https://www.abqindustrial.net/store We offer an extensive line of precision measuring and test instrumentation. We continually strive to offer unparalleled VALUE & QUALITY product and service to our valued customers. en Copyright (c) 2024 Albuquerque Industrial info@abqindustrial.net (admin) info@abqindustrial.net (admin) Sat, 20 Jul 2024 20:21:29 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-lmi-lmc-yarn-consumption-meter-p-91.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=91 ]]>Checkline 200 Series Sample Cutter Designed to precisely cut samples of various materials, such as woven, non-woven, knitted fabric, carpet, films or paper 2 models available for cutting material up to 0.4" (10mm) thick Range: 0-99,999 Inches or Centimeters Checkline LMI / LMC Yarn Consumption Meter accurately measures the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions. Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Kit Contents LMI / LMC Yarn Consumption Meter Certificate of Compliance of the order 2.1 1 magnetic base 2 batteries Instruction  Transport packaging Features Magnetic mounting base and universal tube clamp for quick and easy setup Precision, ball-bearing-mounted, low-inertia measuring wheel is rubber coated to eliminate yarn slippage Surface-mount electronics and a rugged, metal housing provide trouble-free operation in tough production environments Powered by two AAA batteries (included) Specifications Range 0 –99,999 Inches (or cm) Accuracy +/- 0.2% of displayed value, +/- 1 digit Resolution 1 Inch (or 1 cm) Display LCD, 8mm high Measuring Wheel Access 4mm wide x 270 Operating Temperature 50 to 120 F (10 to 45 C) Pre-settable Cycle Capacity 0 –99 (LMI-S or LMI-C models only) Warranty 1 year Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-lmi-lmc-yarn-consumption-meter-p-91.html Mon, 29 Nov 2021 17:31:42 +0000 USD 91 Checkline 994 LMI/LMC https://www.abqindustrial.net/store/images/LMI-LMC.jpg Checkline LMI / LMC Yarn Consumption Meter

---

Magnetic mounting base and universal tube clamp for quick and easy setup

---

Precision, ball-bearing-mounted, low-inertia measuring wheel is rubber coated to eliminate yarn slippage

