited-access-hand-held-digital-tension-meter-p-1612.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1612 ]]>4 Tension Ranges 1-200g up to 20-2000g For measurement in areas with limited space or tightly grouped filaments For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter 4 Tension Ranges 1-200g up to 20-2000g  Small measuring head with miniature rollers for applications with limited access space or where filaments run close together. For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter Kit Contents DTSE - Limited-Access, Hand-Held Digital Tension Meter AC adapter Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction manual Carrying case Features Small measuring head of 64mm x 36 mm for measurements with limited access space Small, ball-bearing mounted, hardcoat anodized aluminum V-grooved rollers Rollers suitable for material speeds up to 900 m/min (2000 m/min with "K" option) Large, backlight LCD-display rotates in 90° steps for optimal viewing 3 different display modes:  numeric  numeric with bargraph numeric with graph (Time-Tension) Automatic "Zero-Setting“ in each measuring position 4 Material Calibration locations for customer calibrations User-set Min and Max alarms with indication on LCD if reading is out of limits High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation User-Selectable units of measurement: cN, daN, g, kg, N, lb Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Setup parameters can be password protected so they are not accidentally changed by the user Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation CE certified with 1-Year Warranty NIST-Traceable Calibration Certification in optionally availableSpecifications Calibration According to factory procedure Accuracy For PA from 5 % up to 100 % FS*:  ± 0.5 % FS* ± 1 digit  remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for factory calibration plus 4 for customized calibrations Measuring units Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected) Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graphic LCD, Backlit (user-set: on/off/auto) 3 different displays Numeric,  Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping User-adjustable electronic damping (averaging)  calculated by [X-Values OLD + Y-Values NEW] ÷ 9 Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 – 45 °C Air humidity 85 % RH, max. Power supply Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) Housing material Die-cast aluminium Housing dimensions (see Dimensions) Weight, net (gross) approx. 780 g / 1460 g Ranges Model Range Res Head Width* Yard Count Caliration PA** DTSE-200 1 – 200.0 cN 0.1 cN 36 mm max. 200 tex 0.12 mm DTSE-500 1 – 500.0 cN 0.1 cN 36 mm max. 500 tex 0.20 mm DTSE-1000 10 – 1000 cN 1 cN 36 mm max. 1000 tex 0.30 mm DTSE-2000 20 – 2000 cN 1 cN 36 mm max. 2000 tex 0.50 mm Notes * Width of bracket assembly ** Suitable for 95 % of applications Roller Guide Roller Widths Line Speed VMax ...M/Min Roller Material* Standard 900 Hard-coated aluminium Code K 2000 Hard-coated aluminium Related Products Roller GuideAvailable Rollers for Hand-Held Tension Meters Downloads DTSE - Limited-Access, Hand-Held Digital Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtse-limited-access-hand-held-digital-tension-meter-p-1612.html Fri, 12 Apr 2024 21:56:29 +0000 USD 1612 Honigmann 1000 DTSE https://www.abqindustrial.net/store/images/DTSE.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxe-limited-access-hand-held-digital-tension-meter-with-datalogging-p-1611.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1611 ]]>4 Tension Ranges 1-200g up to 20-2000g For measurement in areas with limited space or tightly grouped filaments For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter Memory for 60,000 data points with USB output Optional Wi-Fi wireless data output 4 Tension Ranges 1-200g up to 20-2000g  Small measuring head with miniature rollers for applications with limited access space or where filaments run close together For uses on textiles (2000 tex, max) or wires up to 0.5 mm diameter Kit Contents DTXE - Limited-Access, Hand-Held Digital Tension Meter With Datalogging Accumulator Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Instruction Manual Carrying case Features Small measuring head of 64mm x 36 mm for measurements with limited access space Small, ball-bearing mounted, hardcoat anodized aluminum V-grooved rollers Rollers suitable for material speeds up to 900 m/min (2000 m/min with "K" option) Built-in memory for 60,000 data points with USB output with sample rates up to 1kHz 10 Material Calibration locations for customer calibrations Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Optional Wi-Fi for wireless communication to a PC Large, backlight LCD-display with 3 user-selected display modes: Large-numeric, Numeric with Bar Graph, Numeric with Trend Graph (tension vs time) Display automatically rotates in 90° steps (or can be locked in any desired position) Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor 4 Seperate Calibration Material memory locations for custum calibrations (can be peformed by end-user and saved with alpha-numeric name) Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material User-set Min and Max alarms with indication on LCD if reading is out of limits High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Selectable units of measurement: cN, daN, g, kg, N, lb Easy-to-navigate menu system allows for quick adjustments of many parameters User-adjustable DAMPING is used to minimize tension fluctuations Setup parameters can be password protected so they are not accidentally changed by the user Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Re-chargeable Lithium Polymer battery lasts 40 hours (continuous use, approx) CE certified, interference resistant against static electrifications NIST-Traceable Calibration Certification is optionally available Specifications Calibration According SCHMIDT factory procedure Accuracy For PA from 5 % up to 100 % FS* : ± 0.5 % FS* ± 1 digit  remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for SCHMIDT calibration plus 10 for customized calibrations Measuring units Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graph LCD 3 different displays Numeric, Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Output signal USB Memory 60.000 values split up to 255 measuring positions Memory modes 4 memory modes with statistical evaluation Damping Adjustable electronic damping (averaging) Cal. Adjustment ± 10 steps in 1 % increment Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 – 45 °C Air humidity 85 % RH, max. Power supply LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h AC adapter 100 – 240 V AC,adapter (EU, USA, UK) Housing material Die-cast aluminium Housing dimensions (see Dimensions) Weight, net (gross) Approx. 780 g / 1460 g Ranges Model DTXE 200 DTXE 500 DTXE 1000 DTXE 2000 Range 1 – 200.0 cN 1 – 500.0 cN 10 – 1000 cN 20 – 2000 cN Resolution 0.1 cN 0.1 cN 1 cN 1 cN Head Width* 36 mm 36 mm 36 mm 36 mm Textile Industry e. g. Yarn Count max. 200 tex max. 500 tex max. 1000 tex max. 2000 tex * Width of bracket assembly ** Suitable for 95 % of applications Memory Modes - 60,000 data point capacity 4 Memory Modes: Mode S: statistics only (Last, Avg, Max. Min, Peak-Max, Peak-Min, Std Dev, # of records) Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurements Mode C: continuous logging over a user set time and different series of measurement (2 Hz) Mode F: fast, continuous logging at 1 kHz over a user set time and different batches (1000 samples/sec) Related Products Roller Guide Available Rollers for Hand-Held Tension Meters Downloads DTXE - Limited-Access, Hand-Held Digital Tension Meter with Datalogging - Instruction Manual DTXE - Limited-Access, Hand-Held Digital Tension Meter with Datalogging - Manual Software DTXE - Limited-Access, Hand-Held Digital Tension Meter with Datalogging - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxe-limited-access-hand-held-digital-tension-meter-with-datalogging-p-1611.html Thu, 13 Jan 2022 16:12:40 +0000 USD 1611 1000 DTXE https://www.abqindustrial.net/store/images/DTXE.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsl-heavy-duty-hand-held-digital-tension-meter-p-1610.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1610 ]]>Heavy Duty Digital Tension Meter for Sensitive Materials 4 Ranges up to 20 Kg For Wire & Cables up to 5 mm diameter (.200") 4 Tension ranges available from 150 - 2500 g up to 2 - 20 Kg For use on cables, ropes, wires, buffer tubes, optic fiber tows etc. up to 10 mm, as well as flat material up to 10 mm widthLarge, hardened guide rollers for minimized material deflection with 29.5 mm groove Kit Contents DTSL - Heavy-Duty, Hand-Held Digital Tension Meter AC adapter with country adapters (EU, US, UK) USB cable Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Operating Instruction Carrying case Features Large 30 mm diameter V-grooved rollers fabricated from Hardened Steel for materials up to max. 5 mm diameter) Optional U-Grooved Rollers (Code "R1"), Flat Cylindrical Rollers 6mm width between flanges (Code "B6) or 10mm width between flanges (Code "B10") Large diameter rollers for minimize material deflection 3 different display modes:  numeric  numeric with bargraph  numeric with graph (Time-Tension) Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor 4 Seperate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name) User-set Min and Max alarms with indication on LCD if reading is out of limits User-Selectable units of measurement: cN, daN, g, kg, N, lb Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Setup parameters can be password protected so they are not accidentally changed by the user Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation CE certified with 1-Year Warranty NIST-Traceable Calibration Certification in optionally available Specifications Calibration According SCHMIDT factory procedure Accuracy For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials:  ±3 % full scale and ±1 digit Memory for material curves 1 for SCHMIDT calibration plus 4 for customized calibrations Measuring units Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graph LCD 3 different displays Numeric  Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Damping Adjustable electronic damping (averaging) Cal. Adjustment ± 10 steps in 1 % increment Thickness compensation Max. 2.5 mm (not available for all models) Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h AC adapter 100 - 240 V AC, adapter (EU, USA, UK) Housing material Die-cast aluminium Housing dimensions (see Dimensions) Weight, net (gross) approx. 940 g / 1620 g Ranges Model Tension Range Resolution Measuring Head Width* DTSL-2500 150 - 2500 cN 1 cN 185 mm DTSL-5000 250 - 5000 cN 1 cN 185 mm DTSL-10K 1 - 10 daN 0.01 daN 235 mm DTSL-20K 2 - 20 daN 0.01 daN 235 mm * Width of bracket assembly Roller Guide Roller Widths Line Speed VMax ...M/Min Roller Material* Standard 4000 Hardened steel Code R1 4000 Hard-chromed steel (Radius R5) Code B6 2000 Hardened steel (width 6 mm) Code B10 2000 Hardened steel (width 10 mm) Related Products Roller Guide Available Rollers for Hand-Held Tension Meters Downloads DTSL - Heavy-Duty, Hand-Held Digital Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtsl-heavy-duty-hand-held-digital-tension-meter-p-1610.html Fri, 12 Apr 2024 22:06:39 +0000 USD 1610 Honigmann 1000 DTSL https://www.abqindustrial.net/store/images/DTSL.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxl-heavy-duty-hand-held-digital-tension-meter-with-datalogging-p-1609.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1609 ]]>Heavy Duty Digital Tension Meter for Sensitive Materials 4 Ranges up to 20 Kg For Wire & Cables up to 5 mm diameter (.200") Memory for 60,000 data points with USB output Optional Wi-Fi wireless data output 4 Tension ranges available from 150 - 2500 g up to 2 - 20 Kg For use on cables, ropes, wires, buffer tubes, optic fiber tows etc. up to 10 mm, as well as flat material up to 10 mm width Large, hardened guide rollers for minimized material deflection with 29.5 mm groove Memory for 60,000 data points with USB output Kit Contents DTXL - Heavy-Duty, Hand-Held Digital Tension Meter with Datalogging Accumulator and AC adapter with country adapters (EU, US, UK) USB cable Software Tension Inspect 3 Certificate of compliance with the order 2.1 according EN 10204 free of charge Operating instruction Carrying case Features User Selectable Units Grams or Centinewtons Large 30 mm diameter V-grooved rollers fabricated from Hardened Steel for materials up to max. 5 mm diameter) Optional U-Grooved Rollers (Code "R1"), Flat Cylindrical Rollers 6mm width between flanges (Code "B6) or 10mm width between flanges (Code "B10") Memory for 60,000 data points with USB output with sample rates up to 1kHz Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data Optional Wi-Fi for wireless communication to a PC Large, backlight LCD-display with 3 different displays: numeric, numeric with live load bar, numeric with graph (time-tension) Display automatically rotates in 90° steps (or can be locked in any desired position) Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor 9 Separate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name) Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks Selectable units of measurement: Grams, cN, Kg, daN, Lbs and Newtons (N) Setup parameters can be password protected if desired so they are not accidentally changed by the user User-set Min and Max alarms with indication on LCD if reading is out of limits User-adjustable DAMPING is used to minimize tension fluctuations Re-chargeable Lithium Polymer battery lasts 40 hours (continuous use, approx) Rugged aluminium housing with rubberized handle provides a secure and comfortable grip Specifications Calibration According SCHMIDT factory procedure Accuracy For PA from 5 % up to 100 % FS*:  ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit Memory for material curves 1 for SCHMIDT calibration plus 10 for customized calibrations Measuring units Force (switchable): cN, daN, g, kg, N, lb Thickness (switchable): mm, inch Overrange Approx. 10 % FS*, full scale, without accuracy guarantee Overload protection 100 % full scale Measuring principle Strain gauge bridge Signal processing Digital, 16 bit A/D converter Measuring frequency Max. 1 kHz (1000 measurings/sec.), intern 8 kHz Measuring roller deflection Max. 0.2 mm Display Graph LCD 3 different displays Numeric Numeric with graph (time-tension) X-Y-diagram Display update rate Approx. 2 times per second Memory MIN, MAX, PEAK, AVG and LAST Output signal USB Memory 60.000 values split up to 255 measuring positions Memory modes 4 memory modes with statistical evaluation Damping Adjustable electronic damping (averaging) Cal. Adjustment ± 10 steps in 1 % increment Auto power off Approx. 3 minutes of non-use Temperature coefficient Gain: less than ± 0.01 % FS* /°C Zero point less than ± 0.03 % FS* /°C Temperature range 10 – 45 °C Air humidity 85 % RH, max. Power supply LiPo accumulator (approx. 40 h continuous use), charging time approx. 3 1/2 h AC adapter 100 – 240 V AC,adapter (EU, USA, UK) Housing material Die-cast aluminium Housing dimensions (see Dimensions) Weight, net (gross) Approx. 940 g / 1620 g Ranges Model Measuring Range Resolution Measuring Head Width* DTXL-2500 150 – 2500 cN 1 cN 185 mm DTXL-5000 250 – 5000 cN 1 cN 185 mm DTXL-10K 1 – 10.00 daN 0.01 daN 235 mm DTXL-20K 2 – 20.00 daN 0.01 daN 235 mm * Width of bracket assembly Roller Guide Order-Code Line Speed vmax. … m/min Roller Material Standard 4000 Hardened steel Code R1 4000 Hard crome-plated steel (radius R5) Code B6 2000 Hardened steel, width 6 mm Code B10 2000 Hardened steel, width 10 mm Related Products Roller Guide Available Rollers for Hand-Held Tension Meters Downloads DTXL - Heavy-Duty, Hand-Held Digital Tension Meter with Datalogging - Instruction Manual DTXL - Heavy-Duty, Hand-Held Digital Tension Meter with Datalogging - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/dtxl-heavy-duty-hand-held-digital-tension-meter-with-datalogging-p-1609.html Thu, 13 Jan 2022 16:12:41 +0000 USD 1609 1000 DTXL https://www.abqindustrial.net/store/images/DTXL.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/etmx-etmpx-data-logging-limited-access-digital-tension-meter-p-1608.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1608 ]]>Price: $ Call for Price Limited Access Digital Tension Meter with Data-Logging Built-in datalogger stores 4000 values plus Last, average, MAX, MIN, MAX-PEAK, MIN-PEAK plus Roller model for speeds up to 2000 m/min or "P" model with Ceramic Pins for speeds up to 6000 m/min 3 Ranges 0.5 - 100, 2 - 200, 2 - 500 (g or cN) Three long, closely-spaced slender shafts with precision guide rollers or pins at their ends combine with the latest in microprocessor technology to make this instrument top choice for all limited-access, tension measuring applications. Store up to 4000 displayed tension values in memory and statistics (Last, AVG, MIN, MAX, MIN-PEAK, MAX-PEAK), which can be transmitted using the serial output port. ETMX models feature miniature, high speed rollers for filament speeds up to 2000 m/min. ETMPX models features non-rotating, ceramic pins for speeds to 6000 m/min. Reversible display for right or left-hand operation. Kit Contents ETMX - ETMPX Data Logging Limited Access Digital Tension Meter Long life 9V lithium battery Universal voltage charger USB Data Transfer Cable TensionInspect PC Software Instruction manual Carrying case Photo Gallery Features User Selectable Units Grams or Centinewtons New filament guide for easy acquisition of material Adjustable damping for easier readings when tension fluctuates Backlit LCD Display Chrome-plated steel ball-bearing mounted rollers for material speeds up to 2000 m/min USB output for batch download or real-time data transfer to TensionInspect Software for Windows Non-rotating Ceramic Thread Guides suggested for material speeds over 2000 meters/min Powered by rechargeable Lithium Polymer battery, 60 hr battery life w/ Universal voltage AC-Charger supplied Built-in memory stores Last, average, MAX, MIN, MAX-PEAK, MIN-PEAK plus 4000 values Continuous, automatic Zero Setting (independent to measuring position) Specifications Accuracy ±1 % full scale ±1 digit or better (typical ±0.5 % full scale) Factory Calibration Material 0.20 mm Ø Polyamid Monofilament Minimum Access Space Required 3/4" x 1" (20 x 26mm) Guide Roller / Pin Material Rollers, chrome-plated steel, std : 2000 m/min Ceramic pins, optional : 6000 m/min Measuring Principle Strain-gauge bridge Maximum Sensing-Roller Displacement 0.5mm Scanning Frequency 100 / sec., except 40/sec. in PEAK mode Display Update 0.5 sec. (2 times per second) Data Output USB, 100 Hz max Memory Last, average, MAX, MIN, MAX-PEAK, MIN-PEAK plus data 4000 Thermal Drift 0.25% full scale per degree C Natural Frequency 250 Hz Over Range 10% FS, without accuracy guarantee Overload Protection 200% Temperature Limits 50-115° F (10-45° C) Automatic Zero ± 20% of range Rel. Humidity Limit 85% Battery/Life 3.6 volt, Lithium-Polymer rechargeable / Approx. 60 hrs Life (3.5 Hr recharge), PN E08710 Battery Charger 100...240 V AC with plug adapters (EU/USA/UK) Low Battery Voltage Indicator LO BAT, or equivalent display Weight (net/gross) 12 oz. (340 g) / 2.75 Lbs (1250 g) Dimensions 13" x 1-3/4" x 1" (330 x 45 x 25mm) Housing Material Aluminium frame profile with plastic outer casing (PVC) Set of Ceramic Pins 540020 (for ETMPX) Tension Ranges Model Range Resolution Rollers or Pins ETMX-100 0.5-100.0 0.1 Rollers ETMX-200 2-200 1 Rollers ETMX-500 2-500 1 Rollers ETMPX-100 0.5-100.0 0.1 Ceramic Pins ETMPX-200 2-200 1 Ceramic Pins ETMPX-500 2-500 1 Ceramic Pins Selectable Units: Grams or Centinewtons Outer Roller Spacing 24mm Standard Calibration Material 0.20 mm Polyamide Monofilament Dimensions Related Products Tension Inspect Data Transfer & Analysis Program Data can be viewed and analyzed in TensionInspect or transferred to Excel Selectable sample rates and scalable trend graph "x" and "y" axis Downloads ETMX / ETMPX - Data Logging Limited Access Digital Tension Meter - Data Sheet ETMX / ETMPX - Data Logging Limited Access Digital Tension Meter - Instruction Manual ETMX / ETMPX - Data Logging Limited Access Digital Tension Meter - Inspet Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/etmx-etmpx-data-logging-limited-access-digital-tension-meter-p-1608.html Thu, 13 Jan 2022 16:12:43 +0000 USD 1608 1000 ETMX - ETMPX https://www.abqindustrial.net/store/images/ETMX%20-%20ETMPX.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-125-12-limited-access-tension-meter-p-1607.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1607 ]]>Precision Tension Meter for measuring tension on textiles, wires, cables, tire cords, magnetic tapes, carbon fibers etc. 8 ranges 0 to 50 g - 0 to 4 kg 7 Ranges0 - 10g up to 0 - 500g The Digitens 125-12 Limited Access Tension Meter are extremely compact for use on low tension applications where access space is limited. They are offered with ceramic thread guides or precision ball bearing mounted rollers. High overload protection and optional waterproof design makes this model ideal for all laboratory & production. Two kinds of ceramic thread guides with a gentle surface and a low coefficient of friction are supplied to each sensor for various measuring tasks: On the left:• structurered surface (orange peel), especially for flat yarn On the right:• polished surface, e.g. for texturized yarn The optional available, shiftable thread guiding device FFA offers comfortable and smooth threading into the running process Features Small angle of contact minimizes twisting interference Easy to load thread Ceramic thread guides provide a surface that is gentle on the threads, making for low friction and even wear at high running speeds Specifications Measuring Principle Capacitive Sensing Tension Ranges 0-10g, 0-20g, 0-30g, 0-50g, 0-100g, 0-200g, 0-300g, 0-500g Accuracy ±1.0% or better Material Deflection 15 Degrees Thread Guides Ceramic Pins (Standard)Ball-bearing mounted rollers (optional) Dimensions 100mm x 25mm diameter Weight 100 grams Options Outer thread guide shifting plateBall-bearing mounted rollersSplash-proof protectionSpecial thread guide design Calibration Certificate Optional Ranges Model Range Model Range 125 - 12 - 10 0 - 10g 125 - 12 - 100 0 - 100g 125 - 12 - 20 0 - 20g 125 - 12 - 200 0 - 200g 125 - 12 - 30 0 - 30g 125 - 12 - 300 0 - 300g 125 - 12 - 50 0 - 50g 125 - 12 - 500 0 - 500g Related Products D-485Digital Tension Indicator with Built-In AmplifierAutomatic zero setting "Peak" function retains maximum reading on display TM-353Analog Tension Indicator with Built-In AmplifierProvides 0-1 VDC analog output for recording purposes 125-S-HDIHand-Held Tension SensorIdeal for high-strength, high denier yarns and fibers running at linear speeds up to 5000 m/min Special plasma-coated steel provides a ceramic-like coating with special "dimpled" surface structure which minimizes surface contact between the running yarn and the Non-rotating guide and sensor pins Downloads 125-12 Limited Access Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-125-12-limited-access-tension-meter-p-1607.html Fri, 12 Apr 2024 18:43:46 +0000 USD 1607 Digitens 1000 125-12 https://www.abqindustrial.net/store/images/125-12.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-125-12-lfx-limited-access-tension-meter-with-extra-long-probes-p-1606.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1606 ]]>Limited Access Digital Tension Meter with extra long sensing pins for use with textiles, fibers, yarns. Low friction and low stress for the yarn even at high speeds 8 Ranges: 0 - 10g up to 0 - 500g The Digitens 125-12-LFX Limited Access Tension Meter with Extra Long Probes are designed to measure tensile forces in textile threads. They find applications in spinning mills, texturizing operations, research laboratories, weaving mills, knitting mills, yarn spinning plants etc.  The slim design in addition to the long measuring fingers enables the user to measure at narrow available space and difficult accessible, distant locations.  