https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2026 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Mon, 08 Jun 2026 20:47:57 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mv-110-motorized-test-stand-p-207.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=207 Motorized Test Stand110lb CapacityMV-110 Motorized Test StandCapacity: 110lbs / 50Kg / 490N The Check-Line MV-110 test stand offers consistent and reliable testing. Combination of screw system and state of the art brushless motor provides extremely smooth and powerful operation over the entire speed range. The MV-110 accepts any of the standard range force gauges. Quick switch and Emergency Stop features are also included.*FORCE GAUGE NOT INCLUDEDDesigned to work with the DS2, Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) tests Optional digital distance meter Maximum clearance 9" (with extender 14") Screw feeder for smooth, positive movement No programming required Photo Gallery - click any photo to enlarge Dimensions Related Products LP-99Lexan Safety Shield Helps protect personnel from injury by containing debris during testing_DS2Digital Force Gauge Real time and peak mode (selectable) lb, kg, and Newton units are push-button selectable _NIST CAL Ordering Guide ModelSpeed RangeDistance MeterMV-1100.4 – 11.5 in/min(10 - 292 mm/min)NoMV-110-SS0.26 – 8.0 in/min(6.6 - 203 mm/min)NoMV-110-MS0.7 - 23.0 in/min(18 - 584 mm/min)NoMV-110-HS*1.5 - 47.0 in/min(38 - 1194 mm/min)NoMV-110S0.4 – 11.5 in/min(10 - 292 mm/min)YesMV-110S-SS0.26 – 8.0 in/min(6.6 - 203 mm/min)YesMV-110S-MS0.7 - 23.0 in/min(18 - 584 mm/min)YesMV-110S-HS*1.5 - 47.0 in/min(38 - 1194 mm/min)Yes*HS models have a limited capacity of 55lbs/25Kg/245N Specifications Capacity110lbs / 50Kg Travel RateRefer to Ordering Guide above DimensionsRefer to Dimensions above Compatible GaugesZ2, ZP and DS2 Warranty2 years Download Dimensional Drawing Click here to download PDF Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mv-110-motorized-test-stand-p-207.html Thu, 02 Nov 2023 21:36:59 +0000 USD 207 Imada 1000 MV-110 https://www.abqindustrial.net/store/images/products/force_gauges/MV-110/main_small.jpg 207 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-110-motorized-vertical-test-stand-p-208.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=208 Imada MX-110 Motorized Test Stand with FORCE CONTROLForce Gauge sold Separately110lb CapacityCapacity: 110lbs / 50Kg / 490N The new Imada MX-110 test stand offers consistent and reliable testing. The combination of a screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.Connect the Imada MX-110 test stand with a Z Series force gauge and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z Series force gauge, or maintain the force between the Z Series High and Low setpoints. Force control is ideal for fatigue or non-destructive testing.The MX-110 accepts any of the standard range force gauges. Quick switch and Emergency Stop features are also included.*FORCE GAUGE NOT INCLUDEDDesigned to work with the Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) testsForce Controlled operation with Z2 and ZP force gauges3 speed ranges: 0.4 – 11.5 in/min 0.7 - 23.0 in/min (MS)1.5 - 47.0 in/min (HS)Jog, Single Cycle, Continuous Cycle, Force ControlMaximum clearance 9" (with extender 14") Specifications Capacity110lbs / 50Kg Travel RateRefer to Ordering Guide above DimensionsRefer to Dimensions above Compatible GaugesZ2, ZP and DS2Warranty2 years Ranges ModelSpeed RangeDistance MeterMX-1100.4 – 11.5 in/min(10 - 292 mm/min)NoMX-110-MS0.7 - 23.0 in/min(18 - 584 mm/min)NoMX-110-HS1.5 - 47.0 in/min(38 - 1194 mm/min)NoMX-110S0.4 – 11.5 in/min(10 - 292 mm/min)YesMX-110S-MS0.7 - 23.0 in/min(18 - 584 mm/min)YesMX-110S-HS1.5 - 47.0 in/min(38 - 1194 mm/min)Yes Related Products ZPDigital Force Gauge with USB OutputUSB, RS-232C, and Analog outputs Click image for more info Z2Digital Force GaugeOutput signals (RS 232 C, analog and Mitutoyo Digimatic) Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-110-motorized-vertical-test-stand-p-208.html Tue, 02 Apr 2024 21:13:39 +0000 USD 208 Imada 998 MX-110 https://www.abqindustrial.net/store/images/products/imada-mx-110-motorized-vertical-test-stand.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-110-motorized-vertical-test-stand-2965.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-110-motorized-vertical-test-stand-5798.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-110-motorized-vertical-test-stand-5799.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-110-motorized-vertical-test-stand-5800.jpg 208 2 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-50pxh-l-motorized-horizontal-test-stand-p-217.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=217 Horizontal Motorized Test StandForce Gauge sold Separately110lb CapacityMotorized Horizontal Test Stand2 Models AvailableFGS-50PXH: 1.6" - 16" inches/min (Standard Speed)FGS-50PXL: .4" - 4" inches/min (Low Speed) Motorized horizontal teststand for single cycle or continous cycling capabilities. For use with FGE / FGV force gauges. *FORCE GAUGE NOT INCLUDEDDesigned to work with the FGE & FGV force gauges. Features User programmable set points: speed, distance, stop time Single cycle and continuous cycling capabilities High and low force set points user selectable through RS232C interface Compatibility with nearly all manufacturers’ gauges All gauge functions can be communicated through stand via RS232 interface Analog distance outputs Manually adjustable upper and lower limits All steel construction Specifications Capacity110 lbs / 50 kg / 500 N Stroke5.5" / 140 mm Fixed position (clearance):5 steps from 2.4" - 7.1" 1.2"/step(61 to 181 mm, 30 mm/step) Travel rateFGS-50PXH: 1.6" - 16" inches/minFGS-50PXL: .4" - 4" inches/min Travel distance:displayed with a resolution of 0.1 mm; output 10 mV/mm Power supply:115 AC, 60Hz (standard)230 V AC, 50 Hz(optional) Dimensions:17.6" x 9.2" x 8.1" (L x W x H) Weight42 lbs Compatible GaugesFGE / FGV Warranty1 year Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-50pxh-l-motorized-horizontal-test-stand-p-217.html Mon, 07 Oct 2024 19:05:42 +0000 USD 217 Shimpo 1000 FGS-50PXH / L https://www.abqindustrial.net/store/images/products/force_gauges/FGS-50PXH L/main_small.jpg 217 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm300-high-capacity-motorized-test-stand-p-218.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=218 Two-line LCD with UP, DOWN, STOP, and emergency stop buttons and soft keysMounting holes for bench mountingRemovable base plate with 25 #10-32 threaded holes for fixture mountingThe ESM300 Motorized Force Measurement Test Stand is a versatile and precise testing solution for most compression and tensile testing applications up to 300 lb. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.The ESM controller features an LCD display with dedicated UP, DOWN, STOP, and emergency stop buttons and soft keys as well as Selectable speed units (in/min & mm/min). An Emergency stop button is conveniently located for safe operation. Password lockout prevents unwanted changes to test stand configuration. Short push and release of buttons produce maintained crosshead motion until either of the buttons, or STOP button, is pushed.ESM300 Controller Features Two-line LCD with UP, DOWN, STOP, and emergency stop buttons and soft keysMounting holes for bench mountingRemovable base plate with 25 #10-32 threaded holes for fixture mountingModular design (test frame may be separated from controller and used remotely)Stepper motor-driven, produces 0% speed variation with increasing loadInternal steel stiffening plates significantly reduce column bendingSimplified low-maintenance drivetrainSelectable speed units of measurement (in/min and mm/min)Configurable password, for preventing unwanted changes to test parametersIntegrated travel limit switches Optional Controller Features Complete Options Package - $650.00Includes all the options listed belowAny of the below option packages may be purchased at time of order or may be added in the field at a later date. Features are field-enabled by entering an activation code. Read the ESM300 >>> user's guide for details on this unique capability. ESM300 test stands are shipped with all features enabled for a limited trial period.Auto-return PackageThe crosshead moves to one limit switch or force set point (applicable to Series BG gauges only), stops, and reverses direction to the other limit switch or set point.Cycling / Dwell Time PackageCycling mode allows the crosshead to move up and down between limit switches or force set points (Series BG gauges only). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 99,999 seconds, in 0.1 second intervals, for which the crosshead pauses between cycles. Requires limit switch kit.Button Operation PackageExpands button operation to three operational modes: Maintained (standard): a short push and release produces maintained motion, Momentary: crosshead moves only while the button is pressed, and Auto: short push and release produces maintained motion, while holding the button will produce crosshead movement, until released.Independent UP and DOWN speedsConfigurable speeds for up and down directionsExtended Speed Range Package - lowExtends the speed range to 0.02 - 13 in/minExtended Speed Range Package - highExtends the speed range to 0.5 - 45 in/min Complete Speed Range PackageExtends the speed range to 0.02 - 45 in/min Hardware Options Accessories A wide range of force gauges and gripping fixturesDigital travel display6" [152 mm] travel, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collectionOverload protection moduleProtects the force gauge against accidental overloads during motorized tests. Adjustable from 20 - 110% of gauge's capacity. Compatible with all Mark-10 force gauges with outputs.Set point cableStops test stand travel at programmable high and low set points for tension and compression forces, programmed on a compatible force gauge. Column extensionsAvailable in 6", 12", 24", and custom lengths PC Connection Guide Dimensions Related Products G104590° Peel TesterMaintains 90° angle between the table and the direction of pullMaximum table travel: 8.2 in (210 mm) BGDigital Force GaugeRS-232, Mitutoyo and analog outputsSelectable units of measurement Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm300-high-capacity-motorized-test-stand-p-218.html Fri, 01 Aug 2025 20:12:52 +0000 USD 218 Mark-10 1000 ESM300 https://www.abqindustrial.net/store/images/ESM300.jpg 218 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esmh-motorized-horizontal-test-stand-p-219.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=219 The ESMH has been replaced by the Mark-10 ESM303H Advanced Motorized Horizontal Test StandMotorized Test Stand with FORCE CONTROL Force Gauge sold Separately1100lb CapacityThe new ESMH is a 50 lb capacity horizontal test stand designed for tension, compression, and friction testing. A smooth top surface makes this tester particularly well suited for coefficient of friction testing. Other typical applications include the testing of sealed pouches, fabrics, tubing, sutures, and many other items in virtually every industry.The tester features integrated limit switches for repetitive testing or other tests where travel limits are required. Modular design accommodates a wide variety of test sample shapes and sizes. The ESMH uses a remote control unit, distancing the operator from the test for added safety and convenience. Use this test stand with a force gauge and grips to create a complete testing solution.*NOTE: Shown with optional equipment, force gauge and attachments sold separately. Features Mounting Holes for bench mountingRemovable loading plate with matrix of #10-32 threaded holes Specifications Capacity50 lbs / 25 Kg / 250 N Stroke13" [330 mm], 12" [305 mm] w/optional travel display Travel Rate0.2 - 50 in/min [5 - 1270 mm/min] Speed Accuracy±5% of setting, ±0% variation with load Limit Switch Repeatability±0.001" [0.03 mm] DimensionsRefer to Dimensions above Compatible GaugesBG and MGWarranty3 years Dimensions Related Products BGDigital Force GaugeRS-232, Mitutoyo and analog outputsSelectable units of measurement Click image for more info MGEconomical Digital Force Gauge - Push Pull GaugeUser-selected units of Pounds, Kilograms or Newtons3 Year Warranty Click image for more info Downloads ESMH Motorized Horizontal Test Stand - Data SheetESMH Motorized Horizontal Test Stand - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esmh-motorized-horizontal-test-stand-p-219.html Fri, 01 Aug 2025 20:12:49 +0000 USD 219 Mark-10 1000 ESMH https://www.abqindustrial.net/store/images/products/esmh.jpg 219 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm-motorized-force-test-stand-p-220.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=220 Motorized Test Stand Force Gauge sold Separately200lb Capacity Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm-motorized-force-test-stand-p-220.html Fri, 01 Aug 2025 20:12:53 +0000 USD 220 Mark-10 1000 ESM https://www.abqindustrial.net/store/images/products/ESM.jpg 220 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-275-motorized-vertical-test-stand-p-221.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=221 Imada MX-275 Motorized Vertical Test Stand Force Gauge sold Separately275lb CapacityCapacity: 275 lbs / 125 Kg / 1225 NThe Imada MX-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Connect the Imada MX-275 test stand with a Z2 or ZP Series force gauge and enable force controlled testing. High/Low Set Point Force ControlForce control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings. One Way Force ControlInitial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing. Speed control, quick switch and emergency stop are standard features. Optional timer and digital distance meter available. *FORCE GAUGE NOT INCLUDEDDesigned to work with the Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) testsJog, Single Cycle, Continuous Cycle (72 hour max.), Force ControlClearance 16"Force Controlled operation with ZP & Z2 Series force gaugesCombination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed rangeWide speed range: 0.4 – 9.4 in/min (optional speed ranges available)Optional timer and digital distance meter Specifications Capacity275 lbs / 125 Kg Travel Rate0.4 – 9.4 in/min DimensionsSee Dimensions above Compatible GaugesZP, Z2 and DS2Warranty2 years Related Products ZPDigital Force Gauge with USB OutputUSB, RS-232C, and Analog outputs Click image for more info Z2Digital Force GaugeOutput signals (RS 232 C, analog and Mitutoyo Digimatic) Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-275-motorized-vertical-test-stand-p-221.html Thu, 02 Nov 2023 21:25:17 +0000 USD 221 Imada 1000 MX-275 https://www.abqindustrial.net/store/images/products/imada-mx-275-motorized-vertical-test-stand.