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-hp-textile-durometer-yarn-package-durometer-hardness-tester-p-92.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=92 ]]>Checkline HP Textile Durometer, Yarn Package Durometer Hardness Tester Constant-pressure indicating system assures uniform test pressure eliminating false readings due to differences between operators The Checkline HP Textile Durometers can accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc. Features Constant-pressure indicating system assures uniform test pressure eliminating false readings due to differences between operators. Supplied in a foam-fitted carrying case. Operation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line. Specifications Indenter Cone 35°, 1.3 mm Ø Depth of indentation 0 - 2.5 mm Test pressure approx. 12.5 N Measuring spring force 0.55 - 8.065 N Display range 0 - 100 Scale Scale diameter 56 mm Weight, net (gross) approx. 300g (500g) Dimensions 50 x 50 x 110 mm (L x W x H) Optional Accessories Model Number Indentor Ball Size Typical Application HP-2.5 2.5 mm Closely wound synthetic, hard finish fibers and filaments. HP-5 5.0 mm Average yarns, threads, fibers, etc., wound with moderate winding density. HP-5F 5.0 mm Same as HP5, except with flat base for large yarn packages over 15" (380 mm) in diameter. HP-10 10.0 mm Loosely wound spools of natural or synthetic yarns and fibers, bulky yarns. HP-10F 10.0 mm Same as HP10, except with flat base for large yarn packages over 15" (380 MM) in diameter. Downloads Checkline HP Textile Durometer - Data Sheet Checkline HP Textile Durometer - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-hp-textile-durometer-yarn-package-durometer-hardness-tester-p-92.html Sat, 13 Apr 2024 15:05:08 +0000 USD 92 Checkline 968 Yarn Package Hardness Tester https://www.abqindustrial.net/store/images/HP-Textile-Durometer.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-ysl-2000hd-yarn-meter-tachometer-p-94.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=94 ]]>Type: YSL-2000HD Combination Contact & Non-Contact Tachometer Measuring Range: Non-Contact - 1.00 - 99,999 rpm Contact - 1.00 - 19,999 rpm Display Type: LCD Housing Material: Plastic with rubber protective shell Warranty: 5 years The Checkline YSL-2000HD combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, wires and other filaments using a unique "wrapper" roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The YSL-2000HD can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of paper or fabric, etc Kit Contents YSL-2000HD Combination Contact & Non-Contact Tachometer Cone tip Universal surface speed wheel with integrated funnel tip adapter Reflective tape 2 AA batteries Instructions Carrying Case Features Slide-on measuring heads make it simple to rapidly convert from one function to another 5 Year Warranty Accuracy of ± 0.02% NIST Certification Included Built-in memory for last, maximum, minimum values Specifications RPM Non-Contact: 1.00 - 99,999 rpm Contact: 1.00 - 19,999 rpm Surface Speed 0.30 - 6,500 feet/min 0.10 - 1,999 meters/min 4.0 - 78,000 inches/min Length 0.01 - 99,999 feet 0.02 - 99,999 meters 1.0 - 99,999 inches Resolution .01 from 0 - 100 .1 from 100 - 1,000 1 from 1000 - 99,999 Yarn/Wire Diameter (max.) Yarn: 1mm Wire: 0.3mm Accuracy ± 0.02% of reading or 1 digit Display 5 - Digit LCD, 10mm high Decimal Point Automatic Memory System Maximum, minimum, and last reading (retained in memory for the life of the batteries) Measurement System Non-Contact: Visible LED light beam Contact: Contact adapter Sensing Distance Up to 14 inches (350mm) Display Update Time 0.5 seconds or one measuring Auto Power Off After 30 seconds of non-use (minimum, maximum and last reading retained in memory) Battery Life 20 hours continuous use Weight 6 ounces (170 grams) Housing Material ABS Plastic Operating Temp 32 to 122° F (0 to 50° C) Storage Temp -4 to 150° F (-20 to 70° C) Accessories Shaft extension, 3.15 inches (80 mm) Warranty 5 years Optional Accessories Linear Speed Length Revolutions feet/min feet rpm meters/min meters   inches/min inches   Downloads YSL-2000HD Yarn Meter - Data Sheet YSL-2000HD Yarn Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-ysl-2000hd-yarn-meter-tachometer-p-94.html Mon, 29 Nov 2021 17:34:33 +0000 USD 94 Checkline 995 YSL-2000HD https://www.abqindustrial.net/store/images/YSL-2000HD.jpg Type: Checkline YSL-2000HD Combination Contact & Non-Contact Tachometer

