Albuquerque Industrial : RSS Products Feed :: Ultrasonic Thickness Gauges

Albuquerque Industrial : RSS Products Feed :: Ultrasonic Thickness Gauges https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2024 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Sun, 07 Jul 2024 15:22:59 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 Checkline TI-25LT Ultrasonic Thickness Gauge for Steel https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25lt-ultrasonic-thickness-gauge-for-steel-p-276.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=276 ]]>Price:Replaced by Checkline TI-25-LTX Checkline TI-25LT Ultrasonic Wall Thickness Gauge for measuring CARBON STEEL ONLY Range: 0.040 - 6.00 inches - 1.00 - 150.00 mm Resolution: 0.004" (0.01mm) Datalogging: NO Measuring Range in Steel 0.040 - 6.00 inches 1.00 - 150.0 mm The TI-25LT Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion - from only one side! Standard configuration: In its standard configuration, the TI-25LT Wall Thickness Gauge is factory set to MEASURE STEEL ONLY Optional configuration: As a “no cost” option, the TI-25LT Wall Thickness Gauge can be factory set to measure on stainless steel. Easy upgrade to full TI-25M Ultrasonic Thickness Gauge functionality (refer to separate data sheet). TI-25M Ultrasonic Thickness Gauges measure on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area. The minimum reading recorded during the "scan" is displayed. Upgrade to TI-25M Ultrasonic Thickness Gauges require factory installation of enhanced circuit board, new firmware andkeypad. Photo Gallery Features Resolution of 0.004 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally The TI-25LT Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040-6.00" (1.00-150.0 mm) Resolution .004" (0.01mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range .0787-.3937 in/µs (2000-10,000 m/sec) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Probe Wearface PEEK (Polyethylethylkytone) Cable 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 710 ounces (280g) Dimensions 2.5 x 4..5 x 1.25" (64 x 114 x 32mm) Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carryingcase Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads TI-25LT Ultrasonic Thickness Gauge for Steel -Certificate TI-25LT Ultrasonic Thickness Gauge for Steel - Data Sheet TI-25LT Ultrasonic Thickness Gauge for Steel - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25lt-ultrasonic-thickness-gauge-for-steel-p-276.html Mon, 26 Jun 2023 19:08:42 +0000 USD 276 Checkline 976 TI-25LT https://www.abqindustrial.net/store/images/products/TI-25LT.jpg Checkline TI-45NA Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-45na-ultrasonic-thickness-gauge-p-277.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=277 ]]>Checkline TI-45NA General Purpose Wall Thickness Gauge for measuring on a variety of materials Range: 0.040 - 8.00 inches- 1.00 - 200.00 mm Resolution:.001" (0.01mm) Datalogging: NO Detachable Probe: YES Measuring Range in Steel 0.040 - 8.00 inches 1.00 - 200.0 mm The Checkline TI-45NA Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The attractive, ergonomic housing design is extremely compact, lightweight and rugged. It fits comfortably in the palm of your hand and incorporates a back light that illuminates the LCD in poorly lit areas. Kit Contents Checkline TI-45NA Ultrasonic Thickness Gauge Wrist strap Probe Cable assembly 2 oz. bottle of coupling fluid Battery Instruction manual Hard plastic carrying Features TI-45NA includes new Pipe Mode for stable measurement on small diameter pipe (1" and larger) Resolution of 0.001" (0.01mm) Extremely small & lightweight operates from a single AA battery Switch-selectable units - inches or mm Built-in calibration test plate Quick display update with last reading retained on the display Display symbols alert user to poor coupling and low battery conditions TI-45N-HD includes slip-on, ergonomic rubber sleeve for improved grip and additional physical protection User Adjustment of Acoustic Velocity or selection 10 preset velocities Specifications Range in Steel 0.040 - 8.000" (1.0 - 200.0 mm) Resolution .001" (0.01 mm) Display 4½ - digit LCD display, 0.39" (10mm) high with push button illumination Velocity Range 1,000 - 12,000 m/sec, continuously adjustable Probe 5 MHz, .39" (10 mm) diameter without Centering Shell Cable 39" (1m) 2-wire, long cable with quick-disconnect connectors Minimum Pipe Size 1" nominal (27mm) steel pipe, wall thickness starting at 0.060" (1.50 mm) Temp. Limits Ambient: 25 to 125° F (-5 to 50° C) Material: -15 to 140° F (-10 to 60° C) Calibration Plate 0.200" (5.00mm) steel plate, built into the front of the housing Battery Type 1x AA battery Battery Life 200 hours Weight Gauge: 7 ounces (200 g) Size 5.2" x 2.7" x 1.1" (131 x 68 x 29 mm) Warranty Gauge: 1 years Probe: 90 days Accessories Included Fitted, hard-plastic carrying case, probe shell attachment, 2 oz. bottle of coupling fluid, 1 spare battery and operating instruction guide Measuring Limits Minimum Radius for Convex Surfaces 1" (27 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 3" (76.2 mm) Minimum Sample Diameter 0.5" (12.7 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data SB4 Steel Test Block without certification For convenient confirmation of thickness gauge calibration 5Z10NDT-M Spare / Replacement Probe for TI-40N 5mhz, 10mm Probe 39" Cable with 2 LEMO Connectors Downloads Checkline TI-45N Ultrasonic Thickness Gauge - Data Sheet Checkline TI-45N Ultrasonic Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-45na-ultrasonic-thickness-gauge-p-277.html Thu, 24 Feb 2022 20:24:49 +0000 USD 277 Checkline 986 TI-45N https://www.abqindustrial.net/store/images/products/TI-45N.jpg is a precision instrument that accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The attractive, ergonomic housing design is extremely compact, lightweight and rugged. The Checkline TI-45N Ultrasonic Thickness Gauge fits comfortably in the palm of your hand and incorporates a back light that illuminates the LCD in poorly lit areas. ]]> Checkline TI-25M Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-ultrasonic-thickness-gauge-p-278.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=278 ]]>Price:This product has been discontinued General purpose gauge measures a variety of materials Range: 0.025 - 6.00 inches - 0.60 - 150.00mm Resolution:0.001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.025 - 6.00 inches 0.60 - 150.0 mm The TI-25M Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The TI-25M Ultrasonic Thickness Gauge can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25M Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions Photo Gallery Features Resolution of 0.001 inch (0.01 mm) Large, back-lit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.025-6.00" (0.60-150.0 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Back-lit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 7.5 MHz, 0.25" Diameter (6.35 mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Special Purpose Models Model Description TI-25M-H High Temperature for surfaces up to 650° F or 343° C. Transducer is 0.5" 5.0 MHz, range .050" to 19.99" TI-25M-107 Cast Iron / Plastics TI-25M-HW Heavy Wall (0.040-19.999") Complete Kit The TI-25M Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carryingcase Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Downloads Checkline TI-25M Ultrasonic Thickness Gauge -Certificate Checkline TI-25M Ultrasonic Thickness Gauge - Probe Zero TI-25M Ultrasonic Thickness Gauge - Instruction Manual TI-25M Ultrasonic Thickness Gauge - Calibration TI-25M Ultrasonic Thickness Gauge - Data Sheet Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-ultrasonic-thickness-gauge-p-278.html Mon, 26 Jun 2023 19:08:44 +0000 USD 278 Checkline 985 TI-25M https://www.abqindustrial.net/store/images/products/TI-25M.jpg Checkline TI-25DL Data Logging Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dl-data-logging-ultrasonic-thickness-gauge-p-279.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=279 ]]>Price:This product has been discontinued General purpose gauge measures a variety of materials with datalogging Range: 0.025 - 6.00 inches - 0.60 - 150.00mm Resolution: 0.001" (0.01 mm) Datalogging: YES Measuring Range in Steel 0.025 - 6.00 inches 0.60 - 150.0 mm The TI-25DL Data Logging Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! TI-25DL Data Logging Ultrasonic Thickness Gages incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the and the Differential mode. The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value Features Resolution of 0.001" (0.01 mm) Selectable units of inch or mm Large, backlit LCD display retains last reading RS-232C Serial output for downloading stored data to a printer or computer Memory for 1000 data points in up to 10 batches Special-purpose probes are offered for a variety of applications Windows compatible data transfer program supplied at no additional cost Includes NIST Calibration Certificate CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.025-6.00" (0.60-150.0 mm) Resolution .001" (0.01 mm) Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Display 4½ - Digit, 0.5" Backlit LCD Probe 7.5 MHz, 0.25" Diameter (6.35 mm) Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Serial Output RS-232C (8, N, 1, user-set baud rate) Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: --ll0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Special Purpose Models Model Description TI-25DL-H High Temperature for surfaces up to 650° F or 343° C TI-25DL-107 Cast Iron / Plastics TI-25DL-HW Heavy Wall (0.040-19.999") Complete Kit The TI-25DL Data Logging Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors P-25DL Portable Printer for TI-25DL Small, portable and easy to use Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge Downloads Checkline TI-25DL Data Logging UltrasonicThickness Gauge -Certificate Checkline TI-25DL Data Logging UltrasonicThickness Gauge -Software TI-25DL Data Logging UltrasonicThickness Gauge - Data Sheet TI-25DL Data Logging UltrasonicThickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dl-data-logging-ultrasonic-thickness-gauge-p-279.html Mon, 26 Jun 2023 19:08:39 +0000 USD 279 Checkline 994 TI-25DL https://www.abqindustrial.net/store/images/products/TI-25DL.jpg Checkline TI-25M-MMX Through Paint Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-mmx-through-paint-ultrasonic-thickness-gauge-p-280.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=280 ]]>This product has been discontinued Measures on coated materials and eliminates the coating from the measurement Range: Pulse-Echo Mode (Pit & Flaw Detection) 0.025 - 19.99 inches0.63 - 500 mm - Echo-Echo Mode (Through Paint & Coatings) 0.1 - 1 inch 2.54 - 25.4 mm Resolution: 0.001" (0.01 mm) Datalogging: NO Measuring Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! TI-25M-MMX Through Paint Ultrasonic Thickness Gauges can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Photo Gallery Features Ability to measure through paint and eliminate coatings Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second) Probe 5 MHz, 0.25" Diameter (6.35 mm) Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Model Selection Guide Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode Model Number Maximum Coating Minimum Wall Maximum Wall All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm) Selection Guide - Thru-Paint (Echo-Echo) Model Model Number Maximum Coating Minimum Wall Maximum Wall TI-25M-MMX 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm) TI-25M-MMX-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm) Complete Kit The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Checkline TI-25M-MMX Through Paint Ultrasonic Thickness Gauge -Certificate Checkline TI-25M-MMX Through Paint Ultrasonic Thickness Gauge - Data Sheet Checkline TI-25M-MMX Through Paint Ultrasonic Thickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-mmx-through-paint-ultrasonic-thickness-gauge-p-280.html Mon, 26 Jun 2023 19:08:45 +0000 USD 280 Checkline 985 TI-25M-MMX https://www.abqindustrial.net/store/images/products/TI-25M-MMX.jpg The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge is a precision instrument that accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! TI-25M-MMX Through Paint UltrasonicThickness Gauges can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25M-MMX Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case

]]> Checkline TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dl-mmx-data-logging-through-paint-ultrasonic-thickness-p-281.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=281 ]]>This product has been discontinued Measures on coated materials and eliminates the coating from the measurement with datalogging Range: Pulse-Echo Mode (Pit & Flaw Detection) 0.025 - 19.999 inches0.63 - 500 mm - Echo-Echo Mode (Through Paint & Coatings) 0.1 - 1 inch 2.54 - 25.4 mm Resolution: .001" (0.01 mm) Datalogging: YES Measuring Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Photo Gallery Features Ability to measure through paint and eliminate coatings Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training RS-232C Serial output for downloading stored data to a printer or computer Memory for 1000 data points in up to 10 batches Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second) Probe 5 MHz, 0.25" Diameter (6.35 mm) Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25"(64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Model Selection Guide Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode Model Number Maximum Coating Minimum Wall Maximum Wall All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm) Selection Guide - Thru-Paint (Echo-Echo) Model Model Number Maximum Coating Minimum Wall Maximum Wall TI-25M-MMX 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm) TI-25M-MMX-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm) Complete Kit The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Checkline TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness - Certificate Checkline TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness - Software Checkline TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness- Instruction Manual Checkline TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness - Data Sheet Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dl-mmx-data-logging-through-paint-ultrasonic-thickness-p-281.html Mon, 26 Jun 2023 19:08:41 +0000 USD 281 Checkline 1000 TI-25DL-MMX https://www.abqindustrial.net/store/images/products/TI-25DL-MMX.jpg The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge is a precision instrument that accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.The TI-25DL-MMX Data Logging Through Paint Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

]]> Checkline TI-007 Precision Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007-precision-ultrasonic-thickness-gauge-p-282.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=282 ]]>Price:Replaced by TI-007X High Resolution gauge for measuring thin materials with 0.0001" resolution Range: 0.0060 - 1.000 inches - 0.15 - 25.4 mm Resolution: 0.001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.0060 - 1.000 inches 0.150 - 25.40 mm The TI-007 Precision Ultrasonic Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. The TI-007 Precision Ultrasonic Wall Thickness Gauge is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics. Photo Gallery Features Resolution of 0.0001 inch (0.001 mm) Large, backlit LCD display retains last reading TI-007-GT model available with Graphite Tip for measuring plastics Selectable units of inch or mm RS-232 Data output of individual values for connection to data collection or quality control systems CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Specifications Range in Steel 0.0060-1.0000" (0.15-25.40 mm) Resolution .0001" (0.001 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (1250-10000 m/sec.) Transducer Single element with delay tip. 10 to 22 MHz frequency range. Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) Outputs RS-232, single value when send key is pressed Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Battery Type Two AA batteries Battery Life 150 hours Weight 10 ounces Size 2.5 x 4.5 x 1.25"(64 x 114 x 32 mm) Warranty Gauge: 5 Years Probes: 90 Days Delay Line Tips for TI-007 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) Standard on "-GT" models X-532-0000 3/16" x 3/8" Conical Tip for all metals (Cone) Optional X-533-0000 3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone) Optional Complete Kit The TI-007 Precision Ultrasonic Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle Downloads Checkline TI-007 Precision Ultrasonic Thickness Gauge - Certificate Checkline TI-007 Precision Ultrasonic Thickness Gauge - Instruction Manual Checkline TI-007 Precision Ultrasonic Thickness Gauge - Data Sheet Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007-precision-ultrasonic-thickness-gauge-p-282.html Mon, 26 Jun 2023 19:08:37 +0000 USD 282 Checkline 999 TI-007 https://www.abqindustrial.net/store/images/products/TI-007.jpg The TI-007 Precision Ultrasonic Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. The TI-007 Precision Ultrasonic Wall Thickness Gauge is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

]]> Checkline TI-007DL Data Logging Precision Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dl-data-logging-precision-ultrasonic-thickness-gauge-p-283.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=283 ]]>Price:Replaced by TI-007X High Resolution gauge for measuring thin materials with 0.0001" resolution with datalogging Range: 0.0060 - 1.000 inches - 0.15 - 25.4 mm Resolution:.0001" (0.001 mm) Datalogging: YES Measuring Range in Steel 0.0060 - 1.000 inches 0.150 - 25.40 mm The TI-007DL Data Logging Precision Ultrasonic Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. The TI-007DL Data Logging Precision Ultrasonic Thickness Gauge is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. TI-007DL Data Logging Precision Ultrasonic Thickness Gauges incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics. Photo Gallery Features Resolution of 0.0001 inch (0.001 mm) Selectable units of inch or mm Memory for 1000 data points in up to 10 batches RS-232C Serial output for downloading stored data to a printer or computer TI-007DL-GT model available with Graphite Tip for measuring plastics Windows compatible data transfer program supplied at no additional cost Large, backlit LCD display retains last reading CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Specifications Range in Steel 0.0060-1.0000" (0.15-25.40 mm) Resolution .0001" (0.001 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Transducer Single element with delay tip. 10 to 22 MHz frequency range. Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) Serial Output RS-232C (8, N, 1, user-set baud rate) Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Delay Line Tips for TI-007 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) Standard on "-GT" models X-532-0000 3/16" x 3/8" Conical Tip for all metals (Cone) Optional X-533-0000 3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone) Optional Complete Kit The TI-007DL Data Logging Precision Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle Downloads Checkline TI-007DL Data Logging Precision Ultrasonic Thickness Gauge - Certificate TI-007DL Data Logging Precision Ultrasonic Thickness Gauge - Software Checkline TI-007DL Data Logging Precision Ultrasonic Thickness Gauge - Data Sheet Checkline TI-007DL Data Logging Precision Ultrasonic Thickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dl-data-logging-precision-ultrasonic-thickness-gauge-p-283.html Mon, 26 Jun 2023 19:08:37 +0000 USD 283 Checkline 995 TI-007DL https://www.abqindustrial.net/store/images/products/TI-007DL.jpg The TI-007DL Data Logging Precision Ultrasonic Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. The TI-007DL Data Logging Precision Ultrasonic Thickness Gauge is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. TI-007DL Data Logging Precision Ultrasonic Thickness Gauges incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