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-275-motorized-vertical-test-stand-2967.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-275-motorized-vertical-test-stand-2968.jpg 221 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-500-motorized-vertical-test-stand-p-226.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=226 The MX-500 has been replaced by the Imada MX2 High Performance Motorized Test StandMotorized Test Stand with FORCE CONTROL 500lb CapacityMX-500 Motorized Vertical Test StandMX-500 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings. Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing. Speed control, quick return and emergency stop are standard features. *FORCE GAUGE NOT INCLUDEDDesigned to work with the Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) tests Stroke: 13" Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control Maximum load 500 lb Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range. Wide speed range: 0.2 – 7 in/min (optional speed ranges available) Dimensions Related Products ZPDigital Force Gauge with USB Output Overload protection 200 % full scale_Z2Digital Force Gauge Output signals (RS 232 C, analog and Mitutoyo Digimatic)_SW-1Data Acquisition Software for Force Gauges & Torque Gauges Full SPC and graphing capabilities Automates your data collection Provides a running log of all measurements along with a chart of the data as well as statistical information_DB-1X - DB2-XData Input Button Send data to the PC spread sheet with the touch of a button Select different acquisition rates Zero the gauge _LP-99Lexan Safety Shield Helps protect personnel from injury by containing debris during testing_NIST CAL Specifications Capacity500 lbs Stroke13" Travel Rate0.2 – 7 in/min DimensionsSee Dimensions above Compatible GaugesDS2, Z2, ZP, ZPH and DPSH Warranty2 years Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-500-motorized-vertical-test-stand-p-226.html Mon, 07 Oct 2024 18:48:22 +0000 USD 226 Imada 1000 MX-500 https://www.abqindustrial.net/store/images/products/MX-500.jpg 226 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm301-programmable-test-stand-with-pc-control-p-748.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=748 THE ESM301 HAS BEEN REPLACED BY THE ESM303 (click here for additional information)Force measurement to 300 lb Force Gauge sold SeparatelyPC control, stop / cycle at force, travel, or limit switch11.5" of travelThe ESM301 is a highly configurable motorized test stand for tension and compression testing applications up to 300 lb (1.5 kN). The stand can be controlled from the front panel or via a computer. The ESM301 is engineered on a unique modular platform, allowing for "build-your-own" configurability. Features can be ordered individually at time of order or activated in the field. Integrated travel indication, overload protection, and a host of programmable parameters makes the ESM301 quite sophisticated, while its intuitive menu structure allows for quick, simple setup and operation. A password can be programmed to prevent unauthorized changes.With a rugged and modular design, the ESM301 is a compelling solution fir applications in laboratory and production environments. The ESM301 travel distance is 11.5", while the extended length ESM301L features travel distance of 18". All other specifications are the same. *The ESM301 is shown in a typical configuration with Series BG digital force gauge and film and paper grips Photo Gallery Features LCD display with UP, DOWN, STOP and emergency stop buttons and soft keysSelectable speed units of measurement (in/min & mm/min)Password protection of test parameters, to prevent unauthorized changesIntegrated travel limit switchesRemovable fixture mounting plate with matrix of threaded holesStepper motor-driven, produces 0% speed variation loadMounting holes for bench mountingUnique mechanical design significantly reduces column blending Hardware Options Accessories Multi-function cable, BG gauge to controllerConnects a Series BG force gauge to the controller. This single cable is used to transmit set points, overload signals, and force data. Serial cable, controller to PCSends force and travel data on a single cable via RS-232 to a PC. Bench mounting kitFacilitates safe mounting to a work bench. Consists of a set of mounting adapters, and four sets of hardware with Allen key to accommodate surfaces of various thickness. Column extensionsAvailable in 6", 12", 24", and custom lengths Optional Controller Features Computer ControlB A bi-directional RS-232 port is provided to interface with a PC. Users can write their own custom program or control the stand via a PC using NexygenTM TCD software. B A Series BG force gauge is required, along with 09-1056 serial cable and 09-1143 multi-function cable. ESM301-001 integrated travel indication is required for NexygenTM software, and recommended for interfacing with a custom programTravel IndicationTravel is indicated on the front panel, and an RS-232 port is supplied. Position indication is provided via an internal linear scale, producing significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated. Resolution is 0.001"Programmable Travel LimitsThe ESM301 can stop at or cycle between programmable upper and lower travel distances. Overload ProtectionProtects a force gauge against overload (requires the 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the ESM301 to interface with virtually any force gauge with analog output.Auto-returnThe crosshead moves to a limit switch, force (requires a Series BG force gauge), or travel position (requires EF017 programmable travel limits), stops, and reverses direction at full speed to the other limit switch, force, or travel position. Cycling / Dwell TimeSame as Auto-return, but with the ability to program the number of cycles up to 99,999 cycles. Dwell time allows the operator to program the length of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses between cycles. Independent up and down speeds may be programmed (requires EF013). Programmable Button FunctionsExpands UP and DOWN button operation to three user-configurable modes:Maintained (standard): short push produces continuous motion until STOP is pressed Momentary: crosshead moves only while the button is pressed Auto: short push produces maintained motion, while holding the button down will produce momentary motionIndependent Up and Down SpeedsConfigurable speeds for up and down directionsLow Speed Extended RangeExtends the speed range to 0.02 - 13 in/min (0.5 - 330 mm/min)High Speed Extended RangeExtends the speed range to 0.5 - 45 in/min (13 - 1100 mm/min) Specifications CapacityUp to 24 in/mm: 300 lbF / 1.5 kN> 24 in/mm: 200 lbF / 1 kN Standard Speed Range13 - 330 mm/min (0.6 - 13 in/min) Maximum TravelESM301 11.5 in (292 mm)ESM301L 18 in (457 mm) Speed Setting Accuracy±0.2% Speed Variation with load±0% (Stepper motor driven) Limit switch repeatability0.001 in (0.03 mm) PowerUniversal input 80-240 VAC, 50/60 Hz Weight (without options)14.5 kg (32 lbs) Included accessoriesExt. rod, small hook, medium hook, #10-32 coupler, compression plate, gauge mounting hardware, tool kit *NoteOptional Distance Meter Max Sampling Rate Output - 3 Samples Per Second Related Products Series-5Advanced Digital Force Gauge - Model M5High-speed 7,000 Hz peak sampling rateUSB, RS-232, Mitutoyo, and analog outputs Click image for more info Downloads ESM301 Programmable Test Stand with PC Control - Instruction ManualESM301 Programmable Test Stand with PC Control - Data Sheet Attention * If force data output is required, both the 09-1143 and 09-1056 cables are required. ** Factory installation only Can be retrofitted at a later date at the factory for $850.00 / $1,050.00 (ESM301 / ESM301L). *** Requires a Series BG force gauge (more info), 09-1056 serial cable, 09-1143 multi-function cable, ESM301-001 integrated travel indication, and EF011 programmable travel set points **** Requires ESM301-001 integrated travel indication option The ESM301 is supplied with a small hook, medium hook, 2" diameter compression plate, extension rod, and #10-32 coupler. Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm301-programmable-test-stand-with-pc-control-p-748.html Fri, 01 Aug 2025 20:12:50 +0000 USD 748 Mark-10 1000 ESM301 https://www.abqindustrial.net/store/images/ESM301.jpg 748 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esmh-dc-advanced-motorized-test-stand-p-749.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=749 Advanced Motorized Horizontal Test Stand 50lb CapacityManufacturer: Mark-10Warranty: One YearThe ESMH-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the ESM motorized test stand, including 50 lb (250 N) force capacity, smooth top surface for coefficient of friction testing, integrated limit switches, stepper motor design that prevents speed variation with load, and more. The ESMH-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features. Features Computer Control An RS-232 port is provided to interface with a PC. The ESMH-DC accepts a number of commands pertaining to test stand motion and force gauge functions*. The following additional items are required for PC control:Series BG force gauge (more info) 09-1056 serial cable (see Optional Equipment) 09-1143 multi-function cable (see Optional Equipment) Overload ProtectionProtects a force gauge against overload (requires a Series BG force gauge and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virtually any force gauge with analog output. Auto-return The crosshead moves to a limit switch or force set point (requires a Series BG force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point. Cycling / Dwell TimeThe crosshead moves up and down between limit switches or force set points (requires a Series BG force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits. Programmable LEFT / RIGHT Button FunctionsLEFT and RIGHT button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed, Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion. Independent Left and Right Speeds Programmable independent speeds for left and right directions Selectable speed units of measurement (in/min & mm/min)Password protection Prevents unauthorized changes to test parametersContains no integrated travel measurement. Travel information available only through the external ESMH001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301. Specifications Capacity50 lbs / 25 Kg / 250 N Stroke13" [330 mm], 12" [305 mm] w/optional travel display Travel Rate0.2 - 50 in/min [5 - 1270 mm/min] Speed Accuracy±2% of setting, ±0% variation with load Limit Switch Repeatability±0.001" [0.03 mm] DimensionsRefer to Dimensions above Compatible GaugesBG and MG Warranty3 years Dimensions Related Products BGDigital Force GaugeRS-232, Mitutoyo and analog outputsSelectable units of measurement Click image for more info MGEconomical Digital Force Gauge - Push Pull GaugeUser-selected units of Pounds, Kilograms or Newtons3 Year Warranty Click image for more info Downloads ESMH-DC Advanced Motorized Test Stand - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esmh-dc-advanced-motorized-test-stand-p-749.html Fri, 01 Aug 2025 20:12:49 +0000 USD 749 Mark-10 996 ESMH-DC https://www.abqindustrial.net/store/images/ESMH-DC.jpg 749 4 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100pv-motorized-test-stand-p-750.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=750 Force Gauge sold Separately110lb Capacity4 Models: Shimpo FGS-100PVH (vertical - standard) - 110 lb CapacityShimpo FGS-100PVL (vertical - low speed) - 110 lb Capacity Shimpo FGS-100PVH-230V (vertical - low speed) - 110 lb Capacity, 230V ACShimpo FGS-100PVL-230V (vertical - low speed) - 110 lb Capacity, 230V ACThis advanced motorized test stand allow the user to obtain the most accurate, repeatable results available in the market today. The all steel construction makes the Shimpo FGS-100PVH remarkably rugged, while programming and cycling capabilities enable it to be highly intelligent. All stands have the ability to interface with our top quality force gauges, providing complete force measurement systems for the most precise testing applications. Because speed, distance, and time are controlled by the user in either a vertical or horizontal model, our motorized stands can be configured for any application. One year warranty. *Formally FGS-50PVH / FGS-50PVL  Features User programmable set points: speed, distance, stop timeHigh and low force set points user selectable through RS232C interface or directly through DFS gaugeGauge overload protectionAnalog distance outputsSingle cycle and continuous cycling capabilitiesCompatibility with nearly all manufacturers’ gaugesAll gauge functions can be communicated through stand via RS232 interfaceManually adjustable upper and lower limits Dimensions Specifications Capacity110 lb (50 kg) Stroke5.5" (140 mm) Vertical Clearance2.4"- 7.1" (61-181 mm)5 steps, 1.18"/step (30 mm/step) Travel100PVH:Adjustable: 1.57-15.74"/min(40-400 mm/min)100PVL:Adjustable: 0.39-3.93"/min(10-100 mm/min) DisplayFour digit LED, 0.41" high (10.5 mm).Reads in inches (0.01 resolution) or millimeters (0.1 resolution) Power120 VAC, 60 Hz Weight42 lb (19 kg)  Related Products FGE - FGVHand-held Digital Force GaugeIncludes Traceable Calibration CertificateAccuracy ± 0.2%User-selected units of Pounds, Kilograms or Newtons Click image for more info FGV-XYDigital Force Gauge with USB OutputAccuracy of ±0.2%providing superb repeatabilityUSB, RS-232 & Analog Outputs-- all included!3 different outputs for data transfer provides maximum flexibility Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100pv-motorized-test-stand-p-750.html Mon, 07 Oct 2024 19:04:35 +0000 USD 750 Shimpo 1000 FGS-100PVH https://www.abqindustrial.net/store/images/FGS-100PVH.jpg 750 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-1100-motorized-vertical-test-stand-p-752.