---

Measuring Range: Non-Contact - 1.00 - 99,999 rpm

---

Contact - 1.00 - 19,999 rpm

---

Display Type: LCD

---

Housing Material: Plastic with rubber protective shell

---

Warranty: 5 years

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-200-series-sample-cutter-p-384.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=384 ]]>Checkline 200 Series Sample Cutter Designed to precisely cut samples of various materials, such as woven, non-woven, knitted fabric, carpet, films or paper 2 models available for cutting material up to 0.4" (10mm) thick Model 230/100 Cuts material up to .4" (10mm) thick Model 240/100 Cuts material up to .12" (3mm) thick The Checkline 200 Series Sample Cutter is designed to precisely cut samples of various materials, such as woven, non-woven, knitted fabric, carpet, films or paper. Typical used to determination weight per unit area of fabric , paper etc Features For quick cuts with size of 100 cm² 4 High quality blades for precision cut Includes cutting board and 4 spare blades Specifications Area of Sample cutout 240/100: 100 cm² 230/100: 100 cm² 230/103: 1/100th yd² (no longer available) 230/50: 50 cm² 230/38: 12 cm² 230/10: 10 cm² Max Cutting thickness 240/100: 3mm 230/100: 10mm 230/103: 10mm 230/50: 5mm 230/38: 5mm 230/10: 5mm Sample Diameter 240/100: 113mm 230/100: 113mm 230/103: 103mm 230/50: 80mm 230/38: 38mm 230/10: 36mm Operating Procedure The material to be cut is placed between the Sample Cutter and the specially-designed Cutting Board. When the safety catch is released, light downward pressure on the handwheel brings the multiple blades into contact with the material. Specimens are cut by rotating the handwheel under a light, even pressure. The design, and precision manufacture of our instruments, ensures the specimens are perfectly circular and have smooth edges. A UKAS Calibration Certificate is available to validate the cutting accuracy. To maintain the cutting efficiency, the blades should be turned or changed when they become damaged or blunt, and the cutting board should be turned or changed when it becomes worn. For the best results use only the approved blades and boards. To determine weight per unit area, the cut specimen is transferred to a digital balance. Weigh a (100cm²) specimen in grammes, multiply the result by 100 and obtain instantly, grammes per square metre (g/m²) The Sartorius Talent Balance TE212 has a maximum weighing capacity of 210g, which caters for any material up to 2100g/m² Related Products AR-300 Area Weight Balance Automatic zero tracking and tare function Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-200-series-sample-cutter-p-384.html Thu, 03 Nov 2022 19:52:15 +0000 USD 384 Checkline 960 Sample Cutter https://www.abqindustrial.net/store/images/products/200-series-sample-cutter.jpg Checkline 200 Series Sample Cutter

---

Designed to precisely cut samples of various materials, such as woven, non-woven, knitted fabric, carpet, films or paper

