Albuquerque Industrial : RSS Products Feed :: Surface Profile Gauges https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 PCWI 0918 / 1070 Surface Profile Gauge https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/pcwi-0918-1070-surface-profile-gauge-p-41.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=41 PCWI 0918 / 1070 Surface Profile GaugeDigital Surface Profile / Roughness Needle GaugeThe PCWI 0918 / 1070 digital metric/imperial surface profile, or roughness, needle gauge is a low cost option for surface profile measurement Kit Contents PCWI 0918 / 1070 Surface Profile GaugeInstructionsCarrying Case Click image to enlarge Features Enables quick assessment of surface condition prior to coatingIt works on grit sand shot blasted and saw cut surfacesThe small size (42 mm diameter) of this surface profile gauge makes it easy to use and easy to balance on the surfaceIts design permits accuracies equivalent to an electronic surface traceGives maximum peak to average valley heightAvailable with metric and imperial unitsThis gauge can also measure the depth of pits, cracks, craters and scratches of the outer (and in some cases the inside) surfaces of steel structures, pipes and concreteWe also have available pit and crack depth gauges Specifications Measuring Range0 - 13 mm (0 - 0.5")Resolution0.001mm (0.00005")Gauge face diameter42mm (1.65")Power3V lithium button cell (CR2032)Battery Life8 - 12 monthsWorking Temperature0 to +40ºC (32 to 104ºF)Storage Temperature-10 to +60ºC (14 to 140ºF)Relative Humidity Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/pcwi-0918-1070-surface-profile-gauge-p-41.html Fri, 30 Jan 2026 12:53:21 +0000 USD 41 PCWI 923 PROFILEGAUGE60 https://www.abqindustrial.net/store/images/PCWI-0918-Surface-Profile-Gauge.jpg https://www.abqindustrial.net/store/images/additional/pcwi-0918---1070-surface-profile-gauge-1505.jpg https://www.abqindustrial.net/store/images/additional/pcwi-0918---1070-surface-profile-gauge-1504.jpg 41 77 /store/images/warranty-1-year-new.png Paint Test Equipment Surface Roughness Comparator https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-surface-roughness-comparator-p-1816.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1816 R2006 Surface Roughness Comparator GritR2007 Surface Roughness Comparator ShotCompliant to ISO 8503-1 and ISO 8503-2Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator.Surface Roughness Comparator for grit and shot-blast surface roughness comparison measurement of  blast-cleaned steel.The Surface Roughness Comparator is supplied in a protective Wallet. An X5 Illuminated Magnifier for viewing the Comparator is available as an optional extra.Compliant to ISO 8503-1 and ISO 8503-2.Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator Features When steel has been blast-cleaned, the surface consists of random irregularities with peaks and valleys that are not easily characterised. Because of this random nature, it is recommended that the profile should be identified as either angular (where grit abrasives have been used) or dimpled (where shot abrasives have been used) and that they should be graded as fine, medium or coarse using the four segments on the Comparator.Fine-grade profiles equal to segment 1 and up to but excluding segment 2.Medium-grade profiles equal to segment 2 and up to but excluding segment 3.Coarse-grade profiles equal to segment 3 and up to but excluding segment 4. Downloads Paint Test Equipment R2006. Surface Roughness Comparator Grit - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-surface-roughness-comparator-p-1816.html Sun, 21 Nov 2021 14:48:03 +0000 USD 1816 Paint Test Equipment 938 R2006 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-R2006-Surface-Comparator.jpg https://www.abqindustrial.net/store/images/additional/paint-test-equipment-surface-roughness-comparator-3502.jpg 1816 62 /store/images/warranty-1-year-new.png R2006 Surface Roughness Comparator Grit
R2007 Surface Roughness Comparator Shot
Compliant to ISO 8503-1 and ISO 8503-2
Also known as Grit Comparator, Shot Comparator Blast-cleaned Steel Comparator and Blast Comparator.