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=752 The Imada MX-1100 Motorized Vertical Test Stand has been replaced by the Imada MX2 High Performance Motorized Test StandForce Gauge sold Separately1100lb CapacityCapacity: 1100lbs / 500Kg / 5000N The Imada MX-1100 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Connect the Imada MX-1100 test stand with a Z Series force gauge and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z Series force gauge, or maintain the force between the Z Series High and Low setpoints. Force control is ideal for fatigue or non-destructive testing. High/Low Set Point Force ControlForce control is activated when the applied force is at or between the high and low set point(s) of the force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings. One Way Force ControlInitial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing. Speed control, The MX-1100 accepts any of the standard range force gauges. Quick switch and Emergency Stop features are also included. *FORCE GAUGE NOT INCLUDEDDesigned to work with the Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) testsCombination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.Conditional Overload PreventionStroke: 13"Jog, Single Cycle, Continuous Cycle, Force ControlWide speed range: 0.4 –11.8 in/min (optional speed ranges available)Optional timer and digital distance meterForce Controlled operation with Z2 and ZP force gauges Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx-1100-motorized-vertical-test-stand-p-752.html Tue, 17 Feb 2026 19:05:56 +0000 USD 752 Imada 1000 MX-1100 https://www.abqindustrial.net/store/images/MX-1100.jpg https://www.abqindustrial.net/store/images/additional/imada-mx-1100-motorized-vertical-test-stands-2973.jpg 752 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm-dc-advanced-motorized-test-stand-p-753.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=753 Mark-10 TSFM-DC Advanced Motorized Test StandForce Gauge sold Separately500lb CapacityThe Mark-10 TSFM-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the TSFM motorized test stand, including 500 lb (2200 N) force capacity, generous clearance and throat depth, rugged design, and more, stepper motor design that prevents speed variation with load, and more. The Mark-10 TSFM-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features. Kit Contents Mark-10 TSFM-DC Advanced Motorized Torque Test StandDC controllerController connection cableIndicator mounting kitEncoder cableColumn cap with hardwareAllen wrench setThumb screw for mounting indicatorPower cord Click image to enlarge Features Digital Angle Indication; Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.Programmable Angle Limits; The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.Overload Protection; Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.Auto-return; The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.Cycling / Dwell Time; Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.Programmable Button Functions; Programmable CW and CCW button functions - momentary motion, maintained motion, or auto.Independent CW and CCW Speeds; Configurable speeds for CW and CCW directionsSelectable speed units of measurement (RPM and °/s)Password protection; Prevents unauthorized changes to controller settings.Computer Control; An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC Specifications Maximum LoadStandard: 100 lbFin [11.5 Nm]Optional: 200 lbFin [22.0 Nm]Speed RangeStandard: 0.01 - 15 RPM [0.05 - 90°/s]Optional: 0.04 - 60 RPM [0.2 - 360°/s] *Speed Accuracy+/-0.2% of setting, +/-0% variation with loadRotational travel accuracy+/-0.7° / 0.02 rev.Rotational travel repeatability0.1° / 0.01 rev.Rotational travel resolution0.1° / 0.01 rev.Throat4.10" [104 mm]Manual adjustment12° / adjustment knob revMaximum slider travel15.5" [394 mm]Slider travel rate1.047" [26.6 mm] / lever revUniversal power supply80-250 VACOperating Temperature Range40 - 100°F, max. 96% humidity, non-condensatingCertificationsCEWarranty3-Years*Maximum torque decreases proportionately with speed. Examples:- Maximum torque at 60 RPM = 25 lbFin [2.8 Nm]- Maximum torque at 30 RPM = 50 lbFin [5.6 Nm] Downloads TSFM-DC Advanced High Capactiy Motorized Test Stand -Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm-dc-advanced-motorized-test-stand-p-753.html Fri, 01 Aug 2025 20:12:48 +0000 USD 753 Mark-10 1000 TSFM-DC https://www.abqindustrial.net/store/images/TSFM-DC.jpg 753 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100pxh-motorized-horizontal-test-stand-p-777.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=777 This product has been discontinuedShimpo FGS-100PXH Motorized Horizontal Test Stand Force Gauge sold Separately100lb Capacity2 Models AvailableFGS-100PXH: 1.6" - 16" inches/min (Standard Speed)FGS-100PXL: .4" - 4" inches/min (Low Speed) Motorized horizontal test stand for single cycle or continuous cycling capabilities. For use with FGE / FGV force gauges. *FORCE GAUGE NOT INCLUDEDDesigned to work with the FGE & FGV force gauges.  Features User programmable set points: speed, distance, stop timeSingle cycle and continuous cycling capabilitiesHigh and low force set points user selectable through RS232C interfaceCompatibility with nearly all manufacturers’ gaugesAll gauge functions can be communicated through stand via RS232 interfaceAnalog distance outputsManually adjustable upper and lower limitsAll steel construction Specifications Capacity110 lbs / 50 kg / 500 N Stroke5.5" / 140 mm Fixed position (clearance)5 steps from 2.4" - 7.1" 1.2"/step(61 to 181 mm, 30 mm/step) Travel rateFGS-50PXH: 1.6" - 16" inches/minFGS-50PXL: .4" - 4" inches/min Travel distancedisplayed with a resolution of 0.1 mm; output 10 mV/mm Power supply115 AC, 60Hz (standard)230 V AC, 50 Hz(optional) Dimensions17.6" x 9.2" x 8.1" (L x W x H) Weight42 lbs Compatible GaugesFGE / FGV Warranty1 year  Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100pxh-motorized-horizontal-test-stand-p-777.html Mon, 07 Oct 2024 19:05:22 +0000 USD 777 Shimpo 1000 FGS-100PXH https://www.abqindustrial.net/store/images/products/FGS-100PXH.jpg 777 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx2-high-performance-motorized-test-stand-p-902.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=902 Imada MX2 High Performance Motorized Test StandForce Gauge sold Separately110lb up to 1100lb Capacity4 Capacities Available:Imada MX2-110 — 110 lbs / 50 Kg / 500 NImada MX2-275 — 275 lbs / 125 Kg / 1250 NImada MX2-550 — 550 lbs / 250 Kg / 2500 NImada MX2-1100 — 1100 lbs / 500 Kg / 5000 NHigh Performance, Force Control, Motorized Test Stand with Speed Control, Timer & Cycle CounterImada MX2 High Performance Motorized Test Stand use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.Precise Increment ModeImada MX2 High Performance Motorized Test Stand features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .015mm for MX2-110, .01mm for MX2-275 and .05mm for MX2-550, 0.002 for MX2-1100 (standard speed, under no load).Cycle ModeMX2 Program dial and LCD interface In cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Control start and return speeds independently.Force ControlForce controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the MX2 test stand to enable the following force controlled tests and Conditional Overload Prevention.Maintain Force Between High/Low SetpointsInitial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.Increase Force to High Setpoint and StopInitial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached Features Ultra rigid, .5mm deflection at maximum loadWide speed range: 0.4 — 11.8 in/min (optional speed ranges available)Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectableForce Controlled operation with Imada Z Series force gaugesEasy-to-use program dial and menu screens control mode, speed, timer and cyclesOptional digital distance meter availableProgrammable timer up to 99' 59.9 sec in 0.1 sec incrementsConditional Overload PreventionOne stand for both compression (push) and tension (pull) testsMax clearance 9" (with extender 14") Specifications Travel RateRefer to Speed Range Table aboveDimensionsSee Download SectionCompatible GaugesImada ZTA Series Digital force Gauge and Imada DST Digital force Gauge Ranges ModelCapacityDistance MeterStrokeJog Mode Minimum — Movement DistanceMX2-110110 lbfNone9.4" (240mm)~.015mmMX2-110-S110 lbfStandard9.4" (240mm)~.015mmMX2-275275 lbfNone12.2" (300mm)~.01mmMX2-275-S275 lbfStandard12.2" (300mm)~.01mmMX2-550550 lbfNone12.2" (300mm)~.05mmMX2-550-S550 lbfStandard12.2" (300mm)~.05mmMX2-11001100 lbfNone12.2" (300mm)~.05mmMX2-1100-S1100 lbfStandard12.2" (300mm)~.05mm*Note: Optional Distance Meter Max Sampling Rate Output — 2 Samples Per Second Speed Ranges ModelSpeed RangeMX2-1100.4 — 11.8 in/min (10 — 300 mm/min)MX2-110-V6000.8 — 23.5 in/min (20 — 600 mm/min)MX2-110-V900.1 - 3.5 in/min (3 — 90 mm/min)MX2-2750.4 — 11.8 in/min (10 — 300 mm/min)MX2-275-V6000.8 — 23.5 in/min (20 — 600 mm/min)MX2-275-V750.1 — 2.9 in/min (3 — 75 mm/min)MX2-5500.4 — 12 in/min (10 — 305 mm/min)MX2-550-V750.1 — 3.5 in/min (3 — 75 mm/min)MX2-11000.02 — 12 in/min (0.5 — 300 mm/min) Related Products Imada ZTA Series Digital force GaugeImada ZTA-Series Digital Force Gauge Adds Displacement Output with Compatible Stands and Data output Direct to Flash drive. Easy-to-use menus make programming simple in eight languages. Select units, reverse display, set high/low setpoints, and all other functions in plain language. Click image for more info Imada DST Digital force GaugeThe Imada DST Digital Force Gauge are simple-to-use basic gauges featuring user-friendly menu operation. Selections including unit and measuring mode can be locked to prevent accidental changes. The large backlit LCD display can be configured in basic format to show value. Click image for more info Downloads Imada MX2 High Performance Motorized Test Stand — Data SheetImada MX2 High Performance Motorized Test Stand — Instruction ManualImada MX2 High Performance Motorized Test Stand —Dimensions Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mx2-high-performance-motorized-test-stand-p-902.html Sat, 07 Mar 2026 16:16:21 +0000 USD 902 Imada 999 MX2 https://www.abqindustrial.net/store/images/imada-mx2-high-performance-motorized-test-stand.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5788.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5789.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5790.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5791.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5792.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5793.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-7480.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-7481.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-7482.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5794.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5795.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5796.jpg https://www.abqindustrial.net/store/images/additional/imada-mx2-high-performance-motorized-test-stand-5797.jpg 902 1 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-p-904.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=904 This product has been discontinuedMark-10 TSFM500-DC Advanced Motorized Test Stand 500lbForce Gauge sold SeparatelyPC control, stop / cycle at force, travel, or limit switchThe Mark-10 TSFM500-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the TSFM500 motorized test stand, including 500 lb (2200 N) force capacity, generous clearance and throat depth, rugged design, and more, stepper motor design that prevents speed variation with load, and more. The TSFM500-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features. Horizontal Model, TSFM500H-DC Photo Gallery Features Computer ControlAn RS-232 port is provided to interface with a PC. The ESMH-DC accepts a number of commands pertaining to test stand motion and force gauge functions*. The following additional items are required for PC control:Series BG force gauge09-1056 serial cable (see Optional Equipment)09-1143 multi-function cable (see Optional Equipment)Overload Protection Protects a force gauge against overload (requires a Series BG force gauge and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virtually any force gauge with analog output.Auto-returnThe crosshead moves to a limit switch or force set point (requires a Series BG force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point.Cycling / Dwell TimeThe crosshead moves up and down between limit switches or force set points (requires a Series BG force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.Programmable LEFT / RIGHT Button FunctionsLEFT and RIGHT button operation can be configured in three user-configurable modes:Maintained: a short push produces continuous motion until STOP is pressed,Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion.Independent Left and Right SpeedsProgrammable independent speeds for left and right directionsSelectable speed units of measurement (in/min & mm/min)Password protection Prevents unauthorized changes to test parametersContains no integrated travel measurement. Travel information available only through the external ESMH001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301. Related Products Series-5Advanced Digital Force Gauge - Model M5High-speed 7,000 Hz peak sampling rateUSB, RS-232, Mitutoyo, and analog outputs Click image for more info Downloads TSFM500-DC 500lb Capacity Advanced Motorized Test Stand - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-p-904.html Fri, 01 Aug 2025 20:12:48 +0000 USD 904 Mark-10 1000 TSFM500-DC https://www.abqindustrial.net/store/images/TSFM500-DC.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-782.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-783.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-784.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-785.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-786.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-787.jpg https://www.abqindustrial.net/store/images/additional/tsfm500-dc-500lb-capacity-advanced-motorized-test-stand-788.jpg 904 The TSFM500-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features.