]]> Checkline TI-CMX Ultrasonic Coating and Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmx-ultrasonic-coating-and-wall-thickness-gauge-p-284.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=284 ]]>Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge Range: 0.025 - 9.999 inches | 0.63 - 254.0 mm Resolution: 0.001" (0.01 mm) Datalogging: NO The Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge measures both coating and wall thickness quickly and accurately - from only one side. In addition, when switched to Pulse-Echo mode, the Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting - without removing the coating. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included: Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only: Measures coating thickness only Kit Contents Checkline TI-CMX Ultrasonic Coating and Wall Thickness Gauge Probe 4 oz. Bottle of coupling fluid 2 AA batteries NIST Calibration Certificate RS-232 cable Software Operating Manual Carrying Case Features Auto probe recognition with Auto Zero or Manual Zero. Wide variety of dual-element probes can be used for nearly any application. Bar graph with user-set start end values providing highest resolution around the target thickness value. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. Includes NIST-Traceable Calibration. CE Certified. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Display Hi/Lo Alarm Limits with audible and visual indicators. 2 Year Warranty Metal housing provides strong protection against harsh environments. Measures Coatings up to 0.100" Specifications Range in Steel Pulse-Echo Mode Pit and Flaw detection measures from 0.025 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode Thru Paint & coatings measures from 0.100 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness of the coating. Max Coating 0.100" Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units Inch or mm Measurement Modes Pulse-Echo (corrosion mode) Pulse-Echo Coating (Corrosion w/o coating) Echo-Echo (thru-paint) Temp Comp (auto adjust for material temp) Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMX None TI-CMXDL over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan Mode Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off. B-Scan Mode The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left. Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge - Certificate Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge - Software Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge - Data Sheet Checkline TI-CMX Ultrasonic Coating & Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmx-ultrasonic-coating-and-wall-thickness-gauge-p-284.html Thu, 24 Feb 2022 20:24:50 +0000 USD 284 Checkline 992 TI-CMX https://www.abqindustrial.net/store/images/products/TI-CMX-ultrasonic-thickness-gauge.jpg Checkline TI-CMXDL Data-Logging Ultrasonic Coating and Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmxdl-data-logging-ultrasonic-coating-and-wall-thickness-gauge-p-285.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=285 ]]>Checkline TI-CMXDL Ultrasonic Coating & Wall Thickness Gauge with datalogging Range: 0.025 - 9.999 inches- 0.63 - 254.0 mm Resolution:.001" (0.01 mm) Datalogging: YES The Checkline TI-CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge measures both coating and wall thickness quickly and accurately - from only one side. In addition, when switched to Pulse-Echo mode, the Checkline TI-CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting - without removing the coating. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included: Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only: Measures coating thickness only. Kit Contents Checkline TI-CMXDL Data-Logging Ultrasonic Coating and Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate RS-232 cable Data-transfer software Operating manual Carrying case Features Special Built-in memory with RS-232 output for transferring data to a Printer or PC Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column Each "grid type" File can be set for up to 999 rows by 52 columns Each "sequential" File can be set for up to 512 rows by 1 column Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan Features Auto probe recognition with Auto Zero or Manual Zero. Wide variety of dual-element probes can be used for nearly any application. Bar graph with user-set start end values providing highest resolution around the target thickness value. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. Includes NIST-Traceable Calibration. CE Certified. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Display Hi/Lo Alarm Limits with audible and visual indicators. 2 Year Warranty Metal housing provides strong protection against harsh environments. Measures Coatings up to 0.100" Specifications Range in Steel Pulse-Echo Mode Pit and Flaw detection measures from 0.025 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode Thru Paint & coatings measures from 0.100 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness of the coating. Max Coating 0.100" Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units Inch or mm Measurement Modes Pulse-Echo (corrosion mode) Pulse-Echo Coating (Corrosion w/o coating) Echo-Echo (thru-paint) Temp Comp (auto adjust for material temp) Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMX None TI-CMXDL over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan Mode Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off B-Scan Mode The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Checkline TI-CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge - Certificate Checkline TI-CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge - Software Checkline TI-CMXDL Data-Logging Ultrasonic Coating & Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmxdl-data-logging-ultrasonic-coating-and-wall-thickness-gauge-p-285.html Thu, 24 Feb 2022 20:24:50 +0000 USD 285 Checkline 994 TI-CMXDL https://www.abqindustrial.net/store/images/products/Checkline_TI-CMX-500x500.jpg Checkline TI-CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmxdlp-data-logging-ultrasonic-coating-and-wall-thickness-gauge-p-286.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=286 ]]>Checkline TI-CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm Resolution:.001" (0.01 mm) Datalogging: YES The Checkline TI-CMXDLP Data-Logging Ultrasonic Coating & Wall Thickness Gauge is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Checkline TI-CMXDLP Data-Logging Ultrasonic Coating & Wall Thickness Gauge automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating. The TI-CMXDLP Data-Logging Ultrasonic Coating & Wall Thickness Gauge features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The TI-CMXDLP Data-Logging Ultrasonic Coating & Wall Thickness Gauge also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included: Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only: Measures coating thickness only. Kit Contents Checkline TI-CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate RS-232 cable Data-transfer software Operating manual Carrying case Features Special Built-in memory with RS-232 output for transferring data to a Printer or PC Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column Each "grid type" File can be set for up to 999 rows by 52 columns Each "sequential" File can be set for up to 512 rows by 1 column Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan Features Auto probe recognition with Auto Zero or Manual Zero. Wide variety of dual-element probes can be used for nearly any application. Bar graph with user-set start end values providing highest resolution around the target thickness value. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. Includes NIST-Traceable Calibration. CE Certified. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Display Hi/Lo Alarm Limits with audible and visual indicators. 2 Year Warranty Metal housing provides strong protection against harsh environments. Measures Coatings up to 0.100" Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness of the coating. Max Coating 0.100" Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units Inch or mm Measurement Modes Pulse-Echo (corrosion mode) Pulse-Echo Coating (Corrosion w/o coating) Echo-Echo (thru-paint) Temp Comp (auto adjust for material temp) Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMX: None TI-CMXDL: over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan Mode Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off B-Scan Mode The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TICC-MVX Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Includes wrist & shoulder straps Downloads ChecklineTI-CMXDLP Data-Logging Ultrasonic Coating & Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-cmxdlp-data-logging-ultrasonic-coating-and-wall-thickness-gauge-p-286.html Thu, 24 Feb 2022 20:25:57 +0000 USD 286 Checkline 1000 TI-CMXDLP https://www.abqindustrial.net/store/images/products/ti-cmxdlp.jpg Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display with T-102-2700 Probe https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-mvx-ultrasonic-thickness-gauge-with-enhanced-display-with-t-102-2700-probe-p-287.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=287 ]]>Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display with T-102-2700 Probe Enhanced graphic scope Displays A Scan & B Scan for a cross section view Range: 0.025 - 9.999" - 0.63 - 254.0 mm Probe Sold Separately Resolution:.001" (0.01 mm) Datalogging: YES The Checkline TI-MVX Ultrasonic Thickness Gauge with Enhanced Display offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures. The Checkline TI-MVX TI-MVX Ultrasonic Thickness Gauge with Enhanced Display features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate. Kit Contents Checkline TI-MVX Ultrasonic Thickness Gauge With Enhanced Display 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate Data Transfer Software Serial Output Carrying case Instruction Manual Probe Sold Separately Features The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode. The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built in hardware AGC gain control for through paint measurements in multi mode operation. The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location. CE Certified Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated. Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view. MVX also comes complete with our Windows® PC software for transferring data to and from a PC. Includes Flaw Inspection - Prove Up Mode, (special probe required) The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned. Includes NIST Calibration Certificate Specifications Range in Steel* Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches). Range will vary +/- depending on the thickness of the coating. *Range varies by transducer, multiple transducers are required to cover entire range Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units English & Metric Measurement Modes Pulse-Echo (flaws, pits) Echo-Echo (thru-paint) Transducer Types Dual Element (1 to 10 MHz). Memory 16 megabit non-volatile ram Memory capacity 12,000 pages with 1 reading and waveform per page Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off if idle 5 min Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weigth, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TICC-MVX Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Includes wrist & shoulder straps Downloads TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Certificate TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Software TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Instruction Manual TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-mvx-ultrasonic-thickness-gauge-with-enhanced-display-with-t-102-2700-probe-p-287.html Wed, 02 Mar 2022 23:42:25 +0000 USD 287 Checkline 999 TI-MVX https://www.abqindustrial.net/store/images/products/TI-MVX-without-probe.jpg Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-mmx-sdl-high-performance-ultrasonic-thickness-gauge-p-288.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=288 ]]>Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge Enhanced Data Logging with time based B Scan for a cross section view Range: 0.025 - 9.999" - 0.60 - 254.0 mm Probe Sold Separately Resolution:.001" (0.01 mm) Datalogging: YES The Checkline TI-MMX-SDL High Performance Data-Logging Thickness Gauge is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The Checkline TI-MMX-SDL High Performance Data-Logging Thickness Gauge features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. Kit Contents Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Data Transfer Software Carrying case Instruction Manual TRANSDUCER SOLD SEPERATELY Features The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built in hardware AGC gain control for through paint measurements in multi mode operation. The TI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location. CE Certified Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated. TheTI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge also comes complete with our Windows® PC software for transferring data to and from a PC. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned. Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view. Includes NIST Calibration Certificate 2 Year Warranty Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thickness of the coating. Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units English & Metric Measurement Modes Pulse-Echo (flaws, pits) Echo-Echo (thru-paint) Transducer Types Dual Element (1 to 10 MHz). Memory 16 megabit non-volatile ram Memory capacity 12,000 pages with 1 reading and waveform per page Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off if idle 5 min Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-MVX Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Includes wrist & shoulder straps V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge - Instruction Manual Checkline TI-MMX-SDL High Performance Ultrasonic Thickness Gauge -Certificate Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-mmx-sdl-high-performance-ultrasonic-thickness-gauge-p-288.html Thu, 09 May 2024 20:47:45 +0000 USD 288 Checkline 999 TI-MMX-SDL https://www.abqindustrial.net/store/images/products/TI-MMX-SDL.jpg Checkline TI-PVX Precision Ultrasonic A-scan Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-pvx-precision-ultrasonic-a-scan-thickness-gauge-p-290.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=290 ]]>Checkline TI-PVX Precision Ultrasonic A-scan Thickness Gauge High Precision gauge ideal for applications with minimum access or contact areas. Enhanced graphic scope Displays A Scan & B Scan for a cross section view Resolution: 0.0001" (0.001 mm) Datalogging: YES The Checkline TI-PVX Precision Ultrasonic A-scan Thickness gauge provides the flexibility necessary for both high resolution and penetration requirements. The Checkline TI-PVX Precision Ultrasonic A-scan Thickness gauge's ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications) makes it the perfect flexibel tool for very precise and delicate measurements. The adjustable resolution settings add to the PVX’s flexibilty. The selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +/- Rectified waveform, and Large Digits with Scan Bar. The time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned. Kit Contents Checkline TI-PVX Precision Ultrasonic A-Scan Thickness Gauge 3/16" 10Mhz transducer 4 oz. bottle of coupling fluid 2 AA batteries NIST Calibration Certificate Data Transfer Software Serial Output Carrying case Instruction Manual Features Hardware AGC gain control for multiple echo and thru-paint measurement. Multiple calibration options: One Point, Two Point, or selection from a Material List. 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications. The TI-PVX Precision Ultrasonic A-scan Thickness gauge is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. The high speed scan feature Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. CE Certified 2 year limited warranty The TI-PVX Precision Ultrasonic A-scan Thickness gauge comes complete with our Windows® PC software for transferring data to and from a PC. User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units Visual and audible alarm with hi and lo limit settings for specific application tolerances. 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe Includes NIST traceable calibration certificate Specifications Range in Steel Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm). Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm). Pulse-Echo Contact Mode: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in (.254mm). Echo-Echo Contact mode: Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm). Resolution (selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm). Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units English & Metric Memory 16 megabit non-volatile ram. Data Logger 12,000 readings and waveforms (alpha numeric storage). Display 1/8 in. VGA grayscale display Setups 16 factory and 48 user-defined setups. Display Views A-Scan Rectified +/- (half wave view) RF (full waveform view) B-Scan Time based cross section view. Display speed of 15 secs per screen. Large Digits Standard thickness view. Digit Height: 0.400 in (10mm). Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views. Repeatability Bar Graph Bar graph indicates stability of reading. Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Power off Auto power off if idle 5 min. Operating Temperature -14° to 140°F (-10° to 60°C). Size 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm). Weight 0.4 kg (0.9 lbs ) Warranty Gauge: 2 Years Probe: 90 Days Optional Accessories TICC-MVX Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Includes wrist & shoulder straps F-000-7000 V-Block Probe Holder The F-000-7000 V-Block Probe Holder Pencil Probe transducer holder provides enhanced control when measuring small circular items and other curved surfaces. It can also be used on flat surfaces for better repeatability and quick perpendicular placing of the probe to achieve quick and easy repeatable measuring results Downloads TI-PVX Precision Ultrasonic A-scan Thickness Gauge - Certificate TI-PVX Precision Ultrasonic A-scan Thickness Gauge - Data Sheet TI-PVX Precision Ultrasonic A-scan Thickness Gauge - Software Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-pvx-precision-ultrasonic-a-scan-thickness-gauge-p-290.html Wed, 31 May 2023 15:03:59 +0000 USD 290 Checkline 994 TI-PVX https://www.abqindustrial.net/store/images/products/ti-pvxprecision-ultrasonic-thicknessgauges.jpg Checkline TI-25M-UWM Underwater Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-uwm-underwater-ultrasonic-thickness-gauge-p-291.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=291 ]]>Underwater enclosure allows operation at depths to 300 feet Range: 0.050 - 19.99 inches - 1.27 - 508.0 mm Resolution: 0.001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.050 - 19.99 inches 1.27 - 508.0 mm The TI-25M-UWM Underwater Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals at depths of up to 300 feet (91.44 m). TI-25M-UWM Underwater Wall Thickness Gages can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. Photo Gallery Features Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications 300 feet depth rating Clear plexiglass construction, Stainless steel connectors, latches, and control bar Switch-selected units for inches or mm CE Certified NEW Elastic wrist strap secures the gauge during dives Specifications Range in Steel 0.050-19.99" (1.27 - 508.0 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 5 MHz, 0.5" Diameter Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 2.8 pounds Size 3.5 x 7.5 x 2.75" (63.5 W x 190.5 H x 69.85 D mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probe: 90 Days Enclosure: 1 year Complete Kit TI-25M-UWM Underwater Ultrasonic Thickness Gages are supplied as a complete kit including gauge, underwater enclosure, underwater transducer, coupling fluid, instruction manual and calibration certificate in a foam lined hard plastic carrying case. Related Products TI-25M Ultrasonic Thickness Gages Resolution of 0.001 inch (0.01 mm) Simple operator controls virtually eliminate training TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Downloads Checkline TI-25M-UWM Underwater Ultrasonic Thickness Gauge -Certificate Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25m-uwm-underwater-ultrasonic-thickness-gauge-p-291.html Mon, 26 Jun 2023 19:08:46 +0000 USD 291 Checkline 1000 TI-25M-UWM https://www.abqindustrial.net/store/images/products/TI-25M-UWM.jpg The TI-25M-UWM Underwater Ultrasonic Thickness Gauge is a precision instrument that accurately measures wall thickness and the extent of corrosion of all metals at depths of up to 300 feet (91.44 m). TI-25M-UWM Underwater Wall Thickness Gages can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

]]> Checkline TI-1071 Intrinsically Safe Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-1071-intrinsically-safe-thickness-gauge-p-292.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=292 ]]> Discontinued Without Replacement Intrinsically safe Gauge for measuring thickness in hazardous areas Range:0.060 - 10.00 inches1.50 - 250.00 mm Resolution: .001" (0.01 mm) Datalogging: NO TI-1071 Intrinsically Safe Ultrasonic Thickness GaugeMeasuring Range in SteelTI-1071: 0.048 - 10.00 inches (1.2 - 250.0 mm)TI-1071-TW: 0.030 - 1.000 inch (0.7 - 25.0 mm)TI-1071-HW: 0.160 - 16.00 inches (5.0 - 400.0 mm)The TI-1071 Intrinsically Safe Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! Features of the TI-1071 Intrinsically Safe Ultrasonic Thickness Gauges Limit value guides and monitoring Adjustable sensitivity Includes protective vinyl pouch with clear plastic window for safe use in rugged environments. Energy saving mode Accuracy ± 0.0019" (0.05 mm) Class I Zone 0 AEx ia IIC T4I.S. Class I Divison 1 Group A-D T4 Optional Accessories for the TI-1071 Intrinsically Safe Ultrasonic Thickness Gauges NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data_ Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration_CF12Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle Complete Kit of the TI-1071 Intrinsically Safe Ultrasonic Wall Thickness Gauges TI-1071 Intrinsically Safe Ultrasonic Wall Thickness Gages are supplied as a complete kit including the Gauge, transducer, protective pouch, coupling fluid and instruction manual all in a foam fitted carrying case. Related Products for the TI-1071 Intrinsically Safe Ultrasonic Thickness Gauges Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Specifications of the TI-1071 Intrinsically Safe Ultrasonic Thickness Gauge Ex designation:II 2 (1) G EEx ia IIC T4 EC-Certificate of Conformity:PTB 97 ATEX 2231 X fm-approved:Class I Zone 0 AEx ia IIC T4I.S. Class I Divison 1 Group A-D T4 Ingress protection:IP 54 Accuracy± 0.0019" (0.05 mm) Dimensions:120 x 65 x 25 mm Weight:150 g Operating temperature:-10 °C to 50 °C Storage temperature:-20°C to 60°C (without batteries) Supply:2 x primary cells AA to IEC LR6 Working time:200 hours continuous operation 1-2 years stand-by Instrument:operation permitted in zone 1 Probes:operation permitted in zone O can be exchanged in hazardous areas standard sensor operating temperature up to 200°C for a short time Couplant:perfect connection between sensor and material Vulcollan film:prevents wear of probe if it is used on rough surfaces Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-1071-intrinsically-safe-thickness-gauge-p-292.html Mon, 26 Jun 2023 19:08:38 +0000 USD 292 Checkline 1000 TI-1071 https://www.abqindustrial.net/store/images/products/WT/TI-1071/main_small.jpg The TI-1071 Intrinsically Safe Ultrasonic Wall Thickness Gauge is used to accurately measure wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! TI-1071 Intrinsically Safe Ultrasonic Wall Thickness Gages are supplied as a complete kit including the Gauge, transducer, protective vinyl pouch with clear plastic window for safe use in rugged environments., coupling fluid and instruction manual all in a foam fitted carrying case.

]]> Checkline TI-25P Programmable Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25p-programmable-ultrasonic-thickness-gauge-p-294.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=294 ]]>Price:This product has been discontinued Programmable Ultrasonic Wall Thickness Gauge Range: 0.040-6.000" - 1.00-150.0 mm - With supplied probe - Other probes available Resolution:.001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.040 - 6.000 inches 1.00 - 150.0 mm The TI-25P Programmable Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion from only one side! TI-25P Programmable Ultrasonic Wall Thickness Gages holds a single ultrasonic velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. Standard configuration: In its standard configuration, theTI-25P Programmable Ultrasonic Wall Thickness Gauge is factory set to measure steel. Optional configuration: When required the TI-25P Programmable Ultrasonic Wall Thickness Gauge can be programmed to measure any other single material instead of steel. In order to program the gauge for use on any other material then factory steel, a sample of the material to be measured is required or the exact sound velocity of the material must be known. Features Resolution of 0.001 inch (0.01 mm) The TI-25P Programmable Ultrasonic Wall Thickness Gauge probe is waterproof and can be submerged in water Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions For underwater surveying, probe cable lengths up to 15 meter are optionally Large, backlit LCD display retains last reading Comes complete with cable and software to transfer the velocity to the gauge Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040-6.000" (1.00-150.0 mm) with supplied probe. Other probes available. Resolution 0.01 millimeter (0.001 inch) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 1250 to 10,000 meters/sec (.0492 to .3937 in/µs) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 50° C (-20 to 120° F) Material: -20 to 100° C (0 to 200° F) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 280 g (710 ounces) Dimensions 64 x 114 x 32mm (2.5 x 4.5 x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Software Comes complete with cable and software to transfer the velocity to the gauge. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The TI-25P Programmable Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. For setting the ultrasonic velocity, a connection cable and software are supplied Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas. Downloads Checkline TI-25P Programmable Ultrasonic Thickness Gauge - Certificate Checkline TI-25P Programmable Ultrasonic Thickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25p-programmable-ultrasonic-thickness-gauge-p-294.html Mon, 26 Jun 2023 19:08:47 +0000 USD 294 Checkline 998 TI-25P https://www.abqindustrial.net/store/images/products/WT/TI-25P/main_small.jpg The TI-25P Programmable Ultrasonic Thickness Gauge is used to measure wall thickness and the extent of corrosion from only one side! TI-25P Programmable Ultrasonic Wall Thickness Gages holds a single ultrasonic velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. Range 0.040-6.000" (1.00-150.0 mm)
with supplied probe. Other probes available.

