Albuquerque Industrial : RSS Products Feed

Albuquerque Industrial : RSS Products Feed :: Tension Sensors, Online https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2024 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Sun, 07 Jul 2024 15:22:59 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 TELC System https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/telc-system-p-437.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=437 ]]>Low Cost Tension Monitoring System 7 Ranges up to 10 Kg RS232 Serial output (optional) allows you to connect to a PC for datalogging TELC Sensor plus TD-1-TE Indicator Accurately measures the running line tensions of yarns, fibers, wires, cables, films & similar process materials - continuously! The TELC System detects "out of tolerance" conditions and immediately alerts operating personnel. This enables them to take the appropriate corrective action to maintain the highest product quality. Additionally, the TELC Tension Sensor can be installed separately, as part of a user-supplied control-loop system. RS232 Serial Output (optional) Features Precision strain gauge accuracy of ± 1.5% or better User-set high & low alarm limits with relays for alerting operating personnel of "out of tolerance" conditions V-grooved rollers rated for speeds up to 2000 m/min are standard or, optionally, 3500 m/min (option K) or 5000 m/min (option HS) Analog output for recording and control purposes Built-in electronic damping to filter out fluctuating tension readings RS232 Serial output (optional) allows you to connect your sensor to our SensorView software Specifications Accuracy ±1.5% or better Power Required 12 - 24 V DC, regulated (20 mA) Deflection 0.5 mm maximum Output (Standard) 0-1 V DC Output (Optional) 0-10 V DC, 4-20 mA, RS-232 or RS-485 (Addressable) Analog: 0 –2 V AC, linearized, app. 500 Hz Digital: RS 232 (9600,8,N,1) Frequency Response 50 Hz Outer Roller Spacing 40-200 mm, depending upon tension range, process material and application Operating Temperature 40 to 105° F (5-40° C) Ranges Model Range Model Range TELC-100 0-100 g TELC-2K 0-2 Kg TELC-200 0-200 g TELC-5K 0-5 Kg TELC-500 0-500 g TELC-10K 0-10 Kg TELC-1K 0-1 Kg Special Purpose Models Tapes/Films & Tows Type RX Uses 7, 10, 15, 20 or 30 mm wide cylindrical rollers for "strip" materials. Wider materials can be accommodated with other models. Heavy-Duty Model Type 24 Uses 30mm diameter hardened steel rollers for heavy wires, cable tire cord and similar process materials subjected to high impact loads Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads TELC System - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/telc-system-p-437.html Thu, 13 Jan 2022 16:28:29 +0000 USD 437 1000 TELC System https://www.abqindustrial.net/store/images/products/TELC.jpg RFSE On-Line Tension Sensor with Built-In Amplifier https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfse-on-line-tension-sensor-with-built-in-amplifier-p-438.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=438 ]]>On-Line Tension Sensor with Built-In Amplifier 10 Ranges up 500Kg Resolution of 0.1% and better The new CHECK-LINE Model RFSE Tension Sensors measure the running line tensions of yarn, wires, optic fibers, cables, tapes/bands, wraps/webs, foils and similar process materials. Its unique strain-gauge design delivers excellent measurement precision and stability as well as providing maximum overload protection. They are used in a variety of low and high-range applications, such as measuring 1 or 2 grams on fine denier yarns/fibers to applications measuring wire/cable up to 500 Kg. Built-in amplifier provides a 0-10 VDC or 4-20 mA output. This sensor requires an unregulated 24 VDC power source. Requires a "zero" adjustment only Features Integrated measurement amplifier for compact mounting onto the application Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed Threaded housing with lock-nuts permits easy mounting and simple alignment Overload protection up to 800% Wide variety of precision, ball-bearing mounted guide rollers are available Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available Custom sensor designs can be developed to meet specific applications requirements. Inquire Specifications Measuring Principle Strain Gauge Accuracy ±0.5% Full Scale or better Sensor Excitation 10 VDC (12 VDC, max.) Sensor Output 1.5 mV/V Input Resistance 350 Ohms Output Resistance 350 Ohms Overload Protection 400 - 800% Deflection 0.07mm (max.) Housing Material Stainless Steel Environmental Protection IP50 (Splash-Proof) Cable Type 4.5 mm diameter shielded cable with bare leads Cable Length 10 ft. (3 meter), longer lengths available. Inquire Operating Temperature 15 to 155° F (-10 to 70° C) Sensor Excitation 19 - 28 VDC (24 VDC recommended @ 36 mA) Sensor Output 0 - 10 VDC (standard) 4 - 20 mA (optional) Fequency Responce 5 msec (200 Hz) Zero Adjustment ±45% Weight 500g Ranges RFS-100 0-100 g (0.00-0.22 lbs) RFS-5K 0-5 Kg (0.00-11.0 lbs) RFS-200 0-200 g (0.00-0.44 lbs) RFS-10K 0-10 Kg (0.00-22.0 lbs) RFS-500 0-500 g (0.00-1.10 lbs) RFS-20K 0-20 Kg (0.00-44.0lbs) RFS-1K 0-1 Kg (0.00-2.20 lbs) RFS-50K 0-50 Kg (0.00-110 lbs) RFS-2K 0-2 Kg (0.00-4.40 lbs) RFS-100K 0-100 Kg (0.00-220.0 lbs) Downloads RFSE On-Line Tension Sensor with Built-In Amplifier - Product Line RFSE On-Line Tension Sensor with Built-In Amplifier - Calculating Resultant Force RFSE On-Line Tension Sensor with Built-In Amplifier - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfse-on-line-tension-sensor-with-built-in-amplifier-p-438.html Thu, 13 Jan 2022 16:26:23 +0000 USD 438 1000 RFSE https://www.abqindustrial.net/store/images/products/RFSE.jpg RFS On-Line Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs-on-line-tension-sensor-p-439.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=439 ]]>RFS On-Line Tension Sensor 10 Ranges up 500Kg Resolution of 0.1% and better TheModel RFS Tension Sensors measure the running line tensions of yarn, wires, optic fibers, cables, tapes/bands, wraps/webs, foils and similar process materials. RFS stands for enduring online precision. The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of the force introduction point, i.e. the sensor is not affected by lever arm action any axial tilt torques which might appear direct axial forces The functional principle makes for superb sensitivity while at the same time offering enormous performance capabilities. The force acting radially at the bearing journal, along the measurement vector, causes a microscopically small, elastic deformation of the complex load cell. The deformation is registered at an exactly pre-determined position by way of strain gauges and is then evaluated precise electronically. The high mechanical stiffness of the load cell enables measurement with virtually no excursion. This tension measurement principle is based on the evaluation of the force applied radially and transferred to the sensor by way of the bearing journal. This force is determined by the reversing geometry and the line tension. Features Extremely robust by overload protection up to 800% Existing reversing points can be adapted as measurement points Independent of the force introduction point, i.e. the sensor is not affected by lever arm action No influence of any axial tilt torques or direct axial forces which might appear Centrifugal force will take no affect with optimal alignment in rotating purposes Stainless steel housing Thought-through concept of housing for simple mounting Also suitable to design measuring rollers for acquisition of very low web tensions Specifications Accuracy ±1 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Temperature drift Less than ±0.05 % full scale/°C Output Signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 1500 g (approx. 1800 g) Downloads RFS On-Line Tension Sensor - Calculating Resultant Force RFS On-Line Tension Sensor - Instruction Manual RFS On-Line Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs-on-line-tension-sensor-p-439.html Thu, 13 Jan 2022 16:23:53 +0000 USD 439 1000 RFS https://www.abqindustrial.net/store/images/products/RFS.jpg TE General Purpose Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-general-purpose-tension-sensor-p-441.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=441 ]]>Call for Price General Purpose Tension Sensor 10 Tension Ranges from 0-50 g up to 0-50.0 Kg RS232 Serial Output (optional) allows you to connect to a PC for datalogging 10 Tension Ranges 0-50 g up to 0-50.0 Kg Accurately measure the running line tensions of yarns, fibers, wires, and similar filaments. Compact size for easy installation. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference. NEW RS232 Serial Output (optional). Features Precision strain gauge sensing for highest accuracy and repeatability. 0-1 V DC output, proportional to tension (0-10 V DC optional) . Roller shells are available in chrome-plated steel, hard-coated aluminum, plastic and ceramic. Frequency response of 100 Hz Optional 10ft. connecting cable, TE-CABLE-CN is recommended. Longer lengths are available. RS232 Serial output (optional) allows you to connect your sensor to our SensorView software. Tension Ranges Model Range Model Range TE-50 0-50.0 g TE-2K 0-2000 g TE-100 0-100.0 g TE-5K 0-5.00 Kg TE-200 0-200 g TE-10K 0-10.0 Kg TE-500 0-500 g TE-20K 0-20.0 Kg TE-1K 0-1000 g TE-50K 0-50.0 Kg Images Pinouts Dimensions Specifications Accuracy ± 1.5% FS or better Sensor Excitation 12-18 VDC, 21mA Middle Roller Deflection 0.5mm (maximum) Sensor Output 0-1 V DC (standard) 0-10 V DC (optional) proportional to tension Frequency Response 100 Hz Overload Rating 150% FS Housing Material Aluminum Operating Temp. 40 to 105° F (5-40° C) Spacing of Outer Rollers 40, 100, 150, 200 & 20mm, see dimensions above Roller shell Material Hardened Steel (Standard) Chrome-plated Steel (CH) Hard-coat Aluminum (AL) Plastic (PL) Ceramic (CE) Maximum Linear Speed 1000 m/min (Standard) 3000 m/min (K) 5000 m/min (U) Output (Optional) Analog: 0 –2 V AC, linearized, app. 500 Hz Digital: RS 232 (9600,8,N,1) Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TE General Purpose Tension Sensor - InstructionManual TE General Purpose Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-general-purpose-tension-sensor-p-441.html Thu, 13 Jan 2022 16:26:28 +0000 USD 441 1000 TE https://www.abqindustrial.net/store/images/products/TE.jpg TF Optic Fiber Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tf-optic-fiber-tension-sensor-p-442.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=442 ]]>Optic Fiber Tension Sensor 6 Tension Ranges from 0–100 g up to 0–5.00 Kg Large 70 mm aluminum rollers minimize bending of material which might damage or brake the fragile filament 6 Tension Ranges: 0–100 g up to 0–5.00 Kg Large 70 mm aluminum rollers minimize bending of material which might damage or break the fragile filament. The outer rollers are mounted on a movable plate to minimize contact when measurements are not being made. Tension ranges of 10Kg and higher are available without moveable outer rollers. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference Features 70mm V-grooved rollers are rated for speeds up to 5000 m/min. Specify TE-CABLE-CC 5 ft. connecting cable (optional, longer lengths are available upon request). Frequency response of 100 Hz. 0-1 V DC output, proportional to tension (0-10 V DC optional). Precision strain gauge sensing insures highest accuracy. Optional rollers are available for a wide variety of material profiles. Surface mount electronics provide long-term reliability Specifications Accuracy ± 1.5% FS or better Sensor Excitation 12-18 VDC, 21mA Middle Roller Deflection 0.5mm (maximum) Sensor Output 0-1 V DC (standard) 0-10 V DC (optional) proportional to tension Frequency Response 100 Hz Overload Rating 150% FS Housing Material Aluminum Operating Temp. 40 to 105° F (5-40° C) Spacing of Outer Rollers 40, 100, 150, 200 & 20mm, see dimensions above Roller shell Material Hardened Steel (Standard) Chrome-plated Steel (CH) Hard-coat Aluminum (AL) Plastic (PL) Ceramic (CE) Maximum Linear Speed 1000 m/min (Standard) 3000 m/min (K) 5000 m/min (U) Output (Optional) Analog: 0 –2 V AC, linearized, app. 500 Hz Digital: RS 232 (9600,8,N,1) Ranges Model Range Model Range TF-100 0-100 g TF-1K 0-1000 g TF-200 0-200 g TF-2K 0-2000 g TF-500 0-500 g TF-5K 0-5.00 Kg Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TF Optic Fiber Tension Sensor - Instruction Manual TF Optic Fiber Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tf-optic-fiber-tension-sensor-p-442.html Thu, 13 Jan 2022 16:28:31 +0000 USD 442 1000 TF https://www.abqindustrial.net/store/images/products/TF.jpg TE-22 Low Inertia Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-22-low-inertia-tension-sensor-p-443.