---

2 models available for cutting material up to 0.4" (10mm) thick

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-ar-300-area-weight-balance-p-385.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=385 ]]>Price:This Product has been Replaced by EAR-300 Checkline AR-300 Area Weight Balance Range: 30000 g/m² or 300 g Range: 30000 g/m² or 300 g The Checkline AR-300 Area Weight Balance is designed to determine the area weight g/m² or weight gr of knitted fabric or paper etc. 2 Measuring modes: g/m² for fabric, paper or similar materials g to determine weight Features Automatic zero tracking and tare function Powered by supplied AC adapter or integrated rechargeable battery Supplied with calibration weight for recalibration Built in calibration routine Includes NIST Calibration Certificate Specifications Capacity 30000 g/m² Area weight mode 300 g Weight mode Resolution 1 g Area weight mode (g/m²) 0.01 g Weight mode Sample Size 100 cm² Power Supply DC 9 V - 500 mA, accumulator (12 hr continuous use, recharge time 12 hr) AC Adapter 115 V AC or 230 V AC Platform size Ø 120 mm Temperature range 50 - 113 °F (10 - 45 °C) Weight 3 lbs (1500 g) Dimensions 7.9" x 8.7" x 2.4" (200 x 220 x 60 mm) Related Products 200 Series Sample Cutter For quick cuts with size of 100 cm² Buy Now Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-ar-300-area-weight-balance-p-385.html Sat, 06 Jul 2024 15:39:32 +0000 USD 385 Checkline 998 AR-300 https://www.abqindustrial.net/store/images/products/AR-300-area-weight-balance.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2000-precision-material-thickness-gauge-p-386.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=386 ]]>Precision Material Thickness Gauge For textiles and non-woven textiles according to DIN EN ISO 5084 For fleece according to DIN EN ISO 9073-2 Thickness Gauge to determine the material thickness of all non-woven fabrics. With these instruments the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, etc. According to international standards DIN, EN and ISO Common Standards For textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa und 1 kPa) For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa) For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa)  Kit Contents Checkline D-2000 Precision Material Thickness Gauge Sub-D9/USB adapter cable USB AC adapter Calibration report Operating instructions Transport packing case Features Rigid housing frame Separate measuring block, incased against outside external impacts, for highest accuracy and repeatability Switch-selectable measuring units mm / inch RS 232 data output Resolution 0.01 mm - standard, 0.001 mm - optional Feeler movement manual by plunger Includes Calibration Certificate Optional software for data transfer and analysis - Part No. SW-50 Specifications Resolution 0.001 mm / 0.0001 inch Measuring range 0 - 25 mm / 1 inch Depth of jaws 200 mm Display LCD 6 digit, 8.5 mm high Measuring principle Capacitive Measuring pressure < 1.4 N Feeler shape a,b,c,d or e Lifting device Operating by lifting device - self closing Data output RS 232, optical coupling Power supply Battery 3 V Lithium, CR 2032 Temperature range 10 - 45°C Weight, net 1000 g Available Models Model Standard Application Feeler Ø mm Feeler cm² Test Pressure D-2000-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa D-2000-V1 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.5 kPa D-2000-V2 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.1 and 0.5 kPa D-2000-G1 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa D-2000-G2 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa, 20 kPa and 200 kPa D-2000-NW EN ISO 9073-2 Non-woven textiles 56.42 25 0.5 kPa and 1 kPa D-2000-P* DIN EN ISO 534 Paper 16 2 50 kPa and 100 kPa D-2000-HY DIN EN ISO 54540 Hygienic paper 56.42 25 2 kPa D-2000-L DIN EN ISO 2589 Leather 10 0.785 49,1 kPa D-2000-Gi Rubber 35.68 10 5 kPa Feeler Calotte D-2000-F* DIN 53370 Foil R 30 mm 0.5 N *D-2000-P and 2000-F supplied with a resolution of 0.001mm Options Code R Higher resolution 0.001 instead of 0.01 mm Code M Motorized feeler movement 2.5 mm/sec. operated by foot plug Code T Adjustable measuring time 2 to 32 seconds in 2 sec. steps Code E Higher measuring range 0... 25 mm Code V Adjustable measuring range 0 - 10 mm or 0 - 25 mm Code P Additional weights Code F Additional feeler shape according to customer specification DKD-Cal Calibration report from a DKD authorized laboratory Related Products J-40-TThickness Gauge Swing-out foot for on-table operation Digital display with selectable units inch or mm 500-FDDigital Thickness Gauge Operating by lifting device - self closing Resolution 0.001 mm (0.0001 inch) 500-JDDigital Thickness Gauge Operating by lifting device - self closing Easy to read LCD Display Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2000-precision-material-thickness-gauge-p-386.html Sat, 06 Jul 2024 15:38:21 +0000 USD 386 Checkline 1000 D-2000 https://www.abqindustrial.net/store/images/products/D-2000-Precision-Material-Thickness-gauge.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/mkm-mechanical-tension-meter-p-389.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=389 ]]>Motorized Take-up Wheel Designed for setting yarn tension devices MKM Tension Meter with take-up wheel, for for setting yarn tension devices Kit Contents MKM Mechanical Tension Meter Instruction manual Carrying case Features Motorized take up wheel for constant take-up speed (take-up speed ~16 m/min) Handle can be reversed for using the instrument comfortable in all positions Motor, rechargeable battery operated Everything in operator's view: the guide rollers, the measured material, the display Specifications Accuracy ±1% full scale (FS) or ±1graduation on scale   Scale diameter 41mm   Battery 9 V E-Block, rechargeable (charger included)   Operating Temperature 10-45ºC   Housing material Tension meter: Plastic (Makrolon) Frame: Aluminium   Operating Temperature 32 - 104° F (0-40° C)   Dimensions 225 x 50 x 30 mm (LxWxH)   Weight 400 g (1000 g) Ranges Model Range MKM-50 10-50 g MKM-100 10-100 g MKM-400 10-400 g Other tension ranges available on request. Other units of measure available, such as cN Operation We recommend always measuring the same number of ends, such as 5 or 10 ends (repeat of pattern) or only a single end at a time. During measurement make sure that the ends are not pulled or pressed out of their alignment Downloads MKM Mechanical Tension Meter - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/mkm-mechanical-tension-meter-p-389.html Mon, 24 Jun 2024 18:37:16 +0000 USD 389 1000 MKM https://www.abqindustrial.net/store/images/products/MKM.