]]> Dakota Ultrasonics MX-1 Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-1-ultrasonic-thickness-gauge-p-297.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=297 ]]>Price:This product has been discontinued Perfect choice when only one material is being tested day after day Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm Resolution:.001" (0.01mm) Datalogging: NO The Dakota Ultrasonics MX-1 Ultrasonic Thickness Gauge will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn the MX-1 Ultrasonic Wall Thickness Gauge on and go to work. The tool's backlit display is easy to read, even in dim light conditions, and the unit operates for up to 200 hours on a single set of AA batteries. MX-1 Ultrasonic Thickness Gages come complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty Applications: Corrosion & Pitting Tube & Pipe Tanks Boilers Glass Variety of Applications Features Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions Measurements displayed in inches, inches/microsecond, millimeters, and meters/second Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units Four readings per second for single point measurements Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 0.150" (3.8 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Measuring Range 0.025 to 19.999 inches 0.63 to 199.99 millimeters Resolution 0.001 inch 0.01 millimeter Velocity Range .0492 to .3937 in/µs 1250 to 10,000 meters/sec Dimensions 2.5 W x 4.75 H x 1.25 D inches Range in Steel 0.040-6.000" (1.00-150.0 mm) with supplied probe. Other probes available. Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two 1.5V alkaline or 1.2V NiCad AA cells. Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad. Weight 10 ounces (283 g) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-1 Ultrasonic Wall Thickness Gaugeis supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carryingcase Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration SB4 Steel Test Block without certification For convenient confirmation of thickness gauge calibration CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-1-ultrasonic-thickness-gauge-p-297.html Mon, 26 Jun 2023 19:06:45 +0000 USD 297 Dakota Ultrasonics 983 MX-1 https://www.abqindustrial.net/store/images/products/MX-1-uktrasonic-thickness-gauges.jpg The MX-1 Ultrasonic Thickness Gauge is a precision instrument that will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn the MX-1 Ultrasonic Wall Thickness Gauge on and go to work.The tool's backlit display is easy to read, even in dim light conditions, and the unit operates for up to 200 hours on a single set of AA batteries. MX-1 Ultrasonic Thickness Gages come complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty. Perfect choice when only one material is being tested day after day. The MX-1 Ultrasonic Wall Thickness Gaugeis supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

]]> Dakota Ultrasonics MX-2 Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-2-ultrasonic-thickness-gauge-p-298.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=298 ]]>Price:This product has been discontinued More flexible for users that have a need to measure more than one material type Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm Resolution:.001" (0.01 mm) Datalogging: NO The Dakota Ultrasonics MX-2 Ultrasonic Thickness Gauge is ideal for the person that tests a few different materials regularly. The MX-2 Ultrasonic Wall Thickness Gauge contains 8 velocities of common materials and two velocities that the user can set using a simple sofware program. The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. MX-2 Ultrasonic Wall Thickness Gages come complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty. Velocity Settings The MX-2 Ultrasonic Thickness Gauge has 8 set velocities and 2 that are custom to the user's applications. The set velocities are as follows: Steel4340-(.233) Stainless Steel 303-( .223 ) Aluminum 2024 - ( .251 ) Cast Iron-(.179 ) Plexiglass-(.106 ) PVC - (.094) Polystyrene(.092) Polyurethane-(.070 ) Custom Custom Features Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions Measurements displayed in inches, inches/microsecond, millimeters, and meters/second Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units Four readings per second for single point measurements 8 pre-set velocities and 2 custom velocities Ability to change between velocities without the use of computer software Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Measuring Range 0.025 to 19.999 inches 0.63 to 199.99 millimeters Resolution 0.001 inch 0.01 millimeter Velocity Range .0492 to .3937 in/µs 1250 to 10,000 meters/sec Dimensions 2.5 W x 4.75 H x 1.25 D inches Range in Steel 0.025-6.00" (0.60-150.0 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two 1.5V alkaline or 1.2V NiCad AA cells. Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad. Weight 10 ounces (283 g) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-2 Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration SB4 Steel Test Block without certification For convenient confirmation of thickness gauge calibration CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-2-ultrasonic-thickness-gauge-p-298.html Mon, 26 Jun 2023 19:06:47 +0000 USD 298 Dakota Ultrasonics 993 MX-2 https://www.abqindustrial.net/store/images/products/MX-2-ulltrasonic-thickness-gauges.jpg The MX-2 Ultrasonic Thickness Gauge is ideal for the person that tests a few different materials regularly. The MX-2 Ultrasonic Wall Thickness Gauge contains 8 velocities of common materials and two velocities that the user can set using a simple sofware program.The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. MX-2 Ultrasonic Wall Thickness Gages come complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty. The MX-2 Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

]]> Dakota Ultrasonics MX-3 Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-3-ultrasonic-thickness-gauge-p-299.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=299 ]]>Price:This product has been discontinued General purpose gauge measures a variety of materials Range: 0.025 - 6.00 inches - 0.60 - 150.0 mm Resolution:.001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.040 - 6.00 inches 1.00 - 150.0 mm The Dakota Ultrasonics MX-3 UltrasonicThickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! MX-3 Ultrasonic Thickness Gages can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MX-3 Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Features Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 3" (76.2 mm) Minimum Sample Diameter 0.5" (12.7 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040-6.00" (1.00-150.0 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25"(64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-3 Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data SB4 Steel Test Block without certification For convenient confirmation of thickness gauge calibration CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Downloads Dakota Ultrasonics MX-3 UltrasonicThickness Gauge - Certificate Dakota Ultrasonics MX-3 UltrasonicThickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-3-ultrasonic-thickness-gauge-p-299.html Mon, 26 Jun 2023 19:06:48 +0000 USD 299 Dakota Ultrasonics 981 MX-3 https://www.abqindustrial.net/store/images/products/MX-3-ultrasonic-thickness-gauges.jpg The MX-3 Ultrasonic Thickness Gauge is ideal to measure wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! MX-3 Ultrasonic Thickness Gages can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MX-3 Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The MX-3 Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

]]> Dakota Ultrasonics MX-5 Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-5-ultrasonic-thickness-gauge-p-300.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=300 ]]>Price:This product has been discontinued Advanced Ultrasonic Gauge measures a variety of materials Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm Resolution:0.001" (0.01 mm) Alarm mode, Differential mode, high speed scanning, and data send Measuring Range in Steel 0.040 - 8.00 inches 1.00 - 199.0 mm The Dakota Ultrasonics MX-5 Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The MX-5 Ultrasonic Thickness Gauge can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MX-5 Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions Features Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm CE Certified For underwater surveying, probe cable lengths up to 50 feet are optionally Differential Mode Alarm Mode RS-232C Serial output for sending signle data points to a printer or computer Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040-8.00" (1.00-199.9 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-5 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-5-ultrasonic-thickness-gauge-p-300.html Mon, 26 Jun 2023 19:06:50 +0000 USD 300 Dakota Ultrasonics 999 MX-5 https://www.abqindustrial.net/store/images/products/MX-5-ultrasonic-thickness-gauges.jpg The MX-5 Ultrasonic Thickness Gauge is ideal to measure wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The MX-5 Ultrasonic Thickness Gauge can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MX-5 Ultrasonic Thickness Gauge probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The MX-5 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

]]> Dakota Ultrasonics MX-5DL Data-Logging Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-5dl-data-logging-ultrasonic-thickness-gauge-p-474.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=474 ]]>Price:This product has been discontinued Advanced Ultrasonic Gauge measures a variety of materials Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm Resolution:.001" (0.01 mm) Alarm mode, Differential mode, high speed scanning, and data send Measuring Range in Steel 0.040 - 8.00 inches 1.00 - 199.0 mm The Dakota Ultrasonics MX-5DL Data-Logging UltrasonicThickness Gauge is a simple to operate Ultrasonic Thickness Gauge with an internal data logger. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5 DL. MX-5DL Data-Logging Ultrasonic Thickness Gauge will automatically log your readings in numeric order (1 to 1000 readings). The gauge comes as a complete kit, ready to use, and is backed by our 5 year limited warranty. Features Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm CE Certified For underwater surveying, probe cable lengths up to 50 feet are optionally Differential Mode Alarm Mode RS232 output sends thickness readings to a printer, computer or other external storage device Automatic numeric Data Logging system 1 to 1000 readings Includes NIST Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040-8.00" (1.00-199.9 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-5DL Data-Logging Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataComm Software for Thickness Gauges CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-5dl-data-logging-ultrasonic-thickness-gauge-p-474.html Mon, 26 Jun 2023 19:06:52 +0000 USD 474 Dakota Ultrasonics 1000 MX-5DL https://www.abqindustrial.net/store/images/products/MX-5DL-ultrasonic-thickness-gauges.jpg The MX-5DL Data-Logging Ultrasonic Thickness Gauge is a simple to operate Ultrasonic Thickness Gauge with an internal data logger. It offers features that make your job easier. An Alarm mode, Differential mode, high speed scanning, and data send are the main features of the MX-5 DL. MX-5DL Data-Logging Ultrasonic Thickness Gauge will automatically log your readings in numeric order (1 to 1000 readings). The gauge comes as a complete kit, ready to use, and is backed by our 5 year limited warranty. The MX-5DL Data-Logging Ultrasonic Wall Thickness Gauge is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

]]> Checkline TI-25S Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25s-ultrasonic-thickness-gauge-p-623.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=623 ]]>Price:This product has been discontinued More flexible for users that have a need to measure more than one material type Range: 0.025 - 19.99 inches - 0.63 - 199.99 mm Resolution:0.001" (0.01 mm) Datalogging: NO The TI-25S Ultrasonic Thickness Gauge is ideal for the person that tests a few different materials regularly. The TI-25S Ultrasonic Thickness Gauge contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The TI-25S Ultrasonic Thickness Gauge comes complete, ready to use, and is protected by our 5 year limited warranty. Velocity Settings The TI-25S Ultrasonic Thickness Gauge has 8 preset velocities and 2 custom velocities allowing the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. Each time the "MATL Key" is pressed the velocity will toggle from one to the next in a circular pattern. The list of preset velocities are as follows: Aluminum 2024 (0.251 in/µs ) Stainless Steel 303(0.223 in/µs ) Steel4340 (0.233 in/µs) Cast Iron (0.179 in/µs ) Plexiglass (0.106 in/µs ) PVC (0.094 in/µs) Polystyrene (0.092 in/µs) Polyurethane (0.070 in/µs) Custom 1 Custom 2 Note: If the Custom 1 & 2 are needed, they are set using the PC software (free) & downloaded to gauge using the data cable (optional, p/n N-306-0010) Features Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions Measurements displayed in inches, inches/microsecond, millimeters, and meters/second Measures from 0.040 to 6.000 inches (1.00 to 150.0 millimeters) switch to select English or metric units Four readings per second for single point measurements 8 pre-set velocities and 2 custom velocities Ability to change between velocities without the use of computer software 10 User-Selected Material Types Each time the "Matl" key is pressed, the material type (calibration setting of the acoustic velocity) changes from one type to the other. The abbreviations, description and sequence is shown below. *Note: If the Custom 1 & 2 are needed, they are set using the PC software (free) & downloaded to gauge using the data cable (optional, p/n N-306-0010) Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Measuring Range 0.040 to 6.000 inches 1.00 to 150.0 millimeters depends on material and probe used Range in Steel 0.025-6.00" (0.60-150.0 mm) Resolution .001" (0.01 mm) Velocity Range .0492 to .3937 in/µs 1250 to 10,000 meters/sec Dimensions 2.5 W x 4.75 H x 1.25 D inches Display 4½ - Digit, 0.5" Backlit LCD Probe 1/4", 7.5 MHz, actual wearface is 3/8" (10 mm) Probe P/N: T-102-3300 Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two 1.5V alkaline or 1.2V NiCad AA cells. Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad. Weight 10 ounces (283 g) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case Optional Accessories NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas DataComm Software Free data acquisition software N-306-0010 Transfer Cable Downloads Checkline TI-25S Ultrasonic Thickness Gauge - Probe Zero Checkline TI-25S Ultrasonic Thickness Gauge - Data Sheet TI-25S Ultrasonic Thickness Gauge - Instruction Manual Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25s-ultrasonic-thickness-gauge-p-623.html Mon, 26 Jun 2023 19:08:49 +0000 USD 623 Checkline 985 TI-25S https://www.abqindustrial.net/store/images/products/TI-25S.jpg The TI-25S Ultrasonic Thickness Gauge is ideal for the person that tests a few different materials regularly. The TI-25S Ultrasonic Thickness Gauge contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program. The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The TI-25S Ultrasonic Thickness Gauge comes complete, ready to use, and is protected by our 5 year warranty.

]]> Checkline TI-UMX2 Underwater Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-umx2-underwater-ultrasonic-thickness-gauge-p-686.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=686 ]]>Checkline TI-UMX2 Underwater Ultrasonic Thickness Gauge with datalogging Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm Resolution: .001" (0.01 mm) Rated for dive depths up to 1000 ft (300 meters) Measuring Range in Steel 0.025 - 19.99 inches 0.63 - 508.0 mm The Checkline TI-UMX2 Underwater Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals at depths of up to 1000 feet (300 Meters). Also measures Coating Thickness. A back-lit LCD display and illuminated housing allow divers to easily read measurements in dark water. An over-sized control button and clever menu structure allows easy gauge setup and navigation through menus above or below water even when wearing thick gloves. The TI-UMX-2 can store up to 5000 readings including A-Scan Waveforms and settings for each individual measurement. There are 2 file structure options; sequential with auto identifier and alpha numeric grid (row/column) format. The UMX-2 can transfer data and configuration settings to a PC using our DataComm software. (Software and transfer cable included) Kit Contents TI-UMX2 Underwater Ultrasonic Thickness Gauge 4 oz. bottle of coupling fluid AA batteries NIST-Traceable Calibration Certificate Data transfer software Serial output cable with USB converter Spare gasket & lube kit including Operating Instruction Manual Carrying Case Features Housing is rated for dive depths up to 1000 ft (300 meters) with backlit display Resolution of 0.001" (0.01 mm) user-selected units of inch or mm Includes built-in datalogger for 5000 readings, settings and waveforms in sequential or "grid" (row/column) format Automatic probe recognition and auto zero Supplied with FREE NIST-Traceable Calibration Certificate Supplied with data transfer cable and FREE data analysis software Measure modes include: Pulse-Echo, Pulse-Echo w/ Coating, Echo-Echo and Triple Echo CE-certified with 3-Year Warranty Measures BOTH Wall and Coating Thickness Both Dual Element and Single Membrane Probes are offered Standard Probe supplied is 1/2"-5MHz HD-Coating, Underwater p/n T-074-2906 All settings for gauge and datalogging can be done via software if desired Specifications Range in Steel 0.025-19.99" (0.63 - 508.0 mm) Note: exact range depends on probe used Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe STANDARD: Underwater Type, 1/2"-5MHz Dual-Element HD-Coating Probe OPTIONAL: Underwater Type, 1/2"-3.5MHz Dual-Element HD-Coating Probe MEMBRANE: Inquire Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 2.8 pounds Size 3.5 x 7.5 x 2.75" | (63.5 W x 190.5 H x 69.85 D mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 3 Years Probe: 90 Days Operating Modes PE: Pulse-Echo PECT: Pulse-Echo Coating EE: Echo-Echo EEE: Triple Echo TCG Velocity Settings The TI-UMX2 has 8 preset velocities and 1 custom velocity allowing the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. The list of preset velocities are as follows Aluminum 2024 Stainless Steel 302 Steel4340 Iron Cast Iron PVC Polystyrene Polyurethane Custom 1 TI-UMX2 Menu Structure Use of single button and clever menu structure permits easy navigation through all settings when underwater *Highlighted fields indicate default settings. Downloads Checkline TI-UMX2 Underwater Ultrasonic Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-umx2-underwater-ultrasonic-thickness-gauge-p-686.html Thu, 24 Nov 2022 14:07:04 +0000 USD 686 Checkline 994 TI-UMX2 https://www.abqindustrial.net/store/images/products/TI-UMX2.jpg Dakota Ultrasonics MMX-6DL Data Logging Through Paint Ultrasonic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mmx-6dl-data-logging-through-paint-ultrasonic-thickness-gauge-p-778.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=778 ]]>Price:This product has been discontinued Range: Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Measuring Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). The new Dakota Ultrasonics MMX-6DL Data Logging Through Paint Ultrasonic Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The MMX-6DL can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MMX-6DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The MMX-6DL probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Features Ability to measure through paint and eliminate coatings Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training RS-232C Serial output for downloading stored data to a printer or computer Memory for 1000 data points in up to 10 batches Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST-Traceable Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) 0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second) Probe 5 MHz, 0.25" Diameter (6.35 mm) Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Serial Output RS-232C (8, N, 1, user-set baud rate) Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MMX-6DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataComm Software for Thickness Gauges CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mmx-6dl-data-logging-through-paint-ultrasonic-thickness-gauge-p-778.html Mon, 26 Jun 2023 19:06:44 +0000 USD 778 Dakota Ultrasonics 997 MMX-6DL https://www.abqindustrial.net/store/images/products/MMX-6DL.jpg all metals, ceramics, glass and most rigid plastics - from only one side!

The MMX-6DL can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The MMX-6DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The MMX-6DL probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field condition.
The MMX-6DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.
]]> Dakota Ultrasonics MMX-6 Through Paint Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mmx-6-through-paint-ultrasonic-wall-thickness-gauge-p-779.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=779 ]]>Price:This product has been discontinued Range: Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). - Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Measuring Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). The new MMX-6 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The MMX-6 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The MMX-6 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions Features Ability to measure through paint and eliminate coatings Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally CE Certified Includes NIST-Traceable Calibration Certificate Typical Applications Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Model Selection Guide Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode Model Number Maximum Coating Minimum Wall Maximum Wall All Models 0.020" (0.50mm) 0.100" (2.54mm) 6.000" (152.4mm) Selection Guide - Thru-Paint (Echo-Echo) Model Model Number Maximum Coating Minimum Wall Maximum Wall MMX-6 0.040" (1.00mm) 0.100" (2.54mm) 1.000" (25.4mm) MMX-6-EXT 0.080" (2.00mm) 0.200" (5.08mm) 5.000" (127.0mm) Specifications Range Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe) 0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second) Probe 5 MHz, 0.25" Diameter (6.35 mm) Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MMX-6 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataComm Software for Thickness Gauges CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Downloads Dakota Ultrasonics MMX-6 Through Paint Ultrasonic Wall Thickness Gauge - Instruction Manual Dakota Ultrasonics MMX-6 Through Paint Ultrasonic Wall Thickness Gauge - Certificate Dakota Ultrasonics MMX-6 Through Paint Ultrasonic Wall Thickness Gauge - Probe Zero Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mmx-6-through-paint-ultrasonic-wall-thickness-gauge-p-779.html Mon, 26 Jun 2023 19:06:44 +0000 USD 779 Dakota Ultrasonics 995 MMX-6 https://www.abqindustrial.net/store/images/products/MMX-6-ultrasonic-thickness-gauges.jpg all metals, ceramics, glass and most rigid plastics - from only one side!