]]> Paint Test Equipment R1004 Testex Gauge Kit https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-r1004-testex-gauge-kit-p-1817.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1817 R1004. Testex GaugeIncludes Testex Tape Coarse & Testex Tape X CoarseCompliant to ISO 8503-5 and NACE SP0287Testex Gauge with the Testex Tape will measure the surface profile of blast-cleaned steel. NACE compliant Testex Tape.Compliant to ISO 8503-5 and NACE SP0287.Also known as Testex Thickness Gauge and Testex Profile Gauge Kit Contents Paint Test Equipment R1004 Testex GaugeTestex Tape X CoarseTestex Tape CoarseBurnishing ToolCalibration Certificate with traceability to UKASCarrying Case Click image to enlarge Features Testex Tape measurements are made by placing the replicated area between the anvils and gently lower the moveable anvil onto the filmThe reading can now be taken, giving you the average peak-to-valley height of the blasted profile.Gauge accuracy ±1%FSD Downloads Paint Test Equipment R1004 Testex Gauge - Instrutions Manual Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/paint-test-equipment-r1004-testex-gauge-kit-p-1817.html Sun, 21 Nov 2021 14:44:21 +0000 USD 1817 Paint Test Equipment 987 R1004 https://www.abqindustrial.net/store/images/Paint-Test-Equipment-R1004-Testex-Gauge.jpg https://www.abqindustrial.net/store/images/additional/paint-test-equipment-r1004-testex-gauge-3504.jpg https://www.abqindustrial.net/store/images/additional/paint-test-equipment-r1004-testex-gauge-3505.jpg 1817 13 /store/images/warranty-1-year-new.png R1004. Testex Gauge.
Includes Testex Tape Coarse & Testex Tape X Coarse
Compliant to ISO 8503-5 and NACE SP0287.
]]> TIME3200 Surface Roughness Tester TR200 https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/time3200-surface-roughness-tester-tr200-p-1931.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1931 The TIME3200 Surface Roughness Tester is designed to measure in Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk and Rmr unitsThe TIME3200 Surface Roughness Tester is designed to measure in Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk and Rmr units. It is commonly used for testing roughness during the manufacturing processes as well as in test labs. Kit Contents TIME3200 Surface Roughness Tester TR200Main unitTS100 standard pickupRoughness test plate RaBattery ChargerProtection NoseSteel supportDataviewCommunication cableInstruction manual Click image to enlarge Features High accuracy inductive pickupLarge LCD display with backlightPickup stylus position indicatorRS232 data outputStorage and review function for up to 15 groups data and graphsConform to ISO standard, compatible with DIN, ANSI and JIS standardPowered by Li-Ion Battery Specifications Roughness parametersRa, Rz, Ry, Rq, Rt, Rp, Rmax, Rv,R3z, RS, RSm, RSk, RmrAssessed profilesRoughness profile (R) Primary profile (P)UnitsMetric, ImperialDisplay resolution0.001 μmData outputRS232Pickup measuring range±20μm, ±40μm, ±80μmCutoff length (L)0.25mm / 0.8mm / 2.5mm/AutoEvaluation length1~5L (selectable)Tracing length3-7L(selectable)Digital filterRC, PC-RC, Gauss, D-PMax. tracing length17.5mm/0.71inchMin. tracing length1.3mm/0.052inchPick-upStandard pickup TS100, inductive, diamond stylus radius 5μm, angle of stylus 90°Accuracy≤±10%Repeatability≤6%PowerLi-ion battery rechargeableDimensions (mm)140×52×48Weight (g)440 Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/time3200-surface-roughness-tester-tr200-p-1931.html Thu, 20 Jul 2023 04:45:08 +0000 USD 1931 Time 999 TIME3200 https://www.abqindustrial.net/store/images/time3200-surface-roughness-tester.jpg https://www.abqindustrial.net/store/images/additional/time3200-surface-roughness-tester-tr200-5581.jpg https://www.abqindustrial.net/store/images/additional/time3200-surface-roughness-tester-tr200-5582.jpg https://www.abqindustrial.net/store/images/additional/time3200-surface-roughness-tester-tr200-5584.jpg https://www.abqindustrial.net/store/images/additional/time3200-surface-roughness-tester-tr200-5583.jpg https://www.abqindustrial.net/store/images/additional/time3200-surface-roughness-tester-tr200-5585.jpg 1931 0 /store/images/warranty-1-year-new.png DeFelsko SSPC VIS Standards https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-sspc-vis-standards-p-2174.