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=443 ]]>Low Inertia Tension Sensor For Fragile Filaments 5 Tension Ranges from 0-50 g up to 0-1000 g Lightweight 32mm diameter rollers minimize the deflection of the material path for fragile filaments or very low tension applications. 5 Tension Ranges 0-50 g up to 0-1000 g TE-xx-22-PL (with Delrin Plastic Rollers) TE-xx-22-AL (with Hardcoated Aluminum Rollers) Lightweight 32mm diameter rollers minimize the deflection of the material path for fragile filaments or very low tension applications. A built-in amplifier conditions the strain gauge signal, providing a 0–1 VDC output, minimizing the chance for signal interference. Other important features include user-accessible calibration adjustment pots and gold-plated contacts on the connector. Features Lightweight 32mm diameter rollers are offered in Delrin Plastic (specify TE-xx-22-PL) or Harcoated Aluminum (specify TE-xx-22-AL). Precision strain gauge sensing for highest accuracy and repeatability. Frequency response of 100 Hz. 0-1 V DC output, proportional to tension (0-10 V DC optional). Surface mount electronics provide long-term reliability. Optional 10ft. connecting cable, TE-CABLE-CN is recommended. Specifications Accuracy ± 1.5% FS or better Sensor Excitation 12 - 18 VDC, 21mA Middle Roller Deflection 0.5 mm (maximum) Sensor Output 0-1 V DC (standard) 0-10 V DC (optional) proportional to tension Overload Protection 150% FS Housing Material Aluminum Spacing of Outer Rollers See Dimensional Drawing Roller Diameter (Root) 32 mm Roller Material Plastic (standard) Aluminum (optional) Maximum Linear Speed 4000 m/min 5000 m/min 40 to 105° F (5-40° C) Frequency Response 100 Hz Tension Ranges Model Range Model Range TE-50-22 0-50 g TE-500-22 0-500 g TE-100-22 0-100 g TE-1K-22 0-1000 g TE-200-22 0-200 g Note: Please specify Hardcoated Aluminum (AL) or Delrin Plastic (PL) Rollers. Dimensions Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TE-22 Low Inertia Tension Sensor -Instruction Manual TE-22 Low Inertia Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-22-low-inertia-tension-sensor-p-443.html Thu, 13 Jan 2022 16:26:28 +0000 USD 443 1000 TE-22 https://www.abqindustrial.net/store/images/products/TE-22.jpg TE-24 Heavy-Duty Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-24-heavy-duty-tension-sensor-p-444.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=444 ]]>Heavy Duty Tension Sensor 6 Tension Ranges 0-1000 g up to 0-20.0 Kg Heavy-duty, hardened steel rollers makes this model especially suitable for tire cord, wires and similar filaments to high-impact loading 6 Tension Ranges 0-1000 g up to 0-50.0 Kg Heavy-duty, hardened steel rollers makes this model especially suitable for tire cord, wires and similar filaments to high-impact loading. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference. Features Designed as a single-roller system -uses an existing reversing point for tension measurement. Rugged stainless steel housing is environmentally sealed. Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available. System of protection IP67 - waterproof. Overload protection up to 800%. Resolution of 0.1% and better Specifications Accuracy ± 1.5% FS or better Sensor Excitation 12 - 18 VDC, 21mA Middle Roller Deflection 0.5 mm (maximum) Sensor Output 0-1 V DC (standard) 0-10 V DC (optional) proportional to tension Overload Protection 200% FS Housing Material Aluminum Roller Diameter (Root) 29.5 mm Roller Material Hardened Steel Maximum Linear Speed 2400 m/min 5000 m/min 40 to 105° F (5-40° C) Frequency Response 100 Hz Ranges Model Range TE-1K-24A 0–1000 g TE-2K-24A* 0–2000 g TE-5K-24C 0–5.00 Kg TE-10K-24C 0–10.00 Kg TE-20K-24D 0–20.00 Kg TE-50K-24E 0–50.0 Kg *Can be supplied with a “B” configuration with low material deflection for wire applications. Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads TE-24 Heavy-Duty Tension Sensor - Data Sheet TE-24 Heavy-Duty Tension Sensor Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-24-heavy-duty-tension-sensor-p-444.html Thu, 13 Jan 2022 16:26:29 +0000 USD 444 1000 TE-24 https://www.abqindustrial.net/store/images/products/TE-24.jpg TERX Tape & Band Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/terx-tape-band-tension-sensor-p-445.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=445 ]]>Tape & Band Tension Sensor 5 Tension Ranges 0-100 g up to 0-2000 g Dual-flanged, cylindrical rollers are ball bearing mounted to provide a friction-free path for tapes, bands and narrow webs/warps up to 30mm wide 5 Tension Ranges: 0-100 g up to 0-2000 g Dual-flanged, cylindrical rollers are ball bearing mounted to provide a friction-free path for tapes, bands and narrow webs/warps up to 30mm wide. TERX Tension Sensors are offered with roller width of 7, 10, 15, 20 and 30mm. Features Roller shells are available in aluminum, chrome-plated and plastic Frequency response of 100 Hz Precision strain gauge sensing for highest accuracy and repeatability Optional 5ft. connecting cable 0-1 V DC output, proportional to tension (0-10 V DC optional) Surface mount electronics provide long-term reliability Specifications Accuracy ± 1.5% FS or better Sensor Excitation 12 - 18 VDC, 21mA Middle Roller Deflection 0.5 mm (maximum) Sensor Output 0-1 V DC (standard) 0-10 V DC (optional proportional to tension Overload Rating 150% FS Housing Material Aluminum Maximum Linear Speed 1000 m/min (standard) 3000 m/min (k) (optional) Roller Diameter (Root) 13 mm Roller Material Al (standard) Chromed-Plated Steel (ST) (optional) Plastic (PL) (optional) Frequency Response 100 Hz Operating Temperature 40 to 105° F (5-40° C) Ranges Model Range Outer Roller Spacing c:c TERX-100-YY 0-100 g 40 mm TERX-200-YY 0-200 g 40 mm TERX-500-YY 0-500 g 40 mm TERX-1K-YY 0-1000 g 40 mm TERX-2K-YY 0-2000 g 100 mm Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TERX Tape & Band Tension Sensor - Instruction Manual TERX Tape & Band Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/terx-tape-band-tension-sensor-p-445.html Thu, 13 Jan 2022 16:28:30 +0000 USD 445 1000 TERX https://www.abqindustrial.net/store/images/products/TERX.jpg TP Yarn & Fiber Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tp-yarn-fiber-tension-sensor-p-446.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=446 ]]>Yarn & Fiber Tension Sensor 4 Ranges from 0-50 g to 0-500 g Non-rotation cermaic pins make this model especially suitable for yarns and fibers 4 Tension Ranges: 0-50 g up to 0-500 g Non-rotation cermaic pins make the Model TP Tension Sensor ideal for yarns and fibers running at speeds up to 6,000 m/min Features Precision strain gauge sensing for highest accuracy and repeatability. Frenquency response of 100 Hz. 0-1 V DC output, proportional to tension (0-10 V DC optional). Surface mount electronics provide long-term reliability. 4mm diameter ocide ceramic pins are rated for filament speeds up to 6,000 m/min Specifications Accuracy ±1% FS (10-90% of range) ±3% FS (balance of range) Regulated Sensor Excitation 12-15 V DC (-) @ 10 mA 12-15 V DC (+) @ 20 mA Sensor Output 0-1 V DC (standard) 0-10 V DC (optional) proportional to tension Middle Roller Deflection 0.5 mm (maximum) Overload Ration 150% FS Housing Material Aluminum Operating Temp. 40 to 105 ºF (5-40 ºC) Spacing of Outer Pins 40 mm (c:c) Maximum Linear Speed 6,000 m/min Ranges Model Range TP-50 0-50 g TP-100 0-100 g TP-200 0-200 g TP-500 0-500 g Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TP Yarn & Fiber Tension Sensor - Data Sheet TP Yarn & Fiber Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tp-yarn-fiber-tension-sensor-p-446.html Thu, 13 Jan 2022 16:28:31 +0000 USD 446 1000 TP https://www.abqindustrial.net/store/images/products/TP-Yarn.jpg CSW Narrow Web Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/csw-narrow-web-tension-sensor-p-447.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=447 ]]>Narrow Web Tension Sensor Ranges from 0 - 5 N to 0 - 5000 N Single-side flange mounting The Cantilever sensor roll with integrated force measurement can be installed just like an unilateral installed standard web guide roll without major mechanical modifications. The Cantilever sensor roll provides two functions at once: Measurement of tension in the web Guiding and reversing the product web The Cantilever sensor roll is checked and assembled ready for installation. For the customer the complicated installation of electromechanical and mechanical components is reduced to a minimum Features easy and one-sided mounting with tapped hole integrated Direction Adjuster offers the possibility for precise and stepless direction adjustment of measurement axis, while the sensor roll is completely installed in the machine precise, the measuring accuracy is independent of the force introduction point, i.e. the sensor is not affected by lever arm action easy-turning roller bearings with lifetime lubrication floating and fixed bearing construction with contactless labyrinth seal precision dynamic balancing as per VDI 2060 robust, efficient overload protection by mechanical fixed stop customer-specified dimensions and rated measuring ranges available every coating and geometric structure of the roll surface available - just like for standard web guide rolls Specifications Measurings Ranges 0-5 N to 0-5000 N Resolution 0.1% Excitation 12V Overload Protection 300 - 500% IP Rating IP 50 Downloads CSW Narrow Web Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/csw-narrow-web-tension-sensor-p-447.html Thu, 13 Jan 2022 16:23:48 +0000 USD 447 1000 CSW https://www.abqindustrial.net/store/images/products/CSW.jpg SK 122 FM High Capacity Water Proof Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/sk-122-fm-high-capacity-water-proof-online-tension-sensor-p-448.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=448 ]]>Heavy-Duty, Water-Proof Tension Sensor 3 Ranges up to 5 kN 3 Ranges: 200 KG (440 LBS/2000N) 300 KG (660 LBS/3000N) 500 KG (1100 LBS/5000N) TheModel SK 122 FM Tension Sensor measures the running line tensions of wires, cables and similar process materials. Its unique strain-gauge design delivers excellent measurement precision and stability as well as providing maximum overload protection Features 17mm non-rotating bearing journal Designed as a single-roller system -uses an existing reversing point for tension measurement. System of protection IP67 - waterproof. Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed . Threaded housing with lock-nuts permits easy mounting and simple alignment. Overload protection up to 800% Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available. Custom sensor designs can be developed to meet specific applications requirements. Inquire Specifications Measuring Ranges 200 KG (440 LBS/2000N) 300 KG (660 LBS/3000N) 500 KG (1100 LBS/5000N) Measuring Principle Strain Gauge Accuracy ±0.5% Full Scale or better Sensor Excitation 10 VDC (12 VDC, max.) Sensor Output 1.5 mV/V Input Resistance 350 Ohms Output Resistance 350 Ohms Overload Protection 400 - 800% Deflection 0.07mm (max.) Housing Material Stainless Steel Environmental Protection IP67 (Water-Proof) Cable Type 4.5 mm diameter shielded cable with bare leads Cable Length 10 ft. (3 meter), longer lengths available. Inquire Operating Temperature 15 to 122° F (-10 to 50° C) Sensor Excitation 19 - 28 VDC (24 VDC recommended @ 36 mA) Sensor Output 0 - 10 VDC (standard) 4 - 20 mA (optional) Fequency Responce 5 msec (200 Hz) Zero Adjustment ±45% Weight 450g Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads SK 122 FM High Capacity Water Proof Online Tension Sensor - Specifications Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/sk-122-fm-high-capacity-water-proof-online-tension-sensor-p-448.html Thu, 13 Jan 2022 16:26:26 +0000 USD 448 1000 SK 122 FM https://www.abqindustrial.net/store/images/products/SK.jpg TE-RFS Multi-Configuration Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-rfs-multi-configuration-tension-sensor-p-449.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=449 ]]>Multi-Configuration Tension Sensor Several Ranges up 500 Kg (5000 N / 1100 lbs) Several Ranges up 500 Kg (5000 N / 1100 lbs) The new CHECK-LINE Model TE-RFS Tension Sensor measures the running line tensions of wires, optic fibers and cables. It is designed to minimize the effects of different material rigidities when measuring on a variety of material sizes and also features a unique "tri-tens" system where the material can be threaded through the 3 rollers in 3 distinct paterns. Its unique strain-gauge design delivers excellent measurement precision and stability as well as providing maximum overload protection. 