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-mst-tension-meter-with-motorized-take-up-p-390.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=390 ]]>Yarn Tension Meter For measuring and adjusting the tension of sewing machines to get best and highest quality stitched seams 3 Ranges Yarn tension meter with motorized take-up fixture for measuring and adjusting the tension of sewing machines to get best and highest quality stitched seams. Therefore e. g. yarn breaks can be adjusted under constant conditions (speed of the thread). To control the tension at sewing machines as well as the take-off tension of shuttles Kit Contents MST Tension Meter With Motorized Take-Up Suction cup base / post AC adapter / charger Instruction manual Carrying case Features Storage of last, average, MAX MIN, PEAK-MAX, PEAK-MIN values as well as statistical analysis (average value) during a user-selected period Motorized take-up fixture to have constant speed of the thread 12 m/min Suction-cup base for positioning the unit on the work plate when tension is measured at the sewing machine Special fixture to determine shuttle tension RS-232 output for batch download or real-time data transfer to TensionInspect Software TensionInspect Software plus RS-232 cable provided FREE Specifications Accuracy ±0.5 % from measuring value ±1 digit or better  Overload 20 % full scale, without accuracy guarantee  Overload protection 100%  Measuring frequency Max. 5 kHz  Damping Moving averaging  Display 4 digit, 11 mm high  Display update time 2 times/s  Memory Last, average, MAX, MIN, PEAK-MAX, PEAK-MIN  Output signal Analog: 0 - 2 V DC, linearized, conversion rate 30 Hz Digital: RS 232 (9600, 8, N, 1)  Vacuum base Adjustable height for measuring position above working plate 120 to 220 mm  Temperature range 10 - 45 °C  Air humidity 85 % RH, max.  Power supply LI-Ion Battery or 12 V AC Adapter for 230 V AC, option 115 V AC  Housing Materials Aluminium Ranges Model Range MST-500 0 - 500 g MST-1000 0 - 1000 g MST-2000 0 - 2000 g Downloads MST Tension Meter With Motorized Take-Up - Data Sheet Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-mst-tension-meter-with-motorized-take-up-p-390.html Mon, 26 Jun 2023 19:01:08 +0000 USD 390 Checkline 1000 MST https://www.abqindustrial.net/store/images/products/MST.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-mlt-portable-yarn-tension-rate-meter-p-722.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=722 ]]>Checkline MLT Portable Yarn Tension and Rate Meter Shorter setup times because existing items can be called up and repeated Uniform stitch length ensures a uniform fabric structure The Checkline MLT Portable Yarn Tension and Rate Meter is a stand-alone electronic apparatus for accurately measuring and displaying three (3) quality-critical parameters involved in knitting, namely, yarn consumption, yarn tension and yarn speed. All contribute to producing repeatable, uniform quality fabric and products from circular knitting machines with rotating needle cylinders and flat knitting machines, including all body, hosiery and sock machines. The Checkline MLT Portable Yarn Tension and Rate Meter displays the Normal, Average and Peak values for yarn tension. All values are shown on an easy to read back-lit LCD display. A unique, trigger-operated, yarn access system provides easy and sure yarn access and contact with a yarn tension-sensing pin and a yarn speed wheel, while a machine frame-mounted sensor counts revolutions every time a specific, rotating or moving magnetic part passes it, to provide machine RPM and yarn consumption information This easy-to-use instrument accumulates the data required to produce repeatable, uniform material and products from one machine to the next, even when using different cylinder diameters Kit Contents MLT Portable Yarn Tension And Rate Meter Battery Charger Revolution Sensor Data Transfer Cable Sensor Holder Magnet Carrying Case Features Accurately measures Machine Speed, Yarn Length, Yarn Tension and Yarn Speed, in selectable metric or English units Also displays yarn Normal, Average and Peak Tension values realized during the measuring periodd Battery-powered, lightweight and well-balanced for high portability and easy handling User can adjust the preset cylinder rotation count from 1 to 100 as desired MLT WESCO gauge supplied with Battery Charger, Revolution Sensor, Data Transfer Cable, Sensor Holder, Magnet, Calibration Kit supplied in Carrying Case 1-Year Warranty Specifications Power Supply Two 1.2 V rechargeable NiMH batteries  Battery Charger Primary, 100 to 240 V AC, 47 - 63 Hz; secondary 5 V, 2 A DC  LCD Digital Display 1 to 9,999 metres or inches  Max yarn speed 1,000 m/min or 1100 yd/min  Revolution measuring range 1 to 100 revolutions  Battery Life 50 hours in normal service  Battery stand-by time 300 hours  Yarn tension 0 - 50 cN (normal, average or peak value)  Accuracy ± 1 cm or ± 1 inch Downloads Checkline MLT Portable Yarn Tension & Rate Meter - Data Sheet Checkline MLT Portable Yarn Tension & Rate Meter - Instruction Manual Checkline MLT Portable Yarn Tension & Rate Meter - Spare Parts Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-mlt-portable-yarn-tension-rate-meter-p-722.html Mon, 29 Nov 2021 17:32:37 +0000 USD 722 Checkline 993 MLT https://www.abqindustrial.net/store/images/mlt-portable-yarn-tension-meter.jpg Yarn Tension Meter