]]> 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100e-motorized-force-test-stand-p-906.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=906 Shimpo FGS-100E Motorized Force Test StandForce Gauge sold Separately110 lbs capacityThe Shimpo FGS-100E Vertical, Motorized Force Test Stands combined with our superior quality force gauges, create a complete force measurement system capable of handling the most precise testing applications.The test stand’s all steel construction makes them remarkably rugged while performing with precision, providing the reliability to tackle a multitude of applications.The Shimpo FGS-100E’s possess simplified operation with their 7 button key-pad and emergency stop button, eliminating lengthy training typical of similar test stands. With four modes of operation (manual, jog, single cycle, continuous) various single tests or repetitive tests can be achieved and selected with the push of a button. The user can quickly change the speed units displayed on the LCD from mm/min to inches/min to satisfy their test requirement or preference. With manually adjustable high and low stop limits, the test stands are designed for minimal time necessary to adjust for the next test. The FGS-100E motorized stands have a capacity rating of 110 lbs (50 kgf) in either fast [0.78-23.60 in/min (20-600 mm/min)] movement operation or slow speed [0.23-7.00 in/min (6-180 mm/min)] operation models.When connected to a FGV Force Gauge, the gauges programmable overload setting is communicated to the test stand, allowing the stand to stop at the overload set point and prevent potential damage to the gauge’s sensor. Features Simplified 7 button key-pad with emergency safety stop provides a user-friendly platform that does not require extensive trainingCompatibility with nearly all manufactures' force gauges enables flexibility in testing applicationsField selectable inches/min or mm/min allows user preference or to change as needed per test requirementLarge 100-230 VAC power capability provides flexible installation; eliminates power transformerQuick-adjust manual upper and lower limits eliminates set-up time for the next testCompact, modular design reduces weight, footprint and cost of stand Specifications Capacity112.4 lbf (500N, 50kgf)Movement SpeedFGS-100E-L: 6-180 mm/min (0.23-7.00in/min)FGS-100E-H: 20-600 mm/min (0.78-23.60in/min)Speed Accuracy± 5%Stroke15.75 in (400 mm)DisplayLCD 3 Digits indicates movement speed, Operation ModeOperation ModeManual (MAU), Jogging (JOG), 1 Cycle (SIG), Continuous (CON)InputOver Load Input Stops by FGV Over Load SignalDimensionsProduct: 3.66 x 5.91 in (93 x 150 mm); Table: 3.66 x 5.91 in (93 x 150 mm)Temperature Range32 - 113°F (0 - 45°C) No CondensationPower SupplyAC100 - 230V ± 10%WeightApprox. 40.1 lbs (20 kg) Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-100e-motorized-force-test-stand-p-906.html Mon, 26 Jun 2023 20:32:53 +0000 USD 906 Shimpo 999 FGS-100E https://www.abqindustrial.net/store/images/FGS-100E.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-100e-motorized-force-test-stand-2975.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-100e-motorized-force-test-stand-2976.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-100e-motorized-force-test-stand-2977.jpg 906 1 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh-275-motorized-horizontal-test-stand-p-907.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=907 Imada MH-275 Motorized Horizontal Test StandForce Gauge sold Separately275lb CapacityCapacity: 275 lbs / 125 Kg / 1225 NThe Imada MX-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Connect the Imada MX-275 test stand with a Z2 or ZP Series force gauge and enable force controlled testing. High/Low Set Point Force ControlForce control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings. One Way Force ControlInitial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing. Speed control, quick switch and emergency stop are standard features. Optional timer and digital distance meter available. *FORCE GAUGE NOT INCLUDEDDesigned to work with the Z2 & ZP force gauges. Features One stand for both compression (push) and tension (pull) testsJog, Single Cycle, Continuous Cycle (72 hour max.), Force ControlClearance 16"Force Controlled operation with ZP & Z2 Series force gaugesCombination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed rangeWide speed range: 0.4 – 9.4 in/min (optional speed ranges available)Optional timer and digital distance meter Specifications Capacity275 lbs / 125 Kg Travel Rate0.4 – 9.4 in/min DimensionsSee Dimensions above Compatible GaugesZP, Z2 and DS2Warranty2 years Dimensions Related Products ZPDigital Force Gauge with USB OutputOverload protection 200 % full scale Click image for more info Z2Digital Force GaugeOutput signals (RS 232 C, analog and Mitutoyo Digimatic) Click image for more info SW-1Data Acquisition Software for Force Gauges & Torque GaugesFull SPC and graphing capabilitiesAutomates your data collectionProvides a running log of all measurements along with a chart of the data as well as statistical information Click image for more info LP-99Lexan Safety ShieldHelps protect personnel from injury by containing debris during testing Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh-275-motorized-horizontal-test-stand-p-907.html Thu, 02 Nov 2023 21:26:04 +0000 USD 907 Imada 1000 MH-275 https://www.abqindustrial.net/store/images/MH-275.jpg https://www.abqindustrial.net/store/images/additional/imada-mh-275-motorized-horizontal-test-stand-2969.jpg https://www.abqindustrial.net/store/images/additional/imada-mh-275-motorized-horizontal-test-stand-2971.jpg https://www.abqindustrial.net/store/images/additional/imada-mh-275-motorized-horizontal-test-stand-2972.jpg 907 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-emx-275-ultra-precision-force-control-motorized-test-stand-p-909.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=909 Imada EMX Ultra Precision, Force Control, Motorized Test StandForce Gauge sold SeparatelyEasy-to-use program dial and menu screens control distance, mode, speed, time and cyclesForce Control Testing with Imada ZTA Force GaugesBreak Detection (detects breakage automatically)Stop at Preset Force ValueStop at Desired Displacement from Contact PointStop at Desired Displacement from Start PositionMaintain Force between High/Low SetpointsThe Imada EMX Motorized Force Measurement Test Stand is for users requiring the utmost precision in their force testing. The Imada EMX uses a precision stepper motor that provides precise movement and smooth operation. Rigid construction assures minimum deflection to ensure consistent force and distance test results. The test stand incorporates an easy to read LCD screen onto the base. Use the intuitive program dial to set the mode, speed, test duration time, number of cycles and change other available test settings. The EMX allows users to save up to 5 test configurations into the stand.Three Modes of OperationThe Imada EMX motorized test stand includes three modes of operation: Increment, Manual, Cycle Modes. The EMX features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .01mm. Manual mode allows the user to control the crosshead using the arrow buttons. In cycle mode, automated cycle tests are easy to setup.Control start, measuring and return speeds independently.Force and Distance ControlForce controlled non-destructive tests are also easy to setup and program. Connect an Imada ZT Series force gauge to the Imada EMX test stand to enable the use of two force controlled modes and Conditional Overload Prevention. For more information, see the force control operation tab below.The Imada EMX has been updated and now allows for Distance Control utilizing the new contact detection feature. This is ideal for for spring tests, elongation tests or any tests requiring a sample to be put under tension or compression to a specified distance.Maintain Force Between High/Low SetpointsInitial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the ZT series force gauge. The cross head maintains force between the low and high setpoint for the specified hold time,and then returns to the start position.Increase Force to High Setpoint and StopInitial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the ZT series force gauge, the test stand engages the measuring speed setting. The gauge stops when the applied force reaches the high set point on the ZT series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached. Features Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with ZTA force gauges) selectableUnique increment test mode. Each click of the program dial moves the cross head exactly 0.01mm (under no load)Programmable test distance (i.e. compress a certain distance)Up to five test configurations saved in memoryUltra rigid construction, 0.25mm deflection at max loadBoth compression and tension testsProgrammable timer up to 99'59.9, in 0.1 sec incrementsEasy-to-use program dial and menu screens control distance, mode, speed, time and cyclesWide speed range: 0.01 – 23.5 in/min (0.5 – 600mm/min)Force Controlled operation with Imada ZTA gaugesConditional Overload PreventionStroke: EMX-110 11.6 (295mm) EMX-275 12.6"(320mm)Optional extender adds 5"of clearanceOptional standard or high performance digital distance meter available Specifications Standard Distance MeterDisplayPush button for inch/mm, zero set and on/offResolution0.0005"/0.01 mmAccuracy0.1% of reading or 0.005"/0.1 mm whichever is greaterHigh Speed Distance MeterRange280.00 mm - 11.00"Resolution0.01 mm - 0.0001"Accuracy0.1 mm - 0.004" Ranges ModelCapacityDistance MeterStrokeSpeed RangeEMX-110110 lbfNone295 mm (11.6").5 - 600 mm/min (.01 - 23.5 in/min)EMX-110-S110 lbfStandard295 mm (11.6").5 - 600 mm/min (.01 - 23.5 in/min)EMX-110-FA110 lbfHigh Speed295 mm (11.6").5 - 600 mm/min (.01 - 23.5 in/min)EMX-275275 lbfNone320 mm (12.6").5 - 600 mm/min (.01 - 23.5 in/min)EMX-275-S275 lbfStandard320 mm (12.6").5 - 600 mm/min (.01 - 23.5 in/min)EMX-275-FA275 lbfHigh Speed320 mm (12.6").5 - 600 mm/min (.01 - 23.5 in/min) Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-emx-275-ultra-precision-force-control-motorized-test-stand-p-909.html Mon, 09 Jun 2025 18:13:58 +0000 USD 909 Imada 1000 EMX https://www.abqindustrial.net/store/images/EMX-275.jpg https://www.abqindustrial.net/store/images/additional/imada-emx-275-ultra-precision%2C-force-control%2C-motorized-test-stand-2974.jpg 909 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm750-esm1500-high-capacity-motorized-test-stand-p-984.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=984 Mark-10 ESM750 / ESM1500 High Capacity Motorized Test StandForce Gauge sold SeparatelyPC control, stop / cycle at force, travel, or limit switch32" of travelThe Mark-10 ESM750 High Capacity Motorized Test Stand is a highly configurable single-column force tester for tension and compression measurement applications up to 750 lb (3.4 kN). The Mark-10 ESM1500 High Capacity Motorized Test Stand is a highly configurable single-column force tester for tension and compression measurement applications up to 1,500 lbF (6.7 kN). Suitable for laboratory and production environments, the Mark-10 ESM750 / ESM1500 may be used with an indicator-load cell combination or with a force gauge. Sample setup and fine positioning are a breeze with available FollowMeTM force-based positioning - using your hand as your guide, push and pull on the load cell or force gauge to move the crosshead at a dynamically variable rate of speed. With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions, all protected by a password.Controller functions are offered individually through a unique “build-your-own” configuration platform. Order any combination of functions to customize the test stand to specific requirements. Functions not ordered originally can be activated in the field.Force and travel data can be output to a PC for graphing and analysis using MESURTMgauge software. Or, fully control the stand by a PC through a custom-written program in any language supporting ASCII communications. Kit Contents Features Broad force range and clearance dimensionsCompatible with load cells and force gaugesUSB output of force vs. time or force vs. distanceAdjustable, removable control panel with intuitive menu navigationUnique modular function platform – select functions as required for the applicationPassword protection of test parametersStepper motor-driven, producing smooth and quiet operation with no speed variation under loadCompact footprint, suitable for crowded workbenchesMost electronics are housed in an integrated removeable enclosure, easily accessed for service Specifications ESM 1500ESM 1500SESM 750ESM 750SLoad capacity1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min750 lbF [3.4 kN] at < 35 in [900 mm]/min500 lbF [2.3 kN] at > 35 in [900 mm]/minMaximum travel distance32.0 in [813 mm]14.2 in [360 mm]32.0 in [813 mm]14.2 in [360 mm]Standard speed range0.5 – 24 in/min [10 – 600 mm/min]Available speed range0.001 – 90 in/min [0.02 – 2,300 mm/min]0.001 – 60 in/min [0.02 – 1,525 mm/min]Speed setting accuracy±0.2% of settingSpeed variation with load±0% [stepper motor driven]Travel accuracy*±0.002 in. per 10 in. [±0.05 mm per 250 mm]Travel resolution0.001 in [0.02 mm]Limit switch repeatability±0.001 in [0.03 mm]PowerUniversal input 80-240 VAC,50/60 Hz, 450WUniversal input 80-240 VAC,50/60 Hz, 120 WWeight198 lb [90 kg]160 lb [72 kg]185 lb [84 kg]150 lb [68 kg]Shipping weight248 lb [113 kg]206 lb [93 kg]236 lb [107 kg]196 lb [88 kg]Warranty3 years [see individual statement for further details]ConformanceCE markBecause load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance. Optional Functions FeatureDescriptionRequirementsFollowMe®force-based positioningSF008Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.Series 7 or 5 gauge or indicatorTravel indicationSF009(ESM1500 / ESM750)SF009-1(ESM1500S / ESM750S)Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.For data output to a PC, a Series 7 or 5 gauge or indicator is required.Computer controlSF010Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).This option is not required for MESUR®gauge Plus software.Series 7 or 5 gauge or indicatorSF009 travel indicationFor full speed range, consider SF017 and SF018 speed range extensionsProgrammable travel limitsSF011The stand stops at or cycles between programmable upper and lower travel distances.SF009 travel indication optionOverload protectionSF012Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges.Series 7 or 5 gauge or indicatorAuto returnSF013The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.Reversing at force set point: Series 7 or 5 gauge or indicatorReversing at travel limit: SF011 programmable travel limits optionReversing at break: SF019 break detection optionCycling / dwell timeSF014Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds.Same as auto-return, at the same speed in each direction. Add SF016 for independent up and down speeds.Independent Up and Down speedsSF016Individually specify speeds for the up and down directions.