5-Roller version is offered to minimize tension fluctuations in applications where the process material vibrates, oscillates or is unsteady. The 2 additional rollers mounted on top of the process material are mounted on adjustable brackets allowing them to be positioned so that they slightly contact the material They provide additional control to insure that the process material travels over the three primary rollers (located under the material) in a smooth and even fashion Features Based on the precision tension sensor RFS 150. Measure a wide range of materials without need to adjust calibration, when using threading pattern "D". Wear-resistant, ball-bearing guide rollers. Minimizes material deflection Specifications Accuracy ± 1.5% Full Scale or better Tension Ranges (Kg) Several Ranges up 500 Kg (5000 N / 1100 lbs) Outer Roller Spacing (c:c) 300 - 600 mm (depending upon material rigidity) Guide Rollers V Grooved, U Grooved or Flat Cylindrical (with or without flanges) Roller Material Natural Aluminum, Hard Coat Aluminum, Ceramic Plasma-Coated Aluminum & Hardened Steel Overload Protection 200% + Calibration Certificate Optional Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads TE-RFS Multi-Configuration Tension Sensor - Drawing 3 Roller TE-RFS Multi-Configuration Tension Sensor - Drawing 5 Roller Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/te-rfs-multi-configuration-tension-sensor-p-449.html Thu, 13 Jan 2022 16:28:29 +0000 USD 449 1000 TE-RFS https://www.abqindustrial.net/store/images/products/te-rfs.jpg WTM-1R Web Tension Module 1 Roller Design https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wtm-1r-web-tension-module-1-roller-design-p-450.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=450 ]]>Web Tension Module 1 Roller Design Several Ranges up to 200 KG (2000 N / 440 lbs) Several Ranges up to 200 KG (2000 N / 440 lbs) Features Based on 2 RFS Tension Sensors. Customer specified roll material. Labyrinth seals / V-sealing rings. Customer specified roll dimensions. Easy-running self-aligning bearings in non-locating and locating bearing position. Pre-assembled, ready to be installed as measuring module Ranges Model Range Range g/Kg (lbs) WTM-1R-200 0-2 N 0-200 g (0.00-0.44 lbs) WTM-1R-400 0-4 N 0-400 g (0.00-0.88 lbs) WTM-1R-1K 0-10 N 0-1 Kg (0.00-2.20 lbs) WTM-1R-2K 0-20 N 0-2 Kg (0.00-4.40 lbs) WTM-1R-4K 0-40 N 0-4 Kg (0.00-8.80lbs) WTM-1R-10K 0-100 N 0-10 Kg (0.00-22.0 lbs) WTM-1R-20K 0-200 N 0-20 Kg (0.00-44.0 lbs) WTM-1R-40K 0-400 N 0-40 Kg (0.00-88.0 lbs) WTM-1R-100K 0-1000 N 0-100 Kg (0.00-220.0 lbs) WTM-1R-200K 0-2000 N 0-200 Kg (0.00-440.0 lbs) Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads WTM-1R Web Tension Module 1 Roller Design - Calculating Force WTM-1R Web Tension Module 1 Roller Design - Data Sheet WTM-1R Web Tension Module 1 Roller Design - Product Line WTM-1R Web Tension Module 1 Roller Design - Dimension Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wtm-1r-web-tension-module-1-roller-design-p-450.html Thu, 13 Jan 2022 16:29:42 +0000 USD 450 1000 WTM-1R https://www.abqindustrial.net/store/images/WTM-1R.jpg TSB2 Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsb2-tension-sensor-p-451.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=451 ]]>Call for Price Tension Sensor Tension meter for continuous measuring low and high tensions of textile ribbons, films, foils, fibre bunches etc. Tape rollers mounted on both sides, max. width 100 mm Kit Options If sensor is ordered only: 1 diode male plug without connecting cable If sensor and display unit is ordered: 1 connecting cable tension sensor with packaging operating instructions Certificate of Compliance with the order 2.1 according EN 10204 free of charge Features Dual-flanged outer guide rollers with various widths from 10 mm up to 100 mm. Various output signals: Analog (0-1V DC). RS232 (optional). 0-10V DC (optional). Cylindrical tape roller, ball-bearing mounted. Integrated measuring amplifier. Easy calibration to customized material by operator. Rugged aluminum housing. Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report. Specifications Accuracy ±1 % full scale ±1 digit other calibration material: ±3 % full scale or better Overload protection 100% of tension range Measuring principle Strain guage bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Temperature drift less than ±0.05 % fullscale/ºC Output signal 0 - 1 V DC (analog) Damping 30 Hz Temperature range 10 - 45 ºC Air humidity 85 % RH, max. Power supply +12 - 24 V DC, max. 50 mA regulated Tension Ranges Model Range Roller Width (mm) TSB2-1000 0 - 1000 g 30, 36, 41, 50, 100 TSB2-2000 0-2000 g 30, 36, 41, 50, 100 TSB2-5000 0-5000 g 10, 15, 20, 30, 36, 41, 50, 100 TSB2-10K 0-10 Kg 10, 15, 20, 30, 36, 41, 50, 100 TSB2-20K 0-20 Kg 10, 15, 20, 30, 36, 41, 50, 100 TSB2-50K 0-50 Kg 10, 15, 20, 30, 36, 41, 50, 100 Important for your order: Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order. Calibration to customized material: If process material differs significantly from the Electromatic calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied. Dimensions Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TSB2 Tension Sensor - Instruction Manual TSB2 Tension Sensor - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsb2-tension-sensor-p-451.html Thu, 13 Jan 2022 16:28:36 +0000 USD 451 1000 TSB2 https://www.abqindustrial.net/store/images/products/TSB2.jpg WTM-3R Web Tension Module 3 Roller Design https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wtm-3r-web-tension-module-3-roller-design-p-469.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=469 ]]>Web Tension Module 3 Roller Design Several Ranges up to 200 KG (2000 N / 440 lbs) Web Tension Module 3 Roller Design Features Customer specified roll material. Labyrinth seals / V-sealing rings. Customer specified roll dimensions. Easy-running self-aligning bearings in non-locating and locating bearing position. Pre-assembled, ready to be installed as measuring module Ranges Model Range Range g/Kg (lbs) WTM-3R-200 0-2 N 0-200 g (0.00-0.44 lbs) WTM-3R-400 0-4 N 0-400 g (0.00-0.88 lbs) WTM-3R-1K 0-10 N 0-1 Kg (0.00-2.20 lbs) WTM-3R-2K 0-20 N 0-2 Kg (0.00-4.40 lbs) WTM-3R-4K 0-40 N 0-4 Kg (0.00-8.80lbs) WTM-3R-10K 0-100 N 0-10 Kg (0.00-22.0 lbs) WTM-3R-20K 0-200 N 0-20 Kg (0.00-44.0 lbs) WTM-3R-40K 0-400 N 0-40 Kg (0.00-88.0 lbs) WTM-3R-100K 0-1000 N 0-100 Kg (0.00-220.0 lbs) WTM-3R-200K 0-2000 N 0-200 Kg (0.00-440.0 lbs) Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wtm-3r-web-tension-module-3-roller-design-p-469.html Thu, 13 Jan 2022 16:29:47 +0000 USD 469 1000 WTM-3R https://www.abqindustrial.net/store/images/products/WTM-3R.jpg 133-32 Precision Tension Meter https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/133-32-precision-tension-meter-p-728.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=728 ]]>Designed for measuring wires & cables that are fixed at both ends. (closed system) 5 Ranges, up to 1,000lb The angled design utilized in this series gives users a general-purpose sensor with a narrow profile. This makes for convenient measurement operations even where space is restricted - typical when measuring woven tapes and web threads The range of applications for this series of sensors covers extensive areas in research, quality control and production in the wire, cable, film and textile industries and the like Features for measuring monofilament textiles, copper- and steel wires, healds, carbon fibres up to 2,0 mm Ø, as well as tapes, belts, thread groups, films, foils, magnetic tapes, etc. 3 ball-bearing aluminium rollers with V-groove, root Ø 11mm customized guide rollers optional measuring path: 70, 100 or 120mm easy handling even when inserting into running products in cramped quarters excellent long-term stability and high precision for reproducible measuring results effective overload protection for uninterrupted availibility diameter, stiffness, weight and speed of the product being measured have no influence on measuring accuracy smallest possible angle of contact (10°) means minimum impact by: inherent stiffness acceleration torques inertial forces due to deflection available in 6 rated load ranges: 0 to 300cN ... 0 to 4daN Downloads 133-32 Precision Tension Meter - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/133-32-precision-tension-meter-p-728.html Thu, 13 Jan 2022 16:23:46 +0000 USD 728 1000 133-32 https://www.abqindustrial.net/store/images/133-32.jpg ]]> 133-33 Precision Tension Meter https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/133-33-precision-tension-meter-p-729.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=729 ]]>Precision Tension Meter 6 ranges 0 to 5g - 0 to 50 g Available in 6 load ranges 0 - 5 g through 0 - 50 Kg The angled design utilized in this series gives users a general-purpose sensor with a narrow profile. This makes for convenient measurement operations even where space is restricted - typical when measuring woven tapes and web threads. The range of applications for this series of sensors covers extensive areas in research, quality control and production in the wire, cable, film and textile industries and the like Features For measuring monofilament textiles, copper- and steel wires, healds, carbon fibres up to 2.0 mm Ø, as well as tapes, belts, thread groups, films, foils, magnetic tapes, etc. Customized guide rollers optional Easy handling even when inserting into running products in cramped quarters Effective overload protection for uninterrupted availibility Measuring path: 100, 120 or 150mm Smallest possible angle of contact (10°) means minimum impact by: Inherent stiffness Acceleration torques Inertial forces due to deflection 3 ball-bearing aluminium rollers with V-groove, root Ø 16mm Excellent long-term stability and high precision for reproducible measuring results Diameter, stiffness, weight and speed of the product being measured have no influence on measuring accuracy Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes 125-S-HDI Hand-Held Tension Sensor Ideal for high-strength, high denier yarns and fibers running at linear speeds up to 5000 m/min Special plasma-coated steel provides a ceramic-like coating with special "dimpled" surface structure which minimizes surface contact between the running yarn and the Non-rotating guide and sensor pins Downloads 133-33 Precision Tension Meter - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/133-33-precision-tension-meter-p-729.html Thu, 13 Jan 2022 16:23:47 +0000 USD 729 1000 133-33 https://www.abqindustrial.net/store/images/133-33.jpg ]]> CTA Compact Torque Actuator https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-730.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=730 ]]>Compact Torque Actuator Hysteresis brake, electrically adjustable Hysteresis brake, electrically adjustable CTA is an electrically adjustable brake without the need of any external power supply for generating the braking force Features continuous adjustment of the braking force, electromotive adjusted brake torque remains even without external power supply cost-effective actuator for tension control durable, wearless and maintenance-free very smooth running and steady brake moment even at low rotational speeds compact design requires little space torque is independent of rotational speed in a wide range Applications tension controlled unwinding actuating element for tension control simulation of load torques Downloads CTA Compact Torque Actuator - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-730.html Thu, 13 Jan 2022 16:23:50 +0000 USD 730 1000 CTA https://www.abqindustrial.net/store/images/CTA.jpg ]]> OTSE-CF On-line Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/otse-cf-on-line-tension-sensor-p-731.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=731 ]]>On-line Tension Sensor 0 to 40N capacity stackable, easy installation on carrier rail The sensor OTSE-CF is designed especially for tension measurement on fiber ribbons and fiber bundles, e.g. Carbon Fiber (CFK). The compact design and the stackability allow an easy integration into a production line, e.g. behind an unwinding creel. Any grid spacing and grouping is realizable by customizing the carrier rail Features Compact design - only 22 mm wide Measures precisely and long-term stable Very high overload protection Geometry and surface of the sliding sleeve is optimized for carbon fiber bundles Definite product guidance and gentle surface coating Built-in measuring amplifier Exchangeable sliding sleeve Sophisticated system for easy installation on a carrier rail Robust aluminium housing Optional sealing gas connection Specifications Nominal force (FN) N 40 Accuracy class 0,5 max. wrap angle ° 60 Supply voltage range V 20 to 28 Current consumption (without load) mA approx. 