---

Shorter setup times because existing items can be called up and repeated

---

Uniform stitch length ensures a uniform fabric structure

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/hans-schmidt-ear-300-area-weight-balance-p-1928.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1928 ]]>Hans-Schmidt EAR-300 Area Weight Balance Range: 30000 g/m² or 300 g Range: 30000 g/m² or 300 g The Hans-Schmidt EAR-300 Area Weight Balance is ideal to determine the gsm substance or determinate weight in grams of textilies as woven fabrics, fabrics, fleece, paper etc. 2 Measuring modes: g/m² for fabric, paper or similar materials g to determine weight Kit Contents EAR-300 Area Weight Balance Calibration weight 200 g AC Adapter 100 – 240 V AC Operating Instructions Features Automatic zero tracking and tare function Powered by supplied AC adapter or integrated rechargeable battery Supplied with calibration weight for recalibration Built in calibration routine Specifications Capacity 30000 g/m² Area weight mode 300 g Weight mode Resolution 1 g Area weight mode (g/m²) 0.01 g Weight mode Sample Size 100 cm² Power Supply DC 9 V - 500 mA, accumulator (12 hr continuous use, recharge time 12 hr) AC Adapter 100 – 240 V AC Platform size Ø 120 mm Temperature range 50 - 113 °F (10 - 45 °C) Weight, net (gross) Approx. 1700 g (2700 g) Dimensions 211x 185x 59mm (LxWxH) Downloads EAR-300 Area Weight Balance - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/hans-schmidt-ear-300-area-weight-balance-p-1928.html Mon, 29 Nov 2021 17:35:59 +0000 USD 1928 Hans-Schmidt 1000 EAR-300 https://www.abqindustrial.net/store/images/ear-300-area-weight-balance.jpg Area Weight Balance

