https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/checkline-pd765-6r3-20-digital-tension-indicator-4-digit-display-p-1163.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1163 Checkline PD765-6R3-20 Digital Tension Indicator 4-Digit DisplayThe Checkline PD765 Digital Indicator is designed to work with Check-Line tension sensors providing a large, bright LED display of real-time tension values. It is easy to set up and permits flush panel mounting in a 1/8  DIN cutout. The PD765-6R3-20 offers 4-20 mA output for external recording and data-logging purposes. Hi/Lo limits and relay contacts can be optionally specified on PD765-6R5-10 supplied instead of the 4-20 mA analog output. The standard model PD765-6R3-20, operates from all worldwide AC-Power (85-265V AC). 0-10V DC output is not available Features Can be scaled to any engineering units desired with user-set decimal point.4-20 mA analog output for recording and control purpose (No analog output provided on PD765-6R5-10)Requires 85-265V AC Power, provides regulated power for the tension sensorHi/Lo Limits and relay contacts provided on PD765-6R5-10 (supplied instead of 4-20ma output)User-set filters can be used to adjust signal sensitivity to reduce fluctuations of tension values Specifications Display Range-1999 to 9999Display4-digit Red LED, 14.2 mm highDisplay IntensityEight user selectable levelsFront PanelNEMA 4X, IP65; panel gasket providedProgramming MethodsFour front panel buttons, cloning with Copy feature, PC with MeterView or LavVIEW software and Modbus registers. Certified LabVIEW driver available.Noise FilterProgrammable 2 to 199 (0 will disable filter)Display Update RateProcess/RTD: 3.7-5/sec; TC: 1.8-2.5/secOverrangeDisplay flashes 9999UnderrangeDisplay flashes -1999RecalibrationAll inputs are calibrated at the factory; recalibration is recommended at least every 12 months.Min/Max DisplayStored until reset by user or meter is turned offPasswordRestricts modification of programmed settingsNon-Volatile MemorySettings stored for a minimum of 10 yearsPower Options85-265 VAC; 12-36 VDCRequired FuseUL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuseNormal Mode Rejection64 dB at 50/60 HzIsolation4 kV input/output-to-power line; 500 V input-to-output or output-to-24 VDC supplies. -6R5 models only: 100 V output-to-24 VDC supplyOperating Temperature0 to 65°CStorage Temperature-40 to 85°CRelative Humidity0 to 90% non-condensingConnectionsPower & Signal: removable screw terminal blocks accept 12 to 22 AWG. Serial: RJ11 header, standard on all metersEnclosure1/8 DIN, high impact plastic, 94 V-0, color: grayWeight9.5 oz (269 g) (including options)Warranty3 yearsAccuracy±0.05% FS ±1 count; square root: ±0.1% FS ±2 countsFunctionLinear or square rootLow-Flow Cutoff0 to 9999 (0 disables cutoff function)Decimal PointUp to 3 decimalsCalibrationScale without signal or calibrate with signal sourceCalibration RangeUser programmable over entire range of meterInput InpedanceVoltage range: greate than 1MΩ, Current range: 50-100 Ω, varies with resettable fuse impedanceInput OverloadProtected by automatically resettable fuseTemperate Drift±50 PPM/°CTransmitter SupplyIsolated, one or two transmitter supplies:P1: 24 VDC ±10% @ 200 mA max (-10 option)P1 & P2: 24 VDC ±10% @ 200 mA & 40 mA max (-20 option)Realays (Model PD765-6R5-10 ONLY)RatingForm C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP (≈50 watts) @ 125/250 VAC for inductive loads such as contactors, solenoids, etc.Deadband0 - 100% FS, user selectableHigh or Low AlarmUser may program any alarm for high or lowRelay Operation1. Automatic (non-latching)2. Latching3. Pump alternation controlRelay ResetUser selectable via front panel buttons or PC1, Automatic reset only (non-latching)2. Automatic plus manual reset at any time (non-latching)3. Manual reset only, at any time (latching)4. Manual reset only after alarm condition has cleared (latching)Automatic ResetRelays reset when input passes the reset pointManual ResetFront panel button, MeterView, Modbus registersTime Delay0 to 199 seconds, on and off delays; programmableFail-Safe OperationProgrammable, independent for each relay. Relay coils are energized in non-alarm condition. In case of power failure, relays will go to alarm state.Auto InitializationWhen power is applied to the meter, relays will reflect the state of the input to the meterIsolated 4-20 MA Transmiter OutputScaling Range1.00 to 23.00 mA; reverse scaling allowedCalibrationFactory calibrated 4.00 to 20.00 mAAccuracy±0.1% FS ±0.004 mATemperature Drift50 PPM/°C Note: Analog output drift is separate from input driftIsolation500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power lineOutput Loop Resistance24 VDC: Minimum - 10Ω Maximum - 700Ω35 VDC (external): Minimum - 100Ω Maximum - 1200Ω Ordering Guide PD765-6R3-20 - Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 4-20mA Analog output. Requires 85-265V AC-PowerPD765-6R5-10 - Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 2 Alarm Limits & Relays. No analog output provided. Requires 85-265V AC-PowerPD6000-6R3 Digital Tension Indicator 4-Digit Display for connection to tension Sensors. Provides regulated power for the sensor, includes 4-20mA Analog output. Requires 85-265V AC-Power Downloads PD765 Digital Tension Indicator - Data SheetPD765 Digital Tension Indicator - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-indicators-amplifiers-c-98_45/checkline-pd765-6r3-20-digital-tension-indicator-4-digit-display-p-1163.html Tue, 17 Feb 2026 19:01:16 +0000 USD 1163 Checkline 998 PD765 https://www.abqindustrial.net/store/images/PD765%20Digital%20Tension%20Indicator.jpg https://www.abqindustrial.net/store/images/additional/pd765-digital-tension-indicator-3620.jpg https://www.abqindustrial.net/store/images/additional/pd765-digital-tension-indicator-3621.jpg https://www.abqindustrial.net/store/images/additional/pd765-digital-tension-indicator-3622.jpg https://www.abqindustrial.net/store/images/additional/pd765-digital-tension-indicator-3623.jpg https://www.abqindustrial.net/store/images/additional/pd765-digital-tension-indicator-3624.jpg 1163 DIN cutout. The PD765-6R3-20 offers 4-20 mA output for external recording and data-logging purposes. Hi/Lo limits and relay contacts can be optionally specified on PD765-6R5-10 supplied instead of the 4-20 mA analog output. The standard model PD765-6R3-20, operates from all worldwide AC-Power (85-265V AC). 0-10V DC output is not available. ]]> 2 /store/images/warranty-1-year-new.png