The MMX-6 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The MMX-6 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
The MMX-6 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
]]> Dakota Ultrasonics MX1-DL (MMX-7) High Performance Data Logging Z-160-0003 / Z-160-0005 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx1-dl-mmx-7-high-performance-data-logging-z-160-0003-z-160-0005-p-853.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=853 ]]>Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm Dakota Ultrasonics MMX-7 High Performance Data Logging Wall Thickness Gauge Z-160-0003 with Enhanced Data Logging with time based B Scan for a cross section view Resolution: .001" (0.01 mm) Datalogging: YES The Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. Kit Contents Dakota Ultrasonics MX1-DL (MMX-7)High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 With T-102-2700 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Data Transfer Software Serial Output Carrying case Instruction Manual Features The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC. Built in hardware AGC gain control for through paint measurements in multi mode operation. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned. The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location. Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view. CE Certified Includes NIST-Traceable Calibration Certificate Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated. 2 Year Warranty Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms1250 to 9999 meters/sec Units English & Metric Measurement Modes - Pulse-Echo (flaws, pits)- Echo-Echo (thru-paint) Transducer Types Dual Element (1 to 10 MHz). Memory 16 megabit non-volatile ram Memory capacity 12,000 pages with 1 reading and waveform per page Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off if idle 5 min Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Downloads Dakota Ultrasonics MX1-DL (MMX-7) High Performance Data Logging Wall Thickness Gauge Z-160-0003 / Z-160-0005 - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx1-dl-mmx-7-high-performance-data-logging-z-160-0003-z-160-0005-p-853.html Tue, 04 Jun 2024 18:22:01 +0000 USD 853 Dakota Ultrasonics 998 MMX-7 https://www.abqindustrial.net/store/images/MMX-7.jpg Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx2-dl-mvx-ultrasonic-thickness-gauge-z-149-0004-z-149-0006-p-854.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=854 ]]>Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display with Enhanced graphic scope Displays A Scan & B Scan for a cross section view Resolution: .001" (0.01 mm) The Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures. The Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. It is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate. Kit Contents Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display With T-102-2700 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Data Transfer Software Serial Output Carrying case Instruction Manual Features The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode. The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built in hardware AGC gain control for through paint measurements in multi mode operation. The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location. CE Certified Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated. Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view. MVX also comes complete with our Windows® PC software for transferring data to and from a PC. Includes Flaw Inspection - Prove Up Mode, (special probe required) The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned. Includes NIST-Traceable Calibration Certificate Specifications Range in Steel* Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches).Range will vary +/- depending on the thickness of coating. Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms1250 to 9999 meters/sec Units English & Metric Measurement Modes - Pulse-Echo (flaws, pits)- Echo-Echo (thru-paint) Transducer Types Dual Element (1 to 10 MHz). Memory 16 megabit non-volatile ram Memory capacity 12,000 pages with 1 reading and waveform per page Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off if idle 5 min Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Operating Temperature -14° to 140°F (-10° to 60°C) Weigth, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards Display Views A-Scan Scan Mode The A-Scan rectified mode is the preferred display view for flaw and pit detection applications and measuring through paint and coatings in the echo-echo mode. B-Scan Mode The B-Scan view displays a time-based cross section of the test material. It is commonly used to display the profile of the blind or underside of a pipe or tank. Large Digits The Large Digits view provides a basic digital thickness gauge look and feel. The large display makes it easy for the operator to monitor the thickness readings. Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MVXProtective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Downloads Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display - Instruction Manual Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx2-dl-mvx-ultrasonic-thickness-gauge-z-149-0004-z-149-0006-p-854.html Tue, 04 Jun 2024 17:17:55 +0000 USD 854 Dakota Ultrasonics 993 MVX https://www.abqindustrial.net/store/images/MVX-ultrasonic-thickness-gauges.jpg Dakota Ultrasonics CMX1 (CMX) Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 / Z-170-0005 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx1-cmx-ultrasonic-coating-and-wall-thickness-gauge-z-170-0003-z-170-0005-p-855.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=855 ]]>Range: 0.025 - 9.999 inches - 0.60 - 254.0 mm Dakota Ultrasonics CMX1 (CMX) Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 / Z-170-0005 Resolution: .001" (0.01 mm) Datalogging: YES The Dakota Ultrasonics CMX1 (CMX) Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 / Z-170-0005measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Dakota Ultrasonics CMX1 (CMX) Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 / Z-170-0005automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included:Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating. Kit Contents Dakota Ultrasonics CMX1 (CMX) Ultrasonic Coating and Wall Thickness Gauge Z-170-0003 / Z-170-0005 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate RS-232 cable and software Operating manual Carrying case FeaturesHardware AGC gain control for multiple echo and thru-paint measurement. 2 year limited warranty Multiple calibration options: One Point, Two Point, or selection from a Material List. PVX comes complete with our Windows® PC software for transferring data to and from a PC. 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications. User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. Visual and audible alarm with hi and lo limit settings for specific application tolerances. The high speed scan feature 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. Includes NIST-Traceableb calibration certificate CE Certified Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick Range in Coating Only Mode 0.0005" - 0.1000" / Resolution: 0.0001"(0.013 - 2.540 mm / Resolution: 0.001 mm) Max Coating 0.100" (2.54mm) Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms1250 to 9999 meters/sec Units Inch or mm Measurement Modes - Pulse-Echo (corrosion mode)- Pulse-Echo Coating (Corrosion w/o coating)- Echo-Echo (thru-paint)- Temp Comp (auto adjust for material temp)- Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMX: NoneTI-CMXDL: over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° C)Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan ModeScan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off B-Scan ModeThe B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left Measuring Limits Minimum Radius for Convex Surfaces 1" (25.4 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 3" (76.2 mm) Minimum Sample Diameter 0.5" (12.7 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products NIST-Traceable Steel Test Block3 Sizes AvailablePrecision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic GaugesConstructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic GaugesFor convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - Instructio Manual Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx1-cmx-ultrasonic-coating-and-wall-thickness-gauge-z-170-0003-z-170-0005-p-855.html Tue, 04 Jun 2024 19:07:17 +0000 USD 855 Dakota Ultrasonics 993 CMX https://www.abqindustrial.net/store/images/CMX.jpg Dakota Ultrasonics CMX1-DL (CMXDL) Data-Logging Ultrasonic Coating Thickness Z-171-0003 / Z-171-0005 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx1-dl-cmxdl-data-logging-ultrasonic-coating-thickness-z-171-0003-z-171-0005-p-856.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=856 ]]>Dakota Ultrasonics CMX1-DL (CMXDL) Data-Logging Ultrasonic Coating Thickness Z-171-0003 / Z-171-0005 Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm Resolution: .001" (0.01 mm) Datalogging: YES The Dakota Ultrasonics CMX1-DL (CMXDL) Data-Logging Ultrasonic Coating Thickness Z-171-0003 / Z-171-0005 measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMXDL automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included:Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating Kit Contents Dakota Ultrasonics CMX1-DL (CMXDL) Data-Logging Ultrasonic Coating Thickness Z-171-0003 / Z-171-0005 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate RS-232 cable and data-transfer software Operating manual Carrying case Features SpecialBuilt-in memory with RS-232 output for transferring data to a Printer or PC Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column Each "grid type" File can be set for up to 999 rows by 52 columns Each "sequential" File can be set for up to 512 rows by 1 column Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan FeaturesAuto probe recognition with Auto Zero or Manual Zero. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). Wide variety of dual-element probes can be used for nearly any application. 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Bar graph with user-set start end values providing highest resolution around the target thickness value. Display Hi/Lo Alarm Limits with audible and visual indicators. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. 2 Year Warranty & CE-Certified Includes NIST-Traceable Calibration. Metal housing provides strong protection against harsh environments. TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered Measures Coatings up to 0.100" Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick Range in Coating Only Mode 0.0005" - 0.1000" / Resolution: 0.0001"(0.013 - 2.540 mm / Resolution: 0.001 mm) Max Coating 0.100" Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms1250 to 9999 meters/sec Units Inch or mm Measurement Modes - Pulse-Echo (corrosion mode)- Pulse-Echo Coating (Corrosion w/o coating)- Echo-Echo (thru-paint)- Temp Comp (auto adjust for material temp)- Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMX: NoneTI-CMXDL: over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off: After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° C)Special high temperature model TI-CMXDL-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan ModeScan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off B-Scan ModeThe B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products NIST-Traceable Steel Test Block3 Sizes AvailablePrecision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic GaugesConstructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic GaugesFor convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics CMX1-DL (CMXDL) Data-Logging Ultrasonic Coating Thickness Z-171-0003 / Z-171-0005 - Instruction Manual Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx1-dl-cmxdl-data-logging-ultrasonic-coating-thickness-z-171-0003-z-171-0005-p-856.html Tue, 04 Jun 2024 19:00:22 +0000 USD 856 Dakota Ultrasonics 1000 CMXDL https://www.abqindustrial.net/store/images/CMXDL.jpg Dakota Ultrasonics CMX2-DL (CMXDLP) Data-Logging Ultrasonic Coating Z-187-0003 / Z-172-0005 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx2-dl-cmxdlp-data-logging-ultrasonic-coating-z-187-0003-z-172-0005-p-857.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=857 ]]>Dakota Ultrasonics CMX2-DL (CMXDLP) Data-Logging Ultrasonic Coating and Wall Thickness Gauge Z-187-0003 / Z-172-0005 Range: 0.025 - 9.999 inches - 0.60 - 254.0 mm Resolution: .001" (0.01 mm) Datalogging: YES The new Dakota Ultrasonics CMX2-DL (CMXDLP) Data-Logging Ultrasonic Coating and Wall Thickness Gauge Z-187-0003 / Z-172-0005 is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Dakota Ultrasonics CMXDL+ automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating. It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The CMXDL+ also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). Five user-selected operating modes are included: Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness. Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only. Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature. Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included) Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating. Kit Contents Dakota Ultrasonics CMX2-DL (CMXDLP) Data-Logging Ultrasonic Coating and Wall Thickness Gauge Z-187-0003 / Z-172-0005 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate RS-232 cable and data-transfer software Operating manual Carrying case Features Special Built-in memory with RS-232 output for transferring data to a Printer or PC Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column Each "grid type" File can be set for up to 999 rows by 52 columns Each "sequential" File can be set for up to 512 rows by 1 column Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan Features Auto probe recognition with Auto Zero or Manual Zero. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). Wide variety of dual-element probes can be used for nearly any application. 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Bar graph with user-set start end values providing highest resolution around the target thickness value. Display Hi/Lo Alarm Limits with audible and visual indicators. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. 2 Year Warranty and CE-Certified Includes NIST-Traceable Calibration. Metal housing provides strong protection against harsh environments. T-8071-0868 Probe to 1"-1MHz Single-Element Membrane Probe to measure Blow Holes in Thick PE Pipes and Fittings Measures Coatings up to 0.100" Specifications Range in Steel Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick Range in Coating Only Mode 0.0005" - 0.1000" / Resolution: 0.0001"(0.013 - 2.540 mm / Resolution: 0.001 mm) Max Coating 0.100" Resolution .001 inches (0.01mm) Velocity Range .0492 to .3936 in./ms1250 to 9999 meters/sec Units Inch or mm Measurement Modes - Pulse-Echo (corrosion mode)- Pulse-Echo Coating (Corrosion w/o coating)- Echo-Echo (thru-paint)- Temp Comp (auto adjust for material temp)- Coating Only (Ultrasonic Coating Gauge) Transducer Types Dual Element (1 to 10 MHz). Output RS-232 for upload/download of setups Memory capacity TI-CMXDLP: over 200,000 measurements Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Auto Power off After 5 minutes of non-use Display 1/8 in. VGA grayscale display 62 x 45.7mm Keyboard Membrane switch with twelve tactile keys Case Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)Material: -0 to 200° F (-20 to 100° CSpecial high temperature probes are optionally available. Weight, net 383 grams Dimensions 63.5 W x 165 H x 31.5 D mm Warranty 2 year limited Certification CE Approved, Factory calibration traceable to national standards High Speed Scan Mode & B-Scan Mode Hi-Speed Scan ModeScan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off B-Scan ModeThe B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na TI-CMXDLP-C Color Model Oversized graphic color LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring). With ultra hi-speed processing (display update refresh of 120 times/second), TI-CMXDLP-C is also extremely effective tool when used in the Flaw “Prove-up” Mode, simulating the function of a Flaw Detector at a fraction of the cost to identify and locate cracks, dis-bonds, weld defects, etc. Also includes a “dampening feature” which helps filter the raw waveform data to clean-up the signal, especially with very low and very high frequency probes. Quick Change Shear Wave Transducers(QC) Description Threaded shear wave transducers for quickly interchanging between wedges. Ideal for limited access and curved surfaces. Used General weld inspection Damping High gain (G), Resolution(R) *Specify damping after (QC), No damping on 3.5 MHz Connectors Microdot Element Size 2.25 MHz 3.5 MHz 5.0 MHz 10.0 MHz .250" dia. QC 2525 - QC 2550 QC 2510 .375" dia. QC 3725 - QC 3750 QC 3710 .500" dia. QC 5025 PQC 5035 QC 5050 QC 5010 Quick Change Wedges Quick Change Wedges - Custom angles available on requ Element Size .250" DIA. .375" DIA. .500" DIA. 45° QW 2545 QW 3745 QW 5045 60° QW 2560 QW 3760 QW 5060 70° QW 2570 QW 3770 QW 5070 Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics CMX2-DL (CMXDLP) Data-Logging Ultrasonic Coating and Wall Thickness Gauge Z-187-0003 / Z-172-0005 - Instruction Manual Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cmx2-dl-cmxdlp-data-logging-ultrasonic-coating-z-187-0003-z-172-0005-p-857.html Tue, 04 Jun 2024 19:16:28 +0000 USD 857 Dakota Ultrasonics 998 CMXDLP https://www.abqindustrial.net/store/images/Dakota-Ultrasonics-CMXDLP.jpg Dakota Ultrasonics PX-7 Precision Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-px-7-precision-ultrasonic-wall-thickness-gauge-p-858.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=858 ]]>Price:This product has been discontinued Dakota PX-7 High Resolution Ultrasonic Thickness gauge Range: 0.0060 - 1.000 inches - 0.15 - 25.4 mm Resolution: .001" (0.01 mm) Datalogging: NO Measuring Range in Steel 0.0060 - 1.000 inches 0.150 - 25.40 mm The Dakota Ultrasonics PX-7 Precision Ultrasonic Wall Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics Features Resolution of 0.0001 inch (0.001 mm) RS-232 Data output of individual values for connection to data collection or quality control systems Large, backlit LCD display retains last reading CE Certified TI-007-GT model available with Graphite Tip for measuring plastics Includes NIST-Traceable Calibration Certificate Selectable units of inch or mm Delay Line Tips for PX-7 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) Standard on "-GT" models X-532-0000 3/16" x 3/8" Conical Tip for all metals (Cone) Optional X-132-0000 1/8" x 3/8" Conical Tip for all metals (Cone) Optional X-533-0000 3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone) Optional Specifications Range in Steel 0.0060-1.0000" (0.15-25.40 mm) Resolution .0001" (0.001 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10000 m/sec.) Transducer Single element with delay tip. 10 to 22 MHz frequency range. Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) Outputs RS-232, single value when send key is pressed Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Battery Type Two AA batteries Battery Life 150 hours Weight 10 ounces Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Warranty Gauge: 5 Years Probes: 90 Days Range in Steel 0.15-25.4 mm (0.0060-1.0000" ) Resolution .0001" (0.001 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 2000-10.000 m/sec. (6.500-33.000 ft./sec ) Transducer Single element with delay tip. 10 to 22 MHz frequency range. Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 30 m (100 ft ) Outputs RS-232, single value when send key is pressed Temp. Limits Ambient: -30 to 50° C ( -20 to 120° F) Material: -20 to 100° C (0 to 200° F) Battery Type Two AA batteries Battery Life 150 hours Weight 285 gr Size 64 x 114 x 32 mm (2.5 x 4.5 x 1.25") Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The PX-7 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-px-7-precision-ultrasonic-wall-thickness-gauge-p-858.html Mon, 26 Jun 2023 19:06:53 +0000 USD 858 Dakota Ultrasonics 999 PX-7 https://www.abqindustrial.net/store/images/PX-7.jpg The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics
]]> Dakota Ultrasonics PX-7DL Data Logging Precision Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-px-7dl-data-logging-precision-ultrasonic-wall-thickness-gauge-p-859.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=859 ]]>Price:This product has been discontinued Dakota PX-7DL High Resolution Ultrasonic Thickness gauge with Data Logging Range: 0.0060 - 1.000 inches - 0.15 - 25.4 mm Resolution: .0001" (0.001 mm) Datalogging: YES Measuring Range in Steel 0.0060 - 1.000 inches 0.150 - 25.40 mm The Dakota Ultrasonics PX-7DL Data Logging Precision Ultrasonic Wall Thickness Gauge is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The PX-7DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics Features Resolution of 0.0001 inch (0.001 mm) Windows compatible data transfer program supplied at no additional cost. Selectable units of inch or mm Large, backlit LCD display retains last reading Memory for 1000 data points in up to 10 batches CE Certified RS-232C Serial output for downloading stored data to a printer or computer Includes NIST-Traceable Calibration Certificate TI-007DL-GT model available with Graphite Tip for measuring plastics Delay Line Tips for PX-7 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) Standard on "-GT" models X-532-0000 3/16" x 3/8" Conical Tip for all metals (Cone) Optional X-533-0000 3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone) Optional Specifications Range in Steel 0.0060-1.0000" (0.15-25.40 mm) Resolution .0001" (0.001 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Transducer Single element with delay tip. 10 to 22 MHz frequency range. Probe Wearface PEEK (Polyethlethylketone) Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) Serial Output RS-232C (8, N, 1, user-set baud rate) Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Battery Type Two AA batteries Battery Life 150 hours Weight 7 ounces (300g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The PX-7DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-px-7dl-data-logging-precision-ultrasonic-wall-thickness-gauge-p-859.html Mon, 26 Jun 2023 19:06:54 +0000 USD 859 Dakota Ultrasonics 1000 PX-7DL https://www.abqindustrial.net/store/images/PX-7DL.jpg The PX-7DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

The PX-7DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The gauges have a Measuring Range from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics.

]]> Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pmx2-dl-pvx-precision-ultrasonic-a-scan-thickness-gauge-z-157-0004-z-157-0006-p-860.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=860 ]]>Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 ideal for applications with minimum access or contact areas. Enhanced graphic scope Displays A Scan & B Scan for a cross section view Resolution: 0.0001" (0.001 mm) Datalogging: YES The Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 provides the flexibility necessary for both high resolution and penetration requirements. It's ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications) makes it the perfect flexibel tool for very precise and delicate measurements. The adjustable resolution settings add to the PVX’s flexibilty. The selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +/- Rectified waveform, and Large Digits with Scan Bar. The time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned. Kit Contents Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 3/16" 10Mhz transducer 4 oz. bottle of coupling fluid NIST Traceable Calibration Certificate Data Transfer Software Serial Output 2 AA batteries Carrying case Instruction Manual Features Hardware AGC gain control for multiple echo and thru-paint measurement. 2 year limited warranty Multiple calibration options: One Point, Two Point, or selection from a Material List. PVX comes complete with our Windows® PC software for transferring data to and from a PC. 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications. User-selected resolution of 0.001" or 0.0001" inch units and 0.01 or 0.001 in mm units PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. Visual and audible alarm with hi and lo limit settings for specific application tolerances. The high speed scan feature 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. Includes NIST-Traceableb calibration certificate CE Certified Specifications Range in Steel Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm). Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm). Pulse-Echo Contact Mode: Steel .040in - 10.0in (1mm - 254mm). Plastics from .01 Resolution (selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm). Velocity Range .0492 to .3936 in./ms 1250 to 9999 meters/sec Units English & Metric Memory 16 megabit non-volatile ram. Data Logger 12,000 readings and waveforms (alpha numeric storage). Display 1/8 in. VGA grayscale display Setups 16 factory and 48 user-defined setups. Display Views A-Scan Rectified +/- (half wave view) RF (full waveform view) B-Scan Time based cross section view. Display speed of 15 secs per screen. Large Digits Standard thickness view. Digit Height: 0.400 in (10mm). Power Source Three 1.5V alkaline or 1.2V NiCad AA cells Battery Life Typically operates for 150 hours on alkaline and 100 hours on NiCad Power off Auto power off if idle 5 min. Operating Temperature -14° to 140°F (-10° to 60°C). Size 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm). Weight 0.4 kg (0.9 lbs ) Warranty Gauge: 2 Years Probe: 90 Days PVX - Delay Line P/N Description Standard / Optional Image X-152-0000 1/16” Dia. x .450" L Standard X-752-0000 1/8" Dia. x .450" L Optional TI-PVX-5507 - Delay Line P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) Standard on "-GT" models X-532-0000 3/16" x 3/8" Conical Tip for all metals (Cone) Optional X-132-0000 1/8" x 3/8" Conical Tip for all metals (Cone) Optional X-533-0000 3/16" x 3/8" Graphite Tip for thin plastics (Graphite Cone) Optional Related Products TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop F-000-7000V-Block Probe Holder The F-000-7000 V-Block Probe Holder Pencil Probe transducer holder provides enhanced control when measuring small circular items and other curved surfaces. It can also be used on flat surfaces for better repeatability and quick perpendicular placing of the probe to achieve quick and easy repeatable measuring results Downloads Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pmx2-dl-pvx-precision-ultrasonic-a-scan-thickness-gauge-z-157-0004-z-157-0006-p-860.html Tue, 04 Jun 2024 19:30:14 +0000 USD 860 Dakota Ultrasonics 994 PVX https://www.abqindustrial.net/store/images/PVX.jpg Dakota Ultrasonics VX Ultrasonic Velocity Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-vx-ultrasonic-velocity-gauge-p-861.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=861 ]]>Price:This product has been discontinued Dakota VX Ultrasonic Velocity Gauge Range:0.025 - 19.99 inches -0.63 - 500 mm Resolution: .001" (0.01 mm) Datalogging: NO The Dakota Ultrasonics VX Ultrasonic Velocity Gauge is a hand-held ultrasonic velocity gauge. When measuring materials such as casts, alloys, or plastics, the VX displays the speed of sound (velocity) through the material; thus giving an indication of its consistency. With the hand-held VX Ultrasonic Velocity gauge, you can determine material velocities by measuring a known thickness, entering a known thickness into the VX, and the material velocity will be displayed. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The VX gauge has 2 measuring modes: The Point-to-Point mode, which is simply placing the probe to the material and the gauge will display the velocity at that point. The Scan mode allows the operator to place the probe on the material and then move the probe along the surface; when the probe is lifted from the material, it will then display the fastest velocity the gauge found on the area covered Features Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Large, backlit LCD display retains last reading CE Certified Simple operator controls virtually eliminate training Includes NIST Calibration Certificate Typical Applications Specifications Measuring Range 0.025 to 19.999 inches (0.63 to 500 millimeters) Resolution 0.001 inch (0.01 millimeter) Velocity Range .0492 to .3937 in/m s (1250 to 10,000 meters/sec) Display Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions. Keypad Six tactile-feedback keys, sealed membrane that is resistant to both water and petroleum products. Housing Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed. Battery Two 1.5V alkaline or 1.2V NiCad AA cells Battery Life 200 hours alkaline, 130 hours NiCad Operating Temperature -20 to 120F (-20 to 50C) Weight 10 Ounces Dimensions 2.5" x 4.75" x 1.25" (63.5mm x 120.7mm x 31.8mm) Warranty 5 Years Related Products TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-vx-ultrasonic-velocity-gauge-p-861.html Mon, 26 Jun 2023 19:06:55 +0000 USD 861 Dakota Ultrasonics 1000 VX https://www.abqindustrial.net/store/images/VX.jpg With the hand-held VX Ultrasonic Velocity gauge, you can determine material velocities by measuring a known thickness, entering a known thickness into the VX, and the material velocity will be displayed. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