36 Output - voltage range V 0 to ±12, RL ≥ 1 kΩ - voltage span at FN V 10 Cut-off frequency (-3dB) Hz 16 Zero point (in the range of) V -5 to -3 Nominal temperature range °C 5 to 50 Operational temperature range °C -10 to 50 Storage temperature range °C -30 to 70 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,2 - on the calibration (TKC) % FN < ±0,15 Creep after 30 minutes % FN < ±0,05 Linear output signal up to % FN approx. 125 Mech. overload protection takes effect at % FN approx. 140 Overload protected % FN > 1000 Typ. deflection at nominal force % FN 0,07 Typ. natural frequency of the sensor kHz 1,5 Weight g approx. 160 Connector male socket, Ø 8 mm, 4-pole, snap-on type gold-plated contacts Sensor housing aluminium Protection class IP54 in conjunction with sealing gas Downloads OTSE-CF Carbon Fiber Tension Sensor - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/otse-cf-on-line-tension-sensor-p-731.html Thu, 13 Jan 2022 16:23:52 +0000 USD 731 1000 OTSE-CF https://www.abqindustrial.net/store/images/OTSE-CF2.jpg ]]> RFS100 Compact On-Line Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs100-compact-on-line-tension-sensor-p-732.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=732 ]]>On-line Tension Sensor 0 to 40N capacity stackable, easy installation on carrier rail RFS stands for enduring online precision. The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of: The force introduction point, i.e. the sensor is not affected by lever arm action Any axial tilt torques which might appear Direct axial forces The functional principle makes for superb sensitivity while at the same time offering enormous performance capabilities. The force acting radially at the bearing journal, along the measurement vector, causes a microscopically small, elastic deformation of the complex load cell. This deformation is registered at an exactly pre-determined position by way of strain gauges and is then evaluated electronically. The high mechanical stiffness of the load cell enables measurement with virtually no excursion. This tension measurement principle is based on the evaluation of the force applied radially and transferred to the sensor by way of the bearing journal. This force is determined by the reversing geometry and the line tension. Features Extremely compact and small design - for 16mm mounting hole. Overload protection up to 800%. No influence of any axial tilt torques or direct axial forces which might appear. Robust, stainless steel housing. existing reversing points can be adapted as measurement points. Independent of the force introduction point, i.e. the sensor is not affected by lever arm action. Centrifugal force will take no affect with optimal alignment in rotating purposes. Thought-through concept of housing for simple mounting Downloads RFS100 Compact On-Line Tension Sensor - Calculating Load RFS100 Compact On-Line Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs100-compact-on-line-tension-sensor-p-732.html Thu, 13 Jan 2022 16:26:22 +0000 USD 732 1000 RFS100 https://www.abqindustrial.net/store/images/RFS100.jpg ]]> RFS150-XY Radial Force Sensor With 2 Measuring Axis https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs150-xy-radial-force-sensor-with-2-measuring-axis-p-733.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=733 ]]>Radial force sensor with 2 measuring axis Available in 14 rated load ranges: 0 - 5N to 0 - 1000N The dual-axis radial force sensor offers two measuring axis, vertically to each other. Force introduction occurs radially at the bearing journal. Any acting force can be splitted vectorially into X- and Y-components. Fields of application: For research and industry Acquisition of axle loads, bearing reactions and unbalances XY-force measurement on shafts and axles force measurement on pivot joints and crankshafts Recording of polar force diagrams The high mechanical stiffness of the load cell enables measurement with virtually no excursion The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of direct axial forces Both force signals get conditioned with a 2-channel measuring amplifier solution. Value and direction of the acting force are acquired. For analysis the data can be stored in the PC, e.g. with the software HCC-Easy. Its export function enables the user to transfer the data to further software for extended analysis, e.g. generating a XY-diagram. Example: Polar diagram of the force in a crankshaft, force components against angle of rotation Features 2 measuring axis, vertically to each other. Independent of the force introduction point, i.e. the sensor is not affected by lever arm action. Thought-through concept of housing for simple mounting. High overload protection. No influence of any axial tilt torques or direct axial forces which might appear. Robust, stainless steel housing Specifications Measuring Principle Strain Gauge Accuracy ±0.5% Full Scale or better Sensor Excitation 10 VDC (12 VDC, max.) Sensor Output 1.5 mV/V Input Resistance 350 Ohms Output Resistance 350 Ohms Overload Protection 400 - 800% Deflection 0.07mm (max.) Housing Material Stainless Steel Environmental Protection IP50 (Splash-Proof) Cable Type 4.5 mm diameter shielded cable with bare leads Cable Length 10 ft. (3 meter), longer lengths available. Inquire Operating Temperature 15 to 155° F (-10 to 70° C) Sensor Excitation 19 - 28 VDC (24 VDC recommended @ 36 mA) Sensor Output 0 - 10 VDC (standard) 4 - 20 mA (optional) Fequency Responce 5 msec (200 Hz) Zero Adjustment ±45% Weight 500g Ranges RFS-100 0-100 g (0.00-0.22 lbs) RFS-5K 0-5 Kg (0.00-11.0 lbs) RFS-200 0-200 g (0.00-0.44 lbs) RFS-10K 0-10 Kg (0.00-22.0 lbs) RFS-500 0-500 g (0.00-1.10 lbs) RFS-20K 0-20 Kg (0.00-44.0lbs) RFS-1K 0-1 Kg (0.00-2.20 lbs) RFS-50K 0-50 Kg (0.00-110 lbs) RFS-2K 0-2 Kg (0.00-4.40 lbs) RFS-100K 0-100 Kg (0.00-220.0 lbs) Downloads RFS150-XY Radial Force Sensor With 2 Measuring Axis - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs150-xy-radial-force-sensor-with-2-measuring-axis-p-733.html Thu, 13 Jan 2022 16:26:23 +0000 USD 733 1000 RFS150-XY https://www.abqindustrial.net/store/images/RFS150-XY.jpg ]]> RFS-BB Radial force measuring axle https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs-bb-radial-force-measuring-axle-p-734.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=734 ]]>Radial force measuring axle or web tension measurement available in 15 rated load ranges: 0 to 100N ... 0 to 5000N For web tension measurement - precise and on-line Features Based on the established tension sensor RFS 150 Esp. designed for web tension measurement in combination with internal bearings without contiuous axle Available in 15 rated load ranges: 0 to 100N ... 0 to 5000N Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rfs-bb-radial-force-measuring-axle-p-734.html Thu, 13 Jan 2022 16:26:21 +0000 USD 734 1000 RFS-BB https://www.abqindustrial.net/store/images/RFS-BB.jpg ]]> RMA Radial Force Measuring Axle https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-radial-force-measuring-axle-p-735.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=735 ]]>Call for Price Radial Force Measuring Axle Ranges from 0 - 200 N to 0 - 1200 N RMAsensors are used for direct tension measurement in moving webs ofpaper, films, foils, textiles or metals.The bearing journal supportsrolls with internal mounting. Measurement of the web tension is effectedby registering at both sides the radial bearing forces on a web guidingroll. Defined and setpoint controlled web tension ensures high product quality and is the basis for a minimum of machine down-times. The compact RMA sensors in connection with a web guiding roll fulfill 3 functions at once: measurement of tension in the web bearing of the shafts and rolls guiding and deflecting the product web Features Direct, radial force transfer High spring constants for the sensor permit high rotation speed ratings for the deflector roll Nominal forces differing from standard Advanced temperature range Easy installation thanks to flange mounting High precision and excellent long-term stability Sensor housing and measuring cell made out of stainless steel, for use in humid environment Specifications Rated measuring ranges (FN) N 0...100; 0...300; 0…600; 0...1200; 0…2000 Rated output mV/V 0,7 Rated output tolerance % < ±0,2 Accuracy class 0,2 Accumulated error % FN < ±0,2 Excitation voltage max. V 12 Reference excitation voltage V 4,5 Input resistance Ω 350 ± 3 Output resistance Ω 350 ± 2 Isolation resistance GΩ > 5 Nominal temperature range °C 0…50 Operational temperature range °C -10…70 Storage temperature range °C -30…90 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,1 - on the calibration (TKC) % FN < ±0,2 Creep after 30 minutes % FN < ±0,1 Relative reversal error % FN < ±0,2 Service load % FN 300 Ultimate load % FN 400 Breaking load % FN > 500 Ultimate side load % FN 300 Dynamic load limit (DIN 50100) % FN 50 Axial torsional moment limit Nm 35 Deflection at nominal force mm < 0,04 Natural frequency of the sensor kHz > 2 Weight g ca. 450 Surface protection black-finished Protection class IP 54 Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA-DS Radial Force Measuring Axle Direct, radial force transfer High spring constants for the sensor permit high rotation speed ratings for the deflector roll TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads RMA Radial Force Measuring Axle - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-radial-force-measuring-axle-p-735.html Thu, 13 Jan 2022 16:26:24 +0000 USD 735 1000 RMA https://www.abqindustrial.net/store/images/RMA.jpg ]]> RMA-CSW Cantilever Measuring Roll https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-csw-cantilever-measuring-roll-p-736.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=736 ]]>Cantilever Measuring Roll Ranges from 0 - 200 N to 0 - 1200 N RMA-CSWCantilever measuring rolls are used for direct tension measurement inmoving webs of paper, films, foils, textiles or metals. Defined andsetpoint controlled web tension ensures high product quality and is thebasis for a minimum of machine down-times. The compact RMA-CSW measuring rolls fulfill 2 functions at once: measurement of tension in the web guiding and deflecting the product web Features Single-side flange mounting High overload protection by mechanical fixed stop Easy-turning roller bearings with lifetime lubrication Integrated Direction Adjuster provides precise and stepless direction adjustment of measurement axis, when the sensor roll is installed Direct radial force transfer Specifications Rated measuring ranges (FN) N 0...100; 0...300; 0…600; 0…1200 Rated output mV/V 0,7 Rated output tolerance % < ±0,2 Accuracy class 0,2 Accumulated error % FN < ±0,2 Excitation voltage max. V 12 Reference excitation voltage V 4,5 Input resistance Ω 350 ±3 Output resistance Ω 350 ±2 Isolation resistance GΩ > 5 Nominal temperature range °C 0…50 Operational temperature range °C -10…70 Storage temperature range °C -30…90 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,1 - on the calibration (TKC) % FN < ±0,2 Creep after 30 minutes % FN < ±0,1 Relative reversal error % FN < ±0,2 Service load % FN 300 Ultimate load % FN 400 Breaking load % FN > 500 Ultimate side load % FN 300 Dynamic load limit (DIN 50100) % FN 50 Axial torsional moment limit Nm 35 Deflection at nominal force mm < 0,04 Natural frequency of the sensor kHz depending on roll geometry and nominal force Weight g ca. 1800, depending on roll geometry Connection cable 3 m long, flexible, shielded, 4 x 0,14 mm², total-Ø 4,5 mm Surface protection black-finished Protection class IP 54 Downloads RMA-CSW Cantilever Measuring Roll - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-csw-cantilever-measuring-roll-p-736.html Thu, 13 Jan 2022 16:26:25 +0000 USD 736 1000 RMA-CSW https://www.abqindustrial.net/store/images/RMA-CSW.jpg ]]> RMA-DS Radial Force Measuring Axle https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-ds-radial-force-measuring-axle-p-737.