Comfortable and safe handling even on measurements in a heat chamber by lever-operated auto-threading function Features Extra-long probes to reach any inconvenient place. Small yarn deflection angle for minimum interference to yarn path and twist, low mechanical load to the thread. Low friction and low stress for the yarn even at high speeds. Robust by effect overload protection (1000% related to the rated load.) High measuring precision and long-term stability. Special clip type lever for safe and comfortable threading even at high temperatures at the measuring location. Ceramic thread guides with a surface which is gentle on the threads. High natural frequency for use at line speeds > 7000m/min Thread Guides The non-rotation ceramic thread guides have a gnetle surface with low coefficient of friction Standard: Structured surface (orange peel), especially for flat yarn. Option: Polished surface, for texturized yarn. Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes 125-S-HDI Hand-Held Tension Sensor Ideal for high-strength, high denier yarns and fibers running at linear speeds up to 5000 m/min Special plasma-coated steel provides a ceramic-like coating with special "dimpled" surface structure which minimizes surface contact between the running yarn and the Non-rotating guide and sensor pins Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-125-12-lfx-limited-access-tension-meter-with-extra-long-probes-p-1606.html Thu, 13 Jan 2022 16:10:28 +0000 USD 1606 Digitens 1000 125-12-LFX https://www.abqindustrial.net/store/images/125-12-LFX.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/checkline-125-13-precision-tension-meter-p-1605.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1605 ]]>Precision Tension Meter for measuring tension on textiles, wires, cables, tire cords, magnetic tapes, carbon fibers etc. 8 ranges 0 to 50 g - 0 to 4 kg 8 Ranges: 0 - 50g up to 0 - 4,000g Precision Tension Meter for measuring tension on textiles, wires, cables, tire cords, magnetic tapes, carbon fibers etc. Features Small wrap angle (15°) for minimum interaction with the product being measured Excellent long-term stability for highly reproducible measuring results Interchangeable guide components For measurement of monofilament textiles, industrial yarns, carbon fiber, copper and steel wires up to 0.5mm Ø, woven tapes, belts, magnetic tapes 3 ball-bearing aluminium rollers with V-groove, root diameter 11mm with easy-running bearings Shiftable thread guiding device FFA for 125-13 comfortable, easy threading into the running process for smooth threading, gentle to the material Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes 125-S-HDI Hand-Held Tension Sensor Ideal for high-strength, high denier yarns and fibers running at linear speeds up to 5000 m/min Special plasma-coated steel provides a ceramic-like coating with special "dimpled" surface structure which minimizes surface contact between the running yarn and the Non-rotating guide and sensor pins Downloads 125-13 Precision Tension Meter- Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/checkline-125-13-precision-tension-meter-p-1605.html Thu, 13 Jan 2022 16:08:26 +0000 USD 1605 Checkline 1000 125-13 https://www.abqindustrial.net/store/images/125-13.jpg https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-bhi3-advanced-barcol-hardness-impressor-p-1603.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1603 ]]>DeFelsko PosiTector BHI Advanced Barcol Hardness Impressor Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester Lightweight, portable device can be used in any orientation The DeFelsko PosiTector BHI Barcol Hardness Impressor measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester Lightweight, portable device can be used in any orientation PosiTector interchangeable platform – attach any PosiTector probe to a single gage body USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software Certificate of Calibration showing traceability to NIST included (Long Form) Conforms to ASTM B648/D2583, DIN EN 59 and AS/NZS 3572.22 Kit Contents The DeFelsko PosiTector BHI3 Advanced Barcol Hardness Impressor Kit includes everything needed for testing PosiTector Advanced Gage Body BDYADV-G PosiTector BHI Probe PRBBHI Two (2) Test Disks Leveling Plate and Glass Plate Replacement Indentor with Replacement Tool Protective rubber holster with belt clip Wrist Strap and Protective lens shield 3 AAA alkaline batteries PosiSoft Software and USB cable Long Form Certificate of Calibration Hard Shell Case and Instructions Two (2) Year Warranty Features  Simple Easy-to-read digital display Comparable to 934-1 Barcol Hardness Tester User-adjustable measurement time with onscreen countdown Includes spare, field replaceable indentor with replacement tool Lightweight, portable device can be used in any orientation RESET feature instantly restores factory settings Durable Solvent, acid, oil, water and dust resistant - weatherproof Shock-absorbing, protective rubber holster with belt clip Hard-shell carrying case included Two year warranty on gage body AND probe Accurate Long Form Certificate of Calibration included Hi-RES mode increases displayed resolution for use on applications that require greater precision Includes hard and soft aluminum alloy test disks and leveling plate to verify gage operation Conforms to national and international standards including ASTM Versatile PosiTector body accepts all PosiTector BHI, SHD, 6000, 200, DPM, IRT, RTR, SPG, SST, and UTG probes easily converting from a hardness tester to a coating thickness gage, dew point meter, infrared thermometer, surface profile gage, soluble salt tester, or ultrasonic wall thickness gage 1 and 2 point calibration options with Cal Reset to restore factory settings Selectable display languages High contrast LCD with backlit display Flip display enables right-side-up viewing Uses alkaline or rechargeable batteries (built-in charger) Powerful Continually displays/updates average, standard deviation, min/max hardness and number of readings while measuring Screen Capture - save screen images for record keeping and review HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits Sealed USB Port for fast, simple connection to a PC and to supply continuous power PosiSoft USB Drive - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Software Updates via web keep your gage current Software Solutions for viewing, analyzing and reporting data Every stored measurement is date and time stamped Advanced Model Features Includes ALL features as shown: NEW Storage of 250,000 readings from multiple probes in up to 1,000 batches and sub-batches Auto Sub-Batch—automatically create new sub-batches after the desired number of readings are taken Live graphing of measurement data NEW Touchscreen keyboard for quickly renaming batches, adding notes, and more WiFi technology wirelessly synchronizes with PosiSoft.net and downloads software updates Bluetooth 4.0 Technology for data transfer to a mobile device running the PosiTector App or optional portable printer. BLE API available for integration into third-party software. Integrate with third-party software, drones, ROVs, PLCs, and robotic devices using several industry-standard communication protocols Store thickness, profile, environmental, salt contamination, hardness, and wall thickness measurements in individual batches Specifications Measurement Range 20 - 100 Barcol Resolution 0.1 Barcol Accuracy ± 2 Barcol Gauge Body Size 137 x 61 x 28 mm (5.4" x 2.4" x 1.1") Gauge Body Weight 140 g (4.9 oz) without batteries Probe Size 145 x 97 x 64 mm (5.7" x 3.8" x 2.5") Probe Headroom 140 mm (5.5") Probe Weight 400 g ( 14.1 oz) PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More Accessories Test Disks For verifying the operation of Barcol hardness impressors. Choose from hard or soft aluminum alloys. Replacement Glass Plate For zeroing worn or replaced indentors on the PosiTector BHI. Replacement Indentors Spare indentor tips (2pk) for PosiTector BHI. Includes additional indentor with replacement tool. Downloads DeFelsko PosiTector BHI Barcol Hardness Impressor - Instruction Manual DeFelsko PosiTector BHI Barcol Hardness Impressor - Literature DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/hardness-testers-and-durometers-c-105/barcol-hardness-testers-c-105_118/defelsko-positector-bhi3-advanced-barcol-hardness-impressor-p-1603.html Tue, 20 Jun 2023 16:51:35 +0000 USD 1603 DeFelsko 997 BHI3 https://www.abqindustrial.net/store/images/defelsko-positector-bhi-adv.jpeg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/133-32-precision-tension-meter-p-1602.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1602 ]]>Designed for measuring wires & cables that are fixed at both ends. (closed system) 5 Ranges, up to 1,000lb The angled design utilized in this series gives users a general-purpose sensor with a narrow profile. This makes for convenient measurement operations even where space is restricted - typical when measuring woven tapes and web threads The range of applications for this series of sensors covers extensive areas in research, quality control and production in the wire, cable, film and textile industries and the like Features for measuring monofilament textiles, copper- and steel wires, healds, carbon fibres up to 2,0 mm Ø, as well as tapes, belts, thread groups, films, foils, magnetic tapes, etc. 3 ball-bearing aluminium rollers with V-groove, root Ø 11mm customized guide rollers optional measuring path: 70, 100 or 120mm easy handling even when inserting into running products in cramped quarters excellent long-term stability and high precision for reproducible measuring results effective overload protection for uninterrupted availibility diameter, stiffness, weight and speed of the product being measured have no influence on measuring accuracy smallest possible angle of contact (10°) means minimum impact by: inherent stiffness acceleration torques inertial forces due to deflection available in 6 rated load ranges: 0 to 300cN ... 0 to 4daN Downloads 133-32 Precision Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/133-32-precision-tension-meter-p-1602.html Thu, 13 Jan 2022 16:08:22 +0000 USD 1602 1000 133-32 https://www.abqindustrial.net/store/images/133-32.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/136-3e-wire-cable-tension-meter-for-wires-anchored-at-both-ends-p-1601.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1601 ]]>Heavy Duty Tension Meter 12 Ranges 5kg up to 500kg 200% overload protection 5 Ranges, up 1000lbs / 500 Kg / 5000N For Wire Diameters up to 0.200" / 5mm Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) such as guy wires, support cables, tethers and more. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications. The 136-3E employs a unique roller configuration and measurement scheme to minimize the deflection of the wire/cable. The total wrap angle of the material over the center sensing roller is 3 degrees eliminating all measurement errors! No other company or product in the world can make this claim! The material threading pattern (refer to illustration below) insures easy material acquisition and good tactile feedback allowing for excellent repeatability between measurements as well as between different users. Precision ball-bearing rollers are used to eliminate any error caused by friction. These rollers are mounted on a large mounting plate properly spaced to remove the negative incluence normally caused by the inherent rigidity of wires and cable up to 5 mm in diameter (0.200"). Diameter Compensation Adjustment The 136-3E is fitted with an exclusive mechanical compensation which adjusts the measuring geometry to insure optimal accuracy regardless of the diameter of the material to be measured. It consists of an calibrated rotary dial fitted to the rear-side of the right outer roller. The user simply rotates the dial until the numeric value on the dial is set to the actual wire diameter & then is locked in position. To change for a larger or smaller diameter, unlock and dial to new value. Simple, quick and effective! Features Minimal material deflection eliminates measurement errors Built-in material diameter compensation for error-free measurements of samples up to 5 mm (0.200") Wear-resistant, ball-bearing guide rollers eliminate errors caused by friction Splashproof version of sensor & indicator is offered for use in wet environments (in rain or near splashing water) Specifications Accuracy ± 1.5% Full Scale or better Outer Roller Spacing (c:c) 370 mm Wrap Angle 3 Degrees Additional Length Effect 0.12 mm Guide Rollers V-Grooved Aluminum 47/21 mm (OD/Root Diameter) Roller Material Overload Protection 200% + Calibration Certificate Optional Pricing Please Call Us for Pricing 718-846-6458 Ranges Model Range 1363E-10LB-V 0-10 Lb 0-5 Kg 0-50 N 1363E-100LB-V 0-100 0-50 Kg 0-500 N 1363E-200LB-V 0-200 Lb 0-100 Kg 0-1000 N 1363E-500LB-V 0-500 Lb 0-250 Kg 0-2500 N 1363-1000LB-V 0-1000 Lb 0-500 Kg 0-5000 N Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display Downloads Honigmann 136-3E Wire/Cable Tension Meter - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/136-3e-wire-cable-tension-meter-for-wires-anchored-at-both-ends-p-1601.html Thu, 13 Jan 2022 16:08:23 +0000 USD 1601 1000 136-3E https://www.abqindustrial.net/store/images/136-3E.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/kxe-warp-tension-meter-p-1600.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1600 ]]>Price: Call for Price Warp Tension Meter Portable measuring head to measure yarn groups of weaving and warping machines The KXE Warp Tension Meter is designed to measure tensions during warping and weaving. The unique sensor configuration provided two 25 mm wide cylindrical roller for the capture of two groups of yarns, one on each side of the sensor for measurement. Therefore the sensor will be measuring 50 mm of ends while the process is running. The electronic indicator provides for measurement and storage of the critical high and low peaks that will be measuring in the weaving operation.These peaks can them be analyzed and used for process evaluation. Stored data can be transferred to a PC and analyzed using the FREE Tension Inspect software. Kit Contents KXE Warp Tension Meter Connecting cable supplied Rechargeable battery Universal AC-Charger Includes USB data transfer cable Tension Inspect Software Features Portable measuring head to measure yarn groups of weaving and warping machines using 50 mm wide measuring roller The sensor can easily be engaged or disengaged while the machine is running Battery-powered Hand-Held Tension Indicator features backlit LCD Display with 2 times/second update rate. Storage of last, average, Max, MIN, PEAK-MAX, PEAK-MIN tension values during an operator set measuring period 4 different memory modes can be selected by the operator: Mode S: only statistical values per series are displayed Mode L: statistics plus 10 displayed values of each series of measurement Mode C: statistics plus 4000 displayed values arbitrary splited up to 255 series Mode F: as C plus higher sampling rate of 100 Hz = values/s LCD display with illuminated backgroud for better reading Adjustable electronic damping for more stable readings when tensions are constantly fluctuating Constant measuring width at the yarn group of 50 mm by catch thread system Values on the LCD display can be flipped/reversed for right or left hand use Memory of max. 4000 displayed tension values split up to 255 series of measurements and statistics (Last, AVG, MIN and MAX of displayed values, MIN-PEAK and MAX-PEAK are values measured within a measuring frequency of 5 kHz) USB Output for stata transfer to PC. Supplied with TensionInspect Software and USB cable Specifications Accuracy for 10 % to 90 % of range: ±1 % full scale and ±1 digit for remainder of range: ±3 % full scale and ±1 digit Calibration using factory calibration material and procedure Measuring Units daN Overrange 10 % full scale, without accuracy guarantee Overload Protection 200% full scale Measuring Principle Strain gauge bridge Signal Processing Digital 24 bit A/D converter Damping Adjustable electonic damping (Moving averaging) Measuring Frequency 1 kHz, internal only (MIN-PEAK, MAX-PEAK) Display 4 digit, 11 mm high backlit LCD Display Display Update Time Approx. 2 times per second Memory Max. 4000 values plus statistics Output Signal USB Communications Frequency 1 to max. 100 readings/sec Connection Cable Sensor to display unit 1.5 meter (5 ft.) Temperature Coefficient Gain: less than ± 0.01 % full scale /C° Temperature Range 10 - 45 °C Air Humidity 85 % RH, max. Auto Power Off Appox. after 3 minutes of non-use Battery Built-in Lithium Ion Rechargeable Battery Battery Life Battery Recharging approx. 3.5 hours for full charge Battery Charger 100 - 240 V AC with plug adapters for EU, USA & UK Housing Material Aluminium profile with plastic outer casing (PVC) Housing Dimensions 230 x 45 x 48 mm (LxBxH) Weight Approx. 370 g Sensor Refer to pdf download Measuring Rollers 2 x 22 mm ball bearing rollers, total 50 mm Width of Outer Rollers 100 mm (ball bearing rollers) Reference Frame Height Adjustment 24 mm Material Anodized aluminium Reference Frame Dimensions 108 x 138 mm Weight Approx. 1.8 Kg Tension Ranges Model Range Resolution KXE-20K 0.50 - 20.00 daN 0.01 daN KXE-50K 0.5 - 50.0 daN 0.1 daN Operation Swivel the lever in direction to the handle to move the reference frame with the support rollers upwards. Hold the measuring head over the yarn group, so that it runs parallel to the measuring feeler and the support rollers. Shove the measuring roller through the yarn group, turn the measuring head by 90° and swivel the lever forward Related Products Tension Inspect Data Transfer & Analysis Program Data can be viewed and analyzed in TensionInspect or transferred to Excel Selectable sample rates and scalable trend graph "x" and "y" axis Downloads KXE Warp Tension Meter -Data Sheet KXE Warp Tension Meter - Dimensions KXE Warp Tension Meter -Instruction Manual KXE Warp Tension Meter -Memory Modes Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/kxe-warp-tension-meter-p-1600.html Thu, 13 Jan 2022 16:12:45 +0000 USD 1600 1000 KXE https://www.abqindustrial.net/store/images/KXE.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/136-3-scf-dc-thin-wire-tension-sensor-p-1599.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1599 ]]>For use in Closed Force System Applications ONLY Tension Ranges up to 100Kg / 220Lbs Built-in Diameter Compensation from 0.1 - 5.5 mm (0.004" - 0.217") 4 ranges available - Ranges up to 3 kN (675 lbs)  Material Diameters - 0.1 - 5.5 mm (0.004" - 0.217")  The 136-3-SCF-DC is especially-designed for use in Closed Force System (CFS) applications, where both ends of the material are fixed. This sensor is designed so the cable will pass under the 1st roller and over the center and last roller. This design applies a minimal break angle of the material over the center sensing roller minimizing the error caused by the presence of the tension sensor With traditional 3-Roller systems where the material travels under/over the rollers in the illustration above, a significant error is generated by the presence of the tension sensor increasing the tension dramatically --- as soon as the sensor is installed. The unique design concept of 136-3-SCF-DC eliminates this problem and provides the only accurate means of measuring tension in these types of applications. The accuracy of this sensor is further enhanced by its built-in diameter compensator adjustment. The operator simply adjusts the diameter compensator to equal the diameter of the process material being measured and the calibration is automatically adjusted for highest accuracy. The typical measuring error is less than 1%. Kit Contents 136-3-SCF-DC Thin Wire Tension Sensor Yarns & Filaments Brake Cables Aircraft Cables Architectures Cables Wires / Cables up to 5mm diameter Features Built-in Diameter Compensator for material diameters 0.1 - 5.5 mm (0.004" - 0.217") Minimal sensor influence on the tension by utilizing the smallest deflection angle possible High accuracy and reproducibility Small angle of material bending, therefore No damage of the material Very low additional tension during measurement 190 mm clearence required along the length of the process material to place tension meter Applications: Tension Measurement: Thin stay ropes and cables Thin static wires Thin pre-loaded wire ropes, steel wire ropes Aircraft support cables Overhead cables Range of application: String tension of musical instruments Wire EDM machines Airplane manufacturing Downloads 136-3-SCF-DC Thin Wire Tension Sensor- Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/136-3-scf-dc-thin-wire-tension-sensor-p-1599.html Thu, 13 Jan 2022 16:08:23 +0000 USD 1599 1000 136-3-SCF-DC https://www.abqindustrial.net/store/images/1363SCFDC.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-132-precision-tension-meter-p-1598.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1598 ]]>Precision Tension Meter 7 up to 300 g The Digitens 132 Precision Tension Meter are equipped with easy-turning guides, running on ball bearings, were developed especially to measure tensile forces in fine, sensitive and elastic materials Features For measuring sensitive and elastic yarns, rubber threads, healds, hollow fibers, fine wires and magnetic tapes very small deflection angle of 15° minimum parasitic influences on the product being measured reproducible measuring results even when dealing with difficult products such as elastic strands and rubber thread for speeds up to 1200 m/min 3 ball-bearing aluminium rollers with V-groove, root diameter 2mm minimum deflection of the product being measured Ranges Model Range   Model Range 132-10 0 - 10g 132-100 0 - 100g 132-20 0 - 20g 132-200 0 - 200g 132-30 0 - 30g 132-300 0 - 300g 132-50 0 - 50g     Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes 125-S-HDI Hand-Held Tension Sensor Ideal for high-strength, high denier yarns and fibers running at linear speeds up to 5000 m/min Special plasma-coated steel provides a ceramic-like coating with special "dimpled" surface structure which minimizes surface contact between the running yarn and the Non-rotating guide and sensor pins Downloads 132 Precision Tension Meter- Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/digitens-132-precision-tension-meter-p-1598.html Fri, 12 Apr 2024 18:48:12 +0000 USD 1598 Digitens 1000 132 https://www.abqindustrial.net/store/images/132-Precision.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/mst-tension-meter-with-motorized-take-up-p-1597.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1597 ]]>Yarn Tension Meter For measuring and adjusting the tension of sewing machines to get best and highest quality stitched seams 4 Ranges Yarn tension meter with motorized take-up fixture for measuring and adjusting the tension of sewing machines to get best and highest quality stitched seams. Therefore e. g. yarn breaks can be adjusted under constant conditions (speed of the thread). To control the tension at sewing machines as well as the take-off tension of shuttles. Kit Contents MST Tension Meter With Motorized Take-Up Suction cup base / post AC adapter / charger Instruction Manual Carrying Case Features Storage of last, average, MAX MIN, PEAK-MAX, PEAK-MIN values as well as statistical analysis (average value) during a user-selected period Motorized take-up fixture to have constant speed of the thread 8 meters/min Suction-cup base for positioning the unit on the work plate when tension is measured at the sewing machine RS-232 output for batch download or real-time data transfer to TensionInspect Software TensionInspect Software and RS-232 cable are offered as options. INQUIRE. MST-200, MST-500 and MST-1000 can operate from disposable 9V battery or using AC-Adapter MST-2000 requires use of AC-Adapter (supplied) and can/t be powered by internal battery as the Motor draws too much current and requires continuous connection to AC-Power source Specifications Accuracy ±0.5 % from measuring value ±1 digit or better Overload 20 % full scale, without accuracy guarantee Overload protection 100% Measuring frequency Max. 5 kHz Damping Moving averaging Display 4 digit, 11 mm high Display update time 2 times/s Memory Last, average, MAX, MIN, PEAK-MAX, PEAK-MIN Output signal Analog: 0 - 2 V DC, linearized, conversion rate 30 Hz Digital: RS 232 (9600, 8, N, 1) Vacuum base Adjustable height for measuring position above working plate 120 to 220 mm Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply LI-Ion 9V Battery (disposable) or 12 V AC Adapter for 230 V AC, option 115 V AC Housing Materials Aluminium Ranges Model Range Factory Calibration Material Take-Up-Speed MST-200 1 - 200 g or cN PA: 0.20 mm Ø 8 meters/min MST-500 1 - 500 g or cN PA: 0.20 mm Ø 8 meters/min MST-1000 1 - 1000 g or cN PA: 0.30 mm Ø 8 meters/min MST-2000 1 - 2000 g or cN PA: 0.50 mm Ø 8 meters/min Standard Roller Tension Inspect Data Transfer & Analysis Program Data can be viewed and analyzed in TensionInspect or transferred to Excel Selectable sample rates and scalable trend graph "x" and "y" axis MKM Mechanical Tension Meter Motorized take up wheel for constant take-up speed (refer to range table for take up speed) Handle can be reversed for using the instrument comfortable in all positions Downloads MST Tension Meter with Motorized Take-Up - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/mst-tension-meter-with-motorized-take-up-p-1597.html Mon, 26 Jun 2023 18:57:24 +0000 USD 1597 1000 MST https://www.abqindustrial.net/store/images/MST.