The VX gauge has 2 measuring modes: The Point-to-Point mode, which is simply placing the probe to the material and the gauge will display the velocity at that point. The Scan mode allows the operator to place the probe on the material and then move the probe along the surface; when the probe is lifted from the material, it will then display the fastest velocity the gauge found on the area covered. ]]> Dakota Ultrasonics MX-3-ATRR Acrylic Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-3-atrr-acrylic-thickness-gauge-p-862.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=862 ]]>Price:This product has been discontinued Dakota Ultrasonics MX-3-ATRR Acrylic Thickness Gauge Velocity Gauge Range:0.025 - 19.99 inches -0.63 - 500 mm Resolution: .001" (0.01 mm) Datalogging: NO Measuring Rangel ACRYLIC: 0.030-0.500" (0.75-12.50mm) STEEL: 0.040-6.00" (1.00-150.0 mm) The MX-3-ATRR Wall Thickness Gauge is specially designed to measure the thickness of acrylic from one side. The MX-3-ATRR can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Made in the USA and covered by a 5-Year warranty Features Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Large, backlit LCD display retains last reading Metal housing is environmentally sealed to provide trouble-free operation under the toughest field conditions Simple operator controls virtually eliminate training CE Certified, made in USA with 5-Year warranty Special-purpose probes are offered for a variety of applications Includes NIST Calibration Certificate Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range ACRYLIC: 0.030-0.500" (0.75-12.50mm) STEEL: 0.040-6.00" (1.00-150.0 mm) Resolution .001" (0.01 mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.) Probe 0.250" Diameter (6.35 mm), 5 MHz Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C Special high temperature probes are optionally available. Battery Type Two AA batteries Battery Life 200 hours Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm) Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days Complete Kit The MX-3-ATRR is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data Uncertified Steel Test Block For Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TICC-M Protective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop CF12 Coupling Fluid Used to create an ultrasonic coupling between the probe and material to be measured 12 oz Bottle V-Block Transducer Holder The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-mx-3-atrr-acrylic-thickness-gauge-p-862.html Mon, 26 Jun 2023 19:06:49 +0000 USD 862 Dakota Ultrasonics 1000 MX-3-ATRR https://www.abqindustrial.net/store/images/MX-3-ATRR.jpg
The MX-3-ATRR can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. Made in the USA and covered by a 5-Year warranty. ]]> Checkline TI-44NA Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-44na-ultrasonic-wall-thickness-gauge-p-863.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=863 ]]>Checkline TI-44NA Economical Wall Thickness gauge for measuring on a variety of materials Range: 0.040 - 8.00 inches - 1.00 - 200.00 mm Resolution:.001" (0.01 mm) Datalogging: NO Detachable Probe: NO Measuring Range in Steel 0.040 - 8.00 inches 1.00 - 200.0 mm The Checkline TI-44NA Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The attractive, ergonomic housing design is extremely compact, lightweight and rugged. It fits comfortably in the palm of your hand and incorporates a back light that illuminates the LCD in poorly lit areas. This product is similar to our TI-45NA, however the probe is hard-wired to the gauge and is NOT removable as in the TI-45N. Kit Contents Checkline TI-44NA Ultrasonic Wall Thickness Gauge Wrist strap Probe and cable assembly 2 oz. bottle of coupling fluid Battery Instruction manual Cardboard pack Features Resolution of 0.001" (0.01mm) with Switch-selectable units of inches or mm Quick display update with last reading retained on the display Extremely small & lightweight operating from a single AA battery Display symbols alert user to poor coupling and low battery conditions Fixed-mounted probe is connected to gauge with one meter flexible cable (39") NIST-Traceable Calibration Certificate & Test Report is optionally available Built-in calibration test plate on front of gauge housing Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 3" (76.2 mm) Minimum Sample Diameter 0.5" (12.7 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040 - 8.000" (1.0 - 200.0 mm) Resolution .001" (0.01 mm) Display 4½ - digit LCD display, 0.39" (10mm) high with push button illumination Velocity Range 3,250 - 39,000 ft/sec (1,000 - 12,000 m/sec) continuously adjustable Probe 5 MHz, .39" (10 mm) diameter Cable 39" (1m) 2-wire, long cable with fixed-mounted to gauge body Minimum Pipe Size 1" nominal (30mm) steel pipe Temp. Limits Ambient: 25 to 125° F (-5 to 50° C) Material: -15 to 140° F (-10 to 60° C) Calibration Plate 0.250" (6.35mm) steel plate, built into the front of the housing Battery Type 1x AA battery Battery Life 200 hours Weight Gauge: 7 ounces (200 g) Size 5.2" x 2.7" x 1.1" (131 x 68 x 29 mm) Warranty Gauge: 1 years Probe: 90 days Accessories Included 2 Ounce bottle of couplant Related Products NIST-Traceable Steel Test Block 3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data TI-45N Ultrasonic Wall Thickness Gauge Resolution of 0.001" (0.01mm) SB4 Steel Test Block without certification For convenient confirmation of thickness gauge calibration Downloads Checkline TI-44NA Ultrasonic Wall Thickness Gauge - Certificate Checkline TI-44NA Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-44na-ultrasonic-wall-thickness-gauge-p-863.html Tue, 07 Feb 2023 19:18:12 +0000 USD 863 Checkline 995 TI-44N https://www.abqindustrial.net/store/images/TI-44N.jpg Checkline P-25DL Portable Printer for TI-25DL https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-p-25dl-portable-printer-for-ti-25dl-p-1214.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1214 ]]>Price: The P-25DL has been discontinued P-25DL Printer for UT gauges The P-25DL is a battery powered, portable Dot-Matrix printer for the TI-25DL Ultrasonic Wall Thickness Gauge Features Small, portable and easy to use Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge Specifications Print Method Impact Dot Matrix Dimensions 7" x 4" x 3-3/4" Print Speed 40 lines per minute Interface RS232, 25 pin connector Power Internal battery or 7.5 V DC, 750 mA adapter Interface RS232, 25 pin connector Warranty 1 year Related Products TI-25DL Data Logging Wall Thickness Gauge Resolution of 0.001" (0.01 mm) Selectable units of inch or mm Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-p-25dl-portable-printer-for-ti-25dl-p-1214.html Mon, 26 Jun 2023 19:09:38 +0000 USD 1214 Checkline 1000 P-25DL https://www.abqindustrial.net/store/images/P-25DL%20Portable%20Printer%20for%20TI-25DL.jpg Checkline TI-45NHD Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-45nhd-ultrasonic-wall-thickness-gauge-p-1223.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1223 ]]>General Purpose Wall Thickness Gauge for measuring on a variety of materials with protective rubber shell Range: 0.040 - 8.00 inches 1.00 - 200.00 mm Measuring Range in Steel 0.040 - 8.00 inches 1.00 - 200.0 mm The new CHECK-LINE TI-45NHD Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! The attractive, ergonomic housing design is extremely compact, lightweight and rugged. It fits comfortably in the palm of your hand and incorporates a back light that illuminates the LCD in poorly lit areas. Features Resolution of 0.001" (0.01mm) Extremely compact & lightweight Switch-selectable units - inches or mm Built-in calibration test plate Quick display update with last reading retained on the display Display symbols alert user to poor coupling and low battery conditions Photo Gallery Complete Kit The TI-45NHD is supplied as a complete kit with the gauge and wrist strap, probe and cable assembly, 2 oz. bottle of coupling fluid, batteries and instruction manual -- all supplied in a fitted, hard plastic carrying. Measuring Limits Minimum Radius for Convex Surfaces 1" (25.4 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 3" (76.2 mm) Minimum Sample Diameter 0.5" (12.7 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Range in Steel 0.040 - 8.000" (1.0 - 200.0 mm) Resolution .001" (0.01 mm) Display 4½ - digit LCD display, 0.39" (10mm) high with push button illumination Velocity Range 3,250 - 39,000 ft/sec (1,000 - 12,000 m/sec) continuously adjustable Probe 5 MHz, .39" (10 mm) diameter without Centering Shell Cable 39" (1m) 2-wire, long cable with quick-disconnect connectors Minimum Pipe Size 1" nominal (30mm) steel pipe Temp. Limits Ambient: 25 to 125° F (-5 to 50° C) Material: -15 to 140° F (-10 to 60° C) Calibration Plate 0.250" (6.35mm) steel plate, built into the front of the housing Battery Type Two AA batteries Battery Life 200 hours Weight Gauge: 7 ounces (200 g) Size 5.2" x 2.7" x 1.1" (131 x 68 x 29 mm) Warranty Gauge: 1 years Probe: 90 days Accessories Included Fitted, hard-plastic carrying case, probe shell attachment, 2 oz. bottle of coupling fluid, 1 spare battery and operating instruction guide Related Products SB-Series Certified Steel Test Blocks Precision Machined and Finished Includes Wooden Storage Box Includes NIST-Traceable Report and Test Data SB4 Steel Test Block without certification CF-12 Coupling Fluid Temp Range: 0 - 200 °F, -18 - 93 °C 5Z10NDT-M 5mhz, 10mm Transducer for TI-45N and TI-40N Ultrasonic Thickness Gauges 5mhz, 10mm Probe 39" Cable with 2 LEMO Connectors CS-5Z10NDT Centering Shell for CS-5Z10NDT Probe Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-45nhd-ultrasonic-wall-thickness-gauge-p-1223.html Mon, 26 Jun 2023 19:08:50 +0000 USD 1223 Checkline 996 TI-45NHD https://www.abqindustrial.net/store/images/TI-45NHD%20Ultrasonic%20Wall%20Thickness%20Gauge.jpg ElektroPhysik FH Series MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-fh-series-minitest-7200-and-7400-fh-magnetic-wall-thickness-gauge-p-1386.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1386 ]]>ElektroPhysik FH Series MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge for measuring thin walls of bottles, tubes, plates and more Range: 0.00 - 10.00mm Datalogging: YES Probe Sold Separately Choice of two (2) Models: FH-7200 - Basic Model FH-7400 - Enhanced display and statistics Choice of Five (5) Probes: FH4: 0 - 6 mm (0 - 0.236") FH4-1MM: 0 - 6 mm (0 - 0.236") FH4-M: 0 - 9 mm (0 - 0.354") FH10: 0 - 13 mm (0 - 0.512") FH10-M: 0 - 24 mm (0 - 0.945") The ElektroPhysik FH Series MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge is a portable thickness measuring device that offers the capability to precisely measure materials up to 10 mm thick. The small size and portability of the device enables it to be operated in production areas and quality laboratories. The FH Series provides easy, non-destructive and highly accurate thickness measurement on all types of non-ferrous products, regardless of their size, shape, and material. It is ideal for applications where accurate measurement of sharp corners, small radii and/or complex shapes are required. Two Models Model FH-7200 offers measurement capabilities including real-time thickness measurement, display of minimum and maximum readings, an offset mode, and automatic storage of up to 100,000 values. Model FH-7400 offers the same capabilities as the MiniTest 7200 FH plus statistical graphing, real time trend, data base with up to 200 batches and increased automatic storage of up to 240,000 values. e.g. 1200 per batch. 5 Probes to Choose FromIn order to maximize the accuracy of readings, five (5) easily interchangeable probes with a hardened probe tip and a variety of ball sizes are available to cover thickness ranges from 0 - 6mm up to 0 - 24. Refer to table below for detailed description of the various measuring ranges, ball diameters and ball type (non-magnetic and magnetic). Use of magnetic balls allow for measurement of thicker materials as both the probe and the ball have their own individual magnetic attraction properties. Kit Contents ElektroPhysik FH Series MiniTest 7200 or 7400 FH Magnetic Wall Thickness Gauge Multi-language Operating Instructions Four (4) AA batteries Protective Rubber Shell with stand and belt clip, and MSoft7 Pro Software on USB stick all supplied in a Foam-fitted hard plastic carrying case Probes are required for measuring and are sold separately The following accessories will be supplied based on the Probe Type purchased. FH4 Probe Magnetic Probe Protection sleeve and end cap Spring loaded probe holder / Table stand Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs) Zero calibration tip for 1.5mm, 2.5mm and 4.0mm balls Calibrations Standards: 0.25mm / 1mm / 3mm FH4-1MM Probe Magnetic Probe Protection sleeve and end cap Spring loaded probe holder / Table stand Non-Magnetic Balls; 1.0mm (100 pcs), 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs) Zero calibration tip for 1.0mm, 1.5mm, 2.5mm and 4.0mm balls Calibrations Standards: 0.15mm, 0.25mm, 1mm and 3mm FH4-M Probe Magnetic Probe Protection sleeve and end cap Spring loaded probe holder / Table stand Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs), 4.0mm (50 pcs) Magnetic Balls; 1.5mm (25 pcs) and 3.0mm (20 pcs) Zero calibration tip for 1.5mm, 2.5mm, 3.0mm and 4.0mm balls Calibrations Standards: 0.25mm, 1mm, 3mm and 8mm FH10 Probe Magnetic Probe Protection sleeve and end cap Spring loaded probe holder / Table stand Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs) and 9.0mm (10 pcs) Zero calibration tip for 2.5mm, 4mm, 6mm and 9mm balls Calibrations Standards: 1mm, 3mm and 8mm FH10-M Probe Magnetic Probe Protection sleeve and end cap Spring loaded probe holder / Table stand Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs) Magnetic Balls; 4.0mm (20 pcs), 6.0mm (20 pcs) and 9.0mm (10 pcs) Zero calibration tip for 2.5mm, 4.0mm, 6.0mm and 9.0mm balls Calibrations Standards: 1mm, 3mm, 8mm and 18mm Features Includes Calibration Certificate Traceable to PTB/Dakks Ideal for Bottles, Aluminum Cans, Glass and Plastic Components with Complex Shapes High precision target balls for reproducible measurements Data capture up to 20 data points per second Sensor-integrated digital signal processing Multi-point calibration up to 5 points Large, easy-to-read display Minimum and maximum readings Menu-controlled user interface Context-sensitive on-line help SPC capabilities FH4-1MM is a special probe designed to be used with 1mm diameter balls (and larger) to measure in extremely small cocave areas, gaps and recesses. Certified Calibration Standards Optional (inquire) Warranty 1-Year Made in Germany Specifications Measuring Range with FH4 Probe 0 - 6 mm (0 - 0.236"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement Measuring Range with FH4-1MM Probe 0 - 6 mm (0 - 0.236"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement (Includes additional calibration with 1mm diameter non-magnetic balls for use in small concave areas) Measuring Range with FH4-M Probe 0 - 9 mm (0 - 0.345"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement Measuring Range with FH10 Probe 0 - 13 mm (0 - 0.512"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement Measuring Range with FH10-M Probe 0 - 24 mm (0 - 0.945"), refer to Probe Type Table above for additonal details of ball sizes needed for measurement Accuracy with FH4 Probes 0-1. 5 mm: ± (3 µm + 1% of reading)0-2. 5 mm: ± (5 µm + 1% of reading)0-4.0 mm: ± (10 µm + 1% of reading) Accuracy with FH10 Probes 0-4.0 mm: ± (5 µm + 1% of reading)0-7.0 mm: ± (10 µm + 1% of reading)0-10.0 mm: ± (20 µm + 1% of reading)0-13.0 mm: ± (20 µm + 1% of reading)0-16.0 mm (magnetic):± (40 µm + 2% of reading)0-24.0 mm (magnetic:± (60 µm + 2% of reading) Low Range Resolution FH4: 0.1 µm | FH10: 0.2 µm Repeatability Better than ± (1 µm + 0.5 % of reading) Measuring Principle Magnetostatic Logging Rate 1, 2, 5, 10, 20 readings per second (selectable) Data Memory FH7200: 100,000 values | FH7400: 240,000 values Calibration Modes Factory, Zero, Zero + up to 4 points Measuring Units Metric: µm, mm | Imperial mils, inch Statistical Charting Numeric, trend, and histogram (with MiniTest 7400 FH only) Interfaces USB + IrDA 1.0 Probe Cable Length 1 meter (39") Operating temperature -10 °C to +60°C (Storage temperature: -20°C to +80°C) Dimensions 153 mm x 89 mm x 32 mm Weight 310 grams Power 4 x AA batteries, or optional AC adapter Warranty 1-Year DIN/ISO/ASTM/BSI Standards Conforms to DIN EN ISO 2178, DIN EN ISO 2360, DIN 50982, ASTM B499, ASTM B244 and BS 5411 Range Probe Type Overall Meas. Range Ball Diam. Ball Type Resulting Meas. Range FH4 0 - 6 mm0 - 0.236" 1.5 mm2.5 mm4.0 mm Non-MagneticNon-MagneticNon-Magnetic 0 - 2.0 mm0 - 3.5 mm0 - 6.0 mm FH4-1MM1 0 - 6 mm0 - 0.236" 1.0 mm1.5 mm2.5 mm4.0 mm Non-MagneticNon-MagneticNon-MagneticNon-Magnetic 0 - 1.3 mm0 - 2.0 mm0 - 3.5 mm0 - 6.0 mm FH4-M2 0 - 9 mm0 - 0.345" 1.5 mm2.5 mm4.0 mm1.5 mm3.0 mm Non-MagneticNon-MagneticNon-MagneticMagneticMagnetic 0 - 2.0 mm0 - 3.5 mm0 - 6.0 mm0 - 5.0 mm0 - 9.0 mm FH10 0 - 13 mm0 - 0.512" 2.5 mm4.0 mm6.0 mm9.0 mm Non-MagneticNon-MagneticNon-MagneticNon-Magnetic 0 - 4.0 mm0 - 7.0 mm0 - 10.0 mm0 - 13.0 mm FH10-M2 0 - 24 mm0 - 0.945" 2.5 mm4.0 mm6.0 mm9.0 mm4.0 mm6.0 mm Non-MagneticNon-MagneticNon-MagneticNon-MagneticMagneticMagnetic 0 - 4.0 mm0 - 7.0 mm0 - 10.0 mm0 - 13.0 mm0 - 16.0 mm0 - 24.0 mm Includes additional calibration with 1mm diameter balls for use in small concave areas Use of Magnetic balls allows for extended measuring range Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-fh-series-minitest-7200-and-7400-fh-magnetic-wall-thickness-gauge-p-1386.html Thu, 29 Jun 2023 21:18:41 +0000 USD 1386 ElektroPhysik 993 FH-Series https://www.abqindustrial.net/store/images/FH_Series.jpg Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25px-adjustable-velocity-ultrasonic-wall-thickness-gauge-p-1747.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1747 ]]>Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm The Checkline TI-25PX Wall Thickness Gauge is designed for measuring wall thickness and the extent of corrosion on a wide range of materials. It is commonly used for checking the thickness of pipes, tanks, plates and other objects. It is designed and built to withstand harsh industrial conditions and is backed by a 5 year limited warranty. The Checkline TI-25PX allows the operator to adjust the acoustic velocity (speed of sound through a given material) from 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec. The programmed velocity can be locked to prevent accidental adjustment. It is commonly used for applications where only a single material type is tested. Kit Contents Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Selectable Backlight ON/OFF/AUTO Acoustic Velocity (calibration) is manually adjusted via the keypad Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The Transducer (probe) is waterproof and can be submerged in shallow water The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Operates on two (2) AA Batteries - 45 hours continuous operation Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.040-6.000 inches 1.00-150.0 mm (with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Weight 308 grams (11 ounces) Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Certifications NIST Traceable and MIL-STD-45662A To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25PX Adjustable Velocity Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25px-adjustable-velocity-ultrasonic-wall-thickness-gauge-p-1747.html Tue, 07 Feb 2023 19:18:17 +0000 USD 1747 Checkline 993 TI-25PX https://www.abqindustrial.net/store/images/TI-25PX-Adjustable-Velocity-Ultrasonic-Wall-Thickness-Gauge.jpg Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25sx-general-purpose-ultrasonic-wall-thickness-gauge-p-1748.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1748 ]]>Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge with 8 Presets and Adjustable Velocity Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm The Checkline TI-25SX allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The calibration can be locked to prevent any accidental adjustments. The preset materials are as follows: Steel 4340 Stainless 303 Aluminum 2024 Cast Iron Plexiglass PVC Polystyrene Polyurethane Custom1 Custom2 Kit Contents Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.001 inch (0.01 mm) The Transducer (probe) is waterproof and can be submerged in shallow water Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Switch-selected units for inches or mm The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Acoustic Velocity (calibration) is manually adjusted via the keypad 5 Year Warranty, CE-Certified and Made in USA Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.004 inch (0.1 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25SX General Purpose Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25sx-general-purpose-ultrasonic-wall-thickness-gauge-p-1748.html Thu, 24 Feb 2022 20:24:47 +0000 USD 1748 Checkline 981 TI-25SX https://www.abqindustrial.net/store/images/TI-25SX-General-Purpose-Ultrasonic-Wall-Thickness-Gauge.jpg Checkline TI-25MX Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mx-ultrasonic-wall-thickness-gauge-p-1749.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1749 ]]>Checkline TI-25MX Ultrasonic Wall Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm The Checkline TI-25MX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Checkline TI-25MX combines the best features of the TI-25SX allowing the operator to select from 8 preset materials as well as program 2 custom material velocities. The preset materials are as follows: Steel 4340 Stainless 303 Aluminum 2024 Cast Iron Plexiglass PVC Polystyrene Polyurethane Custom1 Custom2 Additionally, the user can adjustment of the velocity as desired and calibrate to a sample of known thickness - the optimal acoustic velocity is automatically calculated. In special circumstances, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The calibration and other setup parameters can be locked to prevent any accidental adjustments. The calibration can be locked to prevent any accidental adjustments. The TI-25MX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25MX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Checkline TI-25MX Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm User-selected Manual or Auto Zero of Transducer User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Scan Mode 100 Hz (100 updates/sec), Displays the lowest reading found during a scan Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 64 x 131 x 32 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Warranty Gauge: 5 Years Probes: 90 Days Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge Downloads Checkline TI-25MX Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25MX Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mx-ultrasonic-wall-thickness-gauge-p-1749.html Thu, 24 Feb 2022 20:24:45 +0000 USD 1749 Checkline 995 TI-25MX https://www.abqindustrial.net/store/images/TI-25MX-Ultrasonic-Wall-Thickness-Gauge.jpg Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mxt-thru-paint-ultrasonic-wall-thickness-gauge-p-1750.