–Low speed extensionSF017Extends the standard speed range down to 0.001 in/min (0.02 mm/min).–High speed extensionSF018SF018-1ESM1500 / ESM1500S: Extends max speed to 90 in/min (2,300 mm/min).ESM750 / ESM750S: Extends max speed to 60 in/min (1,525 mm/min).–Break detectionSF019Crosshead stops at a programmable drop in force.Series 7 or 5 gauge or indicatorLoadholdingSF020Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.Series 7 or 5 gauge or indicatorIf a specified time is required, order SF014 cycling / dwell time optionPreload / sample touchSF021Stops the crosshead and/or zeroes the travel display at an initial preload – useful in tensile, spring, elongation, and other applications.SF009 travel indicationSeries 7 or 5 gauge or indicatorProfilesSF022Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.–Complete options packageSFCOMP (ESM1500 / ESM750)SFCOMP-1 (ESM1500S / ESM750S)Includes all functions listed above.Requires a Series 7 or 5 gauge or indicator. Hardware and Software Options Indicators and Force GaugesSelect from Model M7I or M5I indicators for -LC test stands, or Series 7 or Series 5 force gauges for -FG test stands.Note: At 500 lbF (2,500 N) or more, force gauges are not recommended for applications involving sudden, sharp breaks. Examples include compression of brittle materials, pull testing of welds, etc. Consider an -LC test stand with indicator and load cell. Series R01 force sensorsS-beam load cells for use with any Mark-10 indicator. Capacities from 50 to 2,000 lbF (250 N to 10 kN). Series R03 force sensorsInline force sensors for use with any Mark-10 indicator. Capacities available from 0.25 to 100 lbF (1 to 500 N). Data collection & motion control softwareConsider MESUR®gauge Plus for force vs. travel or force vs. time data acquisition, plotting, analysis, reporting, as well as motion control. The software coordinates motor start / stop and data acquisition with one click.Note: MESUR®gauge Plus does not require any optional test stand functions, such as PC Control. If force vs. travel vs. time output is required, order the Travel Indication option. See below section for details. Safety Shield (AC1092-1, AC1092-2)Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing test stand operation while the door is open. Remote emergency switch (AC1074)Convenient for when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, and plugs directly into the rear of the test stand. The standard, attached emergency switch remains operational while the remote switch is plugged in. Control panel tabletop mounting kit (AC1085, ESM303-004)For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting. Use AC1085 for test stands produced in November 2020 or later, or ESM303-004 for test stands produced earlier. Base plate, matrix of holes (AC1055)Features a matrix of #10-32 threaded holes and a 1/2-20 center hole, ideal for custom fixture mounting. Base plate, three hole sizes (AC1054)#10-32, 5/16-18, and 1/2-20 holes are provided, along with an array of four 1/4-28 holes. Load cell hardware kit (AC1064)Set of mounting hardware for other manufacturers’ load cells with #10-32, 1/4-28, and 1/2-20 mounting threads. Note that Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for -LC test stand models, ex. ESM750LC. Eye end adaptersAllow for quick grip installation and removal, and prevent grip rotation.Mount to common test frames, load cells, and force gauges. Downloads Mark-10 ESM1500 / ESM750 Motorized Tension / Compression Test Stands - Data SheetMark-10 ESM1500 / ESM750 Motorized Tension / Compression Test Stands - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm750-esm1500-high-capacity-motorized-test-stand-p-984.html Fri, 01 Aug 2025 20:12:50 +0000 USD 984 Mark-10 1000 ESM1500 https://www.abqindustrial.net/store/images/mark-10-esm750-esm1500-high-capacity-motorized-test-stand.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-771.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm1500-high-capacity-motorized-test-stand-4408.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm1500-high-capacity-motorized-test-stand-2615.png https://www.abqindustrial.net/store/images/additional/mark-10-esm1500-high-capacity-motorized-test-stand-2616.png https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-780.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-777.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-776.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-775.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-779.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-773.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-772.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-761.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-770.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-769.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-768.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-767.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-766.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-765.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-778.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-763.jpg https://www.abqindustrial.net/store/images/additional/esm1500-high-capacity-motorized-test-stand-762.jpg 984 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logging-p-986.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=986 Shimpo FGS-220VC Motorized Force Test Stands with PC Control & Data Logging Force Gauge sold SeparatelyCapacity: 220 lb (100kg ,1000N)The Shimpo FGS-VC Series Motorized Force Test Stands are designed to provide accurate and repeatable results for tension, compression, break and cycle performance tests in various applications. A key feature is a FGS-VC exclusive: a precision made servo gear head and ball screw for precise movement control. The large measurement area plus tall 15.75" (400 mm) travel distance allow large, unique parts to be tested. A precise and consistent 0.40-15.75"/min (10-400mm/min) adjustable speed provides for slow tests or quick cycle load testing.The simple keypad combined with the intuitive on screen operation guides the user through setting up each test. Users can perform standard tests in several automatic or manually selected modes as well as choose higher-end capabilities with the additional dwell time, adjustable acceleration, plus user-defined tests with up to 5 programmed set points.The Shimpo FGS-VC's are flexible as they can be operated by the keypad or through a PC via the FGT-VC software which includes data collection, graphing and statistical analysis. The FGT-VC software program allows graphing of force versus distance and the ability to compare several tests on a single graph. Another great feature of the FGT-VC is the comparator mode which enables quick decision pass /fail determination, ideal for production line testing.The FGS-VC's can be equipped with various gripping and compression fixtures and are compatible with all of our Force Gauges as well as most gauges on the market. These features make the new FGS-VC the ideal push/pull tester for the production line or QC lab. Features User friendly controls and software allows hands off operation, reduces training time, user errors and speeds up testsThe wide speed range means only one stand required for a majority of testing needsEasy install force gauge bracket allows for multiple test ranges to be quickly used on one standFGT-VC software provides graphing analysis of one or several tests. Data can be stored for later analysisComparator function provides instant pass/fail result allowing for usage on production linesCombining with FGE or FGV force gauges with the stand, overload limit communication is achieved, eliminating potential to damage the gauge accidentally during a test Specifications Capacity220 lb (100kg ,1000N)Travel Speed0.40-15.75"/min (10-400mm/min)Speed Accuracy±5%Stroke15.75 in (400 mm)DisplayDot-matrix LCD Four digitOperation ModeSingle (SING); Continuous (CONT); Program (PROG); Manual (MANU); Jogging (JOG)CommunicationUSBInputOver load from force gauge (The stand will stop immediately, if the over load is detected by force gauge.)Measurement Table5.91 x 7.87" (150 x 200 mm)Temperature Limits32 to 113 °F (0 to 45 °C)Power120VAC/240VAC selectableDimensions11.81 x 34.84 x 19.69" (300 x 885 x 500mm)Weight139 lb (63 kg)Included AccessoriesUSB cable, Force gauge communication cable, gauge/plate Mounting accessoriesWarranty1 year Downloads Shimpo FGS-220VC Motorized Force Test Stand with PC Control & Data Logg - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logging-p-986.html Fri, 17 May 2024 20:10:08 +0000 USD 986 Shimpo 1000 FGS-220VC https://www.abqindustrial.net/store/images/fgs-220VC-motorized-test-st.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2979.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2978.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2980.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2981.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2982.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2983.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2984.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2985.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2986.jpg https://www.abqindustrial.net/store/images/additional/shimpo-fgs-220vc-motorized-force-test-stand-with-pc-control-and-data-logg-2987.gif 986 0 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm500-motorized-test-stand-p-1005.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1005 Mark-10 TSFM500 Motorized Test Stand with FORCE CONTROL Force Gauge sold Separately1100lb CapacityTSFM500 - Vertical StandTSFM500H - Horizontal StandThe TSFM500 is designed for compression and tension testing of springs, packaging, metals, fabrics, and other items requiring up to 500 lb of force. Generous clearance and throat depth accommodate a broad range of sample shapes and sizes. The stand features a remote control unit for added safety during testing. The TSFM500’s durable and rigid column minimizes bend, making it particularly well suited for precision spring testing.The operator can select from a speed range of 0.2 – 5.5 in/min. Other features include a manual fine adjustment knob and a stepper motor that prevents speed variation with load, making testing more precise and repeatable. Photo Gallery Features Maximum force: 500 lb [2200 N]Mounting holes for bench mountingSpeed range: 0.2 - 5.5 in/min [5 - 140 mm/min]Base may be removed for alternative mountingRemote control console with a 3' [1 M] cableAvailable in vertical and horizontal orientations.Maximum travel: 4" [102 mm]Compatible Gagues: Series 3, Series 5.Loading table with 25 #10-32 UNF holes for fixture mountingIncludes adjustable Limit SwitchesManual travel knob Specifications Capacity500lbs (2.2Kn)Stroke4.00" (102 mm)Speed Range0.2 - 5.5 in/min (5 - 140 mm/min)Speed accuracy±0.2% of setting, ±0% variation with loadDimensionsClick here to downloadWeightVertical Model: 36 lb (16.3 kg)Horizontal Model: 30 lb (13.6 kg)Compatible GaugesSeries 3, Series 5.Warranty3 years Related Products Series-3Digital Force GaugeHigh-speed 2,000 Hz sampling rateIncludes NIST Traceable Calibration Cert Click image for more info Series-5Advanced Digital Force Gauge - Model M5High-speed 7,000 Hz peak sampling rateUSB, RS-232, Mitutoyo, and analog outputs Click image for more info Downloads TSFM500 Motorized Test Stand - Data SheetTSFM500 Motorized Test Stand - Dimensional DrawingTSFM500 Motorized Test Stand - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-tsfm500-motorized-test-stand-p-1005.html Fri, 01 Aug 2025 20:12:49 +0000 USD 1005 Mark-10 1000 TSFM500 https://www.abqindustrial.net/store/images/TSFM500.jpg 1005