---

Range: 30000 g/m² or 300 g

---

]]> https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2005-motorized-precision-material-thickness-gauge-p-1945.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1945 ]]>Checkline D-2005 Motorized Precision Material Thickness Gauge Resolution 0.01 mm - standard, 0.001 mm - optional The Checkline D-2005 Motorized Precision Material Thickness Gauge has a stable and rigid base frame with an encapsulated, separate measuring block. And is a top choice if you appreciate high precision (up to 0.001 mm), easy operation, automatic processing and objective, reproducible measurement results. The device can be adapted to the materials to be measured according to your requirements. Thus, the calliper surfaces, the calliper materials and the measurement pressures fit in exactly with the guidelines of ISO, EN, DIN or also with your own test regulations. Common StandardsFor textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa and 1 kPa)For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa) For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa) The D-2005 device is also available with different measurement ranges:Ranges 0 – 10 mm, 0 – 25 mm and 0 – 50 mm (or with the equivalents in inch, switchable). With this instrument the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, rubber, plastic films etc. This alternative to the D-2010 does not have an illuminated, menu controlled touch-screen with its statistics functions, instead it is equipped with a dial gauge with seven-segment display and individual keys. Of course, there is a data output for the digital processing of the measurement results. The model D-2005 is also available with special equipment for calliper dwell time gauging range preselection. Kit Contents D-2005 Motorized Precision Material Thickness Gauge Sub-D9/USB adapter cable USB AC adapter AC adapter Switch pedal Calibration report of manufacturer Transport packing case Instruction Manual Features Rigid housing frame Separate measuring block, encased against outside external impacts, for highest accuracy and repeatability Optional: Preselection of the measuring range Optional: Adjustable dwell time Footpedal included Switch-selectable measuring units mm / inch Optional: software for data transfer and analysis - Part No. SW-50 Motor-driven calliper movement Seven-segment display Resolution 0.01 mm - standard, 0.001 mm - optional (0.001 mm is standard for D-2005-P, D-2005-F) Specifications Measuring Range 0 - 10 mm, (25 mm optional, Code E) Resolution 0.001 mm Accuracy ± 0.002 mm Depth of jaw 160 mm Measuring system Capazitive -> Sylvac Display LCD 6 digit, 8.5 mm high Measuring unit mm or inch Preselection of the measuring range Optional Feeler shape and surface pressure According international standards DIN, EN and ISO Adjustable dwell time Optional Output signal RS 232 for printer and USB for PC Temperature range 10 - 45 °C Air humidity Max. 85 % r.H Dimensions 300 x 210 x 300 mm (LxWxH) Weight, net (gross) 23 kg Available Models Model Standard Application Feeler Ø mm Feeler cm² Test Pressure D-2005-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa D-2005-V1 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.5 kPa D-2005-V2 DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.1 and 0.5 kPa D-2005-G1 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa D-2005-G2 DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa, 20 kPa and 200 kPa D-2005-NW EN ISO 9073-2 Non-woven textiles 56.42 25 0.5 kPa and 1 kPa D-2005-P* DIN EN ISO 534 Paper 16 2 50 kPa and 100 kPa D-2005-HY DIN EN ISO 54540 Hygienic paper 56.42 25 2 kPa D-2005-L DIN EN ISO 2589 Leather 10 0.785 49,1 kPa D-2005-Gi Rubber 35.68 10 5 kPa FeelerCalotte D-2005-F* DIN 53370 Foil R 30 mm 0.5 N *Resolution 0.001 mm is standard Options Code R Higher resolution 0.001 instead of 0.01 mm(0.001 mm is standard for D-2005-P, D-2005-F) Code E Extended measuring range 0 - 25 mm Code E2 Extended measuring range 0 - 50 mm Code D Adjustable dwell time Code D2 Adjustable dwell time & measurement range Code P External power supply of the display DKD-Cal Calibration report from a DKD authorized laboratory Code S Software & Cable Comparison Chart D-2000 D-2005 D-2010 D-2020 Touch screen with menu control in English or German - - Seven-segment display - - Display illumination - - Statistics display - - Automatic zero point control - - Preselection