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1750 ]]>Checkline TI-25MXT Thru-Paint Ultrasonic Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.040 to 8.00 inches / 1.00 to 199.9mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm Total Measuring Range (Probe Dependant) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.025 to 36.000 inches / 0.63 to 914.4 mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm The Checkline TI-25MXT Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from one side. When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. Checkline TI-25MXT Features include Automatic or Manual Probe Zero maximizing accuracy, 5-position Gain Adjustment to help located the correct backwall echo and to penetrate the walls on sound-attenuating materials such as cast metals and thick materials. It also features Differential mode, Hi-Low Alarms with audible and visual indicators and Scan mode that captures the minimum thickness at 100 measurements per second (100 Hz). It also includes a special Velocity Mode to measure in terms of velocity for nodularity testing. The gauge and probe have a protection rating of IP67, is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The TI-25MXT is covered by a 5-Year Limited Warranty, CE-certified and is proudly Made in the USA. The TI-25MXT can be used with any of the following hi-damped dual-element transducers specifically designed for use with E-E Thru-Paint Mode. T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Differential mode, Hi-Low Alarms with audible and visual indicators User-selected Manual or Auto Zero of Transducer The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Selectable Backlight ON/OFF/AUTO Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters) Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters) (range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Time Dependent Gain (TDG) Used in both pulse-echo (P-E) and Echo-Echo (E-E) modes depending on transducer and frequency selected Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Pulser 150 volt square wave pulser Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-25MXT Thru-Paint Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25mxt-thru-paint-ultrasonic-wall-thickness-gauge-p-1750.html Thu, 24 Feb 2022 20:24:46 +0000 USD 1750 Checkline 994 TI-25MXT https://www.abqindustrial.net/store/images/TI-25MXT-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg Checkline TI-25DLX Data Logging Wall Thickness Gauge with USB Output https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlx-data-logging-wall-thickness-gauge-with-usb-output-p-1751.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1751 ]]>Checkline TI-25DLX Data-Logging Ultrasonic Wall Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Total Measuring Range (depends on material and transducer/probe type) 0.025 - 36.000 inches 0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-3300 probe) 0.025 - 6.00 inches 0.60 - 150.0 mm The Checkline TI-25DLX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) The Checkline TI-25DLX permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The calibration and other setup parameters can be locked to prevent any accidental adjustments. The TI-25DLX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions Kit Contents Checkline TI-25DLX Data Logging Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Hi/Low Alarm Limits with Visual Indicator of Out of Tolerance Readings Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO User-selected Manual or Auto Zero of Transducer Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type) Measuring Range (Steel) 0.025-6.000 inches 0.60-150.0 mm (with standard transducer T-102-3300) Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Modes Pulse-Echo (P-E), Differential Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25DLX Data Logging Wall Thickness Gauge with USB Output - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlx-data-logging-wall-thickness-gauge-with-usb-output-p-1751.html Thu, 24 Feb 2022 20:24:43 +0000 USD 1751 Checkline 1000 TI-25DLX https://www.abqindustrial.net/store/images/TI-25DLX-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge with Datalogging and USB Output https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlxt-thru-paint-ultrasonic-wall-thickness-gauge-with-datalogging-and-usb-output-p-1752.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1752 ]]>Checkline TI-25DLXT Data-Logging Thru-Paint Ultrasonic Thickness Gauge with 8 Presets, Adjustable Velocity and the ability to Calibrate to a Sample of Known Thickness Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.040 to 8.00 inches / 1.00 to 199.9mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm Total Measuring Range (Probe Dependant) Pulse-Echo (PE) Mode (Pit & Flaw Detection) - 0.025 to 36.000 inches / 0.63 to 914.4 mm Echo-Echo (EE) Mode (Through Paint & Coatings) - 0.100 to 1.000 inch / 2.54 to 25.40 mm The Checkline TI-25DLXT Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from one side. When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. The Checkline TI-25DLXT offers datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches and USB Output. Data can be transferred into any program in CSV format or viewed in Datacomm Software (free download). The TI-25DLXT permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocityand allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLXT's probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. The TI-25DLXT can be used with any of the following hi-damped dual-element transducers specifically designed for use with E-E Thru-Paint Mode. T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid 2 AA batteries USB output cable NIST-Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters) Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters) (range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 Years Probes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge with Datalogging and USB Output - Data Sheet Checkline TI-25DLXT Thru-Paint Ultrasonic Wall Thickness Gauge with Datalogging and USB Output - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-25dlxt-thru-paint-ultrasonic-wall-thickness-gauge-with-datalogging-and-usb-output-p-1752.html Thu, 24 Feb 2022 20:24:44 +0000 USD 1752 Checkline 997 TI-25DLXT https://www.abqindustrial.net/store/images/TI-25DLXT-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-1-ultrasonic-wall-thickness-gauge-z-300-0001-z-300-0003-p-1753.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1753 ]]>Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 Manually adjust velocity to calibrate to any material type Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range in Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003allows the operator to adjust the acoustic velocity (speed of sound through a given material) from 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec to calibrate the gauge for use on a wide variety of materials. The programmed velocity can be locked to prevent accidental adjustment. Typically used on applications where a single material type is tested. It is designed for measuring wall thickness and the extent of corrosion on a wide range of materials. It is commonly used for checking the thickness of pipes, tanks, plates and other objects. It is designed and built to withstand harsh industrial conditions and is backed by a 5 year limited warranty. Kit Contents Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate 5 Year Warranty, CE-Certified and Made in USA Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm Selectable Backlight ON/OFF/AUTO Acoustic Velocity (calibration) is manually adjusted via the keypad Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The Transducer (probe) is waterproof and can be submerged in shallow water The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Operates on two (2) AA Batteries - 45 hours continuous operation Specifications Total Measuring Range (steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Weight 308 grams (11 ounces) Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Certifications NIST Traceable and MIL-STD-45662A To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 - Data Sheet Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-1-ultrasonic-wall-thickness-gauge-z-300-0001-z-300-0003-p-1753.html Mon, 03 Jun 2024 17:48:56 +0000 USD 1753 Dakota Ultrasonics 960 ZX-1 https://www.abqindustrial.net/store/images/Dakota-ZX-1-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001/ Z-301-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-2-ultrasonic-wall-thickness-gauge-z-301-0001-z-301-0003-p-1754.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1754 ]]>Manual Velocity Adjustment or Select Material from 8 Presets Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches0.60 - 199.9 mm The Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 allows the operator to select from 8 preset materials as well as program 2 custom material velocities allowing the user to tune the calibration to be optimized for a specific type of material. The programmed velocity can be locked to prevent accidental adjustment. The preset materials are as follows: Steel 4340 .2330 n/μs / 5918 m/sec Stainless 303 .2230 / 5664 Aluminum 2024 .2510 / 6375 Cast Iron .1800 / 4572 Plexiglass .1060 / 2692 PVC .0940 / 2388 Polystyrene .0920 / 2337 Polyurethane .0700 / 1778 Custom Custom Kit Contents Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.001 inch (0.01 mm) The Transducer (probe) is waterproof and can be submerged in shallow water Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Switch-selected units for inches or mm The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Stability Indicator, Battery Indicator and units Acoustic Velocity (calibration) is manually adjusted via the keypad 5 Year Warranty, CE-Certified and Made in USA Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.004 inch (0.1 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003- Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 / Z-301-0003 - Data Sheet Dakota Ultrasonics ZX-2 Ultrasonic Wall Thickness Gauge Z-301-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-2-ultrasonic-wall-thickness-gauge-z-301-0001-z-301-0003-p-1754.html Mon, 03 Jun 2024 17:50:30 +0000 USD 1754 Dakota Ultrasonics 978 ZX-2 https://www.abqindustrial.net/store/images/ZX-2-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-3-ultrasonic-wall-thickness-gauge-z-302-0001-z-302-0003-p-1755.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1755 ]]>Calibrate to known thickness or Select Material from 8 Presets Resolution: .001" (0.01 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe combines the best features of the ZX-2 allowing the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-3 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions Kit Contents Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.001 inch (0.01 mm) Switch-selected units for inches or mm User-selected Manual or Auto Zero of Transducer User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Measuring Mode Pulse-Echo (P-E) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 with T-102-2000 Probe - Data Sheet Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-3-ultrasonic-wall-thickness-gauge-z-302-0001-z-302-0003-p-1755.html Mon, 03 Jun 2024 17:51:27 +0000 USD 1755 Dakota Ultrasonics 974 ZX-3 https://www.abqindustrial.net/store/images/ZX-3-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 / Z-303-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5-ultrasonic-wall-thickness-gauge-z-303-0001-z-303-0003-p-1756.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1756 ]]>Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 / Z-303-0003 with T-102-2000 Probe with Single-Value USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO | Single-Value USB Output Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-5 Wall Thickness GaugeZ-303-0001 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 is supplied with a USB-C port for transfer of a single data value to a PC or desired data collection program. It does NOT have any built-in memory. The ZX-5 permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The TI-25DLX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-5 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 With T-102-2000 Probe 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Hi/Low Alarm Limits with Visual Indicator of Out of Tolerance Readings Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Single value data output via USB port Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA User-selected Manual or Auto Zero of Transducer Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Includes NIST Traceable Calibration Certificate Specifications Total Measuring Range(Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range(Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Modes Pulse-Echo (P-E), Differential Output Type USB-C (single data value transfer, no built-in memory) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 / Z-303-0003 with T-102-2000 Probe - Instruction Manual (NEW MODEL) Dakota Ultrasonic Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 - Data Sheet Dakota Ultrasonics ZX-5 Ultrasonic Wall Thickness Gauge Z-303-0001 with T-102-2000 Probe - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5-ultrasonic-wall-thickness-gauge-z-303-0001-z-303-0003-p-1756.html Mon, 03 Jun 2024 17:53:01 +0000 USD 1756 Dakota Ultrasonics 991 ZX-5 https://www.abqindustrial.net/store/images/ZX-5-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5dl-data-logging-ultrasonic-wall-thickness-gauge-z-304-0001-z-304-0003-p-1757.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1757 ]]>Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: YES Total Measuring Range (depends on material and transducer/probe type)0.025 - 36.000 inches0.63 - 914.4 mm Measuring Range on Steel (with standard T-102-2000 probe)0.040 - 8.00 inches1.00 - 199.9 mm The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 Probe Z-304-0001 with USB Output permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. Kit Contents Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 Probe T-102-2000 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Includes NIST Traceable Calibration Certificate Data can be transferred into any program in ".csv" format or viewed in DAKVIEW4 Software (free download) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data values Selectable Backlight ON/OFF/AUTO User-selected Manual or Auto Zero of Transducer Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Specifications Total Measuring Range (Steel) 0.025 - 36.000 inches0.63 - 914.4 mm(depends on material and transducer/probe type) Measuring Range (Steel) 0.040-8.000 inches1.00-199.9 mm(with standard transducer T-102-2000) Resolution 0.001 inch (0.01 mm) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Update Rate 10 Hz (10 updates/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E) Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 - Instruction Manual (NEW MODEL) Dakota Ultrasonics ZX-5DL Data Logging Ultrasonic Wall Thickness Gauge Z-304-0001 / Z-304-0003 with USB Output - Data Sheet Dakota Ultrasonics ZX-5DL Data Logging Wall Thickness Gauge Z-304-0001 with USB Output - Instruction Manual (OLD MODEL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-5dl-data-logging-ultrasonic-wall-thickness-gauge-z-304-0001-z-304-0003-p-1757.html Mon, 03 Jun 2024 17:54:29 +0000 USD 1757 Dakota Ultrasonics 997 ZX-5DL https://www.abqindustrial.net/store/images/ZX-5DL-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6-through-paint-ultrasonic-thickness-gauge-z-305-0001-z-305-0003-p-1758.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1758 ]]>Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NOSingle - Value USB Output Total Measuring Range Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.025 to 36.000 inches0.63 to 914.4 mm Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm Acutal range depends upon probe selected) - five probes to choose from Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo Mode (Pit & Flaw Detection) PE Mode0.040 to 8.00 inches1.00 to 199.9mm Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 Features include Automatic or Manual Probe Zero maximizing accuracy, 5-position Gain Adjustment to help located the correct backwall echo and to penetrate the walls on sound-attenuating materials such as cast metals and thick materials. It also features Differential mode, Hi-Low Alarms with audible and visual indicators and Scan mode that captures the minimum thickness at 100 measurements per second (100 Hz). It also includes a special Velocity Mode to measure in terms of velocity for nodularity testing. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The gauge and probe have a protection rating of IP67, is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 is covered by a 5-Year Limited Warranty, CE-certified and is proudly Made in the USA. The Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 can be used with any of the following hi-damped dual-element transducers specifically designed for use when employing the E-E Thru-Paint Mode. Probes possibilities include: T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Differential mode, Hi-Low Alarms with audible and visual indicators User-selected Manual or Auto Zero of Transducer The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data Special-purpose probes are offered for a variety of applications (1 to 10 MHz) Single value data output via USB port Selectable Backlight ON/OFF/AUTO Resolution of 0.001 inch (0.01 mm) 5 Year Warranty, CE-Certified and Made in USA Includes NIST Traceable Calibration Certificate Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters)(range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Time Dependent Gain (TDG) Used in both pulse-echo (P-E) and Echo-Echo (E-E) modes depending on transducer and frequency selected Pulser 150 volt square wave pulser Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 - Instruction Manual (NEW MANUAL) Dakota Ultrasonics ZX-6 Through-Paint Ultrasonic Thickness Gauge Z-305-0001 / Z-305-0003 - Data Sheet Dakota Ultrasonics ZX-6 Thru-Paint Ultrasonic Wall Thickness Gauge Z-305-0001 - Instruction Manual (OLD MANUAL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6-through-paint-ultrasonic-thickness-gauge-z-305-0001-z-305-0003-p-1758.html Mon, 03 Jun 2024 17:56:06 +0000 USD 1758 Dakota Ultrasonics 989 ZX-6 https://www.abqindustrial.net/store/images/ZX-6-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6dl-thru-paint-ultrasonic-wall-thickness-gauge-z-306-0001-z-306-0003-p-1759.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1759 ]]>Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 with built-in memory & USB Output Calibrate to known thickness or Select Material from 8 Presets Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Built-in datalogging for 10,000 data values with USB Output Total Measuring Range Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.025 to 36.000 inches0.63 to 914.4 mmEcho-Echo Mode (Through Paint & Coatings) Echo-Echo Mode (Through Paint & Coatings) EE Mode0.100 to 1.000 inch2.54 to 25.40 mm (Acutal range depends upon probe selected) - five probes to choose from Measuring Range on Steel (with standard T-102-2700 probe) Pulse-Echo Mode (Pit & Flaw Detection)PE Mode0.040 to 8.00 inches1.00 to 199.9mm Echo-Echo Mode (Through Paint & Coatings)EE Mode0.100 to 1.000 inch2.54 to 25.40 mm The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!When operated in E-E Mode (Thru-Paint Mode), the coating is eliminated from the reading and the gauge will display only the thickness of the metal wall. Incorporates built-in datalogging for 10,000 values with 250 readings per batch, up to 40 separate batches with USB Output. Data can be transferred into any program in ".csv" format or viewed in DAKVIEW4 Software (free download) The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 permits the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions. The Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 can be used with any of the following hi-damped dual-element transducers specifically designed for use when employing the E-E Thru-Paint Mode. Probes possibilities include: T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement T-101-3700, 3/16" Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement T-102-2700, 1/4" Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe T-102-3700, 1/4" Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement T-104-2700, 1/2" Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement T-104-9700, 1/2" diameter, 3.5 MHz Hi-Damped transducer for thru paint measurement Kit Contents Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 Probe T-102-2700 4 oz. bottle of coupling fluid 2 AA batteries NIST Traceable Calibration Certificate Carrying Case Instruction Manual Features Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output. Data can be transferred into any program in ".csv" format or viewed in Datacomm Software (free download) Includes both Pulse-Echo Mode (Pit & Flaw Detection) and Echo-Echo Mode (Through Paint & Coatings Mode) Using the standard probe T-102-2700, the gauge will read thru 0.040" coating thickness (1 mm) Using one of the optional probes T-104-2700, the gauge will read thru 0.075" coating thickness (1.9 mm) User can select from 8 preset materials as well as program 2 custom material velocities Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications Special-purpose probes are offered for a variety of applications (1 to 10 MHz) The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65) to provide trouble-free operation under the toughest field conditions High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero, units and stored data values Switch-selected units for inches or mm with Resolution of 0.001 inch (0.01 mm) Selectable Backlight ON/OFF/AUTO 5 Year Warranty, CE-Certified and Made in USA Includes NIST Traceable Calibration Certificate Specifications Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)Echo-Echo Mode (Through Paint & Coatings) measures from 0.100 to 1.000 inch (2.54 to 25.40 millimeters)(range depends upon probe selected) - five probes to choose from Resolution 0.001 inch (0.01 mm) Velocity Range 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) Probe (Standard) 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700 Probe Wearface PEEK (Polyethylethylkytone) Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors Temp. Limits Ambient: -30 to 75° C (-22 to 167° F)Material: -20 to 100° C (0 to 200° F)High temperature probes available Battery Type 2x AA batteries (rechargeable batteries can be used) Battery Life 45 hours continuous use Weight 308 grams (11 ounces) Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25") Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Rating IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off GAIN Adjustment Adjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB Measuring Mode Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity Output Type USB-C (plug-n-play, view files on PC which can be dragged and dropped) Built-In Memory 10,000 data values stored in up to 40 batches with 250 values/batch Memory Type Sequential data file (single column) Warranty Gauge: 5 YearsProbes: 90 Days Measuring Limits Minimum Radius for Convex Surfaces 0.350" (8.89 mm) Minimum Radius for Concave Surfaces 3" (76.2 mm) Minimum Headroom 1" (25.0 mm) Minimum Sample Diameter 0.150" (3.8 mm) Minimum Substrate Thickness - F na Minimum Substrate Thickness - NFe na Related Products TI-25-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockUltrasonic Transducer Holder Downloads Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 - Instruction Manual (NEW MANUAL) Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 / Z-306-0003 - Data Sheet Dakota Ultrasonics ZX-6DL Thru-Paint Ultrasonic Wall Thickness Gauge Z-306-0001 - Instruction Manual (OLD MANUAL) Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-zx-6dl-thru-paint-ultrasonic-wall-thickness-gauge-z-306-0001-z-306-0003-p-1759.html Mon, 03 Jun 2024 17:58:44 +0000 USD 1759 Dakota Ultrasonics 996 ZX-6DL https://www.abqindustrial.net/store/images/ZX-6DL-Thru-Paint-Ultrasonic-Wall-Thickness-Gauge.jpg Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dlx-data-logging-precision-ultrasonic-wall-thickness-gauge-with-usb-output-p-1761.