The operator can select from a speed range of 0.2 – 5.5 in/min. Other features include a manual fine adjustment knob and a stepper motor that prevents speed variation with load, making testing more precise and repeatable. ]]> 0 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh2-110-horizontal-motorized-test-stand-p-1138.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1138 Imada MH2-110 Horizontal Motorized Test StandForce Gauge sold Separately110 lb CapacityStroke: 9" (230mm)The Imada MH2-110 Horizontal Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results. Precise Increment Mode Imada MH2-110 features unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approx. 0.01mm (standard speed, under no load). Cycle Mode In cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Set start and return speeds independently. Force Control Force controlled non-destructive tests are also easy to setup and program. Connect a Z Series force gauge to the MH2 test stand to enable the following force controlled tests and Conditional Overload Prevention. Maintain Force Between High/Low Setpoints Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle. Increase Force to High Setpoint and Stop Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point on the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series gauge. Ideal for non-destructive or creep testing. The cycle repeats until the counter limit is reached. Features Selectable Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges)Ultra rigid, .5 mm deflection at maximum loadConditional Overload PreventionStroke: 9" (230mm)Easy-to-use program dial and menu screens control mode, speed, timer, cyclesProgrammable timer up to 99' 59.9 sec in 0.1 sec incrementsUp to 65,535 cycles Speed Configurations ModelSpeed (mm)Capacity (lbf)MH2-110 (standard)10 ~ 300110MH2-110-V90050 ~ 90033MH2-110-V60020 ~ 60055MH2-110-V903 ~ 90110MH2-110-V451.5 ~ 45110 FA Option MH2-110-FA test stands with incremental linear encoders record displacement in mm or inches on ZTA force gauges. Displacement can be reset to zero at a predetermined force. Optional Force Recorder software is available for force vs. displacement graphing.FA SpecificationsRange11.000" (280.00 mm)Resolution0.0001" (0.01 mm)Accuracy0.004" (0.1 mm) Digital Distance Meter Available with models MH2-110-S. Optional SW-1 data acquisition software is availableDistance Meter SpecificationsDisplayPush button: inch/mm, zero, on/off)Resolution0.0005" (0.01 mm)Accuracy0.004" (0.1 mm) Related Products ZT-SeriesDigital Force Gauge with high speed data output, up to 2000hzProcesses and transmits 2,000 data/sec Click image for more info Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh2-110-horizontal-motorized-test-stand-p-1138.html Tue, 02 Apr 2024 21:09:02 +0000 USD 1138 Imada 994 MH2-110 https://www.abqindustrial.net/store/images/MH2-110%20High%20Performance%20Horizontal%20Motorized%20Test%20Stand.jpg https://www.abqindustrial.net/store/images/additional/imada-mh2-110-high-performance-horizontal-motorized-test-stand-2959.jpg https://www.abqindustrial.net/store/images/additional/imada-mh2-110-high-performance-horizontal-motorized-test-stand-2960.jpg 1138 6 /store/images/warranty-1-year-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303-high-performance-motorized-test-stand-p-1260.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1260 Mark-10 ESM303 High Performance Motorized Test StandForce Gauge sold SeparatelyDistance Measurement, Break Detection, Load Holding and many other featuresMade in the USA, 3 Year WarrantyThe Mark-10 ESM303 High Performance Motorized Test Stand is designed for tension and compression measurement up to 300 lb / 1500 N. Its rugged design is suitable for laboratory and production environments. With generous travel, clearance, and depth, a wide range of tests can be performed, including destructive testing, cycling, limit testing to load or distance, load-holding, elongation testing, tensile testing, compression testing, and more.A simple menu allows the user to program test speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save up to 50 profiles to accommodate a range of test methods.If the Mark-10 ESM303’s clearance is insufficient for the application, its modular mechanical design allows for single and double-column extensions.The Mark-10 ESM303 High Performance Motorized Test Stand offers and range of optional functions to extended its capability such as travel measurement, cycling, loadholding, etc., may be purchased either upfront or enabled in the field through an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and budget.Force and travel data can be output to a PC for graphing and analysis using MESUR™gauge software. Or, fully control the stand by a PC through a custom-written program with ASCII communication. Kit Contents Mark-10 ESM303 High Performance Motorized Test Stand G1024 extension rod, 2”G1028 small hookG1038 medium hookG1039 coupling, #10-32F/FG1009 compression plate, 2” dia.G1030 thread adapter, 5/16-18M to #10-32FThumb screw for force gauge / indicator (4 - four)Thumb screw for limit switch (2 - two)Allen wrench setControl panelControl panel mounting bracket and hardware Click image to enlarge Features Compatible with all Mark-10 force gauges, accessories and gripsMounting holes for bench mountingLoading table with 25 #10-32 UNF holes for fixture mountingPrecision Acme screw and nutOptional digital travel display Specifications Load capacity300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min)200 lbF (1 kN) @ >24 in/min (610 mm/min)Maximum travel distance18.0 in (457 mm)Speed rangeStandard: 0.5 - 13 in/min (13 - 330 mm/min)Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min)Speed setting accuracy±0.2%Speed variation with load±0% (stepper motor driven)Travel accuracy±0.002 in per 10 in (±0.05 mm per 250 mm)Travel resolution0.001 in / 0.02 mmLimit switch repeatability0.001 in (0.03 mm)PowerUniversal input 80-240 VAC, 50/60 HzWeight56.5 lb (25.6 kg)Included accessoriesG1024 5” extension rod, G1028 small hook, G1038 medium hook, G1039 #10-32 coupler, G1009 2” dia. compression plate, gauge/indicator mounting screws, Allen wrench set, and Resource CD.Warranty3 years Related Products Series-7iProfessional Force and Torque IndicatorContinous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC Click image for more info Series-5iAdvanced Force/Torque Indicator1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs Click image for more info Series-3iForce and Torque IndicatorInterchangeable force and torque sensors through Plug & Test™technologyUSB data output Click image for more info Downloads Mark-10 ESM303 High Performance Motorized Test Stand, 300lb Capacity - Data SheetMark-10 Series F / Series ESM - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303-high-performance-motorized-test-stand-p-1260.html Tue, 17 Feb 2026 19:28:23 +0000 USD 1260 Mark-10 963 ESM303 https://www.abqindustrial.net/store/images/mark-10-esm303-advanced-motorized-test-stand-300-lb-capacity.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-748.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-750.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-751.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-752.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-753.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-754.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-755.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-756.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-757.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-758.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-759.jpg https://www.abqindustrial.net/store/images/additional/esm303-high-performance-motorized-test-stand%2C-300lb-capacity-760.jpg 1260 36 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303h-advanced-motorized-horizontal-test-stand-p-1784.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1784 Mark-10 ESM303H Advanced Motorized Horizontal Test StandForce Gauge sold SeparatelySelectable speed settingRight and left travel limit switchesThe Mark-10 ESM303H Advanced Motorized Horizontal Test Stand is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the load cell to move the crosshead at a variable rate of speed.With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more. Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save up to 50 profiles to accommodate a range of test methods.When the Mark-10 ESM303H’s clearance is insufficient for the application, its modular mechanical design allows for frame extensions. Modularity extends to the controller functions as well. Individual functions, such as travel measurement, cycling, loadholding, etc., may be purchased either upfront or enabled in the field through an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and budget.Collect force and travel data, plot and analyze the results, and control test stand motion via PC-based MESUR™gauge Plus software. Or, fully control the stand by a PC through a custom-written program in any language supporting ASCII communications. Kit Contents Features Selectable speed settingRight and left travel limit switchesAdjustable, removable control panel may be mounted to the left or right end of the framePassword protection of test parametersStepper motor-driven, producing smooth and quiet operation with no speed variation under loadUSB output of force or force vs. travelCompact footprint, suitable for crowded work benchesErgonomic design, with smart, clean cable managementIntegrated electronics assembly, easily removed and transported for serviceAdjustable mounting plate with T-slot base Specifications Load capacity300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min) 200 lbF (1 kN) @ >24 in/min (610 mm/min)Maximum travel distance18.0 in (457 mm)Speed rangeStandard: 0.5 - 13 in/min (13 - 330 mm/min) Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min)Speed setting accuracy±0.2% of settingSpeed variation with load±0% (stepper motor driven)Travel accuracy*±0.002 in. per 10 in. (±0.05 mm per 250 mm)Travel resolution0.001 in / 0.02 mmLimit switch repeatability0.001 in (0.03 mm)PowerUniversal input 80-240 VAC, 50/60 HzWeight62.5 lb (28.4 kg)Warranty3 years (see individual statement for further details)* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance Hardware and Software Options Control panel tabletop mounting kit For applications requiring remote use of the control panel. Consists of a base with mounting hardware for the angle bracket (bracket is included with the test stand). Base contains thru holes for bench mounting. Data collection & motion control softwareConsider MESUR™gauge Plus for force vs. travel or force vs. time data acquisition, plotting, analysis, reporting, as well as motion control. The software coordinates motor start / stop and data acquisition with one click.Note: MESUR™gauge Plus does not require any optional test stand functions for motor control. Consider the Travel Indication option for force vs. travel vs. time output. See below section for details. IndicatorsSelect from Models M7i or M5i. Both indicators mount directly to the crosshead adapter.Note: Force gauges cannot be mounted to the ESM303H test stand. Series R01 S-beam load cells Select from a range of capacities, from 50 lbF (250 N) and higher. Add suffix "-1" for shortened cable, for optimal mounting. Ex: MR01-100-1. Series R03 inline load cellsSelect from a range of capacities, from 0.25 lbF (1 N) and higher. Add suffix "-1" for short ened cable, for optimal mounting. Ex: MR03-50-1. Interface cable, indicator to test stand (09-1252) Connects an M7i or M5i indicator to the crosshead. This single cable is used to transmit data and power. The indicator's AC adapter is not required USB cable, test stand to PC (09-1158) For force and travel data output and PC control. Load cell hardware kit (AC1064) Set of mounting hardware to mount other manufacturers' load cells with #10-32, 1/4-28, or 1/2-20 mounting threads.Note: Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for an ESM303H. Frame extensions (ESM303-001-1 / -2 / -3) Increase the clearance for long samples. Multiple extensions may be stacked for very long samples.Three lengths are available: 6, 12 and 24 in [150, 300, and 600 mm] Eye end adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges Optional Functions Any of the below functions may be purchased at time of order or may be enabled in the field at a later date via a code activation process. The only exception is the AF009 travel measurement option, which additionally requires field hardware installation.A complete options package is also available, including all of the below functions at a discounted price. The test stand is shipped in Demo Mode, during which time all available functions are temporarily enabled for 160 hours of operationFunctionPart No.DescriptionFollowMe™AF008Crosshead movement responds to manually pushing or pulling on the load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.Travel indicationAF009Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.Computer controlAF010The ESM303H may be fully controlled by a PC through a program written in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10).This option is not required for MESUR™gauge Plus software.Prog. travel limitsAF011The stand stops at or cycles between programmable right and left travel distances.Overload protectionAF012Protects a load cell against overload. Program the desired percentage of full scale of the load cell. Adjustable analog voltage setting allows the stand to interface with virtually any instrument with analog output.Auto ReturnAF013The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.Cycling / dwell timeAF014Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for right and left limits (set independently) can be set up for up to 10,000 seconds.Independent right and left speedsAF016Configurable speeds for right and left directions.Low Speed ExtensionAF017Extends the standard speed range down to 0.02 in/min (0.5 mm/min).High Speed ExtensionAF018Extends the standard speed range up to 45 in/min (1,100 mm/min).Break DetectionAF019Crosshead stops at a sudden drop in force. Programmable percentage of peak force.Load HoldingAF020Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time.Preload / Sample TouchAF021Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero, and (3) zero without stopping.ProfilesAF022Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.Complete Options PackageAFCOMP-HIncludes all functions listed above, plus 09-1252 interface cable and 09-1158 USB cable. Requires a Model M7i or M5i indicator Related Products Series-7Professional Digital Force GaugeHigh-speed 14,000 Hz sampling rateIndividual data point memory for up to 5,000 data points, downloadable to a PC Click image for more info Series-5Advanced Digital Force Gauge - Model M5High-speed 7,000 Hz peak sampling rate1,000-point data memory with statistics and outputs Click image for more info ESM750High Capacity Motorized Test StandCompatible with indicators and load cells, as well as force gauges Click image for more info ESM1500High Capacity Motorized Test StandCompatible with indicators and load cells, as well as force gauges Click image for more info ESM303High Performance Motorized Test Stand, 300lb CapacityAdjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min)USB output of force vs. time or force vs. travel (with optional travel measurement) Click image for more info MESURgaugeMESURgauge / MESURgauge Plus Load & Travel Analysis SoftwareMESURgauge Plus starts and stops models ESM303, ESM303H, and ESM1500 motorized test stands, coordinating motion control and data collection with just one click Downloads ESM303H Advanced Motorized Test Stand - Data SheetESM303H Advanced Motorized Test Stand - Instruction ManualESM303H Advanced Motorized Test Stand- Code ExampleESM303H Advanced Motorized Test Stand - Serial Write ReadESM303H Advanced Motorized Test Stand - Solid Models Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-esm303h-advanced-motorized-horizontal-test-stand-p-1784.html Tue, 17 Feb 2026 19:24:45 +0000 USD 1784 Mark-10 999 ESM303H https://www.abqindustrial.net/store/images/mark-10-esm303h-advanced-motorized-horizontal-test-stand-300-lb-capacity.