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=737 ]]>Radial Force Measuring Axle Ranges from 0 - 200 N to 0 - 1200 N RMAsensors are used for direct tension measurement in moving webs ofpaper, films, foils, textiles or metals.The bearing journal supportsrolls with internal mounting. Measurement of the web tension is effectedby registering at both sides the radial bearing forces on a web guidingroll. Defined and setpoint controlled web tension ensures high product quality and is the basis for a minimum of machine down-times The compact RMA sensors in connection with a web guiding roll fulfill 3 functions at once measurement of tension in the web bearing of the shafts and rolls guiding and deflecting the product web Features Direct, radial force transfer High spring constants for the sensor permit high rotation speed ratings for the deflector roll Nominal forces differing from standard Advanced temperature range Easy installation thanks to flange mounting High precision and excellent long-term stability Sensor housing and measuring cell made out of stainless steel, for use in humid environment Specifications Rated measuring ranges (FN) N 0...100; 0...300; 0…600; 0...1200; 0…2000 Rated output mV/V 0,7 Rated output tolerance % < ±0,2 Accuracy class 0,2 Accumulated error % FN < ±0,2 Excitation voltage max. V 12 Reference excitation voltage V 4,5 Input resistance Ω 350 ± 3 Output resistance Ω 350 ± 2 Isolation resistance GΩ > 5 Nominal temperature range °C 0…50 Operational temperature range °C -10…70 Storage temperature range °C -30…90 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,1 - on the calibration (TKC) % FN < ±0,2 Creep after 30 minutes % FN < ±0,1 Relative reversal error % FN < ±0,2 Service load % FN 300 Ultimate load % FN 400 Breaking load % FN > 500 Ultimate side load % FN 300 Dynamic load limit (DIN 50100) % FN 50 Axial torsional moment limit Nm 35 Deflection at nominal force mm < 0,04 Natural frequency of the sensor kHz > 2 Weight g approx. 2000 Surface protection black-finished Protection class IP 54 Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads RMA-DS Radial Force Measuring Axle - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/rma-ds-radial-force-measuring-axle-p-737.html Thu, 13 Jan 2022 16:26:25 +0000 USD 737 1000 RMA-DS https://www.abqindustrial.net/store/images/RMA-DS.jpg ]]> WTS Shaft-end Web Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wts-shaft-end-web-tension-sensor-p-739.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=739 ]]>Online Measuring bearing Ranges from 0 - 50 N to 0 - 5000 N WTS Web Tension Sensors are used for direct tension measurement in moving webs of paper, films, foils, textiles or metals. Measurement of the precise web tension is accomplished by determining the resulting force that the web directs on to the guide roller connected to these shaft-end sensors mounted at each end of the roller. It is widely accepted that a well-controlled web operating at defined tension values assures the highest possible end-product quality and is the basis for insuring minimum machine down-times. The compact WTS sensors in connection with a web guiding roll fulfill 3 functions at once: Precise measurement of web tension Guides and deflects the web Provides bearings for the shafts and rolls Features Entire sensor housing as well as the measuring cell are fabricated from stainless steel permits use in the toughest production environments including use in hi-humidity environments. Extremely rugged design is well protected against overloads using integrated mechanical overload stops. Extended operating temperature range is standard. Custom mounting provisions are available. Quick and easy installation due to a variety of clever mounting options: inboard or outboard attachment, flange or pillow block. Special sensor design elements, including high spring constants allows for highest web speeds without affecting the signal quality. Can be installed in vacuum environments without any modification Specifications Rated measuring ranges (FN) for construction size BG1 to BG4 N 0 to 50…0 to 5000 Measuring principle full strain gauge bridge Rated output mV/V 1,0 Rated output tolerance % < ±0,2 Accuracy class 0,1 Excitation voltage max. V 12 Reference excitation voltage V 10 Input resistance Ω 350 ±3 Output resistance Ω 350 ±1 Isolation resistance GΩ > 10 Rated temperature range °C 5 to 50, option: -10 to 70 Operational temperature range - sensor °C -10 to 70 - connection cable °C -30 to 80 Storage temperature range °C -30 to 70 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,1 - on the calibration (TKC) % FN < ±0,15 Creep after 30 minutes % FN < ±0,05 Linear output signal up to % FN approx. 150 Mech. overload protection takes effect at % FN approx. 180 Overload protected¹ % FN 400-800 (depending on nominal force) Ultimate side load % FN 200 Deflection at nominal force mm 0,10 ±20% Connection cable 5 m long, flexible, shielded, 4 x 0,25 mm², total-Ø 4,7 mm Sensor housing high-tensile steel, black finishing Protection class IP 54 Ranges Model Range Range g/Kg (lbs) WTM-1R-200 0-2 N 0-200 g (0.00-0.44 lbs) WTM-1R-400 0-4 N 0-400 g (0.00-0.88 lbs) WTM-1R-1K 0-10 N 0-1 Kg (0.00-2.20 lbs) WTM-1R-2K 0-20 N 0-2 Kg (0.00-4.40 lbs) WTM-1R-4K 0-40 N 0-4 Kg (0.00-8.80lbs) WTM-1R-10K 0-100 N 0-10 Kg (0.00-22.0 lbs) WTM-1R-20K 0-200 N 0-20 Kg (0.00-44.0 lbs) WTM-1R-40K 0-400 N 0-40 Kg (0.00-88.0 lbs) WTM-1R-100K 0-1000 N 0-100 Kg (0.00-220.0 lbs) WTM-1R-200K 0-2000 N 0-200 Kg (0.00-440.0 lbs) Downloads WTS Shaft-end Web Tension Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/wts-shaft-end-web-tension-sensor-p-739.html Thu, 13 Jan 2022 16:29:48 +0000 USD 739 1000 WTS https://www.abqindustrial.net/store/images/WTS.jpg ]]> SK 224 FM High-Capacity, Radial Force Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/sk-224-fm-high-capacity-radial-force-online-tension-sensor-p-764.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=764 ]]>High-Capacity, Radial Force Online Tension Sensor 3 Ranges up to 1500 KG 3 Ranges 500 KG (1100 LBS/5000N) 1000 KG (2200 LBS/10000N) 1500 KG (3300 LBS/15000N) Features Designed as a single-roller system -uses an existing reversing point for tension measurement. Rugged stainless steel housing is environmentally sealed. Supplied with a 10 ft. (3 m) shielded cable. Optional lengths are available. System of protection IP67 - waterproof. Overload protection up to 800%. Resolution of 0.1% and better Specifications Measuring Ranges 500 KG (1100 LBS/5000N) 1000 KG (2200 LBS/10000N) 1500 KG (3300 LBS/15000N) Measuring Principle Strain Gauge Accuracy ±0.5% Full Scale or better Sensor Excitation 10 VDC (12 VDC, max.) Sensor Output 1.5 mV/V Input Resistance 1000 Ohms Output Resistance 1000 Ohms Overload Protection 400 - 800% Deflection 0.07mm (max.) Housing Material Stainless Steel Environmental Protection IP67 (Water-Proof) Cable Type 4.5 mm diameter shielded cable with bare leads Cable Length 10 ft. (3 meter), longer lengths available. Inquire Operating Temperature 15 to 122° F (-10 to 50° C) Sensor Excitation 19 - 28 VDC (24 VDC recommended @ 36 mA) Sensor Output 0 - 10 VDC (standard) 4 - 20 mA (optional) Fequency Responce 5 msec (200 Hz) Zero Adjustment ±45% Weight 1100g Related Products RMA-CSW Cantilever Measuring Roll Direct, radial force transfer High precision and excellent long-term stability RMA Radial Force Measuring Axle High spring constants for the sensor permit high rotation speed ratings for the deflector roll High precision and excellent long-term stability TS621 Strain Gauge Amplifier Designed for use with a wide range of strain-gauge-based force, load and tension sensors 0-10VDC analog output DPM502 Digital Tension Indicator Selectable “damping function” reduces display fluctuations 24V DC power supply with galvanic isolation MU621 Tension Indicator/Amplifier Console For strain gauge sensors 1 to 4 measuring channels Downloads SK 224 FM High-Capacity, Radial Force Online Tension Sensor - Dimension SK 224 FM High-Capacity, Radial Force Online Tension Sensor - Specification Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/sk-224-fm-high-capacity-radial-force-online-tension-sensor-p-764.html Thu, 13 Jan 2022 16:26:27 +0000 USD 764 1000 SK 224 FM https://www.abqindustrial.net/store/images/SK-224.jpg ]]> TS2 Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2-online-tension-sensor-p-937.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=937 ]]>Universal Tension Sensor for yarns, fibers, thin wires etc. for yarns, fibers, thin wires etc 10 Tension Ranges from 0-50 g to 0-50 kg Universal Tension Sensor for yarns, fibers, thin wires etc. 10 Tension Ranges from 0-50 g to 0-50 kg New designed tension sensor to measure accurately the running tension of wires, cables, yarns, tibers and similar process material. Mounting possibilities: Fixing housing on a flat platform or mounting the front plate Features Accuracy of 2 % Full scale or better. Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting. Aluminum housing. Mechanical overload protection. Ball-Bearing mounted, V grooved guide rollers Specifications Accuracy ± 2% Full Scale and 1 digit or better Overload Protection 100% of tension range Measuring Principle Strain guage bridge Meas. Roller Defelction 0.5 mm, max Output Signal Standard: 0 - 1 V DC (analog) Option: 0 - 10 V DC Option: USB Damping Standard: 30 Hz (other values on request) Temperature Drift Less than ± 0.1% Full Scale / °C Temperature Range 10 - 45 °C Air Humidity 85% RH, max Power Required +15 ... 24 V DC, 50 mA (regulated) Housing Material Aluminum Weight net (gross) Approx. 300 g (800 g) Delivery Includes Connector with 2 m cable with open ends Ranges Model Range *MeasuringHead Width **CalibrationMaterial TS2-50 0 - 50 g 64 mm PA: 0.12 mm Ø TS2-100 0 - 100 g 64 mm PA: 0.12 mm Ø TS2-200 0 - 200 g 64 mm PA: 0.12 mm Ø TS2-500 0 - 500 g 64 mm PA: 0.20 mm Ø TS2-1K 0 - 1000 g 64 mm PA: 0.30 mm Ø TS2-2K 0 - 2000 g 124 mm PA: 0.50 mm Ø TS2-5K 0 - 5000 g 124 mm PA: 0.80 mm Ø TS2-10K 0 - 10 kg 124 mm PA: 1.00 mm Ø TS2-20K 0 - 20 kg 224 mm PA: 1.50 mm Ø TS2-50K 0 - 50 kg 224 mm PA: 1.50 mm Ø Other tensions ranges and measuring head widths available on request * Outside dimensions of front plate ** Suitable for 95 % of applications PA = Polyamide Monofi lament Guide Rollers V-Groove Line SpeedVmax...m/min Roller Material Standard 2000 Hardcoated aluminum Code K 3500 Hardcoated aluminum Code H 5000 Plasma-coated aluminium (for model TS2-100 and higher ranges) Code ST 1000 Hardened Steel Code B 1000 Tempered steel, specially for measuring tire cordaluminum Code CE1 1000 Ceramic Code ASY* 1000 Hardcoated aluminium, asymetrical groove Code ASYB* 1000 Tempered steel for tire cord, asymetrical groove * for TS2-500 and higher ranges with measuring head width 124 mm Output Signal Models Standard 0 - 1 V DC (analog) Option Code A2: 0 - 10 V DC Option Code USB: digital USB Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TS2 Online Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2-online-tension-sensor-p-937.html Thu, 13 Jan 2022 16:28:32 +0000 USD 937 Mark-10 1000 TS2 https://www.abqindustrial.net/store/images/TS2.jpg 10 Tension Ranges from 0-50 g to 0-50 kg

]]> TS2H Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2h-online-tension-sensor-p-938.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=938 ]]>Tension sensors for flexible wire, plastic tubing and other materials up to 8 mm Ø 6 tension ranges from 0 - 1000 g to 0 - 50 kg 6 tension ranges from 0 - 1000 g to 0 – 50 kg Tension sensors for flexible wire, plastic tubing and other materials up to 8 mm Ø Mounting possibilities: Fixing housing on a fl at platform or mounting the front plate Features Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting Ball-Bearing mounted, V grooved guide rollers Accuracy of 2 % Full scale or better Mechanical overload protection Aluminum housing Guide rollers 30 mm Ø, available with V- or U-groove Specifications Accuracy ± 2% Full Scale and 1 digit or better Overload Protection 100% of tension range Measuring Principle Strain guage bridge Meas. Roller Defelction 0.5 mm, max Output Signal Standard: 0 - 1 V DC (analog) Option: 0 - 10 V DC Option: USB Damping Standard: 30 Hz (other values on request) Temperature Drift Less than ± 0.1% Full Scale / °C Temperature Range 10 - 45 °C Air Humidity 85% RH, max Power Required +15 ... 24 V DC, 50 mA (regulated) Housing Material Aluminum Weight net (gross) Approx. 500 g (1000 g) Delivery Includes Connector with 2 m cable with open ends Ranges Model Range *Measuring Head Width **Calibration Material TS2H-1K 0 - 1000 g 150 mm PA: 0.30 mm Ø TS2H-2K 0 - 2000 g 150 mm PA: 0.50 mm Ø TS2H-5K 0 - 5000 g 150 mm PA: 0.80 mm Ø TS2H-10K 0 - 10 kg 200 mm PA: 1.00 mm Ø TS2H-20K 0 - 20 kg 250 mm PA: 1.50 mm Ø TS2H-50K 0 - 50 kg 250 mm PA: 1.50 mm Ø Other tensions ranges and measuring head widths available on request. * Outside dimensions of front plate ** Suitable for 95 % of applications PA = Polyamide Monofi lament Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 4000 Hardened Steel U-grooved Code R1 4000 Hardened Steel (radius 5) Output Signal Models Standard 0 - 1 V DC (analog) Option Code A2: 0 - 10 V DC Option Code USB: digital USB Other roller materials (nickel-Plated steel or plastic) are available on request Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TS2H Online Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2h-online-tension-sensor-p-938.html Thu, 13 Jan 2022 16:28:33 +0000 USD 938 Checkline 1000 TS2H https://www.abqindustrial.net/store/images/TS2H.jpg 6 tension ranges from 0 - 1000 g to 0 - 50 kg