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1761 ]]>Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output Resolution: .0001" (0.001 mm) Calibrate to known thickness or Select Material from 8 Presets 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducers up to 36.00" / 915.0 mm The Checkline TI-007DLX is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The TI-007DLX does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software. The TI-007DLX has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The TI-007DLX can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Kit Contents TI-007DLX Precision Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Large, backlit LCD display retains last reading Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Optional serial RS-232 or Bluetooth output IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25" (64 x 131 x 32 mm) Warranty Gauge: 5 Years Probes: 90 Days Total Measuring Range (Steel) 0.006 - 36.000 inches 0.15 - 924 mm (depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off Delay Line Tips for TI-007DLX P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder Downloads Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Data Sheet Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Instruction Manual Checkline TI-007DLX Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Add Couplant Notice Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007dlx-data-logging-precision-ultrasonic-wall-thickness-gauge-with-usb-output-p-1761.html Thu, 24 Feb 2022 20:24:42 +0000 USD 1761 Checkline 999 TI-007DLX https://www.abqindustrial.net/store/images/TI-25DLX-Data-Logging-Wall-Thickness-Gauge-with-USB-Output.jpg Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-pzx-7-precision-ultrasonic-wall-thickness-gauge-z-307-0001-z-307-0002-p-1762.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1762 ]]>Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 for Thin Walls Resolution: .0001" (0.001 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Range with Standard Delay Line Transducer0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducersup to 36.00" / 915.0 mm The Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The PZX-7 has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The PZX-7 can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the PZX-7 does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required Kit Contents Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 T-402-5507 Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Resolution of 0.0001 inch (0.001 mm) Large, backlit LCD display retains last reading Selectable units of inch or mm Selectable Backlight ON/OFF/AUTO Includes NIST Traceable Calibration Certificate IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity USB Data output of single values for transfer to data collection devices (no internal memory) Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Optional serial RS-232 or Bluetooth output Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory)TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25"(64 x 131 x 32 mm) Warranty Gauge: 5 YearsProbes: 90 Days Total Measuring Range(Steel) 0.006 - 36.000 inches0.15 - 924 mm(depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Delay Line Tips for PZX-7 P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - Instruction Manual (NEW MODEL) PZX-7 Precision Ultrasonic Wall Thickness Gauge - Data Sheet PZX-7 Precision Ultrasonic Wall Thickness Gauge - Instruction Manual (OLD MODEL) Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-pzx-7-precision-ultrasonic-wall-thickness-gauge-z-307-0001-z-307-0002-p-1762.html Tue, 04 Jun 2024 20:34:39 +0000 USD 1762 Dakota Ultrasonics 988 PZX-7 https://www.abqindustrial.net/store/images/PZX-7-Series-Precision-Ultrasonic-Wall-Thickness-Gauge.jpg Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Z-308-0001 / Z-308-0002 with T-402-5507 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-dl-pzx-7dl-data-logging-precision-z-308-0001-z-308-0002-with-t-402-5507-p-1763.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1763 ]]>Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger with USB Output Resolution: .0001" (0.001 mm) Calibrate to known thickness or Select Material from 8 Presets 5-Year Warranty, Made in USA Datalogging: Built-in datalogging for 10,000 data values, USB Output Range with Standard Delay Line Transducer0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducersup to 36.00" / 915.0 mm The Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The PZX-7DL does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software. The PZX-7DL has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The PZX-7DL can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Kit Contents Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger With T-402-5507 Probe With Built-In Datalogger 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Large, backlit LCD display retains last reading Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm Includes NIST Traceable Calibration Certificate IP 65 Rated for protection even in the toughest field conditions 5 Year Warranty, CE-Certified and Made in USA Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Operates on two (2) AA Batteries - 45 hours continuous operation Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Optional serial RS-232 or Bluetooth output Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode Specifications Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Output Optional RS-232 and Bluetooth Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Output USB single value only (no internal memory)TI-007DLX for a model with build-in memory for 40,000 values USB output Operating Temperature -22 to 167F (-30 to 75C) Housing Protection IP65 Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25"(64 x 131 x 32 mm) Warranty Gauge: 5 YearsProbes: 90 Days Total Measuring Range(Steel) 0.006 - 36.000 inches0.15 - 924 mm(depends on material and transducer/probe type) Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Display Update Rate 10 Hz (10 updates/sec) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum productsSeven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gaugeThe LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gaugeThe LOCK icon will turn off Delay Line Tips for PZX-7DL P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products NIST-Traceable Steel Test Block3 Sizes Available Precision Machined and Finished Includes NIST Report and Test Data DataCommSoftware for Thickness Gauges TICC-MProtective Holder for Ultrasonic Gauges Constructed from heavy duty Cordura Nylon Built-in belt loop Uncertified Steel Test BlockFor Ultrasonic Gauges For convenient confirmation of thickness gauge calibration TI-CMX-UW-5050 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-BlockTransducer HolderThe V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas Downloads Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - Instruction Manual (NEW MODEL) PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Data Sheet PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Instruction Manual (OLD MODEL) Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pzx1-dl-pzx-7dl-data-logging-precision-z-308-0001-z-308-0002-with-t-402-5507-p-1763.html Tue, 04 Jun 2024 20:35:21 +0000 USD 1763 Dakota Ultrasonics 999 PZX-7DL https://www.abqindustrial.net/store/images/PZX-7-Series-Precision-Ultrasonic-Wall-Thickness-Gauge.jpg ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-420-ultrasonic-wall-thickness-gauge-p-1896.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1896 ]]>ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge Uses Pulse-Echo Principle of Ultrasonics Basic Ultrasonic Thickness Gauge with adjustable calibration for a wide range of materials Several Transducers are optionally available including one for High Temperature materials (350 °C) Automatic identification of probes The ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge is a basic straight forward ultrasonic thickness testing gauge for simple quick measurements. The MiniTest 420 incorporates a calibration block for zero adjustments and quick calibration. Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate. NIST Traceable Calibration Certificate optionally available at additional cost Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Uses Pulse-Echo Principle of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring Range Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8") (For ranges of other transducers see table) Resolution 0.01mm (0 - 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec Probe Standard transducer U5.0: 8mm (0.31") - (For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" - (130 X 73 X 24 mm) Accessories Included U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0 8 mm | 0.31" 5.0 MHz 0.8 - 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 - 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 - 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 - 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-420-ultrasonic-wall-thickness-gauge-p-1896.html Thu, 24 Feb 2022 20:22:42 +0000 USD 1896 ElektroPhysik 1000 420 https://www.abqindustrial.net/store/images/minitest-420-ultrasonic-wall-thickness-gauge.jpg ElektroPhysik MiniTest 430 Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-430-ultrasonic-wall-thickness-gauge-p-1912.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1912 ]]>Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Automatic identification of probes with Auto Probe Zero Several Transducers are optionally available including one for High Temperature materials (350 °C) Includes built-in datalogger with USB output Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate NIST Traceable Calibration Certificate optionally available at additional cost Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Automatic Probe Zero function Uses Pulse-Echo Principle of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring range Pulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8") (For ranges of other transducers see table) Resolution 0.01mm (0 – 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec preset sound velocity of 9 materials Measuring mode Pulse-Echo Standard: normal operation | Minimum : detection of thinnest point | Difference: deviation of reading to preset value| Alarm Scan High speed scan for high temperature surfaces Probe Standard transducer U5.0: 8mm (0.31") (For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Cable Software and data transmission cable Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" (130 X 73 X 24 mm) Accessories Included U5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), cable Data storage 10 groups with max. 500 values each Data interface USB Calibration automatic Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0 8 mm | 0.31" 5.0 MHz 0.8 – 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 – 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 – 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 – 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-430-ultrasonic-wall-thickness-gauge-p-1912.html Thu, 24 Feb 2022 20:22:41 +0000 USD 1912 ElektroPhysik 997 430 https://www.abqindustrial.net/store/images/minitest-430-ultrasonic-wall-thickness-gauge.jpg ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-440-ultrasonic-wall-thickness-gauge-p-1913.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1913 ]]>ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge Thru-Paint Mode (E-E) eliminates the Coating & only measures Wall Thickness Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Several Transducers are optionally available including one for High Temperature materials (350 °C) Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness The ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge is a sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method. 6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 °C. The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe. Uninterrupted scanning of a part for thinning is possible at the minimum mode. Features Includes Factory "Works" Calibration Certificate. NIST Traceable Calibration Certificate optionally available at additional cost Thru-Paint Mode (E-E) eliminates the Coating and only measures Wall Thickness Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE) Adjustable units inch/mm Resolution of 0.001" (0.01 mm) Automatic identification of probes Automatic Probe Zero function Uses Pulse-Echo (P-E) or Echo-Echo (E-E, thru-Paint) Principles of Ultrasonics Sensitivity can be set to "Auto" or "Manual" Several Transducers are optionally available including one for High Temperature materials (350 °C) Warranty 1-Year Made in Germany Specifications Measuring range Echo-Echo: 3 - 25 mm (0.12 - 0.98") Pulse Echo: With standard transducer U5.0E: 0.8 - 300 mm (0.03 - 11.8")(For ranges of other transducers see table) Resolution 0.01mm (0 – 99.9 mm), 0.1(> 100 mm) Display 128 x 64 pixels with backlight Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/secpreset sound velocity of 9 materials Measuring mode Pulse-Echo: Standard: normal operation | Minimum: detection of thinnest point | Difference: deviation of reading to preset value | Alarm Echo-Echo: Measurements through the coating Scan: High speed scan for high temperature surfaces Probe Standard transducer U5.0E: 8mm (0.31")(For diameter of other transducers see table) Operation Temperature -20 to 50°C (-4 to 122°F) Cable Software and data transmission cable Battery Type Two AA batteries Battery Life more than 80 hours under continuous operation Weight approx. 6.70 oz (190 g) Size 5.1 x 2.9 x 0.94" | (130 X 73 X 24 mm) Accessories Included U5.0E 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), cable Data storage 10 groups with max. 500 values each Data interface USB Calibration automatic Housing Protection IP40 Range Type Diameter Frequency Measuring Range U5.0E 8 mm 5.0 MHz 3 – 25 mm / 0.12 - 0.98 " (E-E) | 0.8 -300 mm / 0.031 - 11.8" (I-E) U5.0 8 mm | 0.31" 5.0 MHz 0.8 – 350 mm | 0.031 - 13.8" U2.0 12 mm | 0.47" 2.0 MHz 2.0 – 500 mm | 0.079 - 19.7" U7.5 6 mm | 0.24" 7.5 MHz 0.65 - 50 mm | 0.026 - 1.97" U10.0 4 mm | 0.16" 10.0 MHz 0.65 – 20 mm | 0.026 - 0.79" U5.0HT 13 mm | 0.51" 5.0 MHz 3.0 – 200 mm | 0.12 - 7.87" Type Material Temperature Application U5.0E -12-+60 °C measurements through the coating (E-E mode), standard transducer w ith I-E mode U5.0 -12 to 60 °C on flat surfaces or huge curvature radii U2.0 -12 to 60 °C rough surfaces such as cast iron U7.5 -12 to 60 °C thin w all thickness and small curvature radii U10.0 -12 to 60 °C small tube diameters U5.0HT -12 to 350 °C for temperatures up to 350 °C Downloads ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge - Data Sheet ElektroPhysik MiniTest 440 Ultrasonic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-minitest-440-ultrasonic-wall-thickness-gauge-p-1913.html Thu, 24 Feb 2022 20:22:40 +0000 USD 1913 ElektroPhysik 1000 440 https://www.abqindustrial.net/store/images/minitest-440-ultrasonic-wall-thickness-gauge.jpg Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007x-precision-ultrasonic-wall-thickness-gauge-p-1918.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1918 ]]>Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge Precision Ultrasonic Wall Thickness Gauge for Thin Walls Resolution: .0001" (0.001 mm) Includes NIST-Traceable Calibration Certificate, CE-Certified 5-Year Warranty, Made in USA Datalogging: NO Range with Standard Delay Line Transducer 0.0060" - 1.000" / 0.150 - 25.40 mm Range with Contact Transducers up to 36.00" / 915.0 mm The Checkline TI-007X is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The TI-007X has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000). Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode The TI-007X can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm). Although the TI-007X does not have any built-in memory, it can transfer single values (value on the display) via the USB port to a PC or compatible data collector. No Software is required. Kit Contents Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge Probe 4 oz. bottle of coupling fluid USB-C Data transfer cable 2 AA batteries NIST Traceable Calibration Certificate Carrying case Instruction Manual Features Includes NIST Traceable Calibration Certificate Resolution of 0.0001 inch (0.001 mm) Large, backlit LCD display retains last reading Selectable units of inch or mm Selectable Backlight ON/OFF/AUTO Optional serial RS-232 or Bluetooth output IP 65 Rated for protection even in the toughest field conditions Operates on two (2) AA Batteries - 45 hours continuous operation Powered by: 120MHz FPGA timing & 100 volt spike pulser Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS) Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity USB Data output of single values for transfer to data collection devices (no internal memory) Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz) CE-Certified Warranty: Gauge: 5 Years Probes: 90 Days Made in the USA Specifications Total Measuring Range | (Steel) 0.006 - 36.000 inches | 0.15 - 924 mm | (depends on material and transducer/probe type) Range with Standard Probe 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel Resolution 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution Measuring Modes Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) Gain Automatic time dependent gain (TDG) with manual override Velocity Range 0.0120 to .7300 in/μs (305 to 18,542 m/sec) Probe (Standard) 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) Probes (optional) Various Single Element Delay Line and Contact Transducers (5 to 20MHz) Cable 4 ft. (1.2 m) with Microdot/Lemo00 connector. Display Multi-function 7 segment 4.5 digit liquid crystal display with Back-light Display Backlight Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options Display Update Rate 10 Hz (10 updates/sec) Output USB single value only (no internal memory) TI-007DLX for a model with build-in memory for 40,000 values USB output Output Optional RS-232 and Bluetooth Operating Temperature -22 to 167F (-30 to 75C) Battery Type 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) Battery Life Typically operates for 35 hours on alkaline and 18 hours on NiCad Weight 11 ounces (308 grams) Dimensions 2.5 x 5.17 x 1.25" | (64 x 131 x 32 mm) Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) Housing Protection IP65 Certifications NIST Traceable and MIL-STD-45662A Keypad Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec) To Lock Settings With gauge powered off, press and hold the "+" key while powering on the gauge | The LOCK icon will be illuminated on the Display To unLock Settings With gauge powered off, press and hold the "-" key while powering on the gauge | The LOCK icon will turn off Warranty Gauge: 5 Years | Probes: 90 Days Delay Line Tips for TI-007X P/N Description Standard / Optional Image X-231-0000 1/4" x 3/8" for all metals (Short) Standard X-241-0000 1/4" x 1/2" for all metals (Long) Standard X-633-0000 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) OPTIONAL Related Products TI-25-UW-50 50 Foot Underwater Probe / Cable Assembly 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors V-Block Ultrasonic Transducer Holder TI-PVX Precision Ultrasonic A-scan Thickness Gauge Hardware AGC gain control for multiple echo and thru-paint measurement 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs Downloads Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Data Sheet Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Instruction Manual Checkline TI-007X Precision Ultrasonic Wall Thickness Gauge - Add Couplant Notice Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/checkline-ti-007x-precision-ultrasonic-wall-thickness-gauge-p-1918.html Thu, 24 Feb 2022 20:24:43 +0000 USD 1918 Checkline 998 TI-007X https://www.abqindustrial.net/store/images/ti-007x-precision-ultrasonic-wall-thickness-gauge.jpg ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge-p-2136.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2136 ]]>Eddy current testing Non-destructive measurement Measuring range up to 300 mm The ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge is a hand-held instrument designed to measure the thickness of refractory linings in kilns used in cement and brick production. Instead of the traditional method of drilling approx. 200 holes for inspection, the StratoTest only requires one single borehole for calibration, and from that point on it measures the lining thickness non-invasively. The electromagnetic measuring process is non-destructive and without danger to the operator. StratoTest 4500 C allows the operator to determine the lining thickness of cement, dolomite, magnetite, or fireclay bricks in rotary kilns quickly and thus helps to significantly reduce inspection times and effort. Refractory bricks undergo degradation resulting in a decrease in mechanical properties. In order to monitor the thickness of these bricks, ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge is the ideal tool to determine the state of the lining in industrial furnaces and rotary kilns. ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge works on the electromagnetic measurement principle using the metal of the kiln shell as a measuring reflector. When the disc-shaped probe approaches the kiln shell, its electromagnetic files change depending on the distance to the metal. Kit Contents StratoTest 4500 control unit Measuring probe N 300ST Probe handle and connecting cable Carrying case for use on site Plastic transport case Features Non-destructive measurement Measuring range up to 300 mm Immediate display of brick thickness Special measuring technique to eliminate influences of metal inclusions or microstructural change Easy data transfer via USB and Bluetooth Specifications Measuring Principle Eddy Current testing Material to be Measured Electrically non-conducting refractory bricks (not suitable for sheet metal construction or reinforced refractory concrete) Measuring Range 0 - 30 cm N300ST standard probe Resolution 0.1 cm Display LCD Panel Data Memory DIRECT mode: limited to the size of SD card ZONE-SECTION mode: more than 1,000,000 individual readings and 9,801 separate measurement series StratoTest C generally groups reading in series of measurements in one memory batch. StratoTest C features one DIRECT memory and 99 Zone memories (Zone/ APPL) combined with 99 memories for series of measurements (Section / Batch). Power supply 3 x AA (LR05) battery Battery ~ 150 hours (working without display illumination) Ambient temperature gauge: 0 °C - 60 °C | probe: 0 °C - 70 °C Downloads ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge-p-2136.html Mon, 27 Nov 2023 19:29:33 +0000 USD 2136 ElektroPhysik 1000 StratoTest-4500-C https://www.abqindustrial.net/store/images/elektrophysik-stratotest-4500-c-kiln-lining-thickness-gauge.jpg ElektroPhysik StratoTest-4100 Asphalt Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4100-asphalt-thickness-gauge-p-2137.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2137 ]]>Non-destructive measurement TP D-StB 12 approved Measuring range up to 400 mm The ElektroPhysik StratoTest-4100 Asphalt Thickness Gauge is designed for measuring the thickness of all non-metallic layers in the context of construction work, like bituminous mixtures (asphalt), blast furnace slag, concrete, etc. The measuring process is non-destructive and TP D-StB 12 approved (Technical testing regulations applicable for calculating surface thickness in road construction) to gauge individual and total thickness of layers in road construction. Use of the device in road constructions typically involves placing aluminum foil at the base of an asphalt layer yet to be applied. The foil gets packed in by the gravel mix and thus does not hamper the process of inter-layer bonding. Decades of experience have shown that the foils do not affect the stability of the asphalt layers. Unlike the core drill method, this does not damage the construction layer. The measuring reflectors can be located by a bar graph display on the measuring device or acoustically by the headphones included in the delivery. There are three kinds of probes available for special applications in the construction sector: N 100ST: Up to 100 mm to measure the covering layer in road construction N 400ST: Measuring range between 0 and 400 mm to measure the base and covering layers in road construction N 800ST: Up to 800mm Non-destructive thickness measurement of non-magnetic layers in the field of construction, e.g.: Asphalt, slag, gravel and concrete layers in road construction Concrete layers in landfill construction work Kit Contents StratoTest 4100 device Measuring probe N 400ST Foldable dolly for measuring Calibration plate Headphone 9 V bloc battery, type 6LR61 Plastic carrying case Features Non-destructive measurement TP D-StB 12 approved Measuring range up to 400 mm Direct display of thickness Unlimited measurements repeatedly at the same spot Easy location of the measuring reflectors Specifications Measuring Principle Eddy Current testing Measurable layers all non-metallic road layer materials Reflectors aluminium foils or sheets of different sizes Measuring Range 0 - 40 cm N400ST Standard Probe 0 - 10 cm N100ST Optional Probe 0 - 80 cm N800ST Optional Probe Resolution 0.1 cm @ 0 - 30 cm 0.2 cm @ 30 - 35 cm 0.4 cm @ 35 cm+ Tolerance of standard probe ± (0.1 cm +2 % of reading) @ 0 - 30 cm ± 2 % of reading @ 30 - 35 cm ± 2 % of reading @ 35 - 40 cm Display LCD Panel Data Memory DIRECT mode: approx. 500 single readings and statistical values SITE mode: approx. 6,000 single readings incl. statistics 5 site memories available with 300 stations each 4 measuring spots per station 5 layer material types per measuring spot Power supply 1 x 9 V alkaline battery Battery ~ 20 hours Ambient temperature gauge: 0 °C - 50 °C probe: 0 °C - 70 °C Downloads ElektroPhysik StratoTest-4500-C Kiln Lining Thickness Gauge - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-stratotest-4100-asphalt-thickness-gauge-p-2137.html Mon, 27 Nov 2023 19:29:22 +0000 USD 2137 ElektroPhysik 1000 StratoTest-4100 https://www.abqindustrial.net/store/images/elektrophysik-stratotest-4100-asphalt-thickness-gauge.jpg ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-80-190-0000-minitest-fh-magnetic-wall-thickness-gauge-p-2176.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2176 ]]>Magnetic Wall Thickness Gauge for Plastic Bottles, Titanium Turbine Blades, and more Ranges up to 24mm / 1" The ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge is designed for non-destructive measurements up to 24mm / 1". The ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge offers straightforward thickness measurements of non-magnetic materials such as plastic, glass, synthetics, non-magnetic metals, and composites. Components with complex geometries can also be measured with ease. An intelligent SIDSP sensor enables the ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge to provide high-precision measurement and reproducibility while compensating for the influence of temperatures in the measuring environment and in the object being measured. A wide range of sensors allows to adapt to different applications and measuring tasks. Thickness is determined by measuring the distance of a reference ball or wire to the sensor tip. The reference ball is attracted by a powerful magnet positioned directly behind the sensor tip. The steel target balls are treated according to a specialized ElektroPhysik procedure which allows reproducibility of test results of up to 0.5%. Special features such as an automatic calibration function for zero calibration and direct transfer of readings into a spreadsheet or CAQ system complement the high user comfort provided by the intuitive menu operation. Kit Contents ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge Solid plastic case for transport and storage 8 AA NiMH batteries (integrated, chargeable via USB) USB connection and charging cable Features High precision wall thickness measurement up to 24 mm Exceptional accuracy and repeatability through sensor-integrated digital signal processing (SIDSP®) 2 million readings storable in more than 200 batches Up to 20 readings per second Wear-resistant sensors with hardened sensor tips Direct data import into evaluation software Bluetooth, USB and RS 232 C interfaces IP 65 Water and Dust Resistance Specifications Low range resolution 0,1 μm (FH 4) 0,2 μm (FH10) Repeatability < ± (1 μm + 0,5 % of reading) Measuring principle Magnetostatic Logging rate 1, 2, 5, 10, 20 readings per second (selectable) Data memory 2,000,000 measured values in more than 200 measurement series Calibration Factory, Zero, Zero + up to 4 points Measuring units metric (μm, mm), imperial (mils, inch) Statistical charting Numeric, trend, and histogram Interfaces USB, Bluetooth, RS 232 C Operating temperature -10 °C - 60 °C(Storage temperature: ―20°C to +80°C) Dimensions and weight 195 mm x 120 mm x 50 mm / 775 g (device with batteries) Power supply 8 x NiMH AA rechargeable batteries chargeable via USB Technical Details Probe Overall Range Ball Diameter Ball Range FH2FH2-90 1.5mm2.5mm4.0mm 0 … 0.6mm0 … 1.3mm0 … 2.3mm FH2-MFH2-M-90 1.5mm1.5mm Magnetic2.5mm3.0mm Magnetic4.0mm 0 … 0.6mm0 … 2.0mm0 … 1.3mm0 … 4.5mm0 … 2.3mm FH-4FH4-90 0 - 6 mm0 - 0.236" 1.5mm2.5mm4.0mm 0 … 2.0mm0 … 3.5mm0 … 6.0mm FH4-1FH4-190 1.0mm1.5mm2.5mm4.0mm 0 ... 1.3mm0 … 2.0mm0 … 3.5mm0 … 6.0mm FH-4M 0 - 6 mm0 - 0.236" 1.5mm1.5mm Magnetic2.5mm3.0mm Magnetic4.0mm 0 … 2.0mm0 … 5.0 mm0 … 3.5mm0 … 9.0 mm0 … 6.0 mm FH4-WIREFH4-WIRE-90 ⌀ 0.66mm Wire⌀ 1.15mm Wire 0 … 7.0 mm0 … 13.0 mm FH10 0 - 13 mm0 - 0.512" 2.5mm4.0mm6.0mm 0 … 4.0mm0 … 7.0mm0 … 7.0mm FH10-M 2.5mm4.0mm4.0mm Magnetic6.0mm6.0mm Magnetic 0 … 4.0mm0 … 7.0mm0 … 16.0mm0 … 7.0mm0 … 24.0mm Note 1: Includes additional calibration with 1mm diameter balls for use in small concave areasNote 2: Use of Magnetic balls allows for extended measuring range Downloads ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge - Data Sheet ElektroPhysik 80-190-0000 MiniTest-FH Magnetic Wall Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/elektrophysik-80-190-0000-minitest-fh-magnetic-wall-thickness-gauge-p-2176.html Tue, 02 Jul 2024 18:03:55 +0000 USD 2176 ElektroPhysik 1000 80-190-0000 https://www.abqindustrial.net/store/images/elektrophysik-minitest-fh-magnetic-wall-thickness-gauge.jpg Dakota Ultrasonics CX Thickness Gauges https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cx-thickness-gauges-p-2183.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2183 ]]>Auto recognition, ensures correct probe is identified when transducer is changed Scan Mode at 16Hz, ideal for measuring a large surface area User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001") The Dakota CX Ultrasonic Material Thickness Gauges have all the features and functionality necessary for measuring material thickness and velocity on virtually any material - for a wide range of applications. Kit Contents Dakota Ultrasonics CX2 Ultrasonic Material Thickness Gauge - Z-310-0001 Dakota Ultrasonics CX2 Ultrasonic Material Thickness Gauge 5MHz ¼" right angle dual element transducer (TXC5M00CP-4) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX4 Ultrasonic Material Thickness Gauge - Z-311-0001 Dakota Ultrasonics CX4 Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX6-DL Ultrasonic Material Thickness Gauge - Z-312-0001 Dakota Ultrasonics CX6-DL Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Dakota Ultrasonics CX8-DL Ultrasonic Material Thickness Gauge - Z-313-0001 Dakota Ultrasonics CX8-DL Ultrasonic Material Thickness Gauge 5MHz ¼" HD right angle dual element transducer (TXC5M00CP-10) Ultrasonic couplant Plastic Transit Case 3 x Screen Protectors Wrist Harness 2 x AA batteries Operating Instructions Calibration certificate DakMaster® Software CD & USB Cable Features Auto recognition, ensures correct probe is identified when transducer is changed Scan Mode at 16Hz, ideal for measuring a large surface area User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001") Pulse Echo (PE), Echo Echo ThruPaint™ & Velocity (VM) measurement modes Hi & Lo limit indicators provides indication of problem areas Integrated zero disc, ensures maximum accuracy Stores up to 100,000 readings in up to 1,000 sequential batches Selectable reading rate of 4, 8, 16Hz (4, 8, 16 readings per second) Intelligent User definable limits for pass/fail indication Users are able to set upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch. Accurate A range of calibration options for accuracy and efficiency The Dakota Ultrasonics CX Thickness Gauges have a range of calibration options including the 1-Point calibration method. Users can also select one of 39 pre-set materials stored within the gauge or store up to three calibrations into the memory. Versatile Measures uncoated & coated surfaces Flexible & easy to use, the Dakota corrosion gauge range doesn’t just measure uncoated surfaces but can also measure coated surfaces. Using Echo Echo ThruPaint™ Mode (EE), coatings up to 2mm (80mils) are ignored. Specifications Operating Temperature -10 to 50°C (14 to 122°F) Power Supply 2 x AA batteries Battery Life Alkaline: 15 hours Lithium: 28 hours Gauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.84 x 1.46"), without transducer Certificate Yes Comparison Chart Part Number CX2 CX4 CX6-DL CX8-DL Pulse Echo (PE) 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") 0.63 - 500mm (0.025 - 19.999") Echo Echo ThruPaint™ (EE) 2.54 - 20.00mm (0.100-0.787") 2.54 - 20.00mm (0.100-0.787") 2.54 - 20.00mm (0.100-0.787") Velocity Mode (VM) 1,250-10,000m/s (0.0492 - 0.3937in/μs) 1,250-10,000m/s (0.0492 - 0.3937in/μs) 1,250-10,000m/s (0.0492 - 0.3937in/μs) Measurement Accuracy Pulse Echo (PE) ±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm) ±0.1mm (0.63-19.99mm)±0.5% (20.00-500.00mm) ±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)±0.004" (0.025-0.393")±0.5% (0.394-20.00") ±0.05mm (0.63-9.99mm)±0.5% (10.00-500.00mm)±0.004" (0.025-0.393")±0.5% (0.394-20.00") Echo Echo ThruPaint™ (EE) ±0.1mm (2.54-25.4mm) ±0.1mm (2.54-25.4mm) ±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)±0.004" (0.100-0.393")±0.5% (0.394-0.787") ±0.05mm (2.54-9.99mm)±0.5% (10.00-20.00mm)±0.004" (0.100-0.393")±0.5% (0.394-0.787") Easy to use menu structure in multiple languages Tough, impact, waterproof and dust resistant equivalent to IP64 Bright colour screen; with permanent backlight Ambient light sensor, with adjustable brightness Scratch and solvent resistant display; 2.4" (6cm) TFT Large positive feedback buttons USB power supply; via PC Gauge software updates via DakMaster™ Software 2 year gauge warranty Limits: 40 definable audible & visual pass/fail warnings ― ― ― Measurement Mode Pulse Echo (PE) Echo Echo ThruPaint™ (EE) ― Velocity Mode (VM) ― ― Measurement Rate 4, 8, 16Hz ― 4Hz 4, 8, 16Hz 4, 8, 16Hz Thickness Range PE 0.63-500mm (0.025-19.999") ― EE 2.54 - 25.4mm (0.100-1.0") ― Measurement Units mm or inches ― m/s, inch/μs Repeatability / Stability Indicator Display Mode Reading ― Selected statistics ― ― Scan thickness bar graph ― ― Run Chart ― ― Readings and Differential ― ― ― B-Scan cross sectional display ― ― ― Selectable Reading Resolution Lo; 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs Hi; 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs ― ― Statistics Number of readings,n; Mean average, x ; Standard deviation, σ. ― ― Lowest reading, Lo; Highest reading, Hi ― ― Low / high limit value ― ― ― Reading Range Value ― ― ― Nominal Value ― ― ― Number of readings below the low limit ― ― ― Number of readings above the high limit ― ― ― Calibration Options Zero (using the integral zero disc) ― 1 - point ― 2 - point ― ― Material selection; 39 preset materials ― Factory; resets to the factory calibration ― Velocity (speed of sound) ― ― Known thickness value ― ― Calibration Features Calibration lock; with optional PIN Lock ― ― Test calibration feature ― ― Calibration memories: 3 programmable memories ― ― ― Measurement outside calibration warning ― ― ― Data Logging Number of readings ― ― 1,500 100,000 Number of batches ― ― 1 1,000 Sequential batching ― ― Grid batching ― ― ― Fixed Batch Size Mode; with batch linking ― ― ― Obstruct entry; add 'obst' into grid location ― ― ― Delete last reading ― ― Date & time stamp ― ― Review, clear & delete batches ― ― Alpha numeric batch names; user definable ― ― ― Batch review graph ― ― ― Data Output USB to PC ― Bluetooth® to PC, Android™ & iOS devices ― ― DakMaster™ software ― ― Transducer Probe Type Dual Element ― Auto transducer recognition Auto V-path correction Downloads Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Instruction Manual Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Declaration Conformity Dakota Ultrasonics CX2 & CX4 Material Thickness Gauge - Declaration Conformity UKCA Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Instruction Manual Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Declaration Conformity Dakota Ultrasonics CX6-DL & CX8-DL Material Thickness Gauge - Declaration Conformity UKCA Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-cx-thickness-gauges-p-2183.html Wed, 19 Jun 2024 03:41:36 +0000 USD 2183 Dakota Ultrasonics 2200 CX https://www.abqindustrial.net/store/images/dakota-cx-thickness-gauges.jpg Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pcx8-dl-precision-thickness-gauges-z-314-0001-p-2184.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=2184 ]]>Interface Echo (I-E) Echo-Echo (E-E) & Plastic Mode (PLAS) measurement modes Measurement range from 0.15mm (0.006") to 25.40mm (1.00") 2-Point, 1-Point, Material & Factory Calibration options The Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 range comes with all the features and functionality necessary for precisely measuring material thickness on virtually any material. AccurateMeasures thin materials with pinpoint accuracy Flexible & easy to use, the Dakota PCX Precision Thickness Gauge has a measurement range from 0.15mm (0.006") to 25.40mm (1.000") with up to ±1% accuracy, across three measurement modes; Interface Echo (IE), Echo Echo (EE) & Plastic mode (PLAS). PowerfulStore each measurement for further analysis Up to 100,000 readings can be saved into the gauge memory as each measurement is taken, which can be downloaded later into an inspection application or into DakMaster™ for further analysis and reporting. Wireless ConnectivitySeamlessly connect to PC Connect the Dakota PCX Precision Thickness Gauge via Bluetooth® or USB to a PC & download the data into an inspection application or into DakMaster™ Software for instant report generation. CustomisableChoose & customise the reading display The Dakota PCX Precision Thickness Gauge has a choice of display modes allowing the user to select the most appropriate for their needs; Readings, Selected Statistics, Bar Graph, Run Chart & Differential Mode. Measurement Modes Interface Echo (IE); The total thickness from the top of any coating through to the material density boundary (typically the back-wall) is measured. Suitable for measurement of materials between 1.65mm and 25.4mm (0.065" to 1") thick. Echo Echo (EE); ideal for measuring thin materials, the material thickness from the top surface of the material to the material density boundary (typically the backwall) is measured. Suitable for measurement of materials between 0.15mm and 10.15mm (0.006" to 0.4") thick. Plastic Mode (PLAS); specifically used for measuring very thin plastics between 0.15mm and 5mm (0.006" to 0.197") thick. A graphite delay line is required when using this mode. User Definable Upper and Lower Limits The Dakota PCX Precision Thickness gauge has user definable upper and lower limits with audible and visual pass/fail warnings allowing the user to compare readings to predefined values. The Dakota PCX Precision Thickness Gauge can store up to 40 pre-programmed limits which can be set for individual readings or for each batch. If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas. Calibration Options The Dakota PCX Precision Thickness Gauge has a number of calibration options including the 1-Point & 2-Point method and Velocity. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane. The Dakota PCX Precision Thickness Gauge allows users to store into memory up to three calibrations. Once saved the user can select a calibration without the need to re-calibrate the gauge. Using the gauge’s alpha-numeric function, calibration memories can be re-named to suit the calibration setting. Kit Contents Dakota PCX8-DL Ultrasonic Precision Thickness Gauge 15MHz transducer (TXC15M0CM) Ultrasonic Couplant 3 x screen protectors Wrist harness 2 x AA batteries Plastic Transit Case Calibration Certificate USB Cable DakMaster™ Software Operating Instructions Features Easy to use menu structure in multiple languages Tough, impact, waterproof and dust resistant equivalent to IP64 Bright colour screen with permanent backlight Ambient light sensor, with adjustable brightness Scratch and solvent resistant display; 2.4" (6cm) TFT Large positive feedback buttons USB power supply; via PC Gauge software updates1 via DakMaster™ Software 2 year gauge warranty Limits: 40 definable audible & visual pass/fail warnings Measurement Mode Echo Echo (E-E) Interface Echo (I-E) Plastic Mode (PLAS) Measurement Rate 4, 8, 16Hz Thickness Range E-E 0.15 - 10.15mm (0.006-0.400") I-E 1.65 - 25.40mm (0.065-1.000") PLAS 0.15 - 5.00mm (0.006-0.197") Measurement Units mm or inches m/s, inch/μs Repeatability / Stability Indicator Display Mode Reading Selected statistics Scan thickness bar graph Readings and Differential Run Chart B-Scan cross sectional display Selectable Reading Resolution Lo; 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs Hi; 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs Statistics Number of readings,n; Mean average, x ; Standard deviation, σ. Lowest reading, Lo; Highest reading, Hi Low / high limit value Reading Range Value Nominal Value Number of readings below low limit Number of readings above high limit Calibration Options Zero (using the integral zero disc) 1 - point 2 - point Material selection; 39 preset materials Factory; resets to the factory calibration Velocity (speed of sound) Known thickness value Calibration Features Calibration lock; with optional PIN Lock Test calibration feature Calibration memories: 3 programmable memories Measurement outside calibration warning Data Logging Number of readings: 100,000 Number of batches: 1,000 Sequential batching Grid batching Fixed Batch Size Mode; with batch linking Obstruct entry; add 'obst' into grid location Delete last reading Date & time stamp Review, clear & delete batches Display Mode Alpha numeric batch names; user definable Batch review graph Data Output USB to PC Bluetooth® to PC, Android™ & iOS devices DakMaster™ software Transducer Probe Type Single Element Auto transducer recognition Specifications Certificate Yes Measurement Range Interface Echo (IE) 1.65 - 25.40mm (0.065 - 1.00") Echo Echo (EE) 0.15 - 10.15mm (0.006 - 0.400") Measurement Accuracy Plastic Mode (PLAS) 0.15 - 5.00mm (0.006 - 0.197") Interface Echo (IE) ±0.015mm (1.65-2.99mm), ±0.5%(3.00-25.4mm) Plastic Mode (PLAS) ±0.015mm (0.15-2.99mm), ±0.5% (3.00-5.00mm) Operating Temperature -10 to 50°C (14 to 122°F) Power Supply 2 x AA batteries Battery Life Alkaline: 15 hours, Lithium: 28 hours Gauge Weight 210g (7.4oz) - including batteries, without transducer Gauge Dimensions 145 x 73 x 37mm (5.7 x 2.84 x 1.46"), without transducer Related Products Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Z-308-0001 / Z-308-0002 with T-402-5507 Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger with USB Output Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 Dakota Ultrasonics PZX1 (PZX-7) Precision Ultrasonic Wall Thickness Gauge Z-307-0001 / Z-307-0002 Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 ideal for applications with minimum access or contact areas. Enhanced graphic scope Displays A Scan & B Scan for a cross section view Downloads Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Instruction Manual Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Declaration Conformity Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 - Declaration Conformity UKCA Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List Albuquerque Industrial https://www.abqindustrial.net/store/ultrasonic-testing-equipment-c-100/ultrasonic-thickness-gauges-c-100_2/dakota-ultrasonics-pcx8-dl-precision-thickness-gauges-z-314-0001-p-2184.html Wed, 19 Jun 2024 03:42:54 +0000 USD 2184 Dakota Ultrasonics 1000 PCX8-DL https://www.abqindustrial.net/store/images/dakota-pcx8-dl-precision-thickness-gauges-z-314-0001.jpg