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2174 For Evaluation of the Degree of Rusting on Painted Steel SurfacesThe DeFelsko VIS5 SSPC VIS 5 / NACE VIS 9 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning The DeFelsko VIS5 SSPC VIS 5 / NACE VIS 9 Standards is Ideal for Evaluation of the Degree of Rusting on Painted Steel Surfaces This guide describes the use of reference photographs depicting the appearance of unpainted, rusted carbon steel prior to and after cleaning by wet abrasive blast cleaning (WAB or Slurry blasting). The wet abrasive blast cleaning techniques and equipment are described in SSPC-TR 2/NACE 6G198.The reference photographs are intended to supplement the written standards SSPC-SP10/NACE No. 2, SSPC-SP-6/NACE No. 3, and ISO 8501-1 (E). This guide can be used to clarify the acceptable level of flash rusting allowed prior to the application of protective coatings. Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-sspc-vis-standards-p-2174.html Sat, 17 Jan 2026 12:19:23 +0000 USD 2174 DeFelsko 913 VIS https://www.abqindustrial.net/store/images/defelsko-sspc-vis-standards-prod.jpg 2174 87 images/manufacturers_warranty/2/warranty-2-new.png DeFelsko ICRI Concrete Surface Profile Chips https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-icri-concrete-surface-profile-chips-p-2180.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2180 DeFelsko CSPTG Concrete Surface Profile Chips with Technical Guideline (set of 10)DeFelsko CSP Concrete Surface Profile Chips (set of 10)Technical Guideline (no. 310.2R-2013)The DeFelsko ICRI Concrete Surface Profile Chips - International Concrete Repair Institute (ICRI) produces 10 distinct concrete profiles formed by various surface preparation methods. Each profile carries a CSP number ranging from CSP 1 (nearly flat) to CSP 10 (very rough; amplitude greater than ¼" [6 mm]).These chips are designed as a visual and tactile comparator for identifying the degree of surface roughness. The user compares prepared concrete to the CSP chips and reports the chip number that most closely resembles the surface. Many jobs will specify the type of surface preparation required.The ICRI CSP Chips are approximately 16 square inches (3.5" x 4.5") and are designed to replicate 10 surface profiles shown below.Available with or without Technical Guideline (no. 310.2R-2013) Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repairs prepared by ICRI Kit Contents DeFelsko CSPTG Concrete Surface Profile Chips With Technical GuidelineSet of 10 Concrete Surface Profile Chips (CSP 1 - 10)Technical Guideline (no. 310.2R-2013)The guide provides owners, specifiers, contractors, and manufacturers with the information required to select and specify the methods for preparing concrete surfaces prior to the application of a protective system or repair material. Click image to enlarge DeFelsko CSP Concrete Surface Profile ChipsSet of 10 Concrete Surface Profile Chips (CSP 1 - 10) Click image to enlarge Specifications Look-up Table (Conversion of ICRI Panels to mils)DescriptionICRI CSP No.Digital Depth Micrometer / ASTM D8271 (mils)*Acid-etched16 ± 2Grinding26 ± 2Light Shotblast311 ± 2Light Scarification415 ± 2Medium Shotblast516 ± 2Medium Scarification637 ± 4Heavy Abrasive Blast748 ± 4Scabbled/Surface Retarder8Not measuredHeavy Scarification9Not measuredHandheld Concrete Breaker/Abrasive Blast Cleaned; or High-Pressure Water Jetting10Not measured*Average of 15 readings, based on the data generated in this study The Digital Method for Measuring Concrete Surface Profile ASTM D8271 documents an alternative to the traditional qualitative method using CSP Chips- digital depth micrometers such as the PosiTector SPG TS. This fully digital method nearly eliminates operator influence on the test, and provides quantitative results that can be downloaded to a PC for reporting. Learn more about the digital method, and how measurements compare with the CSP chips, in this article.‍PosiTector SPG TS— A quantitative alternative for measuring surface profile. Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-icri-concrete-surface-profile-chips-p-2180.html Sun, 18 Jan 2026 21:04:10 +0000 USD 2180 DeFelsko 854 ICRI https://www.abqindustrial.net/store/images/defelsko-icri-concrete-surface-profile-chips.jpg https://www.abqindustrial.net/store/images/additional/defelsko-icri-concrete-surface-profile-chips-6655.jpg https://www.abqindustrial.net/store/images/additional/defelsko-icri-concrete-surface-profile-chips-6656.jpg https://www.abqindustrial.net/store/images/additional/defelsko-icri-concrete-surface-profile-chips-6657.jpg 2180 146 images/manufacturers_warranty/2/warranty-2-new.png Testex RTM Digital Micrometer Thickness Gage https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/testex-rtm-digital-micrometer-thickness-gage-p-2181.