]]> TS2L Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2l-tension-sensor-p-939.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=939 ]]>Stationary electronic tension sensors for measuring sensitive materials as optical fibres, carbon fibres, technical fibres etc 5 tension ranges from 0 - 50 g to 0 - 1000 g 5 tension ranges from 0 - 50 g to 0 - 1000 g Stationary electronic tension sensors for measuring sensitive materials as optical fibres, carbon fibres, technical fibres etc Large, smooth running guide rollers for minimized material deflection with 32 mm groove Universal mounting possibility: Housing mounting or cylindrical hole mounting (mounting cut out 38.5 - 40 mm) Features Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting Smooth running, V-grooved guide rollers, ball-bearing mounted Large bending radius for gentle handling of sensitive material Mechanical overload protection Easy calibration to customized material by operator Best suitable for low tension ranges Specifications Accuracy ± 1% Full Scale and 1 digit or better Overload Protection 100% of tension range Measuring Principle Strain guage bridge Meas. Roller Defelction 0.5 mm, max Natural frequency Approx. 500 Hz, depending on tension range Output Signal Standard: 0 - 1 V DC (analog) impedance: > 5 k? Option: 0 - 10 V DC (analog) Damping Standard: 30 Hz (other values on request) Temperature Range 10 - 45 °C Air Humidity 85% RH, max Power Required +15 ... 24 V DC, 50 mA (regulated) Housing Material Aluminum Weight net (gross) Approx. 340 g (440 g) Ranges Model Range *Measuring Head Width **Calibration Material TS2L-50 0 - 50 g 150 mm PA: 0.12 mm Ø TS2L-100 0 - 100 g 150 mm PA: 0.12 mm Ø TS2L-200 0 - 200 g 150 mm PA: 0.12 mm Ø TS2L-500 0 - 500 g 150 mm PA: 0.20 mm Ø TS2L-1000 0 - 1000 g 150 mm PA: 0.30 mm Ø Other tensions ranges and measuring head widths available on request. * Outside dimensions of front plate ** Suitable for 95 % of applications PA = Polyamide Monofi lament Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 4000 Hardened Steel Code T 4000 Plastic red (PVC) Other roller materials (nickel-Plated steel or plastic) are available on request Output Signal Models Standard 0 - 1 V DC (analog) Option Code A2: 0 - 10 V DC Option Code A3: 4 - 20 mA DC Option Code RS 422: digital RS 422 max. 32 sensors can be connected in line to a PC Other roller materials (nickel-Plated steel or plastic) are available on request Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TS2L Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2l-tension-sensor-p-939.html Thu, 13 Jan 2022 16:28:34 +0000 USD 939 Checkline 1000 TS2L https://www.abqindustrial.net/store/images/TS2L.jpg 5 tension ranges from 0 - 50 g to 0 - 1000 g

]]> TS2B Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2b-tension-sensor-p-940.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=940 ]]>Stationary electronic tension sensor for measuring low tensions of textile ribbons, films, foils, fibre bunches etc 6 tension ranges from 0 - 100 g up to 0 - 5000 g 6 tension ranges from 0 - 100 g up to 0 - 5000 g Stationary electronic tension sensor for measuring low tensions of textile ribbons, films, foils, fibre bunches etc. Zylindrical tape rollers with up to max. 20 mm width, one-sided mounting Universal mounting possibility: Housing mounting or cylindrical hole mounting (mounting cut out 38.5 - 40 mm) Features Tension sensor with integrated measuring amplifier Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting Mechanical overload protection Easy calibration to customized material by operator Various roller widths from 7 mm up to 20 mm Specifications Accuracy ± 1% Full Scale and 1 digit or better Overload Protection 100% of tension range Measuring Principle Strain guage bridge Meas. Roller Defelction 0.5 mm, max Natural frequency Approx. 500 Hz, depending on tension range Output Signal Standard: 0 - 1 V DC (analog) impedance: > 5 k? Option: 0 - 10 V DC (analog) Damping Standard: 30 Hz (other values on request) Temperature Range 10 - 45 °C Air Humidity 85% RH, max Power Required +15 ... 24 V DC, 50 mA (regulated) Housing Material Aluminum Ranges Model Range *MeasuringHead Width **CalibrationMaterial TS2B-100 0 - 100 g 60 mm 7 mm, 10 mm, 15 mm, 20 mm TS2B-200 0 - 200 g 60 mm 7 mm, 10 mm, 15 mm, 20 mm TS2B-500 0 - 500 g 60 mm 7 mm, 10 mm, 15 mm, 20 mm TS2B-1000 0 - 1000 g 60 mm 7 mm, 10 mm, 15 mm, 20 mm TS2B-2000 0 - 2000 g 120 mm 7 mm, 10 mm, 15 mm, 20 mm TS2B-5000 0 - 5000 g 120 mm 7 mm, 10 mm Other tensions ranges available on request. ** Outside dimensions of front plate Important for your order: Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order. Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material 7 mm 1000 Nickel-plated steel 10 mm 1000 Hardcoated aluminium 15 mm 1000 Hardcoated aluminium 20 mm 1000 Hardcoated aluminium Output Signal Models Standard 0 - 1 V DC (analog) Option Code A2: 0 - 10 V DC Option Code A3: 4 - 20 mA DC Option Code RS 422: digital RS 422 max. 32 sensors can be connected in line to a PC Related Products TD-1-TE Tension Indicator User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose Downloads TS2B Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2b-tension-sensor-p-940.html Thu, 13 Jan 2022 16:28:33 +0000 USD 940 Checkline 1000 TS2B https://www.abqindustrial.net/store/images/TS2B.jpg 6 tension ranges from 0 - 100 g up to 0 - 5000 g

]]> TS2P Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2p-tension-sensor-p-941.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=941 ]]>Call for Price Stationary electronic tension sensors with non-rotating ceramic pins for threads and fibres 5 tension ranges from 0 - 50 g up to 0 - 1000 g 5 tension ranges from 0 - 50 g up to 0 - 1000 g Stationary electronic tension sensors with non-rotating ceramic pins for threads and fibres Features Universal mounting possibility - easy to install: Housing mounting or cylindrical hole mounting Non-rotating, exchangeable ceramic pins for line speed up to max. 6000 m/min Usable for threads and fibres only Analog output signal Easy calibration to customized material by operator Tension sensor with mechanical overload protection Specifications Accuracy ± 1% Full Scale and ± 1 digit or better Overload Protection 100% of tension range Measuring Principle Strain guage bridge Meas. Roller Defelction 0.5 mm, max Natural frequency Approx. 500 Hz, depending on tension range Output Signal Standard: 0 - 1 V DC (analog) impedance: > 5 Option: 0 - 10 V DC (analog) Damping Standard: 30 Hz (other values on request) Temperature Range 10 - 45 °C Air Humidity 85% RH, max Power Required +15 ... 24 V DC, 50 mA (regulated) Housing Material Aluminum Weight net (gross) Approx. 220 g (320 g) Tension Ranges Model Range *Measuring Head Width **Calibration Material TS2P-50 0 - 50 g 64 mm PA: 0.12 mm ⌀ TS2P-100 0 - 100 g 64 mm PA: 0.12 mm ⌀ TS2P-200 0 - 200 g 64 mm PA: 0.12 mm ⌀ TS2P-500 0 - 500 g 64 mm PA: 0.20 mm ⌀ TS2P-1000 0 - 1000 g 64 mm PA: 0.30 mm ⌀ Other tensions ranges and measuring head widths available on request. * Outside dimensions of front plate ** with running filament approx. 300 m/min. Suitable for 95 % of applications PA = Polyamide Monofi lament Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 6000 Oxid ceramic ⌀ 5.2 mm Output Signal Models Standard 0 - 1 V DC (analog) Option Code A2: 0 - 10 V DC Option Code A3: 4 - 20 mA DC Option Code RS 422: digital RS 422 max. 32 sensors can be connected in line to a PC Dimensions Downloads TS2P Tension Sensor - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/ts2p-tension-sensor-p-941.html Thu, 13 Jan 2022 16:28:35 +0000 USD 941 Checkline 1000 TS2P https://www.abqindustrial.net/store/images/TS2P.jpg 5 tension ranges from 0 - 50 g up to 0 - 1000 g

]]> 136-3-SCF Thin Wire Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/136-3-scf-thin-wire-tension-sensor-p-942.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=942 ]]>For use in Closed Force System Applications ONLY Tension Ranges up to 100Kg / 220Lbs Built-in Diameter Compensation from 0.1 - 5.5 mm (0.004" - 0.217") 4 ranges available - Ranges up to 3 kN (675 lbs) Material Diameters - 0.1 - 5.5 mm (0.004" - 0.217") The 136-3-SCF-DC is especially-designed for use in Closed Force System (CFS) applications, where both ends of the material are fixed. This sensor is designed so the cable will pass under the 1st roller and over the center and last roller. This design applies a minimal break angle of the material over the center sensing roller minimizing the error caused by the presence of the tension sensor With traditional 3-Roller systems where the material travels under/over the rollers in the illustration above, a significant error is generated by the presence of the tension sensor increasing the tension dramatically --- as soon as the sensor is installed. The unique design concept of 136-3-SCF-DC eliminates this problem and provides the only accurate means of measuring tension in these types of applications. The accuracy of this sensor is further enhanced by its built-in diameter compensator adjustment. The operator simply adjusts the diameter compensator to equal the diameter of the process material being measured and the calibration is automatically adjusted for highest accuracy. The typical measuring error is less than 1%. Kit Contents 136-3-SCF-DC Thin Wire Tension Sensor Yarns & Filaments Brake Cables Aircraft Cables Architectures Cables Wires / Cables up to 5mm diameter Features Built-in Diameter Compensator for material diameters 0.1 - 5.5 mm (0.004" - 0.217") Minimal sensor influence on the tension by utilizing the smallest deflection angle possible High accuracy and reproducibility Small angle of material bending, therefore No damage of the material Very low additional tension during measurement 190 mm clearence required along the length of the process material to place tension meter Applications: Tension Measurement: Thin stay ropes and cables Thin static wires Thin pre-loaded wire ropes, steel wire ropes Aircraft support cables Overhead cables Range of application: String tension of musical instruments Wire EDM machines Airplane manufacturing Downloads 136-3-SCF-DC Thin Wire Tension Sensor- Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/136-3-scf-thin-wire-tension-sensor-p-942.html Thu, 13 Jan 2022 16:23:48 +0000 USD 942 Checkline 1000 136-3-SCF https://www.abqindustrial.net/store/images/136-3-SCF.jpg Tension Ranges up to 100Kg / 220Lbs

Built-in Diameter Compensation from 0.5 - 5 mm (0.020" - 0.200")

]]> 137-4 Thin Wire Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/137-4-thin-wire-tension-sensor-p-943.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=943 ]]>Handheld Precision Tension Measurement 6 ranges 0 - 100 g up to 0 - 5 kg 6 Ranges 0 - 100 g up to 0 - 5 kg The design of this measuring head was selected to satisfy the special needs of the optical fibers industry. In the field of research and quality control itsapplications range from the crucible to re-reeling stations, from the extrusion process through cable jacketing and twisting machines, etc Features for measurement of optical fibres, sensitive wires up to 3.5mm Ø easy-running pulleys with precision bearings; with polished, large diameter contact surface gentle on the material; easy to thread even while the process is running effective overload protection means high availability for customer operations very small angle of contact, only 5° fiber is not diverted from its path high precision and excellent long-term stability Related Products D-485 Digital Tension Indicator with Built-In Amplifier Automatic zero setting "Peak" function retains maximum reading on display TM-353 Analog Tension Indicator with Built-In Amplifier Provides 0-1 VDC analog output for recording purposes Downloads 137-4 Tension sensor - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/137-4-thin-wire-tension-sensor-p-943.html Thu, 13 Jan 2022 16:23:48 +0000 USD 943 Checkline 1000 137-4 https://www.abqindustrial.net/store/images/137-4.jpg 6 ranges 0 - 100 g up to 0 - 5 kg