of the measurment cycles - - Preselection of the measuring range - optional Adjustable dwell time - optional Motor-driven caliper movement - Connection for pedal - Manual caliper movement via a control lever - - - Automatic material infeed, adjustable - - - Digital interface Available scale divisions 0.001 mm, 0.01 mm Possible measuring ranges 0 - 10 mm, 0 - 25 mm, 0 - 50 mm LxWxH (for 0 - 10 mm range) 300 x 240 x 300 mm 300 x 210 x 300 mm 300 x 200 x 300 mm 300 x 300 x 320 mm Weight (for 0 - 10 mm range) 22.5 kg 23.0 kg 24.0 kg 31.5 kg Downloads D-2005 Motorized Precision Material Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-2005-motorized-precision-material-thickness-gauge-p-1945.html Sat, 06 Jul 2024 15:38:23 +0000 USD 1945 Checkline 1000 D-2005 https://www.abqindustrial.net/store/images/d-2005-motorized-precision-material-thickness-gauge.jpg https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-1000-precision-material-thickness-gauge-p-1957.html https://www.abqindustrial.net/store/index.php?main_page=product_reviews&products_id=1957 ]]>High Accuracy & Repeatability due to a rigid frame The standard resolution is 0.01 mm, with resolution of 0.001 mm available (Option R) 3 Ranges Standard 0-10mm (0-0.394") Option E25 0-25mm (0-1.000") Option E50 25-50mm (1-2.000") Resolution 0.01 or 0.001 mm The D-1000 Precision Material Thickness Gauge accurately measures a wide variety of materials including fabrics, various textiles, non-wovens, felt, fleece, geomaterials, floor coverings, leather, foils, rubber etc. Several different models are offered which supplied with specific contact footers providing a pre-determined test pressure as rewuired by various ASTM and DIN EN ISO norms and standards including: DIN EN ISO 5084 DIN EN ISO 9073-2 DIN EN ISO 9863-1 DIN EN ISO 54540 DIN EN ISO 2589 DIN 53370 DIN 53370 We can alos supply custom models to cover various standards. We require that you specify the footer diameter (or shape) and required test pressure (or Load). Kit Contents D-1000 Precision Material Thickness Gauge USB cable Calibration report of manufacturer Transport packing case Instruction Manual Features High Accuracy & Repeatability due to a rigid frame The standard resolution is 0.01 mm, with resolution of 0.001 mm available (Option R) The standard measuring range is 0 – 10 mm; 0 – 25 mm and 25 – 50 mm are optional available 95mm Throat Depth (center of measuring platform) Measurement Feeler is controlled by the Hand-Wheel on the side of the frame Optional USB interface Battery-operated. AC-Adapter optionally available Includes Manufacturer Calibration Certification Traceable Calibration Certification (DakkS) - OPTIONAL Customs models available with desired Footer Diameter/Shape and Desired Test Pressure Specifications Accuracy ±0.02 mm (0.001")±0.002 mm (0.0001") - Option Code R Measuring range (standard) 0 – 10 mm (0-0.400") Measuring Range (Option E25) 0 - 25 mm (0 - 1.000") Measuring Range (Option E50) 25 - 50 mm (1 - 2.000") Resolution (standard) 0.01 mm (0.001") Resolution (optional) 0.001 mm (0.00001"), Option Code R Throat Depth 95 mm / 3.75" (to center of platform) Display 6 digit LCD, 8.5 mm high Measuring Unit mm or inch (user-selected) Feeler Shape As per ISO, DIN or ASTM Sandard Feeler Diameter As per ISO, DIN or ASTM Sandard Output signal USB Battery 1 lithium battery 3 V, type CR2032, capacity of 220 mAh Battery Life Approx. 1 year Low Battery Indicator When "B" is shown on the display Temperature range 10 – 45 °C Dimensions 250 x 180 x 400 mm (L x W x H) Weight (net/gross) 12 kg (15 kg Available Models Model Standard Application Feeler Ø mm Feeler cm² Test Pressure D-1000-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa D-1000-V DIN EN ISO 9073-2 Standard Fleece 56.42 25 0.5 kPa D-1000-G DIN EN ISO 9863-1 Geomaterials 56.42 25 2 kPa D-1000-HY DIN EN ISO 54540 Hygienic paper 56.42 25 2 kPa D-1000-L DIN EN ISO 2589 Leather 10 0.785 49.1 kPa D-1000-Gi Rubber 35.68 10 5 kPa D-1000-F1 DIN 53370 Foil R 30 mm 0.5 N D-1000-F2 DIN 53370 Foil 7.5 0.442 0.9 N Downloads D-1000 Precision Material Thickness Gauge - Instruction Manual Albuquerque Industrial https://www.abqindustrial.net/store/textile-test-instruments-c-16/checkline-d-1000-precision-material-thickness-gauge-p-1957.html Sat, 06 Jul 2024 15:38:18 +0000 USD 1957 Checkline 1000 D-1000 https://www.abqindustrial.net/store/images/d-1000-precision-material-thickness-gauge.jpg