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2610.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2609.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2608.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2607.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2606.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2605.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2604.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2603.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2602.jpg https://www.abqindustrial.net/store/images/additional/mark-10-esm303h-advanced-motorized-test-stand%2C-300lb---1500-n-capacity---horizontal-2601.jpg 1784 1 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-p-1991.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1991 Force Sensor Sold SeparatelyComputer Controlled Force Test FrameForce Capacities up to 500 lbF (2.2 kN)Easily Program Multi-Step TestsThe Mark-10 F105 / F305 / F505 / F505H Series-F Advanced Force Test Stands is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load. Kit Contents Mark-10 Series-F IMT Advanced Force Test StandsControl panel, mounting bracket, and hardwareMounting bracket, column end (F505H only)USB cable#10-32M medium hook5/16-18M large hook#10-32F 2” diameter compression plate#10-32 M/F 2” extension rod#10-32 F/F couplerAdapter, 5/16-18M to #10-32FSet screw, #10-32 x 3/4”Hex nut, #10-32 (2)Power cordAllen wrench setNIST-traceable certificate of calibration, force Click image to enlarge Mark-10 Series-F IM Advanced Force Test StandsMounting bracket, column end (F505H only)USB flash drive containing software installation filesUSB dongleUSB cable#10-32M medium hook5/16-18M large hook#10-32F 2” diameter compression plate#10-32 M/F 2” extension rod#10-32 F/F couplerAdapter, 5/16-18M to #10-32FSet screw, #10-32 x 3/4”Hex nut, #10-32 (2)Power cordAllen wrench setNIST-traceable certificate of calibration, force Click image to enlarge Features IntelliMESURIntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including: Limit testing to a load, break, or distanceHeight measurementLoad holdingCycle testingMulti-step testing, utilizing any combination of the above functionsRun individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.Load LimitDistance LimitBreak LimitLoad HoldCycle Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:Move to loadMove to distanceMove to breakHold a load or positionHold a load or positionLoop / cycleDatumPromptsSave current load or positionZero load or positionReturn to Home position Specifications Maximum travel18.0 in / 457 mmSpeed range0.02 – 45 in/min /0.5 – 1,100 mm/minLoad accuracy (% of full scale)Test frame: ±0.1%Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%Load sampling rate20,000 HzData acquisition rate1,000 HzSpeed accuracy±0.2% of setting, virtually no variation with loadDistance accuracy±0.002 in [0.05 mm], factory-compensated at up to full loadDistance resolution0.0005 in / 0.01 mmLimit switch repeatability±0.001 in / 0.03 mmPowerUniversal input 100-240 VAC, 50/60 Hz, 300WFuse type1.2 A, 250V, 3AG, SLO BLOWeight (test frame only)F105/F305: 60 lb / 27 kgF505/F505H: 70 lb / 32 kgShipping weightF105/F305: 75 lb / 34 kgF505/F505H: 85 lb / 39 kgTemperature range40 – 95°F / 5 – 35°CHumidity rangeup to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingConformanceCEWarranty3 years Force Ranges ModelTest Frame Capacity*Maximum TravelF105100 lbF / 0.5 kN18.0 in / 457 mmF305300 lbF / 1.5 kN18.0 in / 457 mmF505500 lbF /2.2 kN18.0 in / 457 mmF505H500 lbF /2.2 kN18.0 in / 457 mm*Load capacity is reduced at higher speeds, as follows:F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/minF505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min Related Products Mark-10 ESM303 High Performance Motorized Test StandAdjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min)USB output of force vs. time or force vs. travel (with optional travel measurement) Click image for more info Mark-10 Series FS05Tension and Compression Force SensorsForce Sensors for use with Series F Test FramesCapacities up to 500 lb / 2.5 kN Click image for more info Downloads Mark-10 Series F Advanced Force Test Stands - BrochureMark-10 Series F Advanced Force Test Stands - Instruction ManualMark-10 Series F / Series ESM - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-p-1991.html Wed, 11 Mar 2026 20:24:19 +0000 USD 1991 Mark-10 994 Series F https://www.abqindustrial.net/store/images/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5821.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5831.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5830.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5829.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5828.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5827.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5826.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5825.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5824.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5823.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5822.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5809.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5820.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5818.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5819.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5816.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5815.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5814.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5813.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5812.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5811.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f105-f305-f505-f505h-series-f-advanced-force-test-stands-5810.jpg 1991 6 /store/images/product_warranty_image/1991/warrenty-3-years.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f755-f1505-advanced-test-frames-p-2055.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2055 Mark-10 F755 - F1505 Advanced Test FramesRigid and precise by designExternal limit switchesEasy-to-service electronicsThe Mark-10 F755 - F1505 Advanced Test Frames are designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device. Kit Contents The F755-IMT, F755S-IMT, F1505-IMT, and F1505S-IMT advanced test frames include the following accessories:Control panel, mounting bracket, and hardwareUSB cableEye end kit for base Includes:eye end,anchor pin, (2) lock rings2 Spanner wrenchPower cordAllen wrench setNIST-traceable certificate of calibration, force Click image to enlarge The F755-IM, F755S-IM, F1505-IM, and F1505S-IM advanced test frames include the following accessories:USB flash drive containing software installation filesUSB dongleUSB cableEye end kit for base Includes: eye end, anchor pin, 2 - lock rings2 - Spanner wrenchPower cordAllen wrench setNIST-traceable certificate of calibration, force Click image to enlarge Features Rigid and precise by designExceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.External limit switchesSolid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.Easy-to-service electronicsMost electronics are housed in an integrated module, easily replaced without special tools or processes. Specifications F755F755SF1505F1505SLoad capacity1750 lbF[3.4 kN]1,500 lbF[6.7 kN]Maximum travel32.0 in[813 mm]14.2 in[360 mm]32 in[813 mm]14.2 in[360 mm]Speed range0.001 - 60 in/min[0.02 - 1,525 mm/min]0.001 - 70 in/min[0.02 - 1,800 mm/min]Load accuracy (% of full scale)Test frame + force sensor, calibrated together: ±0.1%Test frame alone: ±0.1%Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%Speed setting accuracy±0.2%Load sampling rate20,000 HzData acquisition rate1,000 HzSpeed accuracy±0%, stepper motor drivenDistance accuracy±0.002 in [0.05 mm], factory-compensated at up to full loadDistance resolution0.0005 in [0.01 mm]Limit switch repeatability±0.001 in [0.03 mm]PowerUniversal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 450WFuse type4A, 3AG, SLO BLOWeight (test frame only)184 lb[83 kg]149 lb[68 kg]197 lb[89 kg]157 lb[71 kg]Shipping weight235 lb[107 kg]195 lb[88 kg]247 lb[112 kg]205 lb[93 kg]Environmental conditionsIndoor use onlyUp to 6,500 ft [2,000 m] above sea levelTemperature range: 40 - 95°F [5 - 35°C]Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingMains supply voltage fluctuations up to ±10 % of the nominal voltageTransient overvoltages up to the levels of Overvoltage Category IIUse in environments up to Pollution Degree 2Warranty3 years [see individual statement for further details]ConformanceCELoad capacity is reduced at higher speeds, as follows:F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/minF1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/minMay be extended via single- or double-column extensions.Model No.HS CodeECCNCountry of OriginF755-IMT, -IMF755S-IMT, -IMF1505-IMT, -IMF1505S-IMT, -IMAC1093-1,-2AC10939024900000EAR99USACERT-DS9024800000 IntelliMESUR IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:Limit testing to a load, break, or distanceHeight measurementLoad holdingCycle testingMulti-step testing, utilizing any combination of the above functionsRun individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.Load LimitDistance LimitBreak LimitLoad HoldCycleMulti-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:Move to loadMove to distanceMove to breakHold a load or positionHold a load or positionLoop / cycleDatumPromptsSave current load or positionZero load or positionReturn to Home position Model Description Test Frame + Pre-configured Tablet Control Panel ModelDescriptionF755-IMTTest frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V*F755S-IMTTest frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V*F1505-IMTTest frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V*F1505S-IMTTest frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V*Test Frame + Standalone Software (for customer installation on a Windows device)ModelDescriptionF755-IMTest frame with IntelliMESUR® software, single license, vertical, 750 lbF / 3.4 kN, 110V*F755S-IMTest frame with IntelliMESUR® software, single license, vertical, short, 750 lbF / 3.4 kN, 110V*F1505-IMTest frame with IntelliMESUR® software, single license, vertical, 1,500 lbF / 6.7 kN, 110V*F1505S-IMTest frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V*All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE. Tablets are supplied with a universal power supply, however, are only available with a US prong. A prong adapter is included when one of the above-mentioned suffixes is specified. Related Products  Mark-10 ESM303High Performance Motorized Test StandAdjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min)USB output of force vs. time or force vs. travel (with optional travel measurement)Mark-10 Series FS05Tension and Compression Force SensorsForce Sensors for use with Series F Test FramesCapacities up to 500 lb / 2.5 kN Downloads Mark-10 F755 - F1505 Advanced Test Frames - Data SheetMark-10 F755 - F1505 Advanced Test Frames - Instruction ManualMark-10 F755 - F1505 Advanced Test Frames - Quick Guide Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-f755-f1505-advanced-test-frames-p-2055.html Wed, 11 Mar 2026 20:24:18 +0000 USD 2055 Mark-10 999 F755-F1505 https://www.abqindustrial.net/store/images/mark-10-f755-f1505-advanced-test-frames-test-stands-motorized.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6251.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6252.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6253.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6254.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6255.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6256.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6257.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6258.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6259.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6260.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6261.jpg https://www.abqindustrial.net/store/images/additional/mark-10-f755-f1505-advanced-test-frames-6262.jpg 2055 1 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-lr-tension-and-compression-test-frame-p-2059.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2059 EasyMESUR Tension and Compression Force Test FrameCapacities up to 500 lbs / 2.2 kNForce vs Distance Measurement, Break Detection, Load Holding, and many other features OPTIONALMade in the USA, 3-Year Warranty4 ModelsF105 - 100 lb / 0.5 kN - VerticalF305 - 300 lb / 1.3 kN - VerticalF505 - 500 lb / 2.2 kN - VerticalF505H - 500 lb / 2.2 kN - HorizontalLoad Cell and Grips Sold SeparatelyThe Mark-10 Easy MESUR-LR Tension and Compression Test Frame is engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Kit Contents The F105-EM, F305-EM, F505-EM, and F505H-EM advanced test frames are shipped as shown at left, and includes the following accessories:Control panel, mounting bracket, and hardware#10-32M medium hook5/16-18M large hook#10-32F 2” diameter compression plate#10-32 F/F couplerAdapter, 5/16-18M to #10-32FSet screw, #10-32 x 3/4”2 Hex nut, #10-32Power cordAllen wrench set Click image to enlarge Specifications F105-EMF305-EMF505-EMF505H-EMLoad capacity*100 lbF[0.5 kN]300 lbF[1.3 kN]500 lbF[2.2 kN]Maximum travel18.0 in | [457 mm]Standard speed range0.5 – 13 in/min | [13 – 330 mm/min]Optional speed range0.02 – 45 in/min | [0.5 – 1,100 mm/min]Load accuracy(% of full scale)Test frame: ±0.1%Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15%Load sampling rate5,000 HzData acquisition rate100 HzSpeed accuracy±0.2% of setting, virtually no variation with loadPosition accuracy±0.006 in [0.15 mm], at any load or positionDistance resolution0.001 in [0.02 mm]Limit switch repeatability±0.001 in [0.03 mm]Overload protectionMotor stops at 120% of full scale of the force sensorPowerUniversal input 100-240 VAC, 50/60 Hz, 120WFuse type1.2 A, 250V, 3AG, SLO BLOWeight (test frame only)60 lb[27 kg]70 lb[32 kg]Shipping weight75 lb[34 kg]85 lb[39 kg]Environmental conditionsIndoor use onlyUp to 6,500 ft [2,000 m] above sea levelTemperature range: 40 - 95°F [5 - 35°C]Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingMains supply voltage fluctuations up to ±10 % of the nominal voltageTransient overvoltages up to the levels of Overvoltage Category IIUse in environments up to Pollution Degree 2ConformanceCE, UKCAWarranty3 years [see individual statement for further details]* Load capacity is reduced at higher speeds, as follows:F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/minF505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/minModel No.HS CodeECCNCountry of OriginF105-EMF305-EMF505-EMF505H-EMAC1094-1,-2, -3AC1095-1,-2,-39024900000EAR99USAAC1092-1,-2CERT-DS9024800000 Functions Any of the below functions may be purchased at time of order or may be enabled in the field at a later date through a code activation process.A complete options package (EMP-COMP-1) is also available, including all of the below features at a discounted price.The test frames are shipped in Evaluation Mode, during which time all available functions are temporarily enabled for 160 hours of operation.Individual FunctionsFunctionPart No.DescriptionCo-requirementsDistance MeasurementEMF001-1Measure distance, with the ability to zero the reading.