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/137-4-tension-sensor-p-1596.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1596 ]]>Handheld Precision Tension Measurement 6 ranges 0 - 100 g up to 0 - 5 kg 6 Ranges 0 - 100 g up to 0 - 5 kg The design of this measuring head was selected to satisfy the special needs of the optical fibers industry. In the field of research and quality control itsapplications range from the crucible to re-reeling stations, from the extrusion process through cable jacketing and twisting machines, etc Features for measurement of optical fibres, sensitive wires up to 3.5mm Ø easy-running pulleys with precision bearings; with polished, large diameter contact surface gentle on the material; easy to thread even while the process is running effective overload protection means high availability for customer operations very small angle of contact, only 5° fiber is not diverted from its path high precision and excellent long-term stability Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes Downloads 137-4 Tension sensor - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/137-4-tension-sensor-p-1596.html Thu, 13 Jan 2022 16:08:24 +0000 USD 1596 1000 137-4 https://www.abqindustrial.net/store/images/137-4.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/pt-100-circular-knitting-tension-meter-p-1595.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1595 ]]>Pocket Tension Meter for Circular Knitting Applications with Speed and Length Meter Measuring Range: 0.5 - 100.0 grams or cN  The PT-100 digital tension meter is designed for measurement of low tensions of fibers, yarns. etc. typically found on circular knitting machines etc. It is battery-powered and pocket-sized for convenient storage and features and extremely small measuring head for applications with limited access space It uses a unique 180 degree material wrap to provide for accurate readings while the machine is in operation. Easy Slide-In material threading by cone shaped guide roler and turning the instrument 180 degrees. Kit Contents PT-100 Circular Knitting Tension Meter AC adapter with 3 country adapters (EU/USA/UK) Instruction Manual Carrying Case Features Continuous automatic "zero setting" in all measuring positions insures highest accuracy and repeatability Adjustable electronic damping provides a more steady value as compared to constantly fluctuation tension values V-Grooved Ball-bearing guide rollers with measuring head width of 24 mm (outer distance of guide rollers) Rollers are hard coated aluminum for speeds up to 2,000 m/min Compact aluminum housing is rugged and features an easy to read LCD Display NIST-Traceable Calibration Certificate & Test Report is optionally available User-set measuring units of Grams or cN and can be used in right or left hand as desired Rechargeable battery provides approx. 40 hours of continuous use Each instrument is individually calibrated for highest accuracy and is CE Certified Specifications Accuracy ±1.5 % full scale ±1 digit Overload protection 200% full scale Measuring units cN, gr user-switchable Measuring principle Strain gauge full bridge loadell Damping Adjustable electronic damping, averaging Display LCD 3 ½ digits, 9 mm high Display update rate 2 times per second Auto power off After 3 minutes off non use Temperature range 10 - 45 ºC Air humidity 85 % RH, max. Power supply Lithium Polymer Rechargeable Battery (approx. 40 hours continous use, charging time approx. 3.5 h) with Charger 100 - 240 V AC with country adapters (EU/USA/UK) Housing material Aluminium Dimensions 141 x 36 x 22 mm (LxWxH) Weight, net (gross) Approx. 170 g (approx. 500 g) Ranges Model PT-100 Range 0.5 - 100.0 gram or cN Calibration Material PA: 0.12 mm Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/pt-100-circular-knitting-tension-meter-p-1595.html Thu, 13 Jan 2022 16:12:46 +0000 USD 1595 1000 PT-100 https://www.abqindustrial.net/store/images/PT-100.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/pt-100-l-pocket-tension-meter-for-circular-knitting-with-speed-and-length-meter-p-1594.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1594 ]]>Pocket Tension Meter for Circular Knitting Applications with Speed and Length Meter Measuring ranges 0.5 - 100.0 g Measuring Range: 0.5 - 100.0 grams or cN  The PT-100-L digital tension meter is designed for measurement of low tensions of fibers, yarns. etc. typically found on circular knitting machines etc. The PT-100-L is also capable of measuring the speed and length of the yarn/fiber from each feeder using the supplied magnetic sensor. It is battery-powered and pocket-sized for convenient storage and features and extremely small measuring head for applications with limited access space. Easy Slide-In material threading by cone shaped guide roler and turning the instrument 180 degrees. Kit Contents PT-100-L Pocket Tension Meter for Circular Knitting AC adapter with 3 country adapters (EU/USA/UK) Certificate of Compliance with the order 2.1 according EN 10204 free of charge Instruction Manual Carrying Case Features Continuous automatic "zero setting" in all measuring positions insures highest accuracy and repeatability Adjustable electronic damping to provide steady tension readings V-Grooved Ball-bearing guide rollers with measuring head width of 24 mm (outer distance of guide rollers) Rollers are hard coated aluminum for speeds up to 2,000 m/min Compact aluminum housing is rugged and features an easy to read LCD Display PT-100-L is supplied with a magnetic sensor to allow measurement of length for preset number of machine revolutions NIST-Traceable Calibration Certificate & Test Report is optionally available User-set measuring units of Grams or cN and can be used in right or left hand as desired Rechargeable battery provides approx. 40 hours of continuous use Each instrument is individually calibrated for highest accuracy and is CE Certified Specifications Accuracy ±1.5 % full scale ±1 digit Length measuring: ±0.5 % and ±1 digit Overload protection 200% full scale Measuring units cN, gr, m/min, in/min, m, in switchable Measuring principle Strain gauge full bridge loadell Damping Adjustable electronic damping, averaging Display LCD 3 ½ digits, 9 mm high Display update rate 2 times per second Auto power off After 3 minutes off non use Temperature range 10 - 45 ºC Air humidity 85 % RH, max. Power supply LiPo accumulator (approx. 40 h continous use, charging time approx. 3.5 h) and Lithium Polymer Rechargeable Battery (approx. 40 hours continous use, charging time approx. 3.5 h) with Charger 100 - 240 V AC with country adapters (EU/USA/UK) Housing material Aluminium Dimensions 141 x 36 x 22 mm (LxWxH) Weight, net (gross) Approx. 170 g (approx. 500 g) Ranges Model PT-100-L ange 0.5 - 100.0 gram or cN Measuring Range Speed 0 - 1999 m/min Measuring Range Length 0 - 1999 m Calibration Material PA: 0.12 mm Downloads PT-100-L Pocket Tension Meter for Circular Knitting with Speed and Length Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-digital-c-98_43/pt-100-l-pocket-tension-meter-for-circular-knitting-with-speed-and-length-meter-p-1594.html Thu, 13 Jan 2022 16:13:58 +0000 USD 1594 1000 PT-100-L https://www.abqindustrial.net/store/images/PT-100-L.jpg https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200b-c-positector-200-b-probe-only-ultrasonic-coating-thickness-gage-p-1593.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1593 ]]>DeFelsko PRB200B-C Positector PRB200B Probe Ultrasonic Coating Thickness Gages for Non-Metal Substrates. Measuring Range: 0.5 - 40 mils (13 - 1000 µm) Display Sold Separately The DeFelsko PRB200B-C Positector 200 B Probe non-destructively measures a wide variety of applications using proven ultrasound technology. The PosiTector PRB200B-C model measures polymer coating on wood, plastic, etc. Conforms to ASTM D6132 and ISO 2808 FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector 200 Frequently Asked Questions Related Products DeFelsko PosiTector 200  Ultrasonic Coating Thickness Gauge Ultrasonic Coating Thickness Gauge for wood, concrete, plastic and more Separate Probe Bluetooth Printer PRINTERBT For use with the: PosiTector 6000, PosiTector 200, PosiTector SPG, PosiTector RTR H, PosiTector RTR 3D, PosiTector DPM, PosiTector IRT, PosiTector SST, PosiTector UTG, PosiTector SHD, PosiTector BHI Downloads DeFelsko PRB200B-C Positector 200 B Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- 200 B Ordering Guide DeFelsko PRB200B-C Positector 200 B Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Full Instruction Manual DeFelsko PRB200B-C Positector 200 B Probe Only Ultrasonic Coating Thickness Gage for Non-Metal Substrates- Literature Accessories for DeFelsko Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/coating-inspection-c-97/defelsko-positector-200-c-97_112/defelsko-prb200b-c-positector-200-b-probe-only-ultrasonic-coating-thickness-gage-p-1593.html Fri, 21 Oct 2022 13:18:57 +0000 USD 1593 DeFelsko 995 PRB200B https://www.abqindustrial.net/store/images/PRB200B.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/zd2-economical-tension-meter-for-fibers-yarns-and-fine-wires-p-1590.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1590 ]]>Mechanical Tension Meter for Fibers, Yarns and Fine Wires up to 300g 6 Ranges, 3-30 g up to 20-300 g Handy Plastic Housing Standard V-Grooved Rollers Precision movement and light-weight, hard plastic housing makes the Type Z Series ideal for accurately checking the operating or static tensions of a wide variety of process material including delicate yarns,fibers, filaments, wires, etc. Features A trigger-operated, roller-shifting mechanism and exclusive snare-guide automatically guide the moving filament into the roller V-grooves eliminating breaks and snags. Front filament loading permits the operator to observe the filament, rollers and dial at all times. NIST-Traceable calibration available. Each instrument is individually calibrated with each scale hand marked to provide the highest reading accuracy. Roller guides are rated for speeds up to 2000 m/min or, optionally, 5000 m/min. Supplied in an attractive foam-fitted carrying case Specifications Accuracy ±1% of Full Scale or ±1 graduation mark on scale Outer roller distance:c: 33 mm (1.5") Diameter of Dial 54 mm (2.13") Dimensions 150 x 120 x 30 mm (5.9" x 4.7" x 1.2") Weight 230 g (8.2 oz.) Roller Material Standard - Hard coated aluminum See DX2 specifications Maximum Linear Speed Standard - 2000 meters/min Optional - 3500 meters/min (K) Optional - 5000 meters/min (U) Other Options Calibration for horizontal material path (rollers pointing down)(D) Memory pointer Optional Accessories ZF2-ZD2-CALKIT - Calibration Cover for ZF2/ZD3 with 2 wrenches Ranges Model Range Measuring Head Width* Calibration Material** ZD2-30 3-30 g 63 mm PA: 0.12 mm ⌀ ZD2-50 5-50 g 63 mm PA: 0.12 mm ⌀ ZD2-100 10-100 g 63 mm PA: 0.12 mm ⌀ ZD2-150 20-150 g 63 mm PA: 0.12 mm ⌀ ZD2-200 20-200 g 63 mm PA: 0.12 mm ⌀ ZD2-300 20-300 g 63 mm PA: 0.20 mm  Other tension ranges available on request. * Width of filament guide ** Suitable for 95 % of applications - PA = Polyamide Monofilament Downloads ZD2 Economical Tension Meter for Fibers, Yarns and Fine Wires - Instruction Manual ZD2 Economical Tension Meter for Fibers, Yarns and Fine Wires - Data Sheet ZD2 Economical Tension Meter for Fibers, Yarns and Fine Wires - How to Measure Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/zd2-economical-tension-meter-for-fibers-yarns-and-fine-wires-p-1590.html Mon, 24 Jun 2024 18:35:12 +0000 USD 1590 1000 ZD2 https://www.abqindustrial.net/store/images/ZD2.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/zf2-tension-meter-for-fibers-yarns-and-fine-wires-dial-faces-p-1589.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1589 ]]>Mechanical Tension Meter for low Tension Limited Access Fibers, Yarns and Fine Wires up to 100g 7 Ranges, 1-5 g up to 10-100 g Handy Plastic Housing Miniature Rollers Precision movement and light-weight, hard plastic housing makes the Type Z Series ideal for accurately checking the operating or static tensions of a wide variety of process material including delicate yarns, fibers, filaments, wires, etc Features A trigger-operated, roller-shifting mechanism and exclusive snare-guide automatically guide the moving filament into the roller V-grooves eliminating breaks and snags. Front filament loading permits the operator to observe the filament, rollers and dial at all times. NIST-Traceable calibration available ZF2 roller guides are rated for speeds up to 900 m/min or, optionally, up to 2000 m/min. Each instrument is individually calibrated with each scale hand marked to provide the highest reading accuracy Supplied in an attractive foam-fitted carrying case Specifications Accuracy ±1% of Full Scale or ±1 graduation mark on scale Outer roller distance:c: 22 mm (0.87") Diameter of Dial 54 mm (2.13") Dimensions 150 x 120 x 30 mm (5.9" x 4.7" x 1.2") Weight 210 g (7.5 oz.) Roller Material Standard - Hard-coated aluminum Optional - Phenolic Plastic Maximum Linear Speed Standard - 900 meters/min Optional - 2000 meters/min (K) Other Options Calibration for horizontal material path (rollers pointing down)(D) Memory pointer Optional Accessories ZF2-ZD2-CALKIT - Calibration Cover for ZF2/ZD3 with 2 wrenches Ranges Model Range Measuring Head Width* Calibration Material** ZF2-5 1-5 g 43 mm Filament: 25 tex ZF2-10 1-10 g 43 mm Filament: 25 tex ZF2-12 1-12 g 43 mm Filament: 25 tex ZF2-20 2-20 g 43 mm Filament: 25 tex ZF2-30 3-30 g 43 mm PA: 0.12 mm ⌀ ZF2-50 5-50 g 43 mm PA: 0.12 mm ⌀ ZF2-100 10-100 g 43 mm PA: 0.12 mm ⌀ Downloads ZF2 - Tension Meter for Fibers, Yarns and Fine Wires - Instruction Manual ZF2 - Tension Meter for Fibers, Yarns and Fine Wires - Data Sheet ZF2 - Tension Meter for Fibers, Yarns and Fine Wires - How to Measure Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/zf2-tension-meter-for-fibers-yarns-and-fine-wires-dial-faces-p-1589.html Mon, 24 Jun 2024 18:35:11 +0000 USD 1589 1000 ZF2 https://www.abqindustrial.net/store/images/ZF2.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/kxb-warp-tension-meter-p-1588.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1588 ]]>Warps Frame rests on warp while center pin scoops up ends for measurement A reference frame makes it easy to scoop up the selected number of ends for measurement and keeps the unit perpendicular while it rests on the warp. K10, K30 & EX ranges are supplied with a 10 mm sensing pin. For the 200 and 500 range codes select either a 17 or 34 mm sensing pin Kit Contents KXB Warp Tension Meter Instruction manual Carrying case Features Width of the sensing pin 10 mm (17mm and 34 mm optionally available) Finger Support: We recommend mounting a finger support for higher tension ranges Roller shifting mechanism ensure easy acquisition of the running material Large reference frame (15 x 17 cm) is placed on the warp threads allowing the safest and most accurate mesaurements possible Designed to retain the peak value as tensions fluctuate. Manually reset by using the knob located in the center of the dial Specifications Accuracy ± 1% of full scale or ± 1 graduation mark on scale Diameter of Scale 41 mm Housing Material Die-cast aluminum Temperature range 50 - 113°F (10 - 45°C) Air humidity 85 % RH, max. Housing dimensions(L x W x H) 7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) Weight, net (gross) 1.2 lbs (3 lbs) Ranges K10 20-100 g 10mm K30 20-300 g 10mm EX 100-1000 g 10mm 200 200-2000 g 10mm 500 500-5000 g 10mm Operation We recommend always measuring the same number of ends, such as 5 or 10 ends (repeat of pattern) or only a single end at a time. During measurement make sure that the ends are not pulled or pressed out of their alignment Downloads KXB Warp Tension Meter - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/kxb-warp-tension-meter-p-1588.html Mon, 24 Jun 2024 18:37:19 +0000 USD 1588 1000 KXB https://www.abqindustrial.net/store/images/KXB.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/tx2-tape-tension-meter-with-rollers-point-away-from-operator-p-1587.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1587 ]]>Tapes Cylindrical rollers pointing away from the operator Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape. Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured. Tension Ranges: Refer to DX2 Data Sheet. NOTE: Starting point of low-range instruments will be higher than DX2.  Note: This model does not include a filament guide and material thickness compensator Kit Contents TX2 Tape Tension Meter Instruction manual Carrying case Features Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller) Tape rollers with contact surface from 7 mm up to 50 mm are available Roller shifting mechanism ensure easy acquisition of the running material Built-in mounting holes permit fixed installation for online use Finger Support: We recommend mounting a finger support for higher tension ranges Specifications Accuracy ± 1% of full scale or ± 1 graduation mark on scale Diameter of Scale 41 mm Maximum Speed 1000 m/min Roller Material Hardcoated aluminium Housing Material Die-cast aluminum Temperature range 50 - 113°F (10 - 45°C) Air humidity 85 % RH, max. Housing dimensions (L x W x H) 7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) Weight, net (gross) 1.2 lbs (3 lbs) Ranges Model Range Outer Roller Roller Widths TX2-50 10 - 50 g 57 7 TX2-120 20 - 120 g 57 7,10,15,20,30 TX2-200 20 - 200 g 57 7,10,15,20,30 TX2-400 20 - 400 g 57 7,10,15,20,30 TX2-1000 100 - 1000 g 57 7,10,15,20,30,36,41,50 TX2-2000 200 - 2000 g 117 7,10,15,20,30,36,41,50 TX2-5000 400 - 5000 g 117 7,10,15,20,30,36,41,50 TX2-10K 2.5 - 10 kg 117 7,10,15,20,30 TX2-20K-L 5 - 20 kg 117 7,10,15,20 Calibration to customized material: If process material differs significantly from the standard calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 15 ft. should be supplied. The complete model number include KXB plus range code, e.g. KXB-200 and 500 models add length of sensing pin, e.g. eg., KXB-200/17 Downloads TX2 Tape Tension Meter - Instruction Manual TX2 Tape Tension Meter - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/tx2-tape-tension-meter-with-rollers-point-away-from-operator-p-1587.html Mon, 24 Jun 2024 18:35:13 +0000 USD 1587 1000 TX2 https://www.abqindustrial.net/store/images/TX2.jpg https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/dx2fp-limited-access-tension-meter-with-ceramic-pins-p-1586.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1586 ]]>High Speed Filaments / Limited Access Ceramic Pins allow measuring speeds up to 6000 m/min The DX2FP features ceramics pins for measurings filaments moving at high speeds. It's long, flat fingers allow use in applications where there is limited access space or where the running filaments are close together Kit Contents DX2FP Limited Access Tension Meter with Ceramic Pins instruction manual carrying case NIST-Traceable Calibration Certificate & Test Report is optionally available. Features Dual flanged Non-rotating ceramic pins permit line speeds up to 6000 m/min. 27 mm measuring head with outer rollers permits a narrow access "window" The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment Non-rotating ceramic pins permit line speeds up to max. 6000 m/min. Specifications Accuracy ± 1% of full scale or ± 1 graduation mark on scale Diameter of Scale 41 mm Maximum Speed 6000 m/min Roller Material Oxide ceramic Ø 5.2 mm Housing Material Die-cast aluminum Dimensions 225 x 90 x 44 mm (8.6" x 3.5" x 1.7") Ranges Model Range DX2FP-5 10 - 50 grams DX2FP-12 20 - 120 grams DX2FP-20 20 - 200 grams Pins Guide Pins Order Code Line Speed v max ...m/min Pin Material Standard 6000 Oxide ceramic Ø 5.2 mm Spare Pins Order Code Line Speed v max ...m/min Pin Material R50012 6000 Oxide ceramic Downloads DX2FP Limited Access Tension Meter with Ceramic Pins - Instructions Manual DX2FP Limited Access Tension Meter with Ceramic Pins - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-meters-mechanical-c-98_42/dx2fp-limited-access-tension-meter-with-ceramic-pins-p-1586.html Mon, 24 Jun 2024 18:38:53 +0000 USD 1586 1000 DX2FP https://www.abqindustrial.net/store/images/DX2FP.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/schaller-humimeter-pmp-moisture-meter-for-paper-p-1585.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1585 ]]>Schaller Humimeter PMP Moisture Meter for Paper Measuring range 1% to 15% , Measuring depth: 20 mm For Piles and Non-Rotating Rolls of Paper PMP-USB transfers stored data to a PC PMP-USB supplied with Free Software & Cable The Schaller Humimeter PMP Moisture Meter for Paper is ideal for uses on paper piles and non-rotating paper rolls For quality control of paper processors like printing houses, paper retailers and corrugated paper manufacturers. Measuring instrument for determination of absolute water content of paper and solid cardboard in piles or on a non-rotating roll of paper.  For the measurement at the running roll, the moisture meter PM5 is required! For the measurement of corrugated board, the moisture meter RH5 is required! Kit Contents Schaller Humimeter PMP Moisture Meter For Paper Rubber protection cover Wooden case Proof plate Batteries Features Measuring range 1% to 15% water content, depending on the material Resolution: 0.1% water content Measuring depth of 20 mm Paper temperature: 0 to +50°C / 32 to 122°F Temperature can be set to °C or °F as required Automatic temperature compensation Measurement within seconds without prior treatment of samples Hold function, automatic datalog and manual saving of results up to 10,000 logs with measuring point report Large, well-lit LC display Dimensions: 147 x 75 x 30 mm (incl. rubber protection), weight 265 g (incl. batteries) Scope of supply: moisture meter PMP with rubber protection cover, wooden case, proof plate and batteries Quick and highly accurate measurement using a non-destructive method Simple handling Small, handy, applicable everywhere on site Menu languages in English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish. Specifications Part Number Accessories and Extensions 12297 Entry of an existing characteristic curve in a moisture meter device 11217 Laboratory analysis testing for new material of our moisture meter devices 11733 Thermo printer runs by battery, industrial model, portable (only in connection with article no. 12278) Dimensions: 180 x 100 x 45 mm, weight: 0.4 kg 10600 Factory calibration certificate. Protocol documenting the calibration of material moisture meters before delivery Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/schaller-humimeter-pmp-moisture-meter-for-paper-p-1585.html Wed, 17 Nov 2021 16:12:22 +0000 USD 1585 Schaller 997 PMP https://www.abqindustrial.net/store/images/PMP-Moisture-meter-for-paper.jpg Measuring range 1% to 15% , Measuring depth: 20 mm