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2181 Custom-designed to be the optimal tool for measuring replica tapeMakes taking measurements and creating reports easier than everThe Testex RTM Digital Micrometer Thickness Gage makes using Testex Replica Tape even easier. It is custom-designed to be the optimal tool for measuring replica tape, and makes taking measurements and creating reports easier than ever.The Testex RTKIT Digital Micrometer Kit Thickness Gage includes everything required to measure the surface profile using replica tape. Kit Contents Testex RTM Digital Micrometer Thickness Gage3 Cartons of Replica Tape – Coarse, X-Coarse, and X-Coarse PlusClassic Burnishing ToolHigh Accuracy Burnishing ToolUSB CableCertificate of Calibration1 AAA batteryCaseInstruction Manual Click image to enlarge Features Easy to UseBright, high-contrast digital color display with large numerals for easy viewing in bright or dark environmentsMeasures in both Microns and MilsBuilt-in memory for up to 250 readings with on-screen statistics. View and download measurements on any computer using the included USB cable. No software required.Durable, all-metal housingPowered by a single AAA battery Click image to enlarge Designed for Replica TapeSimply select the appropriate replica tape grade to automatically apply the appropriate conversion factor and subtract the 50 µm (2 mils) backing thicknessIn 'Average mode', the Micrometer prompts the user and averages two readings, in compliance with international standardsA traceable Certificate of Calibration is included with each digital micrometer Click image to enlarge Download to a PC or MacFully compatible with powerful PosiSoft Software for archiving and reporting measurement dataUSB Drive mode retrieves data in a manner similar to a flash drive in .csv format. No software to install or internet connection required Click image to enlarge Specifications Measuring Range0 - 40 mils0 - 1000 µmAccuracy0 - 10 mils: ±0.2 mils10 - 40 mils: ±(0.2 mils + 1%)0 - 250 µm: ±5 µm250 - 1000 µm: ±(5 µm + 1%)Resolution0.1 mils1 µmClosing Force1.1 NAnvil Diameter0.25"6.35 mmUnitsMicrons/Mils SwitchableCertifiedYesHow It WorksPrepareBurnishMeasureClean the surface with a putty to remove dust and other contaminants.Use cleaning putty to remove dust, debris, or residual blast media from the measurement site by firmly pressing the putty onto the surface to be tested using your fingers and remove.Select the appropriate grade of replica tape, then pull a single piece of tape free of its release paper and apply to blasted surface.Firmly compress replica film using burnishing tool by applying sufficient pressure in a circular and x-y rubbing motion. When complete, remove tape from surface.Insert the compressed replica tape between the micrometer's measurement anvils and take a reading.Ensure the tape is properly positioned so that the burnished region is centered in the anvils with the adhesive side down. Accessories DeFelsko RTBURNISHHA High Accuracy Burnishing ToolBurnishing tool includes a built-in spring mechanism ensuring that consistent force is used, regardless ofhow hard the tool is pressed against the surface Click image to enlarge DeFelsko STDRTSHIMS Precision Shim SetUsed to verify the accuracy and operation of Testex and other spring micrometer replica tape readers Click image to enlarge DeFelsko RTRPUTTY Surface Cleaning PuttyTo clean the surface of debris prior to burnishing Click image to enlarge DeFelsko STDRTCSS Certified Shim SetUsed to verify the accuracy and operation of all Testex micrometers. Ideal for fulfilling both ISO and in-house quality control requirements. Includes Certificate of Calibration traceable to PTB Click image to enlarge DeFelsko RTBURNISHPL Legacy Burnishing ToolRound-end plastic rubbing tool to compress replica film on the blasted surface Click image to enlarge Related Products Testex Press-O-Film Replica TapeMeasures surface profile by creating a replica of the surface, which can