-Distance LimitsEMF002-1Stop at user-defined upper and lower distance limits.- Distance Measurement (EMF001-1)PreloadEMF003-1Zero the travel position automatically at a user-defined preload value.- Distance Measurement (EMF001-1)High Speed ExtensionEMF004-1Extend the high end of the speed range, dependent upon test frame model.-Low Speed ExtensionEMF005-1Extend the low end of the speed range, dependent upon test frame model.-CyclingEMF006-1Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits.- If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1)Break DetectionEMF007-1Stop when a user-defined drop in force occurs.-Load HoldingEMF008-1Stop at, and maintain, a user-defined load for a specified period of time.-FollowMe®EMF009-1Push and pull on the sensor’s loading shaft to jog the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force.-Graphing & ReportingEMF010-1Graph load vs. time or distance, view statistics, and generate a report, including graph, results, run data, and other information.- If graphing load vs. distance, add Distance Measurement (EMF001-1)PC ControlEMF011-1Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls.- AC1107 cable, test frame to PCPackagesPackagePart No.IncludesDistance MeasurementEMP001-1Distance Measurement (EMF001-1)Distance Limits (EMF002-1)Preload (EMF003-1)Speed ExtensionEMP002-1High Speed Extension (EMF004-1)Low Speed Extension (EMF005-1)Advanced FunctionalityEMP003-1Cycling (EMF006-1)Break Detection (EMF007-1)Load Holding (EMF008-1)FollowMe® (EMF009-1)Complete OptionsEMP-COMP-1All functions Related Products Mark-10 Series FS05Tension and Compression Force SensorsForce Sensors for use with Series F Test FramesCapacities up to 500 lb / 2.5 kN Click image for more info Mark-10 Series FS06Tension and Compression Force SensorsMeasure tension and compression forceSuitable for larger and heavier grips and fixtures Click image for more info Mark-10 Series R07S-Beam Force Sensor Click image for more info Mark-10 AC1092Shields for Test Frames and Test StandsForce Sensors for use with Series F Test FramesCapacities up to 500 lb / 2.5 kN Click image for more info Downloads Mark-10 Easy MESUR-LR Tension and Compression Test Frame - Data SheetMark-10 Easy MESUR-LR Tension and Compression Test Frame - Instruction ManualMark-10 Easy MESUR-LR Tension and Compression Test Frame - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-lr-tension-and-compression-test-frame-p-2059.html Wed, 11 Mar 2026 20:24:18 +0000 USD 2059 Mark-10 994 EasyMESUR-LR https://www.abqindustrial.net/store/images/mark-10-easymesur-lr-tension-and-compression-test-frame.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6282.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6283.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6284.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6285.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6286.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6287.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6288.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6289.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6290.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6291.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6292.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easy-mesur-lr-tension-and-compression-test-frame-6293.jpg 2059 6 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-p-2120.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2120 Capacities up to 1500 lbs / 6.7 kNForce vs Distance Measurement, Break Detection, Load Holding, and many other featuresMade in the USA, 3 Year Warranty4 ModelsTravel - 14.2in / 360mmF755S - 750 lb / 3.4 kNF1505S - 1500 lb / 6.7 kNTravel - 32in / 813mmF1505 - 1500 lb / 6.7 kNF755- 750 lb / 3.4 kNLoad Cell and Grips Sold SeparatelySeries F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures. Kit Contents Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High RangeControl panel, mounting bracket, and hardwareEye end kit for base2 Lock ring for eye end2 Spanner wrenchPower cordAllen wrench set Click image to enlarge Features 3 Year WarrantyEasy-To-Use Touch Screen ControllerAdjustable upper and lower solid state limit switchesEasy-to-service electronicsPosition accuracy of ±0.006 in / 0.15 mm under any load, at any positionSmooth, quiet operation, with virtually no speed variation under loadThe EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place Specifications  F755-EMF755S-EMF1505-EMF1505S-EMLoad capacity*750 lbF [3.4 kN]1,500 lbF[6.7 kN]Maximum travel32 in [813 mm]14.2 in [360 mm]32 in [813 mm]14.2 in [360 mm]Standard speed range0.5 - 24 in/min [10 - 600 mm/min]Optional speed range0.001 - 60 in/min [0.02 - 1,525 mm/min]0.001 - 70 in/min [0.02 - 1,800 mm/min]Load accuracy (% of full scale)Test frame: ± 0.1%Force sensor: Series FS05: ± 0.1% | Series FS06: ± 0.15% | Series R07: ± 0.15%Load sampling rate5,000 HzData acquisition rate100 HzSpeed accuracy± 0.2% of setting, virtually no variation with loadDistance accuracy± 0.006 in [0.15 mm], at any load or position, factory-compensatedDistance resolution0.001 in [0.02 mm]Limit switch repeatability± 0.001 in [0.03 mm]Overload protectionMotor stops at 120% of full scale of the force sensorPowerUniversal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 450WFuse type4A, 3AG, SLO BLOWeight (test frame only)184 lb [83 kg]149 lb [68 kg]197 lb [89 kg]157 lb [71 kg]Shipping weight235 lb [107 kg]195 lb [88 kg]247 lb [112 kg]205 lb [93 kg]Environmental conditionsIndoor use onlyUp to 6,500 ft [2,000 m] above sea levelTemperature range: 40 - 95°F [5 - 35°C]Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingMains supply voltage fluctuations up to ± 10 % of the nominal voltageTransient overvoltages up to the levels of Overvoltage Category IIUse in environments up to Pollution Degree 2ConformanceCE, UKCAWarranty3 years [see individual statement for further details] Load capacity is reduced at higher speeds, as follows:F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/minF505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min Model No.HS CodeECCNCountry of OriginF755-EMF755S-EMF1505-EMF1505S-EMAC1092-1AC1092-29024900000EAR99USACERT-DS9024800000 EasyMESUR The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:Test to a loadTest to a sample breakTest to a distanceLoad holdingCycle testingAverage force testingView data in graphical format or results tables. Save or export data as needed, or generate a report.What's your point of view?Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples.Standard ViewGraph ViewResults View View large-format load and distance values, with pass/fail status.Optional functions shown here:Distance MeasurementView a graph of load vs. distance or time, with pass/fail status.Optional functions shown here:Distance Measurement, Graphing & ReportingView results for each run, with corresponding statistics for the results.Optional functions shown here:Distance Measurement, Graphing & ReportingTest setup is easy as 1-2-3Basic testsSelect a test type, and EasyMESUR® will guide you through the setup. Load LimitDistance LimitBreak LimitLoad HoldCycleAveragingBasic Test SettingsTest directionSpeedTest-specific parametersData save preferencesResults SettingsSelect resultsEnable and configure pass/fail limitsSet data collection rateSet auto-return to homeGraph SettingsSingle-point vs. continuous graphingSet force vs. time or vs. distanceGraphing start threshold Robust data acquisition and managementBlazingly fastForce sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR® collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run.Standard reportingSave a single result per run, such as maximum load to a USB flash drive or internal storage.Save results as an EasyMESUR file for later viewing or export to a .csv file.Each run includes the run number, pass/fail status, and result, such as a maximum compression load. With the Graphing & Reporting functionView and save all data points collected during a run, including reading number, load, elapsed time, and distance (Distance Measurement function required).View statistics for the results.View a graph of load vs. time or load vs. distance (Distance Measurement function required).Create and save a report, including results and graph. Save report templates for future use.Intelligent manual controlManually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe® force-based positioning. Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments.FollowMe optional function required. Calibrate force sensors on the test frame or off-siteCalibrate force sensors in one of two ways:Test frameEasyMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces. Off-siteConveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter). Secure user accessControl user access to sensitive areas, such as test editing and calibration, via password. Related Products Mark-10 Series FS05 Tension and Compression Force SensorsCapacities up to 500 lb / 2.5 kN Click image for more info Mark-10 Series FS06 Tension and Compression Force SensorsCompatible with Model F105, F305, F505, and F505H test frames Click image for more info Mark-10 Series R07 S-Beam Force SensorCompatible with Models F755, F755S, F1505, and F1505S test frames Click image for more info Mark-10 AC1092 Shields for Test Frames and Test StandsRugged construction of frame and shield Click image for more info Downloads Mark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Data SheetMark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Instruction ManualMark-10 EasyMESUR-HR Tension and Compression Test Frame - High Range - Comparison Chart Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-p-2120.html Wed, 11 Mar 2026 20:24:19 +0000 USD 2120 Mark-10 999 EasyMESUR-HR https://www.abqindustrial.net/store/images/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6505.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6506.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6508.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6509.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6510.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6511.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6513.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6512.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6514.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6515.jpg https://www.abqindustrial.net/store/images/additional/mark-10-easymesur-hr-tension-and-compression-test-frame-high-range-6516.jpg 2120 1 images/manufacturers_warranty/7/warranty-3-new.png https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh-750-motorized-force-measurement-test-stands-p-2243.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2243 Imada MH-750 Motorized Force Measurement Test StandsForce Gauge sold SeparatelyEasy to operateThe Imada MH-750 Motorized Force Measurement Test Stands is offer basic force testing capabilities such as adjustable test speed control, force control, quick return and emergency stop functionality. Imada MH-750 Motorized Force Measurement Test Stands can be used for both tension and compression testing of high force applications. The high performance brushless motor provides extremely smooth operation. Many speed configurations are available to fit any force testing application, see the speed configuration tab for more details.Manual Mode:While the Direction switch is held left, the crosshead moves left. Holding the switch down right the cross head right. When the switch is released the head stops. This mode is ideal for positioning.Cycle Modes:Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.Single Cycle Mode:When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.Auto Cycle Mode:This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as cycle testing.The Imada MH-750 Motorized Force Measurement Test Stands accepts any high capacity Imada force gauge. The digital distance meter has PC output capabilities. Features Stroke: 11.6"(295mm)Speed: 0.3~9.4" /min (8~240mm/min)Screw feeder for smooth, positive movementHeavy-duty metal constructionEasy to operateNo programming requiredTest speed mode: fixed (presettable) or adjustableReturn speed: fixed max. or adjustableOptional digital speed indicatorOptional digital distance meter available Specifications DisplayPush button for inch/mm, zero set and on/offResolution0.0005"/0.01 mmAccuracy0.1% of reading or 0.005"/0.1 mm whichever is greater Albuquerque Industrial https://www.abqindustrial.net/store/force-and-torque-measurement-c-101/test-stands-motorized-c-101_36/imada-mh-750-motorized-force-measurement-test-stands-p-2243.html Tue, 18 Mar 2025 21:06:03 +0000 USD 2243 Imada 1000 MH-750 https://www.abqindustrial.net/store/images/imada-mh-750-motorized-force-measurement-test-stands.jpg https://www.abqindustrial.net/store/images/additional/imada-mh-750-motorized-force-measurement-test-stands-6800.jpg 2243 0 /store/images/warranty-1-year-new.png