---

For Piles and Non-Rotating Rolls of Paper

---

PMP-USB transfers stored data to a PC

---

PMP-USB supplied with Free Software & Cable

---

]]> https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis16pk-positector-cmm-is-expansion-pack-16-pack-p-1584.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1584 ]]>DeFelsko CMMIS16PK PosiTector CMM IS Expansion Pack, 16 Pack: 16 CMM IS probes, 16 Saturated Salt Solutions, 16 Calibration Check Chambers, 16 Caps, 40 coin cell batteries Easily collect and report measurements in conformance with ASTM F2170 In Situ Concrete Moisture (RH) Meter PosiTector CMM IS (concrete moisture meter in-situ) probes and free mobile app guide users through the ASTM F2170 documentation criteria. View and record readings wirelessly with your Apple or Android smart device, or PosiTector DPM Advanced gage Kit Contents The DeFelsko PosiTector CMM IS 16PK In Situ Concrete Moisture (RH) Meter Kit includes everything needed for testing: 16 CMM IS probes 16 Saturated Salt Solutions 16 Calibration Check Chambers 16 Caps 32 Stackable Probe Extensions 40 coin cell batteries *Add additional probes as required Features  Simple Easily collect and report RH measurements in conformance with ASTM F2170 No need to open hole or remove the cap. Probes remain powered on for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ. Combined sleeve and probe design simplifies the ASTM F2170 installation process. Does not require consumables. Uses common coin cell batteries Accurate Rapid response precision probes provides accurate, repeatable readings Cal Check function automatically determines whether a probe is reading within tolerance Certificate of Calibration showing traceability to NIST included Test and document in-situ concrete moisture levels in full accordance with ASTM F2170 Durable Reusable Smart Probes Solvent, acid, oil, water and dust resistant -- weatherproof Two year warranty on probes Powerful Rapid acclimation, reduced testing time Blue LED confirms the probe is powered on and broadcasting Includes free PosiTector mobile app for analyzing and reporting data Specifications Specifications Range Accuracy Resolution Temperature 0o to 80o C ± 0.5o C 0.1o C 32o to 175o F ± 1o F 0.1o F Humidity 10 to 90% ± 2%* 0.1% > 90% ± 3%* 0.1% * 0 - 65o C (32 - 150o F) Expansion Packs (1, 4 and 16 packs available) Add additional reusable PosiTector CMM IS smart probes as required. Each pack consists of a probe, calibration check chamber, saturated salt solution, (NaCl), cap, 2 stackable probe extensions, and A-76/LR-44 coin cell batteries Replacement chambers, salt solutions, tools, caps and fins are available upon request PosiSoft Suite of Software Four FREE and unique ways to view and report your PosiTector and PosiTest data. Learn More FAQ's - Frequently Asked Questions Click to View DeFelsko PosiTector CMM IS Frequently Asked Questions Downloads DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Literature DeFelsko PosiTector CMM IS In Situ Concrete Moisture (RH) Meter - Instruction Manual DeFelsko Accessories for Inspection Instruments - Online Catalog Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-building-inspection-c-107_137/moisture-meters-for-concrete-c-107_137_156/defelsko-cmmis16pk-positector-cmm-is-expansion-pack-16-pack-p-1584.html Fri, 12 Apr 2024 17:01:55 +0000 USD 1584 DeFelsko 999 CMMIS16PK https://www.abqindustrial.net/store/images/PosiTector-CMM-IS.jpg https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/schaller-humimeter-pm5-paper-moisture-meter-p-1583.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1583 ]]>Schaller Humimeter PM5 Paper Moisture Meter Measuring range: 1% to 25% water content Resolution: 0.1% water content Measuring depth: 50 mm The Schaller Humimeter PM5 Paper Moisture Meter is ideal for paper manufacturers, paper processors and paper retailers, for a non-destructive determination of absolute moisture of paper and cardboard at warm, running paper rolls as well as at stagnant, cool rolls.  With non-contact infrared paper temperature measurement.  Non-destructive measurement through the packaging. Kit Contents Schaller Humimeter PM5 Paper Moisture Meter USB data interface module LogMemorizer measuring data recording Analyzing software on USB flash drive Rechargeable battery Plastic case with proof plate Features Measuring range: 1% to 25% water content Resolution: 0.1% water content Measuring depth: 50 mm Non-contact infrared temperature measurement with 90° optics Paper temperature for determination of water content: 0 to +80°C / 32 to 176°F Infrared temperature measurement –25 to +125°C / -13 to 257 °F Automatic temperature compensation Temperature can be set to °C or °F as required Measurement within seconds without prior treatment of samples Hold function, automatic datalog and manual saving of results for up to 10,000 measuring values with measuring point report Large, well-lit LC display Dimensions 254 x 138 x 70 mm (with rubber protection, weight 850 g Scope of supply: moisture meter PM5, moisture meter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, rechargeable battery, plastic case with proof plate Quick and highly accurate measurement using a non-destructive method Simple handling, small, handy, applicable everywhere on site Menu languages: English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish Infrared paperweb temperature measurement Moisture meter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC Rechargeable batteries Accurate determination of paper roll temperature Higher accuracy of measuring results due to temperature compensation based on infrared temperature measurement Accessories and Extensions. Specifications Part Number Accessories and Extensions 12297 Entry of an existing characteristic curve in a moisture meter device 11217 Laboratory analysis for preparation of a calibration curve for a new material for moisture meter devices 12496 Laboratory analysis for preparation of a calibration curve for a new material for moisture meter PM5 and conversion of absolute water content into relative paper moisture (max. 0 - 100%). Please indicate required measuring range! 11733 Thermo printer runs by battery, industrial model, portable Dimensions: 180 x 100 x 45 mm, weight: 0.4 kg 10600 Factory calibration certificate. Protocol documenting the calibration of material moisture meters before deliver 14098 Spare parts set: 3 pieces of measuring bows for moisture meter PM 12464 Plug power supply unit USB; output: 5VDC, USB A connector; input: 90-250VAC, EU plug, -5 to +45°C Albuquerque Industrial https://www.abqindustrial.net/store/moisture-meters-c-107/moisture-meters-for-paper-c-107_142/schaller-humimeter-pm5-paper-moisture-meter-p-1583.html Wed, 17 Nov 2021 16:13:14 +0000 USD 1583 Schaller 996 PM5 https://www.abqindustrial.net/store/images/PM5-Paper-Moisture-Meter.jpg Schaller Humimeter PM5 Paper Moisture Meter