]]> OTSE-CF Carbon Fiber Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/otse-cf-carbon-fiber-tension-sensor-p-944.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=944 ]]>On-line Tension Sensor 0 to 40N capacity stackable, easy installation on carrier rail The sensor OTSE-CF is designed especially for tension measurement on fiber ribbons and fiber bundles, e.g. Carbon Fiber (CFK). The compact design and the stackability allow an easy integration into a production line, e.g. behind an unwinding creel. Any grid spacing and grouping is realizable by customizing the carrier rail Features Compact design - only 22 mm wide Measures precisely and long-term stable Very high overload protection Geometry and surface of the sliding sleeve is optimized for carbon fiber bundles Definite product guidance and gentle surface coating Built-in measuring amplifier Exchangeable sliding sleeve Sophisticated system for easy installation on a carrier rail Robust aluminium housing Optional sealing gas connection Specifications Nominal force (FN) N 40 Accuracy class 0,5 max. wrap angle ° 60 Supply voltage range V 20 to 28 Current consumption (without load) mA approx. 36 Output - voltage range V 0 to ±12, RL ≥ 1 kΩ - voltage span at FN V 10 Cut-off frequency (-3dB) Hz 16 Zero point (in the range of) V -5 to -3 Nominal temperature range °C 5 to 50 Operational temperature range °C -10 to 50 Storage temperature range °C -30 to 70 Reference temperature °C 23 Temperature influence per 10 K - on the zero point (TK0) % FN < ±0,2 - on the calibration (TKC) % FN < ±0,15 Creep after 30 minutes % FN < ±0,05 Linear output signal up to % FN approx. 125 Mech. overload protection takes effect at % FN approx. 140 Overload protected % FN > 1000 Typ. deflection at nominal force % FN 0,07 Typ. natural frequency of the sensor kHz 1,5 Weight g approx. 160 Connector male socket, Ø 8 mm, 4-pole, snap-on type gold-plated contacts Sensor housing aluminium Protection class IP54 in conjunction with sealing gas Downloads OTSE-CF Carbon Fiber Tension Sensor - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/otse-cf-carbon-fiber-tension-sensor-p-944.html Thu, 13 Jan 2022 16:23:51 +0000 USD 944 Checkline 1000 OTSE-CF https://www.abqindustrial.net/store/images/OTSE-CF.jpg 0 to 40N capacity

stackable, easy installation on carrier rail

]]> EPS Electropneumatic actuator https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/eps-electropneumatic-actuator-p-945.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=945 ]]>EPS is a control dancer and used for tension control on winding of endless material. It is an active dancer system EPS is a control dancer and used for closed-loop tension control on winding of endless material. It is a considered and "active" dancer control system. EPS is operated as an electrically controlled P/F actuator providing a large range of adjustment for the user-set desired tension level The position of the dancer is measured by means of a rotary encoder, giving a standard output signal specially-designed to be able to maintain precise tension control even under high-dynamic speed variations Info Functionality using the example of a typical unwinding process: At the unwinder a motor-driven chuck supports the material roll. The following process needs material feeding with process-specific dynamic and well-defined tension. EPS serves as link between unwinder and process. The material is guided S-shaped over the dancer pulleys. A torque, which acts on the dancer, is generated electropneumatically. Tension Fz is proportional to the upcoming torque. The actual rotation angle of the dancer is output as electric signal. The dancer is in position control Material accumulator Additionally EPS functions as an accumulator. It can dispense or receive the material depending on the dancer position. Downloads EPS Electropneumatic Actuator - Data Sheet EPS Electropneumatic Actuator - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/eps-electropneumatic-actuator-p-945.html Thu, 13 Jan 2022 16:23:50 +0000 USD 945 Checkline 1000 EPS https://www.abqindustrial.net/store/images/EPS.jpg ]]> Pressure-Mate Cutting Force Measurement On Rotary Die Cutters https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/pressure-mate-cutting-force-measurement-on-rotary-die-cutters-p-946.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=946 ]]>Cutting Force Measurement On Rotary Die Cutters Application area is the adjustment of pre-tensioning force and the monitoring of cutting force in rotary die cutters. This is important for a reproducible cutting result and for a long operating life of the cutting unit. The Pressure Mate system consists of: two threaded spindles with built-in force sensors (Axial Force Sensor) a 2-channel measuring amplifier DMV 05. The cutting force is measured on both bearing positions of the cutting die and is displayed in kg. The analog output signal of the measuring amplifier is exactly proportional to the real periodic cutting force. It can be recorded and analyzed with HCC-Easy Software Info The correct adjustment of the pre-tensioning force and continuous monitoring of the cutting force minimizes the mechanical stress on: rotary cutting dies rotary anvils bearings toothed wheels supporting rollers An increasing cutting force due to temperature for example can be detected and re-adjusted immediately. Pressure Mate ensures constant high product quality, decreasing downtime and increasing operating life of the cutting dies. exemplary characteristics of cutting force In contrast to hydraulic gauges principally Pressure Mate has no mechanical elastic compliance. It´s a measurement without motion in order to avoid relative movement between rotary cutting die and rotary anvil. As a result of the sensor´s high mechanical stiffness the cutting process is very stable, free of vibration and precisely. Downloads Pressure-Mate Cutting Force Measurement On Rotary Die Cutters - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/pressure-mate-cutting-force-measurement-on-rotary-die-cutters-p-946.html Thu, 13 Jan 2022 16:23:53 +0000 USD 946 Checkline 1000 Pressure-Mate https://www.abqindustrial.net/store/images/Pressure-Mate.jpg ]]> TSC-Series COMPACT Online Tension Sensor for Limited https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsc-series-compact-online-tension-sensor-for-limited-p-1167.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1167 ]]>Online Tension Sensor Tension sensor with integrated measuring amplifier Stationary electronic tension sensor, single roller system, for mounting at an existing deflection pulley Large, hardened guide rollers for minimized material deflection with 29.5 mm groove ⌀ Tension meter is available with digital output for data processing with PC Features V-grooved guide rollers, ball-bearing mounted Tension sensor with integrated measuring amplifier Various output signals: analog, digital (optional), current (optional), analog DMS (optional) Many configurations are possible Easy calibration to customized material by operator Tension sensor with mechanical overload protection Wide variety of roller types can be specified Guide rollers 30 or 70 mm ⌀, made of Aluminium or steel In- and outcoming angle β min 20° Rugged aluminium housing Certificate of Compliance with the order 2.1 according EN 10204 is included Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report Specifications Accuracy factory calibration material: ±1 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Temperature drift Less than ±0.05 % full scale/°C Output signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 250 g (approx. 400 g) Available Models Model Resultant Force Capacity (G/KG) Resultant Force Capacity (Newtons) TSR-1000 1000 grams 10 N TSR-2000 2000 grams 20 N TSR-5K 5 Kg 50 N TSR-10K 10 Kg 100 N Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 4000 Hardened steel Code F 4000 Hard-coated aluminium Code FB 4000 Tempered steel Output Signal Standard Output signal: 0 - 1 VDC Click image for more information Code A2 Output signal: 0 - 10 VDC Click image for more information Code A3 Output signal: 4 - 20 mA DC Click image for more information Code A10 Output signal: mV/V for sensors without amplifier Click image for more information Code 232 Output signal digital: RS 232 analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Click image for more information Code 232-H Output signal digital: RS 232 analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Please contact us for details Click image for more information Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsc-series-compact-online-tension-sensor-for-limited-p-1167.html Thu, 13 Jan 2022 16:28:37 +0000 USD 1167 1000 TSC-Series https://www.abqindustrial.net/store/images/TSC-Series.jpg TSW Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsw-tension-sensor-p-1168.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1168 ]]>Stationary electronic tension sensor for measuring wires, ropes and cables up to 10 mm ⌀ 3 ranges up to 100 Kg Stationary electronic tension sensor for measuring wires, ropes and cables up to 10 mm ⌀ Sensor with large guide rollers (60 mm ⌀), minimizes material deflection Features Guide rollers 60 mm groove ⌀, V-grooved or U-grooved, ball-bearing mounted. Tension sensor with integrated measuring amplifier. Various output signals: analog, digital (optional), current (optional), analog DMS (optional). Easy calibration to customized material by operator. Tension sensor with mechanical overload protection. Tension sensor with rugged aluminum housing Specifications Accuracy ±1 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Temperature drift Less than ±0.05 % full scale/°C Output Signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 1500 g (approx. 1800 g) Available Models Model Range Measuring Head Width* Calibration Material TSW-20K 0 - 20 Kg 550 mm Steel rope 1.50 mm ⌀ (7x7x0.20) TSW-50K 0 - 50 Kg 550 mm Steel rope 3 mm ⌀ (6x7x0.30) TSW-100K 0 - 100 Kg 550 mm Steel rope 4 mm ⌀ (6x7x0.50) Other tension ranges available on request * Outside dimensions of front plate Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 2000 Hardcoated aluminium (radius R3) Code R2 2000 Hardcoated aluminium (radius R5) Output Signal Standard Output signal: 0 - 1 VDC Click image for more information Code A2 Output signal: 0 - 10 VDC Click image for more information Code A3 Output signal: 4 - 20 mA DC Click image for more information Code A10 Output signal: mV/V for sensors without amplifier Click image for more information Code 232 Output signal digital: RS 232 analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Click image for more information Code 232-H Output signal digital: RS 232 analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Please contact us for details Click image for more information Downloads TSW Tension Sensor - Dimensional Drawing Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsw-tension-sensor-p-1168.html Thu, 13 Jan 2022 16:29:42 +0000 USD 1168 1000 TSW https://www.abqindustrial.net/store/images/TSW%20Tension%20Sensor.jpg TSR Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsr-online-tension-sensor-p-1617.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1617 ]]>Online Tension Sensor Tension sensor with integrated measuring amplifier Stationary electronic tension sensor, single roller system, for mounting at an existing deflection pulley Large, hardened guide rollers for minimized material deflection with 29.5 mm groove ⌀ Tension meter is available with digital output for data processing with PC Features V-grooved guide rollers, ball-bearing mounted Tension sensor with integrated measuring amplifier Various output signals: analog, digital (optional), current (optional), analog DMS (optional) Many configurations are possible Easy calibration to customized material by operator Tension sensor with mechanical overload protection Wide variety of roller types can be specified Guide rollers 30 or 70 mm ⌀, made of Aluminium or steel In- and outcoming angle β min 20° Rugged aluminium housing Certificate of Compliance with the order 2.1 according EN 10204 is included Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report Specifications Accuracy factory calibration material: ±1 % full scale and ±1 digit other calibration material: ±3 % full scale or better Overload protection 100 % of tension range Measuring principle Strain gauge bridge Measuring roller deflection Max. 0.5 mm Natural frequency Approx. 500 Hz, depending on tension range Signal processing Analog (option: digital) Temperature drift Less than ±0.05 % full scale/°C Output signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ Option: 0 - 10 V DC (analog), 4 - 20 mA (current) or mV/V (DMS) digital RS 232 Damping (fg) Standard: 30 Hz (other values on request) Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply +15...24 V DC, max. 50 mA regulated Code A10: max. +5 V DC, max. 20 mA regulated Housing material Aluminium Weight, net (gross) Approx. 