be measured using a micrometer Click image for more info Downloads Testex Digital Micrometer Thickness Gage - Quick GuideTestex Digital Micrometer Thickness Gage - Instruction ManualTestex Digital Micrometer Thickness Gage - Instruction Manual EuporeTestex Digital Micrometer Thickness Gage - Instruction Manual Asia Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/testex-rtm-digital-micrometer-thickness-gage-p-2181.html Wed, 25 Mar 2026 15:53:17 +0000 USD 2181 Testex 918 RTM https://www.abqindustrial.net/store/images/testex-rtm-digital-micrometer-thickness-gage.jpg https://www.abqindustrial.net/store/images/additional/testex-rtm-digital-micrometer-thickness-gage-6658.jpg https://www.abqindustrial.net/store/images/additional/testex-rtm-digital-micrometer-thickness-gage-6659.jpg https://www.abqindustrial.net/store/images/additional/testex-rtm-digital-micrometer-thickness-gage-6660.jpg 2181 82 /store/images/warranty-1-year-new.png DeFelsko ISO Surface Roughness Comparators https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-iso-surface-roughness-comparators-p-2186.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2186 Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces4 reference profile grades per comparatorSelect from Grit Blast and Shot BlastSurface Profile Comparators provide a quick means for visually and tactilely assessing surface profile depth generated by abrasive blast cleaning with or without an illuminated magnifier. Disks include 4 or 5 reference grade profiles, depending on model. Features Durable roughness comparators contain four reference profile grades per disk to assess surface profile depth generated by abrasive blast cleaning by both touch and sight.Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces4 reference profile grades per comparatorSelect from Grit Blast and Shot BlastMetric UnitsConforms to ISO 8503-1 and ISO 8503-2 Specifications Name / DescriptionRangeDeFelsko SRCMICGRIT Grit Blast - ISO Surface Roughness Comparators25, 60, 100, 150 µmDeFelsko SRCMICSHOT Shot Blast - ISO Surface Roughness Comparators25, 40, 70, 100 µm Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/defelsko-iso-surface-roughness-comparators-p-2186.html Sun, 18 Jan 2026 21:04:31 +0000 USD 2186 DeFelsko 995 SRCMIC https://www.abqindustrial.net/store/images/defelsko-iso-surface-roughness-comparators.jpg https://www.abqindustrial.net/store/images/additional/defelsko-iso-surface-roughness-comparators-6683.jpg 2186 5 images/manufacturers_warranty/2/warranty-2-new.png Keane-Tator Surface Roughness Comparators https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/keane-tator-surface-roughness-comparators-p-2187.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2187 Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces5 reference profile grades per comparatorMade of durable high purity nickelSurface Profile Comparators provide a quick means for visually and tactilely assessing surface profile depth generated by abrasive blast cleaning with or without an illuminated magnifier. Disks include 4 or 5 reference grade profiles, depending on model. Features 3" durable reference disks include 5 reference profile grades per comparator to visually compare profile depth generated by abrasive blast cleaning.Compact, portable field instrument—ideal for quick assessment of blast cleaned surfaces5 reference profile grades per comparatorMade of durable high purity nickelSelect from Grit/Slag Blast, Sand Blast, and Shot BlastIlluminated 5x Magnifier for use with comparator disks availableImperial unitsConforms to ASTM D4417-A Specifications Name / DescriptionRangeDeFelsko SRCMILGRIT Grit Blast - Keane-Tator Surface Roughness Comparators1.5, 2, 3, 4.5, 5.5 milsDeFelsko SRCMILSAND Sand Blast - Keane-Tator Surface Roughness Comparators0.5, 1, 2, 3, 4 milsDeFelsko SRCMILSHOT Shot Blast - Keane-Tator Surface Roughness Comparators2, 2.5, 3, 4, 5.5 milsDeFelsko SRCMAG Illuminated Magnifier Keane-Tator Surface Roughness Comparators——— Albuquerque Industrial https://www.abqindustrial.net/store/surface-profile-c-108/surface-profile-gauges-c-108_70/keane-tator-surface-roughness-comparators-p-2187.html Sun, 18 Jan 2026 21:05:07 +0000 USD 2187 DeFelsko 967 Keane-Tator https://www.abqindustrial.net/store/images/keane-tator-surface-roughness-comparators.jpg 2187 33 images/manufacturers_warranty/2/warranty-2-new.png