---

Measuring range: 1% to 25% water content

---

Resolution: 0.1% water content

---

Measuring depth: 50 mm

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-replacement-ion-selective-electrode-tips-p-1582.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1582 ]]>Horiba Laqua Replacement Ion Selective Electrode Tips Replacement Ion Selective Electrode Tips. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Electrode Tips Ammonia electrode membrane caps, 3200698386 3 replacement membrane caps for 5002S-10C combination ammonia electrode Calcium ion electrode tip 7683S, 3200697414 Replacement electrode tip for combination and half-cell calcium ion electrodes Chloride ion electrode tip 7660S, 3200697411 Replacement electrode tip for combination and half-cell chloride ion electrodes Fluoride ion electrode tip 7661S, 3200693606 Replacement electrode tip for combination and half-cell fluoride ion electrodes Nitrate ion electrode tip 7681S, 3200697412 Replacement electrode tip for combination and half-cell nitrate ion electrodes Potassium ion electrode tip 7682S, 3200697413 Replacement electrode tip for combination and half-cell potassium ion electrodes Downloads Horiba LaquaReplacement Ion Selective Electrode Tips- Brochure Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-replacement-ion-selective-electrode-tips-p-1582.html Mon, 23 Aug 2021 20:30:25 +0000 USD 1582 Horiba 1000 Tips https://www.abqindustrial.net/store/images/Electrode%20Tips.jpg Horiba Laqua Replacement Ion Selective Electrode Tips

---

Replacement Ion Selective Electrode Tips

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6582s-10c-potassium-ion-electrode-combination-3200697409-p-1581.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1581 ]]>Horiba Laqua 6582S-10C Potassium Ion Electrode (Combination), # 3200697409 Temperature Range: 0 - 50 ºC pH Range: pH 5 - 11 (3.9 mg/L K+) Accuracy: ±2% The Horiba Laqua 6582S-10C Potassium Ion Electrode (Combination) is an Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.39 - 39,000 mg/L K+ 1 x 10-5 - 1 mol/L K+ Temperature Range 0 - 50 ºC pH Range pH 5 - 11 (3.9 mg/L K+) Accuracy ± 2% Internal Electrode Ag/AgCl  Internal Solution 1 mol/L NaCl Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 150mm (length), 16.5mm (diameter) Wetted Part Materials PVC, PSU Slope 53 to 62 mV/decade Selection Coefficient Rb+ = 0.4, Cs+ = 3, NH4+ = 70 Li+, Na+, Mg2+, Ca2+, Sr2+, Ba2+ = over 1000 Package Contents 2 pcs. Potassium Ion Electrode Tips 1000 mg/L Potassium Ion Standard Solution (50ml) 100 mg/L Potassium Ion Standard Solution (50ml) Potassium Ionic Strength Adjustor (50ml) Potassium Ion Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual Accessories and Solutions 7682S Potassium Ion Electrode Tip 500-K-IFS Potassium Ion Electrode Filling Solution (500ml) 500-K-SL 100 mg/L Potassium Ion Standard Solution (500ml) 500-K-SH 1000 mg/L Potassium Ion Standard Solution (500ml) 500-K-ISA Potassium Ionic Strength Adjustor (500ml Downloads Horiba Laqua 6582S-10C Combination Potassium Ion Electrode, 3200697409 - Brochure Horiba Laqua 6582S-10C Combination Potassium Ion Electrode, 3200697409 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6582s-10c-potassium-ion-electrode-combination-3200697409-p-1581.html Mon, 23 Aug 2021 18:55:25 +0000 USD 1581 Horiba 998 6582S-10C https://www.abqindustrial.net/store/images/6582S-10C.jpg Horiba Laqua 6582S-10C Potassium Ion Electrode (Combination), # 3200697409

---

Temperature Range: 0 - 50 ºC

---

pH Range: pH 5 - 11 (3.9 mg/L K⁺)

---

Accuracy: ±2%

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6581s-10c-nitrate-ion-electrode-combination-3200697408-p-1580.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1580 ]]>Horiba Laqua 6581S-10C Nitrate Ion Electrode (Combination), # 3200697408 Temperature Range: 0 - 50 ºC pH Range: pH 3 - 7 (62 mg/L NO3-) Accuracy: ±2% The Horiba Laqua 6581S-10C Nitrate Ion Electrode (Combination) is an Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.62 - 62,000 mg/L NO3- 1 x 10-5 - 1 mol/L NO3- Temperature Range 0 - 50 ºC pH Range pH 3 - 7 (62 mg/L NO3-) Accuracy ± 2% Internal Electrode Ag/AgCl  Internal Solution 2 mol/L (NH4)2SO4 Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 150mm (length), 16.5mm (diameter) Wetted Part Materials PVC, PSU Slope -53 to-62 mV/decade Selection Coefficient ClO4-, I- = Not acceptable Br- = 2, NO2- = 3, Cl- = 300 HCO3-, H2PO4-, SO42- = over 1000 Package Contents 2 pcs Nitrate Ion Electrode Tips 1000 mg/L Nitrate Ion Standard Solution (50ml) 100 mg/L Nitrate Ion Standard Solution (50ml) Nitrate Ionic Strength Adjustor (50ml) Nitrate Ion Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual Accessories and Solutions 7681S Nitrate Ion Electrode Tip 500-NO3-IFS Nitrate Ion Electrode Filling Solution (500ml) 500-NO3-SL 100 mg/L Nitrate Ion Standard Solution (500ml) 500-NO3-SH 1000 mg/L Nitrate Ion Standard Solution (500ml) 500-NO3-ISA Nitrate Ionic Strength Adjustor (500ml) Downloads Horiba Laqua 6581S-10C Combination Nitrate Ion Electrode, 3200697408 - Brochure Horiba Laqua 6581S-10C Combination Nitrate Ion Electrode, 3200697408 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6581s-10c-nitrate-ion-electrode-combination-3200697408-p-1580.html Mon, 23 Aug 2021 18:48:07 +0000 USD 1580 Horiba 997 6581S-10C https://www.abqindustrial.net/store/images/6581S-10C.jpg Horiba Laqua 6581S-10C Nitrate Ion Electrode (Combination), # 3200697408

---

Temperature Range: 0 - 50 ºC

---

pH Range: pH 3 - 7 (62 mg/L NO₃^-)

---

Accuracy: ±2%

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6561s-10c-fluoride-ion-electrode-combination-3200693774-p-1579.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1579 ]]>Horiba Laqua 6561S-10C Fluoride Ion Electrode (Combination), # 3200693774 Temperature Range: 0 - 50 ºC pH Range: pH 5 - 8 (0.1 - 1000 mg/L F-) Accuracy: ±2% The Horiba Laqua 6561S-10C Fluoride Ion Electrode (Combination) is an Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.02 - 19,000 mg/L F- Temperature Range 0 - 50 ºC pH Range pH 5 - 8 (0.1 - 1000 mg/L F-) Accuracy ± 2% Internal Electrode Ag/AgCl  Internal Solution 3.3 mol/L KCl Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 150mm (length), 16.5mm (diameter) Wetted Part Materials LaF3, PSU Slope -53 to-62 mV/decade Selection Coefficient Possible interference when multiply-charged ion (e.g., Al3+, Fe3+) coexisted and foamed the complex  Package Contents Fluoride Ion Electrode Tip 1000 mg/L Fluoride Ion Standard Solution (50ml) 100 mg/L Fluoride Ion Standard Solution (50ml) Fluoride Ionic Strength Adjustor (50ml) Fluoride Ion Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual Accessories and Solutions 7661S Fluoride Ion Electrode Tip 500-F-IFS Fluoride Ion Electrode Filling Solution (500ml) 500-F-SL 100 mg/L Fluoride Ion Standard Solution (500ml) 500-F-SH 1000 mg/L Fluoride Ion Standard Solution (500ml) 500-F-TISAB Fluoride Ionic Strength Adjustor (500ml) Downloads Horiba Laqua 6561S-10C Combination Fluoride Ion Electrode, 3200693774 - Brochure Horiba Laqua 6561S-10C Combination Fluoride Ion Electrode, 3200693774 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6561s-10c-fluoride-ion-electrode-combination-3200693774-p-1579.html Mon, 23 Aug 2021 18:45:36 +0000 USD 1579 Horiba 999 6561S-10C https://www.abqindustrial.net/store/images/6561S-10C.jpg Horiba Laqua 6561S-10C Fluoride Ion Electrode (Combination), # 3200693774

---

Temperature Range: 0 - 50 ºC

---

pH Range: pH 5 - 8 (0.1 - 1000 mg/L F^-)

---

Accuracy: ±2%

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6560s-10c-chloride-ion-electrode-combination-3200697407-p-1578.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1578 ]]>Horiba Laqua 6560S-10C Chloride Ion Electrode (Combination), # 3200697407 Temperature Range: 0 - 50 ºC pH Range: pH 5 - 11 (4.0 mg/L Ca2+) Accuracy: ±4% The Horiba Laqua 6560S-10C Chloride Ion Electrode (Combination) is an Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.35 - 35,000 mg/L Cl- 1 x 10-5 - 1 mol/L Cl- Temperature Range 0 - 50 ºC pH Range pH 3 - 11 (350 mg/L Cl-) Accuracy ± 2% Internal Electrode Ag/AgCl  Internal Solution 1 mol/L KNO3 Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 150mm (length), 16.5mm (diameter) Wetted Part Materials PVC, PSU, AgCl Slope -53 to -62 mV/decade Selection Coefficient S2O32-, S2-, I-, Ag+, Hg2+ = Not acceptable SCN- = 0.3, MnO4- = 0.1, Br- = 0.03 NO3-, F-, HCO3-, SO42-, PO42-= 1000 Package Contents Chloride Ion Electrode Tip 1000 mg/L Chloride Ion Standard Solution (50ml) 100 mg/L Chloride Ion Standard Solution (50ml) Chloride Ionic Strength Adjustor (50ml) Chloride Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Water-resistant abrasive sheet Manual Accessories and Solutions 7660S Chloride Ion Electrode Tip 500-CL-IFS Chloride Ion Electrode Filling Solution (500ml) 500-CL-SL 100 mg/L Chloride Ion Standard Solution (500ml) 500-CL-SH 1000 mg/L Chloride Ion Standard Solution (500ml) 500-CL-ISA Chloride Ionic Strength Adjustor (500ml) Downloads Horiba Laqua 6560S-10C Combination Chloride Ion Electrode, 3200697407 - Brochure Horiba Laqua 6560S-10C Combination Chloride Ion Electrode, 3200697407 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6560s-10c-chloride-ion-electrode-combination-3200697407-p-1578.html Mon, 23 Aug 2021 18:43:26 +0000 USD 1578 Horiba 999 6560S-10C https://www.abqindustrial.net/store/images/6560S-10C.jpg Horiba Laqua 6560S-10C Chloride Ion Electrode (Combination), # 3200697407

---

Temperature Range: 0 - 50 ºC

---

pH Range: pH 5 - 11 (4.0 mg/L Ca²₊)

---

Accuracy: ±4%

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6583s-10c-calcium-ion-electrode-combination-3200697410-p-1577.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1577 ]]>Horiba Laqua 6583S-10C Calcium Ion Electrode (Combination), # 3200697410 Temperature Range: 0 - 50 ºC pH Range: pH 5 - 11 (4.0 mg/L Ca2+) Accuracy: ±4% The Horiba Laqua 6583S-10C Calcium Ion Electrode (Combination) is an Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.4 - 40,080 mg/L Ca2+ 1 x 10-5 - 1 mol/L Ca2+ Temperature Range 0 - 50 ºC pH Range pH 5 - 11 (4.0 mg/L Ca2+) Accuracy ± 4% Internal Electrode Ag/AgCl  Internal Solution 3 mol/L NH4Cl Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 150mm (length), 16.5mm (diameter) Wetted Part Materials PVC, PSU Slope 25 - 32 mV/decade Selection Coefficient Fe3+ = 0.1, Fe2+, Zn2+= 1, Sr2+ = 50 Ni2+, Cu2+ = 70, Co2+ = 350 Mn2+ = 500, Mg2+ = 1,000 Na+, K+, Ba2+, NH4+ = over 1000 Package Contents 2 pcs. Calcium Ion Electrode Tips 1000 mg/L Calcium Ion Standard Solution (50ml) 100 mg/L Calcium Ion Standard Solution (50ml) Calcium Ionic Strength Adjustor (50ml) Calcium Electrode Filling Solution (50ml) Syringe Dropper Protective Pipe Manual Accessories and Solutions 7683S Calcium Ion Electrode Tip 500-CA-IFS Calcium Ion Electrode Filling Solution (500ml) 500-CA-SL 100 mg/L Calcium Ion Standard Solution (500ml) 500-CA-SH 1000 mg/L Calcium Ion Standard Solution (500ml) 500-CA-ISA Calcium Ionic Strength Adjustor (500ml) Downloads Horiba Laqua 6583S-10C Combination Calcium Ion Electrode, 3200697410- Brochure Horiba Laqua 6583S-10C Combination Calcium Ion Electrode, 3200697410 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-6583s-10c-calcium-ion-electrode-combination-3200697410-p-1577.html Mon, 23 Aug 2021 18:57:30 +0000 USD 1577 Horiba 999 6583S-10C https://www.abqindustrial.net/store/images/6583S-10C.jpg Horiba Laqua 6583S-10C Calcium Ion Electrode (Combination), # 3200697410

---

Temperature Range: 0 - 50 ºC

---

pH Range: pH 5 - 11 (4.0 mg/L Ca²₊)