250 g (approx. 400 g) Available Models Model Resultant Force Capacity (G/KG) Resultant Force Capacity (Newtons) TSR-1000 1000 grams 10 N TSR-2000 2000 grams 20 N TSR-5K 5 Kg 50 N TSR-10K 10 Kg 100 N Guide Rollers V-Groove Line Speed Vmax...m/min Roller Material Standard 4000 Hardened steel Code F 4000 Hard-coated aluminium Code FB 4000 Tempered steel Output Signal Standard Output signal: 0 - 1 VDC Click image for more information Code A2 Output signal: 0 - 10 VDC Click image for more information Code A3 Output signal: 4 - 20 mA DC Click image for more information Code A10 Output signal: mV/V for sensors without amplifier Click image for more information Code 232 Output signal digital: RS 232 analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Click image for more information Code 232-H Output signal digital: RS 232 analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Please contact us for details Click image for more information Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/tsr-online-tension-sensor-p-1617.html Thu, 13 Jan 2022 16:29:41 +0000 USD 1617 1000 TSR https://www.abqindustrial.net/store/images/TSR.jpg CTA Compact Torque Actuator https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-1619.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1619 ]]>Compact Torque Actuator Hysteresis brake, electrically adjustable Hysteresis brake, electrically adjustable CTA is an electrically adjustable brake without the need of any external power supply for generating the braking force Features continuous adjustment of the braking force, electromotive adjusted brake torque remains even without external power supply cost-effective actuator for tension control durable, wearless and maintenance-free very smooth running and steady brake moment even at low rotational speeds compact design requires little space torque is independent of rotational speed in a wide range Applications tension controlled unwinding actuating element for tension control simulation of load torques Downloads CTA Compact Torque Actuator - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cta-compact-torque-actuator-p-1619.html Thu, 13 Jan 2022 16:24:17 +0000 USD 1619 1000 https://www.abqindustrial.net/store/images/CTA.jpg Hans-Schmidt TSCB-Series Compact Online Tension Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-tscb-series-compact-online-tension-sensor-p-2072.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2072 ]]>4 Tension Ranges from 0-100 g up to 0-1000 g 2 Roller Widths; 7 or 10 mm Diameters Compact housing design for Limited Access Space Universal Tension Sensor for Tapes, Bands and Tows (Glass and Carbon Fibers) 4 Tension Ranges from 0-100 g up to 0-1000 g 2 Roller Widths; 7 or 10 mm Diameters Can be supplied with V-Grooved or U-Grooved Rollers, TSC-Series The Hans-Schmidt TSCB-Series Compact Online Tension Sensor is a purpose-built online tension sensor for continuous measurement of running line tensions of narrow tapes, bands, webs, tows of fiberglass or carbon fibers and similar process materials. The precision-machined housing is constructed allowing for the installation of several sensors in close proximity to one another when the end-to-end spacing of the process material is limited. Multiple sensors can be mounted adjacent to another for fixed to a single rail for quick and easy mounting.. Built-in signal conditioning with ZERO and SPAN pots provide a high-level, analog output to minimize the chance for signal interference. Can be used for process diagnostics, for continuously monitoring and recording of online tensions. The TSCB Series Tension Sensor can also be used as part of a closed-loop control system with 3rd-Party controller. Mounting possibilities: Sensor can be mounted on a flat plate using the supplied thru holes on the underside of the housing body or fixed on the optional rail allowing for quick, easy installation and allows for multiple sensors mounted adjacent to one another with minimal spacing. Features Strain Gauge-based sensor provides accuracy of 2% Full Scale or better. Sensor can be mounted in any orientation depending upon the material path. Built-in Signal Conditioner provides 0-1 V DC Analog Output (0-10V or mv/V, optional) with Integrated Zero & Gain Pots on rear-side of sensor allowing for convenient calibration by the end-user for highest accuracy Supplied with easy-running ball-bearing mounted, flat cylindrical rollers with flanges. 7 mm wide roller is fabricated from nickel-plated steel, 10 mm roller is hardcoat anodized aluminum Rollers can be supplied with a special carbon-optimized coating ("orange peel"), Option Code CF Can be used together with SC-PM, PD765 Digital Tension Indicator or with user-supplied electronics (requires 15-24 V DC regulated power). 3-Roller design insures that the center sensor rollers has the same wrap angle at all times which allows the sensor to be mounted in any position on the line Sensor can be mounted on a flat plate using the supplied thru holes on the underside of the housing body or fixed on the optional rail allowing for quick, easy installation Slim Sensor Housing allows for multiple sensors mounted adjacent to one another with minimal spacing Includes 2 meter (6 ft) length integrated cable with open ends for connection to Tension Indicator or user-supplied electronics Specifications Accuracy ±2% full scale and ±1 digit Overload protection 100% of tension range Measuring principle Strain gauge bridge Measuring roller deflection max. 0.5 mm Signal processing analog Output signal Standard: 0-1 V DC (analog) Option: 0-10 V DC (Option "DC") or 2mV/V Direct Strain Gauge Output (Option "A10") Option "A10" Output 1 mV/V output, 5V DC power required (3-5V DC) Cable Shielded cable (2 m) with open ends Damping (fg) Standard (analog): 30 Hz Temperature drift better ± 0.05 % FS/ °C Temperature range 10 - 45 °C Air humidity 85 % RH, max. Power supply + 15 ... 24 V DC, 21 mA (regulated); Housing Aluminium, with threaded mounting holes on underside (M3 Thread) Housing dimensions 70 x 55 x 17 mm (L x W x H) Weight, net Approx. 100 g Connection to PD765 SIGNAL: Yellow (Sig+) to V+, Green (Sig-) to COM DC-POWER:White (Exc+) to P2+, Brown (Gnd) to P2- Ranges Model Range Measuring Head Width* Roller Width** TSCBB-100-7 0 - 100 g 70 mm 7 mm TSCBB-200-7 0 - 200 g 70 mm 7 mm TSCBB-500-7 0 - 500 g 70 mm 7 mm TSCBB-1000-7 0-1000 g 70 mm 7 mm TSCBB-100-10 0 - 100 g 70 mm 10 mm TSCBB-200-10 0 - 200 g 70 mm 10 mm TSCBB-500-10 0 - 500 g 70 mm 10 mm TSCBB-1000-10 0-1000 g 70 mm 10 mm cN units also available * Outside dimensions of the housing ** Outside dimensions of the roller Output Signal Standard 0 - 1 V DC (analog) Option Code DC: 0 - 10 V DC Option Code A10: Direct strain gauge output signal 2mV/V without amplifier Downloads TSCB-Series Compact Online Tension Sensor - Data Sheet TSCB-Series Compact Online Tension Sensor - Instruction Manual TSCB-Series Compact Online Tension Sensor - Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-tscb-series-compact-online-tension-sensor-p-2072.html Wed, 05 Apr 2023 23:23:30 +0000 USD 2072 Hans-Schmidt 1000 TSCB https://www.abqindustrial.net/store/images/tscb-series-compact-online-tension-sensor.jpg CLS Cantilever Load Sensor https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cls-cantilever-load-sensor-p-2117.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2117 ]]>Cantilever Load Sensor For precise measurement of web tension in a wide range of industrial applications including non-wovens, and films Measuring Ranges from 20N (2kg) up to 3kN (300kg) The CLS Cantilever Load Sensor is designed for precise measurement of web tension in a wide range of industrial applications including non-wovens, and films Related Products TS621 Strain Gauge Amplifier Provides an accurate tension display for all Check-Line sensors on a bright LED display RMA-CSW Cantilever Measuring Roll Ranges from 0 - 200 N to 0 - 1200 N CSW Narrow Web Tension Sensor Ranges from 0 - 5 N to 0 - 5000 N Downloads CLS Cantilever Load Sensor - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/cls-cantilever-load-sensor-p-2117.html Wed, 25 Oct 2023 20:53:59 +0000 USD 2117 1000 CLS https://www.abqindustrial.net/store/images/honigmann-cls-cantilever-load-sensor.jpg Hans-Schmidt FSR Tension Sensors, Online https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-fsr-tension-sensors-online-p-2119.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2119 ]]>Single Roller Tension Sensor Can be connected to SC-PM Tension Indicator Multiple output options including analog, USB, RS-232, RS-422 & Wi-Fi Fined-mounted tension sensor, single rollers system, for mounting at an existing location to create a fixed wrap angle of the material over the sensor rollers. 29.5mm diameter hardened steel v-grooved roller is standard. Optional rollers include a U-Grooved Roller with 5mm radius, 70mm diameter lightweight roller for optic fibers and similar fragile filaments as well as ribbon rollers for flat materials such as tapes/bands, tows, ribbon cable, rectangular wires and similar flat materials. 5 ranges are offered from 0-10N (1Kg) up to 0-200N (20 Kg), rated in resultant force (therefore wrap angle must be taken into account and resultant force calculated) Kit Contents Hans-Schmidt FSR Tension Sensors, Online Certificate of Compliance with the order 2.1 according EN 10204 free of charge Operating Instruction Transport Packaging Features Includes integrated amplifier with "zero" and "gain" adjustment pots Standard output is 0-1V DC Optional outputs include 0-10V DC, 4-20mA, USB, RS-232 and RS-422 Optional Wi-Fi cable free data transfer available requires use of battery pack for sensor Sensor can be mounted using holed in sensor body or front plate of sensor Features full bridge strain gauge sensing for highest accuracy Requires 15-24V DC regulated power for sensor excitation Optional Digital Tension Indicators are offered Specifications Calibration According to the factory calibration procedure Accuracy ±1.5 % full scale and ±1 digit % full scale or better other calibration material ±3 % full scale or better Overload Protection 100% of tension range Measuring principle Strain gauge bridge (Load Cell) Measuring roller deflection 0.5 mm, max Temperature drift Less than ±0.05 % full scale/ºC Output signal Standard: 0 – 1 V DC Option DC: 0 - 10V DC Option MA: 4-20mA Option USB: USB Output Option 232: RS-232 (200Hz) Option 422: RS-422 (200Hz) Option WL: Wi-Fi Output Damping Standard: 30 Hz (other values on request) Temperature Range 10 – 45 ºC Air Humidity 85 % RH, max. Power supply +15…24 V DC, max. 50 mA regulated Housing Material Aluminium Weight, net (gross) Approx. 250 g (Approx. 350 g) Ranges Model Resultant Force Capacity (g/Kg) Resultant Force Capacity (Newtons) FSR-10N 1000g / 1 Kg 0 – 10 N FSR-20N 2000g / 2 Kg 0 – 20 N FSR-50N 5Kg 0 – 50 N FSR-100N 10Kg 0 – 100 N FSR-200N 20 Kg 0 – 200 N FSR-500N 50 Kg 0 - 500N Determining the Tension Range The tension range can be calculated for every wrapping angle with this formula: When selecting the nominal measurement force it is necessary to take into account the weight of the guide roll and raise the nominal load respectively, particularly when working with small nominal forces Available Roller Types Roller Code Diameter / Width Max Line Speed (m/min) Roller Material Standard 29.5 mm (V-Groove) 4000 Hardened Steel R1 29.5 mm (U-Groove, R5) 4000 Hard Chrome-Plated Steel F 70 mm (V-Grooved) 4000 Hard-Coated aluminium FB 70 mm (V-Grooved) 4000 Tempered Steel B6 29.5 mm (6mm width) 2000 Hardened Steel, Ribbon Roller B10 29.5 mm (10mm width) 2000 Hardened Steel, Ribbon Roller Output Signal Possibilities Standard Output signal: 0 - 1 VDC Code A2 Output signal: 0 - 10 VDC Code A3 Output signal: 4 - 20 mA DC Code A10 Output signal: mV/V for sensors without amplifier Code 232 Output signal: -digital: RS 232 -analog: 0 - 1 V DC Up to 100 readings can be transferred per second, (internal sampling rate max. 4800 times/s) Code 232-H Output signal: -digital: RS 232 -analog: 0 - 1 V DC Only for tension range 200 Kg or higher Up to 500 readings can be transferred per second, (internal sampling rate max. 25000 times/s) Only for certain tension ranges and designs available Downloads Hans-Schmidt FSR Tension Sensors, Online - Data Sheet Hans-Schmidt FSR Tension Sensors, Online - Certificate Albuquerque Industrial https://www.abqindustrial.net/store/tension-meters-c-98/tension-sensors-online-c-98_44/hans-schmidt-fsr-tension-sensors-online-p-2119.html Wed, 25 Oct 2023 22:33:40 +0000 USD 2119 Hans-Schmidt 1000 FSR https://www.abqindustrial.net/store/images/hans-schmidt-fsr-online-tension-sensor.jpg