---

Accuracy: ±4%

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-5002s-10c-ammonia-ion-electrode-combination-3200698386-p-1576.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1576 ]]>Horiba Laqua 5002S-10C Ammonia Electrode (Combination), # 3200698386 Temperature Range: 0 - 50 ºC pH Range: ≥ pH 12 Accuracy: ±2% The Horiba Laqua 5002S-10C Ammonia Electrode (Combination) is a Ion Selective Electrode -the reference electrode and ion sensing electrode are built in one body. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications Measurement Range 0.01 - 18000 mg/L NH4+ 5 x 10-7 to 1 mol/L NH4+ Temperature Range 0 - 50 ºC pH Range ≥ pH 12 Accuracy ±2% Internal Electrode Ag/AgCl Internal Solution 0.1 mol/L NH4Cl Liquid Junction Movable sleeve Connector & Cable Length BNC, 1m Dimensions 161mm (length), 15mm (diameter) Wetted Part Materials PTFE, PVC, PSU Slope -54 to -62 mV/decade Package Contents 3 pcs. Membrane Caps 1000 mg/L Ammonium Ion Standard Solution (50ml) 100 mg/L Ammonium Ion Standard Solution (50ml) Ammonia Electrode Filling Solution (50ml) Syringe Dropper Manual Accessories and Solutions NH3 Electrode Membrane Caps Ammonia Electrode Tips 500-NH3-IFS Ammonia Electrode Filling Solution (500ml) 500-NH4-SL 100 mg/L Ammonium Ion Standard Solution (500ml) 500-NH4-SH 1000 mg/L Ammonium Ion Standard Solution (500ml) 500-NH3-ISA Ammonia Ionic Strength Adjustor (500ml) Downloads Horiba Laqua5002S-10C Combination Ammonia Ion Electrode, 3200698386- Brochure Horiba Laqua5002S-10C Combination Ammonia Ion Electrode, 3200698386 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ion-electrodes-c-104_77/horiba-laqua-5002s-10c-ammonia-ion-electrode-combination-3200698386-p-1576.html Sat, 17 Jun 2023 16:52:56 +0000 USD 1576 Horiba 999 5002S-10C https://www.abqindustrial.net/store/images/5002S-10C.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9480-10c-long-touph-electrode-for-large-containers-glass-body-3200611628-p-1575.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1575 ]]>Horiba Laqua 9480-10C Long ToupH Electrode, for Large Containers and Long Test Tubes, Glass Body, # 3200611628 pH Range:0 to 14 Temperature Range: 0 to 100°C Liquid Junction: Ceramic The Horiba Laqua 9480-10C Long ToupH Electrode is a refillable pH electrode with integrated temperature sensor ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body. Features Electrode: 283mm length, 8mm diameter Constructed with responsive glass that is 10x stronger than JIS standards Waterproof, Pb-free glass. Specifications pH Range 0 to 14 Temperature Range 0 to 100°C Liquid Junction Ceramic Cable 1m Connector BNC Overall Length 283mm Diameter 8mm Filling Solution 525-3 or 300 (3.33M KCl) Downloads Horiba Laqua 9480-10C Combination pH Electrodes, for large containers and long test tubes, Glass Body 3200611628 - Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9480-10c-long-touph-electrode-for-large-containers-glass-body-3200611628-p-1575.html Wed, 21 Sep 2022 15:29:27 +0000 USD 1575 Horiba 1000 9480-10C https://www.abqindustrial.net/store/images/9480-10C_.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9481-10c-sleeve-touph-electrodes-viscous-and-non-aqueous-samples-3200611631-p-1574.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1574 ]]>Horiba Laqua 9481-10C Sleeve ToupH Electrode, for Viscous and Non-aqueous Samples, Glass Body, # 3200611631 pH Range:0 to 14 Temperature Range: 0 to 60°C Liquid Junction: Movable Sleeve The Horiba Laqua 9481-10C Sleeve ToupH Electrode, for Viscous and Non-aqueous Samples, Glass Body, refillable pH electrode is ideal to measure samples as low as 50µL. Features Compatible with extremely small sample containers (e.g., microtubes) Temperature sensor is placed beside the bulb for quick response Waterproof Specifications pH Range 0 to 14 Temperature Range 0 to 60°C Liquid Junction Movable Sleeve Cable 1m Connector BNC Overall Length 203mm Diameter 12mm Filling Solution 525-3 or 300 (3.33M KCl) Downloads Horiba Laqua 9481-10C Combination pH Electrodes,for viscous and non-aqueous samples, Glass Body 3200611631, Glass Body 3200611627 - Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9481-10c-sleeve-touph-electrodes-viscous-and-non-aqueous-samples-3200611631-p-1574.html Fri, 22 Jul 2022 19:28:44 +0000 USD 1574 Horiba 999 9481-10C https://www.abqindustrial.net/store/images/9481-10C_.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9418-10c-micro-touph-electrode-for-low-volume-samples-glass-body-3200611627-p-1573.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1573 ]]>Horiba Laqua 9418-10C Micro ToupH Electrode, for Low-volume Samples, Glass Body, # 3200611627 pH Range:0 to 14 Temperature Range: 0 to 60°C Liquid Junction: Ceramic The Horiba Laqua 9418-10C Micro ToupH Electrode, Glass Body is ideal to measure samples as low as 50µL. Features Compatible with extremely small sample containers (e.g., microtubes) Temperature sensor is placed beside the bulb for quick response Waterproof Specifications pH Range 0 to 14 Temperature Range 0 to 60°C Liquid Junction Ceramic Cable 1m Connector BNC Overall Length 185mm Diameter 3mm Filling Solution 525-3 or 300 (3.33M KCl) Downloads Horiba Laqua 9418-10C Combination pH Electrodes, for low-volume samples, Glass Body 3200611627- Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9418-10c-micro-touph-electrode-for-low-volume-samples-glass-body-3200611627-p-1573.html Tue, 24 Aug 2021 12:50:46 +0000 USD 1573 Horiba 1000 9418-10C https://www.abqindustrial.net/store/images/9418-10C_.jpg Horiba Laqua 9418-10C Micro ToupH Electrode, for Low-volume Samples, Glass Body, # 3200611627

---

pH Range:0 to 14

---

Temperature Range:0 to 60°C

---

Liquid Junction: Ceramic

---

]]> https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9415-10c-standard-touph-electrode-general-laboratory-application-3200611623-p-1572.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1572 ]]>Horiba Laqua 9415-10C Standard ToupH Electrode, for General Laboratory Application, Glass Body, # 3200611623 pH Range:0 to 14 Temperature Range: 0 to 100°C Liquid Junction: Ceramic The Horiba Laqua 9415-10C Standard ToupH Electrode, for General Laboratory Application, Glass Body is recommended for a wide range of applications, including pH buffers and aqueous test solutions. Features Offers quick stability and drift reduction Constructed with responsive glass that is 10x stronger than JIS standards The dome-shaped tip provides strength in all directions, reducing damage concerns Waterproof, Pb-free glass Specifications pH Range 0 to 14 Temperature Range 0 to 100°C Liquid Junction Ceramic Cable 1m Connector BNC Overall Length 198mm Diameter 12mm Filling Solution 525-3 or 300 (3.33M KCl) Downloads Horiba Laqua 9415-10C Combination pH Electrodes, for general laboratory application, Glass Body 3200611623- Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9415-10c-standard-touph-electrode-general-laboratory-application-3200611623-p-1572.html Wed, 21 Sep 2022 15:24:28 +0000 USD 1572 Horiba 1000 9415-10C https://www.abqindustrial.net/store/images/9415-10C_.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9425-10c-combination-ph-electrode-for-general-purpose-use-plastic-body-3200611625-p-1571.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1571 ]]>Horiba Laqua 9425-10C Combination pH Electrode, for General-purpose Use, Plastic Body, # 3200611625 pH Range:0 to 14 Temperature Range: 0 to 100°C Liquid Junction: Ceramic The Horiba Laqua 9425-10C Combination pH Electrode, Plastic Body is recommended for general-purpose use. Specifications pH Range 0 to 14 Temperature Range 0 to 100°C Liquid Junction Ceramic Cable 1m Connector BNC Overall Length 150mm Diameter 16mm Filling Solution 525-3 or 300 (3.33M KCl) Downloads Horiba Laqua 9425-10C Combination pH Electrodes, for general-purpose use, Plastic Body 3200611625- Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9425-10c-combination-ph-electrode-for-general-purpose-use-plastic-body-3200611625-p-1571.html Wed, 21 Sep 2022 15:29:25 +0000 USD 1571 Horiba 999 9425-10C https://www.abqindustrial.net/store/images/9425-10C_.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9651-10d-3-in-1-ph-electrode-field-testing-plastic-body-3200642020-p-1570.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1570 ]]>Horiba Laqua 9651-10D 3-in-1 pH Electrode, Field Testing, Plastic Body, # 3200642020 pH Range: 0 to 14 Temperature Range: 0 to 80 °C Liquid Junction: Porous sintered polyethylene Horiba Laqua 9651-10D 3-in-1 pH Electrode plastic-body, gel-filled pH electrode with integrated temperature sensor is ideal for field testing. The body is durable and no need to refill the electrode. HORIBA's superior electrode technology has produced unparalleled tough pH glass bulbs and unique flat sensors. Electrodes have different designs to cater a wide range of applications - from pure water to complex samples. Specifications pH Range 0 to 14 Temperature Range 0 to 80°C Liquid Junction Porous sintered polyethylene Temperature Sensor Integrated Cable Length 1m Connectors BNC, phono jack Overall Length 150mm Diameter 16mm Downloads Horiba Laqua 9651-10D 3-in-1 pH, for field testing, Plastic Body 3200642020 - Brochure Horiba Laqua pH Electrode Selection Guide Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-ph-electrodes-c-104_76/horiba-laqua-9651-10d-3-in-1-ph-electrode-field-testing-plastic-body-3200642020-p-1570.html Wed, 21 Sep 2022 15:29:33 +0000 USD 1570 Horiba 992 9651-10D https://www.abqindustrial.net/store/images/9651-10D_.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ds-72g-benchtop-water-quality-conductivity-meter-3200575136-p-1569.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1569 ]]>This item has been discontinued Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter and Electrode Stand 3200575136 Display easy to understand value and functions menus Switch between digital real time graphs or analogue displays during measurement with just the flick of a finger Two channels can be displayed simultaneously Features LAQUA’s large capacitance touch screen panel  LAQUA DS-72 meter measures conductivity, resistivity, salinity, total dissolved solids (TDS) and temperature parameters and complies with industrial pharmacopoeia standards (JIS, USP, EP, JP and CP). The meters’ auto diagnostic function allows the user to make sure that the instruments will always give high performance and reliable measurements. Fully GLP/GMP compliant, the LAQUA can be connected to an external printer. To ensure traceability, all results are recorded together with sample name, user ID and calibration information. We offer a comprehensive range of conductivity electrodes adapted to all type of application and sample. Recognised for their stability and longevity, HORIBA’s electrodes provide accurate measurement in all conditions. LAQUA’s large capacitance touch screen panel The display is easy to understand and functions menu is shown Switch between digital real time graphs or analogue displays during measurement with just flick of a finger Full on-screen support on the meter via an electronic user guide with colour pictures that can be called-up at any time, a problem-solving guide for calibration and measurement Functions Easy navigation for meter and display available for electrode condition check Full support for various pharmaceutical pure water guidelines (USP/EP/JP/CP) Auto-hold function for calibration and measurement Simultaneous connection to a GLP/GMP compatible printer and computer Digital memory - maximum 2,000 sets of measurement data can be recorded USB-PC communication and USB memory  Multi-language support (Japanese, English, Chinese, Korean) Specifications Conductivity Range k=100 m-1：0.000 mS/m~19.99 S/m k=10 m-1：0.0 μS/m~1.999 S/m k=1000m-1：0.00 mS/m~199.9 S/m Method 2 AC Bipolar Resolution 0.05% of full scale Repeatability ±0.5% ±1 digit Selectable Unit Yes Distilled Water Temperature Conversion Yes Periodical Check Yes JIS/CP/JP/USP/EP Pharmaceutical Water Application Yes Salinity Range 0.00 to 80.00 ppt (0.000 to 8.000%) Method Conversion from conductivity Resolution 0.01 ppt (0.001%) Salt Concentration Calibration Yes Resistivity Range k=100 m-1：0.00 Ω・m~199.9 kΩ・m k=10 m-1：0.0 Ω・m~1.999 MΩ・m k= 1000 m-1：0.000 Ω・m~19.99 kΩ・m Method Conversion from conductivity Resolution 0.05% F.S. Repeatability ±0.5%F.S. ±1 digit TDS Range 0.01 mg/L to 1000 g/L Method Conversion from conductivity Resolution 0.01 mg/L Temperature Range -30.0 to 130.0°C Resolution 0.1℃ Repeatability ±0.1°C ±1 digit Input BNC, phono Output USB, RS232C, Analog Data Memory 2000 Data Search Yes ID Input Yes Display Touch Screen Color LCD Languages English, Japanese, Chinese, Korean Navigation Function Yes Temperature Compensation Auto / Manual Auto-Hold Setting Yes Password Setting Yes Software Upgrade Function Yes Operating Temperature 0 to 45°C Power Requirement AC adptor, 100-240V 50/60Hz Dimensions 170(W) x 174(D) x 73(H) mm Weight 700g Kit Contents Measures conductivity/TDS/Resistivity/Salinity/Temp, Single Channel meter, up to 4 point calibration, includes meter, electrode stand and instruction manual Photo Gallery Related Products 3552-10D Platinum/Platinum black, glass-body, k=1.0 conductivity electrode with integrated temperature sensor Conductivity Standard Solution Kit 103-S 84 uS/cm Conductivity Solution at 25°C 250ml 1413 uS/cm Conductivity Solution at 25°C 500ml 12.88 mS/cm Conductivity Solution at 25°C 250ml 111.8 mS/cm Conductivity Solution at 25°C 250ml Downloads Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter 3200575136 - Electrodes Accessories Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter 3200575136 - Command-Reference Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter 3200575136 - Instruction Manual Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter 3200575136 - Quick Manual Horiba LAQUA DS-72G Benchtop Water Quality Conductivity Meter 3200575136 - Colour Touchscreen Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ds-72g-benchtop-water-quality-conductivity-meter-3200575136-p-1569.html Tue, 03 Oct 2023 22:37:45 +0000 USD 1569 Horiba 1000 DS-72G https://www.abqindustrial.net/store/images/Horiba-LAQUA-DS72G-Benchtop-Water-Quality-Conductivity-Meter.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-74-3200575130-benchtop-ph-ion-orp-conductivity-resistivity-salinity-tds-meter-p-1568.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1568 ]]>Horiba LAQUA F-74 # 3200575130 Benchtop pH / Ion / ORP / Conductivity / Resistivity / Salinity / TDS Meter Display easy to understand value and functions menus Switch between digital real time graphs or analogue displays during measurement with just the flick of a finger Two channels can be displayed simultaneously The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA F-74 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA F-74 Benchtop pH Ion ORP Conductivity Resistivity Salinity TDS Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction manual Features Display easy to understand value and functions menus Switch between digital real time graphs or analogue displays during measurement with just the flick of a finger Full on-screen support on the meter via an electronic user guide with colour pictures that can be called up at any time, featuring problem solver guide for calibration or measurement Functions Easy navigation for main unit and electrode inspections Two channels can be displayed simultaneously Periodic inspection mode JIS/Pharmacopeias/Digital Simulator Full support for various country pharmaceutical pure water guidelines  Customizable auto-hold function for calibration and measurement Simultaneous connection to a GLP/GMP compatible and PC Digital memory - maximum 2,000 sets of measurement data can be recorded USB-PC communication and USB memory Multi-language support (Japanese, English, Chinese, Korean) Specifications Model LAQUA F-74 Dual Channel pH/ORP/Ion/EC/Res/TDS/Sal/Temp (⁰C) pH Range -2.000 to 20.000 pH Resolution 0.01 / 0.001 pH Accuracy ± 0.001 pH Calibration Points Up to 5 Buffer Options USA / NIST / NIST2 / China / Custom ORP Range ± 1999.9 mV Resolution 0.1 mV Accuracy ± 0.2 mV IonRange 0.000 μg/L to 9999 g/L (mol/L) Resolution 4 significant digits Accuracy ± 0.3% of full scale Calibration Points Up to 5 EC Range 0.000 μS/cm to 19.99 mS/cm (k=0.1) 0.00 μS/cm to 199.9 mS/cm (k=1) 0.0 μS/cm to 1.999 S/cm (k=10) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale (± 1.5% of full scale > 18.0 mS/cm) Reference Temperature 15 to 30 ºC (adjustable) Temperature Coefficient 0.00 to 10.00 % (adjustable) Cell Constants 0.1 / 1.0 / 10.0 Calibration Points 4 (Auto / Manual) Measurement Units Auto Ranging / Manual μS/cm, mS/cm, S/m TDS Range 0.01 mg/L to 1000 g/L Resolution 0.01 mg/L Accuracy ± 0.1% of full scale TDS Curves EN27888 / Linear (0.40 to 1.0) / 442 / NaCl Resistivity Range 0.00 kΩ.cm to 199.9 MΩ•cm (k=0.1) 0.000 kΩ.cm to 19.99 MΩ•cm (k=1) 0.0 Ω.cm to 1.999 MΩ•cm (k=10) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale (± 1.5% of full scale > 1.80 MΩ•cm) Salinity Range 0.00 to 80.00 ppt / 0.000 to 8.000 % Resolution 0.01 ppt / 0.001 % Accuracy ± 0.2% of full scale Salinity Curves NaCl / Seawater Temperature Range ­30.0 to 130.0 ⁰C Resolution 0.1 ⁰C Accuracy ± 0.4 ⁰C Calibration Option Yes Navigation Function Yes Memory 2000 Auto Data-Logging Yes Data Search Yes Custom Printing Yes Real Time Clock Yes Date / Time Stamp Yes Sample ID Input Yes Operator ID Input Yes Password Setting Yes Auto Stable / Auto Hold Yes Offset / Slope Display Yes (independent acid and alkaline slopes depending on calibration) Calibration Alarm Limit Yes Electrode Status On screen display Diagnostic Messages Yes Display Touchscreen color graphic LCD / dual channel display Languages English / Japanese / Chinese / Korean / Vietnamese Inputs Dual BNC, dual phono, DC socket Outputs USB, RS232C, analog output Power Requirements AC adaptor 100 -­ 240V, 50/60 Hz Electrode Stand Stand-alone Weight 700g Dimensions 170 (W) x 174 (D) x 73 (H) mm Related Products 9615S-10D Standard ToupH Electrode p/n 3200585428 / 3200366539 3552-10D Platinum/Platinum black, glass-body, k=1.0 conductivity electrode with integrated temperature sensor pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Conductivity Standard Solution Kit 103-S 84 uS/cm Conductivity Solution at 25°C 250ml 1413 uS/cm Conductivity Solution at 25°C 500ml 12.88 mS/cm Conductivity Solution at 25°C 250ml 111.8 mS/cm Conductivity Solution at 25°C 250ml Downloads Horiba LAQUA F-74 Benchtop Water Quality Conductivity pH/ION/COND Meter 3200575130 - Electrodes Accessories Horiba LAQUA F-74 Benchtop Water Quality Conductivity pH/ION/COND Meter 3200575130 - Command-Reference Horiba LAQUA F-74 Benchtop Water Quality Conductivity pH/ION/COND Meter 3200575130 - Instruction Manual Horiba LAQUA F-74 Benchtop Water Quality Conductivity pH/ION/COND Meter 3200575130 - Quick Manual Horiba LAQUA F-74 Benchtop Water Quality Conductivity pH/ION/COND Meter 3200575130 - Colour Touchscreen Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-74-3200575130-benchtop-ph-ion-orp-conductivity-resistivity-salinity-tds-meter-p-1568.html Wed, 07 Feb 2024 19:18:39 +0000 USD 1568 Horiba 1000 F-74G https://www.abqindustrial.net/store/images/Horiba-LAQUA-F-74G-Benchtop-Meter.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-73-3200575123-benchtop-ph-ion-orp-meter-p-1567.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1567 ]]>Horiba LAQUA F-73 # 3200575123 Benchtop pH / Ion / ORP Meter Display easy to understand value and functions menus Switch between digital real time graphs or analogue displays during measurement with just the flick of a finger Easy navigation for main unit and electrode inspections The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA F-73 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA F-73 Benchtop pH / Ion / ORP Meter Protection cover Power adaptor with 6 plugs (US, EU, UK, Australia / New Zealand, Korea, China) Instruction manual Features Bench meter with large touchscreen color graphic LCD Easy-to-clean, elegant body GLP/GMP compliant, compatible with LAQUA 21 CFR Part 11 Software Switchable display - digital, graph, and analog Single-touch operations - tap, flick, and drag Smart navigation - on-screen support for calibration, application, inspection and troubleshooting via electronic user guide with coloured pictures 2-Channel display and simultaneous measurements Auto data log capable Customizable printout and auto-hold function for calibration and measurement Simultaneous connection to a compatible printer and computer Simultaneous data storage to meter and USB flash drive Built-in memory stores up to 2,000 data with sample ID for easy reference Data settings allow users to search (by date, parameter, or sample ID), view, delete, and even copy data from meter to USB flash drive Data output via USB to computer or USB flash drive or via RS232C to computer or printer Multi-language support (Japanese, English, Chinese, Korean, and Vietnamese) Meter password setting and up to 25 users registrations 2 years meter warranty Specifications Model LAQUA F-73 Dual Channel pH/ORP/Ion/Temp (⁰C) pH Range -2.000 to 20.000 pH Resolution 0.01 / 0.001 pH Accuracy ± 0.001 pH Calibration Points Up to 5 Buffer Options USA / NIST / NIST2 / China / Custom ORP Range ± 1999.9 mV Resolution 0.1 mV Accuracy ± 0.2 mV IonRange 0.000 µg/L to 9999 g/L (mol/L) Resolution 4 significant digits Accuracy ± 0.3% of full scale Calibration Points Up to 5 Temperature Range ­30.0 to 130.0 ⁰C Resolution 0.1 ⁰C Accuracy ± 0.4 ⁰C Calibration Option Yes Navigation Function Yes Memory 2000 Auto Data-Logging Yes Data Search Yes Custom Printing Yes Real Time Clock Yes Date / Time Stamp Yes Sample ID Input Yes Operator ID Input Yes Password Setting Yes Auto Stable / Auto Hold Yes Offset / Slope Display Yes (independent acid and alkaline slopes depending on calibration) Calibration Alarm Limit Yes Electrode Status On screen display Diagnostic Messages Yes Display Touchscreen color graphic LCD Languages English / Japanese / Chinese / Korean / Vietnamese Inputs Dual BNC, dual phono, DC socket Outputs USB, RS232C, analog output Power Requirements AC adaptor 100 -­ 240V, 50/60 Hz Electrode Stand Stand-alone Weight 700g Dimensions 170 (W) x 174 (D) x 73 (H) mm Related Products 9615S-10D Standard ToupH Electrode p/n 3200585428 / 3200366539 pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA F-73 Benchtop Water Quality pH/IONwith Meter Colour Touch Screen 3200575123 - Electrodes Accessories Horiba LAQUA F-73 Benchtop Water Quality pH/IONwith Meter Colour Touch Screen 3200575123 - Command-Reference Horiba LAQUA F-73 Benchtop Water Quality pH/IONwith Meter Colour Touch Screen 3200575123 - Instruction Manual Horiba LAQUA F-73 Benchtop Water Quality pH/IONwith Meter Colour Touch Screen 3200575123 - Quick Manual Horiba LAQUA F-73 Benchtop Water Quality pH/IONwith Meter Colour Touch Screen 3200575123 - Colour Touchscreen Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-73-3200575123-benchtop-ph-ion-orp-meter-p-1567.html Wed, 07 Feb 2024 19:18:35 +0000 USD 1567 Horiba 1000 F-73G https://www.abqindustrial.net/store/images/Horiba-LAQUA-F-73G-Benchtop-Meter.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-72-3200575120-benchtop-ph-orp-ion-p-1566.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1566 ]]>Horiba LAQUA F-72 # 3200575120 Benchtop pH / ORP / Ion Display easy to understand value and functions menus Switch between digital real time graphs or analogue displays during measurement with just the flick of a finger Easy navigation for main unit and electrode inspections The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA F-72 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA F-72 Benchtop pH / ORP / Ion Integrated electrode stand Protection cover AC Power Adaptor Instruction manual Features Bench meter with large touchscreen color graphic LCD Easy-to-clean, elegant body GLP/GMP compliant, compatible with LAQUA 21 CFR Part 11 Software Switchable display - digital, graph, and analog Single-touch operations - tap, flick, and drag Smart navigation - on-screen support for calibration, application, inspection and troubleshooting via electronic user guide with coloured pictures Auto data log capable Customizable printout and auto-hold function for calibration and measurement Simultaneous connection to a compatible printer and computer Simultaneous data storage to meter and USB flash drive Built-in memory stores up to 2,000 data with sample ID for easy reference Data settings allow users to search (by date, parameter, or sample ID), view, delete, and even copy data from meter to USB flash drive Data output via USB to computer or USB flash drive or via RS232C to computer or printer Multi-language support (Japanese, English, Chinese, Korean, and Vietnamese) Meter password setting and up to 25 users registrations 2 years meter warranty  Specifications Model LAQUA F-72 pH/ORP/Ion/Temp (°C) pH Range -2.000 to 20.000 pH Resolution 0.01 / 0.001 pH Accuracy ± 0.001 pH Calibration Points Up to 5 Buffer Options USA / NIST / NIST2 / China / Custom ORP Range ± 1999.9 mV Resolution 0.1 mV Accuracy ± 0.2 mV IonRange 0.000 µg/L to 9999 g/L (mol/L) Resolution 4 significant digits Accuracy ± 0.3% of full scale Calibration Points Up to 5 Temperature Range ­30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Navigation Function Yes Memory 2000 Auto Data-Logging Yes Data Search Yes Custom Printing Yes Real Time Clock Yes Date / Time Stamp Yes Sample ID Input Yes Operator ID Input Yes Password Setting Yes Auto Stable / Auto Hold Yes Offset / Slope Display Yes (independent acid and alkaline slopes depending on calibration) Calibration Alarm Limit Yes Electrode Status On screen display Diagnostic Messages Yes Display Touchscreen color graphic LCD Languages English / Japanese / Chinese / Korean / Vietnamese Inputs BNC, phono, DC socket Outputs USB, RS232C, analog output Power Requirements AC adaptor 100 ­ 240V, 50/60 Hz Electrode Stand Stand-alone Weight 700g Dimensions 170 (W) x 174 (D) x 73 (H) mm Related Products 9615S-10D Standard ToupH Electrode p/n 3200585428 / 3200366539 pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120 - Electrodes Accessories Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120 - Command-Reference Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120 - Instruction Manual Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120 - Quick Manual Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touchscreen 3200575120 - Colour Touchscreen Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-f-72-3200575120-benchtop-ph-orp-ion-p-1566.html Wed, 07 Feb 2024 19:20:40 +0000 USD 1566 Horiba 1000 F-72G https://www.abqindustrial.net/store/images/Horiba-LAQUA-F-72G-Benchtop-Water-Quality-Meter.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-c-101_29/shimpo-fg-m6flmqr20u-film-grip-0-8-inch-quick-release-p-1565.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1565 ]]>Price: $ 675.00 Shimpo FG-M6FLMQR20U Quick Release Film Grip, 45 lb (20 kg) Max. Capacity 0.8" (20 mm) width, 0.08" (2 mm) Max. Opening The Shimpo FG-M6FLMQR20U Quick Release Film Grip is perfect for those with repetitive test requirements. With their quick release lever, operators can quickly change out materials under test and be ready for the next test in seconds. Features Quick Release Film Grip Each unit has a 0.8" (20 mm) Wide gripping surface Can accept materials up to approximately 1/32" (2 mm) thick Specifications Max. Opening Width 1/32" (2 mm) Max. Capacity 45 lb (20 kg) Downloads Shimpo FG-M6FLMQR20U Film Grip 0.8" Quick Release - Dimensions Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-c-101_29/shimpo-fg-m6flmqr20u-film-grip-0-8-inch-quick-release-p-1565.html Fri, 06 Jan 2023 20:01:20 +0000 USD 1565 Shimpo 1000 FG-M6FLMQR20U https://www.abqindustrial.net/store/images/FG-M6FLMQR20U-01.jpg https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-c-101_29/shimpo-fg-m6cbh60u-carton-box-pull-hook-grip-p-1564.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1564 ]]>Price: $ 185.00 Shimpo FG-M6CBH60U Carton Box Pull Hook Grip 56 lb (25 kg) capacity The Shimpo FG-M6CBH60U Carton Box Pull Hook Grip is simple, yet specialized force gauge attachment for testing the required force to open cardboard boxes and similar packages.  Each unit possesses a 2.3” (60 mm) width, and can work up to a maximum load of 56 lb (250 N). This hook has a M6 female connection, enabling connection with any M6 compatible device.  Grips and attachments sold individually (not in pairs). Specifications Range 2.3" (60 mm) Capacity 56 lbs (25 kg) Thread M6 Photo Gallery Dimensions Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/force-gauge-attachments-c-101_29/shimpo-fg-m6cbh60u-carton-box-pull-hook-grip-p-1564.html Fri, 06 Jan 2023 20:01:22 +0000 USD 1564 Shimpo 1000 FG-M6CBH60U https://www.abqindustrial.net/store/images/FG-M6CBH60U-01.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-pc1100-3200647410-benchtop-ph-orp-conductivity-resistivity-salinity-tds-meter-p-1563.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1563 ]]>Horiba LAQUA PC1100 # 3200647410 Benchtop Dual Channel pH / ORP / Conductivity / Resistivity / Salinity / TDS / Temperature Meter Dual channel / display Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers Switchable pH resolution - 0.1, 0.01, 0.001 pH The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA PC1100 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents LAQUA PC1100 Benchtop pH / ORP / Conductivity / Resistivity / Salinity / TDS Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction Manual Features Dual channel / display Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers Switchable pH resolution - 0.1, 0.01, 0.001 pH Offset and slope display Automatic / Manual temperature compensation and temperature calibration function Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Conductivity and total dissolved solids (TDS) conversion Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Two (2) salinity calibration curves: NaCl, Seawater  Auto log data; Built-in memory can store up to 1000 data Real-time clock and date / time stamp Auto shut-off (programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable measurement Calibration alarm (programmable: 1 to 400 days) Custom black and white static LCD RS232 and USB output for connecting to computer or printer Security (password setting) 2 years meter warranty Specifications Model LAQUA PC1100 Dual Channel pH/ORP/EC/Res/TDS/Sal/Temp (°C) pH Range -2.000 to 20.000 pH Resolution 0.1 / 0.01 / 0.001 pH Accuracy ± 0.003 pH Calibration Points Up to 5 Buffer Options USA / NIST / Custom ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Conductivity (EC) Range 0.000 μS/cm to 20.00 mS/cm (k=0.1) 0.00 μS/cm to 200.0 mS/cm (k=1) 0.0 μS/cm to 2.000 S/cm (k=10)    Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 18.0 mS/cm  Reference Temperature 15 to 30 °C (Adjustable) Temperature Coefficient 0.00 to 10.00 % (Adjustable) Cell Constant 0.1 / 1.0 / 10.0 (Selectable) Measurement Unit μS/cm, mS/cm, S/m (Auto-ranging / Manual) Calibration Points Up to 4 (Auto / Manual) TDS Range 0.00 mg/L to 100 g/L Resolution 0.01 mg/L Accuracy ± 0.1% of full scale Calibration Curves EN27888 / 442 / Linear (0.40 to 1.00) / NaCl Resistivity Range 0.0 Ω•cm to 2.000 MΩ•cm (k=10) 0.000 kΩ•cm to 20.00 MΩ•cm (k=1) 0.00 kΩ•cm to 200.0 MΩ•cm (k=0.1) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 1.80 MΩ•cm Salinity Range 0.00 to 100.00 ppt / 0.000 to 10.000 % Resolution 0.01 ppt / 0.001 % Accuracy ± 0.2% of full scale Calibration Curves NaCl / Seawater Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 999 Auto Log Data Yes Real-time Clock Yes Date / Time Stamp Yes Auto-Shut Off Yes (Programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Calibration Alarm Yes (Programmable: 1 to 400 days) Display Custom black and white static LCD, Dual Channel Inputs Dual BNC, dual phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrodep/n 3200585428 / 3200366539 9382-10D Conductivity Cells (Submersible Type) 9382-10D p/n 3014046709 / 9096000300 Universal power adaptor with 6 plugs 6 plugs included: US, EU, UK, Australia/New Zealand, China and Korea Multi-voltage: 100 to 240 V Conductivity Standard Solution Kit 103-S 84 uS/cm Conductivity Solution at 25°C 250ml 1413 uS/cm Conductivity Solution at 25°C 500ml 12.88 mS/cm Conductivity Solution at 25°C 250ml 111.8 mS/cm Conductivity Solution at 25°C 250ml pH Sensor S010 Replacement sensor for LAQUAtwin B-711, B-712, B-713, pH-11, pH-22, and pH-33 pH 4.01 Buffer 514-4 / Y014 For LAQUAtwin B-212, B-213, B-712, B-713, pH-11, pH-22, pH-33 pH 7.00 Buffer 514-7 For LAQUAtwin pH-11, pH-22, pH-33 Downloads Horiba LAQUA PC1100 Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter with Black/White Screen 3200647410 - Series 1000 Horiba LAQUA PC1100 Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter with Black/White Screen 3200647410 - Command-Reference Horiba LAQUA PC1100 Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter with Black/White Screen 3200647410 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-pc1100-3200647410-benchtop-ph-orp-conductivity-resistivity-salinity-tds-meter-p-1563.html Wed, 07 Feb 2024 19:20:50 +0000 USD 1563 Horiba 1000 PC1100 https://www.abqindustrial.net/store/images/series1000.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-pc1100-s-3999960180-benchtop-ph-orp-conductivity-resistivity-salinity-tds-meter-kit-p-1562.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1562 ]]>Horiba LAQUA PC1100-S # 3999960180 Benchtop pH / ORP / Conductivity / Resistivity / Salinity / TDS / Temperature Meter Kit Dual channel / display Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers Switchable pH resolution - 0.1, 0.01, 0.001 pH The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA PC1100-S was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents LAQUA PC1100-S Benchtop pH / ORP / Conductivity / Resistivity / Salinity / TDS Meter 9615S-10D ToupH glass-body, refillable pH electrode with integrated temperature sensor 9382-10D plastic-body, titanium/platinum black, conductivity probe (k=1.0) with integrated temperature sensor 502-S USA pH buffers: 4.0, 7.00, 10.01 pH buffers & 3.33 M KCl (250ml each) 503-S Conductivity standards: 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm (250ml each) Data acquisition software in USB flash drive (communication cable is sold separately) Integrated electrode stand Protection cover Power adaptor with 6 plugs (US, EU, UK, Australia / New Zealand, Korea, China) Instruction manual Features Dual channel / display Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers Switchable pH resolution - 0.1, 0.01, 0.001 pH Offset and slope display Automatic / Manual temperature compensation and temperature calibration function Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Conductivity and total dissolved solids (TDS) conversion Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Two (2) salinity calibration curves: NaCl, Seawater  Auto log data; Built-in memory can store up to 1000 data Real-time clock and date / time stamp Auto shut-off (programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable measurement Calibration alarm (programmable: 1 to 400 days) Custom black and white static LCD RS232 and USB output for connecting to computer or printer Security (password setting) 2 years meter warranty Specifications Model LAQUA PC1100 Dual Channel pH/ORP/EC/Res/TDS/Sal/Temp (°C) pH Range -2.000 to 20.000 pH Resolution 0.1 / 0.01 / 0.001 pH Accuracy ± 0.003 pH Calibration Points Up to 5 Buffer Options USA / NIST / Custom ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Conductivity (EC) Range 0.000 μS/cm to 20.00 mS/cm (k=0.1) 0.00 μS/cm to 200.0 mS/cm (k=1) 0.0 μS/cm to 2.000 S/cm (k=10)    Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 18.0 mS/cm  Reference Temperature 15 to 30 °C (Adjustable) Temperature Coefficient 0.00 to 10.00 % (Adjustable) Cell Constant 0.1 / 1.0 / 10.0 (Selectable) Measurement Unit μS/cm, mS/cm, S/m (Auto-ranging / Manual) Calibration Points Up to 4 (Auto / Manual) TDS Range 0.00 mg/L to 100 g/L Resolution 0.01 mg/L Accuracy ± 0.1% of full scale Calibration Curves EN27888 / 442 / Linear (0.40 to 1.00) / NaCl Resistivity Range 0.0 Ω•cm to 2.000 MΩ•cm (k=10) 0.000 kΩ•cm to 20.00 MΩ•cm (k=1) 0.00 kΩ•cm to 200.0 MΩ•cm (k=0.1) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 1.80 MΩ•cm Salinity Range 0.00 to 100.00 ppt / 0.000 to 10.000 % Resolution 0.01 ppt / 0.001 % Accuracy ± 0.2% of full scale Calibration Curves NaCl / Seawater Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 999 Auto Log Data Yes Real-time Clock Yes Date / Time Stamp Yes Auto-Shut Off Yes (Programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Calibration Alarm Yes (Programmable: 1 to 400 days) Display Custom black and white static LCD, Dual Channel Inputs Dual BNC, dual phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrodep/n 3200585428 / 3200366539 9382-10D Conductivity Cells (Submersible Type) 9382-10D p/n 3014046709 / 9096000300 Universal power adaptor with 6 plugs 6 plugs included: US, EU, UK, Australia/New Zealand, China and Korea Multi-voltage: 100 to 240 V Conductivity Standard Solution Kit 103-S 84 uS/cm Conductivity Solution at 25°C 250ml 1413 uS/cm Conductivity Solution at 25°C 500ml 12.88 mS/cm Conductivity Solution at 25°C 250ml 111.8 mS/cm Conductivity Solution at 25°C 250ml pH Sensor S010 Replacement sensor for LAQUAtwin B-711, B-712, B-713, pH-11, pH-22, and pH-33 pH 4.01 Buffer 514-4 / Y014 For LAQUAtwin B-212, B-213, B-712, B-713, pH-11, pH-22, pH-33 pH 7.00 Buffer 514-7 For LAQUAtwin pH-11, pH-22, pH-33 Downloads Horiba LAQUA PC1100-S Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960180 - Series 1000 Horiba LAQUA PC1100-S Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960180 - Command-Reference Horiba LAQUA PC1100-S Benchtop Water Quality Dual Channel pH/ORP/Cond/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960180 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-pc1100-s-3999960180-benchtop-ph-orp-conductivity-resistivity-salinity-tds-meter-kit-p-1562.html Wed, 07 Feb 2024 19:20:49 +0000 USD 1562 Horiba 998 PC1100-S https://www.abqindustrial.net/store/images/PC1100-S.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ec-1100-3200647411-benchtop-conductivity-resistivity-salinity-tds-meter-p-1561.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1561 ]]>Horiba Laqua EC-1100 # 3200647411 Benchtop Conductivity / Resistivity / Salinity / TDS Meter Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit The Horiba LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba Laqua EC-1100 was developed as a durable meter offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Laqua EC-1100 Benchtop Conductivity / Resistivity / Salinity / TDS Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction Manual Features Automatic / manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Automatic / manual temperature compensation Temperature calibration function Resistivity, total dissolved solids (TDS), and salinity conversions from conductivity Four TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Two salinity calibration curves: NaCl, Seawater Built-in memory can store up to 500 data Auto-Hold / Auto-Stable measurement RS232C and USB outputs for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Condutivity (EC) Range 0.000 μS/cm to 20.00 mS/cm (k=0.1) 0.00 μS/cm to 200.0 mS/cm (k=1) 0.0 μS/cm to 2.000 S/cm (k=10) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 18.0 mS/cm  Reference Temperature 15 to 30 °C (Adjustable) Temperature Coefficient 0.00 to 10.00 % (Adjustable) Cell Constant 0.1 / 1.0 / 10.0 (Selectable) Measurement Unit μS/cm, mS/cm, S/m (Auto-ranging / Manual) Calibration Points Up to 4 (Auto / Manual) TDS Range 0.00 mg/L to 100 g/L Resolution 0.01 mg/L Accuracy ± 0.1% of full scale Calibration Curves EN27888 / 442 / Linear (0.40 to 1.00) / NaCl Resistivity Range 0.0 Ω•cm to 2.000 MΩ•cm (k=10) 0.000 kΩ•cm to 20.00 MΩ•cm (k=1) 0.00 kΩ•cm to 200.0 MΩ•cm (k=0.1) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 1.80 MΩ•cm Salinity Range 0.00 to 100.00 ppt / 0.000 to 10.000 % Resolution 0.01 ppt / 0.001 % Accuracy ± 0.2% of full scale Calibration Curves NaCl / Seawater Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 500 Auto-Hold / Auto-Stable Yes Cell Constant Display Yes Electrode Status On screen display Diagnostic Messages Yes Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode p/n 3200585428 / 3200366539 pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120- Electrodes Accessories Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120- Command-Reference Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120- Instruction Manual Horiba LAQUA F-72G Benchtop Water Quality pH/ORP/Ion with Meter Colour Touch Screen 3200575120- Quick Manual Horiba LAQUA F-72 Benchtop Water Quality pH/ORP/Ion with Meter Colour Touchscreen 3999960011- Colour Touchscreen Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ec-1100-3200647411-benchtop-conductivity-resistivity-salinity-tds-meter-p-1561.html Tue, 03 Oct 2023 22:17:25 +0000 USD 1561 Horiba 2 EC1100 https://www.abqindustrial.net/store/images/series1000.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ec1100-s-3999960179-benchtop-conductivity-resistivity-salinity-tds-meter-kit-p-1560.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1560 ]]>Horiba LAQUA EC1100-S # 3999960179 BenchtopConductivity / Resistivity / Salinity / TDS / Temperature Meter Kit Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA EC1100-S was developed as a durable meter offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents LAQUA LAQUA EC1100-S Conductivity / Resistivity / Salinity / TDS Meter Kit 9382-10D Plastic-body, Titanium/platinum black conductivity probe (k=1.0) wth integrated temperature sensor 503-S Conductivity Standards: 84 uS/cm, 1413 uS/cm, 12.88 mS/cm, 111.8 mS/cm (250ml each) Data acquisition software in USB flash drive (communication cable is sold separately) Integrated electrode stand Protection cover Power adaptor with 6 plugs (US, EU, UK, Australia / New Zealand, Korea, China) Instruction manual Features Automatic / manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Automatic / manual temperature compensation Temperature calibration function Resistivity, total dissolved solids (TDS), and salinity conversions from conductivity Four TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Two salinity calibration curves: NaCl, Seawater Built-in memory can store up to 500 data Auto-Hold / Auto-Stable measurement RS232C and USB outputs for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Condutivity (EC) Range 0.000 μS/cm to 20.00 mS/cm (k=0.1) 0.00 μS/cm to 200.0 mS/cm (k=1) 0.0 μS/cm to 2.000 S/cm (k=10) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 18.0 mS/cm  Reference Temperature 15 to 30 °C (Adjustable) Temperature Coefficient 0.00 to 10.00 % (Adjustable) Cell Constant 0.1 / 1.0 / 10.0 (Selectable) Measurement Unit μS/cm, mS/cm, S/m (Auto-ranging / Manual) Calibration Points Up to 4 (Auto / Manual) TDS Range 0.00 mg/L to 100 g/L Resolution 0.01 mg/L Accuracy ± 0.1% of full scale Calibration Curves EN27888 / 442 / Linear (0.40 to 1.00) / NaCl Resistivity Range 0.0 Ω•cm to 2.000 MΩ•cm (k=10) 0.000 kΩ•cm to 20.00 MΩ•cm (k=1) 0.00 kΩ•cm to 200.0 MΩ•cm (k=0.1) Resolution 0.05% of full scale Accuracy ± 0.6% of full scale; ± 1.5% of full scale > 1.80 MΩ•cm Salinity Range 0.00 to 100.00 ppt / 0.000 to 10.000 % Resolution 0.01 ppt / 0.001 % Accuracy ± 0.2% of full scale Calibration Curves NaCl / Seawater Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 500 Auto-Hold / Auto-Stable Yes Cell Constant Display Yes Electrode Status On screen display Diagnostic Messages Yes Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode p/n 3200585428 / 3200366539 pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA EC1100-S Benchtop Water Quality Conductivity/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960179 - Series 1000 Horiba LAQUA EC1100-S Benchtop Water Quality Conductivity/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960179 - Command-Reference Horiba LAQUA EC1100-S Benchtop Water Quality Conductivity/TDS/Res/Sal/Temp Meter Kit with Black/White Screen 3999960179 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ec1100-s-3999960179-benchtop-conductivity-resistivity-salinity-tds-meter-kit-p-1560.html Wed, 07 Feb 2024 19:21:55 +0000 USD 1560 Horiba 999 EC-1100-S https://www.abqindustrial.net/store/images/EC1100-S.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1300-3200647409-benchtop-ph-orp-ion-temperature-meter-p-1559.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1559 ]]>Horiba LAQUA pH-1300 # 3200647409 Benchtop pH / ORP / Ion / Temperature Meter Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01, 0.001 pH Offset and slope display The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA pH-1300 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA pH-1300 Benchtop pH / ORP / Ion / Temperature Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction Manual Features Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers Switchable pH resolutions - 0.1, 0.01, 0.001 pH Offset and slope display Automatic / Manual temperature compensation Temperature calibration function Auto-Hold / Auto-Stable measurement  Auto log data Built-in memory can store up to 999 data  Real-time clock Date / time stamping Auto shut-off (programmable: 1 to 30 minutes) Calibration alarm (programmable: 1 to 400 days) Custom black and white static LCD RS232C and USB outputs for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Model LAQUA PH1300 pH/ORP/Ion/Temperature (°C) pH Range -2.000 to 20.000 pH Resolution 0.1 / 0.01 / 0.001 pH Accuracy ± 0.003 pH Calibration Points Up to 5 Buffer Options USA / NIST / Custom ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Ion Range 0.000 µg/L to 9999 g/L Resolution 4 significant digits Accuracy ± 0.3% of full scale Calibration Points Up to 5 Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 999 Auto Log Data Yes Real-time Clock Yes Date / Time Stamp Yes Auto-Shut Off Yes (Programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Calibration Alarm Yes (Programmable: 1 to 400 days) Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode Quick stability, and reduction of drift No more worries about the timing of your measurement value readings pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA pH-1300 Benchtop Water Quality pH/ORP/Ion/Temperature (°C) Meter with Black/White Screen 3200647409 - Series 1000 Horiba LAQUA pH-1300 Benchtop Water Quality pH/ORP/Ion/Temperature (°C) Meter with Black/White Screen 3200647409 - Command-Reference Horiba LAQUA pH-1300 Benchtop Water Quality pH/ORP/Ion/Temperature (°C) Meter with Black/White Screen 3200647409 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1300-3200647409-benchtop-ph-orp-ion-temperature-meter-p-1559.html Wed, 07 Feb 2024 19:20:40 +0000 USD 1559 Horiba 999 pH-1300 https://www.abqindustrial.net/store/images/series1000.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1200-3200647408-benchtop-ph-orp-temperature-meter-p-1557.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1557 ]]>Horiba LAQUA pH-1200 # 3200647408 Benchtop pH / ORP / Temperature Meter Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display The Horiba LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA pH-1200 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA pH-1200 Benchtop pH / ORP / Temperature Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction Manual Features Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers Switchable pH resolutions - 0.1, 0.01, 0.001 pH Offset and slope display Automatic / Manual temperature compensation Temperature calibration function Auto-Hold / Auto-Stable measurement  Auto log data Built-in memory can store up to 999 data  Real-time clock Date / time stamping Auto shut-off (programmable: 1 to 30 minutes) Calibration alarm (programmable: 1 to 400 days) Custom black and white static LCD RS232C and USB outputs for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Model LAQUA PH1200 pH/ORP/Temperature (°C) pH Range -2.000 to 20.000 pH Resolution 0.1 / 0.01 / 0.001 pH Accuracy ± 0.003 pH Calibration Points Up to 5 Buffer Options USA / NIST / Custom ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 999 Auto Log Data Yes Real-time Clock Yes Date / Time Stamp Yes Auto-Shut Off Yes (Programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Calibration Alarm Yes (Programmable: 1 to 400 days) Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode Quick stability, and reduction of drift No more worries about the timing of your measurement value readings pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA pH-1200 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647408 - Series 1000 Horiba LAQUA pH-1200 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647408 - Command-Reference Horiba LAQUA pH-1200 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647408 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1200-3200647408-benchtop-ph-orp-temperature-meter-p-1557.html Wed, 07 Feb 2024 19:20:41 +0000 USD 1557 Horiba 999 pH-1200 https://www.abqindustrial.net/store/images/series1000.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1200-s-3999960177-benchtop-ph-orp-temperature-meter-kit-p-1556.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1556 ]]>Horiba LAQUA pH-1200-S # 3999960177 Benchtop pH / ORP / Temperature Meter Kit Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA pH-1200-S was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents Horiba LAQUA pH-1200-S Benchtop pH / ORP / Temperature Meter 9615S-10D ToupH glass-body, refillable pH electrode with integrated temperature sensor 502-S USA pH buffers: 4.01, 7.00, 10.01 pH buffers & 3.33 M KCl reference electrolyte (250ml each) Data acquisition software in USB flash drive (communication cable is sold separately) Integrated Electrode Stand Meter Cover Power adaptor with 6 plugs (US, EU, UK, Australia / New Zealand, Korea, China) Instruction Manual Features Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers Switchable pH resolutions - 0.1, 0.01, 0.001 pH Offset and slope display Automatic / Manual temperature compensation Temperature calibration function Auto-Hold / Auto-Stable measurement  Auto log data Built-in memory can store up to 999 data  Real-time clock Date / time stamping Auto shut-off (programmable: 1 to 30 minutes) Calibration alarm (programmable: 1 to 400 days) Custom black and white static LCD RS232C and USB outputs for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Model LAQUA PH1200 pH/ORP/Temperature (°C) pH Range -2.000 to 20.000 pH Resolution 0.1 / 0.01 / 0.001 pH Accuracy ± 0.003 pH Calibration Points Up to 5 Buffer Options USA / NIST / Custom ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 999 Auto Log Data Yes Real-time Clock Yes Date / Time Stamp Yes Auto-Shut Off Yes (Programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Calibration Alarm Yes (Programmable: 1 to 400 days) Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C, USB Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode Quick stability, and reduction of drift No more worries about the timing of your measurement value readings pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA pH-1200-S Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960177 - Series 1000 Horiba LAQUA pH-1200-S Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960177 - Command-Reference Horiba LAQUA pH-1200-S Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960177 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1200-s-3999960177-benchtop-ph-orp-temperature-meter-kit-p-1556.html Wed, 07 Feb 2024 19:22:21 +0000 USD 1556 Horiba 1 pH-1200-S https://www.abqindustrial.net/store/images/PH1200-kit.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1100-3200647407-benchtop-ph-orp-temperature-meter-p-1555.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1555 ]]>Horiba LAQUA pH-1100 # 3200647407 Benchtop pH / ORP / Temperature Meter Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display    The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA pH-1100 was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications Kit Contents LAQUA pH-1100 Benchtop pH / ORP / Temperature Meter Integrated Electrode Stand Meter Cover AC Power Adaptor Instruction Manual Features Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display Automatic / Manual temperature compensation Temperature calibration function Auto-Hold / Auto-Stable measurement Built-in memory can store up to 500 data  Custom black and white static LCD RS232C output for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Model LAQUA PH1100 pH/ORP/Temperature (°C) pH Range -2.00 to 20.00 pH Resolution 0.1 / 0.01 pH Accuracy ± 0.01 pH Calibration Points Up to 5 Buffer Options USA / NIST ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 500 Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode Quick stability, and reduction of drift No more worries about the timing of your measurement value readings pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647407 - Series 1000 Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647407 - Command-Reference Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter with Black/White Screen 3200647407 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1100-3200647407-benchtop-ph-orp-temperature-meter-p-1555.html Wed, 07 Feb 2024 19:20:48 +0000 USD 1555 Horiba 998 pH-1100 https://www.abqindustrial.net/store/images/series1000.jpg https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1100-s-3999960176-benchtop-ph-orp-temperature-meter-kit-p-1554.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1554 ]]>Horiba LAQUA pH-1100-S # 3999960176 Benchtop pH / ORP / Temperature Meter Kit Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The Horiba LAQUA pH-1100-S was developed as a durable meter offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications. Kit Contents LAQUA pH-1100- Benchtop pH / ORP / Temperature Meter 9615S-10D ToupH glass-body, refillable pH electrode with integrated temperature sensor 502-S USA pH buffers: 4.01, 7.00, 10.01 pH buffers & 3.33 M KCl reference electrolyte (250ml each) Data acquisition software in USB flash drive (communication cable is sold separately) Integrated Electrode Stand Meter Cover Power adaptor with 6 plugs (US, EU, UK, Australia / New Zealand, Korea, China) Instruction Manual Features Automatic pH calibration up to 5 points using USA or NIST buffers Switchable pH resolutions - 0.1, 0.01 pH Offset and slope display Automatic / Manual temperature compensation Temperature calibration function Auto-Hold / Auto-Stable measurement Built-in memory can store up to 500 data  Custom black and white static LCD RS232C output for connecting the meter to a compatible printer or computer Meter password setting 2 years meter warranty Specifications Model LAQUA PH1100 pH/ORP/Temperature (°C) pH Range -2.00 to 20.00 pH Resolution 0.1 / 0.01 pH Accuracy ± 0.01 pH Calibration Points Up to 5 Buffer Options USA / NIST ORP Range ± 2000 mV Resolution 0.1 mV Accuracy ± 0.2 mV Temperature Range -30.0 to 130.0 °C Resolution 0.1 °C Accuracy ± 0.4 °C Calibration Option Yes Memory Data 500 Auto-Hold / Auto-Stable Yes Offset / Slope Display Yes (Independent acid and alkaline slopes depending on calibration) Electrode Status On screen display Diagnostic Messages Yes Display Custom black and white static LCD Inputs BNC, phono, DC sockets Output RS232C Power Requirement AC adaptor, 100-240V, 50/60Hz Weight 500g Dimensions 170(L) x 174(D) x 73(H) mm Related Products 9615S-10D Standard ToupH Electrode Quick stability, and reduction of drift No more worries about the timing of your measurement value readings pH 4.01 Buffer Solution - Model No: 500-4 pH 4.01 ±0.02 Buffer Solution at 25°C 250ml pH 7.00 Buffer Solution - Model No: 500-7 pH 7.00 ±0.02 at 25°C 500ml pH 10.01 Buffer Solution - Model No: 500-10 pH 10.01 ±0.02 at 25°C 500ml Downloads Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960176 - Series 1000 Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960176 - Command-Reference Horiba LAQUA pH-1100 Benchtop Water Quality pH/ORP/Temperature (°C) Meter Kit with Black/White Screen 3999960176 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/horiba-water-quality-meters-c-104/horiba-laqua-benchtop-meters-c-104_74/horiba-laqua-ph-1100-s-3999960176-benchtop-ph-orp-temperature-meter-kit-p-1554.html Wed, 07 Feb 2024 19:20:42 +0000 USD 1554 Horiba 1000 pH-1100-S https://www.abqindustrial.net/store/images/PH1100-04.jpg